Headphones don’t turn off on iPhone

Table of Contents

How to turn off headphone mode on iPhone?

Sound not working on iPhone after unplugging headphones? It is necessary to turn off the headphone mode on the iPhone: this problem occurs in the iPhone 5, and in the iPhone 5, and in the iPhone 6. For later versions, the plus or minus recommendations are relevant, and for the lighnting connector.

Causes of problems

The reasons why the headphone mode does not turn off in the iPhone can be roughly divided into 2 types: software and physical. The most common are the following:

  • Dirty headphone jack.
  • Water entering the connector.
  • Broken headphones (plug, cable, etc.).
  • Breakdown of the phone (speakers do not work, other processes in the phone).
  • System crash when headphones were disconnected from the phone (CPU overload, glitch, etc.).
  • Software errors in general (incorrect operation of jailbreak, different applications, etc.).

The most common options are: a failure during the disconnection of the headphones (the phone rebooted, the battery “sat down”, the processor was overloaded) and physical contamination of the connector (dust, water).

In order to turn off the “stuck” function of the headphones on the iPhone, you need to check the possible causes. We will exclude options for problems in turn: from simple to more complex.

  • Disconnect and reconnect headphones.
  • Reboot phone.
  • Enable and disable flight mode.
  • Check device settings, turn off all running applications.
  • Setting an alarm, ringing and other not obvious solutions.
  • IOS update.
  • Cleaning the connector.
  • Reset.

Of course, if you drop your phone in water or snow with the headphones on, chances are the iPhone’s headphone mode won’t turn off due to moisture getting into the connector. If the reason is not so obvious, let’s go through all the options in more detail.

  • Sometimes this simple action works. Even often. You can try to connect other headphones. best of all, obviously of high quality. The problem may be in the headphone plug (poor insulation and the like), which sometimes happens with very cheap “no-name” headphones. 1.1 You can try connecting and disconnecting wireless headphones. If you have it at hand, be sure to try it. You can read how to do this in our detailed article.
  • A simple reboot can also help in a situation where the iPhone does not wake up from headphone mode. If that doesn’t work, you can try Soft Reset. Usually, such a reboot makes sense when the device as a whole is frozen. This does not destroy data. If the phone itself is working, go to the settings: Basic. Reset settings, choose reset without deleting content. If the phone itself “hangs”, you need to use a key combination, which differs depending on the models, it is best to look at specific combinations on the support site. 2.1 An interesting reboot option: turn off the phone with the headphones connected to it, turn it on, press the volume up or down button, turn off the headphones and change the volume again. Very often this helps to remove the headphone mode in the iPhone.
  • Flight mode disables all wireless modules. Sometimes the problem of the “stuck” headphone mode is associated with “glitches” in one of the communication modules. Best of all, turn on this mode for a few minutes.
  • We close all running applications. If there are any “tweaks”, programs not installed from the AppStore, etc., it is better to remove them altogether. Next, go to: Settings. Universal Access. Sound Source. Typically set to Automatic. Select “Speaker” instead and turn on the music or make a call (of course, with the headphones turned off). This way you can check if the speakers on your phone are working. And the problem itself, when the headphone mode in the iPhone does not turn off, this can also solve.

If after doing all of the above, the headphone mode in the iPhone still does not turn off, it’s time to contact the service center.

Purge the connector on the iPhone

Another method of mechanical cleaning is using a can of compressed air (spray) or a vacuum cleaner. Here are a few ways to remove particles trapped in the port:

  • Blow into the nest. Blow air gently into the headset jack. This removes small particles.
  • Spray can. Generally, these sprays are used to clean computer keyboards, but such a can is also suitable for cleaning the port. The small plastic mount is ideal for a small connector. Direct the air stream to the appropriate slot. This will clear up more severe clumps and patches of dust.
  • If there is too much debris, then it is better to use a vacuum cleaner. Better to use a small device and a small attachment. Route the hose so that the vacuum cleaner and smartphone do not touch hard.

Then check if the lower speakers are back in working condition.

Problems and solutions

It often happens that the smartphone does not go to the standard state and remains in the headphone mode. How can you verify that the speakers are really in a different state and not just broken? There are two ways:

  • Press the volume swing and switch the side top trigger to the “Call”. “Silent” mode. If the inscription above the headphone bell does not change, then this is clearly the problem;
  • Go to “Settings”, then to the item “Sounds”, then to the tab “Ringtone”. Switch between standard melodies, use the side volume keys. As in the first option, if there is no “Call” inscription and there are no sounds from the speakers, then the problem is most likely that the phone is frozen in the wrong mode.

