How To Connect Pantum P2207 Printer To Laptop

The purpose of the indicator on the printer

A printer is a device that prints information on paper. It has an indicator light. The latter can be green or red. Green means readiness, red means warning. The indicator is needed to show the device is working.

How To Connect Pantum P2207 Printer To Laptop

Purpose of the lights on the printer

A printer is a device designed to print information from electronic media on paper. Light indicators of different colors. green (“readiness”) and red (“warning”). are necessarily present on this equipment. They are intended to be reported in a healthy state.

If the red button blinks on laser printers Epson, HP, Samsung, Xerox, then the reasons for this may be the following:

  • The cartridge is incorrectly installed or missing at all;
  • There is packing material on the device parts;
  • DO NOT fully press down on the cartridge cover;
  • Incorrect operation of paper control sensors, closing the housing cover;
  • There is no connection or connection with a personal computer or laptop, the second device from which data is printed;
  • Software failure;
  • Little or no toner.

From the following list The most common problems are paper jams, paper outages, cartridge problems.

Page 44

5.2 Meaning of LED indicators

Print Data / Cartridge Information (Multicolor

Standby mode. Press the button to switch the printer from standby mode to warming up mode. Printer enters ready state after warming up.

Receiving data: The printer is receiving data from the computer, processing data in memory, or printing.

Data has been sent to the printer, but the device does not print. If the Ready light is flashing continuously without any print output, press the Cancel / Continue button to print the data currently in the printer’s memory.

Paper jam. The single red indicator is solid and the multicolor (green) indicator is flashing.

There is no media in the paper tray, or the media in the tray does NOT match the media type specified in the driver. The single red indicator and the multicolor (green) indicator will flash.

Cartridge error or toner out.

Other printer errors.

A blinking orange light in printer ready mode means the cartridge is out of toner.

The printer has an indicator, which is usually green. But if it turns red it gives the impression that it is a signal that the device is not working properly. Yes it is. A red or orange light means there is a problem that is interfering with the printer. Let’s find out what exactly can cause such a phenomenon.

How to find and fix the problem

First you need to determine the reason why the light is on. Problems can arise in the following cases:

  • The paper is too wrinkled. The device cannot capture it and print information on it.
  • Cartridge inserted incorrectly.
  • It is necessary to reset the counter of already printed sheets (make a firmware).
  • The ink cartridge may be out of ink or will soon run out.
  • Packing material remains on one of the parts.
  • Debris or foreign objects have fallen into the device.
  • The cover that blocks access to the cartridge is not properly closed.
  • The program crashed.

Pantum p2207 orange light is on. What to do if the light is still on

If all the previous methods did not help, you will have to inspect the electronic system of the device. First, try resetting the printed page counter. We do the following:

  • Connect the device to the mains.
  • Press the buttons in the following sequence: plus, plus, stop, minus, minus, stop, stop.
  • FC should appear on the device display.
  • Press the start key, then the numbers 07 should appear.
  • Press start again.
  • We are waiting for some time until the system is reset.

If the cartridge has been repaired, the wizard may not be able to fix all of the problems. Try the following:

  • We insert the cartridge into the printer and turn it on.
  • We are waiting for the Initialization to pass.
  • Now we take out the parts and glue the chip (which we took to the master).

Perhaps the printer itself will be able to tell us why it is not working. Try to print the report. Press the big button on the device and hold it for a few seconds. Then a printout will appear, where the printer will indicate the need to reflash or lack of toner. Replace the paint and reset the counter.

Most of the problems associated with a red light bulb can be solved on site, does not require specialists. You will have to resort to the help of a master if you know that one of the parts needs to be repaired or replaced. You can also contact the service center if it has not been possible to establish the cause of the problem.

Look, what is written in the computer in the status, most likely requires replacement of the cartridge. Buy a new cartridge or look for a refueling kit in which there will be a toner with a chip and refuel yourself, or, if you cannot yourself, the best option is to take it to the SC for refueling. My advice is that K. It can be difficult to find refueling kits (if you find, buy several at once), throw this printer out and buy some HP printer that works on 285m or 283m cartridges, so they will last a very long time and are cheap to refuel, expense

If you are not satisfied with the answer or not, then try using the search on the site and find other answers in the Computers category

If a red light on the printer starts to glow, it may be due to various problems with the device. To understand and find out the exact reason, you will need to examine it. The button is lit both from a banal lack of paper, and from more serious problems that require disassembly. Therefore, when independently searching for breakdowns, you will need to pay attention to various details.

Flashing light

If the light is constantly blinking red, there are several reasons for this phenomenon:

  • Toner needs to be refilled or replaced completely.
  • Manual feed mode set for printing.
  • The device cover is open.
  • Tray contains paper.
  • One of the parts is out of order (for example, a board).

