Call Waiting on iPhone won’t turn on

Table of Contents

Charging the battery correctly

Also, in the case of work at a low air temperature, the battery is quickly discharged and the phone is turned off. The resuscitation procedure is the same as described above. With one exception. the device must be allowed to warm up to room temperature and only then put on recharge. If you charge a cold gadget, then condensation forms inside it from the temperature drop, the closure of internal parts and the iPhone 5s will no longer work.

If the owner does not restart his iPhone for a long time, then he simply goes into save mode. In this case, we proceed as follows. simultaneously press and hold the following buttons. “ON” and “HOME”, and hold this for about 15-20 seconds. Usually after this, the iPhone 6s turns on.

Bringing the device back to life

call, waiting, iphone, turn

Let’s go over for “easy” reasons first. So, if the indicator shows 0, then we put the smartphone on charge. But know that to turn it on, you need at least an hour of charging. First, let’s try a simple algorithm for charging the built-in battery, if that doesn’t help, let’s move on to more complex methods of resuscitation.

Hard reboot

If immediately after the update, to the latest version of iOS, the iPhone does not turn on and writes to connect to iTunes, we try to do a so-called hard reboot. In 60% of cases, this helps to solve the problem with the inability to load the operating system. In order to make a forced reboot, hold down the “HOME” and “ON” keys for a few seconds. We are waiting for about 3-5 seconds, the device will start loading the system, which will notify the logo of the Cupertin company that appears on the screen.

Usually, this method brings the iPhone back to life without any special problems, but if this did not happen, we try radical methods.

Recovery using Apple branded software

If the software fails, then you need a USB cable and a computer with Aityuns installed in it. We do the following:

  • We connect the gadget to the computer and open iTunes;
  • We forcibly restart the smartphone by pressing the power and home buttons. After 10 sec. release the first button, but continue to hold the “home” button. And hold until recovery mode appears on the smartphone screen;
  • A window should appear in iTunes with a suggestion to restore or update. Choosing the latter.

If the update of the sixth model has passed, but after the update the iPhone does not turn on, then again we resort to a forced reboot. We already know how to do this. The picture and video will help to avoid elementary mistakes and correctly restore the device’s performance. At the bottom of the article, by tradition, I will leave a video instruction with a detailed description of the process of returning “dialers from the world of bricks”.

Reasons why iPhone won’t turn on after update

As experts explain, this often happens due to the fact that Apple products are too “correct” in nature. This means that after installing a new operating system, it immediately starts checking the details of the gadget for originality. And as soon as it discovers a part not from the list, it immediately turns off the phone, “motivating” it by the fact that it is not working properly. And the higher the iOS version, the more demanding the system.

But besides this, there are other reasons, for example, on versions 5 and higher, the finger scanner has its own identification number linked to the unique identifiers of the processor, and when it is replaced, without flashing, the phone also does not work. This greatly complicates the work of unofficial mobile repair technicians, for which an ordinary user has to pay.

An iOS error leading to the “scouring” of the device is not always related to the update, it just often coincides with the fact that another part is damaged, which is working normally before the update procedure.

In addition, there are more prosaic reasons why Apple products do not turn on after the update:

  • Battery discharge;
  • Hypothermia of the smartphone;
  • The device is in the “save” mode;

iPhone refuses to turn on after iOS update, how to fix?

A considerable number of fans of apple products, or rather iPhone users, faced such a problem. after updating the iPhone 5, 5s, 6, 7 does not turn on. over, the malfunction can affect even a brand new, just bought smartphone, not only 5 models, but also 4, 6,7 or even 8. The device either does not turn on, or freezes at the reboot stage, or the screen remains black. What to do in this case, how to eliminate an annoying malfunction?

Indeed, as the experience of many shows, in most cases this problem can be solved only in the service. But sometimes self-directed actions can help reanimate the phone.