Moisture in iPhone

The pins in the connector may not work correctly because the iPhone was in water or fell in the snow. Even the smallest raindrops can cause a problem. In this situation, you need to act quickly, otherwise the contacts may oxidize and you will have to carry the smartphone to the service center. So, here’s what you can do:

  • Remove large drops of water with a vacuum cleaner and direct the jet to the ports, carefully pulling out excess moisture;
  • Next, you need to dry the device with a warm hairdryer, but not with hot air. Use strong pressure.

Disconnecting Bluetooth Paired Devices

It often happens that users forget that a third-party device is connected to the device. for example, a wireless speaker or headset. Accordingly, if you turn off these devices, then the problem will be solved. Do the following:

  • Go to the “Settings” of your iPhone and click on the “Bluetooth” tab;
  • Remember, disabling in Control Center is not enough. By the way, check out the My Devices tab. This list displays all previously connected storage devices. The fact that any of the devices is active is signaled by the “Connected” status. Just move the checkbox to the left on the label.

Updating the software

Try updating to the latest iOS version if you haven’t already. With each new version of the firmware, Cupertinos add not only interesting features, but also fix bugs found by most users. This is likely to fix the problem.

Sometimes it happens that in some version there was this problem, but after the next update it was fixed. You can also read about this on various thematic forums. If the problem is global, they will immediately write about it in all publics and sites.

Reboot the device

Restarting is a real panacea for many problems on your smartphone. This will help not only restore the lost functionality of the device, but also help to deal with the freezing of the mode. It is possible that there was some kind of technical glitch. Especially if you rarely rebooted your phone before, then this can clearly be the cause of the error. To do this, follow these steps:

  • Press the Home button twice and close all active applications;
  • Hold the lock key and swipe the screen to turn off;
  • Turn on your iPhone in the standard way.

Checking device settings

Check how the “Call Audio Routing” function works (in Russian. “Sound source”). This parameter is responsible for the sound that is heard during calls over cellular, Skype or FaceTime.

  • Click on the “Settings” tab and go to the “Universal Access” section;
  • Find the Sound Source parameter here. By default, there is a checkmark on the “Automatic” option (while you hear the subscriber through the upper speaker). The user needs to change to “Speaker”;
  • Try making a FaceTime call or making a mobile call. So you can check if your lower speakers are broken, and at the same time solve the problem with the headphone mode;
  • After you have checked the operation of the device, change the settings back to “Automatic”.
READ  How to back up on iPhone 8

Using other wired headphones

If you have a second pair of wired headsets, try connecting and disconnecting and reconnecting them again. It is possible that it was this accessory that caused the failure. We strongly recommend using official or authorized equipment. This is especially true of fake EarPods. manufacturers of such devices are unlikely to make a product conscientiously, as they are chasing a repetition of the appearance, but not the filling.

If you use the original device, then the number of failures will be minimized.

IPhone Headphone Mode Does Not Turn Off

And get the best deals from trusted masters.

  • Compare and choose the best conditions
  • Feedback from interested professionals only
  • Don’t waste time communicating with intermediaries

If iPhone headphone mode does not turn off, it indicates a malfunction. It so happens that the sound does not work in the phone, complicating the process of talking and listening to music through headphones.

In order to restore sound functions in the iPhone, you need to determine the reasons due to which the phone freezes in headphone mode. Most often, such situations occur due to mechanical damage or blockages in the connector. As practice shows, it is possible to independently solve the problem when the headphone mode is constantly turned on in the iPhone.

Why iPhone headphones don’t turn off?

If the iPhone headphone mode does not turn off or the sound disappears, you need to check the integrity of the jack. It so happens that dust, sand, particles of debris, etc. have got into the connector.In addition, it is impossible to turn off the headphone mode for the following reasons:

  • malfunctions of the operating system (does not recognize when the headphones are on and does not turn off the mode)
  • mechanical impact (if the jack is deformed as a result of falling, then the sound may disappear, and the phone will constantly be in headphone mode)
  • contact with liquids (if moisture gets into the connector, you will not be able to turn off the headphone mode or the phone may turn off completely)

Ways to restore your device

Apple technology is constantly being improved and modernized, iPhone breakdowns do not happen so often. If your iPhone has headphone mode turned on and doesn’t turn off as usual, follow these steps:

  • clean the connector with a toothpick
  • blow dust off the nest
  • reboot the device with the headphones on
  • turn on speaker mode
  • adjust the volume
  • turn off wifi

Try turning off the headphones function to switch to speaker mode. If the phone is frozen and does not respond to commands, restart it. If you cannot turn off the headphones function, you may need to repair your iPhone.