You can close the lid and put the paper yourself. With other problems, it is better to contact the master.

If the light is red, do the following:

  • We check the amount of ink in the printer. This can be done in the settings. Fill the cartridge if necessary.
  • We check if all the wires are connected correctly. If you connect only power, but not connect the device to the computer, the lamp may turn red.
  • Pull out the cartridge. Inspect it for damage. Put back.
  • Examine the paper tray for wrinkled leaves.
  • Check if the printer is connected to the computer. Perhaps the reason is more than one printer cable or USB connector in the computer. Check if they work.
  • Check if there is any packing material left inside. If yes, remove it.
  • Open the cover and check the printer for debris or foreign objects. If any, Delete.
  • A possible software glitch has occurred. Try restarting both the computer and the printer. If that doesn’t work, reinstall the drivers.

ALGorithm for finding and fixing the problem

There are many possible reasons for the flashing warning light. But you can still look for problems in a specific sequence of actions. The aLGorithm for finding and solving problems is as follows.

  • Initially, you need to check the presence of sheets and a cartridge, and if they are missing, insert the sheets or insert a new cartridge into a click.
  • If the sheets were present, then you should check the mechanism for their feeding and if there is a paper jam, remove it by first pulling out the cartridge.
  • When everything is in order with the paper, it is better to immediately check the connection of the printer to the PC, if it is not there, connect the devices with a USB cable.
  • If this does not help, and the cartridge is installed, then you should check that it was inserted correctly and that the lid is closed tightly. To do this, remove the cartridge from the printer and reinsert it into a click.
  • When handling paper and the cartridge is required Pay attention to the presence of remnants of packaging material: if present, remove it.
  • After the actions taken, in most cases, the blinking disappears, but if it remains, then the problem may lie in the paper control sensors and the cover closing, a software failure. To solve it, you will need to reboot the device, and in extreme cases, replace its elements.

Such a state of printers can be observed when two indicators. red and green. are SIMultaneously lit or blinking. Act in THESE cases as follows.

  • When “warning” and “ready” are regularly turned on and off, this indicates the initialization of the device, or the cancellation of the print queue.
  • If red blinks and green is constantly on, while the printer is not working, then this indicates that the paper sheets are jammed, the feed mechanism is jammed. Solution. Clearing Paper Jams.

When, after carrying out all the proposed actions, the printer still DOES NOT print, and its indicators signal, then you can try to print a report. This is done as follows: press a large button on the printer and hold it for a few seconds. A printout that appears may indicate the lack of toner or the need to “flash” the device. Then the paint should be added, or the counter reset, using a special program.

Most of the considered reasons why a red light is on on the printer can be eliminated with your own hands, and not resorting to outside services. Insert paper neatly, and not exceed the number of sheets for your model. The best course of action would be to read the operating instructions at the time of purchase, not when a problem arises. Compliance with the rules of use is a guarantee of long and trouble-free operation of equipment.

Pantum p2207 DOES NOT print the main problems when working with this printer are fast toner consumption and a limitation of 1500 pages. It’s up to you to decide a lot or a little, before you buy a printer, evaluate your capabilities.

How much do you print in a week / month. The fact is that refueling a cartridge costs 690 rubles, if you print 500 pages, this is one pack of paper per month, then pantum is the ideal printer for you.

The main application of the Pantum p2207 is work from home, in a small volume. If you are a SIMilar printer for work, then you should look at more economical options, respectively, the cost of the printer will be higher.

There are loopholes and pantum what to do if He does not print and the toner remains, perhaps you have used up the limit, in which case it is worth using the printer’s stripping.

READ  How To Scan From Printer To Laptop

I will write about this capable in the next posts, but who can not wait to write in the comments, I will try to answer everyone in private messages, check this method and post an already confident article on this topic.

  • Chip for printing without limitations (removed the limitation)
  • Motherboard
  • Housing
  • Cartridge

Contact through the feedback form through the First.

Direct connection

How to connect any printer to a laptop, see here:

When connecting the printer to a computer via a USB cable, connect them and launch the tool for setting up Pantum M6500W connection via Wi-Fi:

  • Select the required network if several appear in the list.
  • Perform authorization. enter the password and select the type of network encryption.
  • If successful, a window will appear with connection information.
  • If an error occurs, you will see a SIMilar message.
  • Check your wireless login information and try again.

When the Pantum M6500W printer is directly connected to a laptop via Wi-Fi, users can connect to the printing device without entering a password by finding it on the network. The network name will be indicated as “Pantum-AP-XXXXXX”, where instead of XXXXXX the digits will be indicated by the MAC address.

I think our readers will NOT have any difficulties. But in any case, you can always write in the comments and ask any question!

