Step 1. connect Android phone via USB to laptop or computer
Connect your smartphone to your computer using the cable described above. Windows should automatically detect new hardware and install the most needed drivers.
Problems can appear, for example, with Windows XP. Then it’s best to upgrade to Windows 7 or Windows 10.
If your desires or opportunities are updated, then you need to download the Media Transfer Protocol on the Microsoft website on the Microsoft website.
However, it is even easier and faster than updating the system, which today will NOT be free (if you do not know how to activate).
Connecting phone to computer via usb step by step
Every phone like Samsung, Fly, Sony or any Chinese phone can be connected to the computer.
Most of the phones currently produced have been equipped with a USB type Micro-B or USB-C connector.
The main reason is the international standards that forced manufacturers to standardize the charging socket, which also acts as a communication port.
To connect the connection to a laptop or computer, we need a signal cable with a USB type A connector, which goes through the previously mentioned Micro-B type.
Step 2. connect Android phone via USB to laptop or computer
You should see a prompt in the status bar of your smartphone (at the very top) and see a request for trust.
This presence means the successful completion of the process of synchronizing the phone with a laptop or computer.
After clicking on it, we proceed to setting up the connection. To do this, you need to pull the panel from top to bottom.
Choosing the right communication protocol is critical when accessing specific file types and supported software.
- MTP. gives access to multimedia files
- PTP. sees the smartphone as a camera.
Note. DO NOT delete important Android system files located in directories with the word “Android”. All of our data can be found in several folders listed below:
- Music. music folder.
- Download. files downloaded to the smartphone from the Internet
- DCIM or Pictures. photos and. Filmed by the built-in camera
3 steps to properly connect Android phone via USB to laptop or computer
Taking photos, installing applications, downloading music, recording movies. these actions effectively use the memory of Android phones.
To increase the capabilities of your smartphone, it’s a good idea to transfer personal data to your computer or laptop. the easiest and fastest way to connect your Android phone to your laptop via usb.
Such archiving, of course, will contribute to the safety of your files (as a backup) and will allow you to use your phone‘s memory almost unlimited.
I have prepared a three-step guide on how to connect your phone to your laptop or computer. Where to begin?
Step 3. connect Android phone via USB to laptop or computer
To display your phone, launch My Computer. Among the disks you must see him.
By clicking on the icon with the name of the smartphone, all types of memory that have been installed will be displayed: phone memory and memory card.
Moving files is very SIMple. they are supported in the same form as any other operations on a computer / laptop. we enter the Kazakhstan we are interested in making changes.
Should you look for proprietary software designed to control your smartphone, like Samsung’s Kies? Yes and no.
On the one hand, the whole procedure becomes even easier. Connect your phone and select the appropriate option in the program.
However, this type of software unnecessarily loads the resources of the computer system, constantly running in the background.
In my opinion, the three points above are the most effective form of working with files on your device.
Computer or laptop won’t connect to phone. no problem
If your computer has a problem with correctly detecting your phone, several factors can be the culprit.
First, we check if the cable to which we connected the device is damaged. It often happens that a conductor may look functional from the outside, but does not retain its properties due to interruption of the internal transmission conductors.
After connecting to a laptop / computer, the phone sometimes automatically sets the “charging” mode.
Let’s check this by pulling the top bar. Using “Will Charge This Phone” toggling to “Upload Files”.
It may happen that after connecting the cable in the top panel, it will be impossible to switch from charging to file transfer.
Access to the above parameters is also possible via the service code: #. On a smartphone connected to your laptop or computer, select the “MTP ADB” option.
This means that we have configured the phone in conjunction with the “Media Transfer Protocol” driver and “Android Debug Bridge” (the interface used to communicate and control the Android device).
In order for the smartphone to be connected, you need the Corresponding Drivers. In most cases, Windows itself detects the phone and installs the required package.
If this is not the case, then I recommend downloading software that allows you to back up your data and at the same time install the Corresponding drivers (which depends on the phone model).
If the computer still does not see the phone, you may need to enable USB debugging.
This is a programmer mode that allows you to control the device from the console. Very often Windows recognizes a phone connected in this mode.
