How to connect a browser printer to Wi-Fi

Connecting via the connection setup wizard

To connect the printer via WI-FI, you can use the connection wizard built into the OS. Please note, however, that the printer is wireless and has WPA or WEP. Only in this case can you find answers to the question of how to connect a printer to a laptop and how to set up a printer. To do this, you will need to know the name of the network, i.e. SSID and password for it.

To be able to connect to the network via Wi-Fi, you will need to press the “Settings” button on the control panel of the printing device and select “Network” in the window that appears. After that, the wizard responsible for connecting the device will automatically search for all wireless networks that are currently available, after which it will give a list of them.

Then, among the list presented, you will need to find and select the required Wi-Fi network. If it does not appear in the presented list, in this case, enter the name in manual mode.

At the end, the installation wizard will ask you to enter your network password. Please note that you need to enter the network name and password, taking into account the case, otherwise you may encounter a connection error. This completes the procedure for connecting the device to the laptop via WI-FI, as a result of which you will receive a network-connected and fully configured printing device.

Normal connection

  • Now select “Setup Wizard”. The printer will start searching for all nearby wireless networks. Use the arrows to select your own and click “OK”;
  • Next, it remains to enter the password from Wi-Fi. If your router has WPS enabled, the menu will display “WPS available”. Just select this item, and then go to the router and click on the WPS button on the Internet center.

Making a connection via WPS

In order to solve the problem of how to connect a printer via a WI-FI router, use WPS technology, but for this both devices must have its support. In general, most modern models meet this parameter. However, it would be nice to check this, just in case, by studying the instructions that came with the printing device for this purpose.

In addition, pay attention to the bottom of the router itself, where you should find the icon of the above technology and the PIN code. You will definitely need the latter when making a connection on a printer.

If there is no shortcut at the bottom, in this case, you will have to open the web interface to make sure that WPS support is available, otherwise it will not be possible to configure the printer via a WI-FI router. To do this, you need to drive or into the address bar of your web browser. To successfully configure the printer using WPS, you must set the switch of this technology to the “Enabled” position. In addition, find the line “Device PIN” and enter the device PIN there.

In addition, you will need to make sure that WPA / WPA2 security is in place to set up the wireless network. WEP security is not suitable for this purpose. In addition, find MAC filtering in the router settings, which must be disabled. Please note that some models of printing devices have a dedicated button to enable WPS. If it is present, then be sure to press it and hold it until the wireless network is found from the side of the device.

Next, in the list of devices connected to the PC (category “Printers and Faxes), you need to select the desired device and open its context menu. After that, click on the item that assumes the use of the default printer. If everything is done correctly, a green round icon with a white checkmark will appear on the device icon. Thus, the problem related to how to connect to the printer via WI-FI has been resolved. Otherwise, try the next method, which also allows you to connect your printer to your computer via Wi-Fi.

How to connect a mfp browser via Wi-Fi

Good day! In the article today we will configure and connect to WI-FI on the Brother DCP 1612WR printer. The problem with these settings and connections is that the user manual is written in the most difficult way for the average user. I’ll tell you honestly, and it was difficult for me to figure it out myself, since very often a simple instruction is simply stretched and written more difficult than it is.

First of all, you need to already have a working router. Be sure to take and remember the password for your Wi-Fi network. If you have forgotten your password, then you are welcome to this article. If the password cannot be found, then you can connect using WPS. if there is such a button on your router.

You can also directly connect to your laptop, turning it into a regular hotspot. Therefore, we have a separate article here. There is nothing complicated, just start the hotspot or access point mode.

Using WPS or AOSS

  • If the router has a WPS button, then you can connect without knowing the password. Choose “WPS / AOSS”;
  • Next, the message “On. wireless network? ” choose “yes”;
  • After that, you will be asked to click on “WPS” at the router. go to the router, find this button and click on it. After that, in the menu, select “OK”.

Setting up with a disk

The box from under the device should contain a disk for installing all the drivers, it is best to use it, since in addition to connecting, everything you need will be installed on your computer. Next, you need to take a USB cable and connect to the printer using it.

and more models of printing devices use not only a standard wired method as a connection, but also a wireless version of integration into work. After all, the installation of Wi-Fi on the MFP allows you to more effectively use its capabilities by all employees of your office. In order to solve the question of how to connect the MFP to Wi-Fi, you need to do the following steps.

