How to change the ringtone on iPhone

“Health

The Health app can be used, among other things, to set a sleep schedule, track sleep quality, and perform a variety of other tasks. You can change the melody set to the built-in alarm clock as follows:

    Run the application and go to the “View” tab.

change, ringtone, iphone

Scroll down the list of sections presented in it and open “Sleep”.

Next, go to the block of options “Alarm settings” and tap on the item “Sounds, tactile signals”.

Select your preferred ringtone from the list of available ones and save your changes. Unfortunately, only standard audio signals are presented here.

“Clock

If you use the same-named component of the Clock application preinstalled on all iPhones as an alarm clock, do the following to change the ringtone:

    Open the “Clock” application, go to the “Alarm” tab and tap the inscription “Edit” located in the upper left corner.

Further, depending on the record for which you want to change the sound signal, tap on the “Change” button in the “Sleep | Awakening “or time in the list” Others “.

Then you can go along one of two paths:

    Select your preferred ringtone from the list of standard.

  • Scroll up the page with sounds to the “Song selection” block and tap one of the “Playlists”, “Artists”, “Albums”, “Songs”, then find your preferred song in your Apple Music library and select it by setting this way as a signal to wake up.
  • From now on, your chosen melody will be used as an alarm signal. If you have several of them installed (for example, for different days or times), repeat the steps from the instructions above for them.

    Third party applications

    If you prefer to use one of the many third-party applications available for installation from App Store as an alarm clock, to solve the task sounded in the title of the article, you will need to perform slightly different steps from the ones discussed above. However, in most cases, the algorithm is quite similar, so we will use one mobile program from a third-party developer as an example.

      Launch the app and go to the list of alarms set with it.

    Find the one for which you want to change the melody and go to editing it (most often this is done by touching the entry itself or by selecting an item like “Edit”, “Change”, “Edit” or a small icon with a pencil image).

    In the list of available parameters, find the one that will be labeled “Sound”, “Melody”, “Signal” or something close in meaning, and tap on it.

    Next, either the window for selecting sound signals will immediately open, or, as in our example, you will need to perform one more step.

    Once in the desired section of the application, select the appropriate melody from the list of available by default, or, if there is such an opportunity, use the “Add Music” item or similar, provide access to the “Apple Music” library, then find and select the music composition that you want to use as a wake-up signal.

    If necessary, save the changes made to confirm the installation of your own melody for the alarm clock. How to set an alarm in a third-party app on iPhone

    How to change the alarm ringtone on iPhone

    Alarm clock is one of the most demanded functions of a smartphone. The iPhone also has this feature and is located in the Clock app. But when setting up an alarm clock on the iPhone, many users are faced with the fact that they cannot change its ringtone and they have to use one of the standard sounds.

    If you also have a similar problem, then we suggest that you familiarize yourself with this material. Here’s how to change your alarm ringtone on iPhone 4, 4s, 5, 5s, 6, 6s, 7, 8 and iPhone X.

    In order to change the alarm melody on the iPhone, you need to open the “Clock” application, go to the “Alarm” tab and click on the “Change” button located at the top of the screen.

    Next, you need to select the alarm clock, the melody of which you want to change. To do this, click on the arrow on the right side of the screen.

    After that, a screen with alarm settings will open in front of you. Here you can set the snooze for the alarm clock, change its name, and also change the melody used by the alarm clock. In order to change the melody, click on the “Sound” section.

    As a result, you will be taken to the “Sound” section, where you can select a melody for the alarm clock. There are two options available here, you can choose a melody from either songs or ringtones. Naturally, for this to work, these songs or ringtones must be pre-loaded on the iPhone. You can find out how this is done at the end of the article.

    In order to select one of the songs as a melody, go to the “Select a song” section.

    Then go to “Artists”, “Albums”, “Songs” or “Genres”.

    After choosing a suitable melody, you need to save the settings. To do this, by clicking on the “Back” button, and then on the “Save” button.

    If you want to choose a melody not from songs, but from ringtones, then it’s still easier. In the “Sound” section you need to scroll down the page and select one of the ringtones.

