How to change password on iPad

Restoring a backup

Let’s make a reservation right away that this option is only possible if you have configured a backup of data from your device.

Copying data is possible in iCloud or iTunes. depending on which of these options you use, you will need to view the list of backups either in the Apple cloud service or in iTunes.

The task is to remember the moment at which you decided to put the password. You therefore need the latest backup before you implement password protection. You will have to roll back your device to this backup. accordingly, the data entered after setting the password will be lost.

To restore, you need to complete steps 1-4 from the first method, only do not create a new device further, but select the “Restore from backup” option, and then mark the corresponding backup file.

Recover password on iPad

Unfortunately, human memory is imperfect, and besides, it has been little studied by science. Therefore, a person sometimes forgets even fairly simple things. The situation in which the user has forgotten the password on the iPad is just one of those, since the password itself is a digital code, which, with constant use, is quite difficult to forget.

Nevertheless, if this did happen, then a way out of this situation can be found, the only question is. what losses will be incurred in this case.

In fact, iPad password recovery can be done in two ways. with complete loss of data on the iPad and without it, but with the possible loss of some recent data. There is also a third method, which does not entail any losses, but in most cases it will not work. Let’s consider each of these methods in more detail.

Reset iPad settings

The essence of this option is that we completely “reset” our device to factory settings. then the password is reset and you can use it again.

To do this, you need to do the following sequence of actions:

  • Turn off iPad.
  • Connect it to your computer via USB port.
  • Hold the power button for three seconds, then, while continuing to hold it, simultaneously hold down the “Home” button and hold it for about ten seconds, then release the power button, and continue to hold “home” for the same amount of time. The meaning of these actions is to transfer your device to the so-called DFU mode.
  • Launch iTunes, select your iPad in it and click on the “Restore” button.
  • In the window that appears, select the “new device” option.

After these steps, the iPad should be reset to factory settings.

Attention: all your data will be destroyed!

Remember all

Unfortunately, both the first and the second methods described above entail a certain loss of data. complete or partial.

If this is unacceptable for you, then you can try your luck with the method. still try to remember the password.

First, if you used it often, you might have retained the so-called muscle memory. If it does not work for you, then consciousness can block it. Try to work around it by applying the following trick: go to bed and set an alarm on your phone to remind you to turn on the iPad. When he wakes you up, it is possible that in the “automatic” mode your fingers will enter the desired code.

Secondly, most often the numbers that you specified as a password mean something. Try to think about what digital combination you might have used. Just remember that you will have only nine attempts, since on the tenth all data from your gadget will be destroyed.

Our service offers the purchase of computer, digital and video equipment from Apple on the most favorable terms

Get professional advice from a licensed Apple technician now

All rights reserved, for any copying of the material, a link to the site ¶¶¶ is required. Aggle Service Center is a post-warranty (unauthorized) service center. The information presented on the site is not a public offer.

  • iPhone
  • iPad
  • MacBook
  • iMac
  • Watch

Moscow, avenue Vernadsky, 39, office 425 in the business center “Vernadsky”

Apple products, trademarks and registered marks are the property of Apple Inc.

How to turn off Apple ID verification?

Open the Settings. iCloud menu and, when prompted, enter your account password. After creating a backup, the iOS device will no longer constantly inform you about the need to authorize or verify Apple ID.

How to turn off the password prompt when downloading the App Store?

open the “Settings” menu of your device; select the “Touch ID and Password” section; put the “iTunes Store, App Store” switch to the “on” position (if the option is already selected, do it again); enter the requested password from your Apple ID and confirm the entry with the “OK” button.

How to reset iPhone passcode without deleting data?

Remove iPhone 7 and iPhone 7 Plus Passcode

While holding the volume down button, connect your iPhone to your computer. Hold the volume down button until the recovery mode screen appears. If you have a backup of iPhone data, after removing the password, restore the data and settings.

What to do if you forgot your Screen Time passcode?

If you forget your Screen Time passcode, update your device to the latest iOS or iPadOS, then reset the passcode. If you are unable to update your device, erase the data on it and set it up as new to remove the passcode and select a new one.

How to remove a password prompt on an iPhone?

  • Open “Settings”.
  • Click [your name] and select “iTunes Store and App Store”.
  • Tap Password Settings.
  • In the In-App & Other Purchases area, tap the desired setting.
  • In the Free Downloads area, tap Request Password to enable or disable this setting.