As a rule, rebooting the device gives a short result, and subsequently you have to contact the masters to check the operation of the headphones.

Symptoms of Audio Disruption on iPhone

Sound quality is one of the many advantages of modern devices. But there are times when audibility has disappeared and the speaker does not work in headphone mode. The following signs indicate a malfunction of the smartphone:

  • I can’t hear the interlocutor during a conversation
  • silent mode does not turn on
  • iPhone is in headphone mode
  • the sound is gone
  • headset does not work
  • Headphone mode does not turn off
  • volume is not added

You can try to fix some of these problems yourself. If the internal components of the iPhone are intact and the headphones are working, then there is a chance that turning it on and off will help in case the phone freezes.

Qualified repair

If your iPhone shows connected headphones, while they are disconnected, the phone constantly freezes and sound functions disappear, contact a professional technician. They will perform iPhone recovery in a short time.

Headphone mode freezing is a fairly common problem with which specialists are often contacted. Despite the fact that the iPhone uses only original headphones, problems also arise with them.

After a fall, the “headphones” mode may turn on and not switch to the speaker, in which case the specialists will quickly clean the connector, restart the iPhone and eliminate software glitches.

Ingress of water into the device

As a result of falling into snow, water, use in the rain, the smartphone accumulates moisture, oxidation of contacts occurs, and malfunctions occur. If the user remembers that the iPhone had direct contact with water, then dry the device thoroughly.

Using a vacuum cleaner, we remove relatively large drops of water from the body and connectors.

We take a hairdryer or fan heater and dry the device under a stream of warm air.

Wireless headphones for iPhones: features and cost

Foreign objects enter the headphone jack

Rare use of a headset or rough handling of the device quickly clogs the headphone jack. As a result, the jack contacts may close, informing the smartphone about connecting a headset and the need to turn on the “Headphones” mode.

Sequence for solving the problem:

Inspect the nest for foreign objects. For a more thorough check, use a bright light source. A modern flashlight or LED on another smartphone will do just fine.

Using a toothpick, needles, we try to remove all dirt from the connector. You can try to blow out the nest with a vacuum cleaner.

Cleaning should be done carefully so as not to damage the contacts. After the above procedure, restart your iPhone.

The manufacturer of iPhone smartphones cares about its users, therefore, has provided a function in the device that will not allow hearing damage when connecting headphones while listening to a song through the speakers at maximum volume. The monitoring system detects a change in equipment configuration and automatically lowers the volume to an acceptable level.

After disconnecting the headphones, the settings are restored, and the user can again listen to music through the speakers at maximum volume. But, for various reasons, the system malfunctions, as a result of which the “Headphones” mode remains on after removing the headset from the slot. How to fix the problem and return the ability to hear sounds from the phone through the speakers at a comfortable volume level, the user will learn from this article.

Problems with headphones, contacts

To get rid of the feeling that the failure is due to mechanical failure, remove and insert the plug several times into the connector. Do this with a delay to allow the operating system to determine when new hardware is plugged in and unplugged. If the device does not respond to user actions and continues to believe that the headphones are constantly connected to the smartphone, then try to restore or update iOS.

System crash

Restoring the functionality of the device after a system failure is often helped by a reboot. We use both options: turn on and turn on the iPhone in a standard way, or perform a forced restart.


Turn off the headphones, press the shutdown button.

We turn on the smartphone and check for a problem.

If the malfunction was not resolved, we connect the charger to the phone, hold down and hold the Home and Power buttons until the device starts to reboot.

Causes of the problem

To solve the problem, you need to find the cause of the malfunction. An ordinary user is interested only in those problems that he can cope with on his own without the involvement of specialists, therefore, one should look for it by carefully reviewing and analyzing a short period of operation before the problem appears.

