How to change ink cartridge in Canon pixma printer

How to change the cartridge in a Canon inkjet printer

  • Gently flip open the printer panel to access the ink cartridge compartment. Usually it is held securely by one or two hinges located on the sides of the panel.
  • Press down on the latch on the cartridge so you can easily remove it from the compartment. Be careful, there is still ink in the plastic box and may spill, so wear gloves before replacing a used cartridge.
  • Now you need to remove the new ink cartridge from the shipping container. Do not discard this container under any circumstances: you will need it to store the used cartridge.
  • Use your fingers to pinch the tab of the protective tape on the new cartridge and gently pull it off the cartridge. Under the ribbon are the electrical contacts and the printhead nozzle.
  • Your printer should have a compartment marked “B”. This is where you must insert the black ink cartridge.
  • Insert the cartridge into this slot, slide it back. You should feel the cartridge click into place.
  • Repeat the process again, using only the color ink cartridge. It fits into compartment “C”.
  • Replace the panel that blocks easy access to the cartridges.
  • At this point, the green light on the top of the printer should start blinking. If you see the light is blinking green, the cartridges are installed correctly.
  • When the light stops blinking and remains on, the printer is ready to print. Perform a test print and, if necessary, run a printhead cleaning operation.

change, cartridge, Canon, pixma

Replacing a cartridge in a Canon printer on different models

Canon’s PIXMA line of printers is extremely popular with photo printer users. PIXMA prints near professional-grade photos from the comfort of your home.

Canon says the PIXMA line is more economical in terms of ink consumption compared to similar small multifunction printers designed for home use. Another great advantage of this range is the ease of replacing used cartridges with new ones.

In fact, the method of installing compact containers with paint on different Pixma models cannot be unified, it differs from model to model. However, there are a few general points to keep in mind regardless of which PIXMA model you own.

How to replace a cartridge in a Canon laser printer

If above we described the process of replacing ink cartridges for inkjet canons, now we will consider the procedure for replacing the toner cartridge in the i-SENSYS MF3010 laser model.

  • Lift up the scanner unit. Please note: the scanner cover must be tightly closed. If you cannot lift the scanner up, do not use excessive force to avoid breaking the MFP. To close the scanner lid, remove any document you may have left inside (stack of paper, magazine, book, etc.).
  • Hook up the toner cover on the left side and lift it up.
  • Using your fingers on the handle, pull the toner cartridge up and out of the printer.
  • Unpack the new toner carefully.
  • Lightly shake the cartridge from side to side five to six times to distribute the powder inside evenly.
  • Place the toner cartridge on a flat surface.
  • Grasp the tab of the protective tape and pull it completely out of the cartridge. The length of the tape is approximately 50 cm.
  • Insert the toner cartridge and along the guides, push it all the way into place.
  • Close the toner compartment cover. If the cover does not close, the toner is not installed correctly. Pull out the cartridge carefully and place it in the guides again, pushing down and back.
  • Lower the scanner unit to cover the toner compartment.

Something about Canon cartridges

Before purchasing supplies, you must ensure that the new cartridges you choose are compatible with your printer model. This article uses the Canon PIXMA MG2540s, MG2240, MG3640, MG3640S and i-SENSYS MF3010 models as examples. Specifically for these models, cartridges are needed that have the following markings:

  • MG2240: Canon PG-540 / CL-541;
  • MG2540s: Canon PG-445 / CL-446;
  • MG3640s: Canon PG-440 / CL-441;
  • MF3010: Canon 125 cartridge.

As you can see, the MG series printers only need a couple of consumables. a black ink cartridge (PG) and another color ink cartridge (CL). Some of the canons require a whole set of ink boxes. So, for example, for the PIXMA MX922 you will have to purchase five separate cartridges. two with black ink and three with color. Each main ink color (cyan (cyan). blue-green; magenta (magenta). magenta and yellow) is filled in here in a separate container, which must be inserted strictly into its slot. In general, the number of individual cartridges for Canon color inkjet printers can be from four to six.

If the Canon inkjet has only two cartridges. PG and CL, it means that FINE technology is used.