How to remove a password from an iPad?

Remove Passcode on iPad with Home Button

  • Make sure iPad is not connected to your computer.
  • Press and hold the top button until the Shut Down slider appears.
  • If you backed up data stored on iPad, restore data and settings after deleting passcode.

How to set a password on an iPhone or iPad. guide

All Apple technology has high functionality that allows you to use the iPhone and iPad for work, entertainment, as well as to preserve and protect your personal information. And if everything is clear with the first two goals, then for the latter it is important to know how to put a password on an iPhone and make it as secure as possible.

How to install a fingerprint

Before you install your fingerprint for Touch ID on the device, you need to set a passcode and then follow a series of steps:

  • Check the Home button for dirt or moisture. Hands must also be clean and dry before installing the fingerprint.
  • Go to the menu. “Settings”. “Touch ID and passcode”, where to enter the existing code.
  • Find the “Add Fingerprint” command. While holding the iPhone in its usual position, place your finger on the Home button. The button itself should not be pressed. A few seconds after touching the button, a prompt will appear on the screen or a quick vibration will occur.
  • Repeated touches of the fingerprint scanner, slightly changing the position of the finger.
  • A screen will appear asking you to change the position of the phone in your hand. You should hold it as you usually do when unlocking it. In this case, the finger is applied to the button by the upper part of the pad, and not by its central part, as was required at the beginning of the scan.

Note! If scanning fails, you can try to repeat the procedure using another finger.

How to set a password on an iPhone

To hide the personal information on the phone from prying eyes, you need to put reliable protection on it. To do this, you need to perform several combinations:

  • Go to phone settings.
  • Find the “Password Protection” function and turn it on.
  • Next, a four-digit field appears. It must be filled in by coming up with a four-digit code.
  • Re-enter it to confirm.

How to protect information on your iPhone

It should be entered every time the phone unlock background appears.

For your information! IPhone functions allow you to configure the device in such a way that after 10 incorrect input attempts, all data from the phone will be erased. This method is good to protect personal information in case of loss or theft of your phone.

How to change password on iPad?

Password requirements on iPhone

As Apple takes the security of personal information and users’ personal information seriously, strict password requirements are imposed. So, a safe option should have the following features:

  • contain at least one uppercase letter (capitalized);
  • at least one digit;
  • do not repeat the account;
  • contain at least 8 characters;
  • not be the same with the old password;
  • do not have repeating characters in a row.
READ  How to connect magic mouse to ipad

Types of passwords to protect iPhone

If a four-digit combination seems too simple and unreliable protection, there are several more options.

How to reset iPad password if you forgot. 3 ways

The latest technologies are unwittingly being introduced into everyday life. Therefore, we are used to taking care of the security of our devices by downloading many programs for protecting personal data or using the already installed protection blocks (passwords, face recognition, fingerprint, etc.). The iPad is a versatile device that simplifies our lives, and information leaks are not welcome. If you are faced with the fact that you cannot unlock your device, we provide you with several options for how to restore iPad if you forgot your password.

How to Recover iPad Password via iTunes

In case of early synchronization of iPad with iTunes on the computer, for example, transferring music, video files, etc., you need to use your PC. However, if the sync is not done before the password is lost, all data on the iPad will be deleted.

And now, in fact, how to reset the password on the iPad:

Connect the device to your PC and enter iTunes.

Now make a forced restart of your device (simultaneously hold down the “Home” button and the side (or top) button). Then hold them until the recovery mode screen appears.

how to change your password on your ipod ipad iphone

Select the “restore” function. If this procedure takes more than 15 minutes, you will need to repeat all these steps from the beginning.

After recovery, you can set up your device and use it as usual.

If the iPad you are using has synced with iTunes before, you can easily get all your data back, even if you decide to erase all passwords and information on your iPad. Here are simple steps on how to erase iPad if you forgot your password:

Connect your device to the computer where you used to sync.

Launch iTunes on your PC. When prompted for a password, connect your iPad to the other person’s computer where you also synchronized.

Next, you must use the recovery mode.

Wait while iTunes syncs with your device and backs up.

When iTunes finishes this short-lived process, select Restore Device from the panel.

While the iPad recovery starts, iOS will open the setup window. Select “Recover from a copy”.

Now select your device in the PC utility. View the date it was created, as well as the size of a specific backup. Find the required file.