And if all of the above methods did not help and the smartphone still does not turn on. This can only mean one thing. the internal parts of the iPhone are out of order. Well, if the device is under warranty, the repair will be done for you free of charge. The only thing you need is not to open the phone cover under warranty, otherwise the repair will be carried out at your expense, and it can sometimes be more expensive than the device itself. To find out exactly, contact your nearest service center, where they will tell you what to do next.

From this article, you learned what to do if the iPhone of any model does not turn on, from 4 to the new 8 model.

The second line on the iPhone. What you need to know?

All modern smartphones support call-hold functionality, and iPhones are no exception. The option allows you to find out about the arrival of an incoming call during a conversation with a subscriber, allowing you to switch to another interlocutor if necessary. Let’s take a closer look at what this opportunity is.

Please note that Call Waiting is supported by all operators operating in the Russian Federation. The service is provided free of charge, but you should be aware that billing is carried out according to the terms of your plan. over, each of the calls is paid separately.

So how do you know about a second mowing line??

After the phone receives a call while talking, you will hear a characteristic sound signal, and the iPhone screen will display the caller’s number and three possible options:

Thus, the “Call Waiting” option will allow you to always stay in touch and not miss an important call while talking with other subscribers.

It’s easy to do. You need to go to “Settings”. “Telephone”. Call waiting. We translate the slider to the active position.

If the function is disabled, then all incoming calls will be transferred to voicemail. In some countries and with certain operators, this service may be provided for a fee. Therefore, if it is not possible to activate the option through the settings, you need to make sure that it is available by contacting your service provider.

Longreads for you

Telegram now has a function to automatically delete messages in regular chats. We figure out how to turn it on and what to do if you want a little more

Everyone is just talking about the Clubhouse application and begging for invites there. But in fact, this social network is not as good as it seems at first glance. We analyze where the clubhouse came from at all, and whether it is worth using it at all.

WatchOS 7 introduces a new Study Time feature that lets you restrict the use of your Apple Watch in class. On the clock, she is depicted as a person at a desk ♂ However, not everyone can turn her on.

Megafon now has 5 rubles for the fact of holding on the mowing line. The first 10 per month are paid, from 11. free.

How to enable second line on iPhone

The inclusion or activation of the second parallel cutter line for calls on the iPhone depends on the gadget model. If it belongs to a new generation and has a second SIM card at its disposal, the user will have to additionally configure the payment method for communication.

However, the sequence does not initially differ depending on the model:

  • Open device settings.
  • Go to a subsection called Phone. It is located in the last, lowest block.
  • In the penultimate line of the menu that opens, you will see the Call waiting line, which you need to click on.
  • The only item will appear on the screen, in which you need to move the slider to the right so that it turns green. You can do it with one touch.

If there is more than one SIM card, then the entire sequence is saved, however, at the penultimate step, the device will ask you to specify for which particular tariff the access to the second mowing line is activated. This is necessary because some operators charge a fee to activate the feature. Other than that, don’t expect both calls to cost as usual. As a rule, each call is charged separately.

Important! Neither the manufacturer nor the device itself will report the cost of the function, since only the operator providing communication has access to this data.

READ  Transferring Information from Android to iPhone

Self-call on the second mowing line

If the subscriber is busy talking with one person, this should not mean that he does not need to call another. In situations where the conversation requires a short break for consultation, for the sake of convenience, you can make a parallel call yourself. To do this, in the quick access panel that is open during a conversation, you need to press the lower left button, under which there is an inscription “Add”. After that, a call to the second subscriber will become available, while the first will be on hold at this time.

How to turn on the second line on iPhone. detailed instructions

Each function on the gadget is intended to expand the user’s experience in a narrow area, but this may turn out to be an unnecessary addition that you want to disable. For this reason, you should pay close attention to the settings of smartphones. Not all people using Apple products know how to enable second line on iPhone. However, it can be useful for advanced call management.

Managing both calls

When a third subscriber connects, when one of the interlocutors is on hold, another access panel to call control opens in front of the user, which helps to work with both calls.