Recommendations: 10 best headphones for iPhone 5 best wireless earbuds for iPhone 5 best headphones for iPad

Software recovery

The most radical method of solving the problem is to restore the operating system. If the malfunction is not resolved after that, then the iPhone should be taken for repair. Usually, smartphone users install various programs that change the operating system settings, but do not ensure the reliability of the functioning of all systems associated with the changed parameter. As a result, failures occur that lead to the appearance of various problems.

Make sure you have a new version of iTunes installed on your computer before proceeding with the restore. Update the program if necessary.

IPhone Recovery Sequence:

Launch iTunes and make sure the software recognizes the connected device.

If everything went well, iTunes will display a message asking the user to repair or update the software.

If the program does not recognize the iPhone, then perform a forced restart by pressing and holding Home and Power until the manufacturer’s logo appears on the screen, and the device enters recovery mode.

If the device runs on iOS 6 or later, go to settings and then to iCloud. Deactivate Find My iPhone.

The manufacturer recommends to repeat the procedure for the transition to recovery if the device is inactive for 15 minutes after the start of the transition.

Make a backup copy of all important information, as after restoring all user data will be deleted from the device.

The new data will be downloaded and installed.

After recovery, you will need to go through the initial setup and device activation procedure. Refuse to restore from a backup, configure the software again. To activate your smartphone, you need a SIM card inserted into the device and activated.

Featured Materials: The 4 Best Swimming Headphones. 4 of the best Apple headphones. 5 best Bluedio headphones. 5 best stereo headphones. 7 best in-ear headphones. The 7 best headphones for kids. If water gets on the headphones or inside the mobile phone jack. How to improve the sound quality in headphones. Causes of hiss and wheezing in headphones

Check your phone settings

Check the settings of your device and whether turn on the phone call function in automatic mode. If you haven’t enabled, skip to the Basic section. Universal access. Sound source. Automatically.

Headphones do not work on iPhone 11 Pro / 11 / XS / XR / X / 87/7 Plus / SE / 6s / 6, what to do ?

Owners of iOS devices face a variety of problems in the process of using their gadget. For example, after connecting headphones to an iOS device, the sound is heard from the speakers and not from the headphones, the iPhone does not see the headphones, or after the headphones are disconnected, the headphone volume indicator continues to be displayed on the iPhone when adjusting the volume. But, as a rule, they are all solvable, and in this article, we will provide several methods to fix iOS device headphone problems.

READ  How to rename headphones on iPhone

Clean the headphone jack. (Does not apply to Airpods)

Prolonged use without proper maintenance can damage something as wonderful as the iPhone’s headphone jack. You need to clean the headphone jack regularly. You need to get the most ordinary toothpick, a piece of cotton wool and a little alcohol. You can also use a cotton swab.

IPhone / iPad or iPod Touch earphone stopped working, how to fix ?

Reset all settings

How to turn off headphone mode on iPhone? If the above methods do not help you turn off the headphone mode on iPhone, you can reset all settings. Go to settings. Basic. Reset. Reset all settings. This method can fix other iPhone problems too, such as black screen on iPhone, iPhone not showing incoming calls.

Switching the system language from Russian to another language

You can switch the system language of the device from Russian to another and then restart the device. If iPhone returns to normal, change the language to Russian.

How to turn off headphone mode on iPhone via utility

After restarting the system, the iPhone, iPad or iPod Touch still does not see the headphones. In this case, we recommend that you use the Tenorshare ReiBoot program, which is able to solve most of the iOS errors. With Tenorshare ReiBoot, your device will enter / exit recovery mode with all data saved, after which the error will be corrected. Detailed instructions for using the program are below:

  • Step 1 Download the Tenorshare ReiBoot program from the official resource, and then install it on your Mac or Windows. Please note that the program supports both platforms.
  • Step 2 Next, you need to connect your iPhone, iPad or iPod Touch to your computer using a USB cable. After connecting the device, run the program.

Step 3 Click on the active button “Enter recovery mode”. Wait a while, the iTunes logo will light up on the display of the mobile device.

Step 4 Now click on the “Exit Recovery Mode” button.

How to Exit Stuck HeadPhone Mode on iPhone 6 & iPhone 6s & Plus

headphones, turn, iphone

Your device will be rebooted and ready to go. Then try connecting the headphones again and make sure the iPhone / iPad / iPod Touch recognizes them.

If the problem has not been resolved yet, Tenorshare ReiBoot software is available in standard and professional versions. You can use the Fix all iOS problems feature, which can fix most of the iOS errors. For example, iPhone keeps restarting, iPhone won’t turn on, etc.

