Black for printing on a printer

black, printing, printer

Solved: Printer does not print in color. HP Support Community

As far as I understand, you cannot print in color.

Don’t worry, I will be happy to help you, however, I will need a few more details to analyze your problem and provide an exact solution:

When was the last time everything worked fine?

Have you made any hardware / software changes?

Let’s try the following steps to fix the problem:

Run HP Print and Scan Doctor: ftp: //

Removing root and reinstalling printer drivers:

Default Printer to Print in Black Ink Only

  • Go to Control Panel. Programs and Features. select all entries for the HP OfficeJet printer and delete them.
  • Now go to Control Panel. Devices and printer. select all printer entries and delete the device.
  • Then press the “Windows key” “r” to open the “Run” window. type “printui.exe / s” and press Enter.
  • In the properties of the print server navigate to the drivers. delete all entries and there.
  • Go to the run window again, enter. “C: / programdata”. go to the Hewlett Packard folder, delete all folders and files associated with the printer.

How to set printer preferences

You can set printer preferences such as color or black and white printing, draft printing (using less ink) or high quality (darker, sharper image), and more. Fortunately, you can change these settings once for all documents you print.

Select Start.> Devices and Printers (in the Hardware and Sound group).

The “Devices and Printers” window that opens will list all the printers you have installed.

Right click on the printer and select “Printing Preferences”.

The Print Settings dialog box appears. The options in the Printing Preferences dialog box may vary slightly depending on your printer model; for example, color printers offer a variety of options other than black and white.

Click any tab to display various settings such as Color.

Note that different printers may display different selections and different tabs in this dialog, but general settings include

Color / Grayscale: If you have a color printer, you have the option to print in color. Grayscale uses only black ink.

Quality: You can print in fast or draft quality (these settings may be named differently depending on your manufacturer) to save ink, or you can print at a higher or better quality for your finished documents. Some printers offer a dpi quality setting. the higher the dpi setting, the better the quality.

Paper source: If you have a printer with more than one paper tray, you can choose which tray to use for printing. For example, you might have 8½ “by 11” (Letter size) paper in one tray and 8½ “by 14” (Legal) paper in the other.

Paper Size: Select the size of the paper or envelope for printing. In many cases, this option displays a preview that shows you which way to insert the paper. The preview is especially useful if you are printing on envelopes and need help figuring out how to insert them into the printer.

Click OK to close the dialog box and save your settings, and then click Close to close any other open control panel Windows.

Whatever settings you make using the procedure in this task, they are the default settings for all printing you do. However, when you print a document from a program such as the Works word processor, the Print dialog box displayed gives you the option to change the printer settings for that document only.

Can’t get my printer to print in color. HP Support Community

Try the following steps which should fix the problem.

black, printing, printer

Open “Devices and Printers” by clicking the “Start” button and then from the “Start” menu select “Devices and Printers”.

Right-click the printer you want to use, and then click Printing Options.

Under Print Color, select a color, then click the OK button.

The printer is now set to print in color.

Help the community by checking this post.
Has your question been answered? Mark this as an accepted solution !
See a great post? Rate it on Kudos !
Working for HP

Play Kudos to say thank you by clicking the thump up icon.

Print Only Black for a Single Print Job from Windows | HP Printers | HP

Click “Accept as solution” if this resolves your problem so others can find it.
Although I am an HP employee, I speak for myself, not HP.

How to change the print color on the printer

Installing color printing on the printer

  • We go to “Start”, then “Devices and Printers”.
  • Open the dialog box of the printer on which we will perform color printing.
  • In the “Properties” tab, open the “Color” or “Paper / quality” options (depending on the brand of the printer) and uncheck the “Print in grayscale” checkbox or change “Only black ink” to the function of multi-color printing.

You can adjust the contrast and vividness of the colors to keep the print quality high. This is done in the “Additional parameters” tab.

An article on how to put color printing on a printer was written with the support of the specialists of the copy center.

How to put a color print on a printer?

If your printer supports color printing, then color printing is fairly easy to set up. To do this, you must change the settings. But first you need to check the status of the tri-color cartridge of your printing device. it may be empty or damaged (in this case, color printing is not possible).

Help Online. Quick reference

If you are faced with the problem that you only get black and white output when you print the origin graph even though you have a color printer, you can try the following for troubleshooting:

Make sure your color / toner cartridge is not empty or blocked

This is the least likely cause of the problem, but should be checked. Most color printer drivers and / or software provide functions to check color alignment and output. See the manual or open the printer driver by clicking Start: Settings: Printers. right-click the icon for your printer and select Properties. In the Properties dialog box, find the options that perform a system check.