    Next, you need to save the selected ringtone as a melody for the alarm clock. To do this, click on the “Back” button, and then on the “Save” button.

    How to Download Alarm Ringtones on iPhone

    The instructions above assume that you already have some kind of music or ringtones on your iPhone that you can use as an alarm ringtone. But, if you have not downloaded anything of this kind to your iPhone before, then this must be done before changing the alarm melody, otherwise nothing will work.

    So, in order to download songs to the iPhone, you will need a computer with iTunes installed and a cable to connect the iPhone to the computer. To get started, launch iTunes, open the File menu, select Add Folder to Library, and select the folder with the music you want to download to your iPhone.

    After the selected music is loaded into iTunes, connect the iPhone using a cable and click on the device icon that appears in the upper left corner of the iTunes window.

    This will take you to your iPhone’s settings. Here you need to go to the “Music” section, turn on the synchronization of music and click on the “Finish” button.

    Then you need to wait until the synchronization process is over, after which you can start setting up the alarm ringtone on the iPhone. If something remains unclear, then check out our article on transferring music from computer to iPhone. There is also an article on the site about creating ringtones and downloading them to iPhone.

    Add your own ringtone using iTunes

    The arrangement of items in the iTunes program may vary depending on its version, but the instructions are still relevant. It doesn’t matter what kind of iPhone you use, it can be either 4S or 7 Plus. the process of creating a ringtone is absolutely identical. So let’s get started:

    Do not look at the fact that there are too many points in this manual. there is really nothing complicated. We have broken it down into the most detailed parts so that you don’t have any problems and questions.

    Users who bought an iPhone for the first time often cannot figure out how to put their own melody on the ringtone. The fact is that there are some restrictions on the iPhone that apply to ringtones. For example, they must be saved in M4R format, and their duration must not exceed 40 seconds.

    In this article, you will learn how to create a suitable ringtone for iPhone and how to put it on a call. The article will be useful for users of all modern iPhone models, including iPhone 4, 4s, 5, 5s, 6, 6s, 7, 8 and iPhone X.

    Ringtone types

    The first type is monophonic, that is, the mobile phone plays a set of notes and at the same time sounds no more than one note at a time.

    READ  How to Reset Passcode on iPhone 7

    The second type is polyphonic ringtones, that is, the gadget plays several notes at the same time. The representative of the format of such a ringtone is MIDI.

    The third type. real tone. when music previously recorded in digital format sounds. This type of ringtone is characterized by such formats as AAC, WMA, Ogg, MP3, etc. The third type of ringtone is characteristic of the iPhone 4S mobile phone.

    How to download ringtone on iPhone 4s: instruction

    Every gadget owner strives to make it a more modern and non-repetitive accessory. One way to achieve this is by installing various new ringtones.

    There are several ways to download ringtone.

    • The first way: through iTunes;
    • Method two: online, or over the Internet.

    When downloading a ringtone for a mobile phone, one should not forget that ringtone for iPhone 4S should only have “m4r” format and the length of the ringtone music track should not exceed 30 seconds.

    You have already understood what are the restrictions when downloading ringtones, now let’s proceed to download the ringtone for the gadget itself.

    We will download the ringtone for iPhone 4S via iTunes. First you need to launch iTunes.

    Then you need to add the original file, which in the future will turn into a mobile phone ringtone in iTunes. To achieve this, in the “File” menu, select “Add file to library” and open the source. Then the file will appear in the main window of the program.

    Right-click on the name of the source and in the menu that appears, select “Details”.

    Then, in the file information window that opened after clicking the mouse button, you need to go to the “Options” tab.

    In the line the stop time you need to enter 0:30 (ringtone duration) and press the Ok button.

    Then you need to click on the right mouse button again and select “Create version in AAC format”. In the iTunes window, you will see another file with the same name as the original and 30 seconds long.

    Then, after the described manipulations, you need to call the context menu by clicking on the file name for 30 seconds. Then select “Show in Windows Explorer”.

    If there is a check mark next to “Hide extensions for registered file types”, then file extensions in Windows Explorer will not be indicated and it will not be possible to change the extension.