There are three options in total:

  • The first is to press the red center call cut-off key. This will reset the conversation with the current caller, automatically switching to another caller.
  • The second option is designated as switching. The button for this action is located in the bottom row of the panel in the center. The action will switch places, that is, the current one will go into standby mode, and the person with whom the conversation was on hold will be heard again.
  • The third step allows you to combine both calls. This creates a conference with two interlocutors.

Important! It is worth noting that the cost of a conference with two subscribers will be more expensive, but only the operator can specify the exact price.

What is Second Line, Call Waiting and Call Hold on iPhone

First, you need to understand the terminology. Call waiting on iPhone. what is this function and how the subscriber should understand that it is currently active?

There are situations when a person talks on the phone for a long time. At this time, others cannot get through to him, and the sociable subscriber does not know about their desire to receive attention from him. To prevent such unconscious ignoring from happening, the functions of the second mowing line, holding and waiting for a call, are needed.

When activating the second parallel cutter line function during a call with one person, the user receives an audible signal if he receives a call from another person. In this case, 3 answer options are displayed on the screen:

  • The first allows you to interrupt the current conversation to answer a new incoming call. This option is located at the bottom left of the display.
  • The second involves continuing the conversation with the first interlocutor. An answering machine symbol is displayed in the center in such situations. This means that when you click on it, the conversation continues, and the new interlocutor is redirected to the voice message recording service.
  • The third option, for which you need to click on the icon to the right of the center, helps the subscriber to pause the current call, while answering the new caller.

When a call comes in, it is also possible to ignore it, which will lead to the continued conversation, and the new caller hangs up. In this case, only the notification will interfere, which is repeated if the second call is not interrupted.

Note! When a new call arrives during an ongoing call, the subscriber receives a signal that the other party cannot hear.

Not everyone knows, but there is call waiting on the iPhone, which means it’s worth working out. For a subscriber who is already talking, the function provides the ability to join the second conversation without losing contact with the first user.

Holding a call helps to set up communication with two subscribers at once, alternately switching between dialogs with them. To do this, during the first conversation, you need to select hold the call to answer the second interlocutor. After that, it will be possible to swap partners on the screen.

How to set up a second line on iPhone

The setting can show why using the second line cutter feature is beneficial to all subscribers. Various applications are possible to make the conversation more comfortable for all participants.

How to disable Call Waiting on iPhone to stop interrupting a call

The call waiting function is convenient. But if you are annoyed by the beep it emits, you can turn it off. After that, you will not hear a disturbing sound during a call. Let me show you how. But first, here’s some more information on what call waiting is.

What is call waiting on iPhone

Call waiting is an agent-specific feature that notifies you of an incoming call with frequent beeps when you are already on another call.

Note. If you have a dual SIM iPhone (iPhone XS, XR and later), call waiting will only work when you receive a second call on the same SIM. Also, it will work if Wi-Fi calling is enabled for the other line and a data connection is available.

Call waiting can be an advantage when you cannot afford to miss an important call. When you hear a beep, you just need to look at the screen to see who is trying to reach you.

However, sometimes people might keep dialing when you are already on another call, which can be annoying. So this is how to turn it off.

How to turn off call waiting on iPhone

Please wait a few seconds. Turn off the toggle switch.

How to fix Call Waiting not working on iphone X,XS.XR in ios 14

When you turn off call waiting, phone calls are automatically routed to your voicemail (if available). Technically, you don’t miss a single call unless the caller decides to disconnect before sending you voicemail.

Turning off call waiting can fill up your voicemail pretty quickly. In addition, since you will not receive any notifications during a call, you may have to remember to check your voicemail to answer calls.

Here’s how you can turn off call waiting on your iPhone. Most carriers support this. However, in rare cases, if you do not see the Call Waiting option in your device settings, contact your carrier to find out. Finally, you can take a look at some of the best call recorder apps for iPhone.

Controlling call hold and turning it off in iPhone settings

Almost all modern cellular operators support the “call waiting” function, this function allows you to receive a call on a second mowing line, even if you are talking to someone at the moment. If you pick up the handset for the second call, the first subscriber is put on hold and waits for you to end the call. While on hold, the first subscriber does not hear your conversation with the second subscriber until you end the conversation or switch to it.