How to remove password from iPad via iCloud

The easiest choice is to manage the access code. apply method using iCloud to reset iPad. Find My iPad allows us to remotely restart the iPad. This “ability” was originally used to ensure that anyone who finds or stole your Apple tablet was not allowed to obtain any of your personal information. Naturally, for such an action you need to turn on My iPad. If you are unsure how to enable this app, follow this step-by-step guide to find your iPad listed:

Enter the site www.iCloud.com in your web browser.

change, password, ipad

Click on Find My iPhone. When the list appears, click on “All Devices” at the top and click on the iPad tablet icon.

When your device is selected, a window will appear in the upper left corner. In this window, you will notice three buttons “Play Sound”, “Lost Mode” (which locks the iPad) and “Erase iPad”.

Make sure the device name is above these buttons. this is your iPad and no other device.

Click the Erase iPad button and follow the instructions. He will ask you to confirm your choice. After that, the process of complete data clearing will begin.

Your iPad must be 100% charged and connected to the Internet. Otherwise it won’t work.

Your Apple ID password protects the privacy of your personal information stored in iCloud, such as your email address. Your passcode also protects your ability to locate or remotely wipe your device with Find My iPhone. You should change your password regularly to better protect your information.

Three ways to reset your iPad password if you forgot

How to unlock forgotten iPad password via Tenorshare 4ukey

Using Apple services is reliable because you follow the advice of Apple’s manufacturers. But such a system will not always provide you with such a desired and quick result. If you have already encountered the problem of unlocking your iPad, but did not like the lengthy process itself, we recommend that you download Tenorshare 4uKey, an equally safe option. This program is capable of deleting a forgotten password in one click, within a few minutes. But do not forget about the most important thing. all important information on the device will be destroyed after removing the password. Once you’ve been able to remove your iPad passcode, your next task is to set up your iPad in a new way, change your password, Touch ID, or Face ID. If you used iTunes or iCloud services and made copies there, you can easily restore all your personal data to iPad.

We provide you with a quick guide on how to reset the passcode on iPad:

Run the 4ukey program on your computer. Connect iPad to PC using USB cable and follow the instructions to put iPad into recovery mode.

When the program recognizes your device, press “Start” in order to delete erase passcode on iPad.

Then download the firmware package for the iOS program using the Internet.

When the firmware package is downloaded to your computer, click “Start Unlock” to resume the iPad, but without the passcode.

Once iPad is working again, the old passcode will be lost. You can now start setting up your device.

Thus, panic should not overwhelm you when you lose your personal data. Online services give you the opportunity not only to increase the amount of memory on your devices, but also to create an online storage of all the information you need.

Restrictions password recovery

This cipher is often used by parents, since its main purpose is to make certain functions of the tablet unavailable. If you are one of those users who have forgotten the iPad restrictions password, the following instructions will help you. But it is important to remember that this method can only be used on devices with a Jailbreak:

  • First, a recommendation for those who do not know how to turn on the iPad if they have forgotten the restrictions password. download the free iBackupBot app.
  • Connect your gadget to PC, launch iTunes.
  • Go to your device tab and find the “Create a copy now” option.
  • In iBackupBot, select your iPad on which you want to remove the old parental control code.
  • Double click on the com.Apple.springboard.plist file in the Preferences folder to open it for editing.
  • At the end of the document, before the closing tag, insert SBParentalControlsPIN 0000.
  • Save the file and close the utility.
  • Open iTunes and restore your device from the final, modified backup.
  • After resuming, go to “Settings”. “General”. “Restrictions”.
  • Enter the code four zeros.

Thus, we figured out how to find out the password for the iPad (restrictions). And after all the steps, you can set a new restriction cipher or disable them altogether.

These are the same tips to follow if someone on iPad 2 has forgotten their parental controls password.

Restore with iTunes

If the user has forgotten the password on the iPad, the following steps are followed:

  • Connect the gadget to the PC on which the synchronization was carried out.
  • Activate recovery mode.
  • Wait while the program syncs the device and copies the information.
  • After the completion of the process. “Restore”.
  • When the setup screen opens at the time of the procedure, click “Restore from a copy of iTunes”.

How to reset iPad passcode if you have access to it?

