Apple is on fire after iPhone update

Common way to solve reboot problem on apple is DFU Mode

We can restore the gadget when iTunes does not recognize your device. But with these methods, all data will be erased.

For iPhone 6S, SE and below, please do this:

First we connect the device to the computer, turn on iTunes.

Press the Home and Power buttons at the same time, hold for 12 seconds, then release the Power button, but continue to hold the Home button until the iPhone is detected in iTunes.

Next, press the “Restore” button in the program and wait patiently while the iPhone reboots. If the above methods cannot solve the problem, try using Tenorshare ReiBoot.

For iPhone 7 and iPhone 7 Plus, please do this:

Press and hold the side button and volume down at the same time.

After 8 seconds, release the side button while continuing to hold the volume down button. If the Apple logo appears, the side button was held down for too long.

In DFU mode, there are no identification marks on the screen, the screen is completely black, iTunes will inform you that the device is in recovery mode. If your device displays a screen that says to connect your device to iTunes, repeat these steps.

Burning The iPhone 6 Plus. Molotov Cocktail Edition

For iPhone 8, iPhone 8 Plus, and iPhone X, please do this:

Press and quickly release the volume up button.

Press and quickly release the volume down button.

Press and hold the side button until the screen turns black, then press and hold the side button and volume down.

After 5 seconds, release the side button while continuing to hold the volume down button. If the Apple logo appears, the side button was held down for too long.

In DFU mode, there are no identification marks on the screen, the screen is completely black, iTunes will inform you that the device is in recovery mode. If your device displays a screen that says to connect your device to iTunes, repeat these steps.

If this method fails to fix the problem, try using Tenorshare ReiBoot.

apple, iphone, update

What to do if apple is on on iPhone but won’t turn on

Do not worry, now we offer 2 ways to get out of the restart on an apple: enter the iPhone into DFU mode, or to the service center, the most effective method is Tenorshare ReiBoot program.

iPhone X / 8/7 / SE / 6s / 6 / 5s / 5 keeps restarting on apple

For iPhone and iPad, after updating to iOS 11 and iOS 12, a problem arose, it often appears. it constantly reboots on an apple. Several situations can be distinguished: iPhone hangs on an apple and a blue screen; iPhone restarts on apple and red screen; iPhone hangs on an apple and restarts; iPhone does not turn on, lights up apple and turns off; iPhone does not turn on; Apple burns and restarts; iPhone does not turn on Apple flashes, etc.

Apple iPhone 6 vs Samsung Galaxy S5 ON FIRE

If you come across one of the above, you can fix them in the following ways.

Why iPhone X / 8/7 / SE / 6s / 6 / 5s / 5 hangs on the apple and turns off?

Everyone knows iPhone X / 8/7 / SE / 6s / 6/5 / 5s often have problems. Especially, when updating the firmware, it may not start, but show an apple, then either with one strip. What is causing this? Maybe the firmware is not compatible with your device. Or the problem is that the malfunction is caused by system crashes.

READ  How to sync iPhone to Apple Watch

An effective and fast way to solve the reboot problem on apple. Tenorshare ReiBoot

Click the button and download the Tenorshare ReiBoot software from the official website for free. Install the utility on your computer (there is support for Mac and Windows).

apple, iphone, update

Before restoring, you need to put your phone into recovery mode to see the device. Press and hold the Home and Power buttons at the same time, and then release the buttons until the connection to iTunes appears on the screen. Connect your iPhone to your computer using a USB cable. Then run Tenorshare ReiBoot software on PC, it will automatically recognize your device.

Click on the active Fix Now button. And select “Next”, the firmware will load.

Attention: Users should make a backup before starting. Tenorshare ReiBoot does not theoretically bring any data loss, but Tenorshare recommends backing up beforehand to prevent accidents.

After downloading, click “Start Repair”. A system restore is in progress and your phone will then reboot. The device will be ready for use. And your problem will be solved.

If the solutions did not help, then you should contact the service center. After replacing the screen or battery, the device restarts.

Tenorshare ReiBoot provides all users with five ways to enter and exit “recovery mode” for free. This will definitely fix some of the problems they have.