For operators MTS, Megafon and Beeline, this function is free. But since the first subscriber is still on the mowing line, the fee is charged for both calls according to your tariff plan, this is how MTS describes it:

“There is no monthly fee for Call Waiting and Call Hold or its activation fee. Tariffication is carried out for 2 calls at the same time in accordance with the terms of your tariff plan, depending on the direction of your call, since during a call you hold two channels. That is, both calls. active and held. are charged in accordance with your chosen tariff plan “.

During a conversation with the first subscriber and an incoming call from the second one, you hear a characteristic sound signal (2 beeps). These two beeps are repeated at regular intervals, notifying you that someone is trying to connect on the second line. By looking at the iPhone screen, you will see who is calling and you can disconnect the first caller and pick up the phone from the second. Transfer the second to the answering machine or hold the first subscriber and understand the receiver to the second.

During a conversation with the second subscriber, the number of the first subscriber to the left of the On Hold text will be indicated at the top of the screen. At this point, you can switch between them with the Replace button.

At the end of the conversation with one of the subscribers, you will be switched to the second. If you do not want to use the call waiting function, for example, for reasons of economy, or if you are disturbed by beeps during a call, you can disable this function in the settings. To do this, go to Settings → Phone → Call waiting, wait until the animation spinner disappears and turn off this function.

How to disable Call Waiting on iPhone to stop interrupting a call

Call waiting notifies you of an incoming call when you are on another call. You know this from the frequent beeps you hear when you are on another call.

Call waiting can be an advantage when you cannot afford to miss an important call. When you hear a beep, you just need to look at the screen to see who is calling. But sometimes it can be annoying. You can of course turn off this signal.

How to disable Call Waiting on iPhone to stop interrupting a call

To avoid interruptions and annoying beeps, you can turn off the call waiting feature on your iPhone by following these steps:

Step Go to Settings app on iPhone.

Step Click on the phone.

Step Now select the “Call Waiting” function and wait for the bootloader to show the switch.

Step Slide the Call Waiting Switch to OFF.

So this turns off call waiting, which means there are no more beeps. But where do they call? What the caller hears?

It turns out that when you turn off call waiting, calls are automatically routed to your voicemail. Technically, you won’t miss a single call, unless the caller decides to drop the call before sending you voicemail.

Turning off Call Waiting can fill up your voicemail pretty quickly. In addition, since you will not receive any notifications during a call, you may have to remember to check your voicemail to answer calls.

No Call Waiting option on my iPhone?

Call waiting. this is an operator specific feature, but since most operators support it, it is unlikely that you will run into this problem.

However, some users definitely report that they don’t see the call waiting feature on their iPhones. Strange, but in this case you will have to contact your carrier to find out if call waiting is supported and then follow the steps.

Want to catch up with more articles like this? Be sure to download our app and stay tuned through. and Google Plus to never miss our latest news.

How to connect modem mode

If the mobile Internet on your smartphone does not work in modem mode or the device does not allow you to connect to the network in access point mode, make sure that the corresponding function is turned on. It’s easy to do:

  • go to the settings menu
  • select “Modem mode” or “Cellular data”. “Modem mode”
  • move the slider to the on position
  • check the settings and the password that your mobile phone will generate
READ  How to maintain iPhone battery capacity

If everything is in order, you should restart your phone. Typically, the modem mode function is then restored. It is recommended to perform the same actions if it is not possible to create access. Another way is to reset the settings to factory defaults and then enter all the parameters manually.

There is network coverage, but the internet is not working

LTE connection errors most often come from the mobile operator. Typically, this problem occurs after a hard reset or factory reset. Even with good network coverage, unlimited internet may not function. Distinguishing this problem from others is easy. the cellular antenna is displayed in the status bar, but the icon disappears. The following actions will help to correct the situation:

  • go to iPhone settings
  • select the tab “Cellular”
  • find the menu “Data Transfer”
  • type APN and username, after specifying them with your mobile operator

However, before checking the settings, make sure that you have paid for the Internet, have network coverage, and the operator provides this service. Check the details of the tariffs for mobile communications. If your Internet often does not work correctly, discuss technical assistance with your cellular operator. Some users, in order to eliminate the problems that arise, change the mobile operator to a more suitable one.