Software recovery

To combat the breakdown, you can try updating your phone to the latest version of iOS. This will help to remove the imperfections of the previous one, because the developers fix errors with each new version. To do this, you need to enable automatic updates in the Software Updates Settings.

Disable Bluetooth

A wireless headset can be used to solve the problem if it is at hand. The manipulations are as follows:

  • Connect wireless bluetooth headphones to iPhone. The action is performed by pairing via the Bluetooth module.
  • Check execution of all commands.
  • If the device works, play the song.
  • Remove headphones without disconnecting Bluetooth and restart the device.

If you used wireless headphones before the breakdown, the problem may be with them. When using counterfeit models, the likelihood of failures increases, so before buying, you must make sure that the product is original.


This method is recommended to be used in the event that all the others have not brought any result. It is quite radical and in most cases turns out to be more effective.

The user needs to update the system from the DFU mode. It is designed to completely reinstall the device firmware. To enter this mode, you must do the following:

  • Connect your phone to your computer using a wire.
  • Turn off the phone.
  • Ensure complete shutdown of existing systems.
  • Press the combination of commands “Home” and “Power” at the same time, holding them for 10 seconds.
  • Release the Power button while holding the Home button.
  • The command must be carried out until iTunes recognizes the new device (this takes 10-20 seconds).
  • Next, the device is flashed. If the user needs to return to its current version, it is necessary to agree with the suggestions of the wizard. in this case, iTunes downloads and installs on its own.

Connecting and disconnecting headphones

First, you need to reconnect your headphones to your iPhone. Then turn on the playback of a random sound or melody. If, at the same time, music is heard not only in the headphones, but also from the speaker, this indicates a breakdown.

After that, you need to disconnect the headphones from the phone and check the sound on the speaker, adjusting the volume using the buttons on the side panel. In this case, the iPhone must be in the “Call” mode.

Flight mode activation

The method of turning on and off the “flight” mode is not often used. Its effectiveness is explained by the fact that the device is still formally connected to headphones, which will help eliminate this method.

During its use, the Bluetooth module is disabled, which affects the problem. To activate the flight mode, you must press the power button, and then select the appropriate command. the icon depicts an airplane.

Why iPhone May Think Headphones Are Connected

The volume mode recognition system has drawbacks. The OP is not perfect, so users are faced with the problem of auto-changing. It manifests itself like this:

  • The user disconnects the headphones from the smartphone.
  • The device does not go into the “Call” mode and remains in the previous.
  • Due to the lack of headphones, there is no sound on the phone.

This phenomenon is caused by external factors: the ingress of dust particles, pieces of dirt or water droplets into the connectors, excessive humidity. The main factor is mechanical damage.

In this situation, the user has a need to switch the mode on his own.


The command removes all current parameters of the device. Only the files of the internal memory remain. To do this, follow these steps:

  • Select the type “Basic”.
  • Activate the command “Reset settings”.

How can you turn off iPhone mode

The problem can be solved not only with the help of repair. There are several methods for dealing with problems. Before carrying out the actions that will be described below, you must remove the cover.

Airpods wireless headphones won’t connect

The operation of wireless headphones is in no way related to the presence of external connection ports. As the name suggests, the signal is transmitted remotely, in this case via a Bluetooth connection. Therefore, the cause of the malfunction may lie both in the headphones themselves and in the equipment of the phone.

Most often, the iPhone “does not see” Airpods due to a broken Bluetooth module (or antenna). This microcircuit is responsible for finding and pairing all devices available in the range. After the phone has been dropped, hit, or liquid gets into it, the module may fail. It should be noted that in this case, the iPhone will not see any Bluetooth devices (or the connection will be unstable). As in the previous paragraph, a faulty audio codec (absence of any sounds) may also be the cause. When updating the firmware, a software failure may occur, as a result of which the Bluetooth module will stop working correctly.

Why iPhone doesn’t see headphones?

This is not to say that the problem with connecting headphones is too common on Apple smartphones. But, nevertheless, from time to time, customers come to our Apple Pro service center (Moscow) with a complaint that their iPhone “does not see” the headphones.

In other words, the smartphone does not react in any way to the connection of headphones (wired and wireless), respectively, they do not work (no sound). Let’s look at the reasons for such a malfunction.

