Connecting iPhone to Computer via USB

How to connect an iPhone to a computer via USB and Wi-Fi Creating a Wi-Fi network to connect an iPhone in Windows and Mac OS X

connecting, iphone, computer

Yes, connecting an iPhone or iPad to a personal computer based on Windows or Mac OS X is elementary, and with the release of iOS 5 and iTunes 10.5, this can be done not only with a standard USB cable. If you know all the ways to connect “iPhone. computer” and you have no problems with this, pass by, the rest. welcome “under the cut”.

Perhaps, having read the title, experienced iOS-users will bombard me with “rotten” comments and have the right to do so, because connecting an iPhone to a computer is elementary simple.

As part of today’s publication, we will look at ways to connect iOS devices (iPhone and iPad) to a personal computer based on Windows and Mac OS X, get acquainted with the advantages and disadvantages of each method and try to find the best.

Connecting iPhone to Computer via Wi-Fi

With the release in October 2011 of iOS 5th version and iTunes 10.5, the owners of Apple mobile devices became able to connect the device to a computer via Wi-Fi. Synchronizing the device has become much more convenient, during the synchronization process with the iPhone, you can work as usual, it is not busy (as it was before), only the corresponding icon is displayed in the status bar. It was a big step forward and a bold “” for Apple.

IPhone wireless connectivity allows you to:

  • sync it with iTunes;
  • create backups;
  • upload content (music, videos, TV shows, ringtones, photos) to the device memory via iTunes;
  • install and uninstall games and programs from the App Store.

Ways to Connect iPhone to Computer

Initially, it was possible to connect an iOS device to a computer only with the USB cable supplied with the device, but with the advent of iOS 5 and iTunes 10.5, a second, more universal one appeared. via a wireless Wi-Fi network.

Today (iOS 7.1.2 and iTunes 11.3 are relevant), you can connect your iPhone or iPad to your computer in 2 ways:

  • USB cable;
  • wireless Wi-Fi.

With the first method, no problems arise, just connect one end of the cable with a USB connector to the corresponding port of the computer (these can be USB 2.0 and USB 3.0 ports), and insert the other into the connector of the iPhone or iPad.

Connecting iPhone wirelessly requires more. If you have a wireless router and there are no difficulties here: turn on Wi-Fi in the settings of the iOS device (the corresponding switch in “Settings. Wi-Fi”), select the network created by the Wi-Fi router and wait for the connection.

What to do for those who have only a computer with a Wi-Fi module, a laptop for example, and an iOS device? It is necessary to create a separate wireless computer-to-computer network, but first things first.

Benefits of connecting iPhone to computer via USB:

  • high data transfer rate;
  • everything is elementary simple;
  • you can download (upload) music, videos, ringtones and photos to the iPhone without synchronization using file managers like iFunBox and iTools;
  • you can install and uninstall applications (games and software) through file managers (the same iFunBox and iTools) without syncing iPhone to iTunes;
  • allows you to charge your device.

Disadvantages of iPhone Wi-Fi Connection:

  • Low, in comparison with USB-connection, data transfer speed;
  • Quickly “devours” the battery charge;
  • You cannot restore or update the device firmware via Wi-Fi. for this, the Recovery Mode is used, in which it is impossible to connect the device wirelessly.
  • It is impossible to restore data from a backup via Wi-Fi.
  • It is quite difficult to organize a connection (in the absence of a Wi-Fi router).

How to connect iPhone to computer via Wi-Fi

The only requirement that must be met to connect an iOS gadget to a computer wirelessly is that the device and the computer must be connected to the same network.

  • using a wireless router (Wi-Fi router);
  • using Wi-Fi module of a computer (laptop).

If you use a wireless router to organize a wireless network, which creates a shared Wi-Fi network, there are no problems. It is enough to connect your computer and iPhone to this network and activate the function of syncing the device with iTunes via Wi-Fi.

