How to connect an epson printer to Wi-Fi

No pin code

So, if your printer has an LCD display that allows you to control the device, then go through the first three menu items as in the instructions above, and then select “Connect using the WPS button”.

connect, epson, printer, wi-fi

If not, press the “Wi-Fi” button on the device panel.

Next, the printing device will scan the wireless networks around it and try to connect to any of them. The LCD screen will display information about the next step of the setting, and the light will start flashing.

Then you will need to turn to the router. the omnipotent distributor of the wireless Internet of your home. Typically, there is a button labeled WPS or, more rarely, QSS on the right side of the rear panel of this device. Press it and the Wi-Fi router will figure out that the printer requiring access is a friendly device, and not your downstairs neighbors craving free Internet at someone else’s expense.

If everything went well, the indicator light will stop blinking and turn green. This is a direct signal that you can start typing without worry. If the orange color is on, this means that there is no connection, and the surest step here is to check the functionality of the router itself.

Connecting with SSID

How to connect Wi-Fi on a printer Epson L355, Epson L366 and other similar models:

  • First, go to the printer settings. It is not difficult to find them. they are indicated by the symbols of a screwdriver with a key and the inscription “Setup” on the top.
  • Then we select the line “Wi-Fi Settings”.
  • Click on “Wi-Fi Connection” (“Wi-Fi Setup”)
  • From another menu that appears, take the option “Wi-Fi Setup Wizard”.
  • You will see a list of Internet access networks that the Epson L355 was able to detect using the Wi-Fi module in the nearest radius. If you do not remember the name of your network and cannot choose the one you need, then look at its name on your other devices connected to the Internet. They all have settings for connecting to wireless networks, so it’s easy to find out the data you need.
  • Then you will need to enter a password. If you don’t remember him either, you can refer to the point above, there is also a chance to find out the necessary data.

If all of the above steps are successfully completed, then the result will not be long in coming. the light signal above the “Wi-Fi” inscription located on the front of the printer will immediately turn green. This means that the printing device is successfully connected to the network.

Installation and preparation for connection

Before you take your Epson L355 and figure out how to connect it via Wi-Fi, you should prepare the printer itself according to the setup instructions that came with the device. In short, before turning on, you need to fill the continuous ink supply system on the right side. There will be four small squares in which you need to pour paint from the corresponding bottle. They are usually sold specifically for a specific line of printers.

Then we plug the printer into a power outlet and turn it on using the button on the left side of the control box. The printer will start its diagnostics and report its end by flashing the light. Usually the process does not take more than 1-2 minutes.

If you are planning to connect your printer to your computer or laptop, it is worth checking for the correct drivers for your printing device. As a rule, they come with the printer on disk. And if the installation disk is missing, then it doesn’t matter. just go to the manufacturer’s official website and download the necessary files yourself.

Immediately, we note that the Epson L366, L355, L805 models do not differ in functionality, so the instructions for setting them are similar. The updated models L3050, L3060, released at the end of 2017, also differ little from their predecessor L355, except that they became narrower. The setting of these models is also similar with connecting the Epson L355 printer model.

On Epson L366 or any other similar model, Wi-Fi setup can happen in two ways: using the SSID or not. For the first method to work, your device is equipped with a small LCD screen through which all operations will be carried out.

For video lovers. instruction “How to connect Epson printers to a wireless network?”:

Epson L355, L366 and others: how to connect to Wi-Fi, correct printer setup

Adequate) goes well with a wide range of functionality. It’s not just about conserving ink and printing at 33 sheets per minute. Epson L355 printer is easy to connect and use.

The device is equipped with a Wi-Fi module, which makes it a network printer that allows you to print from phones and laptops. The main requirement is that Epson Wi-Fi and the gadget must have a connection to the same network.

Connection without SSID password

You will say: this is all, of course, great, but what about the second method? Here there is a division into two ways: through a small screen of the printer or without it. The difference between them is not serious, so further we will describe both methods at the same time.