Apple wired headphones won’t connect

At the very beginning, let’s remember that all models up to the iPhone 7. smartphones had a built-in 3.5 audio jack (mini-jack). This is the standard headphone jack used by almost all portable equipment manufacturers. But, starting with the “seventh” model, the iPhone lost this connector, instead, EarPods began to be connected through a single and universal Lightning port. Therefore, the breakdowns of different iPhone models are different.

As a rule, the reason that the iPhone does not see wired headphones is a faulty connector. In the case of the 3.5 audio jack, it is often clogged with dust and dirt, foreign objects and various liquids get inside. This leads to corrosion of the socket itself, or of the internal contacts. The same breakdown factors apply to the Lightning port, with the only difference that in most cases it is not only the headphones that stop working. iPhone refuses to charge, does not connect to a computer, you must constantly move the plug in the connector to “catch” the desired position.

In addition to the problem with the connector, the cause may also be a breakdown of the audio codec (iPhone sound chip). In this case, the sound will disappear not only in the headphones, but also in the speakers. A separate category can be attributed to various software failures that do not happen very often. If the system update is unsuccessful, after a poor-quality repair or flashing of the smartphone, problems may arise with the detection and identification of the connected headphones.

IPhone Diagnostics and Headphone Troubleshooting

There are many reasons why iPhone is unresponsive when headphones are plugged in. We have listed just a few, the most obvious ones. But professional diagnostics of a smartphone is indispensable. Come to our Apple Pro service for a specialist inspection of the gadget, after which the exact cause of the malfunction will be established. We will offer the best and most affordable iPhone repair options.

READ  Microphone icon on iPhone lock screen

How to set up headphones on iPhone

You usually only need to set up wireless headphones. If they are used for the first time, then you need to make sure that the latest version of the software is installed on the smartphone. Then you should perform the following actions:

  • Go to Home Screen.
  • Open the case with the headphones and place them next to the phone.
  • Wait for the setting animation to appear on the display.
  • Click “Connect”.
  • In the case of the Pro version of the headset, carefully study all the instructions.
  • Click “Finish”.

The accessory may not connect due to moisture getting into the phone case

Important! If you’re signed in to iCloud, the headphones will automatically set up to work with any supported Apple ID-connected devices.

Why iPhone can’t see headphones via Bluetooth

Even iPhones, which are the standard of reliable and modern mobile technology, can have problems identifying the headset and other devices via Bluetooth. The most common causes of the problem are:

  • violation of the software integrity of the firmware, physical damage to the motherboard and individual contacts of the wireless module;
  • various software failures both due to unforeseen actions and during updates;
  • conflicts between system and user applications.

Important! Installing software from unverified sources can not only cause the operating system to fail and software conflicts, but also the complete or partial inoperability of the gadget.

The adapter must be plugged into the connector through which the iPhone is to be charged

The correct operation of Bluetooth is also affected by increased temperature, moisture, drops or surges in the home power supply during recharging.

How to turn on wired headphones on iPhone

The headset from the iPhone can be easily used on the iPad or iPod touch. If these are wired headphones with a 3.5 mm jack, you just need to insert it all the way into the corresponding jack on the phone. This should be done as carefully as possible, without connecting the accessory abruptly, moving it along the sides. If everything is done correctly, an icon will appear on the display, symbolizing that all contacts in the socket are closed and the headphones are successfully connected.

On iPhone 7 plus, the jet connector is at the bottom

Note! You can perform all these actions with other accessories with a 3.5 mm audio jet, but remember that it makes no sense to connect headphones with an impedance of more than 32 ohms. The power of the phone and the battery is not enough to produce the same high-quality sound that they are capable of when connected to a computer or laptop.

One earphone from the iPhone stopped working: what to do

Unfortunately, the quality of the Apple headphones is poor. Airpods have certainly propelled the company forward in this regard. But after constant use for a couple of months, they also often fail. The most amazing thing is that most often it is one earpiece that breaks, and it is the right one, which contains the microphone and the volume or video switch.

It would seem that you have to buy a new accessory or use it in one ear, but there is one catch. All sounds in the phone are reproduced in stereo mode: the song is decomposed into left and right channels. One can hear a voice, and another, for example, the sounds of individual musical instruments. This is why you may not always enjoy the sound quality when listening in one ear.

