How to connect a Canon printer via Wi-Fi

Canon

Most Canon PIXMA series models are connected using the WPS button on the front of the body. Press and hold it until the corresponding indicator starts flashing. After that, activate the Wi-Fi Protected Setup mode on the router. The interval between clicks should not exceed two minutes, since it is during this period of time that you can connect without entering a password. Once connected, the LED will stop blinking and stay on continuously.

For Canon models with a built-in display, the connection is authenticated. In this case, you will need to enter the SSID (network name) and password from Wi-Fi. Network connection setup information can be printed. For example, for the popular MG3540 model, this is done by pressing and holding the “Resume” button.

Mobile Wi-Fi Full Set Up Canon Pixma G3000 | By TECH MUKANS

Wireless connection to a Wi-Fi router is performed using the “HP Auto Wireless Connect” technology. Synchronization is performed via WPS, without entering the PIN-code of the router. The Network Setup Tool also runs on the HP Touchscreen, under the Wireless Network menu. A feature of HP MFPs is the inability to access “HP Auto Wireless Connect” for computers with a static local IP.

Such devices are connected only after changing the DHCP server settings. To avoid these difficulties, use a WPS connection. You can activate the WPS mode via the touch display, and if it is not there, by pressing the button.

Dealing with legacy printers?

Users still use fairly old printer models. These models do not have Wi-fi connectivity. In addition, the manufacturer does not release driver updates. For this reason, users are forced to replace a perfectly working but outdated printer with a new, upgraded model. How do I find a solution? As an example, let’s try to connect the Canon LBP 1120 printer to the Windows 7 operating system on a computer or laptop.

The manufacturer’s website officially states that drivers for a 64-bit system are in development. If the user has a 32-bit OS, then there should be no problems installing the driver. You can check the system capacity in the Computer menu. Properties. System type (the Bit depth field). The driver for the LBP 1120 model is downloaded from the official website and installed on a computer or laptop.

Then the printer is connected as standard:

  • Disconnect the computer (laptop) and the printer from the power supply. Connect the printer to the computer via the USB port.
  • Turn on the printer, then the computer (laptop). After loading the operating system, the search for new equipment will begin.
  • Search for and install the driver. To do this, cancel the search for the driver on the Internet and specify the system folder (the option “Search for a driver on this computer”), where the driver was saved after downloading.
  • After installing the driver, the printer is ready to work.

And what to do if the 64-bit operating system Windows 7 is installed on the computer (laptop)?

The problem has two options:

  • Connect the printer to another computer or laptop that has the necessary drivers, and print the necessary documents and photos via the local network;
  • Pair a virtual machine with the LBP 1120 printer driver for Windows XP.

Virtual machines are familiar to many advanced users. These are emulator programs that reproduce the work of different platforms without reinstalling the working operating system. Examples of such machines are programs VirtualBox, Windows XP Mode.

Briefly, the aLGorithm is as follows:

  • Download and install a virtual machine on a computer.
  • Find and save the Canon LBP 1120 driver for Windows XP to your computer.
  • Start the virtual system, install the printer in it.

Setting up and working with virtual machines requires a fairly high level of competence. If the user is not confident in their abilities, entrust the connection of the Canon LBP1120 printer to a professional.

Connecting your printer via Wi-Fi is a convenient feature that frees your work area from wires. But manufacturers still cannot provide a simple and understandable way to connect equipment to a PC. In this article, we’ll show you how to quickly connect your Canon MG3640 over Wi-Fi. Here are some convenient ways.

Reference! The Canon Pixma MG3640 is an inkjet multifunctional printer, scanner and copier. Average Highlights:

  • Printing. color;
  • The maximum image size is A4;
  • Ability to print text and images from both sides;
  • B / W printing speed. 9 A4 pages per minute;
  • Color printing speed. 5 A4 pages per minute;
  • Main input tray 100 sheets.

Adding a Network Printer in Windows

Open the Windows Control Panel. If you have selected icon display mode, go to the Devices and Printers section. When choosing the category mode, use the path: Hardware and Sound. View devices and printers “.