Then we restart the PC and smartphone. At the end it is worth checking if your smartphone is updated to the latest (available for this model) version.
I know from experience that 80% of cases are due to a damaged USB cable. There are 4 wires in a braid: two of them are responsible for data transmission, one charge and the last GND (ground).
Although the phone is properly charged, the data transfer function may be damaged.
At this point I would like to mention that it is worth checking the other USB port as well, and I recommend connecting your phone to the back of your computer case. The way to enable debug mode is as follows.
Click on “Version number” in the “About phone” section. “Software Information”, Until the message “You have become a programmer (or developer)” appears.
On the main tab “Settings”, the “Programmer (or developer) options” tab appears at the bottom, and on the tab select “USB debugging”.
After the procedure, I recommend disabling the debug mode and developer options by clicking on shift tabs at the top of the menu.
In a situation where, despite using the above instructions, the phone still does NOT connect to the computer, this means
- USB port hardware error. The socket on the device may be dirty.
- Errors in Android software. I recommend that you back up and restore to factory settings.
- Incorrect Windows operation. It is worth checking the connection with another computer / laptop.
I recommend that you discuss the problem. Maybe you have other ideas on how to reconnect your phone to your laptop or computer. Success.
When may you need to use the Internet from a computer on a phone
From time to time there is a need to install new applications, games, documents, additional cache, use the device as a multimedia device to watch. Films, snapshots, finds the necessary information, and also updates the operating system.
You can use a USB cable to solve this problem. To connect the Internet on a smartphone or tablet via a computer via a USB cable, you will have to Get root rights.
Important! This software is also required when moving an application from internal memory to an SD memory card or to increase the speed of the Internet.
How to connect the Internet to the phone via a computer via USB
In this situation, the development of My Public Wi-Fi is considered. To find out how to get the Internet from a PC to a mobile smartphone, you need to download the corresponding application. The program is installed within 2 or 3 minutes, depending on the speed of the Internet. After completing this process, a graph with three main tabs will open on the screen: Setting, Clients, Management.
Note! Wi-Fi network search is carried out automatically.
Android Debug Bridge
Thanks to the powerful Android Debug Bridge utility, you can exchange data with a running Android emulator. This universal tool operates on the basis of client-server technology. The ADB command makes it easy to install or debug an application. The client can access the Unix shell. The server program consists of three components:
- The client sends a command, which is running on the developer’s machine. The user has the ability to invoke the adb command from the command line terminal.
- The daemon (adbd) is used to run a command on a mobile device. The daemon runs as a background process on an Android phone or iPhone.
- Server provides manageability of communication between client and daemon.
How to use the Internet from a computer to a phone via USB
Modern smartphones play an important role in the life of almost everyone. Some features of mobile devices can be unlocked if there is a fast internet connection. Unfortunately, the lack of stability and quality of coverage of the global web adversely affects the performance of the Internet. Due to the high cost of tariffs, subscribers prefer to use the Internet via USB.
Setting up a connection on a smartphone
Before accessing the Internet, you need to turn on the access point. This action can be performed through the function of the OS “Android”.
Note! Modern mobile devices create a wireless access point by standard means. This function was released in the version “Android 2.3”.
- To distribute internet, users should open the settings, select the category “Wireless network”, then go to the tab “” or “Advanced”.
- A menu will open on the screen with a choice of the category “Access point” or “Modem mode”. The user must select the “Wi-Fi Access Point” tab.
- In the appropriate field, you must specify a name (optional item), enter a password and then go through activation. Upon completion of the action, users will be able to connect a mobile phone based on “Android”.
Androidtool.Exe is a type of EXE file associated with Android Reverse Tethering.
Note! This tool was developed by Windows Software Developer for Windows OS. The latest version includes Androidtool.Exe: 126.96.36.199, which was released specifically for Windows 7.
Because of its usefulness, any EXE file is used as a method of virus infection. Sometimes malware disguises itself as a harmless EXE file. It is spread in the form of spam through a mailbox or a malicious website. This file can harm your computer.
