How to connect SIM on iPhone

Table of Contents

IPhone activation process

Before turning on your iPhone, check to see if you have a SIM card of the correct size (micro for older models and nano for newer). Activation will fail without a SIM. You will also need a wireless Internet connection (or cellular connection) or a computer with iTunes (as an option for restoring a backup). And only after you are convinced of all the listed steps, you can safely hold down the Power button (or hold down the lower volume and lock buttons on iPhone 10 and above).

There are no legal methods to activate a device without a SIM card! In versions iOS 7 and higher / lower, such a vulnerability did exist, but since iOS 7.1.2 it has been fixed.

How the two terms “activation” and “Apple’s warranty” are related

Many users, who have picked up an Apple device for the first time, ask themselves the question, what is the meaning of the warranty when starting up for the first time or restarting from scratch? The fact is that the activation process is accompanied by an automatic start of the warranty period from Apple. The warranty period does not start on the day of purchase, but from the moment the Apple ID account was created (or re-authorized).

Important note! The initial text “Hello” (Hello and other greetings in different languages) in no way signals that the device is new. This inscription appears regardless of whether the device is new straight out of the box or used with discarded content.

How to activate iPhone

Having become the happy owner of a gadget from Apple, you will have to understand not only the system, but also understand how to activate it. Launching is required for the device to start working. This process is easier than it sounds, and the setup itself will take a few minutes. The user may be surprised by the number of lines and fields that need to be filled in completely. In the article material, we will tell you what to enter and choose in each of them. Follow the instructions below carefully, and if you do everything right, then there should be no problems. We will analyze all possible ways to activate a new iPhone.

The activation process may vary slightly. it all depends on the specific model of the gadget. But, in general, the procedure is identical for every Apple device, and the instructions below will work for any model. If you are holding an iPhone in your hands for the first time and / or have switched to a device from the Android operating system, then we suggest reading this detailed guide and learn how to activate on a new device.

Activation via iTunes

Another method of activating the “apple” device is to enable it for further work through the iTunes utility. The multifunctional program allows you to organize space, buy and download content, back up or delete data. It can be downloaded for free on the official Apple website. For the following instructions, you can not do without a PC and a USB cable.

  • Connect the USB cable to the computer (for smooth operation it is better to use the original one);
  • The program should start automatically. If it doesn’t, turn it on yourself;
  • Wait a while for the utility to recognize the connected gadget and connect to the company’s servers;
  • On the left side of the screen, find the icon of your device and click on it;
  • The program will ask you to log in to the Apple ID. Register or log in with your username and password. You can skip this step and create an account after complete setup, but, most importantly, do not forget to do it later;
  • The next step is iTunes will offer to restore the backup or start the iPhone as new;
  • Wait a while. The iPhone should restart. After that, setting up the phone is no different from the previous instructions.
    connect, iphone

Data recovery from backup if required

Everything is simple here: when completely deleting data, make a backup copy, and then, when setting up a new gadget, select “Restore from iCloud copy”. Log in with your ID and find the most recent backup in the list. Recovery may take several minutes, and the process cannot be interrupted!

Why activation is needed

As mentioned above, to activate means to make the very first turn on if you just took the device out of the box and removed the protective film. Or just turn it on, if the phone was flashed before or the settings were reset.

Activation is the initial setting of the gadget’s parameters, namely: language, region of residence, selection of a backup copy (if there is one: described below) and calibration of some additional functions and services. If you have already activated the iPhone, then some of the points should be familiar to you, otherwise. read our detailed article to the end.

Activation is also required for the device to identify your cellular operator and register it in the network database. After the owner inserts a SIM card and turns on the device, the iPhone sends information from the SIM, namely, a unique IMSI (International Mobile Subscriber Identifier) ​​code. In a matter of seconds, all data is analyzed, all information is confirmed, and it is also checked whether the subscriber can access the requested network in which he is located.