    In order to be able to change the extension, you must uncheck the box next to “Hide extensions for registered file types”. To accomplish this task, you first need to click on “View” in the “Folder options” section, go down the list to the “Additional options” label and uncheck the box and, be sure, do not forget to click “Apply”.

    Now it remains only to add it to the library by pressing the “CtrlO” keyboard shortcut and it will appear in iTunes in the “Sounds” section.

    Now you have the opportunity to set your favorite ringtone as a ringtone.

    How to Ring a Song on iPhone (iTunes 12.7 and Newer) on PC

    In order to be able to create and download ringtones through iTunes, one parameter of the system settings needs to be changed in Windows. Go to “Start” → “Control Panel” → “Folder Options” (“Folder Options”), go to the “View

    Open iTunes and select the song you want to create a ringtone from (or add a song by clicking File → Add File to Library). Listen to the song and record the start and end times of the segment you would like to hear as a ringtone. Maximum ringtone length 40 seconds.

    Right-click on a song and select Song Info. Then go to the “Parameters” tab and specify the desired start and end time of the call (the sound file itself will not be cut off). After the end of the interval selection, click “OK”.

    Note that after setting the marks of the beginning and end of your future ringtone, it is recommended to listen to the song and, if necessary, make changes to the length of the segment.

    File “→” Convert “→” Create AAC Version “.

    You will see another copy of the future ringtone, the creation of which will be accompanied by a sound notification.

    The selected file must be renamed to the m4r extension (iPhone ringtone format).

    Connect iPhone to computer using USB cable and select smartphone in iTunes window.

    In the column “On my device” select the section “Sounds Done”.

    Settings “→” Sounds “. After completing the procedure, be sure to remove the start and end times of the original melody. Just uncheck the boxes that were set in point 3.

    How to Create iPhone Ringtone via iTunes

    As mentioned above, iPhone ringtone must be in M4R format, regular MP3 files or music in other formats will not work. Therefore, in order to use an existing song as a ringtone, you must first prepare it. You can do this in different ways, first we will tell you how it is done using iTunes.

    To begin with, the song that you want to put on the ringtone must be in your iTunes library. If it is already there, then everything is fine, you can start preparing the ringtone. If not, please upload it to your library first. To do this, open the “Music” section in iTunes and drag the files you need into it, or use the “File. Add File to Library” menu. You can read more about how to upload music to your iTunes library.

    After the composition has been added to the library, you need to right-click on it and select the option “Song Information”.

    This will open a window with information about the selected song. Here, on the Options tab, you can trim the song. To do this, enable the “Start” and “End” options and specify the time that will serve as the beginning and end of your ringtone. The time span must be selected so that it does not exceed 40 seconds, otherwise the iPhone will not be able to recognize it as a ringtone. After trimming, do not forget to click on the “Ok” button.

    After that, we return to the iTunes library and again select the file that should become a ringtone for the iPhone. At the same time, we do not pay attention to the fact that after trimming, the duration of the composition has not changed, it should be so. Having selected the file, open the “File” menu and select “Convert. Create version in AAC format” (in some versions of iTunes this menu is called “Convert. Create version in AAC”).

    As a result, a copy of it will appear next to the original composition in the media library. In this case, the duration of the new file will already be the same as we indicated earlier.

    Now you need to right-click on the cropped version of the composition and select “Show in Windows Explorer”.

    This will open the folder containing the trimmed version of the composition. In this case, this file will have the extension m4a. In order to be able to use it as a ringtone for the iPhone, its extension must be changed to m4r or, more simply, renamed so that at the end of the file there is m4r, not m4a.

    If your file extensions are not displayed, then you need to change the settings of Windows Explorer. To do this, open the Start menu and enter the search query “Folder Options” if you have Windows 7 or the query “Explorer Options” if you have Windows 10.

    In the Explorer settings, go to the “View” tab, disable the “Hide extensions” option and save the settings by clicking on the “OK” button. After that, you can change the extension of the ringtone from m4r to m4a.

    After changing the extension, the ringtone is ready, it can be loaded into the iPhone’s memory. How this is done will be described at the end of the article. In the meantime, an alternative way to create ringtones, without using iTunes and without renaming files.