What is FINE technology

FINE technology means that the print head is not built into the printer itself, but inside the ink cartridges. In fact, the most important component of the mechanism with such a technical solution turns into a regularly replaced element. For the user, this gives maximum convenience, the problem with a dry or heavily clogged head nozzle can be solved by simply replacing the cartridge.

The second significant advantage of FINE is its high print speed. For many users, this indicator is one of the most important.

How to Handle FINE Cartridges

  • Do not touch the electrical contacts or the print head nozzle with your hands, otherwise this may adversely affect print quality.
  • If you are going to change cartridges, do so immediately. Never leave the printer without FINE ink tanks inserted in the slots.
  • Use new cartridges for replacement. In used ones, the head nozzle may be clogged. In addition, the printer will not be able to correctly determine when consumables need to be replaced if you re-install the old cartridge.
  • In order to maintain the print quality at the maximum level, do not remove the cartridges from the slots, planning to put them back in after a period of time. Opened ink tank dries quickly.

Note: If one of the FINE cartridges is out of ink, you can set up printing to work with only one cartridge for a while. If the PG block remains as a working one, then, accordingly, it will be black and white printing, and in no case in color. An empty cartridge must be left in the compartment, without ink tanks inserted into the compartments (at least one of them will be empty), the printer does not print.

Both color and black inks are used to clean the printheads. Frequent head cleaning will increase ink consumption and the cartridges will need to be replaced more frequently. It is better to make sure in advance that you have spare ink tanks and, if necessary, they could be immediately replaced in place of the used empty cartridges.

When the indicator flashes

It is normal for the indicator to flash briefly after replacing the ink tanks. However, if it blinks for a long time and an error code lights up on the mini-screen, then something went wrong. By the number of indicator signals, you can determine what the matter is. For example, on a Canon MG2540S, the display may indicate the following errors:

  • when the indicator blinks 4-5 times in a row, it means that the cartridge is installed incorrectly;
  • seven blinks of the indicator mean the cartridge is in an incorrect position;
  • if the indicator flashes eight times in a row, this indicates that the pampers are completely filled with ink;
  • 13 flashes of the indicator. it is impossible to determine the amount of remaining ink;
  • at 14-15 light signals, the printer cannot recognize the cartridge;
  • when the LED flashes 16 times, it indicates that the ink is out of ink.

These signals apply not only to the MG2540S, but to all other PIXMA MGs. To make errors appear as rarely as possible, follow the instructions and recommendations given above.

Rules to follow when replacing the toner cartridge

  • Remember that the powder inside the plastic case is flammable. Therefore, do not open the protective packaging or handle the toner if there is an open flame in the vicinity.
  • If coloring powder gets on your clothes or hands, wash it off immediately with cold water. It is not washed off with warm water, on the contrary, it penetrates deeper into tissue or skin.
  • Do not try to open the cartridge case. The protective tape does not need to be removed until you install the toner in the laser printer. Otherwise, the powder may spill out.
  • Do not use non-original cartridges. MF3010 requires cartridge code 125.
  • When removing the cartridge from the printer, keep it level, do not turn it up and down.
  • Do not touch metal contacts.
  • Do not open the protective cover of the drum unit.
  • Do not touch the contact pads inside the printer. They are energized.
  • Keep the cartridge packaging.

Canon printers, like any other printing device, require regular maintenance. With proper and timely service, the uninterrupted operation of the device will be ensured.

Removing a depleted cartridge

First of all, you should remove the empty container, in the place of which a new one will be installed. This is done literally in a few steps, and the procedure looks like this:

  • Turn on the power and start the printer. It is not necessary to connect to a PC.
  • Open the side cover and paper output tray, which is located directly behind it.

Press down on the ink tank holder until it drops down and makes a characteristic click.

Remove the empty container and discard it. Be careful, there might still be paint left in there. It is best to carry out all activities with gloves.

It is recommended that you install the cartridge as soon as you remove the old one. In addition, do not use equipment without an ink tank.

READ  Why does the printer print in yellow Canon

HP, Canon, Samsung.

How do I insert an ink tank into an HP printer? The products of this brand are diverse, in connection with which discrepancies in the instructions may arise. You can refer to the example. the DeskJet series, on the basis of which the steps are repeated.

  • open the cover, trays: for paper and receiving;
  • push back the upper fastener responsible for the width of the sheets;
  • load some A4 paper into the tray;
  • we fix the bundle of the width guide without effort.

