How to connect headphones to iPhone 7

3 ways to connect any wireless earbuds to iPhone

connect, headphones, iphone

Airpods and lesser-known plugs are only gaining popularity with the development of streaming and music services. But sometimes, users are faced with the problem of how to properly synchronize devices. Therefore, let’s take a closer look at how to connect wireless earbuds to iPhone. In parallel, we will consider the main problems.

The manual is universal and suitable for all iPhone models: 4, 4s, 5, 5c, 5s, 6, 6 Plus, 6s, 6s Plus, SE, 7, 7 Plus, 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max.

Simple ways

There are two ways to pair any wireless headset with an iPhone:

  • Bluetooth settings,
  • Automatically.

The process of connecting Airpods does not take much time and comes down to simple instructions:

  • First, the user must turn on Bluetooth. To do this, you need to slide your finger across the screen from bottom to top (in the locked state),
  • Click on the pictogram of the same name,
  • Turn on the device,
  • Airpods will be automatically connected to the smartphone.

If the wireless headphones are not from Apple, then the device should be connected via the settings:

  • You need to get the “plugs” out of the case and, if necessary, turn on.
  • Wait for them to connect to each other.
  • Then on the phone go to “Settings” and select “Bluetooth”.
  • Turn on Bluetooth.
  • Start searching for other devices.
  • Find the name of the gadget in the list of available devices, and start the connection.

After the headset is connected, the user can exit the settings and play music. If the device was connected correctly, the corresponding icon will be in the upper right corner of the screen. Some models transmit information about battery charging.

Pairing occurs, but no sound or poor sound

In this case, we are talking about a poor-quality headset or a sudden interruption of the signal.

If the problem is a bad signal, follow the instructions:

  • Restart headphones.
  • Disconnect the headset for about 30 seconds and only then reconnect.
  • Shorten the distance between the smartphone and the wireless headset. Long distance may interfere with the connection.
  • Disable extraneous Bluetooth devices.

One Airpod is quieter than the other

  • One of the headphones is discharged. Need to put the headset in the charging case.
  • Check that the holes are clean and not stained, and there is no debris on the screens. If there is contamination, then it is necessary to carefully clean the device with a brush.
  • Be sure to check volume settings on iPhone.

Reference! If the sound quality remains poor, you hear clicks, whistles, creaks, we recommend that you take the headset to a service center for repair.

Not determined

Sometimes Airpods, Freebuds, Mi AirDots or other branded headphones are not detected by the iPhone.

In this case, we follow the step-by-step instructions:

  • Check if Bluetooth has turned on on iPhone.
  • Restart the wireless system. turn off and then turn on the “plugs”.
  • Make sure the headset is well charged.
  • Check the compatibility of your phone and headset. In some cases (on new models of Airpods), to connect a wireless device, the operating system must be at least iOs 7.
  • Make sure that there are no devices nearby that can intercept the signal. laptop, MacBook, candy bar, another smartphone with synchronization enabled.
  • In rare cases, powerful Wi-Fi routers can interfere with connections. move to a safe distance (5-10 meters).

Connection issues after upgrade

Very rarely, there is a synchronization problem after installing a new version of iOs on the iPhone.

  • Restart Bluetooth first and re-pair,
  • Ideally, restart your smartphone,
  • Remove all major sources of interference that might interrupt or interfere with the signal.
  • Open the case next to the phone. A corresponding prompt should appear on the display.
  • Try connecting another wireless headset to your iPhone. If this does not help and there is still no connection, we recommend contacting technical support.

Doesn’t connect

The device may appear in the list of connections, but not connect. An error may appear on the display or the connection may take too long. more than 1-2 minutes. Then it is necessary:

  • Remove all devices from the “My devices” list that are no longer in use. click on the exclamation mark on the right and tap on “Forget this device”
  • Restart wireless headphones and turn off / turn on Bluetooth on smartphone.

How to connect headphones to iPhone via Lightning adapter

All new iPhone models do not have a standard 3.5mm audio jack, they only have a universal digital Lightning connector. This connector has its pluses and minuses regarding the connection of headphones to it.

The advantage of the Lightning connector: it is a digital connector, i.e. the phone sends a digital unconverted signal to the headphones, the headphones, using the built-in DAC, independently convert the digital signal to analog, this allows you to achieve stable sound quality. In this case, the sound quality of the headphones is constant and does not depend on which iPhone you connect them to, the headphones do all the sound processing on their own.

Disadvantage of the Lightning connector: we are considering Lightning in terms of connecting headphones to it, and in this case, a huge disadvantage is the very limited range of headphones that can be connected to this connector.