Data network problems

You may not be connected to the internet if your cellular data network is off. Look in the parameters of your mobile phone. if it is disabled, the icon disappears in the status bar. To connect the network, follow these steps:

  • go to the connection settings menu
  • make sure that in the items “Cellular data” and “Enable 3G” the slider is in the activated state
  • turn on the transmission of cellular data if necessary

Even if the cellular connection was working properly, the coverage of the cellular network may be different, which is why the smartphone does not receive a signal everywhere. Operators cannot provide the same good cellular reception in different parts of the city. If the 3G icon changes to E or H, this is not considered a malfunction.

If the 3G icon is missing

When the 3G icon is displayed in the status bar, but the browser does not load the pages, you should rule out the browser issue. The easiest way is to download all the proposed updates to the application, or uninstall and reinstall it. If you are using a standard browser, try the following steps:

  • disable javascript in browser
  • restart phone (Power Home)
  • close the browser by double-clicking on the Home key and swiping up the application tab

Many iPhone owners have experienced poor page loading and following links after updating the operating system to version 9.3. Updating the iOS system to the latest version will help solve the problem.

The methods described above are relevant only if the problem is caused by a browser error, and there are no problems with LTE mobile communication on the part of the cellular operator. If the network or cellular data icon still disappears, you should look for other reasons.

How to identify the problem

Problems with unlimited mobile internet can be easily distinguished from any others. The main symptoms of a problem are:

  • you cannot go online on your iPhone (via 3G, LTE or Wi-Fi)
  • tethering won’t turn on (or iPhone doesn’t work as a Wi-Fi hotspot)
  • Internet works intermittently or pages are not displayed on the mobile phone screen if there is a connection icon

If you encounter a system error, just restart your smartphone. after turning on, the unlimited Internet function should work as usual. It also sometimes helps to switch to Airplane mode and then return to normal mode. If simple actions did not help, the error should be looked for in the phone settings, software or hardware.

Why LTE stopped turning on

The reasons why the Internet does not work on the iPhone are different. The most common problems faced by iPhone users are:

  • error in wireless network settings or 3G connection
  • iOS system error
  • iPhone hardware breakdown
  • incorrect operation of the SIM card

In most cases (especially when it comes to software problems), you can fix the situation yourself.

Internet does not work on iPhone

And get the best deals from trusted masters.

  • Compare and choose the best conditions
  • Feedback from interested professionals only
  • Don’t waste time communicating with intermediaries

Apple produces high-end smartphones, but this does not exclude the problem that gadget users sometimes face. the Internet does not work on the iPhone. The problem arises with different mobile operators. Most often, incorrect settings are to blame, but there are also more serious reasons. Follow these simple instructions to understand why the internet sometimes doesn’t work well on smartphones and how you can fix iPhone malfunctions on your own.

Fix Could not save call waiting setting. Activate call waiting service in iphone ios 14

What to do if your smartphone stops receiving cellular communications

If you restart your phone and even reset it to factory settings, and the problems still persist (the 3G icon is missing in the status bar, there is no Internet access), the problem may lie in the hardware of the smartphone. Repairing the wireless module or other elements on your own can damage the manufacturer’s seals, therefore, with iPhones under warranty, it is better to immediately contact the service center.

If you do not want to wait long, then check the settings and repair the gadget in which there are problems with network coverage or there is no access to unlimited Internet, performers registered in Yuda who perform iPhone repairs will help. They work with smartphones at a high professional level:

  • have been restoring Apple phones for many years, therefore, they perform tasks professionally
  • quickly diagnose any problems with the mobile Internet
  • have experience in connecting all mobile network operators

No sound (disappeared) on incoming call on iPhone, what to do?