All external equipment connected to your computer is available in this section. By default, devices that have been used are displayed. Click “Add Printer” to connect to the new device.

The system searches for available printers and MFPs. If it does not bring results, enter the required data manually. Since the connection is made via a Wi-Fi router, check the second item: “Add by TCP / IP address”. Click the “Next” button to specify the parameters.

Advice! This configuration method is suitable both for printers connected to the router via Ethernet or USB, and for devices connected to other computers on the local network.

Select the type “TCP / IP” from the drop-down list. In the “Name or address” field, enter the IP of the connected device. You can clarify this parameter in the control panel of the router. Log into the web interface at the address indicated on the sticker at the bottom of the router. When logging in, use the standard username and password, which are located in the same place.

Go to the “DHCP” section of the menu. It is usually found in the Local Area Network (LAN) settings. Open the DHCP section, which lists the connected clients and their assigned IP addresses. At this point, you can use one of two connection options:

Using a network name. To do this, check the hostname in the DHCP client table, for example “CanonMG3540”. Copy this name and paste it into the Add Printer Device window in Windows.

Binding a static local address. To use this method, go to the appropriate DHCP configuration section and add a new mapping. Find your printer, and in the “IP Address” field, enter the desired combination from the local range. For example, if the last connected computer is 192.169.0.6, enter the following IP: 192.169.0.7.

Provide additional information about the port you are using. To do this, select the “Special” item and click “Options”. By default, the “Raw” protocol will be selected in the new window. However, most modern devices use “LPR”. Check it in the settings and specify an arbitrary name for the queue. Save the new parameters by clicking the “OK” button.

Select your printer manufacturer and model from the list on the right. You can also use the installation CD if it was included with your purchase. To do this, click “Have Disk”. After finishing the driver installation, click “Next”.

At the final step of the installation wizard, a notification about the successful completion of the process will open. We recommend that you select the Use this printer as default check box to avoid having to select a device each time you print. In the same window, you can check the connected device. To use it, click “Print a test page”. Complete the installation by clicking the “Finish” button.

Canon printers are affordable, easy to use, and good value for money. Models of this brand have positively established themselves in the market. If installation via a cable usually does not cause problems, then setting up the printer in Wi-fi mode can be difficult. Let’s consider how to connect a Canon printer via Wi-fi to a computer or laptop, using the example of the common flagships Canon Pixma G3400, Canon Pixma MG3640.

Connecting the Printer to a Router via USB

The setting for this method depends on the router model you are using. Basic parameters are set in the web interface of the router, but for greater convenience and the ability to perform fine-tuning, there are special utilities. The most common routers that allow you to connect via USB: Asus and TP-Link.

Connecting the Printer via Wi-Fi

Devices from popular manufacturers have a similar configuration system. As a rule, the parameters are set on the printer itself, without connecting to a computer. If there is no control interface on the case, the system utilities are used that are available on the driver disk and on the manufacturer’s website.

How To: Connect To Canon MG 3600 Series Printer Via WI-FI

Connecting using Wi-fi Protected Setup

Pixma printers support router connection using WPS. This method avoids entering passwords and simplifies the hardware installation procedure. In our case, the method is recommended for the Canon MG3640 printer. To use WPS, check the router settings before setting up the printer and activate WPS if necessary. The router must be equipped with a WPS button.

READ  Canon printer does not pick up paper what to do

The aLGorithm for connecting the printer is as follows:

  • Connect the printer to the mains.
  • Press and hold the Wi-fi button until the printer power light starts blinking.
  • Press and hold the WPS button on the router.
  • When the printer and router are connected, the light on the printer will be on continuously.

The procedure for finding a printer by the router takes a few minutes, but in the future it will ensure uninterrupted access of the MFP to your network.