READ  Why does the printer print faintly when the cartridge is full?

Find the option “Print only black and white”

Open the printer driver Properties dialog box (see above) and look for a color option that uses only black. Uncheck or select an option that includes color. Some color printers have different resolutions for color and black and white (usually a higher resolution for black and white). Some applications (except Origin) force the printer to use a quality mode that affects this setting, and if the resolution is set to the maximum value, color output may be disabled.

Certain combinations of printers and operating system versions can lead to misunderstandings between Origin and the printer driver. Under these circumstances, Origin may “think” it is dealing with a black and white printer when it is actually using a color printer. The Origin Print dialog displays one of two checkboxes depending on the print capabilities read by Origin:

  • Include color as grayscale

This check box is displayed for color printers

This check box is displayed for black and white printers.

If you see the first checkbox and are using a color printer, then checking that checkbox should tell Origin to send all the color information and let the printer handle any transformations that might occur. Earlier versions of Origin had a rather cryptic checkbox called “Color printing on black and white printers “That did the same.

Cannot print black in Canon printer

Users often encounter one strange problem when a Canon printer after a long time no longer prints in black, although recently everything worked fine. Many of them start to panic immediately. In fact, there is no need to panic ahead of time until we figured out the reason.

It is believed that almost every user with a printer can face such problems. But, why can something like this happen? What should I do if my Canon printer does not print in black? Let’s try to figure it out together and understand what needs to be done in a similar situation.

Why Canon Printer Doesn’t Print in Black?

Quite often, we can come across this option when our problem is related to the fact that Canon’s print head is damaged. During such a malfunction, even a new cartridge is also not able to correct the situation. It is not very easy to give a diagnosis during such a problem. What should I do when my Canon printer stops printing in black? Perhaps the time has come to take our beloved printer to a specialist, to a service center. We recommend that you inform the specialists in detail about those suspicions that we have about the fact that head malfunctions are possible. They will consider this, and if it turns out that everything is so, you have a choice of several ways to develop this event.

The first option provides for the replacement of a broken element. The second option involves purchasing a new printer. Don’t panic ahead of time. After all, printhead damage is a fairly common problem. And it’s not a fact that your printer stopped printing in black for this reason. If for a start you want to exclude simpler reasons, then postpone the visit to the service center for a while.

Why Canon Black Ink Cartridge Doesn’t Print?

Another reason the printer may stop printing in black is clogging. If suddenly the Canon printer stops printing in black, and you do not know what to do, but you do not want to carry the device to the service center, then you can try to check yourself what happened. Try to print a test document. Suppose you did not succeed in performing this action, although the settings indicate that there is still black ink in the printer. Try using a printer-specific cleaning solution.
You need to drop this solution onto the print head and wait a little. When the cleaning is done, try again. If this works, you will no longer have to puzzle over the question of why the printer does not print in black. The problem was found and fixed. But what if rinsing the print head does not work? You can try to find the reason for this behavior elsewhere. Let’s try to figure out what else such a phenomenon can be connected with.

Canon black cartridge prints poorly

The most commonplace reason a printer can stop printing in black is when the printer just runs out of ink. At the same time, the computer may not inform the user about the problem. In this case, the Canon printer stops printing in black. What to do in this case? This, by the way, applies not only to the models listed above, but also to all other printing equipment. If the device runs out of ink, you will have to install a new ink cartridge in the device or refill the old one.
You can perform this procedure both independently and at a service center. Also, some models of printers require direct refilling of the cartridge using ink and a syringe. This procedure is most often carried out at home. After refilling the cartridge, shake it slightly and check. If the printer still won’t print in black, the problem was not with the ink. If after refueling the problem has disappeared, then in the future you need to carefully monitor the remaining amount of ink.

