How to connect a Canon pixma g3411 printer

Capacitet per cartridge (photo print)

Color printed on pictures 10 x 15 cm 6
Color: 2000 shots
Approximate additional capacity

The maximum capacity for the leftover with the charter

Back tava: max. 100 folios (charter revised)

Photo print speed

Without white flight 10x15cm: approx. 60 seconds 4

Interface type. PC / Mac

Hi-Speed ​​USB (Port B)
Wi-Fi: IEEE802.11 b / g / n
Wi-Fi Signature: WPA-PSK, WPA2-PSK, WEP, Admin Password

Method two. use the SSID password

A fairly simple way to connect to Wi-Fi, but it works only in one case. if the printing device is equipped with an LCD screen. So, you need:

connect, Canon, pixma, g3411, printer

go to the menu “Wi-Fi connection setup”;

go to the sub-item “Wireless Network Setup Wizard”;

  • find your network in the displayed list;
  • enter the SSID password (be sure to be case sensitive!).
  • If everything is done correctly, the Wi-Fi icon on the printer will turn green. Our congratulations! You connected Wi-Fi yourself using the SSID password.
  • Method one. connect via WPS

    This method will only work for you if both the printer and the router support WPS (WI-FI Protected Setup) technology. If so, follow these steps:

      using the navigation keys in the printer menu, enter the wireless connections section;

    select WPS as the connection method;

  • press and hold the WPS button on the router until the indicator flashes;
  • press and hold the “OK” key on the printing device until it indicates that the connection was successful.
  • Method three. connect without using a password

    If you have a printer without an LCD display, you can also do without entering the SSID. For this:

      press the Wi-Fi button on the control panel. the indicator will blink. This means the printing device is trying to connect to the wireless network;

    then you need to find and press the WPS button on the router, thereby you agree to connect the device;

  • then the light on the printer control panel will turn green.
  • How to set up a Wi-Fi printer

    Wireless technologies are incredibly popular today, so manufacturers of electronic equipment must take this nuance into account. So, almost all modern printers are equipped with a Wi-Fi module, and this is very convenient, because you no longer need to use wires to connect the device to a PC or mobile gadgets. Plus, it’s very easy to set up and connect your printer via Wi-Fi, and in this article we’ll talk about how to do it without the hassle.

    Method four. use a computer

    In the settings of a personal computer or laptop, open the “Network Neighborhood” folder, then sequentially go to the “Properties” and “Network Connection” items. In the window that opens, go to the sub-item “Local network”, and then. “Network adapter properties”. After that, we find the “General” tab and select the TCP / IP protocol, after which in the “Properties” window you need to specify “Use IP address”. here you need to enter the IP address of the equipment (it can be found in the instructions supplied with the printing device).

    As you can see, connecting the printer via Wi-Fi is not that difficult. Just follow our instructions and you will certainly succeed.

    How to print photos on a Canon Pixma printer?

    • Open the front cover (A).
    • Pull out the paper support (B).
    • Load paper vertically with the PRINT SIDE DOWN.
    • Align the paper guides to the width of the paper.
    • Open the optional paper output tray (C).
    • Open the paper output tray (D).
    • Pull out the paper exit support (E).

    How to insert paper into a Canon printer?

    Insert the paper into the paper tray until it stops. Load portrait-orientation paper (short edge toward the product) with the side to be printed facing up. Paper cannot be loaded in landscape orientation. Fan the sheets to straighten the edges of the stack and straighten them on a flat surface.

    How to connect a Canon printer to a Windows 10 computer?

    Manually install a wireless printer

    • Open Settings.
    • Select Devices.
    • Select Printers & Scanners.
    • Click Add Printer or Scanner.
    • Wait.
    • Select The printer you want is not listed.
    • Select Add Printer Using TCP / IP Address or Hostname.
    • Click Next.

    How to print from a Canon printer?

    • Open the printer driver setup window.
    • Select borderless printing. Select Borderless from the Page Layout list on the Page Setup tab.
    • Check the paper size.
    • Adjust the amount of expansion for the paper.
    • Complete the setup.

