How To Connect Brother Printer To Laptop

How to connect your brother printer to your computer

How to connect your brother printer to your computer

Wi-Fi connection

Perhaps the most convenient way if you have multiple devices (not only computers and laptops, but even smartphones and tablets).

Connecting to a Wi-Fi network is divided into 2 options:

How to install a printer without a disk?

If there is no installation disc, you need to find the Corresponding drivers. Drivers are best downloaded from the websites of official manufacturers. You can download drivers from other sites, but in this case you run the risk of facing a virus attack or the action of third-party programs.

How To Connect Brother Printer To Laptop

How to connect a printer to a computer?

Option names and settings differ for different printer models, but this guide will help you understand the basic principles with which you can independently connect the printer to a computer. We will look at the 2 most common options today: using Wi-Fi or a classic USB cable.

Installation of drivers on modern OS (Windows 7 and higher) is most often done automatically when a device is detected.

If this did not happen, then install the drivers and software from the included disk or download them from the manufacturer’s official website.

Links to the most common firms:

How to connect a printer to a computer?

Previously, the printer was connected via the LPT port. Over time, the use of this port for connecting a printer was discontinued. Today all modern printers are connected via USB. The printer can be connected to this port when the system unit is turned on.

Driver Installation

HP Smart Install is available for select devices. In this case, you can connect the printer to your computer or laptop via USB and the installer will automatically start. Choose a Wi-Fi connection and follow the wizard’s prompt. HP Smart Install configures the wireless connection on the printer and the USB cable can be disconnected (by the installation wizard).

You can find out if the HP Smart Install function is available in the instructions for your device. If the device does not support this function, then the software for the device is required. It can be downloaded from Printerprofi.Ru or from the website of the manufacturer of printing equipment. How to download drivers from Epson official website and Hewlett-Packard.

Do NOT connect the device to your computer yet. Download the driver (preferably full), run it and follow the prompts on the screen. During the installation process, the wizard will prompt you to select a connection type. Choose wireless over Wi-Fi. Follow the prompts and enter your network information (SSID and password) if necessary. This option is discussed in more detail in the article on setting up the HP LaserJet Pro P1102w over Wi-Fi.

This method is the easiest. The printer and router must support WPS (Wi-Fi Protected Setup) for setup. You can see if your equipment works with this function in the instructions. If WPS is supported by both devices, then you need to enable this function in one of the following ways:

  • Programmatically (through the printer menu and through the web interface of the router)
  • Hardware (pressed a special button on the printer, and then on the router).

How to press, see the instructions. Sometimes you just need to press, but sometimes you need to press and DO NOT release for 2-3 seconds. For a more complete understanding of connecting a printing device via Wi-Fi to a router, see below.

Manual setting

This method is more secure than WPS. Network name (SSID) and password will be required.

Connect the printer to your network. Go to the printer control panel in the wireless settings and run the setup wizard. All available networks are searched for. We choose ours by name (SSID). If your network is NOT visible or it is hidden, you can enter the name manually. Enter the password for your network. If the data is entered correctly, the Wi-Fi light on the printer control panel will be on, indicating that the device is on your network.

We start the installation of the driver (preferably complete) for your printing device. Following the wizard’s prompts, select a Wi-Fi connection with manual settings. You just need to select a printer that is already on your network and print a test page.

Learn more about manually connecting the printer using the example of the HP LaserJet Pro M127fw below.

With the introduction of WPS

Check if your router supports this technology. If so, there will be a special button on its body, the icon on it looks like this:

  • In the printer menu, use the navigation keys to go to the wireless connections section (WLAN settings).
  • Select the connection method. WPS (In some models it is selected by default).
  • When the printer is ready to search for a network, return to the router and press the WPS button. It will need to be held for a few seconds, until the indicator light flashes (usually located next to it).
  • After that, go back to the printer, press and hold the OK button on it until the device notifies you of a successful connection (usually it takes NOT more than 2 minutes).
  • How to connect a Canon printer to a laptop

    Connecting your Canon printer to a computer or to a beech wood a few years ago was considered not very easy. In the previous one, we had to create a special port and connect to it, make sure that we have all the necessary drivers, and we configured everything correctly, and then sit and wait for our operating system to allow us to print.

    Now, fortunately, this whole procedure has become much easier and clearer. If we are going to connect our printer directly to the computer, or we want to create a new network connection to the printer, then with the development of modern technology, everything can be done much faster and easier. First of all, you need the printer to fit near the computer. It is very important that the printer is located so that the cable can easily reach the port. Before starting the procedure for connecting the printer to the computer, you need to install the necessary software, which were included with the printer. This will make it much easier to connect.