How to insert a SIM card into an iPhone

The first task that a user faces after purchasing an iPhone is installing a SIM card. If before that you have not used smartphones with a non-collapsible body, then some difficulties may arise with this. In this article, we will talk about how to insert a SIM card into an iPhone 4, 4s, 5, 5c, 5s, SE, 6, 6s or 7. Also in this article you can learn about the supported SIM card sizes and some features of the iPhone 3GS models, iPhone 3G and original iPhone.

How to insert a SIM card in iPhone 3GS and older versions

If you have an iPhone 3GS, iPhone 3G, or an original first generation iPhone, the process for installing a SIM card is exactly the same as described above. The only difference is the location of the SIM card slot.

In the iPhone 3GS, iPhone 3G and the first iPhone, the SIM card slot is inserted from the top of the smartphone, and not from the side, as on more modern models.

How to insert a SIM card in iPhone 4 and newer

Turn off your iPhone before inserting the SIM card. To do this, you need to press the power button and hold it until the screen prompts you to turn off the iPhone. Click “Disable” and

If you have an iPhone 4 or newer version of iPhone (for example, iPhone 4s, 5, 5c, 5s, SE, 6, 6s, or 7), the SIM card slot is on the right side of the device. If you look at the right side of the device, you will immediately notice it. This is a small rectangle with a hole for a paper clip.

In order to insert a SIM card, this slot must first be removed from the iPhone. To do this, you need a regular paper clip or the one that comes with your iPhone. Insert a paper clip into the hole in the slot and press gently. You need to press gently, gradually increasing the effort.

When the pressure is sufficient, you will hear a small click and the SIM card slot will slide out of the iPhone. Now you need to carefully pry the slot with your fingernail and remove it completely.

READ  How to link a card to an iPhone phone

After that, carefully insert the SIM card into the slot and insert it into the iPhone. When installing a SIM card, insert it in such a way that the contacts of the SIM card are facing down, and the cut corner of the SIM card coincides with the cut corner on the slot.

Once the SIM card is in the slot, it can be inserted into the iPhone. In this case, you need to make sure that the holes on the SIM card slot and on the iPhone match.

You also need to insert the SIM card into the iPhone gently with little effort. After the SIM card slot is aligned with the side of the iPhone. SIM card is inserted.

Which SIM card can be inserted into the iPhone

Different iPhone models support different SIM cards. Therefore, before starting to insert something, you need to clarify which SIM card you need. To do this, you can use the table below.

Smartphone model SIM card SIM card dimensions
iPhone 7, iPhone 7 Plus Nano SIM 12.3 mm x 8.8 mm
iPhone 6s, iPhone 6s Plus Nano SIM 12.3 mm x 8.8 mm
iPhone 6, iPhone 6 Plus Nano SIM 12.3 mm x 8.8 mm
iPhone 5 Nano SIM 12.3 mm x 8.8 mm
iPhone 5s Nano SIM 12.3 mm x 8.8 mm
iPhone SE Nano SIM 12.3 mm x 8.8 mm
iPhone 5c Nano SIM 12.3 mm x 8.8 mm
iPhone 4s Micro SIM 15 mm x 12 mm
iPhone 4 Micro SIM 15 mm x 12 mm
iPhone 3GS Standard SIM 25 mm x 15 mm
iPhone 3G Standard SIM 25 mm x 15 mm
Original iPhone Standard SIM 25 mm x 15 mm

If, on the contrary, your SIM card is smaller than the size required for your iPhone model, then you can use a special adapter that will allow you to insert a smaller SIM card into a larger slot. Usually, these adapters come with new SIM cards.

P.S. It is hoped that the iPhone will receive 2 SIM in 2018

In the latest reports, Ming-Chi Kuo emphasizes that in 2018 the iPhone will receive support for two SIMs at once.

Next year, Apple smartphones will be equipped with Intel XMM 7560 and Qualcomm Snapdragon X20 modems, which support 4×4 MIMO technology. It will allow the iPhone to work with two 4G mobile networks at the same time.

Based on this information, an analyst at KGI Securities concludes that there are two SIMs in the iPhone. But you cannot be 100% sure of this.