With such an overview, using the Tenorshare ReiBoot tool, you can solve not only this problem when the iPhone is frozen in headphone mode, but also others that may arise after updating iOS 11. For example, if your iPhone turned into a brick after installing the new iOS 11, or freezes on a call (during an incoming call). There may also be a situation when the phone is frozen on the cord and the iTunes icon, a black or blue screen, the display does not respond to touch. You can download the Tenorshare ReiBoot program for free on the official website of the developers.

The iPhone does not turn on but the apple on the screen is on. What to do?!

Popular smartphones from Apple, whatever one may say, this is the same computer, albeit a mobile one. And with him, like other representatives of this class of devices, troubles can happen. both hardware and software. One of the common reasons that can happen to them is when the iPhone does not turn on, but the apple is on after pressing the Power button.

People call this unpleasant problem the “white apple”. In fact, this is a certain state of the iPhone, which is characterized by the display of the company logo on the screen (a bitten glowing apple) when trying to turn on the smartphone. In this case, further loading of the device does not continue. At the same time, he does not react to anything and, as usual, does not turn off. How to be? The easiest thing to try is a Hard Reset. But, let’s take our time and consider all the options in order.

So, what can be done to restore the phone’s working capacity if the iPhone does not turn on and the apple is on? There are such methods:

Option 2. Reinstall iOS

If the first method did not help, you should try reinstalling the software on the iPhone. To do this, the iPhone launches in DFU mode. This is done like this. we connect the smartphone to the computer and launch the iTunes program. Next, hold down the Power and Home buttons. You need to hold it for about ten seconds. After this time, only the Power button must be released. After that, iTunes should see the device (the screen will remain dark at the same time). Well, then the program should offer to restore the device from a backup and reinstall iOS.

Then, after the device is restored. make a software update.

Option 1. Hard Reset

We turn off the iPhone using the Hard Reset method, that is, the so-called “hard reset”. To do this, you need to simultaneously hold down and hold down two buttons for 10 seconds: Home and Power. Keep out until the device turns on.

Option 3. Picking Cydia

This method is an alternative to the previous one in the event that you do not want to restore the device or for some reason cannot do it while the iPhone does not turn on and off, but the glowing apple is on.

READ  How to control TV via iPhone

Here I will make a small lyrical digression. The fact is that very often the reason that the iPhone does not turn on is the installation of some third-party application, which either did not get up correctly, or does not work correctly. Then you should try to remove it and restart your smartphone. Another equally common reason is Cydia tweaks.

To restore the performance of the iPhone, which has an apple on the screen and does not disappear, let’s try to load it without Cydia tweaks. To do this, turn off the device, press the volume up button. “” And hold it down, wait until iOS boots without Cydia tweaks. If the download is successful in this mode, the reason is clearly in the last installed Tweak. Delete it and the device will work again.

If it still does not boot, then restart it again. Then after 5 minutes, try calling your iPhone. If you manage to get through. great! This indicates that the phone’s loading is interrupted at the very last moment of the OS launch. Then you need to try to access the file system through the iTools or iFunBox programs and use them to look for the files that are responsible for the malfunction.

Otherwise, whether you like it or not, in order to remove the burning apple on the phone screen, you still have to reinstall the IOS using the method I described earlier.

Note: This manual is suitable not only for smartphones iPhone 4, 5 or 6, but also for iPad tablets, because both have one operating system installed, which means that an apple can burn on the iPad and it does not turn on and does not turn off. Good luck and stable work!

iPhone does not load beyond apple (does not load). what to do?

One of the most unpleasant problems that happen with smartphones from Apple. the iPhone does not boot beyond the apple.

When you try to turn on the phone, the company logo appears on the screen, but the system does not start. The error can appear on any model: iPhone 5, iPhone 6, iPhone 7.

Hard reboot

If the iPhone does not boot, the apple is on, first of all try to restore the device to working condition by performing a hard reset. Hard Reset.

Press Home and Power (on iPhone 7 and 7 Plus, the volume down key is used instead of Home). Hold them until the device turns on. If a hard reboot does not lead to anything, move on to another method. System Restore.

IPhone Recovery

The main disadvantage of restoring is deleting settings and content. If you recently made a backup, then the losses will be minimal, but still you cannot do without them. a working phone is more important. Since you are dealing with a software error, to fix it, you need to put the phone in DFU mode.

