How to connect pantum printer to laptop

Direct connection

How to connect any printer to a laptop, see here:

When ”connecting the printer to the PC via a USB cable, connect them and run the tool for setting up the Pantum M6500W connection via Wi-Fi:

  • Select the required network if several appear in the list.

In the case when the access point name is not broadcast, you can enter it manually!

  • Authenticate. enter the password and select the type of network encryption.
  • If successful, a window with connection information will appear.
  • If an error occurs, you will see a similar message.
  • Check your wireless login information and try again.

When the Pantum M6500W printer is directly connected to a laptop via Wi-Fi, users can connect to the printing device without entering a password by finding it on the network. The network name will be indicated as “Pantum-AP-XXXXXX”, where instead of XXXXXX the digits of the MAC address will be indicated.

I think our readers will not have any difficulties. But in any case, you can always write in the comments and ask any question.!

Many modern printers and multifunctional devices (MFPs) are connected to computers and laptops not via classic USB, but via wireless technologies. Wi-Fi is commonly used as such an interface, especially in offices and small businesses where it is necessary to provide general access to the printing device. Let’s consider how to connect a Pantum M6500W printer via Wi-Fi and configure it for optimal performance.

Pantum connects to the network in two ways:

  • in infrastructure mode. switching is performed through a wireless router;
  • in direct connection mode. the printer connects to the laptop directly via Wi-Fi.

With any connection, the device will work with only one computer at a time!

Review and setting up printing on the Pantum MFP here:

connect, pantum, printer, laptop

Infrastructure mode

For cases where the router is compatible with WPS, the device is connected and configured by pressing a single key on the case without the participation of a computer:

  • To do this, press and hold the button for Wi-Fi connection on the MFP control panel.
  • Hold WPS on the wireless router (be sure to disconnect the network cable from the router before doing this).
READ  How to reinstall Windows on a Lenovo laptop

Devices will automatically establish a connection even if the access point is broadcasting encrypted traffic and does not broadcast the SSID to the network.

  • Under the address bar, click “Add Printer” (in Windows 7. “Install”).
  • In the window that opens, select “Add network, Bluetooth or wireless”. If the list is empty, click on the inscription below, specify the type “TPC / IP device” and enter its IP address and port number to which it is connected.
  • Select “Special” and go to the section to change the parameters.
  • Enter your details and specify the “LPR” protocol.
  • Install drivers or wait for Windows to do it automatically.
  • Name the MFP and share it if necessary.
  • If at the 5th step there is a desired device in the list, select it.
  • After installing the drivers, the printer can be selected as the default.

Infrastructure mode

For cases where the router is compatible with WPS, the device is connected and configured by pressing a single key on the case without the participation of a computer:

  • To do this, press and hold the button for Wi-Fi connection on the MFP control panel.

Pantum Printer Installation Video_P2500W

  • Hold WPS on the wireless router (be sure to disconnect the network cable from the router before doing this).

Devices will automatically establish a connection even if the access point is broadcasting encrypted traffic and does not broadcast the SSID to the network.

  • Under the address bar, click “Add Printer” (in Windows 7. “Install”).
  • In the window that opens, select “Add network, Bluetooth or wireless”. If the list is empty, click on the inscription below, specify the type “TPC / IP device” and enter its IP address and port number to which it is connected.
  • Select “Special” and go to the section to change the parameters.
  • Enter your details and specify the “LPR” protocol.
  • Install drivers or wait for Windows to do it automatically.
  • Name the MFP and share it if necessary.
  • If at the 5th step there is a desired device in the list, select it.
  • After installing the drivers, the printer can be selected as the default.
READ  How to print small size on a printer

How to connect pantum m6550nw printer to WI-FI

Many modern printers and multifunctional devices (MFPs) are connected to computers and laptops not via classic USB, but via wireless technologies. Wi-Fi is commonly used as such an interface, especially in offices and small businesses where it is necessary to provide general access to the printing device. Let’s consider how to connect a Pantum M6500W printer via Wi-Fi and configure it for optimal performance.

Pantum connects to the network in two ways:

  • in infrastructure mode. switching is performed through a wireless router;
  • in direct connection mode. the printer connects to the laptop directly via Wi-Fi.

With any connection, the device will work with only one computer at a time!

Review and setting up printing on the Pantum MFP here:

Direct connection

How to connect any printer to a laptop, see here:

When connecting the printer to a PC via a USB cable, connect them and run the tool for configuring Pantum M6500W connection via Wi-Fi:

  • Select the required network if several appear in the list.
  • Authenticate. enter the password and select the type of network encryption.
  • If successful, a window with connection information will appear.
  • If an error occurs, you will see a similar message.
  • Check your wireless login information and try again.
READ  How to connect Apple Watch 5 to iPhone

When the Pantum M6500W printer is directly connected to a laptop via Wi-Fi, users can connect to the printing device without entering a password by finding it on the network. The network name will be indicated as “Pantum-AP-XXXXXX”, where instead of XXXXXX the digits of the MAC address will be indicated.

I think our readers will not have any difficulties. But in any case, you can always write in the comments and ask any question.!

and more models of printing devices use not only a standard wired method as a connection, but also a wireless version of integration into work. After all, the installation of Wi-Fi on the MFP allows you to more effectively use its capabilities by all employees of your office. In order to solve the question of how to connect the MFP to Wi-Fi, you need to do the following steps.

Connect the device to your wireless network:

  • tap on the menu screen “Wi-Fi Settings”;
  • further “Wi-Fi network status”.

Next, go to your computer to further configure the printer:

  • go through “Start” in the “Devices and Printers” menu;
  • then click at the top in the “Add Printer” panel;
  • in the window that appears, select “Add a network, wireless or Bluetooth printer”;
  • After that, the computer will make a list of available devices, in which you will select the option you need. Press “Next”;
  • the installation of the necessary drivers will occur after that;
  • then a message will appear about the successful installation of the printing device;
  • here you can set your default printer and print a test page.

It doesn’t take long to set up your printer and you can start enjoying all the benefits of a Wi-Fi connection very quickly.