Airpods may not be supported on older iPhones

The solution to the problem is peculiar, since it does not make the second earpiece work. The point is to set the sound to play only in mono mode. It uses only one canal and all components pass through it to one ear. To switch to mono, you need to go to the phone settings, find “Universal Access” and switch the desired parameter.

Why iPhone doesn’t see headphones. what to do

Many people love to listen to music, it inspires and gives strength. It is better to do this with headphones so as not to disturb others, especially since their tastes may not coincide with the musical preferences of the music lover. Sometimes with accessories of this kind, or rather with their connection, problems arise. The owners of expensive technology are not immune from this, as are the lovers of cheap smartphones. It happens that the iPad, iPod or iPhone does not see the headphones. This material will tell you in as much detail as possible what to do if the headphones on the iPhone 7 do not work, how to set up the connection and what to do if one headphone suddenly stops functioning.

How to connect the speaker to the phone via Bluetooth

For users who like to listen to music through speakers wirelessly, the method of connecting a Bluetooth speaker to an iPhone will be relevant. This can be done as follows:

  • Put a speaker or a pair of them in close proximity to the phone to ensure future wireless communication. If the distance is too long, the connection may fail.
  • Turn on the speakers and switch to pairing mode by pressing the corresponding button on the case. If not, then you should carefully study the instructions for use of the speakers.
  • Go to the phone menu and select the “Settings” icon (gray gear).
  • In the general parameters window, find the “Bluetooth” item and go to it.
  • Switch on the module by moving the slider to the appropriate position. After loading, a list of devices in the immediate vicinity and ready to connect will appear on the screen. The speakers will be displayed under the name of their manufacturer or model.
  • Click on the names of the columns and connect to them. Pairing may take some time, most often it takes no more than 2-3 minutes. If the speakers are not visible, you can turn them off and on again or refresh the search list on your phone.
  • After pairing, the speakers are ready to go. You can test them, turn on any melody.

Note! Sometimes, to connect to the speakers, you need to enter a password, which is indicated on their case or box. If it is lost, please refer to the speaker manual.

What to do if the iPhone 7 does not see the headphones and why

First of all, it is worthwhile to understand that headphones for the iPhone, as well as for some other devices, are divided into classic wired and new wireless generation accessories. The latter were called Airpods, they are gaining popularity, gradually displacing confusing wired devices from the market.

If the iPhone 7 headphones are not working, then it may be due to a hardware failure.

For your information! Since their release, Apple has received many complaints about design and connection issues. If the phone does not see new wireless headphones, then most likely this happened due to errors in synchronization.

The reason for the lack of sound and the impossibility of identifying the device may be:

  • operating system updates that were incorrectly installed due to failures;
  • dirt, dust or sand has got into the headset jack, as a result of which the phone does not receive contact for detecting and switching to the listening mode from the headphones;
  • dirt or, more often than not, moisture has got into the phone case. It could oxidize the input pins for the headset, which also prevents the signal from passing to the processor;
  • the smartphone or headphones were dropped, as a result of which the loop responsible for transmitting signals was damaged.

How to Turn OFF Headphones Safety Notifications on iPhone

iPhone 7 Plus also suffers from headphone problems

Important! It is a careless attitude to equipment and accessories that causes most of the breakdowns that may not be related to headphones. Do not expose the phone to direct sunlight, leave it in damp rooms, or drop it on a hard surface.

The first thing to do is restart your iPhone or iPad. If that doesn’t work, you can reset all custom settings and updates. Perhaps the problem lies in the software part in which the failure occurred. After restoring the phone, it is advisable to return the backup copies of the updates that were prepared before the factory reset.

It often happens that some program simply does not allow the phone to turn on the vibration option. You need to remember which updates or software products were recently installed on the device, and uninstall them manually, and then check for the connection and sound.

If water gets into the phone, the contacts may oxidize and the operation of many modules will be impaired. Needed as soon as possible:

  • Unscrew the outer screws of the iPhone case and detach the back cover.
  • Using a suction cup or a sharpened credit card, carefully remove the display and remove its ribbon.
  • Dry the device with a hairdryer and remove oxidation with alcohol, if they appear.
  • Assemble the phone in the same sequence.

If after all this music does not appear and the headphones are not detected, the problem is in the connector. It is recommended to carefully clean it with a needle and cotton swab, which will remove dirt and dust lumps that have accumulated there due to wearing in a trouser

The headset may not turn on due to a defective adapter