    How to print a document on a Canon printer?

    From the File menu, select Print. In the Name list, specify the printer on which you want to print the document. Select the Print to file check box, and then click OK. In the Print to File dialog box, in the File name box, enter a file name.

    How to set up a printer for printing 10×15 photos?

    • Find the desired photo in the folders of the local disk, then select its context menu by right-clicking on it.
    • A window of the photo printing wizard will open in front of you, where you should click on the “Next” button.

    How to set up a Canon printer?

    • First of all, open the start menu and call the printers and faxes command there.
    • On the screen you will see a window designed to work with this type of device.
    • In the left column of the window, select the command to install a printer.
    • Click on the “Next.
    • On the pages that open, you need to select the type of printer.

    Confirming network settings

    To confirm that the printer is successfully connected to the wireless network, you can print the network settings for your printer:

    Load a sheet of A4 or Letter size plain paper.

    Press and hold the [Resume / Cancel] button until the indicator flashes 15 times, then release the button.
    The network information page prints.

    When using the data from the printout, make sure “Connection” is displayed as “Active” and that the SSID (wireless network name) contains the correct name for your wireless network.

    This completes the WPS setup procedure.

    Please now proceed by installing the software to make the most out of your PIXMA MG3540.

    If you cannot complete the WPS wireless setup following these instructions, please contact us for further instructions.

    Connecting without using WPS

    In rare cases, the router does not support the security protocol. Then you need to immediately launch the software to download and install the necessary drivers, and do the following to connect Canon via Wi-Fi:

    • Insert the CD that comes with Pixma MG3640, or open the installation file from the manufacturer’s official website.
    • Such a window will appear on the screen. We do not press anything. We wait.
    • In the next window, click the item “Printer settings”.
    • The application checks for the latest updates. Looking forward to.
    • The software should detect the country automatically. If not, select the region manually.
    • We accept the terms of the license agreement.
    • We agree with the next window. Application asks for permission to send additional information about device operation to Canon.
    • Click further until the connection method selection window appears.
    • The computer will search the Canon MG3640 on the network to connect via Wi-Fi. The process can take up to five minutes. Be patient.
    • If this is the first time the printer is connected, the computer’s network connection will be disconnected for a short time.
    • The user manual will be displayed on the screen with detailed instructions for setting up Canon. Prepare the printer for connection. Check the correct display of indicators and buttons.
    • During setup, a message may appear on the screen: “The setup wants to access your passwords.” Click “Allow”.
    • Software, drivers and tools are being installed. We wait.
    • The Add Printer button appears on the screen. Click “Add”.
    • The found printer will appear in the Add window.
    • “Bonjour” device appears first, then “Canon IJ Network”.
    • Choose the second option, the printer is configured.
    • If Canon is being installed for the first time, the software will prompt you to adjust the printheads. Agree.
    • Start to run test print.
    • Complete installation.
    READ  Where Can I Print On A Color Printer

    Attention! During the final settings, the printer offers to install additional programs that allow you to adjust images, edit the number and volume of documents. You should refuse to install these utilities. They only burden the system by offering the tools that are in the Microsoft Office suite.

    Pixma MG3640 is set up and ready to go. Also, the equipment can be connected to the computer directly, without resorting to the “mediation” of the router.

    Connecting without using WPS

    In rare cases, the router does not support the security protocol. Then you need to immediately launch the software to download and install the necessary drivers, and do the following to connect Canon via Wi-Fi:

    • Insert the CD that comes with Pixma MG3640, or open the installation file from the manufacturer’s official website.
    • Such a window will appear on the screen. We do not press anything. We wait.
    • In the next window, click on the “Printer Settings”.
    • The software should detect the country automatically. If not, select the region manually.
    • We accept the terms of the license agreement.
    • We agree with the next window. Application asks for permission to send additional information about device operation to Canon.
    • Click further until the connection method selection window appears.
    • The computer will search the Canon MG3640 on the network to connect via Wi-Fi. The process can take up to five minutes. Be patient.
    • If this is the first time the printer is connected, the computer’s network connection will be disconnected for a short time.
    • The user manual will be displayed on the screen with detailed instructions for setting up Canon. Prepare the printer for connection. Check the correct display of indicators and buttons.
    • During setup, a message may appear on the screen: “The setup wants to access your passwords.” Click “Allow”.
    • Software, drivers and tools are being installed. We wait.
    • The Add Printer button appears on the screen. Click “Add”.
    • The found printer will appear in the Add window.
    • “Bonjour” device appears first, then “Canon IJ Network”.
    • Choose the second option, the printer is configured.
    • If Canon is being installed for the first time, the software will prompt you to adjust the printheads. Agree.
    • Start to run test print.
    • Complete installation.

    Attention! During the final settings, the printer offers to install additional programs that allow you to adjust images, edit the number and volume of documents. You should refuse to install these utilities. They only burden the system by offering the tools that are in the Microsoft Office suite.

    Pixma MG3640 is set up and ready to go. Also, the equipment can be connected to the computer directly, without resorting to the “mediation” of the router.

    Connecting using WPS

    WPS is a standard for automatically creating a wireless network. Designed to simplify router configuration for ordinary users.

    • Before connecting, you need to make sure that there is a “WPS” button on the router;
    • In the software settings of the router, enable the WPA or WPA2 encryption protocol.

    Attention! Not WEP at all, otherwise the MG3640 will not connect. You can check it in the wireless settings on the PC.

    After completing the settings and checks, do the following to connect the Canon Pixma MG3640 to the router:

    • Turn on the printer, hold down the Wi-Fi button until the power indicator starts blinking.
    • Press the “Black / BW” button first, then “Wi-Fi”.
    • The power indicator should be solid green and the Wi-Fi indicator should blink faster.
    • On the router (Wi-Fi router), press and hold the “WPS” button for two minutes.
    • If the power indicator starts blinking, the connection is being established.
    • Both indicators are on without blinking. the printer is connected to the router.

    After the end of the procedure, do not forget to install the software, the driver from the official Canon website, and follow all the instructions.

    Standard connection method

    For Windows users: insert the supplied CD and run the installer.

    If there is no installation CD provided with the product, download the manuals and software to continue.

    After the initial screen is displayed, click [Next].

    When the following screen is displayed, enter your password to enable installation of the Assistant Tool, then click [Installation Assistant]

    After the following screen appears, click [Next].

    Note: When a screen appears asking you to choose between USB and Wireless, select [Wireless].

    Make sure the printer is on, the light is on, and then click [Next].

    Click [Connect to the network].

    When the following screen appears, click [Wireless Installation].

    Please note: Wireless installation method is not supported for Windows XP users. Select [Custom Installation], then go to step 5.

    When the [Connecting via Wireless Setup] screen appears, hold down the [Wi-Fi] button (A) on the printer until the orange alarm indicator (B) flashes 2 times, then release after the second flash.

    Check that the Wi-Fi indicator (A, blue) is blinking rapidly and the power indicator (green) is on. Click [Next].

    Please note: your network connection will be disconnected during installation.

    Windows XP users only: Select [Wireless Setup with USB Cable]

    After the following screen appears, select your region and click [Next].

    After the following screen is displayed, select the region of residence and click [Next].

    After the following screen appears, select the software you want to install and click [Next]. If you are not sure what software you want to install at this stage, do not worry. you can always uninstall it at a later stage.

    When the following screen appears, click [Yes] to accept the terms of the license agreement.

    When the following screen appears, click [Next].

    The next screen shows the printer model and the name (or SSID) of the wireless network.

    READ  Windows Does Not See The Printer What To Do

    Windows (excluding Windows XP users)

    Click [Complete].

    This concludes the wireless setup for Windows.

    Windows XP users, or users of systems where the printer cannot be found, need to proceed with the USB installation detailed in step 6.

    When the following screen appears, click [Add Printer]

    On the next screen, select the [Canon IJ Network] version of the network driver and click [Add].

    Click [Next] to complete the installation.