If you remember your iPad password, then you will not have to face a difficult time to perform iPad password reset. Apple provides a quick and easy way to reset iPad password through its settings. Before proceeding, you must remember that this will change your iPad password and you will not be able to access it with your existing passcode. Also, make sure you remember the new password yet you may need to take emergency steps to perform iPad password reset. To learn how to reset iPad password, follow these steps:

READ  How to enable auto-rotate on iPad

Open your iPad with an existing password and go to its setting.

Now go to General Click Passcode ID. In the old version of iOS, it will be listed as “Secret Lock Code”.

Provide an existing password and click on the “Change Password” button.

Enter a new password and confirm your choice.

You can also choose if you want an alphanumeric or numeric code from the PassCode options.

This will reset your iPad password from the newly submitted password or password. However, in case you do not remember the existing passcode of your iOS device, then you need to follow these three solutions.

change, password, ipad

Using iCloud

If your iOS device is set to Find iPad, you can try using iCloud for the resume process. So you forgot iPad lock password and don’t know what to do. In such a situation, you need:

  • Log in to the iCloud page from any other device or site.
  • When asked to sign in with your Apple ID.
  • Click the All Devices list that appears in the browser window.
  • Select the device to be eliminated.
  • Click “Erase” (the data on the gadget and its password are deleted).

After that, it will be possible to resume from the copy, or it will be possible to make a new setting.

These recommendations are also useful for those who do not know how to remove the password from iPad.

They are downloading

dr.fone. Unlock (iOS)

Unlock iPhone / iPad Lock Screen without Hassle.

  • Simple, clicks, process.
  • Unlock screen passwords from all iPhone and iPad.
  • No tech knowledge needed, everyone can’t handle it.
  • Fully compatible with the latest iPhone X, iPhone 8 (Plus) and iOS 11.

It is part of dr.fone toolkit and is already compatible with all leading versions of iOS. The desktop application is currently available for both Windows and Mac as well. You can learn how to reset iPad password using dr.fone. Unlock (iOS) by following these steps:

Launch dr.fone toolkit on your Windows or Mac and click on the “Unlock” option from the home screen.

Connect your iPad to the system, and click on the “Start” button as soon as your system has detected it.

As you connect your iPad to your computer, you get a “this computer” screensaver on your screen. Just close it by clicking on the cross button “x”.

In the next window, you should provide some basic information related to the device.

Click on the Download button to get the corresponding firmware. Wait for a while as it may take a few minutes to complete the download.

After the firmware has been downloaded, you will be automatically moved to the next window. Deselect “Hold native data” and click on the “Unlock Now” button.

When a warning message appears, enter the code shown on the screen to confirm your choice and click on the “Yes” button.

This will start the recovery process. Wait for a while and do not disconnect the iPad as it will be restored. After it is completed, you will receive the following hint.

Now, you can simply disconnect your device from your computer and use it without locking the screen.

dr.fone. Unlock (Android)

Remove lock screens from your Android devices, whether you remember the password or not.

Recovery mode

There are times when the user has never synchronized his device with iTunes and has not used the Find iPad utility. Then the answer to the question of how to activate the iPad if you forgot the password is somewhat more complicated.

In this case, enabling recovery mode will help you. It is clear that after activating it, all information on the gadget (and these are installed applications, email login data, photos, etc.), as well as the code installed on it, will be erased. We present the instructions, which will be useful for those who do not know what to do if they forgot the password on iPad mini or iPad Pro. It is necessary to perform a simple algorithm:

  • We connect the tablet to the PC and open iTunes.
  • We carry out a forced reboot:
  • simultaneously press and hold “Sleep / Wake up” and “Home” until the company logo appears;
  • continue to hold the keys until the recovery mode interface appears;
  • choose “Restore”.

After the above steps, the application should download the software for the device. Sometimes this procedure takes more than 15 minutes. After you finish the whole process, it will be possible to configure the gadget and use it as usual. By the way, these recommendations will be useful for those users who have forgotten the iPad 4 or iPad Air password.

How to Reset iPhone Passcode. Slow Internet

If you have a crawling internet, then the first iPhone password reset method won’t work for you. If the Internet on your computer is slow, then download somewhere a file with your firmware in the format. IPSW. You can download the firmware for your iPhone, iPad and iPod touch from the AppStudio firmware table on some high-speed network connection (ask a friend or in an Internet cafe).