Create a Wi-Fi network to connect iPhone to Windows laptop

If there are no problems with the compatibility of iOS devices with Mac desktop or laptop computers (the connection is stable), then sometimes difficulties arise when connecting an iPhone to a Windows-PC via Wi-Fi:

  • iPhone and iPad won’t connect to WPA2-encrypted Wi-Fi
  • iOS devices do not connect to 802.11n Wi-Fi networks if WMM (Wi-Fi Multimedia) is disabled (Solution).

In a Windows environment, the DCHP server, which is responsible for assigning an IP address to connected devices, does not always work correctly and stably, therefore, when distributing addresses in automatic mode (when the DHCP server is enabled), the computer-iPhone wireless connection may be unstable. This is why the wireless network adapter on your computer needs to be assigned a static IP address:

    In Windows 7, go to Control Panel. Network and Sharing Center “and click on” Change adapter settings “.

Right-click on “Wireless Network Connection” to open the context menu and select “Properties”.

In the list “Selected components are used by this connection” select “Internet Protocol Version 4 (TCP / IPv4)” and click on the “Properties” button.

  • Check the boxes next to “Use the following IP address” and “Use the following DNS server addresses”, enter in the appropriate fields:
  • IP address: 192.168.хxx.хxx;
  • Subnet mask:;
  • Default gateway: leave blank;
  • Preferred DNS Server: Leave blank;
  • Alternate DNS Server: Leave blank.
  • Instead of “”, specify the parameters of your subnet (the first “xxx”) and assign a fixed address (the second “xxx” from 1 to 254).

    If you are using a wired LAN connection to the Internet and it is assigned the IP address “” or “”, the wireless connection should be assigned the address “”.

    Wireless and LAN IP addresses do not have to match and be on the same subnet.

  • Check the box next to “Confirm parameters on exit” and click on “OK”.
  • In the Network and Sharing Center, you need to create a computer-to-computer wireless network (point-to-point or Ad-Hock), to do this, click on “Set up a new connection or network”, select “Set up a computer-to-computer wireless network” and click “Next” twice.
  • On the “Give this network a name and select security options” page, fill in the fields:
  • Network name: enter any name for your Wi-Fi network (SSID);
  • Security type: select WEP;
  • Security key: enter the password for the wireless network, it will need to be entered on the iPhone when connecting to this network;
  • Check the box “Save this network settings” if you plan to connect the device to the computer over the specified network permanently and click “Next”. Network setup starts.
  • In the Network window “Network SSID is ready to use”, click on “Enable Internet Connection Sharing” if your computer has a wired Internet connection. This will make it possible to “share” the Internet from a computer via Wi-Fi to an iPhone, i.e. iPhone will be connected to the Internet via a computer (PC will act as a gateway).

    In the window that says “Internet Connection Sharing is turned on”, click “Close.” The wireless network is created, the computer is automatically connected to it (you do not need to connect it separately) and is waiting for devices to connect wirelessly.

  • On iPhone, go to Settings. Wi-Fi “and turn on the switch of the wireless module.
  • After the created network is found, tap on its name and wait for the device to connect to it. Done!
  • You can use the Wi-Fi connection between your iPhone and your computer for wireless syncing, backing up, downloading music, videos, importing contacts, installing apps and games from the App Store, etc.

    USB cables for iPhone: what are there?

    The USB cable for any new or refurbished iPhone is included. if there is no cable, this means one of two things: either they are trying to sell you an unoriginal smartphone (in other words, a Chinese fake), or the cable was lost by slow salon consultants who used the gadget package for their own needs.

    There are two types of USB cable for iPhone:

    The first is Lightning. Connectors with 8 contacts appeared on the bundled USB cables and chargers along with the 5th modification of the iPhone. The 7th modification iPhones also use Lightning to connect headphones. A distinctive feature of Lighting is that you can insert the connector into the connector from either side.

    On the other side of the cable for the iPhone, there can now be not only a classic USB connector, but also a USB Type-C connector, which looks more like a micro-USB.

    Why iPhone won’t connect to computer: possible problems

    The solution to the problem of connecting an iPhone via USB very often lies on the surface. Such a situation is typical: the user connected the smartphone via a cable, waited for the iPhone to notify by vibration about charging. but then nothing happens! According to the instructions given, we see that the next step is to confirm the user’s trust in the computer. “Trust Request” does not appear on the screen of a locked iPhone. It is enough just to unlock the device. the message will appear and the problem will be solved.