With pin code

If the router does not have a WPS quick connection button, do the following (for example, a TP-Link router):

  • We are looking for an 8-digit pin code on the printer, which is indicated on the sticker.
  • We go to the router interface. To do this, in the search engine, enter the address indicated on the router. There is also a username and password to enter the settings (if you have not changed them to your own).
  • Go to the WPS section, press the button for adding a new device and enter the pin code that is indicated on the printer.

If you have questions or find an error in the text, our instructions seemed incomplete or incomprehensible to you, let us know! Leave your comments and we will try to answer your questions! Your comments will help us to make better material in the future.!

Universal interfaces

Printing devices were connected using the I / O interface or LTP port. Most models now transfer data via Wi-Fi. Accordingly, it is required not only to correctly configure the wireless network, but also to connect a printing device through it. Usually, the kit includes an installation disk, the same can be done with the “Control Panel” when added manually. For these purposes, drivers will be required, this is a low-level software and hardware that provides interaction between a computer and a printing device.

READ  Test print for epson color printer

Wireless connection. a new interface with its own characteristics

The latest trends in OS updates are related to the fact that the operating system itself updates drivers via the Internet, recognizing the connected device. But this applies to more models connected by cable, if there is no corresponding software interface. The system detects and connects them practically without user participation. In our article, we will figure out how to connect an Epson printer to a computer, taking into account the new capabilities, in particular, via WI-FI. Such a model could be, for example, the L355. The brand also released an automatic wireless network installation system.

Instructions on how to connect an Epson printer

Modern printing devices are created within the framework of the “plug and play” concept, so their initial installation takes a minimum of time, does not require special knowledge, and will not lead you to a dead end. The easiest way to plan your steps is to take the instruction manual that came with the package and follow the recommendations.

What if you don’t know how to connect the printer to your laptop? First of all, users’ problems arise when it is necessary to turn on the printing device wirelessly via Wi-Fi. Confusion manifests itself as a result of a misunderstanding of where to configure the device and in which interface to include. The instructions included in the kit will help to deal with your model. Otherwise, you can use our description and manufacturer’s recommendation on his website.

Objective: start a modern printer

To understand and run a modern PU, you need to imagine the process itself quite clearly and know its principles. They are as follows. Before you connect your Epson printer via WI-FI and you may have to understand the principles of connecting external devices. This is necessary not only for external development, but also to quickly understand the problem.

To begin with, a small excursion into history. The invention of the computer is an achievement of the last century, but they suffered from one significant drawback, all parts and functional units were unique for each model. The computers themselves were supercomputers. The introduction of the automatic printing facility was predetermined by the release of the IBM System / 360. This mainframe is the first general purpose machine. Its device was distinguished by the presence of software and hardware interfaces, which provided the connection of various elements using a single integration interface.

Epson connection to Windows 7, 8: wireless and normal

The installation of a printing device in Windows 7, 8 can be done in two ways via a wired connection, usually USB, and using Wi-Fi, if the model supports a wireless connection.

When turning on via USB, it is enough to insert the cable into the ports of the laptop and the printing device and run the installation disc that is included in the kit. This firmware-type software product completely configures the parameters without user intervention. If the program encounters conflicting settings, the installation will display a warning message.

If you do not have a disk, you will need drivers for the PU. When turned on, they can be loaded automatically with the conditions that there is a Windows boot disk or an Internet connection. The system will configure the connection itself. Otherwise, you will have to find the driver (on the Internet or a service center) and directly indicate the path where it is located.

You can perform these operations without an installation disc. Use one or the other.