In some cases, printers may refuse to print because ink has been improperly infused into them. This can be associated with a host of problems. Quite often, the cause of the problem is a poorly performed refueling. What is it about? You may have had a bad seal on the cartridge or not fully inserted it into the equipment. Make sure the cartridge is in place.
This is usually indicated by a slight click. If the ink was poured into the equipment already inserted, then you will have to take the adhesive tape and stick it tightly on the “injection site.” This can correct the problem. After completing the above procedures, you should try again to check the functionality of the equipment. Perhaps, for some time, problems with printing documents will no longer bother you. However, this does not always happen.

| Message Posted on October 26, 2009. 11:34 PM Nigel

  • Offline
  • Info
  • Posts: 38
  • Registration: Apr 14 09
  • Reputation: 0
  • Own
  • | Message Posted on October 28, 2009 2:24 pm Nigel

    • Offline
    • Info
    • Posts: 38
    • Registration: Apr 14 09
    • Reputation: 0
  • Own
  • Thanks for the answer too) I’m waiting for more answers.
    About the original ink kit. I, unfortunately, cannot afford this now. The original kit costs an average of 600 hryvnia. (The original cartridges are all out of stock. You have to buy). The new T50 costs 1100 hryvnia.

    So I’m still waiting for answers / advice. And who can comment on the nozzle test, like it at all?

    | Message Posted on October 28th, 2009.13:09 Nigel

    • Offline
    • Info
    • Posts: 38
    • Registration: Apr 14 09
    • Reputation: 0
  • Own
  • Thanks for the answer. I will wait for answers from other gurus).
    In the meantime, I can add the following: it did not start right away as the SNPC put it after a certain period of time. Well, in fact, after reading the forum, we can say that ALL problems with the printer snpch begin again from the first day, and after a couple of weeks, which the printer is desperately fighting for life) So, inode this phenomenon manifested itself more strongly. Those. if I print, for example, 20 disks in a row, then by the 20th, dusting already becomes very noticeable in the Epson premium glossy paper mode, and if at the same time I put the boom like a CD, then it’s just horror (you can’t say otherwise). However, this was always treated with me by wiping the mouthguard almost dry and wiping the PG on a napkin between the PG and the mouthpiece several times. after this manipulation, dusting was reduced to approximately the same as in the scans above.
    Yes, and also, sometimes black and yellow disappear. They disappear (for me) in a rather strange way. Perhaps there is a connection between the two events. I’ll tell you how the colors disappear.
    1) It’s okay. nozzle test as above. (we consider this as a starting point)
    2) let’s say the carriage is stuck on the train.
    3) stop the printer. fixing the train. doing a nozzle test.
    4) there is little black and yellow, about 30% nozzles.
    5) do the standard cleaning. black and yellow are gone. not a single nozzle at all.
    6) we suck out everything we can from the mouth guard
    7) wipe the PG on a napkin.
    we make an “initial refueling” from the AdjustmentProgram
    9) Nozzles may appear immediately, perhaps after repeating point 6-8 again.
    10) test skid becomes 50-70%. Usually all yellow appears, not all black.
    11) leave the printer until the next day.
    12). test yuz 100% can be printed LONG. I did not print 500 sheets, but I did 10-20 A4 glossy photos. nozzles do not fall out.

    READ  How to connect a rz printer to wi-fi

    Just like that, even if I do not print for 2 weeks, the nozzles do not go anywhere. Always 100% until something like the above happens.
    And, always that in the mouthpiece, that when wiping the PG on a napkin. a lot of black ink. Ink ALL Intek 009. Bought in the same place.

    | Message Posted on October 26, 2009 23:29 bc

    • Offline
    • Info
    • Posts: 702
    • Registration Date: 21 Mar 08
    • Reputation: 8
  • Specialist
  • | Message Posted on October 26, 2009. 11:24 PM Nigel

    • Offline
    • Info
    • Posts: 38
    • Registration: Apr 14 09
    • Reputation: 0
  • Own
  • Kind time of the day. I ask the respected Gurus for an answer)
    R290 printer, CISS. Superprint, InkTech ink. Initially, everything was ok, then after the carriage got a couple of hooks on the ink train (it was laid correctly, according to the instructions, but the slack was already eliminated) the black color began to dust heavily. But NOT IN ALL PRINT MODES.
    If I’m just typing on A4, you can say it’s okay. If I print on A4 in SD mode, or just on SD samos. trouble. (Photos will be below). The black color is dusty at the border of the object. over, if you set the type of paper CD when printing, and print on CD (or A4), it will get dusty terribly., And if you set the paper type Epson Ultra Glossy and print on DISKS. not so dusty. I don’t know what to do, tell me.
    Photos, each about 1.3MB in size, sorry for the quality. This is Sony Eric K850 phone. no scanner

    Photos have been deleted. Does not correspond to the sizes specified in the Rules.