We pulled our iPhone6,2_7.0.5_11B601_Restore.ipsw firmware file from iTunes. This firmware file was loaded by the program during the first firmware reset method described above. The firmware file is located in the following directory:

  • C: \ Documents and Settings \ username \ Application Data \ Apple Computer \ iTunes \ iPhone Software Updates

If you do not have iOS firmware, then download it. like this. We have the firmware. Now we take the firmware and, using a different computer with slow but working Internet access, try again to reset the password on the iPhone. Previously, this computer was also trusted by the iPhone.

To do this, we perform all the same actions as in the first method, but when you reach the 4th point, you need to press the Shift key on the keyboard and press the Restore iPhone button in iTunes. If you do it correctly, a window will appear in which you need to select the firmware manually, click OK and continue to reset the password.

As a result of the restoration, you will receive a clean iPhone, which will no longer ask you to enter a forgotten password. After recovery, you will be activated and you can use the phone.

Reset password on iPhone, iPad, or iPod touch

Friends, sometimes such a nuisance happens when an iPhone or iPad user forgets his password. Well, it doesn’t happen to anyone, complex, not associated with anything, the password can be forgotten by both a novice user and a more advanced one. If you, just like me, forgot your passcode for the iPhone (or other device), then let’s figure out what to do now and how to solve this problem and reset the password.

First, let’s figure out which passwords can be forgotten on our iPhone. If you do not have an iPhone, but an iPad or iPod, then everything looks about the same there. So in these devices we can forget the following passwords:

We figured out the restrictions password quite recently, this password to the restrictions settings can be reset without losing any information, for details on how to remove the restrictions password, see the article. “If you forgot the restrictions password in the iPhone or iPad”.

Today we will fight against the master password that is set on the iPhone lock screen, this password protects the contents of the entire phone. Although there are data security gaps on Apple’s side, if you are interested, you can take a look at the article. “Vulnerability in iOS 7.0”. Let’s not get away from the topic and proceed to consider resetting a forgotten lock screen password using the example of an iPhone with iOS 7.0.4. If you have a different firmware, then it should work too. Before resetting your password, try to guess the code anyway, the attempts to enter are of course limited, but if you read the instructions. “iPhone is disabled. Reset password counter “, then there may be more attempts.

Let’s take a look at two main ways to reset a forgotten iPhone passcode. Both of these methods are almost the same, the only difference is in the speed of your Internet. If the network access speed is good, then use the first method, in which iTunes will download the firmware itself and restore your iPhone, while resetting the lock password. If the Internet is slow, then use the second method, in which we use a pre-downloaded firmware. And most importantly, after the reset, all information is deleted from the iPhone, so make backups in advance, and after the reset you can restore the information.

READ  Ipad does not turn on lit apple

Reset lock password in iPhone. fast internet

Before you start resetting your iPhone password, make sure your computer is connected to a normal internet connection with good speed. Because during the reset, the firmware will be loaded, the volume of which is not at all small, for example, our firmware weighed 1.4 GB.

Turn off the iPhone 2. Plug the cable into the USB port of your computer and enter the iPhone into Recovery Mode. 3. As soon as the iTunes icon and the cable appear on the display, the recovery mode is running. We launch the iTunes program on the computer. When the program starts, it displays a message:

“ITunes found iPhone in recovery mode. You must restore this iPhone before using it with iTunes. “

We press the OK button and in iTunes select the button. Restore iPhone, we see a message that does not appear for everyone:

“Automatic check for iTunes and iPhone updates is turned off. Want iTunes to check for iPhone software updates? To turn on automatic checking for updates, go to the General panel in iTunes preferences and select “Check for software updates automatically.”

We press the button. Check, since the Cancel button does not lead to anything.

Are you sure you want to factory reset your iPhone? All your media and other data will be erased and the new version of iPhone software will be installed. iTunes will verify this recovery with Apple. After completing the process, you will be given the option to restore contacts, calendars, SMS messages and other settings.

Click. Restore and Update. The following is information about the version of iOS that will be installed. Select. Next and agree with the text of the license agreement with the button. I Accept.

At the top of iTunes, we see that 1 item is being downloaded, apparently it is downloading the firmware. The firmware was loaded into iTunes for two hours. During this time, the iPhone woke up, I had to perform all the actions first.