Windows 2003/2008/2012 / XP / Vista / 7/8 / 8.1 / 10

Link: Pantum M6500 (or download drivers here)

Windows 2003/2008/2012 / XP / Vista / 7/8 / 8.1 / 10

Infrastructure mode

For cases where the router is compatible with WPS, the device is connected and configured by pressing a single key on the case without a computer:

  • To do this, press and hold the button for Wi-Fi connection on the MFP control panel.
  • Clamp WPS on the wireless router (be sure to disconnect the network cable from the router before doing this).
  • For Wi-Fi settings of Pantum M6500W, open the Start item or Control Panel “Devices and Printers”.
  • Under the address bar, click “Add Printer” (in Windows 7. “Install.”).
  • In the window that opens, select “Add network, Bluetooth or wireless.”. If the list is empty, click on the inscription below, specify the type “TPC / IP device” and enter its IP address and port number to which it is connected.
  • Select “Special” and go to the section for changing parameters.
  • Enter your details and specify the “LPR” protocol.
  • Install the drivers or wait for Windows to do it automatically.
  • Be sure to update the driver.
  • Name the MFP and share it if necessary.
  • If at the 5th step the required device is in the list, select it.
  • After installing the drivers, the printer can be selected as Default.

How to connect Pantum 6500 to a laptop

Many modern printers and multifunctional devices (MFPs) are connected to computers and laptops not from classic USB, but through wireless technologies. Wi-Fi is commonly used as such an interface, especially in offices and small businesses, where it is necessary to SHARE a general access to a printing device. Let’s consider how to connect a Pantum M6500W printer via Wi-Fi and configure it for optimal performance.

Pantum connects to the network in two ways:

  • In infrastructure mode, switching is performed via a wireless router;
  • In direct mode. the printer connects directly to the laptop via Wi-Fi.

Review and setting up printing on the Pantum MFP here:

Direct connection

How to connect any printer to a laptop, see here:

When “connecting the printer to a computer via a USB cable, connect them and launch the tool for setting up Pantum M6500W connection via Wi-Fi:

  • Select the required network if several appear in the list.
  • Perform authorization. enter the password and select the type of network encryption.
  • If successful, a window will appear with connection information.
  • If an error occurs, you will see a SIMilar message.
  • Check your wireless login information and try again.

When the Pantum M6500W printer is directly connected to a laptop via Wi-Fi, users can connect to the printing device without entering a password by finding it on the network. The network name will be indicated as “Pantum-AP-XXXXXX”, where instead of XXXXXX the digits will be indicated by the MAC address.

I think our readers will NOT have any difficulties. But in any case, you can always write in the comments and ask any question!

Many modern printers and multifunctional devices (MFPs) are connected to computers and laptops not from classic USB, but through wireless technologies. Wi-Fi is commonly used as such an interface, especially in offices and small businesses, where it is necessary to SHARE a general access to a printing device. Let’s consider how to connect a Pantum M6500W printer via Wi-Fi and configure it for optimal performance.

Pantum connects to the network in two ways:

  • In infrastructure mode, switching is performed via a wireless router;
  • In direct mode. the printer connects directly to the laptop via Wi-Fi.

Review and setting up printing on the Pantum MFP here:

Infrastructure mode

For cases where the router is compatible with WPS, the device is connected and configured by pressing a single key on the case without a computer:

  • To do this, press and hold the button for Wi-Fi connection on the MFP control panel.
  • Clamp WPS on the wireless router (be sure to disconnect the network cable from the router before doing this).
  • For Wi-Fi settings of Pantum M6500W, open the Start item or Control Panel “Devices and Printers”.
  • Under the address bar, click “Add Printer” (in Windows 7. “Install.”).
  • In the window that opens, select “Add network, Bluetooth or wireless.”. If the list is empty, click on the inscription below, specify the type “TPC / IP device” and enter its IP address and port number to which it is connected.
  • Select “Special” and go to the section for changing parameters.
  • Enter your details and specify the “LPR” protocol.
  • Install the drivers or wait for Windows to do it automatically.
  • Be sure to update the driver.
  • Name the MFP and share it if necessary.
  • If at the 5th step the required device is in the list, select it.
  • After installing the drivers, the printer can be selected as Default.

Driver Installation in Windows 10

Driver installation for Pantum M6500 is required to start working with the printer. We offer to download the software on this page. follow the link. In the downloaded folder, select Setup64 (for x64, and Setup for x32) by double-clicking and then follow the Step-by-step instructions.

In the window that appears, select the Required installation parameters. In the first field, set the language by clicking directly on it to get access to the drop-down list. In it we select “Russian” with one click. We go down below and in a SIMilar way we put the desired model near the item “Choose a printer”.