    Black is very dusty when printing Cd

    | Message Sent October 28, 2009 10:53 AM CAT

    • Offline
    • Info
    • Posts: 2,067
    • Registration Date: 05 Oct 07
    • Reputation: 188
    • Reputation 2019:
  • Pro
  • | Message Posted on May 11, 2013 15:26 zigzag_ua

    • Offline
    • Info
    • Posts: 904
    • Registration: 12 Sep 12
    • Reputation: 214
  • Specialist
  • | Message Posted on May 11, 2013 17:46 zigzag_ua

    • Offline
    • Info
    • Posts: 904
    • Registration: 12 Sep 12
    • Reputation: 214
  • Specialist
  • Attached Images

    | Message Posted on May 11, 2013 18:36 Aliona777

    • Offline
    • Info
    • Posts: 11
    • Registration Date: 11 May 13
    • Reputation: 0
  • Own
  • | Message Posted on May 11, 2013 12:14 pm Aliona777

    • Offline
    • Info
    • Posts: 11
    • Registration Date: 11 May 13
    • Reputation: 0
  • Own
  • good day
    Available printer EPSON Stylus SX430W.
    CISS on water-soluble ink.

    Problem. black color began to print in stripes (today), and when checking nozzles, all stripes are normal (including all black ones).
    When calibrating, all black squares are stripes (it is impossible to select something), colored are normal.
    There are no bubbles in the CISS system.
    I have already cleaned the nozzles 20 times (I will note again, when printing strips, everything is normal).

    PS Now I tried to print it again: I printed half of the sheet wonderfully (including black), and half of the sheet was black with stripes; colored normal.

    | Message Posted on May 11, 2013 14:51 Aliona777

    • Offline
    • Info
    • Posts: 11
    • Registration: 11 May 13
    • Reputation: 0
  • Own
  • Ink. Premium Ink InkTec and hike they are pigmented (I was mistaken in the top post).
    In the process of poking around in the printer, I discovered that there is an empty strip in the black ink plume (closer to the cartridges).
    I pumped ink out of the cartridge and from the plume with a needle (according to the advice on how to remove the airlock), but an empty cavity remained.

    Printing remains normal after priming the nozzles.

    The photo shows an empty spot in the black ink plume.
    How can I fill it?

    | Message Posted on May 11, 2013 15:24 Aliona777

    • Offline
    • Info
    • Posts: 11
    • Registration Date: 11 May 13
    • Reputation: 0
  • Own
  • Ink brand. hmm, Premium Ink InkTec Pigment for use with Epson. what other information is required from the ink can?

    Not a single hole was made, so during my experiments, not a single plume was damaged;)

    Total paint coverage

    Some people prefer to set the ink content as high as possible (C: 100; M: 100; Y: 100; K: 100), since in this case the result is close to RGB black on the monitor. This approach, however, can lead to certain printing problems, especially when ink is applied over a wide area. Since each ink must dry after application, the highest ink content values ​​will increase print time and cause unwanted defects.

    It is recommended to completely abandon setting maximum values ​​when preparing a project for printing. Most color profiles have a limit on the amount of ink to be applied (the total amount of all four colors). If the maximum value of the paint content is 400% (100% for each color), then in the color profiles there is a limitation of the total coverage (from 300% to 340%). For example, some color profiles convert 100% of all inks to 75% cyan 75% magenta 75% yellow 95% black for 320% total coverage.

    Color mixing

    In certain cases, when working with grayscale images, where only black is used, it becomes necessary to add a different color. Here it will be easiest to position such an image over a colored background, activate the Transparency tool and select the Uniform transparency option in the Multiply mode on the property bar. Areas of white will be removed. The result is a transparent black image that can then be used as an overlay for any background. In other words, a black overlay on top of a colored background will be printed.

    READ  Printer won't connect to Windows 10 laptop

    Black: Pantone and CMYK

    Not all projects are the same. When printing materials whose color gamut consists of, for example, only black and red, it is most practical to use two inks instead of four. Pantone colors are the most common colors for printing such designs. Various Pantone color palettes are divided by paper type (coated, offset, etc.), as well as by type of printing (silk-screen printing, printing on clothes, etc.).

    The vast majority of Pantone inks are opaque, while CMYK inks are translucent. In certain cases, the use of translucent paints can do a good job. To obtain a high-quality result when printing in one color using, say, only black, it is enough to use only Pantone black. Unfortunately, adding Pantone color to a CMYK print project will require all five inks, which will incur additional costs. In some situations, using additional paint is the only way to achieve the desired result. Examples of this are projects that require metallic colors (gold, silver, etc.) or fluorescent colors to print.