Installation of the cartridge. It must match the hardware, or the printer will not detect it. We perform the following actions:

  • open the side panel (cover) where the holder is located;
  • press on the old inkwell, remove it, unpack the new one;
  • remove the protective film from the contacts and nozzle;
  • install the cartridge in place, hearing a click;
  • reinstall the rest of the ink tanks in the same way, if necessary;
  • close the side cover.

The final step is calibration and printing. The cartridges must be recognized by the hardware. To do this, we align the heads using the program:

  • connect the printing unit to the computer, turn it on (control panel. Start menu. Devices and Printers. HP Printing Preferences);
  • if the equipment is not displayed, add it to the list;
  • find the “Services” tab;
  • select the tool “Align cartridges”, start the process, following the instructions.

It remains only to reconnect the printer so that it can print.

Let’s move on to the Canon brand and look at the installation of ink tanks in this device. The principle is almost the same in all models, the containers are in the FINE format. Having purchased a new filled tank, we perform the following steps.

  • Removing the container. We turn on the power, start the printer. Then open the cover and paper tray, and then the cartridges will move to replace. We press on the holder, lowering it down until it clicks. We take out the capacity.
  • Immediately install the new ink tank by unpacking it without shaking it. We place it all the way into the back wall. Raise the locking lever until it clicks.
  • We close the lid of the tray. This will move the cartridge so that you can print.
  • If you need one color, we indicate this through the program. The path is as follows: Control Panel. “Start”. Devices and Printers. Canon. RMB. Printing Preferences. “Maintenance” (tab). “Cartridge Settings”. Next, select the inkwell and click “OK”.

Now reboot and start typing.

Let’s take a look at how the Samsung toner cartridge changes. The program informs about the need for this procedure. It is necessary to purchase an ink bottle corresponding to the model, shake it. Do not leave the container in the light, but hold it by the handle, without touching the working parts. We proceed to the replacement in the following steps.

  • Open the lid, take out the old container.
  • We release the new tank from the packaging, remove the protective tape.
  • Shake up to 6 times to distribute the toner inside.
  • We hold the inkwell by the handle, slowly insert, aligning the protrusions with the grooves of the printer. Clicking indicates correct location.
  • Close the lid securely.

Attention! If toner gets on your clothes, wash it off with cold water, otherwise the stains will adhere.

Reinstallation specificity for different types of devices

Now many people have a printer, having turned into a household device. over, the printing equipment is capable of working on a wide variety of surfaces. The most common designs are inkjet printers. The reasons are the relatively low cost, the ability to print on various types of paper. Consider how cartridges are installed in laser and inkjet printing devices from various manufacturers.

Insert the cartridge into the Canon printer

The need for replacement is required when stripes appear on the finished sheets, the picture becomes indistinct, or one of the colors is missing. In addition, the end of ink may be indicated by a notification displayed on the computer when trying to send a document to print. After purchasing a new ink tank, you need to follow the instructions below.

If you are faced with the appearance of streaks on the sheet, this does not mean that the paint has started to run out. There are a number of other reasons for their occurrence. Detailed information on this topic can be found in the material at the following link.

Step-by-step instructions on how to insert the cartridge into the device

There are two situations: change or refill print cassettes. One way or another, you will need to get them out of the printer, and then put them back in place. Consider this for several types of printing equipment.

How to insert ink cartridges into Canon pixma printer

Most users of personal computers have printers, today Canon printers are very practical and convenient not only in offices, but also at home. These devices have very good usability and functionality.

Canon printers, due to their versatility, are very much in demand and relevant today. Thanks to modern technology, in modern printers it is possible to print photographs or texts on almost any type of paper. But the problem is that the volume of the printer’s cartridges is not very large, and often it becomes necessary to either purchase a new cartridge, or go and refill your old one and re-insert it in its usual place.

The process of installing the cartridge is actually not difficult at all, although at first glance it may seem that inexperienced users will not be able to do this. If you have skills in computer technology, and you have a good command of a computer, then it will be too easy for you. You can very easily, independently perform simple manipulations, as a result of which you can put the cartridge in the right place in the printer. But still, if you are afraid to take risks, it would be better to go to a good specialist who is engaged in the repair and maintenance of modern technology.