Connecting directly to a PC

For a visual aid for connecting a printer without a router, see the following

The router is not working, but the printer is needed? We follow these instructions:

  • Hold down the “Wi-Fi” button until the power indicator starts blinking.
  • Then press the “Color” button, then. the “Wi-Fi” button. The indicator next to her began to blink.
  • Run the previously downloaded driver from the official website.
  • Disconnect from a wireless network if connected to a PC.
  • In the “Select a method of connecting to a wireless network” select “Direct connection”.
  • The printer is connected to the PC, all sensors stop blinking.
  • Canon will be displayed as a separate Wi-Fi network in the “Current Connections” section of the computer.

Advantage: Canon Pixma MG3640 is independent of router signal quality. Disadvantage: PC does not have access to the Internet via Wi-Fi, which can interfere with comfortable work.

Educational We connect the printer via a Wi-Fi router

Connecting to a WI-FI point

To begin with, let’s consider the option of how you can connect a wireless WI-FI-Printer without a router using the direct network connection setting (peer-to-peer wireless network). For this setup, you will need to complete the following points (I recommend the first two only as a last resort if your laptop does not see the printer’s wireless network, for advanced users):

  • First, we reset the settings to factory settings (See user manual);
  • After that, we perform the basic configuration, according to your user manual;
  • We are convinced that the wireless network is working (the color WI-FI indicator on the panel should flash / light up);
  • Next, from the PC, we search for the wireless Wi-Fi network of our printer, as a rule, this is the name of its model, for example “HP”;
  • We establish a connection between the laptop and the printer (as a rule, a password is not required);
  • Install software for (Driver, see CD-ROM from the printer).

After completing all the steps, your model will automatically appear in the list of available devices, and you can print. There are disadvantages of connecting through an access point, and they are obvious:

  • The connection is not secure;
  • Lack of multi-network connectivity from a laptop;
  • Each time, manual connection.

Adding a Network Printer in Windows

Open the Windows Control Panel. If you have selected icon display mode, go to the Devices and Printers section. When choosing the category mode, use the path: Hardware and Sound. View devices and printers “.

All external equipment connected to your computer is available in this section. By default, devices that have been used are displayed. Click “Add Printer” to connect to the new device.

The system searches for available printers and MFPs. If it does not bring results, enter the required data manually. Since the connection is made via a Wi-Fi router, check the second item: “Add by TCP / IP address”. Click the “Next” button to specify the parameters.

Advice! This configuration method is suitable both for printers connected to the router via Ethernet or USB, and for devices connected to other computers on the local network.

Select the type “TCP / IP” from the drop-down list. In the “Name or address” field, enter the IP of the connected device. You can clarify this parameter in the control panel of the router. Log into the web interface at the address indicated on the sticker at the bottom of the router. When logging in, use the standard username and password, which are located in the same place.

Go to the “DHCP” section of the menu. It is usually found in the Local Area Network (LAN) settings. Open the DHCP section, which lists the connected clients and their assigned IP addresses. At this point, you can use one of two connection options:

Using a network name. To do this, check the hostname in the DHCP client table, for example “CanonMG3540”. Copy this name and paste it into the Add Printer Device window in Windows.

Binding a static local address. To use this method, go to the appropriate DHCP configuration section and add a new mapping. Find your printer, and in the “IP Address” field, enter the desired combination from the local range. For example, if the last connected computer is 192.169.0.6, enter the following IP: 192.169.0.7.

Provide additional information about the port you are using. To do this, select the “Special” item and click “Options”. By default, the “Raw” protocol will be selected in the new window. However, most modern devices use “LPR”. Check it in the settings and specify an arbitrary name for the queue. Save the new parameters by clicking the “OK” button.

connect, Canon, printer, wi-fi

Select your printer manufacturer and model from the list on the right. You can also use the installation CD if it was included with your purchase. To do this, click “Have Disk”. After finishing the driver installation, click “Next”.

At the final step of the installation wizard, a notification about the successful completion of the process will open. We recommend that you select the Use this printer as default check box to avoid having to select a device each time you print. In the same window, you can check the connected device. To use it, click “Print a test page”. Complete the installation by clicking the “Finish” button.

