How to connect the pantum m6500w multifunction printer to a computer

Direct connection

How to connect any printer to a laptop, see here:

When connecting the printer to a PC via a USB cable, connect them and run the tool for configuring Pantum M6500W connection via Wi-Fi:

  • Select the required network if several appear in the list.

In the case when the access point name is not broadcast, you can enter it manually!

  • Authenticate. enter the password and select the type of network encryption.
  • If successful, a window with connection information will appear.
  • If an error occurs, you will see a similar message.
  • Check your wireless login information and try again.

When the Pantum M6500W printer is directly connected to a laptop via Wi-Fi, users can connect to the printing device without entering a password by finding it on the network. The network name will be indicated as “Pantum-AP-XXXXXX”, where instead of XXXXXX the digits of the MAC address will be indicated.

I think our readers will not have any difficulties. But in any case, you can always write in the comments and ask any question.!

and more models of printing devices use not only a standard wired method as a connection, but also a wireless version of integration into work. After all, the installation of Wi-Fi on the MFP allows you to more effectively use its capabilities by all employees of your office. In order to solve the question of how to connect the MFP to Wi-Fi, you need to do the following steps.

Connect the device to your wireless network:

  • tap on the menu screen “Wi-Fi Settings”;
  • further “Wi-Fi network status”.

Next, go to your computer to further configure the printer:

  • go through “Start” in the “Devices and Printers” menu;
  • then click at the top in the “Add Printer” panel;
  • in the window that appears, select “Add a network, wireless or Bluetooth printer”;
  • After that, the computer will make a list of available devices, in which you will select the option you need. Press “Next”;
  • the installation of the necessary drivers will occur after that;
  • then a message will appear about the successful installation of the printing device;
  • here you can set your default printer and print a test page.

It doesn’t take long to set up your printer and you can start enjoying all the benefits of a Wi-Fi connection very quickly.

Infrastructure mode

For cases where the router is compatible with WPS, the device is connected and configured by pressing a single key on the case without the participation of a computer:

  • To do this, press and hold the button for Wi-Fi connection on the MFP control panel.
  • Hold WPS on the wireless router (be sure to disconnect the network cable from the router before doing this).

Devices will automatically establish a connection even if the access point is broadcasting encrypted traffic and does not broadcast the SSID to the network.

  • Under the address bar, click “Add Printer” (in Windows 7. “Install”).
  • In the window that opens, select “Add network, Bluetooth or wireless”. If the list is empty, click on the inscription below, specify the type “TPC / IP device” and enter its IP address and port number to which it is connected.
  • Select “Special” and go to the section to change the parameters.
  • Enter your details and specify the “LPR” protocol.
  • Install drivers or wait for Windows to do it automatically.
  • Name the MFP and share it if necessary.
  • If at the 5th step there is a desired device in the list, select it.
  • After installing the drivers, the printer can be selected as the default.

Pantum m6500w WI-FI setup

Many modern printers and multifunctional devices (MFPs) are connected to computers and laptops not via classic USB, but via wireless technologies. Wi-Fi is commonly used as such an interface, especially in offices and small businesses where it is necessary to provide general access to the printing device. Let’s consider how to connect a Pantum M6500W printer via Wi-Fi and configure it for optimal performance.

Pantum connects to the network in two ways:

  • in infrastructure mode. switching is performed through a wireless router;
  • in direct connection mode. the printer connects to the laptop directly via Wi-Fi.

With any connection, the device will work with only one computer at a time!

Review and setting up printing on the Pantum MFP here:

Page 37: Configure in Infrastructure Mode 2

connect, pantum, m6500w, multifunction

Wireless settings (for models

with Wi-Fi printing)

Printers with Wi-Fi printing support, depending on the model,

two types of wireless connection, infrastructure mode and direct connection

Wi-Fi. Only one can be installed between the computer and the printer at a time.

Communication between a wireless device and

the printer is carried out through the wireless point

The wireless computer connects directly to

5.1.1. Infrastructure Mode Setup

If your printer and access point (or wireless router) support WPS

(Wi-Fi Protected Setup ™), wireless settings can be easily configured from

using the Wi-Fi button on the control panel without using a computer.