Connect the device to your wireless network:

Next, go to your computer to further configure the printer:

  • go through “Start” in the “Devices and Printers” menu;
  • then click at the top in the “Add Printer” panel;
  • in the window that appears, select “Add a network, wireless or Bluetooth printer”;
  • After that, the computer will make a list of available devices, in which you will select the option you need. Press “Next”;
  • the installation of the necessary drivers will occur after that;
  • then a message will appear about the successful installation of the printing device;
  • here you can set your default printer and print a test page.

It doesn’t take long to set up your printer and you can start enjoying all the benefits of a Wi-Fi connection very quickly.

and more models of printing devices use not only a standard wired method as a connection, but also a wireless version of integration into work. After all, the installation of Wi-Fi on the MFP allows you to more effectively use its capabilities by all employees of your office. In order to solve the question of how to connect the MFP to Wi-Fi, you need to do the following steps.

Connect the device to your wireless network:

  • tap on the menu screen “Wi-Fi Settings”;
  • further “Wi-Fi network status”.

Next, go to your computer to further configure the printer:

  • go through “Start” in the “Devices and Printers” menu;
  • then click at the top in the “Add Printer” panel;
  • in the window that appears, select “Add a network, wireless or Bluetooth printer”;
  • After that, the computer will make a list of available devices, in which you will select the option you need. Press “Next”;
  • the installation of the necessary drivers will occur after that;
  • then a message will appear about the successful installation of the printing device;
  • here you can set your default printer and print a test page.
READ  How to Connect an all-in-one printer to a computer via Wi-Fi

It doesn’t take long to set up your printer and you can start enjoying all the benefits of a Wi-Fi connection very quickly.

It so happens that users have to deal with a problem related to how to connect a printer via WI-FI. This issue is especially relevant if it is necessary to connect the device to the network, i.e. LAN. Of course, you can connect a Wi-Fi router directly to a computer / laptop and send print jobs from other PCs. But this option is inconvenient and impractical, because the computer to which the printing device is connected must be turned on almost around the clock and at the same time be tied to a specific place.

That is why, in this case, you need a router that will distribute Wi-Fi, which, in turn, will allow you to connect a wireless device. There are several effective ways to do this. The choice of one of them depends on what functionality the router with an MFP has.

Connecting through the physical menu of the printer

  • To connect the Brother DCP 1612WR printer to Wi-Fi, click on the “Menu” button. Further, to select some of the items, you need to wield the “up” and “down” buttons;
  • We go to the “Network” section;
  • We select “Wireless. network”;

Solving the problem using the installation wizard

In addition, you can open the section with devices and printers on your personal computer by going to it through the control panel and clicking on the button responsible for installing a new device. It should be said right away that this method will also allow you to connect a network printer wirelessly and set up printing properly.

By clicking on the installation of the device, in a new window you will need to select the following among the two options presented: “Add network”.

After that, the system will start searching automatically. If a printing device is found, it will be displayed in the search box.

To configure the printer via WI-FI, you should double-click on the printer icon, and in the small window that opens, enter the IP address specified in the instructions supplied with the purchased device.

As soon as you see a notification that the device was connected successfully, you can reboot the PC.

Now you can start solving the problem related to how to print to a printer connected via a Wi-Fi router. In general, there is nothing complicated here. just like with a local printer, you just need to call the print window, set the settings and print the necessary documents. The main thing is that the wireless connection is really reliable and stable.

HP printers. Wi-Fi Direct Printing

Wi-Fi Direct and HP Wireless Direct provide a direct wireless connection between your printer and a mobile device or computer without a router.

Most HP wireless printers use Wi-Fi Direct, an industry-standard connection type developed by the Wi-Fi Alliance (in English). HP Wireless Direct. is a technology developed by HP and used in most wireless printers released between late 2011 and mid 2014. If your printer uses HP Wireless Direct, go to Printing with HP Wireless Direct for more information.

Review this table to learn about the differences between the two connection technologies.

Maximum number of simultaneous device connections

Printer name that appears when printing or connecting

The wireless computer or device can automatically detect and connect to the printer

Yes: automatic or manual (button / PIN)

The computer or device can connect to the printer and the Internet at the same time

Android devices and Windows 10 or 8.1 PC

Devices can connect to the Internet and / or to each other through a printer

Connect an HP Printer to a Wireless Network Using Wi-Fi Protected Setup | HP Printers | HP

The printer can connect to the Internet through the device

Printer IP address (for accessing the printer’s Embedded Web Server)

Automatic and manual settings

You need to connect to a printer before selecting and printing a document or photo

The “xx” in the Wi-Fi Direct name or HP Wireless Direct name is a two-digit code unique to the printer.