The printer is an indispensable device in the office, and for some users even at home. But sooner or later, the ink in the cartridge runs out, as evidenced by a faint print or no picture at all on a sheet of paper. In order to replace it, you can call specialists. However, in fact, this is a fairly simple operation that can be easily dealt with even by someone who has no special relationship to technical devices.
Of course, you can answer that you do not know how to insert the cartridge into a Canon printer or another model of the device. But this is not as difficult as it seems. Almost every printing device has an instruction in which this process is described in some detail. But if for any reason you have lost this valuable booklet, then use the following recommendations.
First, open the front cover of the printer and remove the used cartridge. To do this, gently pull on the special part of the device. Remember that any use of force in this case is unacceptable, as it can lead to disastrous consequences. On some printer models, lightly press down on the cartridge until it clicks, and then gently pull it out.

How to insert a cartridge into a Canon printer

The used cartridge should be placed in a bag and disposed of. The latter must be done separately from household waste. Now you need to understand how to insert a Canon cartridge into the printer. First, let’s free it from the packaging. To do this, remove the protective tape and cover from it. Shake the toner cartridge from side to side several times before installing. At the same time, hold it firmly with both hands.
The toner cartridge must be installed in the photo drum immediately after you remove the protective cover. Installs this printer consumable along the guide rails. The cartridge slides gently into the printer. No effort should be made. The part should be free to stand on the rails and move. As a result, after installing the cartridge in place in almost all printer models, you can hear a quiet click. Then close the front cover.

How to insert a Canon cartridge into the printer

After a certain amount of time, the ink tank in the printer is empty, it is time to replace it. Most of the cartridges in Canon products are in the FINE format and are mounted in much the same way. Next, we will walk you through the process of installing a new ink tank in the printing devices of the above company.

How to install a filled container

You need to carefully take a full tank and place it where it was previously. Install until you click. The next step is to enable a “cleaning cycle”. getting good print quality. Then the equipment can be considered ready for operation. This way you can refill the cartridge yourself, saving time and money on going to the workshop.

The principle of operation of a single-lever mixer

As you know from the previous section, it is with the help of the cartridge that water is mixed. In this case, ball and disc ceramic valves are most often used.

The first option has a special head, which is responsible for the pressure force (regulated by the ball inside by lifting the lever), and temperature (controlled by turning). Only one connection point for hot and cold water.

In single-lever mixers using ceramics, the flow restriction is realized by grinding in ceramic plates. Their main advantage is durability: the material does not corrode, it is unpretentious to operating conditions.

Interesting: models like the Active Neo Doc are equipped with a retractable shower head. With them, you do not need to lift a heavy bucket or pan to collect water.

READ  Ep 27 Cartridge For Which Printers

Required tools

To replace the cartridge, you need to prepare:

  • hand tools: an adjustable wrench, as well as pliers and various screwdrivers;
  • a piece of clean cloth;
  • a descaling agent, such as a vinegar solution or liquid like WD-40.

When to replace the cartridge

Signs that a part needs replacement:

  • It has become more difficult to regulate the temperature regime, the strength of the flow. It often happens that when the lever is set to cold, hot water flows, and vice versa.
  • With the same position of the regulator, t ° is very different.
  • The tap continues to drip, even if it is closed.
  • It has become more difficult to move the lever.

How to change a cartridge in a kitchen faucet

There is nothing laborious about replacing: you can do it yourself.

Types of cartridges for mixers

In total, there are two main types of cartridges:

  • Ball. as the name implies, a special ball with two holes is provided in their design. When the user moves the lever, this ball closes the holes in the nozzles, one or two, mixing the flows. Only suitable for single lever valves like POLA.
  • Disc. have a different structure: instead of a ball, a disc is used. These are distinguished by their versatility, since they are suitable not only for models with one lever, but also for a two-valve.

Both options work in a similar way. Their price depends on the material and equipment. So, options with a stem made of cermet are cheaper than brass fittings with a thermostat. There are also non-separable products. Although they are inexpensive, if something breaks down, it will not work to repair the crane: you will have to change it completely.

Tip: if the sink in the kitchen is shallow, it is worth choosing a tap with a high spout, like that of VEGA. It will be more convenient to wash bulky items with it.