    READ  How To Connect Pantum P2207 Printer To Laptop

    How to connect a Canon printer to your laptop If you don’t have the software, don’t worry. Windows is capable of automatically detecting the printer connected to the computer Before connecting the printer to the computer, install the software supplied with the printer (to facilitate the connection process). If the software isn’t available, don’t worry. Windows can automatically detect the printer connected to the computer Follow the Windows instructions to set up the printer. Windows will automatically detect the new printer and install the required software. Check if the printer is installed correctly. Open Control Panel. Select Devices and Printers. Find the connected printer in the list.

    How to connect a Canon printer to a laptop If you cannot install a printer, download the latest drivers for your printer model from the manufacturer’s website. this will solve the problem with installing the printer.

    Place the printer near the computer. Make sure the printer is so far from the computer that the cable can easily reach the port. Before connecting the printer to the computer, install the software supplied with the printer (to facilitate the connection process). If the software isn’t available, don’t worry. Mac OS is able to automatically detect the printer connected to the computer. Connect the printer to your computer using a USB cable. Connect directly to a USB port, not to a USB hub (hub). Make sure the printer is plugged into an electrical outlet and turned on.

    Follow the instructions of the Mac OS System Printer Devices. Mac OS will automatically detect the new printer and install the required software. Check if the printer is installed correctly. Open the Apple menu. Select Printers Scanners. Find the connected printer in the list.

    If you do not know how to connect a laptop to a Canon printer, download the latest drivers for your printer model from the manufacturer’s website. this will solve the problem with installing the printer. To install a printer that can be accessed by any computer on the network, go to the first subsection. To provide network access to the printer, connecting to a Windows computer, go to the second subsection. To provide network access to the printer, connecting to a Mac OS computer, go to the third subsection. Check the Possible Network Connections in your printer. Many newer wireless printers have Ethernet ports. If your printer is not one of them, you need to either connect it to your computer and share it on the network, or connect it to the print server (a small device through which you connect to the network and to which you need to connect the USB printer cable).

    Place the computer where it can sense the wireless signal. The printer must be able to sense and send signals to the wireless router. If you are connecting your printer via Ethernet, you need to connect it to your router. This means that you need to position the printer so that it can be easily connected to the router. Turn on the printer. Follow the instructions on the screen to connect the printer to the network.

    For more information on network settings, read the instructions that came with your printer. If you do not have instructions, find them on the printer manufacturer’s website. Some printers must be connected directly to the computer to be able to connect to a wireless network; other printers let you set up a wireless network connection directly on the printer itself. If your printer supports a wireless network, find the network through the interface menu. Then enter the password to gain access to the wireless network.

    Driver Installation in Windows 10

    For the system to correctly process print jobs and send them to a new device connected to it, the driver software must be installed. This is necessary for the data in the printer to be correctly entered into the register of new devices. You cannot work with a new device without installing the software.

    First of all, you need to download the driver for the Epson L222 printer from the link at the top of the article. By default, they will go to the Downloads folder on your primary drive. Find the uploaded file there and double-click on it to start working.

    In the “Printer Model” tab, you must select the “EPSON L222 Series” option, check the “Use by default” item and Confirm all parameters by clicking the “OK” button.

    At the next step, select the language in which the driver program will be installed. From the drop-down list, select “Russian (Russian)” and confirm the selection by clicking on the “OK” button.

    The installation wizard prompts you to read the Epson software and device licensing agreement. If there are objections or comments to any of the points, then we mark our agreement with a dot opposite the point “Agree”. Go further by the button “OK”.

    Connect the printer using the supplied cable. The square end plugs into the connector on the printer case, and the rectangular end plugs into the USB port on the back of the system unit. Then turn on the power and wait for the program to finish setting up the printer.

    The device will be automatically installed and registered in the registry. After that, a printout of documents will become available.

    Driver Installation in Windows 10

    For the system to correctly process print jobs and send them to a new device connected to it, the driver software must be installed. This is necessary for the data in the printer to be correctly entered into the register of new devices. You cannot work with a new device without installing the software.

    READ  How To Scan From Printer To Computer

    First of all, you need to download the driver for the Epson L222 printer from the link at the top of the article. By default, they will go to the Downloads folder on your primary drive. Find the uploaded file there and double-click on it to start working.