Setting up a connection on a computer
Another option is being considered, when the Internet should be connected via a smartphone based on Android to a stationary PC. Access to the network is carried out using a USB cable. To carry out actions:
- The device must be connected to the computer using a cable;
- You need to get access to the settings;
- An access point should be selected;
- It is necessary to activate the item “USB-modem”.
Windows 7-based computers will be able to detect the device in a matter of seconds. Accordingly, the connection to the network occurs instantly.
Note! Windows XP owners can install a driver to correctly identify the mobile device.
It is a program that is installed on Android. The application will allow you to transfer the internet from your phone to your computer using a USB cable. This program can be used when accessing 2G, 3G. In addition, you can connect Wi-Fi.
Note! Tested by Linux and Microsoft Windows clients. User must support RNDIS.
How to connect an Android smartphone to the Internet
Many city dwellers use a wired cable to get access to the Internet. The connection to the global network occurs through a router. But in this case, a method of accessing the internet via Android Xiaomi is considered. Basically, this option is of interest to residents of small regions where 3G is supported. In addition, using an Android smartphone is very convenient when traveling.
How to Connect Samsung Phone to Computer via USB?
Quite often, it becomes necessary to connect your smartphone to a computer. For what? At least in order to transfer images from a smartphone to computer memory. Well, someone charges sensor devices in this way. conveniently, you know. In short, the need exists. Another question is how to connect a smartphone to a computer. In this article, we will show an example based on a Samsung device.
We need a cable (MicroUSB or USB Type-C. no role to play), the smartphone itself and a computer or laptop.
Connect one side to your smartphone.
The other side is to the USB port.
Actually, the connection can be called successful. The smartphone started charging, which means everything is in order (in some cases, the gadget may NOT charge, but this does not lead to panic).
If you’re only using the USB cable and computer to charge your touch device, you can stop there. But if you need to transfer some data from a computer to a smartphone or vice versa, you need to do a few more steps.
When you connect Samsung to computer, the following message appears on the smartphone screen (after unlocking the screen):
The system asks you whether to allow access to data on the phone. You can click “Deny” to charge, but you must click “Allow” to transfer data. What happens if this is not done? We open “My Computer” and see our smartphone. Click on it twice with the left mouse button.
And nothing is visible, because we have denied access to the file system of the smartphone. If you GRANT permission, the file system will be available for viewing and working with it. feel the difference.
Please note that the example above reflects both the internal memory of the smartphone and the external memory card.
Now you can work with files and, for example, transfers them.
If the sign with the choice of connection does NOT appear, the computer does not see the file system of your smartphone, it is likely that the default USB configuration uses only device charging. This option is relevant if the developer mode is enabled and someone has managed to “dig” in it. The solution is this. Go to developer mode (what is it. in this article), then find the item “Default USB configuration”.
Specify “File Transfer”.
Now, when connecting a smartphone to a PC or laptop, the choice of access to data on the smartphone should appear.
Sometimes when you connect or try, the computer starts installing devices and drivers. All the user has to do is wait until the process is complete.
If the automatic installation of the control program failed, it is done manually.
Usually the driver is located on the website of the smartphone manufacturer.
Sometimes there are situations when you have to enable debugging on your phone to sync properly. The developer menu is usually used for this.
After debugging, problems with connecting to the computer disappear.
Enabling smartphone debugging when connected via USB
Some models of mobile devices with less common operating systems (for example, old versions of Windows Mobile or BlackBerry OS) may NOT immediately connect to the PC.
To fix the problem, an option can help, in which the switched off phone is connected first, and only then it is turned on, which first causes the smartphone to be detected by the computer, and then the automatic or manual installation of drivers.
How to connect your phone to your computer. It couldn’t be easier
Knowing how to connect a phone to a computer, you can use this opportunity to transfer data directly from one device to another.
And without the help of the Internet, and at a fairly high speed.
- Existing connection options
- Using Wi-Fi
- USB connection
- Bluetooth connection
- Possible problems
- What to do if the connection failed?
This is sometimes necessary, for example, to transfer photos from a smartphone camera or multimedia files from a computer to a mobile device to a PC.
For most modern phones, there are several ways to connect.