    This concludes the wireless setup for Mac.

    Users of systems where the printer cannot be found will need to proceed with the USB installation detailed in step 6.

    Configuring with a USB cable for Windows XP users and users on systems where no network connection is detected

    Select [Set up a network connection with USB cable], then click [Next].

    After the following screen appears, connect the printer to your computer using the supplied USB cable. This cable has a symbol on the connector.

    For Mac Users: Click [Next].

    After the printer is detected, the following screen appears.

    The name of the access point to which the computer is connected will be displayed (in place of “xxxxxxxxxxxxx”).

    If you want to connect the printer to a wireless network, click [Yes].

    When the following screen is displayed, click [Allow].

    After the following screen appears, disconnect the printer from your computer and click [Next].

    When the following screen appears, click [Finish].

    This completes the setup for Windows.

    Once the printer is found, the following screen appears, displaying the name of the access point to which the computer is connected (in place of “xxxxxxxxxxxxx”). Click [OK].

    When the following screen appears, click [Add Printer].

    On the next screen, select the [Canon IJ Network] version of the network driver and click [Add].

    Click [Next] to complete the installation.

    This completes the setup for Mac.

    If you cannot complete wireless setup following these instructions, please contact us for instructions on how to proceed.

    How to connect a printer via WI-FI Canon pixma

    Connecting your printer via Wi-Fi is a convenient feature that frees your work area from wires. But manufacturers still cannot provide a simple and understandable way to connect equipment to a PC. In this article, we’ll show you how to quickly connect your Canon MG3640 over Wi-Fi. Here are some convenient ways.

    Reference! The Canon Pixma MG3640 is an inkjet multifunctional printer, scanner and copier. Average Highlights:

    • Printing. color;
    • The maximum image size is A4;
    • Ability to print text and images from both sides;
    • B / W printing speed. 9 A4 pages per minute;
    • Color printing speed. 5 A4 pages per minute;
    • Main input tray 100 sheets.

    Connecting to the MAC OS

    But how do you connect a Canon printer to an Apple laptop? There is no floppy drive in the products of this company. You need to download the software to install the drivers and follow the instructions:

    • Double click on the downloaded file, start the “Settings” process, then click “Open”.
    • On the next screen, press “Next”.
    • Enter your system password, allow the installation of a third-party tool.
    • Next screen. Click “Start setup”.
    • The program is looking for the latest updates. It may take a few minutes.
    • Specify the required region and country.
    • Confirm License Agreement.
    • Agree or opt out of the Extended Survey Program (sends MFP performance data monthly to Canon).
    • The computer is checking the status of the printer. The process takes up to five minutes.
    • Select wireless connection.
    • Select the connected printer from the list of devices.
    • The user manual will be displayed on the screen with detailed instructions for setting up Canon. Prepare the printer for connection. Check the correct display of indicators and buttons.
    • A separate message will ask for access to passwords. Click “Allow”.
    • The latest drivers are installed on MAC OS.
    • The Add Printer button appears on the screen. Click “Add”.
    • The found printer will appear in the Add window.
    • “Bonjour” device appears first, then “Canon IJ Network”.
    • Choose the second option, the printer is configured.
    • Is MG3640 installing for the first time? The software prompts you to customize the printheads. Agree.
    • Press “Start” to start a test print version. In a separate window, set the number of copies, page size.
    • Complete Canon MG3640 Installation.

    Connecting directly to a PC

    For a visual aid for connecting a printer without a router, see the following

    The router is not working, but the printer is needed? We follow these instructions:

    • Hold down the “Wi-Fi” button until the power indicator starts blinking.
    • Then press the “Color” button, then. the “Wi-Fi” button. The indicator next to her began to blink.
    • Run the previously downloaded driver from the official website.
    • Disconnect from a wireless network if connected to a PC.
    • In the “Select a method of connecting to a wireless network” select “Direct connection”.
    • The printer is connected to the PC, all sensors stop blinking.
    • Canon will be displayed as a separate Wi-Fi network in the “Current Connections” section of the computer.