In addition, the second card in the iPhone can be an eSIM. a universal virtual version of the SIM. This is used in Apple Watch Series 3, but local operators do not work with it.

? Why you might need 2 SIM cards

Here are three scenarios that I use myself:

  • Additional number for work or personal life
  • Second SIM with inexpensive and high-quality internet
  • Local operator card abroad

To do this, I use the second Nokia 230 push-button phone, as well as a mobile Wi-Fi router.

You can also use the second SIM for inexpensive calls abroad, the SIM-pair of the main card for work (a feature for Ukraine), and so on. There are a lot of options.

Nikolay Gritsaenko

PhD in ripped jeans. Writing a doctoral thesis on Mac, never letting go of my iPhone, talking about technology and life.

How to set up a second SIM on iPhone

Due to the fact that only one radio is installed in the iPhone XS, XS Max and XR (only they support eSIM), you will have to give priority to the new number. If desired, it can be designated as primary or secondary.

iPhone, for example, allows you to specify from which number to call specific subscribers from your contact list.

  • To do this, launch the “Contacts” application;
  • Select the desired contact and click “Preferred tariff”;
  • Now set the number that will be used to communicate with this contact;
  • If desired, the SIM card can be selected before making a call, or use the one with which the last call was made.

How to connect eSIM

Connection is carried out by scanning a special QR code on the card, which will be issued by a Tele2 employee. You will need to take it with you and keep it in case you have to replace the device. True, it is not yet clear how to act if the smartphone is out of order and it is not possible to untie the subscriber profile. The press service of Tele2 did not have time to answer the question AppleInsider.ru.

How to set up eSIM from Tele2 on iPhone in Russia

We have already reported that today the Russian operator Tele2 was the first in the country to start issuing virtual SIM cards, also known as eSIMs. Despite a number of features accompanying the connection process, this is a real technology that subscribers of American and European operators have been using for a long time. We figured out how to connect to the eSIM, where you need to go for this and what to do after connecting so that everything works as it should.

As of April 29, it is possible to connect to eSIM only in six Tele2 communication salons, which are located.

Where to connect eSIM in Russia

The media reported information about five connection points, but the operator’s representatives clarified that in fact there are six of them. Here are their addresses:

  • Moscow, st. m. “Pushkinskaya”, st. Tverskaya, 25/9;
  • Moscow, st. Tverskaya, 17;
  • Moscow, st. m. “Chistye Prudy”, st. Myasnitskaya, 30/1 / 2s2;
  • Moscow, 24th km of MKAD, shopping center “Vegas”;
  • Moscow, st. m. “Rumyantsevo”, BC “Comcity”;
  • Moscow, pl. Kievsky railway station, 2, shopping center “Evropeyskiy”.

According to Tele2 representatives, soon the number of offices where you can apply for eSIM will be increased to 88.

Russian legislation equates issuing eSIMs with cloning SIM cards. Therefore, in order not to violate anything, you will first have to issue a physical SIM card, the subscriber profile of which will be recorded on your smartphone. As soon as the profile is recorded on the smartphone, the SIM itself will become invalid. This is a mandatory step, which, unfortunately, cannot be bypassed in any way.

How to set up internet on eSIM

To select the number from which you will access the Internet, you need to clarify their priority.

  • To do this, go to “Settings”. “Cellular” and select “Cellular data”;
  • After that, select the number that you want to use for data transmission over the cellular network.

Subscribe to our channel in Yandex.Zen to read exclusive materials that are not on the site every day.

Longreads for you

Apple, although not a medical company, is trying to combat the spread of COVID-19 in every possible way. First, she made a tracking system for the infected, then she began to produce masks, and then she took up tests.

Scientists at Stanford University taught the Apple Watch to identify functional grades of heart failure using a 6-minute тест walk test. Now doctors will be able to diagnose patients remotely, without forcing them to be physically present at the appointment

iPhone 6 SIM Card Set Up Activation Fast 2020

Apple has finally found a partner to manufacture Apple Car. the company is investing over 3.5 billion in Kia Motors. The deal will be announced in the coming days. Will Kia participate in the development or act only as a manufacturer. we will analyze in this article.