    In the “Printer Model” tab, you must select the “EPSON L222 Series” option, check the “Use by default” item and Confirm all parameters by clicking the “OK” button.

    At the next step, select the language in which the driver program will be installed. From the drop-down list, select “Russian (Russian)” and confirm the selection by clicking on the “OK” button.

    The installation wizard prompts you to read the Epson software and device licensing agreement. If there are objections or comments to any of the points, then we mark our agreement with a dot opposite the point “Agree”. Go further by the button “OK”.

    Connect the printer using the supplied cable. The square end plugs into the connector on the printer case, and the rectangular end plugs into the USB port on the back of the system unit. Then turn on the power and wait for the program to finish setting up the printer.

    The device will be automatically installed and registered in the registry. After that, a printout of documents will become available.

    How to install a driver in Windows 10

    The Epson L222 driver is very easy to install. There are no special nuances with the installation. The only problem is the basic format of the installation file. It comes in the archive, so you first need to unpack this same archive. A hint on how to do this can be found in the corresponding article, namely. Unpacking drivers. You can just double-click on the downloaded file and the built-in Windows archiver will start. Upon completion of unpacking, run the installation file.

    Check “Use as default” and select the printer. There is only one model on the list: Epson L222, but this is not always the case. Click “Ok” and continue the installation.

    Choosing a language. Select “Russian” from the drop-down list and then click “Ok”. Little secret: you can put any language, the steps will not change from this, and the places of pressing will remain the same.

    In the window with the license agreement, you can change the language of the agreement. To whom it is more convenient to read, and exhibit. But this is not necessary. You just need to click “Agree” and click “OK”.

    We check and reconnect the printer, if required.

    Further installation has no nuances and continues without problems.

    Using the resources of manufacturers

    This method involves self-installation of drivers from the websites of manufacturers of the connected equipment. Accessing the official websites of well-known brands such as Canon or HP via a computer is absolutely safe from the point of view of the possibility of receiving malicious software.

    To find the driver you need, you just need to know the model of your printer. The exact specifications can be found either in the accompanying documentation or on the case. After the model name is found, you can start searching through the browser. As a rule, when specifying the exact name in the search bar of any browser, the manufacturer’s website will be in the first position in the list of drop-down options for various sites offering programs. Usually, but not always. Therefore, in order to exclude potential threats to your computer, pay close attention to the site where you got when you click on the link. The manufacturer’s website is difficult to confuse with any other: firstly, its name, as a rule, speaks for itself, and secondly, such a website is usually clearly structured and devoid of all sorts of unnecessary information, and not directly related to the maintenance of branded equipment.

    For example, you need drivers for an HP printer.

    • We go to the site http://www8.HP.com.
    • Through the “Support” menu we find the item “Drivers and Programs”.
    • Enter the product name or serial number in the search bar.
    • We find a list of software offered in our case.
    • We select the necessary (you may need information about the version of your OS, be prepared for this).
    • We are waiting for the package download to complete and run the file, Install the drivers following the wizard’s prompt.

    Installing drivers

    The most difficult, as a rule, is the procedure for the correct installation and configuration of drivers. If the printer was purchased recently, then in the factory box you can probably find an installation disk with the necessary information and a list of programs required for correct operation. Using the installation disk during the initial connection is the SIMplest procedure, which is at the same time the fastest setup options. But what if you were unlucky and the disc was not in the boxes? Or maybe the box itself is not there, since the printer was purchased a long time ago or was given away as unnecessary by someone from friends.

    To “get” the necessary drivers for a printer without a disk, you will need 10-15 minutes of time, a small amount of ingenuity and focus on results. There are two ways to search:

    • Through Windows tools;
    • By downloading software from manufacturers’ websites.

    Connection process

    The process of installing and configuring the printer itself can be divided into several stages:

    • Connecting the device;
    • Installing and configuring drivers;
    • Print setup.

    Initially, the procedure for connecting the printer to the laptop is best done with the power supply of both devices disconnected. It is necessary to choose the right place where the printing device will be located. It is better if this is a space, and not requiring constant release at the end of the paper output procedure. A printer, as a rule, is a rather massive device, and it is inconvenient to transfer it from place to place and is fraught with consequences associated with accidental damage to the device.

    Most often, printers are connected via usb ports, so take care in advance of the availability of free ports in your laptop so that, again, there is no need to constantly pull out the wires of the second application equipment in cases where you need to print something.