What to do if the connection failed?
There is another option for data transfer, which can be used as a last resort. for example, when there are no Special Applications, there is also a cord, and there is no access to the Internet both from a PC and from a phone.
However, this option will require the presence of:
- Removable flash cards (usually microSD) on a smartphone;
- A card reader on a computer or laptop (in the latter case, this is more likely, because most even budget models have a reader for drives of different formats).
External slot for microSD card on a smartphone
All you need is to transfer data from the phone memory to a flash card, remove it from the device and insert it into a computer card reader.
Or do the opposite if information is transferred from PC to smartphone.
In some smartphones, you will have to take out the battery to perform the operation. but there are models with external access to the flash card.
When connected via USB, users get the maximum opportunities:
- Transfer data at high speed;
- Use a mobile phone to access the Internet using a GPRS connection or 4G network;
- Turn on your smartphone as a webcam and communicate with it, for example, in Skype. This will be the best option for users who have cameras on their PC. This is especially convenient, given that modern phones have image resolution at the level of the most expensive recording devices.
The disadvantage of this method is linking a mobile device to a computer.
At the same time, it will not be possible to call from it or go to another room while the data is being transferred.
All that is required for connection is a cable (usually microUSB / USB) and a free port on the computer.
In most cases, you do not even need to install any drivers. you just need to select the storage mode, modem or webcam mode on your phone.
In this case, it is even possible to use a computer as a charger.
Options for connecting an Android phone to a PC via USB
Connect your phone via USB using a cable, you can see the notification below about connecting a new device.
After installing the appropriate drivers (usually requires a PC to be connected to the Internet), synchronization ends automatically.
If you have Bluetooth on a laptop or, which is much less common now, on a PC, you can synchronize two devices using such a wireless connection.
To do this, both modules are activated and a search for compatible devices is carried out on the computer.
When the smartphone is found, it is paired via Bluetooth, choosing the option without using a passkey.
To work with many Bluetooth-enabled devices, we recommend using the BlueSoleil program. This is a professional tool for pairing a computer or laptop with mobile and peripheral devices via Bluetooth. Supports all Windows versions, most smartphones, microphones, printers, TVs.
Connection via “Wi-Fi” can be called the most convenient and fastest in terms of connection time.
At the same time, data transfer is slower, and for its implementation you will need either a Wi-Fi router or an appropriate adapter.
There are several known ways to connect a mobile phone to a PC, but the fastest and easiest of them is to install a special application.
There are variants of such programs for all operating systems, including iOS, and their principle of operation is almost the same.
One of them is a free FTP server application, freely available on PlayMarket.
After installation on a smartphone, the program requires launch, after which it shows addresses, which you need to write in the address bar of “Explorer” on the computer.
This provides the ability to access the data of the mobile device as a regular folder.
over, the user can change, delete and add new files both on a removable disk and in internal and external memory.
Connecting your phone to a PC via Wi-Fi
Existing connection options
If you need to connect your phone to a computer, several solutions are possible.
The main options are:
- Connection via USB port of a computer using a cable;
- Wireless communication via Wi-Fi;
- Bluetooth embedded connection.
The choice of a particular option depends on the reason why all this is being done.
If, for example, you need to transfer a large amount of data (a movie, a recording, or even a game application), the easiest way is to use a cable and a USB connection.
The same method is best for using a smartphone as a webcam or modem.
Cord for connecting a smartphone to a PC via USB
Wireless connections will allow you to connect faster, although they provide a lower transfer speed.
They are also used if the PC or laptop has a Wi-Fi or “Bluetooth” module, and the cord is not available at the moment.
The EASIEST way to connect to your phone from your computer. No USB over Wi-Fi
If you need to quickly connect from a computer to a phone or tablet to upload pictures, music or. But there is a USB cable at hand, then in this I will show you how you can connect from a computer to a phone via Wi-Fi
Computer does not see Android via USB
Someone might argue that you can flash the phone without connecting via USB, and for transferring files there is Wi-Fi, instant messengers, Cloud storage, e-mail, finally. But I just can’t refuse the USB connection, I constantly carry a cable with me and I think this is one of the most convenient ways to transfer data.