    READ  How to connect headphones to iPhone 7

    How to Create iPhone Ringtone Without iTunes

    If you can’t figure out how to create a ringtone described above, then you can go the other way. Ringtone for iPhone can be created with an online converter.

    To do this, go to the site mp3cut.ru and click on the button “Open file”.

    This will open a window for selecting a file. Here you need to select a song for the ringtone and click on the “Open” button.

    After that, the composition you have selected will open in the mp3cut.ru interface. At this stage, you need to trim the composition so that you get a ringtone no more than 40 seconds long. To do this, place blue marks at the beginning and end of the segment that should become a ringtone.

    Then activate the “Ringtone for iPhone” option. Thus, you tell the site that you want to receive the ringtone in the m4r format.

    Now, in order to get the finished ringtone, click on the “Trim” button.

    At the end, you just need to click on the “Download” button and download the ready-to-use iPhone ringtone to your computer.

    How to set an iPhone ringtone

    So that every time you hear a familiar melody, you do not need to grab your with your phone, you need to download the ringtone to your iPhone. You can make the desired call yourself from musical compositions.mp3. Or by downloading a ready-made file from the Internet.

    The iphone ringtone must be in.m4r format. a special format for ringtones, and the length of the composition does not exceed 40 seconds.

    How to put music on iPhone ringtone? The procedure is as follows:

    • Select and upload the file of the desired ringtone to iTunes.
    • Reduce the duration of a piece of music to 40 seconds.
    • Convert file to AAC format.
    • Download the file of the finished ringtone to iPhone by syncing with iTunes.
    • Place a call on iPhone.

    Now let’s take a closer look at how to set a ringtone on an iPhone.

    How to set an iPhone ringtone

    To put your finished music on your iphone, open the Settings app on your phone. Click “Sounds” in the next “Ringtone” window. A list of ringtones installed on your phone will appear. The one you create will be the very first. Click on it, a check mark will appear on the right. Thus, you were able to change the melody on the iPhone by setting your music instead of “Marimba”.

    How to set ANY Song as iPhone Ringtone (Free and No Computer)!

    Besides, you can put music on iphone ringtone for each contact. To do this, open Contacts in the phone application, select the subscriber whose call should be different from the others, click Change. Scroll down to the Ringtone field to set iPhone ringtone. The number of contacts with unique ringtones is also unlimited.

    You can place a call on iphone 4, iphone 5, iphone 6 using the same principle. The difference may only be in the iTunes version, but the procedure is the same everywhere.

    After that, you will not confuse the sound of your phone with anyone else, and you will recognize calls from especially important persons from the very first second.

    Sync iPhone with iTunes

    If your iPhone is not already connected to your computer, connect it using a USB cable. Click on the device icon in the top bar of iTunes.

    Select Sounds in the left pane. In the right window, check the “Synchronize sounds” checkbox. By default, all ringtones in iTunes will sync to iPhone. Then synchronize the device by clicking the “Finish” button.

    After synchronizing the phone, you can set the iphone ringtone and assign it to any contacts from the phone book.

    Convert to ringtone format

    First select the file. Then open the File menu. It contains the item “Convert” and then “Create version in AAC format”

    The conversion of the file will begin, as a result of which a file with the same name, but of a shorter duration will appear below.

    How to Set ANY Song as RINGTONE on iPhone (No Computer)

    Right-click on this new file and select “Show in Windows Explorer” from the drop-down menu.

    An explorer window will open. Here you need to change the file extension from m4a to m4r. That is, change the last letter “a” to “r”. (If your extensions are not shown, then select in the explorer “Tools. Folder Properties. View. and uncheck the menu” Hide extensions for registered file types “). You can immediately copy the resulting file to another folder where you can easily find it.

    Now without closing the explorer window, return to the iTunes window and go to the “Sounds” section. To do this, click on the “.” Icon and in the drop-down list select “Sounds”.

    Return to the explorer window and drag the ringtone file with the mouse to the iTunes window. (You can do it through the “File” item. By default, the converted files are in the C: \ username \ My Music \ iTunes folder). The file should appear in the list of ringtones.

    Video instruction on how to add ringtone to iPhone. All of the above actions in a short video.