      If you encounter errors accompanied by SyncServer and MobileDeviseHelper messages, check if the same time is set on the PC and the gadget. Even a slight difference in time can lead to a connection failure. If the “USB device is not recognized” error, plug the cable into a different USB port on your computer. The error can also be due to the fact that the SIM card in the iPhone does not meet the requirements of the device. To connect correctly, it is enough to activate the “Airplane mode” through the “Settings”. If the computer simply does not see the iPhone, the problem lies in the cable or in the connector on the gadget itself. In any of these two cases, the user will have to spend a lot. to buy a new “lace” or to diagnose the device with subsequent repair.
    READ  How to remove iCloud from iPhone 7

    USB connection: pros and cons

    Connecting with a USB cable isn’t the only way to connect iPhone to iTunes and PC in general. iPhone with iOS version older than 5.0 can be connected to a computer via Wi-Fi. However, most owners of Apple technology “the old fashioned way” continue to use cables, and here’s why:

      The cable connection guarantees high data transfer rates (for USB 3.0. 4.8 Gbps). When connecting via Wi-Fi, you have to look back at the restriction set by your Internet provider. The device connected by a cable to the PC is recharged, while when connected via Wi-Fi, on the contrary, energy is consumed at an impressive rate. Connecting via USB is a very simple procedure, but not everyone will be able to organize Connect “over the air”. Only when connected via a cable can you restore data from a backup and perform a full reset.

    How to fix if iPhone not connect with PC via USB Cable in iOS 13

    Using USB ports to connect an iPhone also has disadvantages:

      The device is actually tied to the PC with a “string”. This limits the user’s options. to talk on the phone, he will have to interrupt “Connect”. The gadget takes up one of the USB ports. this can be a problem if there are only 2 ports on a laptop or laptop.

    How to connect iPhone to computer via USB and why you need to do it?

    Connecting an “apple” gadget to a PC via USB allows you to:

      Synchronize iPhone with iTunes: download music and other multimedia data to the device memory, transfer notes and contacts, transfer credentials. Create backups of the information stored in the device’s memory and restore data from backups. Restore and update the operating system. Free up device memory (which is worth its weight in gold) by transferring data to your computer hard drive.

    All of this will not be possible if the USB connection between iPhone and PC becomes unstable. Correctly connecting your iPhone to your computer is pretty simple:

    Take a USB cable and insert the 30-Pin or Lightning connector into the corresponding connector on the gadget.

    Plug the connector on the other side into any of the USB ports on your computer or laptop.

    Wait for the sound typical of a USB device connection. At the same time, the iPhone will vibrate to notify the owner that it is charging.

    The message “Trust this computer?” Appears on the smartphone screen. Confirm by clicking the corresponding button.

    An AutoPlay window pops up on the computer monitor. this already indicates a successful USB connection.

    Go to “My Computer”. you will see your iPhone in the list of portable devices.

    Click on the icon and you will have access to photos and videos that were taken with the iPhone camera. You will not be able to get to music in this way. you will have to install and run a program called iTunes.

    How to connect iPhone to computer via USB?

    Apple devices have a closed architecture. many operations require the use of a PC. That is why, when buying an iPhone, the user should be ready to connect this gadget via a USB cable much more often than any of the Androids. The operation of connecting an iPhone via USB seems simple, however, there are some nuances that do not allow working with this device as with a standard data carrier.

    Connecting an iPhone to a PC via USB is no more difficult than Android: in any case, difficulties are possible, but their occurrence is more an exception to the rule than a rule. Another thing is that by itself, connecting the iPhone via USB will not give the user ample opportunities. he will only be able to copy and delete photo and video files taken with the gadget’s camera, and for other operations he will have to master iTunes. Working with Android in this regard is much easier: when connected to a computer via USB, a smartphone with a “green robot” is defined as a flash drive.

    How to download a book to iPhone?

    And you did not even suspect that there is SUCH. And even at SUCH LOW WHOLESALE PRICES.