Let’s figure out how to connect a Printer to a Laptop via WI-FI without a Router. We have previously covered a similar topic of connecting an MFP printer to a laptop via a router, but now we will figure out more locally how to install a WI-FI printer to a laptop without a router. Consider possible problems, why a laptop may not see your printer when connecting via Wi-Fi and similar errors. First, let’s consider various options for connecting a wireless printer to a laptop without using a router.

Setting up on Asus routers

This manufacturer has developed a free program for finding a printer connected to a Wi-Fi router: “Printer Setup Utility”. It is available for download on the Asus website. There is also a list of models for which correct operation is guaranteed when connected in this way. It includes devices from the three largest companies:

To use the application for configuring network printing, run the downloaded file. Connect your computer to the router using Wi-Fi or LAN port. Plug the USB cable into a port on your router. Click “Next” in the program interface or press the hotkey “N” on the keyboard.

The files required for the utility to run will be copied to the computer. After that, the search and detection of devices connected to the USB port of the Asus router will begin. The process takes no more than two minutes. At the search stage, the “Cancel” button will appear, which will stop scanning. Restart the operation if the program freezes.

At this point, the “Printer Setup Utility” functions may be blocked by the Windows firewall. If a window with a warning about access restriction appears on the screen, select the checkboxes of the types of networks in which you want to allow the application to work. For home use, it is recommended to check both the private and public networks checkboxes. After that, click the “Allow access” button.

When the configuration is complete, the found IP address of the Asus router and its model will appear in the window. You can add the found device using a standard Windows installation. If an error occurs, make sure the Wi-Fi router and printer are plugged in and connected with a cable. It is also recommended to update the firmware using the manufacturer’s instructions.

Note! If the “Access Point Isolation” mode is set in the router settings, network devices will not have access to each other. These parameters are changed through the router’s web interface.

Connecting the Printer to a Router via USB

The setting for this method depends on the router model you are using. Basic parameters are set in the web interface of the router, but for greater convenience and the ability to perform fine-tuning, there are special utilities. The most common routers that allow you to connect via USB: Asus and TP-Link.

READ  How to make a photocopy on a Canon printer

Epson

Epson devices allow you to connect to TKIP and AES encrypted networks through the Wireless LAN Setup menu on the built-in screen. It is also available to connect via WPS using a button or by entering a PIN code on the screen. To make such a connection, click the “PIN Code Mode” section of the menu.

The network name is set automatically, in the EPSON123456 format, where 123456 is the last 6 digits of the MAC address. Using it, you can find the device in the list of DHCP clients and determine the IP address assigned to it for further addition in the Windows interface.

Note! Most printers equipped with a Wi-Fi module only work in the 2.4 GHz band. When using a dual band router, connect them to a network that operates on that frequency. If the computers you want to print from are connected at 5 GHz, change the connection before printing.

Connecting the Printer via Wi-Fi

Devices from popular manufacturers have a similar configuration system. As a rule, the parameters are set on the printer itself, without connecting to a computer. If there is no control interface on the case, the system utilities are used that are available on the driver disk and on the manufacturer’s website.

How to connect a Canon lbp6030w printer via WI-FI

Windows 7/8 / 8.1 / 10 / XP / Vista / 2003/2008/2012 (recommended)

Size: 18.3 MB (x32) 21.1 MB (x64)
Bit depth: 32/64
Links:

Read this article to understand what version of the system you have: “How to find out the bitness of the system in different versions of Windows”.

Windows 7/8 / 8.1 / 10 / XP / Vista / 2003/2008/2012 (XPS)

Size: 29.2 MB
Bit depth: 32/64
Reference: i-SENSYS LBP6030W-XPS

Connecting using WPS

WPS is a standard for automatically creating a wireless network. Designed to simplify router configuration for ordinary users.

  • Before connecting, you need to make sure that the “WPS” button is present on the router,
  • In the software settings of the router, enable the WPA or WPA2 encryption protocol.

Attention! Not WEP at all, otherwise the MG3640 will not connect. You can check it in the wireless settings on the PC.