    Limiting the length of the melody

    Now you need to reduce the length of the piece of music to 40 seconds, otherwise you will not be able to put music on the iPhone call.
    This can be done using online services or special programs on the smartphone itself.
    Here’s a look at how it’s done in iTunes.

    Right-click on the name of the music file. In the drop-down menu, select “Details”.

    The file properties window will open. Click the Options tab. Here, in the “start” and “end” fields, you need to specify the fragment of the recording that you want to cut out of the entire piece of music.

    Fragment duration should not exceed 40 seconds.

    After setting the time interval, click “OK”.

    Now you need to convert the file to ringtone format and put the song on a call.

    Uploading a ringtone file to iTunes

    Instructions on how to put a melody on an iPhone via iTunes are described in detail in the article “How to upload music to an iphone”.

    Open the iTunes program (you can download it for free from the official website Apple.com/ru/iTunes/download).

    Go to the “Music” section by clicking on the note icon in the upper left corner.

    Click on the “File” item and in the pop-up menu that appears, select “Add File to Library”.

    The uploaded file will be displayed in the library.

    How to Ring a Song on iPhone (iTunes 12.7 and Newer) on PC

    In order to be able to create and download ringtones through iTunes, one parameter of the system settings needs to be changed in Windows. Go to “Start” → “Control Panel” → “Folder Options” (“Folder Options”), go to the “View” tab and uncheck the box next to “Hide extensions for registered file types”. This will be needed to rename the ringtone we are creating.

    Open iTunes and select the song you want to create a ringtone from (or add a song by clicking File → Add File to Library). Listen to the song and record the start and end times of the segment you would like to hear as a ringtone. Maximum ringtone length 40 seconds.

    Advice! You can also trim a song for iPhone ringtone in an easier way, which is described in detail in this manual. If you use an alternative method, then after that you can immediately go to step 8.

    Right-click on a song and select Song Info. Then go to the “Parameters” tab and specify the desired start and end time of the call (the sound file itself will not be cut off). After the end of the interval selection, click “OK”.

    Note that after setting the marks of the beginning and end of your future ringtone, it is recommended to listen to the song and, if necessary, make changes to the length of the segment.

    Right click on the song of your choice and select “File” → “Convert” → “Create AAC Version”.

    READ  How to set parental controls on a child's iPhone

    You will see another copy of the future ringtone, the creation of which will be accompanied by a sound notification.

    Right click on the new song and select “Show in Windows Explorer”.

    The selected file must be renamed to the m4r extension (iPhone ringtone format).

    Connect iPhone to computer using USB cable and select smartphone in iTunes window.

    In the On My Device column, select the Sounds section. Drag the ringtone you created (.m4r file) to the list of ringtones available on iPhone and click “Done”.

    After that, the ringtone will be available on your iPhone under “Settings” → “Sounds”. After completing the procedure, be sure to remove the start and end times of the original melody. Just uncheck the boxes that were set in point 3.

    How to Ring a Song on an iPhone (iTunes 12.6 and Older)

    The first step is to make certain settings. Go to “Start” → “Control Panel” → “Folder Options” (“Folder Options”), go to the “View” tab and uncheck the box next to “Hide extensions for registered file types”. This will be needed to rename the ringtone we are creating.

    Open iTunes and add a song by clicking File → Add File to Library. Listen to the song and the section from it that you would like to hear as a ringtone. The maximum length of the track being played is 40 seconds.
    Right-click on the song and select Details. Go to the “Parameters” tab and specify the desired start and end time of the call (the sound file itself will not be cut off). After the end of the interval selection, click “OK”.

    Right click on the song of your choice and select Create AAC Version. You will see another copy of the future ringtone.

    Right click on the new song and select Show in Windows Explorer. The selected file must be renamed to the m4r extension (iPhone ringtone format).

    Drag the ringtone into iTunes (or add the usual “File” → “Add file to library”). it will appear in a new category “Sounds”, which will contain all ringtones.

    Synchronize iPhone with computer. After the synchronization is complete, the ringtone can be found by going to “Settings” → “Sounds” → “Ringtone”.