How to change a cartridge in a kitchen faucet: 6 steps

If the mixer began to junk, this does not always mean that another is needed in the kitchen. Sometimes everything is limited to such a trifle as changing the cartridge. It is not difficult to do it on your own.

Common causes of breakdowns

A faucet in a kitchen or bathroom can break down due to many factors. Here are the most common ones:

  • the metal has oxidized or salt deposits have appeared;
  • the device has worn out over time;
  • frequent water hammering damaged its structure;
  • original marriage.

Tip: to prevent the kitchen sink from getting clogged, you can install a shredder, for example, TURBO ELITE TE-50.

In any case, before starting work, you need to make sure that the problem lies precisely in the cartridge.

Changing cartridges in Canon printers

Canon has two types of printers in its product list. inkjet and laser. As you know, they differ not only in their implementation of paint application and printing procedure, but also in the type of cartridges and inks used. For example, laser equipment supports printing only in black, and the ink itself is powder. At the same time, inkjet devices print in different colors and contain several cartridges with liquid ink inside. However, the replacement procedure is almost identical, this will be discussed further.

1Where to place
a printer

Gone are the days of bulky home printers. Canon designers have long understood that every person wants a printer to be not only functional, but also beautiful. Relatively small size, streamlined shape, prominent buttons and versatile body color. all these are the characteristics of the Canon PIXMA family. Definitely, they will decorate any interior.

If you plan to use your printer frequently, we recommend placing it in a spacious area within arm’s reach. It is best not to place it on a bookshelf or in a cramped niche. space will be needed for the cables and the paper feed tray. Typically, the power and USB cables connect to the rear of PIXMA printers, and it is best not to bend the cables too much. you do not want to cause damage, short circuits or even fire.?

In addition, heavy photo paper, and on some models plain office paper, is loaded into the printer through the rear vertical tray. So you will need free space above the printer. How many? About A4 sheet. This also applies to MFPs. after all, you have to open the lid to scan and copy.

Please do not place your printer on the aisle, on the edge of the table or in any other dangerous places where it is easy to touch the wires or trays connected to it, or even the device itself.

Heat from sunlight or heaters, strong electromagnetic fields, vibration and shock will not be useful for the printer. Also, do not leave it outdoors. extremely high or low temperatures, precipitation and direct sunlight will definitely not benefit the printer.

We believe that by following these simple rules of technical feng shui, finding the coziest and most comfortable place in the room for your PIXMA will not be difficult.

Laser Color Printers

Accessing ink cartridges in Canon i-sensys LBP7110Cw

The location and design of the cartridges depends on the technology used in the particular device. For example, the Canon i-SENSYS LBP7110Cw printer uses a single-pass printing method and includes four separate print engines. The cartridges are located one after the other in a special tray. Their replacement is carried out as follows:

  • pull towards you and lower the cover on the front wall of the device;
  • pull the block out by the handle;
  • get out the cartridge that needs refilling;
  • install full.

Important: do not leave the cover open in the printer, remember that the drum unit may light up.

3Where is better
buy
cartridges

Which cartridges are right for your product? See the Canon website at http://www.Canon.com/printers/inkjet/ink-cartridge-finder/. on the website of your device or in the user manual. And who is better to buy them from, you can find out on the company’s website http://www.Canon.ru/where_to_buy/for_home/.

And remember that only genuine products and consumables will provide the most reliable device performance and the best print quality.

Toner cartridge

Canon i-sensys LBP7010C control panel

Canon i-SENSYS LBP7010C (7018C) color laser printers use multi-pass printing technology and, in addition to four blocks with toner, the design includes a drum cartridge, which is a drum with a cleaning system. If you open the top cover, you can access only the toner cartridges. In addition, only one of them is accessible, the rest are located in the depths of the device. Using the “Paper” button on the control panel. press and hold for 2 seconds. the printer is put into cartridge replacement mode. The Paper light is on and the toner light for the color ready to be replaced is blinking.

Once the button is pressed once again, the cartridges move and all lights flash. Do not open the printer cover at this time. When the transfer operation is complete, one of the lights keeps blinking to indicate which of the toner cartridges can be removed. So each of the blocks is sequentially transferred to an accessible position. Replacement is carried out in the same way and the cartridge of the color of the toner opposite to which the indicator is flashing is installed in place. To take the printer out of this mode, press and hold the “Paper” key again for 2 seconds. The video at the end of the article shows a visual instruction for removing toner cartridges from the Canon i-SENSYS LBP7010C printer.