After completing the settings and checks, do the following to connect the Canon Pixma MG3640 to the router:

  • Turn on the printer, hold down the Wi-Fi button until the power indicator starts blinking.
  • Press the “Black / BW” button first, then “Wi-Fi”.
  • The power indicator should be solid green and the Wi-Fi indicator should blink faster.
  • On the router (Wi-Fi router), press and hold the “WPS” button for two minutes.
  • If the power indicator starts blinking, the connection is being established.
  • Both indicators are on without blinking. the printer is connected to the router.

After the end of the procedure, do not forget to install the software, the driver from the official Canon website, and follow all the instructions.

Connecting directly to a PC

For a visual aid for connecting a printer without a router, see the following

The router is not working, but the printer is needed? We follow these instructions:

  • Hold down the “Wi-Fi” button until the power indicator starts blinking.
  • Then press the “Color” button, then. the “Wi-Fi” button. The indicator next to her began to blink.
  • Run the previously downloaded driver from the official website.
  • Disconnect from a wireless network if connected to a PC.
  • In the “Select a method of connecting to a wireless network” select “Direct connection”.
  • The printer is connected to the PC, all sensors stop blinking.
  • Canon will be displayed as a separate Wi-Fi network in the “Current Connections” section of the computer.

Advantage: Canon Pixma MG3640 is independent of router signal quality. Disadvantage: PC does not have access to the Internet via Wi-Fi, which can interfere with comfortable work.

Connecting to the MAC OS

But how do you connect a Canon printer to an Apple laptop? There is no floppy drive in the products of this company. You need to download the software to install the drivers and follow the instructions:

  • Double click on the downloaded file, start the “Settings” process, then click “Open”.
  • On the next screen, press “Next”.
  • Enter your system password, allow the installation of a third-party tool.
  • Next screen. Click “Start setup”.
  • The program is looking for the latest updates. It may take a few minutes.
  • Specify the required region and country.
  • Confirm License Agreement.
  • Agree or opt out of the Extended Survey Program (sends MFP performance data monthly to Canon).
  • The computer is checking the status of the printer. The process takes up to five minutes.
  • Select wireless connection.
  • Select the connected printer from the list of devices.
  • The user manual will be displayed on the screen with detailed instructions for setting up Canon. Prepare the printer for connection. Check the correct display of indicators and buttons.
  • A separate message will ask for access to passwords. Click “Allow”.
  • The latest drivers are installed on MAC OS.
  • The Add Printer button appears on the screen. Click “Add”.
  • The found printer will appear in the Add window.
  • “Bonjour” device appears first, then “Canon IJ Network”.
  • Choose the second option, the printer is configured.
  • Is MG3640 installing for the first time? The software prompts you to customize the printheads. Agree.
  • Press “Start” to start a test print version. In a separate window, set the number of copies, page size.
  • Complete Canon MG3640 Installation.

How to connect Canon Pixma MG3600 printer via Wi-Fi?

Connecting your printer via Wi-Fi is a convenient feature that frees your work area from wires. But manufacturers still cannot provide a simple and understandable way to connect equipment to a PC. In this article, we’ll show you how to quickly connect your Canon MG3640 over Wi-Fi. Here are some convenient ways.

Reference! The Canon Pixma MG3640 is an inkjet multifunctional printer, scanner and copier. Average Highlights:

Connecting without using WPS

In rare cases, the router does not support the security protocol. Then you need to immediately launch the software to download and install the necessary drivers, and do the following to connect Canon via Wi-Fi:

  • Insert the CD that comes with Pixma MG3640, or open the installation file from the manufacturer’s official website.
  • Such a window will appear on the screen. We do not press anything. We wait.
  • In the next window, click on the “Printer Settings”.
  • The application checks for the latest updates. Looking forward to.
  • The software should detect the country automatically. If not, select the region manually.
  • We accept the terms of the license agreement.
  • We agree with the next window. Application asks for permission to send additional information about device operation to Canon.
  • Click further until the connection method selection window appears.
  • If this is the first time the printer is connected, the computer’s network connection will be disconnected for a short time.
  • The user manual will be displayed on the screen with detailed instructions for setting up Canon. Prepare the printer for connection. Check the correct display of indicators and buttons.
  • During setup, a message may appear on the screen: “The setup wants to access your passwords.” Click “Allow”.
  • Software, drivers and tools are being installed. We wait.
  • The Add Printer button appears on the screen. Click “Add”.
  • The found printer will appear in the Add window.
  • “Bonjour” device appears first, then “Canon IJ Network”.
  • Choose the second option, the printer is configured.
  • If Canon is being installed for the first time, the software will prompt you to adjust the printheads. Agree.
  • Start to run test print.
  • Complete installation.

Attention! During the final settings, the printer offers to install additional programs that allow you to adjust images, edit the number and volume of documents. You should refuse to install these utilities. They only burden the system by offering the tools that are in the Microsoft Office suite.

Pixma MG3640 is set up and ready to go. Also, the equipment can be connected to the computer directly, without resorting to the “mediation” of the router.

Factory reset

If the printer needs to be connected to a different computer, or connected through a new router, you must reset the network settings back to factory defaults. Do the following:

  • Hold the red Resume button until the light blinks 21 times.
  • Release the button.
connect, Canon, printer, wi-fi

The network settings have been reset to factory settings. With these settings, printing and copying documents via a computer will be unavailable.

If someone is interested, you can see the review of the MFP, which is discussed in our article:

To connect your printer to your computer, you must follow the guide provided. If none of the methods works, you should make sure that the router is turned on and the computer is picking up the Wi-Fi signal. If you have any questions, write to us. in the comments or in the online chat. We are always happy to help our readers and subscribers! Thanks for attention!

READ  Is It Possible To Connect A Printer Via The Phone

Translate all gadgets to 802.11N

When working with the “ancient” standards 802.11G or 802.11B, the ability of the network to quickly transfer information is reduced to 80%, so it’s time to move to a more relevant one.

The standard is launched very simply:

  • in the Internet browser, you must write the ip-address of the gadget (indicated on the label);
  • enter username and password (factory or personal);
  • go to the menu and select “Basic settings”;
  • go to “Wireless mode” and select 802.11 N from the list.

It remains only to save the settings by clicking on “Change” and start testing the operation of the gadget in the updated standard.

A nuance: in devices from different manufacturers (for example, ASUS or Tenda), the settings may differ. details can be found in the instructions for use, which is supplied with the unit.

Setting the channel width 20 MHz

802.11N technology works with broadband by default to increase network throughput. But it should be borne in mind that this will be effective only with an excellent signal. Under standard Wi-Fi conditions, this is almost impossible to achieve. In addition, 40 MHz channels operating at 2.4 GHz can interfere with other gadgets that use this range.

And with a weak signal, a broadband channel has the opposite effect. the data transfer rate decreases, and noise appears. In devices like ASUS RT-AC66U, the use of such channels is the default, so you should change it manually.

In the additional Wi-Fi settings, you need to set the value of 20MHz opposite the item “channel width”. Then click on “Save” and restart the device for the updated parameters to take effect.

Improving the speed of the Internet through the Wi-Fi network of the router

Problems become obvious when a user watches, for example, a video in good quality and sees that the speed of information transfer via Wi-Fi only reaches the minimum 20-30 Mbit per second, while the tariff is designed for 100 Mbit or even more How to increase the speed of wireless Internet through a Wi-Fi router in this case?

To begin with, it is worth finding out 3 points:

  • Decide on the capabilities of the device itself. Budget devices with basic equipment provide average internet speed. In inexpensive units, the manufacturer can save on the chipset (1 core, minimum frequency), the amount of RAM, and antenna power. For home use and simple online work, this is quite enough. If you need to quickly download large files, play adventure games and shooters, you should think about purchasing a more expensive device (for example, TP-Link ARCHER-C5400X).
  • Look at the Wireless N label on the box. The numbers next to this inscription, for example 300, indicate the maximum achievable speed over Wi-Fi (if you use the latest 802.11N standard). If an older standard is used, then the indicators will be somewhere in 1.5-2 times less than the specified number.
  • Update the firmware. Before trying to increase the Wi-Fi speed by manipulating the settings, you need to update the device’s firmware to the newest one (it is also advisable to do this for Wi-Fi adapters). In addition, the compatibility of computer software can have a negative impact on speed. Therefore, you should visit the web portal of the developer company, download the latest version from there, go to the Windows “Device Manager” or adapter settings, make changes to the firmware.