    READ  Windows 10 How To Install An HP Printer

    If the wires are connected correctly and the equipment is turned on, a message will appear on the screen about the appearance of a new device in the network, accompanied by a characteristic sound signal. If this does not happen, then, first of all, carefully once again inspect all the wires for their integrity and tight fit of the plugs to the connectors. In parallel, you can do the following: in the “Start” menu open the “Devices and Printers” window. In the window that opens, the icon of your printer should be visible.

    With the introduction of Windows

    This option, as a rule, is relevant for the SIMplest models, the functionality of which provides for elementary procedures for standard printing and scanning (if we are talking about an MFP), without the possibility of using advanced parameter settings. The Windows Update system contains drivers for the most popular models in their SIMplest version and can search for the necessary programs by itself when connecting the printer.

    If this did not happen within a few minutes after joining, then it is recommended to go the following way:

    • Open “Control Panel”;
    • Select the menu item “Hardware and Sound”;
    • Find “Devices and Printers”;
    • In the window that appears on the screen, right-click the image and click the item “Windows Update”;
    • In the window that opens, click the “Check for Updates” term and wait 15-35 minutes for the completion of the search process for all available updates, as well as their download;
    • Restart the computer and check if the printer is working properly.

    Configuring the parameters for the correct automatic installation of drivers using Windows is carried out as follows.

    • In the “Devices and Printers” menu, select “Computer” with the right mouse button.
    • In the window that appears, click on “Device Installation Options”.
    • In the next window, select the menu item “Yes (recommended)” and confirm the selection with the “Save” button.

    From this moment, if there is a stable Internet, all the necessary driver updates and other software updates will be downloaded and installed on the computer without your direct participation.

    Setting up a network printer

    You can configure the laptop’s access to a printer that is already connected to a second computer using the network printer setup function. When choosing driver parameters, you need to activate the ability to access over the network, and print from a laptop through a connection to the equipment via a network.

    The wizard is launched through the “Control Panel” of the computer. In the window that opens, add a printer via the “Add network” context menu item, after a few minutes or seconds, depending on the operating speed of the OS, the required equipment will be found. After that, you need to go to the printer settings through the shortcut that appears and enter the device’s IP address (you can find it in the instructions). After the performed manipulations, the laptop needs to be restarted, and if everything is done correctly, the printer will start its work.

    Connecting with WPS Implementation

    The SIMplest version of synchronization, a prerequisite for which is the very possibility of “Wi-Fi Protected Setup” in the functionality of both devices. On the bottom of the router, you should find the WPS icon, in the immediate vicinity of which you can find the pin code required for configuration. The next step is to configure the router through the system menu.

    • To do this, go to the web interface through any browser, typed the path 192.168.0.1 or 192.168.1.1 in the address bar, depending on the device model, and find the Device PIN term, where the pin code is entered, mentioned just above.
    • Make sure there is WPA / WPA2 protection and disable MAC filtering.
    • If the printer has a button that activates WPS, press it and wait for the wi-fi system equipment to complete the search process.
    • Because of “Printers and Faxes” we find the device we need and open the context menu, where we put a daw opposite the “Use by default”.

    Connecting the printer to the laptop

    Connecting a printer is a fairly SIMple procedure, and not devoid, however, of certain nuances. In this article, we will try to give the most complete overview of the process of correctly setting up the printer when synchronizing it with a laptop. The same tips are quite applicable in the case of stationary computers. there are no significant differences in the setup rules.

    Connecting the printer to a laptop via wi-fi

    With the advent of the wi-fi system in everyday life, the need for the use of countless numbers of wires connecting gadgets has disappeared. The use of a router when connecting a printer to a laptop allows you to use a mobile computer anywhere in the apartment without having to connect it with wires to the printing machine in the event that you need to display text or pictures on paper.

    Using the Connection Setup Wizard

    The connection wizard is built into the printer’s operating system and allows you to quickly and easily connect via Wi-Fi. A prerequisite will be support for the WPA or WEP protocols. For the setup itself, you will need information about the SSID of the network and the password for accessing it.

    Through the printer control panel, go to the “Settings” menu item and select “Network”. After that, the wizard, without your participation, will begin to search for all available wi-fi networks in the immediate vicinity, and a complete list of them will be displayed on the screen. If the required set is not in the proposed list, try to find it by manually entering the name. If the network is found, it remains only for security reasons to change the password to access it. That’s it, you can start using the device in working mode.