But it is possible to connect ordinary headphones even to an iPhone that does not have an audio input. use the Lightning adapter. It is not very convenient, but there is no other way out.

I have selected a couple of inexpensive adapters for you, I think you will like them.

Check your phone settings

Check the settings of your device and whether turn on the phone call function in automatic mode. If you haven’t enabled, go to General. Accessibility. Sound Source. Automatic.

iPhone X (s / r / max) / 8/7/6/5 can’t see headphones. wired or wireless

Now we will determine why your iPhone does not see Airpods 1/2, EarPods, or other wired and wireless (Bluetooth) headphones / headsets. We will proceed in order.

How to Connect Regular Headphones to iPhone 7 with No 3.5mm Headset Jack

This article applies to all iPhone XS / r / 8/7/6 on iOS 12 and newer. If you have an older version, the item names may differ.

Immediately advice that can help. If the headphones did not turn on (they peeped and then the sound went through the usual iPhone speakers), go to the Bluetooth settings and there, in the “Other devices” item, connect to the lightning that appears.

Don’t know how to solve a problem with your smartphone or laptop? Contact me and do not hesitate. Write to me

Lightning adapter Choetech HUB-A01

This is an elegant, simple and easy-to-use Lightning adapter for connecting traditional wired headphones to new versions of iPhones. Please note that you can simultaneously connect headphones and charge your iPhone, which cannot be done if you are using a native adapter.

How to fix iPhone headphone sound problem

Faced sound issue with iPhone headphones? Do not rush to throw them away, but first use the following instruction.

Quite often, iPhone owners have to face a problem when headphones stop working correctly. The appearance of various interference is not an indication of the need to replace the headphones, at least not always. Read our tips before buying to help you fix the problem yourself.

There are a number of reasons why headphones are not working properly.

First of all, you need to check that there are no mechanical damages on the smartphone and headphones. Remember, you may have dropped your iPhone, or it may have been exposed to water.

Try plugging and unplugging the headphones a few times with a little force. The main thing is not to overdo it. Did not help? Then look for the solution below.

READ  How to set parental controls on a child's iPhone

Then you need to make sure that the headphones are connected correctly, as the presence of a case may prevent this. It is best to remove the accessory and try to connect the headphones again.

After connecting the headphones, you need to increase the sound volume to the maximum. This very often helps to get rid of various noises.

If all the above steps did not help, then proceed to restart the iPhone. This method will help in cases when problems in the operation of the headphones are hidden in the software of the device, rebooting which sometimes also helps.

Very often, users forget to check for dust in various connectors and the same situation sometimes happens with an audio jack. Dust particles interfere with the connection to the iPhone, so you need to get rid of them. In this case, a toothpick or air compressor comes in handy. Remember that using metal objects for this purpose is strictly prohibited.

There is another rather non-standard method for solving the problem. To do this, you need to dial some common number by calling a hot line or to some company where the wait is filled with music, not forgetting to put the iPhone into speakerphone mode and connect headphones to it. While a call is in progress and music is playing, turn off the speakerphone. Audio playback will switch to headphones. Despite the rather skeptical attitude towards this method, it really helps in many cases.

We hope that you were able to solve your problem with the help of our recommendations.

Tried all methods but couldn’t solve the problem? In this case, there is no choice but to go to the service center. Choose reliable specialists who specialize in repairing Apple appliances.

iPhone does not see wired headphones (EarPods and others)

The problem with connecting wired headphones is most often associated with various physical problems. And first of all, you should check the 3.5 mm MiniJack connector through which the connection is made. It is noteworthy that in the iPhone 7/7 Plus and newer, the headphones are connected via a lightning connector, therefore, you need to inspect it. By the way, ordinary headphones can also be connected to the latest iPhones, for this you need to use an adapter.

Smartphone not paired with Bluetooth headset

Make sure that the connection between the headset and the smartphone is established. It is possible that the audio signal is transmitted to other devices and the iPhone 7 does not see the headphones

Switching the system language from Russian to another language

You can switch the system language of the device from Russian to another and then restart the device. If iPhone returns to normal, change the language to Russian.

Wireless earphone instruction for iPhone

We discussed the theory, now, in practice, we will describe in stages how to connect a wireless earphone to an iPhone. Curiously, the wireless headset connection algorithm is common to almost all Apple devices and iPhone versions.

  • turn on the headphones;
  • we activate on them the ability to connect to a previously unknown device (usually by pressing a button and holding it for more than two seconds);
  • when the headphones become open for searching, turn on the power.
  • expect the blue indicator to flicker.