Removing the old cartridge

First of all, you need to get the used or broken cartridge out of the device. This is done quite simply. you just need to lift the top cover, pull out the ink tank, or pull the handle to remove the toner cartridge. Detailed guides on this topic using the example of laser and inkjet devices can be found in our separate material at the following link.

After removing the old part, it is recommended to clean the printer to prevent dirt and various hardware problems. To perform this action, follow the instructions, which you can read below.

Drum cartridge

The unit is also called a copy cartridge. Although its resource is 7,000 pages, repair or replacement will still be required. When removing it, it is important not to touch the drum unit and contacts to avoid damaging them. Store the drum cartridge only in opaque packaging and should not be exposed to direct sunlight or strong light. To get the block, you need to sequentially do the following operations:

  • close the sub tray and open the printer cover;
  • remove the top of the multi-purpose tray and remove the paper;
  • open the front cover;
  • lift the levers on both sides to unlock;
  • pull out the drum cartridge by the handle.

Installing a new cartridge

As for the installation of new cartridges, there are some differences in inkjet and laser devices. Another article on our website is devoted to the mounting of individual containers, there is also a guide for the preliminary connection of the CISS. All the information you need can be found by clicking on the links below.

With laser printers, things are a little different. Here you should adhere to certain instructions, but it looks like this:

    After removing the cartridge, open the top cover of the printer and locate the corresponding slots to install the part.

Unfold the handle of the cartridge, and then carefully insert it into the slot, after making sure that the keys match.

Close the top cover of the equipment and prepare it for further printing.

Above, you have been introduced to all the important information about replacing the cartridge in Canon printers. All that is required of you is care, accuracy and the correct approach to the selection of new parts, because different cartridges, especially for laser models, are compatible only with certain printers.

READ  How to Connect a Canon G3415 Printer

Thank the author, share the article on social networks.

Any complex device requires careful handling, and the printer / MFP is no exception. He is like a pet or houseplant. the better you take care of him, the longer he will delight and serve you conscientiously. It is about how to properly care for the printer that will now be discussed.

Replacing the cartridge

If ink runs out or other errors occur during printing, the Ink Lamp and Alarm lamp blink orange to indicate an error. Count the number of flashes of the indicator and take the necessary actions. If there was an error

1Where to place
a printer

Gone are the days of bulky home printers. Canon designers have long understood that every person wants a printer to be not only functional, but also beautiful. Relatively small size, streamlined shape, prominent buttons and versatile body color. all these are the characteristics of the Canon PIXMA family. Definitely, they will decorate any interior.

If you plan to use your printer frequently, we recommend placing it in a spacious area within arm’s reach. It is best not to place it on a bookshelf or in a cramped niche. space will be needed for the cables and the paper feed tray. Typically, the power and USB cables connect to the rear of PIXMA printers, and it is best not to bend the cables too much. you do not want to cause damage, short circuits or even fire.?

In addition, heavy photo paper, and on some models plain office paper, is loaded into the printer through the rear vertical tray. So you will need free space above the printer. How many? About A4 sheet. This also applies to MFPs. after all, you have to open the lid to scan and copy.

Please do not place your printer on the aisle, on the edge of the table or in any other dangerous places where it is easy to touch the wires or trays connected to it, or even the device itself.

Heat from sunlight or heaters, strong electromagnetic fields, vibration and shock will not be useful for the printer. Also, do not leave it outdoors. extremely high or low temperatures, precipitation and direct sunlight will definitely not benefit the printer.

We believe that by following these simple rules of technical feng shui, finding the coziest and most comfortable place in the room for your PIXMA will not be difficult.

Preparing a new cartridge

It is recommended to unpack new cartridges just before installing them inside the device, because prolonged contact with humid air or bright light should be avoided. In the case of containers for an inkjet printer, do not touch the bottom of the part, and before mounting it is necessary to get rid of the protective tape by pulling on the special tail.