    THERE ARE live photos. IS THERE A VIDEO.

    Here is ALL infa about AWESOME GOODS and OH as you need!

    Purchase HERE.

    First of all, let’s figure out why you need a tablet. Here are its main uses:

    Internet browsing
    Watching films
    Watching Internet Videos
    Reading electronic documentation (pdf, djvu)
    Reading e-books (fiction)
    Listening to music
    Use as a large navigator, work with maps
    Special applications (equipment control, etc.).

    In my opinion, fiction should not be read on a tablet. for this, an e-book with a screen on electronic ink e-ink is more suitable. At the same time, it is inconvenient to read documents in pdf format on such books (as a rule, pdf is designed for a large format, therefore, for comfortable reading you have to constantly shift the picture, and on books with e-ink it is rather slow), so reading electronic documents. prerogative of the tablet.

    Perhaps the main thing in any tablet. screen, so let’s start with it.

    There are four standard screen sizes. 7 “, 8”, 9.7 “and 10”.10.1 “. In this case, screens 7” and 10 “have an aspect ratio of 16:10, and 8” and 9.7 “. 4: 3 (remember that the iPad has a screen size of 9.7 “, iPad mini 7.9”. Aspect ratio for both. 4: 3).

    A wide screen 16:10 is better for watching movies. A 4: 3 tablet is more convenient for browsing the Internet and reading: it can be used both horizontally and vertically. A tablet with a 16:10 aspect ratio is not very convenient to use vertically. it turns out to be too narrow and tall.

    The big advantage of a seven-inch tablet. light weight and size. Easy to hold for extended periods of time and fits into a jacket or purse.

    The 7 “screen size is enough for games (almost all of them were created for mobile phones with much smaller screens) and watching movies on the go. The 7” wide screen is too small for the Internet and reading. Yes, everything is visible and can be used, but at 8 “-9.7” it is much more convenient. Tablets with a wide screen 10 “-10.1” are not very practical in my opinion.

    When choosing a tablet size, you should pay attention to its weight. Good weight for a 7 ” tablet. 300-330 grams. The 9.7 “tablet weighs 586-730 grams (iPad weighs from 601 to 662 grams depending on the model). The 662 grams of the New iPad 4G is quite tangible. It is difficult to hold it for a long time over a canopy.
    After the iPad mini was released, Chinese 8-inch tablets with a small weight (390-430 grams) began to appear, but they are still far from the 309-gram iPad mini. All older Chinese 8-inch tablets are very heavy. from 490 to 620 grams.

    In seven-inch tablets, screens with resolutions of 800×480, 1024×600 and 1280×800 pixels are used. If you plan to use a tablet for surfing the Internet and reading, I strongly recommend not to take a tablet with an 800×480 pixel screen, because the text on it does not look clear enough.

    Modern 8 “tablets have a resolution of 1024×768 pixels, but there are also older models with 800×600 pixels. Of course, I do not recommend taking a tablet with an 800×600 pixels screen, because 800 pixels wide is not enough even for a 7-inch screen.

    For 9.7 “tablets, the standard screen has a resolution of 1024×768 pixels (like the iPad 2), but tablets with retina screens of 2048×1536 pixels (like the iPad 3 and 4) began to appear.

    On sale there are still old models of tablets with a resistive touchscreen. It requires tapping the screen and does not allow full multi-finger control.

    I recommend buying a tablet only with a capacitive sensor.

    The most popular processors in 2012. dual-core Rockchip RK3066 and Amlogic 8726-M6 (MX), operating at frequencies of 1600 and 1500 Mhz. These processors are built on the Cortex A9 architecture and have an integrated Mali 400 GPU. Cortex. it is not a processor model, but an architecture of ARM, which itself does not produce processors. You can read more about the types of processors here:

    Now there are tablets on the new Allwinner A31 quad-core processors with an integrated PowerVR SGX544 MP2 graphics core. Most likely these processors will be very popular in 2013 models.

    There are tablets on sale with older processors. So at the beginning of last year, the AllWinner A10 chip was popular, which includes an A8 core operating at a frequency of 1000-1200Mhz and a Mali-400 graphics core. Although this processor is outdated, the Internet, videos, toys work fine on it.