If the indicator refuses to blink, we use a special key on which you can see the Bluetooth designation. In some cases, you have to use the headphone power button. In this case, you will need to hold the specified button.

  • Important: it is necessary to achieve exactly blue blinking from the indicator.

Disconnecting wireless headphones from iPhone

There are two ways to disconnect wireless headphones from the iPhone:

Perform all actions in reverse order:

  • turn off sync;
  • turn off Bluetooth;
  • turn off the power on the headset.

Use the line in the headphone window “Forget this device”, clicking on which deletes the connection data, and then turn off the gadget itself.

Step-by-step pairing instructions

Before connecting wireless headphones to your iPhone via Bluetooth, you need to make sure they are compatible. Things are simpler with the headset from the “apple” manufacturer, because they are mated in 100% of cases. In addition, they are compatible with most other non-Apple mobile devices. They all connect in about the same way. To do this, follow the instructions below:

  • Turn on your headset and activate the option to let other devices see them. Usually, all this is done by pressing only one button, although it may be a key combination (depending on the headphone model).
  • In iPhone, open the main settings menu and go to the “Bluetooth” section.
  • Enable the desired function and wait until the list of detected devices appears, where the headset should be displayed. You need to tap on it. If everything is done correctly, the status “Connected” will appear. (do not forget to click on the “allow new devices connection” button, if available).
  • You will also see the corresponding icon in the status bar next to the battery level.
  • To connect Bluetooth headphones to an iPhone, the headset may require a passcode. But this should be stated in her operating instructions. Therefore, it is also worth familiarizing yourself with it. It remains only to check them for performance.

Disconnecting Bluetooth headphones from iPhone

It’s a good idea to unplug your headphones when you’re done using them to conserve battery power on both devices. There are two ways to do this:

  • Turn off the headphones or disable the pairing function on them;
  • With a gesture up the screen, open Control Center and tap the Bluetooth icon to turn it off;
  • If you need the wireless connection function to remain on, then go to “Settings” “Bluetooth”, find your headphones in the connected devices section and disconnect them with a simple touch of your finger.

What to do if only one earphone is connected

One Airpods not working.
1. Try to “reset” your Airpods. To do this, in Settings, find the Bluetooth parameter, in the list of available devices, click on the letter i next to the name of the headphones and select “Forget this device”. After that, first put the headphones in the closed case for a minute. Then first open the case, wait for the white indicator to appear, place the device with the lid open next to the smartphone and press the connect button on the iPhone screen.
2. The problem may be in the old firmware. Try updating to the latest version. You can check which one you have in Settings. To do this, you need to sequentially select: Basic. About this device. Name of the headphones.
3. Check the volume balance on the device in the audio settings. Perhaps the slider has moved to the left or right, and the sound simply does not go to one of the headphones.
4. If devices are connected but there is no sound, clean the headphones. For this, it is better to use microfiber and cotton swabs.
5. Try connecting the headphones to another iPhone and if the problem persists, contact a service center. The battery may be out of order in the headphones, or the internal wire may be damaged.
Only one headphone of any brand is connected. 1. Try to re-establish the connection by first removing the device.
2. Clean the headphones.
3. Try to connect them to another gadget to understand which device is the problem.
4. If the problem is in the phone, please update the firmware or do a factory reset.

READ  Windows 10 can't see iPhone via USB

Why the connection might not be established

For example, you do everything according to the rules, the device appears in the list of available for connection via Bluetooth, but the connection does not occur. Or your gadget doesn’t appear on this list at all. There may be several reasons for this:
1. If you turn on the headphones, but they do not appear in the list, try pressing the pairing button on them again. If this does not help, turn off the gadget and turn it on again. Then try disabling Bluetooth on your phone and enabling it again by manually searching for nearby devices. Also try to place the earbuds as close to the phone as possible, especially for the first connection.
2. If the headphones are on the list, but pairing does not work, check to see if they are already connected to another device nearby. If the connection has already been established with another smartphone, tablet, computer or TV, the second connection will fail. You need to find this device and turn off Bluetooth on it, then the connection will be cut off and you can connect to another gadget. If you do not know what kind of device it is, just turn off the headphones, place them directly next to the phone with an active network, and only then press the power button. In this case, the gadget will connect with the device that is closer.
3. Interference from other wireless devices may cause failures. Take them away and try again.
4. If the device takes too long to connect, but there is no result, click on its name in the list and select “Unpair” or “End connection”. Then restart your smartphone and try again.