So, if you connected a smartphone, but nothing came of it:
- Open Android Settings.
- Go to the section “About phone” (may be called “About the device”).
- Find the build number (model) and click on this item, until a notification appears that you will soon become a developer. Usually you need to press 7-10 times.
After you become a developer, a new section will appear in the android settings. “Developer options”. Inside it you will find the “USB Debugging” switch, which must be set to “On”.
Now try connecting your phone to your computer again. When connected, a mode selection window should appear on the smartphone screen. The default on older versions of Android is Charge Only. If the window does NOT appear, slide it out of the notification shade.
To transfer files, you need to select Media Device (MTP) or Mass Storage mode. There will also be a PTP mode among the options, but it is only suitable for photographs, which can just as well be moved to MTP.
After choosing the appropriate mode in “Computer” on Windows, a media device will appear, with the contents of which you can work. Internal memory and SD card may be shown together or as separate drives, depending on the features of phone models and Android versions. But it doesn’t matter, the main thing is that the.
In the Android settings, there are second parameters responsible for connecting via USB, except for debugging. However, there are some peculiarities. For example, on Nexus smartphones, you need to unlock a screen protected by a password or pattern in order for the computer to access the contents of the memory.
Also, a USB connection cannot be established if tethering is enabled on Android. To check its status and disable if necessary:
- Open Settings.
- In the “Network and Connections” section, click “Advanced Settings” or “”.
- Go into tethering mode and Disable the WLAN hotspot. If it is disabled, nothing else needs to be done.
Some manufacturers offer users special programs for controlling smartphones on a computer, but you can establish a SIMple connection via USB without this software. Utilities from manufacturers are needed not for trivial transfer of photos, but for performing more complex tasks: updating the phone software via a computer, firmware of the device, resetting settings.
The reason that the computer does not see Android via USB may be incorrectly installed or just a crooked custom firmware. Also, a factory reset sometimes helps, but be sure to back up your data before doing it, as it will be deleted. The malfunction may disappear even after a normal restart of the smartphone. keep this in mind.
- Connect your phone to your computer.
- Open Device Manager. On Windows 10 The corresponding item is in the context menu invoked by right-clicking on “Start”. In earlier versions of Windows, the Manager can be found in the Control Panel in the Icons view.
- Check all USB controllers. If there is an exclamation mark next to one of them, then this indicates a problem with the software.
To make sure that the phone is marked in the manager, Disconnect the USB cable. If the problem controller disappears, then you have found the source of the problem. A smartphone without drivers can also be displayed in other sections: for example, among second or portable devices.
So, you have found that something strange is happening with the phone drivers. What to do next?
- Connect the phone so that it appears in the device manager.
- Select it and delete.
- Update the hardware configuration so that the computer re-detects the phone and starts installing drivers.
You can not remove the device, but only update the driver. Right click on the phone, select the “Driver” tab and click “Update”. Another option is to first uninstall the driver and then reinstall it, rather than touching the device.
In the search box, select automatic detection. If you downloaded the phone driver from the official site, you can click “Search this computer” and specify the path to the downloaded file with the software.
If you have a Chinese smartphone, then there may be another problem with it. the inability to find a suitable driver on the Internet. They are often posted on forums like w3bsit3-dns.com, but if there is nothing, try installing a universal driver. It is called Universal Adb Driver and is designed to ensure the Android Debug Bridge and PC sync utilities work properly with Android devices. Versatility is not always good, but there is a high probability that in the case of a Chinese phone, you can SIMply get access to the contents of the memory.
Checking the cable and port
If there are no kinks, bites, breaks or other mechanical damage on the wire, check the USB port. Try to connect to the second connector or insert another device into the same port. for example, a mouse.
If Windows XP is installed on your computer, then urgently look for an opportunity to go at least to the “seven”. But for starters, you can SIMply install the MTP protocol so that XP can learn to work with Android. The trick is that when the first version of Android appeared, Microsoft released Windows 7. Therefore, there is an MTP protocol in XP, and you have to install it separately. You can download MTP on the Microsoft website.