    Until now, there are cheap tablets on the market with VIA WM8650 800Mhz processors. These tablets are extremely slow (so slow that you won’t even be able to fully use the Internet and play the simplest games).

    The tablet has three or four types of memory:
    1. RAM. RAM required for programs to run. Occurs from 256MB to 1GB. Must be at least 512 MB, but better than 1GB.
    2. System flash memory on which the operating system and programs are installed. It is desirable that this memory is also 1GB.
    3. MicroSD card slot. The card can store video files, music, data, as well as install some large programs and games.
    4. Internal storage. Replaces or supplements the memory card. Usually it has a volume of 8GB or 16GB, while the real volume will be 6 or 14GB. It is not at all necessary to strive for 16GB, because you can always use a microSD card.

    READ  Where are copies of iPhone stored on mac OS

    There are quite a few Chinese tablets with a built-in 3G modem and a SIM card slot. Therefore, it is hardly worth hoping to find a tablet with 3G that is good in all respects, but there are two solutions that replace the built-in 3G in the tablet:
    1. Most tablets support external USB modem. At the same time, you don’t even need to configure something: after connecting the modem, the tablet goes online itself. It is only important that your modem is included in the list of supported ones. Most standard modems that all support. Huawei E1550, E1750. To connect the modem, you may need an OTG cable, which may not be included in the tablet package.
    2. All smartphones on Android (and iPhone too) can work in hotspot mode. In this case, the phone becomes a wi-fi router. Setting up this mode in your phone is very simple.

    All tablets have a USB port for connecting to a computer, almost all have an OTG mode (connecting USB devices to a tablet). For OTG, there can be either a large USB connector, or a separate MiniUSB connector, or even a single MiniUSB connector used both for connecting to a computer and for OTG through a special OTG adapter. For some tablets, the adapter is included, for some you need to buy it separately.

    Through OTG, you can connect USB modems, flash drives, card readers, mice, keyboards to the tablet.

    Most cheap tablets don’t have a GPS module. If you plan to use your tablet as a navigator or to work with maps, look for a model with a built-in GPS receiver.

    All tablets have a front camera (some also have a rear camera). Do you need it? In my opinion, not very much. Frontal, except for Skype. Using a tablet as a camera seems pretty funny to me. The camera quality in most Chinese tablets is very low. manufacturers put the cheapest camera “for show”.

    Many tablets have an HDMI output (usually a MiniHDMI connector) for connecting to a TV.

    Many Chinese tablets do not have any name or model. When buying such a tablet, you need to understand that if something goes wrong, you will be left alone with it and will hardly find help on the forums. You can also not count on new firmware. However, almost every unnamed tablet. analogue of some well-known model, but the analogy may not be complete.
    I recommend choosing a tablet that has a brand name and model. Before buying, it’s worth seeing if there is a thread dedicated to this model on the main tablet forum. ( and The Chinese brands Ainol, YuanDao (Window, Vido), Pipo, Onda, Ployer momo, Hyundai, Cube, Ramos have proven themselves well.

    Almost all Chinese tablets run Android. Tablets with Android version below 4.0 are no longer worth buying.

    Before buying, it makes sense to see if there are alternative and improved firmware ( and So for many Ainol tablets there are Cyanogenmod firmware that completely replaces Chinese Android assemblies.

    It is very important that the tablet operating system supports Google Play (formerly Android Market). This will allow you to install any programs of which there are hundreds of thousands on Google Play. If support is not available initially, it can be difficult to install, and sometimes impossible.

    I hope the above recommendations will help you with choosing a tablet.

    So, what, in my opinion, is not worth buying:

    When buying a Chinese tablet, I would choose one of the options for myself:

    7 “IPS 1024×600 or 1280×800, up to 330 grams, known model.
    2.8 “IPS 1024×768, up to 430 grams, known model.
    3.9.7 “IPS 2048×1536, up to 650 grams, known model.

    Don’t be surprised that I am not specifying the processor type. The fact is that with a combination of the type of IPS matrix, good resolution, low weight and a well-known model, the processor will automatically turn out to be modern.