If the sound of an incoming call or messages has stopped playing on the iPhone, this does not mean that it is time to run to the service center. There is a chance that you have stumbled upon a rare, but not a single bug. A banal reboot or turning on / off the silent mode switch may not help, which is why try using our instructions.

Check your sound settings

It is possible that problems with the ringtone arose due to incorrect sound settings. Open “Settings”, select the section “Sounds, tactile signals” and set the appropriate ringtone and notification volume. Here you can also enable “Change with buttons”, which will allow you to adjust the volume of the ringtone using the volume button on the left side of the iPhone.

No sound on incoming call on iPhone. Do Not Disturb is activated

If the ringtone on your iPhone stops ringing, check to see if Do Not Disturb is turned on. Users often mistakenly activate this mode without noticing it. If you see a crescent-shaped icon at the top of the screen, it means that you have Do Not Disturb mode turned on, which turns off all sound notifications.

Solving this problem is as easy as shelling pears. Open Control Center and turn off Do Not Disturb mode. The beep should now appear again.

You can change the Do Not Disturb settings by going to Settings → Do Not Disturb.

iPhone needs restart

If the volume switch is in the correct position and the ringtone still does not sound, your device may need to be rebooted. A hard restart will fix software bugs that could have caused the ringtone to disappear. We talked about how to restart iPhone (4 ways) in this article.

No sound on incoming call on iPhone. headphone mode is turned on by mistake

If you have tried all of the above methods, but none of them helped, then the problem is somewhat more complicated. For example, your iPhone may have remained in headset mode by mistake. This can be easily checked in the Music application or Control Center by clicking on the “Devices” icon.

Try plugging and unplugging headphones several times, gently cleaning the audio / Lightning connector with a toothpick, restarting your iPhone.

Setting Call Forwarding or Call Waiting (GSM)

Select “Settings” “Phone”.

Select one of the following sections.

Call forwarding. When call forwarding is enabled, the icon is displayed in the status menu. When you turn on call forwarding on iPhone, you must be within range of a cellular network, otherwise calls will not be forwarded.

Call waiting. If you are on a call and call waiting is disabled, incoming calls are forwarded to the answering machine.

On dual SIM models, call waiting only works for incoming calls to the same number, unless Wi-Fi Calling is enabled for the other number and cellular data is available. See Set up cellular on iPhone.

Contact your network operator for information on enabling and using these features on CDMA networks.

Contact your carrier for more information on setting up Conditional Call Forwarding during another incoming call or when your device is offline (if provided by your carrier).

IPhone Call Waiting

Many smartphones have the function of switching the call to the second line. With its help, you can put the conversation with the interlocutor “on hold” and at the same time answer another incoming call. Let’s see how to enable second line on iPhone.

Call Waiting

Before turning on the 2 line on the iPhone, you need to study the “Call Waiting” function, it helps to see a new incoming call during a call.

When calling on the second line, the actions can be as follows:

Put the conversation on hold and start a dialogue with the second interlocutor

Cancel a call or switch it to an answering machine, which is the same as dropping a call on an iPhone

End the conversation with the first interlocutor and answer the second call

Muting a call

Press the side button or Sleep / Wake button (depending on iPhone model) or any of the volume buttons.

After mute the ringtone, you can still answer the call until it is routed to the answering machine.

How to disable the second line

Information on how to disable the second line on iPhone will also be helpful. All parallel calls will be transferred to voicemail or a busy signal will be set.

To disable “Call waiting” in the settings, you need to reset the slider to the off position or contact the operator and he will do it on his own, disabling the withdrawal of money.

If after setting the settings, no changes occurred, you need to restart the smartphone.

The function can be turned on and off several times as needed.

New iPhone users sometimes encounter a situation when, while talking on the phone, they are called on the second mowing line, but they do not see or hear it.

As a result, some even mistakenly begin to believe that the iPhone does not have a “call waiting” function, but this is not so, it just needs to be activated, if for some reason it is not enabled by default.

READ  How to back up on iPhone 8

To learn how to turn on the second line on the iPhone, read this instruction.