  • Insert the cable into the USB connector, when connecting to the Internet, the system will automatically configure the connection;
  • An icon for connecting a new USB device will appear in the lower right corner in the panel, where explanations about the connection will be given, for example: initializing a new device, searching for drivers, setting up a connection;
  • If you get a message about the successful connection of the control panel, try printing a test page;
  • If there are difficulties, check the print queue or restart the PU connection service to initialize.
  • Go to the Control Panel, the menu is on the right in the drop-down window when you click the button with the Microsoft logo in the left corner of the screen;
  • In the Configure Computer Settings window, go to the Hardware and Sound window, then to View devices and printers. The connected CPs will be listed here, if they are not expected, for these cases a virtual printing device is used, which allows you to make, for example, pdf files;
  • Click on the right mouse button and go to the “Add Printer” menu;
  • The system will offer to choose from two options: a local PU and a network one, including one connected wirelessly (WI-FI, bluetooth). Make a choice and follow the prompts of the system;
  • When choosing a local connection, you need to select the type of port: usually LTP1 is used in older models or USB in newer ones. Then the system will prompt you to specify the location of the drivers. If not, click the “Windows Update” button to automatically download from the Internet, can also be found in the catalog for your model. If there are drivers, the device will be easily connected (look at the photo);
  • When choosing a network connection, including one that works over Wi-Fi. To add, you need to set the network parameters so that your laptop “sees” it on the network. If autodetection is done correctly, then you need to connect the drivers, as in the case of the local device. PU will be successfully added, which can be checked by printing any test page (see the sequence in the screenshots).

Connecting a wireless printer (L366, L355) to your home and office network

Now let’s figure out, for example, how to connect an Epson l366 printer to WI-FI. Usually, setting up a network connection involves choosing an interface, in our case, wireless Wi-Fi, as well as setting the IP address in the home network (192.168.0.7, where “7” is the PU address in the personal network) and the subnet mask (255.255.255.0). This also implies connecting a network router, for example, an ADSL (modem) with the address 192.168.0.7. At the same time, do not forget to filter devices by MAC address and remove it from public access.

The master installer takes over these processes. What’s good about Epson is that there is an automatic CP installer in the Wi-Fi Protected Setup (WPS) wireless network, the security settings will be configured in accordance with SecureEasySetup (SES).

For correct automatic connection, use the proprietary instructions posted on the Epson website at the link.

Connecting Epson L366, L355 and other models to Windows 10

Now Epson in all operating systems is carried out according to a similar aLGorithm, this is described for previous versions. The only difference is the conceptually different interface of version 10, as well as the connection wizard does almost everything on its own, removing the need for the user to set parameters.

This has its pros and cons, however, when installing yourself, especially a network printer, you have the opportunity to set unique security settings. Note that Windows 10 is positioned as a highly secure system. You have the opportunity to try it out in practice.

To learn more

Once the printer is connected to a Wi-Fi network, you can start printing:

Information about non-Apple products or independent websites not monitored or verified by Apple is provided without recommendation or approval. Apple is not responsible for the selection, operation, or use of third party websites or products. Apple makes no representations about the accuracy or reliability of third party websites. Contact the seller for more information.

If your printer has a built-in display

with a touchscreen or other built-in display (control panel) typically expects you to use that display to select or enter your Wi-Fi name and password. See your printer documentation for details.

Cannot find printer

There is a possibility that Windows cannot find the printer for some reason. If you encounter this problem, here are a few steps to fix it in no time.

  • First you need to open Cortana by pressing the Windows Q key
  • Now enter “printer”
  • Select “printers and scanners”
  • Click “Add Printer or Scanner”
  • Now select ‘the printer I want is not listed’
  • Select “Add Printer Bluetooth, Wireless, or Network Discoverable”
  • Now select the connected printer
  • This should connect your wireless printer to Windows.
  • If you still cannot find the printer, make sure that both your Windows and the printer are turned on and connected to the same local area network.
READ  Which color printer is better laser or inkjet

HP printers. Wi-Fi Direct Printing

Wi-Fi Direct and HP Wireless Direct provide a direct wireless connection between your printer and a mobile device or computer without a router.

Most HP wireless printers use Wi-Fi Direct, an industry-standard connection type developed by the Wi-Fi Alliance (in English). HP Wireless Direct. is a technology developed by HP and used in most wireless printers released between late 2011 and mid 2014. If your printer uses HP Wireless Direct, go to Printing with HP Wireless Direct for more information.