What else do you need to check before setting up your unit? The number of connected gadgets to it. After all, the device has to “divide” the initial connection speed among all. To successfully solve this, you can use specialized powerline adapters that will help equip a wireless virtual network without “jumps” in the pace of work.

Another simple method to increase the speed of Wi-Fi operation several times is to use an interval of 5 gigahertz. Some routers support 2 bands: 2.4 and 5 GHz. Most often, Wi-Fi networks are operated on the first of the indicated frequencies. And it turns out that the more devices operate at 2.4 GHz, the worse the connection can be. Residents of apartment buildings should know this firsthand.

5 gigahertz is used less often, as a result, it has less interference and better connection quality. Nuance. for the operation of the specified frequency, a mobile or stationary device must support it (a good example is ASUS RT-AC66U / B1).

After everything is checked, you can start digging into the settings.

How to increase the speed of the Internet through a Wi-Fi network of a router: 7 real ways

Routers are not just popular today: they are a must-have in every home and office. After all, users with them gain not only a stable connection with the World Wide Web. The main thing is that this connection is also of high quality, and ideally super-fast.!

But what if the provider provides a speed of 100 megabits per second, but via Wi-Fi it barely reaches the 20-30 Mbit mark per second? It’s time to start using these far from superfluous megabits, and for this you need to figure out how to quickly and accurately increase the speed of WI-FI functioning on modern and not very models of routers.

WPA2-PSK security standard with AES encryption aLGorithm

You should not use the outdated WEP or WPA / TKIP: they can significantly “slow down” the speed of the wireless Internet. Even if you switch to 802.11N, but do not change this parameter, you will not be able to increase the speed on any router model. In addition, this standard provides a high degree of security by working in tandem with a block cipher aLGorithm called AES.

To change these parameters, you will need:

  • go to the device settings (how to do this is described above);
  • select “Advanced settings”;
  • go to the security section;
  • set: network authentication. WPA2-PSK, encryption. AES.

Click on the “Change” button at the bottom of the screen. Parameters take effect after restarting the device.

Enabling WI-FI MultiMedia (WMM)

After 802.11N is connected, in order for the Internet to reach record heights in speed, you need to activate WMM. This parameter goes in tandem with QoS (quality of service) and is well suited, for example, for streaming video.

WMM is connected in the Wi-Fi settings. For this you need:

  • go to “Wireless mode”;
  • click on “Advanced settings”;
  • click on On opposite the inscription WNN.

WNN is also required to support a wireless PC adapter. You can connect through: Settings. Properties. Advanced.

Setting the transmitter power

When manually configuring the wireless network, you need to select the value not to the maximum, but the optimal number. This can be done in the aggregate interface (e.g. Archer 17):

  • setting up a wireless network;
  • signal strength;
  • gradually decrease the value.

You need to stop when, at the farthest point of the room / apartment / office, the laptop or smartphone ceases to “see” the network. After that, you need to increase the transmitter power by one division and you can use Wi-Fi at optimal settings.

The maximum power value will automatically stand, but if the device is located directly next to a PC or laptop, this may lead to losses or a weak signal. Yes, and an extra temptation for neighbors And if the router settings do not provide for the replacement of this value, it is worth increasing the distance between it and the gadgets that receive an Internet from it.

To summarize: to increase the speed of Wi-Fi on the router, you will need to set:

After all the actions, it is important not to forget to restart the unit. The procedures described above will significantly speed up the pace of the Internet via Wi-Fi and will make it possible to productively use the capabilities of both budget and more expensive devices.