For those who are not familiar with this feature of their phone, we will briefly talk about it. The call waiting function is really very convenient. you will not miss a call even if you are currently talking with another subscriber.

On the iPhone, as in most other phones, when during a conversation with the other person you receive a call on the second mowing line, you can choose one of three options:

  • drop the incoming call and continue the conversation with the previous subscriber;
  • answer an incoming call and put the previous conversation on hold (to return to it later);
  • answer an incoming call and drop the current conversation, if you have already agreed with the previous subscriber.

Connecting a second line or the so-called “call waiting” on your phone is quite simple, for this you just need to put one slider in the settings in the “On” position.

Rejecting a call and sending a call to the answering machine

Do one of the following:

If iPhone is unlocked, tap Decline.

If iPhone is locked, quickly press the Side button or the Sleep / Wake button (depending on the iPhone model) twice in a row.

On EarPods, press and hold the Center button until you hear two quiet beeps.

To set a reminder to call back, tap Remind and choose when you want to be reminded.

To answer the call with a text message, tap Message, then select a reply or tap Compose.

To create your own standard replies, go to Settings Phone Reply with a message, tap any of the standard messages and change its text.

Note. In some regions, rejecting a call disconnects the call without sending it to voicemail.

Enabling a second line cutter on iPhone

It’s all. Now the second line of your iPhone is activated and you will not miss a single important call, even if you are busy talking with another interlocutor.

To all of the above, it should be added that for some operators the call waiting function may be disabled on their side or even be a paid service. In this case, the slider for enabling call waiting will be inactive, and to activate the service, you need to contact your mobile operator.

If you see the message “Failed to save Call Waiting setting”, try restarting your phone. If this does not help, check the availability of the service with the operator. If the operator says that the service is available to you, reset your phone settings. in this case, the option appears in 100% of cases.

In the Phone app, you can answer an incoming call, mute the call, or reject an incoming call. You can also reply with a text message or set a reminder to call back.

iPhone protects you from unknown and unwanted callers by automatically directing them to your answering machine. Only calls from numbers that are saved in the Contacts, Mail and Messages applications are transferred directly to the phone.

How to turn on the second line on the iPhone

To make the listed features available, you must enable the second line in the settings. The procedure is performed in several stages:

  • Enter Settings.
  • Find the item “Phone”.
  • When you navigate, a list of items opens, from which you should select “Call Waiting”.
  • Set the slider to the active position. move it to the right.

This feature is already active on some devices. To check this, you can ask a friend to call during a conversation.

Some operators make the service paid, and if switching the slider did not help, you need to call the hot line and clarify the information.

Turn the Contacts option on or off for an account

To solve this error, you can reset and re-enable the contacts option for each of the accounts available on your device. To perform this operation, follow our instructions.

On your phone, open the Settings app.

Go to the “Passwords and Accounts” section. Select the accounts you have on your iPhone, one at a time, including Gmail, Outlook, iCloud, and more.

After opening each of the accounts, turn off the “Contacts” option, and after a few seconds, turn it back on.

Turn off or turn on Contacts in iCloud

If restarting your device does not work, you can check if the contacts option is enabled in iCloud. Perhaps the reason for the failure is that this option is inactive. To enable or disable it, follow the instructions below.

Open the Settings app on your iPhone.

Next go to Apple ID settings and select iCloud.

If the slider opposite the “Contacts” item is in the inactive position, activate it. If the setting is enabled, move the slider to the left to disable it, and then, after waiting for a few seconds, return to the active position.

Restarting the iPhone

In case of any failure of the phone, this method will be the first to be used. In many cases, a simple operation such as restarting the device instantly resolves existing problems. To restart your iPhone, follow these steps.

Press the power button on your phone and hold it until the slider appears on the screen.

Move the slider to the right to turn off the device.

Press and hold the power button again until the Apple logo appears on the screen.

After turning on the phone, check if the problem has been resolved. If contacts are still not displayed during an incoming call, you can try to force restart your phone. The steps required to hard reset your iPhone will vary slightly depending on the model of your device.