Review this table to learn about the differences between the two connection technologies.

Maximum number of simultaneous device connections

Printer name that appears when printing or connecting

The wireless computer or device can automatically detect and connect to the printer

Yes: automatic or manual (button / PIN)

The computer or device can connect to the printer and the Internet at the same time

Android devices and Windows 10 or 8.1 PC

Devices can connect to the Internet and / or to each other through a printer

The printer can connect to the Internet through the device

Printer IP address (for accessing the printer’s Embedded Web Server)

Automatic and manual settings

You need to connect to a printer before selecting and printing a document or photo

The “xx” in the Wi-Fi Direct name or HP Wireless Direct name is a two-digit code unique to the printer.

Method two. use the SSID password

A fairly simple way to connect to Wi-Fi, but it works only in one case. if the printing device is equipped with an LCD screen. So, you need:

go to the menu “Wi-Fi connection setup”;

go to the sub-item “Wireless Network Setup Wizard”;

  • find your network in the displayed list;
  • enter the SSID password (be sure to be case sensitive!).
  • If everything is done correctly, the Wi-Fi icon on the printer will turn green. Our congratulations! You connected Wi-Fi yourself using the SSID password.
  • Connecting your wireless printer

    This solution will look at a wireless printer or multifunction printer. Solution steps should work for most direct-attached wireless printers.

    Step 1: Connect your printer to Windows

    • Open Cortana and press Windows Key Q
    • Now enter “printer”

    Step 2: select printers and scanners

    • Now you need to turn on the printer.
    • Check the manual to connect the printer to your Wi-Fi network, Your Wi-Fi should be active at this point.
    • Now click on “Add Printer or Scanner”.
    • Now select your printer from the results showing
    • . Finally, click on “Add device”.
    • Everything is now ready. Enjoy wireless printing.

    If the printer uses Wi-Fi Protected Setup (WPS)

    If your Wi-Fi router is not manufactured by Apple, check your router documentation for how to add a WPS printer.

    If your Wi-Fi router is an AirPort base station:

    • Open AirPort Utility, located in the Utilities folder in the Applications folder.
    • Select a base station in AirPort Utility, then enter the base station password if prompted.
    • From the menu bar select “Base Station” “Add WPS Printer”.
    • Select First Attempt or PIN as the allowed WPS connection type. Then click “Continue”.
    • If you selected First Attempt, press the WPS button on the printer. When the printer’s MAC address appears in AirPort Utility, click Done.
    • If you selected PIN, enter the printer’s PIN, which should appear in the documentation for the printer. Then click “Continue”. When the printer’s MAC address appears in AirPort Utility, click Done.
    • Close AirPort Utility.

    How to connect a printer via Wi-Fi

    Many modern printers and MFPs, for example, the common Epson and Canon models, support Wi-Fi connection. i.e. the printer connects to your wireless network (Wi-Fi router) and becomes available for use on all devices that are connected to the same router, which is very convenient.

    Connecting office equipment via a wireless network is usually not difficult and manufacturers offer their own programs and applications for mobile phones (and sometimes you can do without them) that make it easy to connect a printer via Wi-Fi. Below are examples for common brands.

    How to connect an MFP or Epson printer via Wi-Fi

    Connecting Wi-Fi-enabled Epson printers of common models (L3050, L805, L366, L486, L4160, L6160 and others) is very simple.