Method two. use the SSID password

A fairly simple way to connect to Wi-Fi, but it works only in one case. if the printing device is equipped with an LCD screen. So, you need:

go to the menu “Wi-Fi connection setup”;

go to the sub-item “Wireless Network Setup Wizard”;

  • find your network in the displayed list;
  • enter the SSID password (be sure to be case sensitive!).
  • If everything is done correctly, the Wi-Fi icon on the printer will turn green. Our congratulations! You connected Wi-Fi yourself using the SSID password.
  • If the printer can create a peer-to-peer Wi-Fi network

    You can use the printer’s own peer-to-peer Wi-Fi network to set up Wi-Fi printing:

    • Install the Mac software that came with your printer and make sure it includes the Add Printer Assistant.
    • Make sure peer-to-peer Wi-Fi is enabled on the printer. See your printer documentation for details.
    • Open the Wi-Fi menu on your Mac by clicking the Wi-Fi icon in the menu bar, and then select the printer’s ad-hoc Wi-Fi network name. While your Mac is on the printer’s network, your Mac won’t be able to connect to the Internet or other services on your regular Wi-Fi network.
    • Use the Add Printer Assistant to connect the printer to a Wi-Fi network. See your printer documentation for details. The printer may reboot before connecting to the network.
    • Go back to the Wi-Fi menu on Mac and go back to your Wi-Fi network.

    How to set up a printer over Wi-Fi: 4 ways to connect

    • We connect via WPS
    • Using the SSID password
    • Connect without using a password
    • We use a computer

    Wireless technologies are incredibly popular today, so manufacturers of electronic equipment must take this nuance into account. So, almost all modern printers are equipped with a Wi-Fi module, and this is very convenient, because you no longer need to use wires to connect the device to a PC or mobile gadgets. Plus, it’s very easy to set up and connect your printer via Wi-Fi, and in this article we’ll talk about how to do it without the hassle.

    If the printer uses Wi-Fi Protected Setup (WPS)

    If your Wi-Fi router is not manufactured by Apple, check your router documentation for how to add a WPS printer.

    If your Wi-Fi router is an AirPort base station:

    • Open AirPort Utility, located in the Utilities folder in the Applications folder.
    • Select a base station in AirPort Utility, then enter the base station password if prompted.
    • From the menu bar select “Base Station” “Add WPS Printer”.
    • Select First Attempt or PIN as the allowed WPS connection type. Then click “Continue”.
    • If you selected First Attempt, press the WPS button on the printer. When the printer’s MAC address appears in AirPort Utility, click Done.
    • If you selected PIN, enter the printer’s PIN, which should appear in the documentation for the printer. Then click “Continue”. When the printer’s MAC address appears in AirPort Utility, click Done.
    • Close AirPort Utility.

    PIXMA MG2920 Wi-Fi Setup
    Windows OS

    Installing the all-in-one on your network

    Installing the all-in-one on your network

    On this page, you will be able to complete the printer setup and your network. For PIXMA MG Series users: Do this to successfully install the Universal Network for the first time. You can check your network requirements before connecting the engine to the network, you can be sure that the computer configuration, the access point / router is equipped with the device, the computer is connected to the network, and the wireless connection. Make sure your computer has a configuration (access point / router).

    Installing the software

    For those of you using the machine by connecting it to your computer, you first need to copy or install the software to your computer’s hard drive.

    • Log in as an administrator / members of the admin group
    • Close all running applications before starting installation
    • Do not switch user during installation
    • Connection may be required during the installation process
    • Requires a restart during the installation process
    • Follow the instructions on the screen, do not release the installation CD during installation and restart, resume after restarting the computer
    • If the firewall security software function is enabled is on, a warning message will appear stating that Canon software is trying to access your network and when the warning message appears. you can configure your security software to always allow access.

    PIXMA MG2920 series Set up your wireless network, be sure to install the software on your computer first. Then insert the installation CD into your computer.

    The installation process will start automatically. The installation instructions in this document describe the [Wireless Installation] methods. for which you do not need to know the SSID (network name.) of the network, and the / frasa password does not require connecting the printer to the computer via USB for a while. cable. Wireless installation. This may not be supported by Windows XP-Windows XP users who use the [Wireless setup with a USB cable] method for each temporary USB cable connected between the printer and your computer during the installation process.

    READ  How to connect an epson printer to a laptop

    Even if you don’t have an installation CD, follow these steps to start the installation process.