Even lower, we define the installation mode, put a marker next to “USB connection”. We study the license agreement, go to the document by the link. We put a tick “I accept the terms.” and click “Install”.

When the installation process window appears, you should wait for it to complete (the green bar should reach the end). It is recommended that no other operations start at this time. Then it will take a minimum of time and the download will take place without failures.

If everything went well, a new hardware icon. printer will appear on the desktop. To get started or make settings, just double-click on it.

Infrastructure mode

For cases where the router is compatible with WPS, the device is connected and configured by pressing a single key on the case without a computer:

  • To do this, press and hold the button for Wi-Fi connection on the MFP control panel.
  • Clamp WPS on the wireless router (be sure to disconnect the network cable from the router before doing this).
  • For Wi-Fi settings of Pantum M6500W, open the Start item or Control Panel “Devices and Printers”.
  • Under the address bar, click “Add Printer” (in Windows 7. “Install.”).
  • In the window that opens, select “Add network, Bluetooth or wireless.”. If the list is empty, click on the inscription below, specify the type “TPC / IP device” and enter its IP address and port number to which it is connected.
  • Select “Special” and go to the section for changing parameters.
  • Enter your details and specify the “LPR” protocol.
  • Install the drivers or wait for Windows to do it automatically.
  • Be sure to update the driver.
  • Name the MFP and share it if necessary.
  • If at the 5th step the required device is in the list, select it.
  • After installing the drivers, the printer can be selected as Default.

Direct connection

How to connect any printer to a laptop, see here:

When “connecting the printer to a computer via a USB cable, connect them and launch the tool for setting up Pantum M6500W connection via Wi-Fi:

  • Select the required network if several appear in the list.
  • Perform authorization. enter the password and select the type of network encryption.
  • If successful, a window will appear with connection information.
  • If an error occurs, you will see a SIMilar message.
  • Check your wireless login information and try again.

When the Pantum M6500W printer is directly connected to a laptop via Wi-Fi, users can connect to the printing device without entering a password by finding it on the network. The network name will be indicated as “Pantum-AP-XXXXXX”, where instead of XXXXXX the digits will be indicated by the MAC address.

I think our readers will NOT have any difficulties. But in any case, you can always write in the comments and ask any question!

Many modern printers and multifunctional devices (MFPs) are connected to computers and laptops not from classic USB, but through wireless technologies. Wi-Fi is commonly used as such an interface, especially in offices and small businesses, where it is necessary to SHARE a general access to a printing device. Let’s consider how to connect a Pantum M6500W printer via Wi-Fi and configure it for optimal performance.

Pantum connects to the network in two ways:

  • In infrastructure mode, switching is performed via a wireless router;
  • In direct mode. the printer connects directly to the laptop via Wi-Fi.

Review and setting up printing on the Pantum MFP here:

How to connect pantum m6550nw printer to Wi-Fi

Many modern printers and multifunctional devices (MFPs) are connected to computers and laptops not from classic USB, but through wireless technologies. Wi-Fi is commonly used as such an interface, especially in offices and small businesses, where it is necessary to SHARE a general access to a printing device. Let’s consider how to connect a Pantum M6500W printer via Wi-Fi and configure it for optimal performance.

Pantum connects to the network in two ways:

  • In infrastructure mode, switching is performed via a wireless router;
  • In direct mode. the printer connects directly to the laptop via Wi-Fi.

Review and setting up printing on the Pantum MFP here:

Infrastructure mode

For cases where the router is compatible with WPS, the device is connected and configured by pressing a single key on the case without a computer:

  • To do this, press and hold the button for Wi-Fi connection on the MFP control panel.
  • Clamp WPS on the wireless router (be sure to disconnect the network cable from the router before doing this).
  • For Wi-Fi settings of Pantum M6500W, open the Start item or Control Panel “Devices and Printers”.
  • Under the address bar, click “Add Printer” (in Windows 7. “Install.”).
  • In the window that opens, select “Add network, Bluetooth or wireless.”. If the list is empty, click on the inscription below, specify the type “TPC / IP device” and enter its IP address and port number to which it is connected.
  • Select “Special” and go to the section for changing parameters.
  • Enter your details and specify the “LPR” protocol.
  • Install the drivers or wait for Windows to do it automatically.
  • Be sure to update the driver.
  • Name the MFP and share it if necessary.
  • If at the 5th step the required device is in the list, select it.
  • After installing the drivers, the printer can be selected as Default.
READ  How To Set The Default Printer

Direct connection

How to connect any printer to a laptop, see here:

When connecting the printer to a computer via a USB cable, connect them and launch the tool for setting up Pantum M6500W connection via Wi-Fi:

  • Select the required network if several appear in the list.
  • Perform authorization. enter the password and select the type of network encryption.
  • If successful, a window will appear with connection information.
  • If an error occurs, you will see a SIMilar message.
  • Check your wireless login information and try again.