    Connect your computer or laptop to the same wireless network that the printer will be connected to, then follow these steps:

    • Go to the Epson.sn website, enter your printer model in the search box and press Enter.
    • Click on the item “Settings”, and then. “Download”, the proprietary program Epson Install Navi will be downloaded, allowing you to easily make subsequent settings. Run it.
    • At the first stage, the program will download and install the necessary drivers, and then it will offer to set up a connection to the printer. Select “Wi-Fi Connection”.
    • Further, all instructions will appear on the screen. you will need to press the Wi-Fi button on the printer, wait for the indication, after which your computer will “find” the printer and send it the Wi-Fi connection parameters to connect to the router.
    • If you have problems at step 4 and the connection failed, try again to select the Wi-Fi connection, but using the WPS button on the router (instructions will appear in the program). See What is the WPS button on a Wi-Fi router.
    • If this method does not work either, you can connect to the printer via USB and after that configure the wireless connection settings using the same program.
    • At the final stage, if you wish, you can set a static IP for the printer by choosing manual configuration of the IP address instead of DHCP (in some cases it may be useful). Specify an address that is on the subnet of your router (for example, if the router’s address is 192.168.1.1, you can specify something like 192.168.1.100).

    This completes the connection (you will be prompted to download additional Epson programs, optional) and you can work with the printer via Wi-Fi.

    The rest of the computers on the same network, as well as mobile phones with the Epson iPrint application installed, usually automatically find the printer, but for computers I recommend repeating the installation of the drivers (to be able to configure printing, as well as scanning over the network if you have an MFP).

    How to connect a Canon printer via Wi-Fi

    For Canon printers and MFPs, in general, there are the same Wi-Fi connection methods (I recommend using the second one):

    I hope this tutorial helped you connect your printer via Wi-Fi. If something does not work out, leave comments. perhaps there is a solution.

    Printing from a mobile phone or tablet

    The iPrint app is used to connect and print to smartphones or tablets. The iOS version can be downloaded from the App Store, the Android utility is available on Google Play. The program is free for both mobile platforms. Windows tablets use the same setup system as computers.

    Advice! In mobile gadgets running iOS (iPhone or iPad), you can print documents without installing an application. For this, a standard interface and Air Print technology are used.

    Printing from a computer or laptop

    Insert the driver disc and run the installation file. If there is no disk, the utility can be downloaded from the official Epson website. When installing the application, select “Wi-Fi Connection” to add a network printer. You can also install the driver through the Windows Control Panel, in the “Devices and Printers” menu.

    READ  What to do if the printer does not work

    Epson L355, L366 and others: how to connect to Wi-Fi, correct printer setup

    Adequate) goes well with a wide range of functionality. It’s not just about conserving ink and printing at 33 sheets per minute. Epson L355 printer is easy to connect and use.

    The device is equipped with a Wi-Fi module, which makes it a network printer that allows you to print from phones and laptops. The main requirement is that Epson Wi-Fi and the gadget must have a connection to the same network.

    Connecting with SSID

    How to connect Wi-Fi on a printer Epson L355, Epson L366 and other similar models:

    • First, go to the printer settings. It is not difficult to find them. they are indicated by the symbols of a screwdriver with a key and the inscription “Setup” on the top.
    • Then we select the line “Wi-Fi Settings”.
    • Click on “Wi-Fi Connection” (“Wi-Fi Setup”)
    • From another menu that appears, take the option “Wi-Fi Setup Wizard”.
    • You will see a list of Internet access networks that the Epson L355 was able to detect using the Wi-Fi module in the nearest radius. If you do not remember the name of your network and cannot choose the one you need, then look at its name on your other devices connected to the Internet. They all have settings for connecting to wireless networks, so it’s easy to find out the data you need.
    • Then you will need to enter a password. If you don’t remember him either, you can refer to the point above, there is also a chance to find out the necessary data.

    If all of the above steps are successfully completed, then the result will not be long in coming. the light signal above the “Wi-Fi” inscription located on the front of the printer will immediately turn green. This means that the printing device is successfully connected to the network.

    Configuring WI-FI Epson L366

    Due to the widespread use of the Internet, a unique opportunity has appeared to work with all kinds of devices in remote access. These devices include a printer. If you configure it correctly, you have the opportunity to remotely send photos or text documents that will queue up and print without your direct presence near the device. True, in order for all this to become possible, you will need to configure WI-FI epson l805.