    • Download software (click here to download)
    • Then double click the downloaded.exe file

    If a new window or User Account Control dialog box appears during installation, click Yes or Continue

    • Click “Next” on the home screen.
    • Select WLAN connection, click Next
    • Select an access point to connect, click “Next”
    • Follow the instructions on the screen.
    • Select “on screen” Wireless setup Procedure to select the installer (2-1) during installation. The NET Framework screen appears, then click “Yes”
    • Connecting via the Wireless Settings Screen (3-1). Click Next
    • Connecting via the wireless settings screen (3-2). Click Next
    • Click Next on the connection complete screen
    • Follow the instructions on the screen, and then from the software installation list, select the software to install and click Next

    MP drivers are necessary and cannot be canceled, we recommend that you install the “My Pictures” menu and quickly use all the printer’s capabilities.

    connect, browser, printer, wi-fi

    Then continue to follow the instructions on the screen (when the Installation Complete dialog box appears, click Finish).

    Follow the rest of the onscreen instructions to complete the process and then exit the installer. In this case, how to set up the printer and your network. Simple reviews we provide for you who need to complete Wi-Fi Setup.

    tags: how to connect, driver installer, printer to Wi-Fi, Wi-Fi setup.

    If your printer has a built-in display

    with a touchscreen or other built-in display (control panel) typically expects you to use that display to select or enter your Wi-Fi name and password. See your printer documentation for details.

    How to set up printing on a printer from a smartphone and tablet on iOS, Android

    Now more and more users use tablets for work, it is convenient and practical. And of course, you also need to print certain documents. And here’s how to do it, we will show you now.

    Direct connection

    How to connect any printer to a laptop, see here:

    When ”connecting the printer to the PC via a USB cable, connect them and run the tool for setting up the Pantum M6500W connection via Wi-Fi:

    • Select the required network if several appear in the list.

    In the case when the access point name is not broadcast, you can enter it manually!

    • Authenticate. enter the password and select the type of network encryption.
    • If successful, a window with connection information will appear.
    • If an error occurs, you will see a similar message.
    • Check your wireless login information and try again.

    When the Pantum M6500W printer is directly connected to a laptop via Wi-Fi, users can connect to the printing device without entering a password by finding it on the network. The network name will be indicated as “Pantum-AP-XXXXXX”, where instead of XXXXXX the digits of the MAC address will be indicated.

    I think our readers will not have any difficulties. But in any case, you can always write in the comments and ask any question.!

    In this article, we will show you how to connect a printer over a WI-FI network. After all, this device, if earlier, was only at work, today it stands in almost every home. A printer is a good thing, but it also has disadvantages: it takes up a lot of space, and you also have to stretch an additional wire to connect to a computer. Therefore, we decided to show how to connect a printer via a wireless Wi-Fi network. To get rid of unnecessary wires and be able to place the printer anywhere in the house.

    Connecting the Printer to a Router via USB

    The setting for this method depends on the router model you are using. Basic parameters are set in the web interface of the router, but for greater convenience and the ability to perform fine-tuning, there are special utilities. The most common routers that allow you to connect via USB: Asus and TP-Link.

    Infrastructure mode

    For cases where the router is compatible with WPS, the device is connected and configured by pressing a single key on the case without the participation of a computer:

    • To do this, press and hold the button for Wi-Fi connection on the MFP control panel.
    connect, browser, printer, wi-fi
    • Hold WPS on the wireless router (be sure to disconnect the network cable from the router before doing this).

    Devices will automatically establish a connection even if the access point is broadcasting encrypted traffic and does not broadcast the SSID to the network.

    • Under the address bar, click “Add Printer” (in Windows 7. “Install”).
    • In the window that opens, select “Add network, Bluetooth or wireless”. If the list is empty, click on the inscription below, specify the type “TPC / IP device” and enter its IP address and port number to which it is connected.
    • Select “Special” and go to the section to change the parameters.
    • Enter your details and specify the “LPR” protocol.
    • Install drivers or wait for Windows to do it automatically.
    • Name the MFP and share it if necessary.
    • If at the 5th step there is a desired device in the list, select it.
    • After installing the drivers, the printer can be selected as the default.

    We look at the presence of WPS on the router in two ways:

    • Turning the router over, you will see a sticker with the WPS icon on it, and the PIN code is written opposite. In the future, we will need it to connect devices.
    • The absence of an icon on the stickers does not mean that the router does not support this technology. Enter the router settings, find the WPS section, it is often located in the Wi-Fi (Wireless network) item. If found, then everything is in order, it supports this function.