Reset network settings.

After updating the OS of the device, some settings are changed, and therefore, when connected to the network, some functions may not work correctly. Try resetting the settings of the network you’re connected to, and then check to see if contact names are displayed on an incoming call on iPhone. To do this, follow a few simple steps.

Open the “Settings” application on your iPhone and go to the “General” section.

Select “Reset” and then “Reset network settings”. To confirm the reset, you will need to enter the password from the device.

Factory reset

This method will entail the loss of all files on your device, so use it if you do not have any important data saved on your iPhone or if you have a backup copy of your phone that can be restored later. So, to reset all phone settings to factory defaults and thus get rid of system crashes, follow the guide below.

Open the “Settings” app and go to the “General” section.

Select the “Reset” menu and then the “Erase content and settings” option. Confirm your decision by clicking on the “Erase” option in the request that appears.

Set up your phone as new or restore from a pre-made backup.

Fixing the operating system with Tenorshare ReiBoot

If the above options could not solve the problem of missing contact information during an incoming call on the iPhone, the error may be in the software. In this situation, it would be preferable to turn to specialized programs developed directly for recovering the iOS system. The best program of this type, Tenorshare ReiBoot, allows you to eliminate any type of iOS errors quickly and without losing the data stored on your phone. To use this utility to fix the operating system of your iPhone, follow the instructions below.

Step 1 Download the ReiBoot installation file from the developer’s official website and install it on your PC / Mac. After the installation is complete, open the utility on your computer. Then connect your iPhone with a USB cable to your computer. In the program menu, select the “iOS System Repair” option, and click on the “Start” button.

Step 2 In the new window of the program, click on the “Standard repair” button. By default, the program is set to fast scan mode. At this stage, you can change it to Deep Repair. Please note that with deep scanning, the safety of the device data is not guaranteed! It is recommended that you back up all important data on your device before starting work.

Step 3 Next, the program will offer you to download the firmware of the latest version of the operating system to your PC. Select the “Download” option. To change the path to save the file on your computer, click the “Browse” button. In addition, if you already have files for installing the latest version of iOS, download them from your PC by clicking on the “Select” button at the bottom of the screen.

Step 4 When all files have finished downloading, click on the “Fix it now” button. Wait for the process to complete. Please note that during this process, you should not disconnect the device from the PC in order to avoid the program malfunction. To finish working with the program, click on “Finish”. Your iPhone will restart normally with a working version of iOS.

A professional tool for fixing any iOS system errors has many beneficial features and has already won the approval of many users. The guarantee of success, data safety and speed of obtaining results are the main features of the program. We invite you to learn more about the functionality of this utility.

  • The program supports all iOS devices: iPhone, iPad, iPod, including recently released models.
  • The utility can be used to eliminate a large number of various crashes and errors of the iOS system: more than 50 types of various system errors in total.
  • A unique feature of the utility is the ability to fix the device system without losing the data stored on it. an indispensable feature in a situation where it is impossible to make a backup.
  • In addition to updating the system, the program allows you to perform the reverse operation. downgrade system, just as quickly and efficiently.
  • The program can also help in case of problems with tvOS.
  • The program can fix iTunes errors that occurred when restoring or backing up iPhone, and then you can use any of these programs to complete the process.
  • User-friendly interface, ease of use, tips accompanying the user in the process make the use of the utility pleasant and comfortable.
  • The availability of the program installation in Russian expands the circle of potential users.

Restore iPhone with iTunes

After restoring the device using the program that any user of Apple products has, the iPhone data will be erased, as in the previous method. Therefore, we strongly recommend that you save all important data to the cloud storage or backup. In addition, before starting work, make sure that the latest version of iTunes is installed on your PC, update the application if necessary.

Launch iTunes on your computer and connect iPhone to PC using USB cable.

After the program detects the device, click on its icon and go to the “Overview” tab.

On the right side of the screen, select the “Restore iPhone” option. In the request that appears, confirm your decision.

Set up your phone as new or restore from a pre-made backup.