    First, you need to configure the router itself. It is enough to take the instructions for it. In order for the printer itself to work properly, you just need to install the appropriate drivers. They often come bundled with the device itself on a separate disc. Connecting epson l805 via WI-FI can be considered complete after the router is configured.

    With pin code

    If the router does not have a WPS quick connection button, do the following (for example, a TP-Link router):

    • We are looking for an 8-digit pin code on the printer, which is indicated on the sticker.
    • We go to the router interface. To do this, in the search engine, enter the address indicated on the router. There is also a username and password to enter the settings (if you have not changed them to your own).
    • Go to the WPS section, press the button for adding a new device and enter the pin code that is indicated on the printer.

    If you have questions or find an error in the text, our instructions seemed incomplete or incomprehensible to you, let us know! Leave your comments and we will try to answer your questions! Your comments will help us to make better material in the future.!

    Printing from a computer or laptop

    Insert the driver disc and run the installation file. If there is no disk, the utility can be downloaded from the official Epson website. When installing the application, select “Wi-Fi Connection” to add a network printer. You can also install the driver through the Windows Control Panel, in the “Devices and Printers” menu.

    Connecting printers of the Epson line on the example of L355 via Wi-Fi to a local network

    Modern Epson L-series models (for example, L355) have a built-in radio module. It allows you to connect your device to a local network using Wi-Fi. You can print to a network printer from any computer, tablet, or mobile phone. The only condition: the gadget must be connected to the same network as the printer.

    Establishing a Wi-Fi connection

    A wireless LAN connection is established using Wi-Fi Protected Setup (WPS) technology. It allows you to add a new network device in one of two ways:

    • By pressing buttons on the printer and router;
    • By entering the PIN-code in the administrative panel of the router.

    In the first case, just press and hold the “Wi-Fi” button on the front of the Epson MFP for three seconds. When the first two LEDs start to turn on alternately, press “WPS” on your router. If the connection is successfully established, the indicator mode will change. They will turn on and off at the same time.

    If your router does not have a WPS button, use the second method to connect to the network. Check the PIN on the bottom of your Epson printer. The required code consists of eight digits, separated by a hyphen into two blocks of four characters. You can find it in the last line of information on the sticker, under the serial number and MAC address of the Epson MFP.

    Open the web interface of the router in any browser. Standard login information can be found on the sticker at the bottom of the device. To go to the administrative panel, enter the specified IP in the address bar. In the authorization window, enter the username and password for the router. Go to the “WPS” section and click on the link to add a new device. Enter the PIN-code specified in the previous step.

    Note! In some models of routers, this menu may be called “QSS”. It is also possible to use the full name: Wi-Fi Protected Setup.

    Setting up Wi-Fi printing

    When the Epson printer is connected to your local network, proceed to installing the software on the devices you will be printing from. For Windows computers or laptops, install the printer driver included in the package. You can also use the built-in system tool to find software. On mobile devices, use the “Epson iPrint” application.

    Connecting the Epson L355 for the first time

    Prime the continuous ink system located on the right side before using for the first time. For this, the set comes with four bottles of ink of different colors. Detailed step-by-step instructions can be found on the insert, which is also included in the package.

    After refueling the printer, plug the power cord into the rear panel. Plug the cable into the socket and press the power button located on the left of the control box. The Epson will run the diagnostics and indicate that it is complete by flashing the LED. This process usually takes no more than 1-2 minutes.

    Important! After the first refueling, you need to start cleaning the printheads of the printer. To perform this action, press and hold the far right button for 4-5 seconds.

    Printing from a mobile phone or tablet

    The iPrint app is used to connect and print to smartphones or tablets. The iOS version can be downloaded from the App Store, the Android utility is available on Google Play. The program is free for both mobile platforms. Windows tablets use the same setup system as computers.

    Advice! In mobile gadgets running iOS (iPhone or iPad), you can print documents without installing an application. For this, a standard interface and Air Print technology are used.

    NNCXV.INFO 2021