    Advantage: Canon Pixma MG3640 is independent of router signal quality. Disadvantage: PC does not have access to the Internet via Wi-Fi, which can interfere with comfortable work.

    Canon PIXMA G1410: Recommended Accessories

    • Ink Tank GI-490BK Black Pigment black ink for printers and MFPs of the PIXMA G series is designed for monochrome printing on plain paper. 135ml container lasts 6,000 sheets at 5% typical page coverage.
    • Ink Container GI-490C Cyan Dye-based ink for PIXMA G Series printers and MFPs is designed for color printing on plain and photo papers. 70 ml container for 7000 sheets.
    • Ink Container GI-490M Magenta Magenta dye ink for PIXMA G Series printers and MFPs is designed for color printing on plain and photo papers. 70 ml container for 7000 sheets.
    • Ink Container GI-490Y Yellow Dye-based yellow ink for PIXMA G Series printers and MFPs is designed for color printing on plain and photo papers. 70 ml container for 7000 sheets.
    • Canon Glossy Everyday Use Photo Paper (GP-501) Glossy photo paper for affordable home photo printing. Keeping the ink at a great depth avoids breaking the glossy layer, ensuring long-lasting prints.
    • Canon Matte Photo Paper (MP-101) Matte photo paper for printing photos and high-quality graphics. Produces photorealistic colors far superior to conventional paper. Thick paper making it ideal for artistic creation.
    • Canon Plus Glossy II Photo Paper (PP-201) A4 Glossy paper for high quality photo printing. Differs in increased density. 265 grams per square meter. Ideal for advanced amateur photographers who value print quality.
    • Canon Plus Semi-gloss Photo Paper (SG-201) A4 Velvety semi-gloss photo paper for high quality photo printing. Has a microporous coating, due to which prints dry instantly. Ideal for photos with soft tones.
    • Canon Pro Luster Photo Paper (LU-101) A4 Professional grade photo paper with an embossed semi-matte finish. It has a high density. 260 grams per square meter. Provides image stability and vivid colors with crisp detail.

    Connecting Canon Pixma G3410, G3411, G3415 via Wi-Fi to a smartphone Read more »

    Hello dear reader! Today we will talk about how to connect to WI-FI using the Canon G3400 printer. Specifically, the following instructions apply to the G3415 and MG3500 models. I’ll say right away that you will need to do everything according to the instructions and there will be almost no logic in it, since the creators of this device for some reason did not bother to make the necessary actions intuitively clear. Honestly, it is still not clear why in our time it all comes down to “dancing with a tambourine.” Let’s start!

    READ  Epson printer prints with stripes what to do

    Normal connection

    • We turn on the printer, after that you need to hold down the Wi-Fi button. You need to clamp it until the orange light blinks exactly once on the left;
    • The blue button should flash immediately. Now we go to our router, find the “WPS” button and hold it down. In this case, two lights will flash on the printer.
    • As soon as the connection is established, the lights will simply continue to burn normally. First of all, pay attention to the Wi-Fi connection light.
    • After that, you need to make sure that the printer is connected to the network. To do this, hold down the “Resume / Cancel” button with an inverted triangle. Then one of the indicators should blink exactly fifteen times. Let’s release the button. A page is displayed that displays information about the wireless network. The Wi-Fi name must be the same as your router.

    How to connect devices to a computer or local network?

    I have considerable experience with various Canon printers, including the latest series. However, even I initially had a lot of questions, how to connect Canon PIXMA G3410 to my computer? Similar questions may arise for other devices of the updated PIXMA G line. Russian people do not like to read instructions. However, it is precisely following the instructions that helps to set everything up very quickly and easily. So let’s start writing in order about connecting PIXMA G to Wi-Fi and a computer.

    There are at least two options and several pitfalls here. Two of the four devices of the updated PIXMA G line can be connected to a computer via Wi-Fi: these are PIXMA G3410 and G4410. An alternative connection method for them is a USB cable. The “younger” models PIXMA G1410 and PIXMA G2410 can only print via USB cable. And here we meet the first “pitfall”. Traditionally, for modern printers, a USB cable is not included in the package. USB B cable must be purchased separately.