    I note that any Chinese tablet is likely to have some drawbacks. Perhaps you are lucky, and the flaws will be so insignificant that it will seem that they are not. But in any case, you need to understand that the Chinese tablet will be inferior to the models of world famous manufacturers, but it also costs 3-5 times cheaper.

    p.s. Six months ago, I already wrote about choosing a Chinese tablet (http: //ammo1com/270349.html).
    During this time, a lot has changed, so I brought the article about the choice to today’s realities. “

    I want to share my impressions of using the Book 360 Plus reader.
    For reference and understanding what we are talking about: “reader”. it is a dedicated e-book reader.
    You can, of course, read e-books on tablets, smartphones, netbooks and other universal devices, as I tried to do it before. But even after using the reader for a short time, I rediscovered the old truth that for comfortable work the best solution is a specialized one, which the reader is. Hence, in fact, the popularity of these devices.

    Here are the main, in my opinion, the advantages of readers and advantages over other devices used for reading e-books:
    Light. I tried reading books on a 7-inch tablet. The first 15-20 minutes. nothing, and then there is a keen desire to take with both hands. I’m not talking about women’s hands.
    Comfortable. So far I have only tried the Book 360 Plus Reader, and on the side of it there is just a wonderful ledge with large buttons for turning pages, which are very convenient to press with the same hand with which you are holding the reader. To understand this advantage, let me compare it with reading on a tablet with a touch screen. the bezel around the screen is narrow, but you need to hold on to it, since careless movement and touching the screen leads to unplanned flipping and other manipulations with the text. Coupled with a built-in orientation sensor (this is when you turn the reader, and it automatically turns the text on the screen so that it is correctly oriented), this makes it very convenient to hold the reader by this ledge with one hand, either left or right.
    Compact. With a convenient cover that you put on the screen. You can actually carry it in any bag (even a small lady’s bag), briefcase, tablet. It won’t fit in your. Is that in a very large
    Large enough screen. In addition to the tablet, I tried to read texts on my old iPhone. I can’t say about the new 4th iPhone with a super screen, but on mine you can read some texts, but the pleasure is completely different.
    Energy efficient. After charging, I read for a week, but recharging was never required. Either I read a little. only on the subway on the way to work and back. Either he managed to recharge via USB while I was throwing off new books by connecting it to a computer.
    Omnivorous, that is, support for a mass of formats of e-books, documents, photographs, etc.
    When connected to a computer via USB, it looks like a regular flash drive. Create folders, fold, delete documents and books. do what you want. It can generally be used as a flash drive for data transfer. No additional applications required.
    Built-in WI-FI. It can be used to update the firmware (a separate item in the menu), download books from the Internet and even browse web pages.
    On the positive side, one might say, reported. I do not give a description of the technical characteristics. they can be found on the Internet by the name. “Book 360”.

    Now about what I didn’t like very much or didn’t live up to expectations. My attitude and appreciation for it changed as I used it. And I tried to use it with documents of the following type (in that order):
    1. Formatted text
    2. E-book in word document format
    3. “Office” document in word format (with tables and complex formatting)
    4. PDF document with text layer
    5. PDF document without text layer, that is, just an image packed in PDF format (in my case it was a scanned A4 magazine)
    6. Reading an e-book from a WWW page (site
    So, in turn:
    “Simple text” is read with a bang. The font can be enlarged / reduced, everything scrolls quickly and well. In general, it would be strange if it were the other way around. I have not tried it, but I am sure that the situation is exactly the same with books in the FB2 format and other specialized “book” formats.
    Books and texts in DOC and RTF format (so-called Word documents). readable, scalable, in general, everything is fine too.
    Documents (and not just some text there.) In DOC format. In my case. it was a document from work that I decided to study on the way home. This document already contained “headers”, headers and footers, tables and other office decorations. Reader did it simply. he reduced all formatting to “book style”. That is, there were some indents and headlines.In general, the meaning of the document was clear, but the tables were no longer readable.
    The PDF document with the test layer was also quite readable. Some kind of scaling worked, pictures were shown (not always in the place where in the original), but the pages were not scrolled so quickly. Reading is not very comfortable.
    A PDF document without a text layer (that is, just a “photograph” of a magazine page). Here I must admit that the reader failed. He showed the page, in the menu it was even possible to select options for displaying the page. entirely on the screen, in width, part of the page. But all this did not help much. The image was small, poorly readable, and flipping through it was generally painful. I spat and didn’t even read one article on a couple of pages. I think the main problem is the small screen, this is the flip side of the compactness coin.