If the computer detects any other device, and the phone categorically DOES NOT want to see, then it’s time to move the focus to Android settings and connection features. Yes, there is a possibility of mechanical damage to the microUSB connector on the phone, but I haven’t come across this yet. If you have something broken, you will most likely notice it.
Most often, the inability to establish a connection between the computer and the phone is associated with software errors. If none of the methods listed below helps to solve the problem, Contact the service center. it seems that the smartphone really needs to be repaired.
Resolving error code 19
- Click on the WinR keyboard.
- Run “regedit”.
- Expand the branch HKEY_LOCAL_MACHINE / SYSTEM / CurrentControlSet / Control / Class /.
- Find the UpperFilters parameter, highlight and remove.
After removing the option, restart your computer and try to connect your phone again.
Checking energy saving settings
- Open Control Panel.
- Turn on the display mode “Large icons”.
- Go to the section “Power supply”.
- Find the scheme you are using and go to setting it up.
- Select change advanced options.
- Expand the USB parameters and set the items “Here are batteries” and “From the network” to “Forbidden”.
- Click “OK” to save the configuration.
I did not measure how much the prohibition on automatic port disconnection affects the battery life, but there is a noticeable difference in the comments. But problems with connecting external devices like Android phones are eliminated.
Alternative ways to transfer files
- Synchronizing data via Google Drive. Android requires a Google account to function properly, so you definitely have access to cloud storage. You can transfer files through other services. DropBox, OneDrive. I am using YANDEX.DISK.
- Transfer files via email, instant messengers or social networks. I often add small files to the “Documents”. and then download them to my computer.
- Install the AirDroid application on your phone and access the memory through the browser on your computer.
You can think of other options for connecting your Android smartphone to your computer. For example, create an FTP server on your phone or set up a remote connection via TeamViewer. So USB is not the only way out. But if the wired connection is not established, you should still look at what the reason is, and, if possible, eliminate it.
Android Safe Mode, Developer Mode motherboard drivers and other nuances
Among other things, if the problem in question occurs, please note the following points:
- Enable developer mode on Android, and then enable USB debugging in developer options and, separately, find the default USB configuration item in developer settings and set the “File transfer” mode. May be helpful here: How to enable USB debugging on Android.
- If you used the USB modem mode on your phone, in the settings (usually in the “Connections” or “Network and Internet” section. “Access point and modem”) Turn off the “USB modem” option.
- If the phone is no longer visible after reinstalling or updating Windows, install the original drivers for the motherboard, chipset from the manufacturer’s website or from the laptop manufacturer’s website if you have a laptop.
- Try restarting your Android phone in Safe Mode. If after that it became visible when connected to a computer, then most likely the reason is in some third-party applications, most often related to protection, control and SIMilar.
- Try using the built-in troubleshooting in Windows: go to Control Panel. Troubleshoot. Hardware and Sound. Device Setup (in recent versions of Windows 10, the item is missing).
- If possible, try connecting your phone to a second computer. If it is also NOT visible there, again, the matter is most likely in the cable or connector. over, the connector on the phone may stop functioning for transferring files SIMply due to the ingress of dirt or water, followed by oxidation of the contacts.
- They can also help (or they can create problems with other USB drives, so take it only if you are ready for this) methods regarding cleaning the drivers from the instructions The computer does not see the USB flash drive.
If none of the options helps to solve the problem, and the computer still does not see your Android smartphone, describe the situation in the comments: what was done, after which the problem appeared, how does your device behave when connected via USB, has the cable been checked with another phone, a Problem device on another computer. I’ll try to help.
Checking the phone (MTP device) operation in device manager
- Open Device Manager on your Windows 10, 8.1, or Windows 7 computer while your phone is connected. To open Device Manager, you can press the WindowsR keys on your keyboard, type devmgmt.Msc, and press Enter. Windows is the OS logo key.
- See if there is a device in the device manager named MTP (MTP Device, MTP devices) or the name of your phone (can be found in the section “Portable devices).