When the Pantum M6500W printer is directly connected to a laptop via Wi-Fi, users can connect to the printing device without entering a password by finding it on the network. The network name will be indicated as “Pantum-AP-XXXXXX”, where instead of XXXXXX the digits will be indicated by the MAC address.

I think our readers will NOT have any difficulties. But in any case, you can always write in the comments and ask any question!

and more models of printing devices use not only the standard wired method as a connection, but also the wireless version of integration into work. After all, the installation of Wi-Fi on the MFP allows you to more effectively use its capabilities by all employees of your office. In order to resolve the issue of how to connect the MFP to Wi-Fi, you need to do the following.

Connect the device to your wireless network:

  • Click on the “Wi-Fi Settings” menu screen;
  • Next “Wi-Fi network status”.

Next, go to your computer to further configure the printer

  • Go through “Start” in the “Devices and Printers” menu;
  • Next, click at the top in the “Add Printer” panel;
  • In the window that appears, select “Add a network, wireless or Bluetooth printer”;
  • The computer will then make a list of available devices, in which you will select the option you need. Click “Next”;
  • The necessary drivers will then be installed;
  • Next, a message will appear about the successful installation of the printing device;
  • Here you can set your default printer and print a test page.

The printer setup process will take a long time and you can start enjoying all the benefits of a Wi-Fi connection very quickly.

Connecting to a router using WPS

If the printer supports this technology, then this method is one of the easiest. Support should be indicated in the specifications of the device on the official website of the manufacturer or in the instructions that come with the printer. You can also inspect the same device externally for the presence of the corresponding key.

Now you need to check if the router supports this technology. This can be done in two ways:

  • There should be an information sticker on the underside of the case. If there is an inscription WPS, it means that such a function is present. The pin code is also indicated next to it, which is needed to connect devices.
  • If there are stickers on the router’s case at all, or if there is no such line on it, this is nothing to say. You can find out about WPS support in the web-based settings panel of the router. There should be a corresponding clause. This is how it looks on the example of a router from the manufacturer D-Link.

If this item is missing, then the router does not support this technology. The instructions for connecting via WPS are as follows:

  • Open the printer menu and go to the wireless connections (WLAN) tab.
  • We select WPS as the connection method (usually it is already selected as preferred).
  • After that, we proceed to the direct connection. Press the WPS button on the router. The corresponding light should flicker.
  • On the printer itself, click on the “OK” button. That’s it, the printer is connected and ready to work.

WPS technology is NOT secure, as with such a connection, an attacker has a much higher chance of connecting to your device than in the case of a normal connection through a set of network security keys. So in some cases it is better to connect to the printer this way. Detailed sequence of actions:

  • Open the menu with a list of Wi-Fi networks on the printer (the instructions are relevant for devices that have a display).
  • Click on the desired Wi-Fi network and enter the authorization data using the virtual keyboard.
  • I confirm.

With the correct data, the connection will occur without problems.

USB connection

The easiest way is to connect the printer to a Wi-Fi router via a USB connector. Most modern printers connect in this way without problems, but for some you have to download and install special software. Let’s consider what to do in this case, using the example of routers from popular manufacturers Asus and TP-Link. For Asus routers there is an official utility for pairing with printers. Printer Setup Utility. It is supported by devices from manufacturers such as HP, Canon, Epson. Step-by-step instruction:

  • We connect the printer and router using a USB cable.
  • We connect to the router (via LAN cable or over the air, it doesn’t matter).
  • Go to the Asus webpage and download the Printer Setup Utility app. Install and open. The program window looks like this:
  • To find the printer, click on “Next”.
  • The print device should be found immediately.

Sometimes the error “Unable to find the wireless router with the connected printer” may appear.

Most often, it is corrected by an elementary reboot of the printer, router or computer. It is also recommended that you double-check if these devices are properly connected to each other. With TP-Link routers, you need to do the following:

  • Connect devices to each other the same way as with Asus.
  • Open the official TP-Link web page and download the TP-Link USB Printer Controller utility specifically designed to pair a printer with a Wi-Fi device.
  • Launch the installation program.
  • Click on “Next”. To launch the utility after the installation is complete, check the box “Launch USB Printer Controller”. A shortcut will also appear on the desktop
  • The program window looks like this: The name of the printer should appear in the list.
  • Now, when printing from a computer, the printer will connect automatically. The main thing is that the program is running at this moment. You can configure it to start automatically with the OS boot by ticking the appropriate checkbox in the settings.

With this connection, the printer can be used with any connected devices on the same network.