    In addition, translucent paints are used to create halftones. For gray printing, you can use a CMYK black tint, where the black will be 10% or 20%. The printed image will be composed of dots, which will create a gray effect. Where a solid color is required, you can use Pantone paint (such as PANTONE Cool Gray 1 C), which will result in a solid gray coat. The difference is obvious on printed materials, especially when viewed through a magnifying glass.

    Author: Ariel Garaza Díaz

    Black plays a major role in CMYK printing. CMYK is an abbreviation for printing ink colors. The first three letters are named after the first letter of the color: Cyan, Magenta, and Yellow, while the last letter of the Black abbreviation uses the last letter of the word. This is done, firstly, to avoid confusion with blue (Blue), and secondly, for the reason that black is also called the Key color, since it is black that is most important in CMYK printing. Most printers print black first (K-C-M-Y). Many experts say that if the quality of the black color is satisfactory when printing, then the printing of all the material will be of high quality, but if there are problems with the black color, then it will be almost impossible to correct the situation.

    In addition, black is the most difficult color to print, which is why working with it is so important.

    As you probably know, your computer monitor and web pages use a different color mode. RGB. This abbreviation is based on the first letters of the colors in the visible spectrum: Red, Green, and Blue. In this color model, black has the meaning “dark” or “no light” because it is represented by zero for all three colors: R: 0; G: 0; B: 0. It goes without saying that blacks are displayed as the darkest on the monitor.

    However, CMYK black represents a completely different concept: colors are created by mixing inks. This color model is subtractive. A subtractive color shaping scheme involves overlaying colors, in which the final color becomes darker and tends to black. Due to the fact that it is almost impossible to generate pure black using only cyan, magenta and yellow, in CMYK, black is added to the other three colors. RGB, by contrast, is an additive color model where colors are added and the final color tends to white.

    For example, to create CMYK red, you must use a mixture of yellow and magenta. Adding black paint will make the red darker.

    However, there is one problem: CMYK printing uses transparent inks, which causes them to overlap when printed. This means that 100% black in CMYK does not cover the area with an opaque black layer. The same is achieved by creating a gradient from any color to black: black looks gray and “diluted”. There are other similar situations where you need to position a grayscale image on top of the background. Next, we will discuss possible solutions to these problems.

    Black in CMYK printing

    Pure black and deep black

    If you fill a background or other large area with CMYK black, you will notice that the black is not as dark as expected. CMYK uses values ​​from 0% to 100% (and it is simply impossible to increase the value for each color above this mark), but as a result, black will still look more like dark gray. The most common solution to this problem is to add a different color (for example, 40% cyan: C: 40; M: 0; Y: 0; K: 100). Changing cyan to magenta produces warm blacks. The optimal solution is to add 40% each cyan, magenta and yellow (C: 40; M: 40; Y: 40; K: 100). This method results in a nice neutral black. Such a color is called deep black, that is, a mixture of black with other colors, while only black is used to obtain pure black (C: 0; M: 0; Y: 0; K: 100).

    Working with gradients

    Applying a pure black fountain fill to a different color may result in a nasty “faded” color that looks more like a light gray.

    In this case, instead of pure black, you should use a rich black. You will notice a huge difference (both on the monitor and in the printed output). For example, to obtain a gradient from 100% black to 100% cyan, the best result will be obtained using the formula “100% black 100% cyan to 100% cyan”.

    Overlay black

    We often hear the term Black Overprint, but not everyone has an idea of ​​what it is and why it is so important in prepress. Imagine that you are going to print black text on a green background. If you do not use black overlay, the result will be white unprinted areas of the background at the dividing points, since no printing press can match the constituent colors with absolute accuracy. Misalignment occurs for a variety of reasons, including paper stretching and slight differences in print speed. As a result, the print may appear as if a thin white border has appeared along the edge of the letters. This is enough to not only spoil the appearance of the printed matter, but also make the text unreadable. You can avoid this situation by applying a black overlay for printing. This is especially important when printing thin lines and small text. Since in this case the black is mixed with the background color, the contrast of the text is increased and it becomes more readable.

    So, the overlay technique is extremely important when printing thin lines and small print. However, problems can arise when using overlay in projects where large objects are printed on top of a non-uniform background. Remember, CMYK ink does not have overlapping properties, so a background of different colors will show through the black overlay as a result. The same principle applies when overlaying other colors over fills or objects with contrasting outlines. Don’t forget to activate the Simulate Overlay option in the View menu.

    NNCXV.INFO 2021