How to connect Bluetooth headphones to iPad or Android

The principle of pairing devices is the same as in the previous manual. After activating the headset, turn on the wireless technology on the mobile device, find the headset and pair them.

Before connecting Apple Wireless Headphones to your phone, you should know that the Bluetooth connection is actively consuming the battery of both devices. Try to turn them off until you need them.

So, we have figured out how to connect Bluetooth headphones to iPhone. If you have any questions, you can ask them in the comments.

How to connect wireless headphones to iPhone

You can easily connect wireless headphones to the iPhone regardless of their manufacturer, it is not necessary that they be branded from Apple.

It’s easy to do this using Bluetooth wireless technology and easy configuration of its connection in the settings of your phone.

In the last article, you learned how to take a screenshot on an iPhone. Today we will talk about how to connect wireless headphones and speakers to iPhone via Bluetooth easily and quickly.

Interesting! Also, in a separate material there is detailed instructions on how to connect Airpods to iPhone easily and correctly.

How to connect wireless headphones to iPhone

Charge your wireless bluetooth headphones and press the bluetooth enable button on them.

Open the smartphone settings, go to the section with the name “Bluetooth”, set the switch of the item of the same name to the active position and wait until the headset is found and displayed in the list below.

When the device is found, click on it to establish a connection. In rare cases, a PIN may be required, it is usually located on the headset itself or its box.

Immediately after connection, the sound will work from the headphones and, if there is a built-in microphone on the device, then conversations can be conducted through it, which is very convenient.

Interesting! If you have problems with playback or with pairing in general. in the same section, do “Forget device” by clicking on it and then adding it again. This often solves the problem.

Possible connection problems

Important! There is no point in restarting your iPhone, you just delete all the data, and this will not solve the problem. If the gadget is not visible at all, and other smartphones recognize everything perfectly, then there is simply no support, you need to look at another option.

How to connect a wireless speaker to iPhone

Be sure to charge the Bluetooth speaker before pairing / pairing and press the button on it.

Go to the phone settings and open the “Bluetooth” section, make the item of the same name active to start searching for devices.

Immediately after the column appears, select it from the list, if asked to enter a password, then you can find it on the column itself or on the box from it. often it is just. 0000.

If you encounter problems and do not play music. delete the added column in the same menu by clicking on “Forget device” and then adding again.

Interesting! You can check music playback and sound quality immediately. So you can easily decide before purchasing whether you like the sound quality or not.

Thus, you can connect any wireless headset to the iPhone. These can be overhead or plug-in options from Xiaomi, Samsung, Honor or others.

Smartphone not paired with Bluetooth headset

Make sure that the connection between the headset and the smartphone is established. It is possible that the audio signal is transmitted to other devices and the iPhone 7 does not see the headphones

How to connect Airpods wireless headphones to an Android device

After the release of Airpods, many for some reason decided that they could not be used on non-Apple devices. This, of course, is nonsense: in essence, Airpods are, albeit improved, but still Bluetooth headphones. The last doubts were dispelled by the official Apple instructions, in which there was a place and instructions for using headphones with smartphones and tablets from other manufacturers:

Put your Airpods in the charging case.
2. Open the cover.
3. Press and hold the setting button until the status indicator turns white.
4. Pair with your device.

How to connect wired headphones and headset to iPhone

If you have wired headphones with a standard 3.5mm jack, just plug it into the jack you see in the photo above. Insert all the way, but you do not need to press hard, the jack should go into the socket easily and at the end you will feel a slight click.

To simply listen to music, play or watch movies, you can connect any headphones with a 3.5mm audio jack to the iPhone audio jack. But you must remember that it makes no sense to connect headphones with an impedance higher than 32 Ohm to the phone, because the power of the phone is not enough for the headphones to “play” well. If the resistance is higher than 32 ohms and you connect them to the phone, the sound will be boomy, loose, flat, and in some cases there may be no sound at all.

READ  How to use iPhone as a WEB camera

Remember: it makes sense to connect headphones and a headset with an impedance of up to 32 ohms to the iPhone.

If you want to connect a wired headset to your iPhone, you need to make sure it has the correct audio jack configuration. If you have a “native headset, then just plug it into your phone and it will work.

If you bought a new headset or are about to do so, make sure that the box clearly states that this headset is fully compatible with Apple technology. Usually the inscription looks like this: “Made for iPod, iPhone, iPad”. This is necessary in order to be sure that the microphone and the remote control, if present on the headset, will work correctly, otherwise the microphone may not work for you, and the remote control.