What to do if iPhone won’t connect to PC or laptop via USB?

Sometimes it happens that the iPhone does not sync with the computer. Then you need to try the following steps:

  • Unlock your smartphone and confirm permission to access it.
  • Replace the USB cable, the reason may be a malfunction of its connectors.
  • Restart both devices. both the computer and the smartphone.
  • Disable antivirus on PC.
  • Reset Settings on iPhone.

There is an option that this version of the operating system is not suitable for synchronizing iPhone and PC, or the necessary drivers may be missing, or the version of support for Apple devices is outdated.

How to connect iPhone to MacBook

To connect your iPhone to your MacBook, you also need to install iTunes on your macbook. Here, too, synchronization options are possible via USB cable or Wi-Fi.

If you set up automatic synchronization in iTunes, then all media data from the iPhone will be uploaded to the macbook when it is connected. If you choose to sync the marked songs and videos, then the user will be able to independently select the files to download to the iPhone. Also, as in the option of synchronizing iPhone and Windows, it is possible to create a backup copy of the smartphone and update it.

An additional function of transferring data between iPhone and macbook is the ability to transfer via airdrop. It allows you to transfer images and videos from your smartphone to your macbook by storing the files in the Downloads folder. To do this, you need to select one or more images on your iPhone, click send and select the AirDrop function. At the same time, AirDrop must be visible for all devices on the MacBook.

READ  How to Reset iPhone 7 When Changing Owners

Comparison of methods for connecting iPhone to computer

All types of iPhone to PC connection have their pros and cons. Each user chooses what suits him best.

Comparative characteristics of ways to connect iPhone to PC:

  • Connecting iPhone without using iTunes.

Doesn’t require iTunes to be installed on your computer, but only allows you to copy photos and videos from iPhone to PC. In this case, it is impossible to create a backup copy. Connection is via a USB cable.

  • Connecting iPhone using iTunes software via USB cable.
  • restore from backup;
  • the ability to charge a smartphone;
  • faster data transfer rate than when connected via Wi-Fi;
  • the ability to reset to the original settings.
  • occupies USB ports of a computer, which there may be few on a PC or laptop;
  • short range.
  • Connecting iPhone using iTunes, via Wi-Fi network.
  • large radius of action;
  • no need to use a USB cable, which excludes the possibility of accidentally touching and disconnecting it;
  • does not occupy free USB ports of the PC.
  • discharges the phone;
  • lower data transfer rate than when connected via cable;
  • inability to restore and update the firmware, and restore from a backup.

How to connect iPhone to computer or laptop?

There are several options for connecting an iPhone. But in order to take full advantage of the possibilities of transferring data from a smartphone, creating a backup that will come in handy when replacing, losing or damaging an iPhone, it is best to install the iTunes program on your computer.

If there is no aytyuns on the PC, then the iPhone is recognized as a flash drive or memory card. In this case, only photo and video files can be copied. It is impossible to create a backup copy, add audio files to a smartphone. About possible options and subtleties, how to connect an iPhone to a computer

How to connect iPhone to computer via USB cable

A proprietary USB cable that comes with an iPhone of any model is used both for charging the iPhone and for pairing it with external devices.

To connect your iPhone to your computer, take a USB cable, and connect one end to your smartphone to the Lightning connector, and the other to the USB output on your computer.

If iTunes is not installed on the computer, then the offer to open the device will automatically be displayed, if the device autorun is enabled on the computer.

At the same time, a proposal will appear on the iPhone itself to allow or deny access to the files of the smartphone, but for this it is necessary to unlock the phone, otherwise the notification will not be displayed.

If the iPhone user denies access to files, then the computer will see the connection of the phone, but the folder with the photo will become inaccessible.