Manual connection to the router using a printer

This method of connection is suitable only for the most modern models of printing devices, since you will have to configure the connection on the printer itself with the introduction of a built-in LCD display. In this case, a standard Wi-Fi connection occurs, with the choice of the desired network and the input of the security key. Step-by-step instructions on how to connect a printer via Wi-Fi using the example of a device from the manufacturer Epson:

  • Turn on the printing device.
  • On the display, go to the settings.
  • Choosing the parameters of the wireless connection.
  • Next, select the item “Wi-Fi Setup”.
  • Turn on the Wi-Fi network setup wizard.
  • A list of available networks will appear, select the desired one. You will have to enter the network security key to connect to this access point. This can be done using the virtual keyboard. Upon completion of the input, press the “Done” button.
  • If the connection is successful, the green light on the device will light up. Now you can connect to the wireless network on your laptop and use the printer.

How to find out if the printer supports Wi-Fi?

Wi-Fi support or lack of support is indicated in the specifications of the printing device. But, even if the model does not support wireless networking, there are other ways to connect:

  • Router with “Print Server” option. Such devices usually have a USB connector to which you can connect the device. Once connected, you can use the printing device from any device connected to this access point.
  • Connect the printer to a second computer, which, in turn, is connected to the router. Thus, the printing device will also be connected to the access point, and through it it will be possible to print documents directly from the laptop connected to the home network.
  • Another option is to supply additional equipment. For example, a server with an open access, which is connected to the printing apparatus through a cable. Most modern models, however, support work with wireless networks without the need to connect additional equipment.

Even the most budgetary models. For example, devices from the following manufacturers:

  • Brother
  • Samsung
  • Xerox
  • HP
  • Epson
  • Canon
  • Pantum.

How to connect a Canon printer via Wi-Fi to a laptop? Almost in the same way as second-brand printers with Wi-Fi support. directly or through a router. There are also other ways.

Connecting to a router using Ethernet

You can connect the MFP and the router directly via a LAN cable, leaving the USB connector free on the printed device. The connection is carried out as follows:

  • Insert one end of the twisted pair cable into the computer and the other into the appropriate connector on the back of the printer.
  • On the printer, click on the PrintScreen button.
  • On the laptop, open the “Devices and Printers” window from the “Start” menu. Connect a new printing device, select the local type.
  • Now you need to create a new port. Standart TCP.
  • Enter the ip-addresses of the printing device (it is displayed when the PrintScreen button is pressed).
  • Save parameters. In doing so, you need to make sure that TPR and the byte counting option are enabled.

How to Connect Printer to Laptop via Wi-Fi. Manual Connection, WPS, via USB, Ethernet and Google Cloud Print

Modern models of printed devices support the possibility of wireless connection, since it is much more convenient than a cable. How to connect a printer to a laptop via Wi-Fi? There are several basic and very SIMple ways to do this, which will be discussed in this article. But even older models can be connected via a wireless connection, which by themselves do not support Wi-Fi. You can also set up a connection to them from a laptop without a wire, but this is somewhat more complicated, since you will need additional equipment.

Connection methods. Installing drivers

Before connecting and implementing the machine, it is necessary to install the drivers supplied on the disc bundled with the machine. Better yet, go to the official website and download the latest software from there. Under no circumstances try to download drivers from third-party sites. there may be viruses. Using the Epson model as an example, let’s look at how to install drivers and connect to a wireless network on Windows 10, 8, 8.1, 7 and even on XP:

  • First, go to the official website of Epson.Sn. We register a specific model for which you need to download and install software (for example, Epson 1366, L4160, L3050, L366, etc.).
  • We select the term “Settings” and click on the “Load” button. After THESE actions, the official Epson Install Navi utility will be loaded, with which you can easily configure Epson equipment. After downloading, run the program.
  • When you first open the utility, download the necessary software for the selected model of the printing device itself, after which it will be necessary to configure the connection to the device.

Let us consider below in more detail the methods of how to connect the printer to a laptop via Wi-Fi.

Using Google Cloud Print

This connection method assumes that you can connect to your printing device via the Internet from anywhere, provided that it is connected to the computer that is currently running, for example, via a USB port. To do this, you need to use a Google account. Detailed setup process:

  • The first step is to log into your account (if it is not there. register, go to the site google.com and click on the button “Login”, then “Create an account”). We turn on the Internet browser Google Chrome (some Google services do not work on second browsers). In the upper right corner, expand the context menu, find the “Settings” term, click on it.
  • In the open parameters we find the item “Login” and log in.
  • After a successful login, proceed to connecting the printer to your account. Scrolling through the parameters window to the very bottom and go to additional settings.
  • Under the heading “Google Cloud Print” click on the “Configure” button.
  • Next, we’ll go to the device page. To add a new printing device, click on the corresponding button.
  • On the next page, you can add the connected printing device. If at the moment several such devices are connected to the laptop, you can tick all the options (or just the one you want).
  • That’s it, the printer has been successfully added and linked to the account. To find out the status or change the parameters of the device, click on the “Add printer”.
  • This is where you can change the device name, remove it from the list, add a new one, and SHARE.
READ  How To Connect A Printer To A Windows 10 Computer

For direct printing, follow this link from any convenient device.