    Contents Canon PIXMA G3410. USB cable not supplied.

    The second subtle point is operating system compatibility. The point is that the PIXMA G1410, PIXMA G2410 and PIXMA G3410 are not compatible with MAC OS. This operating system is supported only by the top-end PIXMA G4410.

    We will not dwell on configuring devices for USB connection. Everything is simple here: go to Canon.com/ijsetup and download the latest drivers and software. It’s more interesting with a Wi-Fi connection. Most of us have a router at home that “distributes” the password-protected Internet to our home computer, smartphone and other devices. But the PIXMA G3410 and G4410 do not have a keyboard or touch screen to select a network and enter a password from it to connect. How to be? The answer is simple: follow the instructions unquestioningly.!

    The first step is standard. go to Canon.com/ijsetup and download the firmware bundle. Let’s start! And then you just need to do very clearly what the program will offer.

    Naturally, the first time the software will not find the printer on the network, because it is not connected to it. But this is not a reason to give up: we follow the prompts on the screen strictly.

    At one of the stages, you just need to hold down the Direct button on the device’s case for two seconds until a flashing smartphone icon appears on a monochrome screen (here it can really help you figure out the status of the device!).

    And again we follow the prompts on the computer And then a small miracle happens: the printer automatically connects to your local network without manually entering a password. The computer finds it without any problems. Everything is clear and smooth. Subsequent connections are made immediately after turning on the printer automatically.

    And since our MFP is on a local network, why not connect it to a smartphone on the same network? This is where the Canon PRINT Inkjet / SELPHY app does it all for you. However, if you decide not to use the existing infrastructure or you do not have a router, then you will have to connect the printer to your smartphone directly. about this on the next page.

    Setting up a wireless connection via PC or laptop

    • To set up a WI-FI connection, insert the disc into the drive, open the explorer and run the setup program. Also, the application can be downloaded from the official website;
    • At the next stage, we choose the first option. a wireless connection;
    • After that, click. connect to the network;
    • Now a very important point. If you have an old version of Windows XP, then select the bottom button. Otherwise, choose the first one. Next, on XP, you will need to connect via USB.
    • On the printer, we hold down the button with the antenna and wait until the orange light blinks exactly two times. After that, release the button and press “Next” on the printer screen;
    • After that, the Wi-Fi lamp will start blinking, and the green lamp must also be on. Click “Next”;
    • We go to the computer and select the mainland where you are;
    • We indicate the country;
    • Then there is nothing complicated, first you will be provided with a license agreement about Honor. just click “Next”. Also at other stages, we do everything similar.

    After that, you will already be connected to the printer. As a check, you can print a sheet with network data. I wrote about this at the very beginning. Or just send a test print sheet by air. If you have any difficulties, you can write your questions in the comments under the article, and I will try to help you.

    karina

    Saved 1/26/19 20:35 to computerText from

    • : Hello everyone in this video I will tell you how to connect a Canon pixma g 34 10g 3411 or g 3415 to a smartphone via Wi-Fi. Fi is off, press the network button and now install the Canon application. Prints Jed. Link to our smartphone. To do this, download it from the appstore for
    • : Apple devices or from google play for Android devices after installation, launch the application and accept the license agreement, switch the printer to the Wi-Fi setting mode for this, hold down the direct button for a few seconds when the direct icon starts flashing, release the button and the Wi-Fi icon in the application to us remains flashing on the display print top left
    • : in the corner, click on the add printer icon, on the offer to turn on bluetooth, click no at this stage, the smartphone needs to be connected to the printer’s Wi-Fi network for this, click the Wi-Fi icon and in the list that appears, select the Wi-Fi network that has the word Canon and the model in the name your printer [music] now configure the printer to connect
    • : to your Wi-Fi network from the list, select your live and enter the network password from it [music] press yes [music]
    • : at this stage, the connection setup is complete, let’s try to perform a test print [music] on this all thanks for watching
    NNCXV.INFO 2021