- If there is, double click on it, go to the Driver tab, click Update driver. Search for drivers on this computer. Select from a list of available drivers on your computer and see the list. If it has more than one compatible device, try to select the wrong driver that is currently installed, usually you need to select “USB MTP device”.
- If no new devices appear in the manager when disconnecting and connecting the phone via USB, this is another argument in favor of problems with the cable, connector on the phone or computer.
on this topic, if the device appears in the device manager with an exclamation mark, in a separate instruction Wrong service installation section in this MTP INF file.
What to do if the computer does not see the Android phone connected via USB. instructions. The computer does not see the phone via USB. why and how to fix it
If you are faced with the fact that the phone does not connect via USB, that is, the computer does not see it for file transfer, but only charging takes place, while the connection sound is playing, this manual provides details on how to fix this and enable the ability to View content phone memory when connected via USB cable.
The steps described below are suitable for both latest and previous Android phones in case the smartphone is not visible after connecting via USB on a computer with Windows 10, 8.1, Windows 7 and XP or Mac OS.
- Why the computer does not see the phone via USB, only charging. SIMple reasons
- Additional methods to fix if Android phone is not visible on computer
- Additional Information
Why Android phone is not visible on the computer via USB and only charging takes place. SIMple reasons and solutions
Before proceeding with additional methods for solving the problem when the phone is not visible through the USB connection, I recommend Pay attention to the following SIMple points: very often the cause is one of the following:
- If you took a USB connection cable that’s not an original cheap charging or that comes with another device (for example, for charging wireless headphones or a second device that is NOT intended for receiving and transmitting data), then the reason may be this: not all cables can transmit data, there are corresponding contacts, and outwardly it is not noticeable. The solution is a working cable with GOOD data transfer capability.
- If you are faced with the fact that when you connect a smartphone to a computer, it is not visible, but the phone was recently repaired and something related to the board or connector was repaired, it is highly likely that the repair caused the problem: very often the connectors are soldered so that after that only charging works properly. The solution is just to redo.
- If you have Mac OS, just install Android File Transfer app for data transfer capability, official website: https://www.Android.com/filetransfer/
- If you still have Windows XP, install the MTP (Media Transfer Protocol) driver. https://www.Microsoft.com/en-in/download/details.Aspx?Id=19153
Additionally, considering that connecting even with a working cable via a USB hub (USB port splitter) to a faulty USB connector on a computer or laptop, and sometimes to the front of a PC may cause the problem in question. Try a direct connection to USB, another connector, the back of the PC, if connected to a USB 3.0 connector (usually blue). check if the problem persists when connecting to USB 2.0.
And the last SIMple moment: after connecting the phone to the computer, in order for it to start displaying in the explorer with the ability to view a photo worthy of files, you need:
- Unlock phone when connected if it is locked. Accessing data on locked modern Android phones will not work.
- In the notification area, click on USB connection notification (by default, most phones are connected only for charging). If the notification does NOT appear, or rather it does not say that this is a USB connection, but only text in charging, then from the “point of view” of the phone, the connection does NOT serve for data transfer (wrong cable, damaged cable, connector on the phone or computer). Below are screenshots with the appearance of the notification on pure Android 9 and 8, on Samsung Galaxy and on Android 6-7.
- Select MTP file transfer mode for USB connection. On older versions of Android, there may also be an item for connecting as USB Mass Storage, it will also work, and it may work even better.
If the listed methods did not help, let’s move on to more complex fixes.
How to fix if the computer does not see the phone connected via USB. additional methods
If your phone does not connect via USB to a data-capable computer, but only charges, try the following methods to fix the problem.
If you come to the conclusion that physical problems (socket, something else) are the prerequisite for problems when connecting the phone, or you SIMply do not want to understand the reasons for a long time, then you can transfer files from and to the phone in other ways:
- If you have Windows 10. use the built-in phone app (photo transfer only), if your Samsung phone. Samsung Flow app.
- Synchronization via Cloud storage Google Drive, OneDrive, Dropbox, Yandex Disk.
- Using programs like AirDroid (convenient and easy for novice users).
- Create an FTP server on your phone or connect it as a network drive in Windows.
This concludes, and if you have any questions or additions after reading, I will be glad if you share.