If you allow access to the iPhone without iTunes installed, you can only transfer photo and video files from the phone, but you cannot transfer images from the PC itself to the iPhone.

To transfer audio, photo, and video files, you need to install iTunes. It can be found on the Internet and is free to download for Windows.

When installing iTunes, a menu for selecting additional program functions will be displayed, you can select or refuse them. You also need to specify the installation folder.

After selecting all the functions, the installation of iTunes will begin.

Upon completion of the installation of the program, it will open. If not the latest version of iTunes is installed, then it will notify the user about this and offer to download the new version.

After installing the latest version of iTunes, the system will prompt you to restart your PC.

To connect iPhone to iTunes, connect the USB cable to your computer and launch iTunes. Here, too, you must allow access to both iTunes and iPhone.

Then iTunes will open with the iPhone connected, where the smartphone files will be on the left in the menu.

iTunes is a special program developed by Apple that is designed to sync the contents of Apple devices. Therefore, for high-quality operation of the iPhone or ipad, you need to install iTunes on your computer, since there is no other way to upload audio, photo, video files, films to the gadget. It is also worth remembering that iTunes has a set of standard drivers for the correct recognition of the iPhone by the computer.

How to connect iPhone to computer via Wi-Fi

For the convenience of connecting iPhone to a computer, you can use the Wi-Fi function, which is distributed by the router. This feature became available in October 2011. Prior to this, synchronization took place only using a USB cable. An important mandatory point is the connection of both the iPhone and the computer to the same Wi-Fi point. Otherwise, synchronization will not occur.

You can see if there is a connection to the router of interest on your computer through Control Panel → Network and Internet → Network and Sharing Center. An active internet connection will be displayed in the corresponding section.

In order to set up synchronization between iPhone and computer via Wi-Fi, you need to connect from these devices to one Wi-Fi point.

Then connect the iPhone to the computer using a USB cable (it is useful only for the initial setup).

Open iTunes and go to the main overview page by clicking on the button at the top of the page.

Here you will see information about your iPhone, you will be able to create a backup copy to iCloud or to your computer, as well as configure the connection settings.

To work with an iPhone over Wi-Fi, find the Sync with this iPhone over Wi-Fi option and check the box and click Apply.

After setting up the functionality, the iPhone will automatically connect to iTunes and the use of a USB cable is no longer needed, but only in the case of using the same Wi-Fi network. This should also not be forgotten.

What to do if iTunes can’t see iPhone?

First check if the USB cable is working properly. The problem may be in him.

If you are convinced that everything is fine with the cable and iTunes does not see the iPhone, then the problem may be outdated driver updates. Along with the iTunes program, the appropriate drivers are installed on the computer, thanks to which the system recognizes the connected iPhone. Sometimes they may not update and iTunes will stop seeing the iPhone. Therefore, to update the drivers on the computer and eliminate the invisibility of the iPhone, do the following:

  • Connect iPhone to Computer.
  • Go to computer properties by right-clicking on the Computer icon

mouse. Then go to Device Manager.

  • In the window that opens, click on the USB Controllers item. When connected

iPhone to the computer at this point the Apple Mobile Device USB Driver section will be available, right-click on it and select Update drivers.

  • Then click on the item Search for drivers on this computer.
  • To tell the system the location of the driver folder to work in iTunes,

you must follow this path: Local drive C (where the system folders are stored) → Program Files → Common Files → Apple → Mobile Device Support → Drivers → Ok. And click Next. Then the system will update the necessary drivers, and iTunes should work. After the update, it is advisable to restart the PC.

If you find an error, please select a piece of text and press CtrlEnter.

How to connect iPhone to computer via USB?

Apple devices have a closed architecture. many operations require the use of a PC. That is why, when buying an iPhone, the user should be ready to connect this gadget via a USB cable much more often than any of the Androids. The operation of connecting iPhone via USB seems simple, however, there are some nuances that do not allow working with this device as with a standard data carrier.