As for laser devices, here it is necessary to follow slightly different rules, because the part is quite fragile and sensitive. We have highlighted several main points:

  • Do not touch the green or cyan portion of the cartridge, the drum unit, the front side, or any other area. Hold only the provided handle to avoid touching the indicated areas.
  • Keep the green surface and drum unit away from light sources and use a dry, clean cloth or sheet of paper for protection.
  • Do not turn the toner cartridge upside down.

When unpacking the cartridge box, do not use sharp objects to avoid damaging the part itself. Remove the device from the film or cardboard box only according to the specified instructions.

After removing the toner cartridge, it is recommended to shake it from side to side several times to get rid of any lumps of powder and distribute it evenly throughout the container. It is advisable to do this over a sheet of paper so as not to stain the surfaces with powder. If dry ink gets on the fabric, wipe it off with a dry cloth, never use hot water. this will cause the ink to set.

Changing cartridges in Canon printers

Canon has two types of printers in its product list. inkjet and laser. As you know, they differ not only in their implementation of paint application and printing procedure, but also in the type of cartridges and inks used. For example, laser equipment supports printing only in black, and the ink itself is powder. At the same time, inkjet devices print in different colors and contain several cartridges with liquid ink inside. However, the replacement procedure is almost identical, this will be discussed further.

3Where is better
buy
cartridges

Which cartridges are right for your product? See the Canon website at http://www.Canon.com/printers/inkjet/ink-cartridge-finder/. on the website of your device or in the user manual. And who is better to buy them from, you can find out on the company’s website http://www.Canon.ru/where_to_buy/for_home/.

And remember that only genuine products and consumables will provide the most reliable device performance and the best print quality.

2How to replace
cartridges

Canon PIXMA inkjet printers and MFPs use liquid ink for printing, which, horribly, periodically runs out. To replenish the stock, in most models it is necessary to replace special ink containers. cartridges, and in some (PIXMA G series). to top up branded ink into the containers built right into the body. It is very easy to find out when ink is low. the printer itself will tell you about it. Of course, not by voice, but by a special message on the computer screen or the device itself.

How do you know how much ink is left? The software on your computer or the on-screen menu on the built-in screen, and for some models, the Canon Print Inkjet / SELPHY mobile app will help you with this. In addition, you can open the cover or lift the scanning unit of the device and look at the printhead with the cartridges inserted into it. On those that are low on ink, the red light will flash slowly at intervals of about 3 seconds.

When the ink is completely empty, you will see a message stating that printing is no longer possible, and the red indicator at the end of the empty ink tank will flash at 1 second intervals.

Replacing cartridges is quite simple. First, you need to move the printhead to a special service position on the carriage. How to do it? On some PIXMA models, you will need to send the command via the PC software or OSD. In other models, just lift the top cover or scanning module and lock them in a slightly open position.

After that, the print head will automatically move to a certain position and stop. the magic of automation.

How do you know which cartridge needs to be replaced? If in PIXMA printers, two cartridges are used. black and color. then the one you need is easy to recognize by marking.

In models where separate cartridges are used, the same fast blinking red light will help to find an empty one.

It is better to prepare a new cartridge in advance. To do this, simply unpack it according to the instructions and put it somewhere nearby. Then press the release lever on the empty cartridge and pull it up and toward you. a couple of light strokes, and the old cartridge is already in your hands. Now place a new cartridge on the vacant place and press it down with your finger, until it clicks. If the cartridge is functional and full, then a red light will light up on it.

If the light is off or blinking rapidly, it means the following: either the cartridge is defective, the function for detecting the remaining ink level is disabled, or the cartridge is not installed correctly. Take it out and reinsert it.

You may face a situation where the ink has run out not in one, but in several cartridges at once. When replacing, do not remove all of them at once, otherwise confusion may result. Well, if that happens, it doesn’t matter. Bright color markings on the cartridge and on the printhead will help you know where which belongs.

By the way, in the models of the PIXMA G series, the ink level is visible to the naked eye. right on the front of the case through transparent Windows. And ink is added in three movements. open the printer lid, open the lid of the built-in ink tank and fill the container. No manipulation of the print head is required here.

This video tutorial will help you fill in the ink correctly.

Well, the ink supply has been replenished, now you can close the lid. Just a few minutes for preparatory actions. the printer will do them itself. and you can continue working.