This is because Apple used their own type of pin layout on the audio jack, as you can see, the ground and microphone pins are swapped with each other, so if you buy a headset that is designed for Android phones, you will have sound. but the microphone will not be able to record the voice. The opposite is also true, if you connect a headset made specifically for Apple to your Android phone, the sound will go on, and everything else will not work (microphone and remote).

Damaged Lightning connector, broken audio codec

If the reason why the iPhone 7 does not see the headphones is damage to the Lighting connector, you will have to contact a specialized service. If there is no sound in the headphones and speakers, then the audio codec is faulty.

If the phone does not charge, then the reason is most likely in the Lighting connector. You can change the connector yourself, but you can’t fix the problem with the audio codec on the iPhone 7 without professional equipment.

The last reason why headphones are not displayed on the iPhone 7 is low-quality accessories.

Defective headphones

Most often, this problem occurs when using non-original accessories from China. When buying headphones, you need to carefully monitor their appearance, as well as the appearance of the packaging. there are a lot of fakes.

Thus, the problem the iPhone 7 does not see the headphones can be solved anyway

Now we will determine why your iPhone does not see Airpods 1/2, EarPods, or other wired and wireless (Bluetooth) headphones / headsets. We will proceed in order.

This article applies to all iPhone XS / r / 8/7/6 on iOS 12 and newer. If you have an older version, the item names may differ.

Immediately advice that can help. If the headphones did not turn on (they peeped and then the sound went through the usual iPhone speakers), go to the Bluetooth settings and there, in the “Other devices” item, connect to the appeared lightning.

Don’t know how to solve a problem with your smartphone or laptop? Contact me and do not hesitate. Write to me

Lightning pollution

If dirt or dust has disappeared in the connector, you need to clean it. you can do this with a toothpick or paper folded in half. The main thing is not to use metal objects for this purpose.

On iPhone or iPad

  • Click the icon in the menu bar and select Airpods or other speakers under Output device.

NOTE. Airpods will only appear in Control Center and Mac Menu when they’re ready to use and within reach.

How to connect wired headphones to iPhone 7

You bought a brand new, glossy, cool iPhone and now you want to listen to music, play games or watch movies with it, all this can be done using the built-in speakers, but very quickly you realize that you want to get high-quality sound. and for this you need to connect headphones. How to connect headphones to iPhone. answer below.

What connector does the iPhone 7 have?

Lightning was unveiled during Apple’s Special Media Event on September 12, 2012. In September 2016, the iPhone 7 and iPhone 7 Plus smartphones were presented, using the Lightning connector to connect wired headphones.

How to connect headphones to iPhone 11?

  • Go to the Home screen.
  • Open the case that contains the Airpods and place it next to the iPhone.
  • The iPhone displays a setup animation.
  • Click “Connect”.
  • If you have Airpods Pro, read the on-screen instructions.

Why headphones don’t work on iPhone 7?

As a rule, the reason that the iPhone does not see wired headphones is a faulty connector. In the case of the 3.5 audio jack, it is often clogged with dust and dirt, foreign objects and various liquids get inside. This leads to corrosion of the socket itself, or internal contacts.

How to enable headphone mode on iPhone 7?

If you don’t have the headphones with you to check, then unlock the screen and press the volume buttons on the side of the iPhone, while the volume indicator should be in the Call mode. If, when the headphones are disconnected from the jack, as a result of pressing the volume buttons, the indicator displays the mode. Headphones, then this is a failure or malfunction.

How to Exit Headphone Mode in iPhone?

How to turn off headphone mode on iPhone?

  • Reboot the device (in all incomprehensible cases I do this);
  • Mechanical damage to the socket or blockage. Inspect and clean with alcohol;
  • Turn on and off the speakerphone;
  • Press the volume buttons.

What to do if the iPhone does not see Airpods?

Close the lid, wait 15 seconds, then open the lid. Press the setting button on the case for 10 seconds. The status light should be blinking white, which means the Airpods are ready to connect.

How to connect wired headphones to iPhone 7?

Lightning to 3.5mm headphone jack adapter

Connect the Lightning to 3.5mm adapter to the Lightning connector on your iOS device, and on the other side connect your headphones to it.

What to do if iPhone sees headphones?

If your iPhone has headphone mode turned on and doesn’t turn off as usual, follow these steps:

  • clean the connector with a toothpick
  • blow dust off the nest
  • reboot the device with the headphones on
  • turn on speaker mode
  • adjust the volume
  • turn off wifi.