USB connection: pros and cons

Connecting with a USB cable isn’t the only way to connect iPhone to iTunes and PC in general. iPhone with iOS version older than 5.0 can be connected to the computer via Wi-Fi. However, most owners of Apple technology “the old fashioned way” continue to use cables, and here’s why:

    The cable connection guarantees high speed of data transfer (for USB 3.0. 4.8 Gbps). When connecting via Wi-Fi, one has to look back at the restriction set by the Internet provider. The device connected by a cable to a PC is recharged, while when connected via Wi-Fi, on the contrary, energy is consumed at an impressive rate. Connecting via USB is a very simple procedure, but not everyone will be able to organize Connect “over the air”. Only when connected via a cable can you restore data from a backup and perform a full reset.

Using USB ports to connect an iPhone also has disadvantages:

    The device is actually tied to the PC with a “string”. This limits the user’s options. to talk on the phone, he will have to interrupt “Connect“. The gadget takes up one of the USB ports. this can be a problem if there are only 2 ports on a laptop or laptop.
READ  How to view a person's location on iPhone

How to connect iPhone to computer via USB and why you need to do it?

Connecting an “apple” gadget to a PC via USB allows you to:

    Synchronize iPhone with iTunes: download music and other multimedia data to the device memory, transfer notes and contacts, transfer credentials. Create backups of the information stored in the device’s memory and restore data from backups. Restore and update the operating system. Free up device memory (which is worth its weight in gold) by transferring data to your computer hard drive.

All of this will not be possible if the USB connection between iPhone and PC becomes unstable. Correctly connecting your iPhone to your computer is pretty simple:

Take a USB cable and insert the 30-Pin or Lightning connector into the corresponding connector on the gadget.

Plug the connector on the other side into any of the USB ports on your computer or laptop.

Wait for the sound typical of a USB device connection. At the same time, the iPhone will vibrate to notify the owner that it is charging.

The message “Trust this computer?” Appears on the smartphone screen. Confirm by clicking the corresponding button.

An AutoPlay window pops up on the computer monitor. this already indicates a successful USB connection.

Go to “My Computer”. you will see your iPhone in the list of portable devices.

Click on the icon and you will access photos and videos that were taken with the iPhone camera. You will not be able to get to music in this way. you will have to install and run a program called iTunes.

Why iPhone won’t connect to computer: possible problems

The solution to the problem of connecting an iPhone via USB very often lies on the surface. Such a situation is typical: the user connected the smartphone via a cable, waited for the iPhone to notify by vibration about charging. but then nothing happens! According to the given instructions, we see that the next step is to confirm the user’s trust in the computer. “Trust Request” does not appear on the screen of a locked iPhone. It is enough just to unlock the device. a message will appear and the problem will be solved.

    If you encounter errors accompanied by SyncServer and MobileDeviseHelper messages, check if the same time is set on the PC and the gadget. Even a slight difference in time can lead to a connection failure. If the “USB device is not recognized” error, plug the cable into a different USB port on your computer. The error can also be due to the fact that the SIM card in the iPhone does not meet the requirements of the device. To connect correctly, it is enough to activate the “Airplane mode” through the “Settings”. If the computer simply does not see the iPhone, the problem lies in the cable or in the connector on the gadget itself. In any of these two cases, the user will have to spend a lot. to buy a new “lace” or to diagnose the device with subsequent repair.

USB cables for iPhone: what are there?

The USB cable for any new or refurbished iPhone is included. if there is no cable, this means one of two things: either they are trying to sell you an unoriginal smartphone (in other words, a Chinese fake), or the cable was lost by slow salon consultants who used the gadget package for their own needs.

There are two types of USB cable for iPhone:

The first is Lightning. Connectors with 8 contacts appeared on the bundled USB cables and chargers along with the 5th modification of the iPhone. The 7th modification iPhones also use Lightning to connect headphones. A distinctive feature of Lighting is that you can insert the connector into the connector from either side.

On the other side of the iPhone cable, there can now be not only a classic USB connector, but also a USB Type-C connector, which looks more like a micro-USB.