    After completing the procedure, be sure to remove the start and end times of the original melody. Just uncheck the boxes that were set in point 3.

    How to put a song on a call on an iPhone?

    Setting a ringtone on an iPhone is not an easy task and it is very strange. It would seem that such a friendly system as iOS should include a simple tool for this operation, but in reality this is not at all the case. However, there is a way out and today we will tell you how to install a song on your iPhone using just iTunes.

    How to Ring a Song on iPhone on Mac (iTunes 12.7 and Newer)

    Launch iTunes and select the song you want to make a ringtone from. Right-click on it and select “Song Details”.

    In the window that opens, select the “Options” tab, check the boxes next to the “Beginning” and “End” items, specify the segment of the beginning and end of the ringtone you are creating and click “OK”. Before performing this action, of course, it is recommended to listen to the song and write down the start and end times of the segment in advance, which will become your future ringtone.

    In iTunes, select File → Convert → Create AAC Version. Immediately after that, a new song will appear in your library, shortened to the specified segment.

    Right click on the created song and select “Show in Finder”.

    In the window that opens with your future ringtone, right-click on it, click “Rename” and change the file extension from m4a to m4r (iPhone ringtone format).

    Connect iPhone to Mac with USB cable and select smartphone in iTunes window.

    In the On My Device column, select the Sounds section. Drag the ringtone you created (.m4r file) to the list of ringtones available on iPhone and click “Done”.

    After that, the ringtone will be available on your iPhone under “Settings” → “Sounds”. After completing the procedure, be sure to remove the start and end times of the original melody. Just uncheck the boxes that were set in point 2.

    Please rate 5 stars at the bottom of the article if you like this topic. Subscribe to us Telegram. In contact with. Instagram YouTube.

    How to change iPhone alarm ringtone and volume. Repair in St. Petersburg

    If you have a phone, then you probably start an electronic alarm clock on it. A simple procedure, but for some iPhone owners, it has a number of unclear points. The most common questions are how to change the ringtone and adjust the volume of the alarm clock on the iPhone so that it does not frighten in the morning?

    Diagnostics FREE.
    7 (812) 953-94-11, 7 (921) 984-75-12 (Kamennoostrovsky prospect, 42, Petrogradskaya metro station)

    IPhone Alarm Ringtone Replacement

    The ability to change the alarm melody appeared only with the release of iOS 6. Until that moment, users had to put up with the small selection of standard melodies that quickly became boring. In all subsequent versions of iOS, the ability to replace the sound has been preserved, so you can safely set your favorite song on the alarm.

    • Open the Clock app and go to the Alarm tab.
    • Click “Change”.
  • Set time, frequency and label.
  • Open the “Sound” section. here you can choose a melody.
  • In the Songs field, click Select Song.
  • Select the song you want from your smartphone’s music library.
  • Make sure the selected song is set to alarm. Its name should be in the “Sound” field. If everything is correct, click “Save”.
  • If you are using the paid iTunes Match service, which allows you to store all your music in iCloud, then you will have the additional opportunity to select a song from the cloud storage. But you should not do this: if there is no Internet connection, the alarm will not ring, since the selected melody will become unavailable. Therefore, select songs that are stored in the memory of your smartphone.

    Free consultation! Free diagnostics! Warranty for work!

    Select a partition: td Apple products

    Repair iPhoneiPad repairiPod repairMacBook repairiMac repairDr. Apple products

    We can fix all Apple equipment ☎ 7 (812) 953-94-11

    Adjusting the iPhone alarm volume

    Another popular question among novice iSO users is where to change the alarm volume so as not to jump from surprise in the morning.

    • Open the “Settings” application and go to the “Sounds” submenu.
    • You need a section “Call and Alerts”, where you can set the appropriate volume level.

    To check, set the alarm so that it rings in a minute. Adjust the volume and check if you hear a melody. In the same section of settings there is a parameter “Change with buttons”. Turning it on will cause the alarm volume to be adjusted in the same way as system sounds. with the volume rocker.

    Such a bundle has one significant drawback: if you put your smartphone on silent mode, the alarm will not ring either. Therefore, be careful with the settings, otherwise you will have to figure out why you overslept.