    READ  How to Transfer Contacts from iPhone to iPhone

    And my last experiment is WI-FI and a built-in web browser. Since at home I have a WI-FI grid, it was a sin not to use and not try these functions. Since I could not update the firmware via the network. during the time I was using the reader, no new firmware came out, and to download books from BookLand (using a separate menu item) I had to register there, I decided to just try the built-in web browser.
    WI-FI tuned in without problems. The network name with login / password can be saved as profiles and then quickly connected to the WI-FI networks saved in this way. The “simple” search for networks works the same way. And then one pleasant discovery and one not pleasant one awaited me. The pleasant thing is that it turned out to be very simple and fast to enter the address. Means. “Simple and fast” for devices without keyboards or touchscreens. With the help of a joystick and a well-thought-out mechanism for entering characters, I entered the address of a news site and it opened very quickly! But then an unpleasant surprise awaited me. the site scaled and displayed not very well. precisely, it was not scaled at all, although it was displayed correctly. as on a computer (the arrangement of columns, pictures, etc.). As a result, the use of the built-in web browser is greatly hampered by the lack of scaling of web pages and inconvenient navigation around the page by sequentially jumping over all the fields and links of the page (there is no mouse!). But what is even worse. a similar picture with scaling (more precisely, with its absence) was observed when trying to read books directly from Books there with the simplest formatting. indents and paragraphs. But the text does not scale and you have to move the screen to the left and right to read the text. In a word. not good.

    In addition to all of the above, the reader has functions for viewing photos (albeit in black and white mode, built-in calculator, dictionary, calendar, notes, several games (including chess and DOOM.). There is a news reader application. I have not tested it.

    Summing up:
    the device is ideal for reading e-books (and not documents and non-scanned images of books, magazines, etc.). For these purposes, it is much more convenient than various multifunctional gadgets. Reading books in transport, while walking with small children (with a stroller) will be comfortable. Loading new books, deleting read books will not be difficult. Built-in WI-FI can be used to update firmware and download books from BookLand. The built-in browser is not finalized, although it is very promising.

    What is iTunes

    iTunes is a special program for synchronizing PCs with Apple gadgets. The programmers of the apple company created it specifically for the full-fledged work of a PC with original gadgets.

    Sync content over Wi-Fi

    After you set up sync with iTunes over USB, you can set iTunes to sync your device using Wi-Fi instead of USB.

    • Connect your device to your computer using a USB cable, then open iTunes and select your device.
    • Click Browse on the left side of the iTunes window.
    • Select “Sync with this [device] over Wi-Fi”.
    • Click the Apply button.

    If the computer and the device are connected to the same Wi-Fi network, the device appears in iTunes. The device syncs automatically when it’s plugged into a power source and iTunes is open on your computer.

    Connect iPhone to computer via iTunes.

    As we understood from the title, this post will be useful to the happy owners of Apple devices. To connect iPhone, iPad to a computer, we will use iTunes, which is also an Apple product.
    This program allows you to sync your iOS data with your computer.


    It is also a fairly popular program for Windows, which is no worse than the previous utility. It will be the best solution for those iPhone users who regularly download music and video files to the gadget. It has no unnecessary functions and a crammed interface. It can work with iPhone as with a flash drive, which is usual for new users who have switched to iPhone from Android gadgets.

    • Weighs little.
    • Less demanding in terms of PC resources (requires 2 times less resources compared to iTunes).
    • Wi-Fi sync provided.
    • When choosing video files for transfer from PC to mobile gadget, they are automatically recoded into the format required for it (you need to install an additional plug-in).
    • Allows you to manage programs (delete, make backups and transfer them from one smartphone to another device).
    • Allows you to control the iPhone desktop from a PC (work with icons, broadcast the desktop to a PC online).