How to transfer contacts to a SIM card from a jailbroken iPhone?

If your iPhone is jailbroken, use the SIManager utility available in the BeYoIp repository to copy contacts.

We advise you to download version 1.7, as it can boast stable work.

The tweak is intuitive. any user who has managed to jailbreak will deal with it without any problems. Copying contacts is done in just two steps:

On the main screen, click the “Write To SIM” button in the lower right corner.

In the menu that appears, click “Copy iPhone To SIM”.

The SIManager application is free, but the user will have to put up with ads (which, however, does not really interfere).

How to Transfer Contacts from iPhone to SIM Using Additional Programs?

The owner of an iPhone without jailbreak will have to use another mobile device. with an Android operating system. and a utility called My Backup Contacts. You can download the program in the AppStore at this link. the application is distributed free of charge.

How to copy numbers through My Backup Contacts?

First of all, give the utility access to the “Contacts” application. click “Allow”.

When the program recounts the contacts on the gadget, click on “Backup”.

The utility will generate a file in vcf format. it must be sent by e-mail. The application itself will recommend doing this.

In the form of an e-mail in the “To” column, indicate your email address, then click “Send”.

Open the letter on your mobile device with the Android operating system. From a vcf file on a gadget with an open OS, you can easily transfer numbers to a SIM card.

You can create a backup not only in the form of a vcf file, but also in the form of an Excel document. To do this, you need to go into the application settings, find the “Export Type” section and put a tick in front of CSV.

The way to copy contacts to a SIM card via My Backup Contacts is, alas, not convenient, but there are no simpler methods now. Previously, the Yandex.Move program was recommended to users, but now it is not available either in the AppStore or in Google Play.

How to Copy Contacts from iPhone to SIM Card via Computer?

You can use a PC as an intermediary to transfer contacts from iPhone to SIM. The procedure in this case again comes down to the formation of backups and their subsequent processing on an Android device.

To copy contacts to SIM via a computer, we will use iTunes. you need to proceed as follows:

Launch iTunes and go to the device control menu by clicking on the button with the smartphone image.

In the “Settings” section, select the “Information” section.

Check the box next to “Synchronize contacts with:” and select one of the options. “Windows Contacts” or “Outlook”.

How to Fix Sim Not Supported iPhone X,8,7,6,5,4

It is recommended to select “Windows Contacts”. numbers saved in this application are easier to transfer to a mobile device.

Click the “Synchronize” button. this will start the process of data exchange between PC and mobile device.

After the synchronization on the PC is complete, click on the “Start” button and follow the path “Username”. “Contacts”.

The folder “Contacts” will contain cards with the extension contact.

These cards should be copied to a mobile device with an Android operating system. Numbers can be easily transferred from the Android background to the SIM memory.

On many sites dedicated to mobile technology, it is suggested to use the iFunBox desktop utility to transfer contacts from the iPhone. Now this method is irrelevant: the latest version of iFunBox (3.0) does not allow access to the directory of numbers.

How to Copy Contacts from iPhone to SIM Card?

In order to transfer phone numbers from a SIM card to an iPhone, the user will not experience any problems. Apple devices have a very convenient service for importing contacts. But in the opposite direction. from iPhone to SIM. it is quite difficult to transfer numbers: the famous “closed” operating system iOS affects. However, you should not despair: if you connect your imagination and some additional programs to the case, the task becomes doable.

Users who believe that the “omnipotent” iPhone is capable of performing any operation are greatly surprised when they find out that it is impossible to transfer contacts from an Apple gadget to a SIM. There is no talk about the flaw of Apple engineers in this case. the iPhone was conceived as a “closed” device.

It is possible to overcome the obstacles in the exchange of data that Apple fixes, but for this you will have to connect additional software and gadgets to the case, which are less sensitive to the confidentiality of information. Users who need to constantly copy data from the iPhone are better off jailbreaking them altogether, but they should remember that after a “jailbreak” the device is removed from the warranty.

NNCXV.INFO 2021