Load the driver for the virtual printer.

The downloaded file must be run, the installation will take place in automatic mode. After installing the driver, when printing any document, the system will give you a choice of a virtual printer.

It is enough to specify the required parameters and click on the corresponding button.

Features:

Of course, all of the printer manufacturer Pantum’s operating facilities are located in China. Your own brand is a very good sign; this means that the firm is going to improve its reputation and not hide behind other brands. The quality of Pantum products is on average Not worse than that of the world’s leading companies. The brand is owned by Zhuhai Seine Technology, which has been producing printers for about 10 years.

She has already been included in industry ratings several times. The Pantum brand has existed since 2011, and has been operating in our country since 2012. The company’s assortment includes GDI models, or so-called Windows printers.

The firm officially announces that it plans to become a global market leader in 2021. The brand has concentrated the full cycle of development, direct production and wholesale of equipment. You can meet Pantum products in 40 different countries.

P2500

This series of printers is characterized by high technical characteristics. Users will definitely appreciate the presence of a wireless interface and compactness of the case. You can print up to 22 pages per minute. Duplex printing is only possible in manual mode. Monthly peak load can reach 15 thousand pages.

Starter refillable cartridges are rated for 700 pages. The device is made with a laconic design. Color mode is not available. Feeder capacity can be up to 150 sheets.

P3010

This model is positioned as an excellent assistant for people who need to print a lot. Implemented connection via Wi-Fi technology and the use of Ethernet networks. At the same time, the rather sparing price pleases.

Other characteristics of the subspecies Pantum P3010D:

  • Laser black and white printing;
  • A4 format;
  • Resolution up to 1200×600 dots per inch;
  • Possibility of automatic printing on two sides;
  • Monthly peak production. 25,000 pages;
  • Cartridge resource. 3000 pages;
  • Printing on paper with a density of 0.06 to 0.2 kg per 1 sq. M;
  • Feeding up to 250 sheets;
  • Output tray with a capacity of 120 sheets;
  • Printing on thick paper, labels, mailing envelopes, cardboard and transparencies;
  • USB 2.0 interface;
  • Mobile printing modes are NOT supported.

The lineup

P5000

This is the flagship line of printers from Pantum. The manufacturer promises to print up to 42 pages per minute, and up to 120 thousand per month. The limiting resolution is 1200×1200 dpi. The first page is displayed in 6.5 seconds. Implemented duplex printing, Ethernet 10/100/1000 Base TX.

Other characteristics of the P5000DN version:

  • Work with separate drum and toner cartridges;
  • Drum cartridge resource. 60 thousand prints;
  • 250 sheets in the output and 100 in the multipurpose tray;
  • Optional storage expansion. up to 2000 sheets.

Pantum Printer Review

The printing equipment HP, Canon, Brother is widely known. But still, there are other brands that definitely deserve attention. After, before buying, it is worth Reading the review of Pantum printers.

P3300

This is an advanced line of Pantum printers. The manufacturer claims that they are productive, economical and functional at the same time. You will NOT have to make any compromises. Duplex printing and excellent network interface are provided. Cost of ownership is kept to a minimum.

The P3300DN model prints up to 33 pages per minute. The monthly limit is 25,000 pages. The device does NOT weigh more than 6.8 kg. It will take about 8 seconds to wait for the first page to come out. Starter rechargeable cartridge rated for 6,000 pages.

P2200

Printers in this series belong to the entry category. They are marketed as an excellent choice for households and small businesses. The device Takes up relatively little space. Perfect for printing letters, personal documents and claims, abstracts.

Main technical characteristics:

  • Laser printing element;
  • Print speed. up to 20 pages per minute;
  • Maximum monthly resource. up to 15,000 pages;
  • USB 2.0 high speed interface;
  • Working resolution. up to 1200 dpi;
  • Manual duplex printing;
  • Start page out in less than 7.8 seconds;
  • Resource of the black cartridge. up to 1600 pages;
  • Output tray up to 100 sheets.

How to use?

As usual, it is best to download the drivers for Pantum printers from the official site. If installed from third party sources, the warranty will automatically be void.

It is also desirable to fill the cartridge with original toners or ink. It should be borne in mind that you will have to reset the cartridge. Otherwise, the system will give an error, and you will not be able to print at least something.