If the call does not go through, or you cannot find the files responsible for the error, then you will have to restore the iPhone to fix the problem.

An apple is lit on the iPhone screen and it does not turn on, what to do?

Depending on the iPhone model, the screen may display a white screen with an apple or a black background, depending on the color of the case. The background does not matter, if the logo appears and the iOS download stops there, follow the instructions. But first, let’s determine what happened to the phone.

It’s all about the battery

The most common and simple reason when an apple burns and the screen goes out on an iPhone. A person is sure that the phone is charged, and does not understand why it turns off immediately, starts looking for problems in other malfunctions. But everything is trite. the battery is out of order and needs to be changed or tried to calibrate. Will calibration help? It’s a moot point, it’s worth a try, that’s for sure.

To begin with, let’s try to recharge the phone battery again, but with the help of another charger, since the first one may simply be broken.

We remember if the iPhone turns on only before the apple and turns off immediately, first of all we try to change the memory, and only then we proceed to other, more radical methods.

IOS system error

Making a forced reboot

In 90% of cases, a hard reboot will remove most glitches and crashes when the iPhone 5 smartphone flashes an apple on the screen and does not turn on.

  • We disconnect the iPhone from the computer or laptop, since iTunes may interfere with the restart and switch the device to UDF mode, now we do not need it.
  • We simultaneously hold down two Home and Power buttons, wait 5-10 seconds, the phone should go into reboot.
READ  How to turn on flashlight on iPhone notifications

After rebooting, the logotype will appear again for a while, and after a minute you will see the loaded iOS, you can use the device in normal mode, and not try to install the crooked application that caused such problems. If the above methods did not help, then you will have to reflash the device.

Reflashing iPhone

It must be remembered that when flashing, all information is deleted, you will receive an absolutely clean phone with factory settings. Then you can restore everything, but provided that you have a saved backup in iTunes. In the absence of a backup copy, only an authorized service center will help to get information from the problem gadget, but for a decent price. Therefore, at least once a week, make a backup if you have important information on your iPhone.

How to reflash an iPhone was discussed in the article. If you don’t want to waste time reading, I’ll leave at the bottom a video instruction on how to reflash the device, if the iPhone 5 doesn’t turn on, the apple is on, and after a while the screen goes out.

Equipment setup

Hardware problems

Unfortunately, the reasons why the iPhone does not turn on and the apple on the screen is lit are very often problems with the hardware stuffing of the phone. And then flash it. don’t flash it, but it won’t work anyway. What could be the reason?

Unfortunately, only those who are friendly with a soldering iron and a multimeter can fix this kind of malfunction with their own hands, the rest of the users can only take it to the service center for repair.

iPhone won’t turn on and apple is on. what to do?!

Tablets and smartphones from Apple have long won the reputation of being fairly reliable devices. And the iOS operating system did not give any particular reason for criticism. Nevertheless, sometimes problems do happen. electronics, whatever one may say, are capricious thing. One of the frequent occurrences is that the iPhone does not turn on and the apple on the screen burns. On this, the phone freezes and you will not be able to turn it off in the usual way. There are quite a few probable reasons for the appearance of this trouble. Let’s try to figure them out and, if possible, try to fix it ourselves.

Software crash

If you have recently installed any application before, digging through the settings or tried to jailbreak, then with a high degree of probability we can say that this is exactly what causes a glitch and the appearance of a glowing apple. Very often the so-called “hard reset” helps. restarting the phone using the Home and Power buttons, which must be pressed and held for 8. 10 seconds. In more than half of such cases, the iPhone then boots up and works successfully. The main thing. do not forget to disconnect it from the computer or charger before that. Did not help? Then you should try to reflash the device. To do this, you need to launch iTunes on your computer, and then connect your iPhone to your computer with a USB cable. then turn it off by holding the Home and Power buttons. You need to hold it until the screen goes out, after which you need to release the Power button, but do not release Home. This will put the iPhone in DFU mode. The screen will be black, but a message should appear on the computer that the device is in recovery mode. Let go of the “Home” button. In the iTunes application, click the “Restore” button, after which the process of downloading and installing the new firmware on the phone will begin.

After this procedure, you will receive a “clean” device, without settings and additional programs, and the burning apple on the iPhone should disappear.