I repeat everything from the very beginning, turn off the iPhone, put it into recovery mode. iTunes is extracting software and suddenly error 3004 appears:

“Failed to restore iPhone. An unknown error has occurred (3004). “

I read a cure for this error on the Internet. make Internet Explorer the default browser or try manual recovery (with a preloaded IPSW). So I did close all browsers and made Internet Explorer the default. I repeated the reset steps again, the error did not appear anymore.

The lace with the iTunes logo disappeared from the iPhone screen and an apple appeared with the firmware recovery process. As a result, the iPhone successfully recovered, booted up and asked for activation, during which we chose. Set up iPhone as new. During the activation process, it was again offered to set a password, but we refused by clicking below. Do not add a password.

Well, all the password has been reset, the iPhone does not ask for it anymore. Read below about restoring your information from a backup.

Features of iPhone password reset and information recovery

I hope you understand. how to reset the password on your iPhone if it has been forgotten. During the reset, you may stumble upon iTunes errors. This is normal, it happens. Look for the error code on the Internet and read what people are doing, you can write about your experience in the Комментарии и мнения владельцев. If errors do not appear, but your iPhone or iPad does not want to reset the password in Recovery Mode, then you can try to perform the same actions, only immersing the iPhone in DFU mode.

We put the password on the iPad tablet

It is very easy to put a password on iPad, the activation is performed in the settings.

Launch the “Settings” application, select the “Password” section and press the button. “Enable password”. After completing these steps, the iPad will prompt you to enter the 4-digit password you have invented and confirm it again.

Now, when you try to unlock your tablet, the iPad will ask you to enter your password. You won’t be able to use the device without entering the password, unless you launch the Camera application by pulling the camera icon up. Also, in locked mode, without entering a password, on an iPad with iOS 7 and higher firmware, you can use the Control Center, unless, of course, it is prohibited in the settings.

If, after enabling the password, you try to enter Settings. Password, then you will also be asked to enter the lock code, so do not forget your password or write it down somewhere, if you forget, look.

We put the password on the Apple iPad tablet

If you own an iPad tablet, no matter what generation, it can be light. Air, small. Mini, or heavy iPad 1st generation, then know that on any of these models you can put a security password that restricts access to the contents of the tablet. which is sometimes just necessary.

You can put a password on the iPad for various reasons, for example, the tablet contains valuable files that cannot be lost in any way, or you simply do not want someone to watch your photos, play your game, etc. Sometimes parents set a password in order to restrict the child from using the iPad constantly. In general, everyone here has their own protective needs.

Earlier we looked at how to put a password on an iPhone; in an iPad tablet, all actions are performed in almost the same way. Today we will touch upon some of the password features that were not considered using the phone as an example. We will put a password on the iPad, change it to a more secure one, and turn off the passcode completely.

How to change the security password on iPad

If you decide to change the password on your iPad, then it’s easy to do this, of course, provided that you remember your current password.

If you know and remember your password and want to change it to some new 4 digits, then go to Settings. Password. enter the real password. click the “Change password” button. enter the old password. then enter and confirm the new one.

But we decided to change our 4-digit digital password to a more complex one that uses not only numbers. We want our password to contain letters, symbols and not be limited to 4 characters, it turned out that you can make such a password in the iPad, for this we turn off the toggle switch. “Simple password”.

We enter our four-digit code, created in the first section of the instructions, and the iPad issues a new form for our new password. Our new, not simple password is entered from a full-fledged virtual keyboard, where any layout and length can be applied.

Now, when you try to wake up your iPad from hibernation by unlocking, you will see a completely different password entry form. As for me, a simple digital form somehow fits more into the design of an iPad tablet, although when it comes to data protection, the appearance probably fades into the background.

How to remove a password on an iPad

In order to remove the password, i.e. disable the code protection in the iPad on the lock screen, you need to go to Settings. Password. Turn off the password, then you need to enter your code and the protection will be disabled.

If you have forgotten the iPad screen lock password, you will not be able to view it in the tablet, and there is also no magic factory password. In this case, you can either remember or reset the password, and the following instructions will help you with this, which you need to read carefully:

These two workers, but sometimes they may not help, for example, you found an iPhone or iPad with a password that blocks access to the work screen, by applying the reset instructions, you can sometimes get a “brick” that will ask for activation when using an Apple ID and password. This happens when the “Find iPhone (iPad)” function is enabled on the device, so it is better to return the found device to the owner, rather than trying to remove the password.!

NNCXV.INFO 2021