Most often, a Wi-Fi connection is practiced with a laptop. Although no one bothers to connect Pantum printers to the computer in the same way.

As a rule, two options are used. connection in infrastructure mode (via a router) and direct connection.

It is advisable to use WPS mode whenever possible. Before that, you must disconnect the network cable from the router. The connection will be established automatically, even if the main traffic is encrypted.

Configuration in Windows is usually done through the standard “Start” menu, or rather through the printers section in the control panel. If the list of wireless models is empty, you will have to manually specify the IP and port for connection. In the “Special” section, set the required parameters.

If the computer does not see the connected printer, you need to check all the settings and make sure that the device is turned on. If this is not the case and it is not in the interference with the radio signal, not in Remove the cable, it remains to assume serious problems. Eliminate them should be real specialists.

Sometimes another problem arises. the Pantum device does NOT print. In this case, first of all, you should check whether the cartridges are working and whether they are refilled. Difficulties are also created by the lack of paper, the wrong size or type of media, the presence of foreign objects. It is also worth checking if there is a kink in the cables.

With regard to software failures, the most likely:

  • Disappearance of the driver or conflict with other equipment, programs;
  • Disabled print service;
  • Choosing a different printer by default;
  • Offline printer mode;
  • Banned by security policy;
  • Violation of the operating system;
  • Damage by viruses.

The instructions for Pantum printers are generally clear and predictable. But still it is worth focusing on some nuances. The fuser will heat up to a high temperature during printing. You should not touch them at this moment and for some time after the end of printing.

You should contact technical specialists immediately after:

  • Short circuit;
  • Ingestion of liquids or corrosive substances;
  • Falls;
  • Strong blow;
  • Collisions with another object;
  • Sharp and unexplained performance degradation.

It is recommended that rooms with laser printers be ventilated as often as possible. It is imperative to take care of the grounding of the Pantum equipment. Switching to intermittent printing after prolonged use is normal.

Pantum printers are highly regarded by consumers. The devices themselves are quite cheap and look attractive. However, sometimes there are complaints about the high cost of operation. This is largely offset by ease of use and legibility of prints. Apart from the high cost of toners and paints, there should be no special problems.

The following is an overview of the Pantum P2500W printer.

Pantum M6500W Wi-Fi connection: SIMple instructions

Many modern printers and multifunctional devices (MFPs) are connected to computers and laptops not from classic USB, but through wireless technologies. Wi-Fi is commonly used as such an interface, especially in offices and small businesses, where it is necessary to SHARE a general access to a printing device. Let’s consider how to connect a Pantum M6500W printer via Wi-Fi and configure it for optimal performance.

Pantum connects to the network in two ways:

  • In infrastructure mode, switching is performed via a wireless router;
  • In direct mode. the printer connects directly to the laptop via Wi-Fi.

Review and setting up printing on the Pantum MFP here:

Infrastructure mode

For cases where the router is compatible with WPS, the device is connected and configured by pressing a single key on the case without a computer:

  • To do this, press and hold the button for Wi-Fi connection on the MFP control panel.
  • Clamp WPS on the wireless router (be sure to disconnect the network cable from the router before doing this).
  • For Wi-Fi settings of Pantum M6500W, open the Start item or Control Panel “Devices and Printers”.
  • Under the address bar, click “Add Printer” (in Windows 7. “Install.”).
  • In the window that opens, select “Add network, Bluetooth or wireless.”. If the list is empty, click on the inscription below, specify the type “TPC / IP device” and enter its IP address and port number to which it is connected.
  • Select “Special” and go to the section for changing parameters.
  • Enter your details and specify the “LPR” protocol.
  • Install the drivers or wait for Windows to do it automatically.
  • Be sure to update the driver.
  • Name the MFP and share it if necessary.
  • If at the 5th step the required device is in the list, select it.
  • After installing the drivers, the printer can be selected as Default.

Direct connection

How to connect any printer to a laptop, see here:

When connecting the printer to a computer via a USB cable, connect them and launch the tool for setting up Pantum M6500W connection via Wi-Fi:

  • Select the required network if several appear in the list.
  • Perform authorization. enter the password and select the type of network encryption.
  • If successful, a window will appear with connection information.
  • If an error occurs, you will see a SIMilar message.
  • Check your wireless login information and try again.

When the Pantum M6500W printer is directly connected to a laptop via Wi-Fi, users can connect to the printing device without entering a password by finding it on the network. The network name will be indicated as “Pantum-AP-XXXXXX”, where instead of XXXXXX the digits will be indicated by the MAC address.

I think our readers will NOT have any difficulties. But in any case, you can always write in the comments and ask any question!