    Benefits of connecting iPhone to computer via Wi-Fi:

    • The device is “not tied” to the computer and can be located from it within the range of the network.
    • The USB port of the computer is freed.
    • The iFunbox file manager “knows how” to work with iOS devices connected via Wi-Fi, which means you can download content and install applications from the App Store to devices via a wireless network.

    How to transfer photos from iPhone to computer via USB?

    Now let’s go directly to iTunes. Click on the iTunes icon and in the window that opens, click the “Accept” button

    In the next window, click on the phone icon (in the upper left corner). you will see the data of your device

    What are the advantages of a wired connection??

    • – First and foremost is the speed of data exchange.
    • – Ability to install and uninstall applications
    • – Ability to charge the gadget
    • – Ability to restore the device
    • – Software update

    Of the minuses, I can only note that a USB port is required for connection (and on some brands of computers there are only two of them) and that your iPhone should be near the computer.

    How to connect iphone to computer via USB?

    To connect an iPhone to a computer via a USB port, you will need the gadget itself, the USB cable that comes with the device, and, of course, a computer. USB cables come in several modifications (depending on your iPhone model):

    How to Transfer Photos & Videos from iOS to Windows with USB in 2019

    It works with models such as iPhone 2G, iPhone 3G, iPhone 4G and iPhone 4S (iPad, iPad2, iPad3 and iPod Touch are also supported).

    The second option is the Lightning 8-pin connector:

    It fits more modern models such as iPhone 5, iPhone 5C, iPhone 5S, iPhone 6 and iPhone 6S (iPad Mini, iPod Touch 5G are also supported).

    There is also a USB Type-C cable. Unlike Lightning, it can be inserted either side, and it has a huge bandwidth. up to 10 Gb / s.

    Connecting iPhone to Computer via USB

    To connect your iPhone to your computer via USB, you need to download iTunes. The fact is that the delivery of the program contains the necessary drivers for connecting Apple devices, and, in addition, many necessary functions for them.

    So, go to and click on the “Download” button

    After you have downloaded the program, you need to install it on your computer. To do this, run the downloaded file. a window will open in which you will need to click the “Next” button

    The next window shows you where the program will be installed: click on the “Install” button

    After a few minutes, the installation will be completed successfully

    do not forget to uncheck the “Open iTunes” tab until you need to launch the program.

    Now it’s time to connect your iPhone to your computer via USB. To do this, connect one end of the USB cable to the USB input of your computer, and the other, respectively, to your iPhone.

    When connected, your iPhone will vibrate to indicate charging.

    The installation of the device driver will begin, upon completion of which the device autorun window will pop up on the monitor

    Then the connected device will appear in the “My Computer” tab as an additional icon

    By clicking on it, you will see that the internal memory of your device will open.

    You can only view photos and videos, however, you can listen to music only if you are connected via iTunes.

    The computer does not see the iPhone via USB but is charging: what to do?

    But what if you connected your iPhone via USB, charging is in progress, but the computer still could not detect your iPhone? Let’s look at some methods to solve this problem.

    • – First you need to reboot both devices in order to make sure that neither of them freezes.
    • – The next step is to check all USB ports: they may not work due to broken contacts. To check, take any USB flash drive and check each USB port one by one.
    • – Disable third-party software (antiviruses, firewalls etc.), do not forget to include them after checking.
    • – Also unlock your phone, perhaps there will be an inscription “Trust this computer?”

    Without an affirmative answer, no synchronization will take place, only charging.

    • – Try changing the USB cable. it may be out of order. Sometimes, even without visible damage, the cable is inoperative.
    • – Try resetting your phone (don’t forget about backups)
    • – You can also clean the USB connector of the cable. it may be dirty.
    • – Check if the time is set correctly both on the computer and on your phone (even a small discrepancy will lead to the computer not recognizing the iPhone via USB)

    If more than one method did not help you, then most likely you have a broken charging connector, and you should change it at a service center.

    NNCXV.INFO 2021