    After making sure that both devices work in this mode, we proceed to connect.

    Installation for TP-Link router

    The app is available at TP-Link Download Center. Select your Wi-Fi router model from the list or enter it in the search bar located in the upper left corner of the page. Install the “Utilities” filter and download “TP-Link USB Printer Controller” for your operating system. Open the downloaded file and after the unpacking is complete, click the “Next” button.

    Specify the path in the computer file system where the application will be installed. By default, installation is performed in the “Program Files” directory. You can set a different location using the “Change” button. Then click “Next” to go to the next step.

    During the installation process, the Internet connection may be lost. Disconnecting the connection is required by the utility to correctly configure the network parameters. When the installation is complete, a final window will open with the option “Launch USB Printer Controller” available. Check this box and click “Finish” to complete the installer.

    The tree-like structure of the found network equipment will be displayed in the interface of the window that opens. Select the desired device from the list. Click “Auto connect for printing” and check the printer that will start by default.

    Important! It is recommended that you set the print controller to start automatically every time the operating system boots. To do this, go to the “Tools. Setting “and activate the first item.

    Adding a Network Printer in Windows

    Open the Windows Control Panel. If you have selected icon display mode, go to the Devices and Printers section. When choosing the category mode, use the path: Hardware and Sound. View devices and printers “.

    All external equipment connected to your computer is available in this section. By default, devices that have been used are displayed. Click “Add Printer” to connect to the new device.

    The system searches for available printers and MFPs. If it does not bring results, enter the required data manually. Since the connection is made via a Wi-Fi router, check the second item: “Add by TCP / IP address”. Click the “Next” button to specify the parameters.

    Advice! This configuration method is suitable both for printers connected to the router via Ethernet or USB, and for devices connected to other computers on the local network.

    Select the type “TCP / IP” from the drop-down list. In the “Name or address” field, enter the IP of the connected device. You can clarify this parameter in the control panel of the router. Log into the web interface at the address indicated on the sticker at the bottom of the router. When logging in, use the standard username and password, which are located in the same place.

    Go to the “DHCP” section of the menu. It is usually found in the Local Area Network (LAN) settings. Open the DHCP section, which lists the connected clients and their assigned IP addresses. At this point, you can use one of two connection options:

    READ  Test print for epson color printer

    Using a network name. To do this, check the hostname in the DHCP client table, for example “CanonMG3540”. Copy this name and paste it into the Add Printer Device window in Windows.

    Binding a static local address. To use this method, go to the appropriate DHCP configuration section and add a new mapping. Find your printer, and in the “IP Address” field, enter the desired combination from the local range. For example, if the last connected computer is, enter the following IP:

    Provide additional information about the port you are using. To do this, select the “Special” item and click “Options”. By default, the “Raw” protocol will be selected in the new window. However, most modern devices use “LPR”. Check it in the settings and specify an arbitrary name for the queue. Save the new parameters by clicking the “OK” button.

    Select your printer manufacturer and model from the list on the right. You can also use the installation CD if it was included with your purchase. To do this, click “Have Disk”. After finishing the driver installation, click “Next”.

    At the final step of the installation wizard, a notification about the successful completion of the process will open. We recommend that you select the Use this printer as default check box to avoid having to select a device each time you print. In the same window, you can check the connected device. To use it, click “Print a test page”. Complete the installation by clicking the “Finish” button.

    Many modern printers and multifunctional devices (MFPs) are connected to computers and laptops not via classic USB, but via wireless technologies. Wi-Fi is commonly used as such an interface, especially in offices and small businesses where it is necessary to provide general access to the printing device. Let’s consider how to connect a Pantum M6500W printer via Wi-Fi and configure it for optimal performance.

    Pantum connects to the network in two ways:

    • in infrastructure mode. switching is performed through a wireless router;
    • in direct connection mode. the printer connects to the laptop directly via Wi-Fi.

    With any connection, the device will work with only one computer at a time!

    Review and setting up printing on the Pantum MFP here:

    Option number 1: use the WPS function

    If all computers in your home or office work through a router, then the easiest way is to connect the printer to a laptop via Wi-Fi using the WPS function. Of course, in order to use this technology, you must have it both on the printer and on the router. Therefore, first, let’s make sure that it is on the devices.

    Computer settings

    When the printer and router are ready for use, you can proceed to set up your computer. Here is an example based on Windows 10, but in general, the steps are similar to the seven and eight.

    • Through the Start menu, go to Settings and then Devices. Or find “Devices” in the search bar.
    • On the left find “Printers and Scanners”.
    • Click on the link “The required printer is not in the list”.
    • In the pop-up window, select “Add a printer by its TCP / IP address or hostname”.
    • Select device type. “TCP / IP device”.
    • Drive the printer’s IP into the second line. The latter will be filled in automatically.
    • Uncheck the box “Poll the printer and select the driver automatically”.
    • The computer will not see the printer. In the window with a message that the device is not online, check the box “Special”.
    • Click “Options” and “Next”.
    • In the pop-up window, check the “LPR” checkbox, and in the “Queue name” window, enter any name. Click “Ok”.
    • The system will prompt you to install the drivers. Select “Have Disk”.
    • In the new window, check the box “This printer is not shared”.

    In the installation completion window, you can check that the printer is used by default, print a test page. After that, you can get to work. The instructions look cumbersome, but in fact, the longest process will be installing the driver by the computer.

    Problems that may arise in the process

    Often, if the instructions are followed, difficulties still arise with the connection, but they are usually solved quickly.

    Connecting and configuring the printer via WI-FI

    Document printing is slowly becoming a thing of the past. and more issues can already be resolved via the Internet using electronic signatures, but the most important points are still not complete without a pen, paper and a printer.

    Often, the printer only needs to be used 1-2 times a month. At the same time, it takes up space on the table, and the constant search for wires that have fallen over the table for connection takes twice as long as the printing itself. To get rid of this, you need to connect your printer to Wi-Fi. This will allow you to send documents to print from any device connected to your home local network. This will allow you to put the device under the table or even in a drawer, if the dimensions allow, and lead only one power cable to it.

    In offices where there are a couple of printers for a dozen or more employees or printers, on the contrary, there are many, using a wireless connection is even more convenient. But for this you need to know the IP address of each desired MFP.

    If the printer does not have Wi-FI

    Such a device cannot be connected via Wi-Fi, but it is still possible to connect to a local network. There will be no fewer wires, but you can still connect using a smartphone or laptop without a direct connection. To do this, you need to connect the router and printer using a USB cable. Accordingly, both devices must have these connectors. You also need to first find out the model of the MFP and the IP address of the router. One quick way to do this is to type in “ipconfig” in the command line. The required address will be in the line “Default gateway”. Next, you need to do the following:

    • connect the cable to the router, and after 3 minutes. to the printer;
    • connect the computer to the network via cable or Wi-Fi;
    • enter the router settings menu;
    • find the section “Network map”.

    If the printer appears, then you can proceed to setting up the computer.

    Connecting to a smartphone or tablet using Google Cloud Print

    To send photos or documents for printing directly from a mobile device without transferring files to a computer, you need:

    • link printer to Google account:
    • open the Chrome browser;
    • open the menu on the toolbar. Usually the button looks like 3 vertical dots;
    • find “Settings”;
    • scroll down the page and open the advanced settings section;
    • find the section “Google Cloud Print”;
    • click “Add printers”;
    • log into your Google account if necessary;
    • print a test page. The binding is complete;
    • connect your smartphone to any network and log into your Google account;
    • open the file for printing and select your device in the printer selection window.

    The manual is also suitable for owners of devices running on iOS. Unless you have to create a Google account more likely. But you can try AirPrint if your printer supports.

    Using the WPS function

    If the printer and router have this function, then it is better to use it. It is easy to use and provides a fast and reliable connection.

    • Enable WPS on the printing device. If there is no screen, then you need to find the button responsible for enabling the function. If there is a display, you need to go to the Wi-Fi settings and activate WPS.
    • Press the same button on the router until the indicator starts blinking.
    • On a printer with a screen, hold down the “OK” button until a message about successful connection is displayed. If there is no display, then the connection should go through automatically.

    If everything went well, you can proceed to connecting the computer.

    Preparing to connect

    First of all, you need the source of Wi-Fi itself. a router. It is also necessary that the printer is equipped with a Wi-Fi adapter. Without it, you will not be able to connect the device to the network. Only relatively new devices have the required chip.

    To connect via Wi-Fi, the router must have the WPS function, since the connection is made through it. You can determine its presence or absence by the corresponding button. It will have the same name or pictogram, reminiscent of the old Internet connection icon. a ball with threads wrapped around it. The key can be found on the back, side or even on the bottom cover of the device. It is possible to combine the WPS button and enable.

    NNCXV.INFO 2021