Button Configuration: Press and hold the Wi-Fi button on the panel

printer control; press the WPS (PBC) button on the access point (or wireless

router) within 2 minutes after starting WPS; the printer will be connected to

5.1.1.1. Connecting and Configuring a Wireless Network Using a USB Cable
Use a USB cable to connect your printer to your computer and run the tool

wireless network settings on your computer. The printer will try to install

connect when receiving wireless configuration information from USB.

The access point (or wireless router) must

support Wi-Fi Protected Setup ™ (WPS)
WPS should be configured with the network cable disconnected

Direct connection

How to connect any printer to a laptop, see here:

When ”connecting the printer to the PC via a USB cable, connect them and run the tool for setting up the Pantum M6500W connection via Wi-Fi:

  • Select the required network if several appear in the list.

In the case when the name of the access point is not broadcast, you can enter it manually!

  • Authenticate. enter the password and select the type of network encryption.
  • If successful, a window with connection information will appear.
  • If an error occurs, you will see a similar message.
  • Check your wireless login information and try again.

When the Pantum M6500W printer is directly connected to a laptop via Wi-Fi, users can connect to the printing device without entering a password by finding it on the network. The network name will be indicated as “Pantum-AP-XXXXXX”, where instead of XXXXXX the digits of the MAC address will be indicated.

I think our readers will not have any difficulties. But in any case, you can always write in the comments and ask any question.!

Many modern printers and multifunctional devices (MFPs) are connected to computers and laptops not via classic USB, but via wireless technologies. Wi-Fi is commonly used as such an interface, especially in offices and small businesses where it is necessary to provide general access to the printing device. Let’s consider how to connect a Pantum M6500W printer via Wi-Fi and configure it for optimal performance.

Pantum connects to the network in two ways:

  • in infrastructure mode. switching is performed through a wireless router;
  • in direct connection mode. the printer connects to the laptop directly via Wi-Fi.

With any connection, the device will work with only one computer at a time!

Review and setting up printing on the Pantum MFP here:

Infrastructure mode

For cases where the router is compatible with WPS, the device is connected and configured by pressing a single key on the case without the participation of a computer:

  • To do this, press and hold the button for Wi-Fi connection on the MFP control panel.
  • Hold WPS on the wireless router (be sure to disconnect the network cable from the router before doing this).

Devices will automatically establish a connection even if the access point is broadcasting encrypted traffic and does not broadcast the SSID to the network.

  • Under the address bar, click “Add Printer” (in Windows 7. “Install”).
  • In the window that opens, select “Add network, Bluetooth or wireless”. If the list is empty, click on the inscription below, specify the type “TPC / IP device” and enter its IP address and port number to which it is connected.
  • Select “Special” and go to the section to change the parameters.
  • Enter your details and specify the “LPR” protocol.
  • Install drivers or wait for Windows to do it automatically.
  • Name the MFP and share it if necessary.
  • If at the 5th step there is a desired device in the list, select it.
  • After installing the drivers, the printer can be selected as the default.
READ  Sony xperia does not turn on red light is on

Direct connection

How to connect any printer to a laptop, see here:

When connecting the printer to a PC via a USB cable, connect them and run the tool for configuring Pantum M6500W connection via Wi-Fi:

  • Select the required network if several appear in the list.

In the case when the access point name is not broadcast, you can enter it manually!

  • Authenticate. enter the password and select the type of network encryption.
  • If successful, a window with connection information will appear.
  • If an error occurs, you will see a similar message.
  • Check your wireless login information and try again.

When the Pantum M6500W printer is directly connected to a laptop via Wi-Fi, users can connect to the printing device without entering a password by finding it on the network. The network name will be indicated as “Pantum-AP-XXXXXX”, where instead of XXXXXX the digits of the MAC address will be indicated.

I think our readers will not have any difficulties. But in any case, you can always write in the comments and ask any question.!

Windows 2003/2008/2012 / XP / Vista / 7/8 / 8.1 / 10

Link: Pantum M6500 (or download drivers here)

Windows 2003/2008/2012 / XP / Vista / 7/8 / 8.1 / 10

Infrastructure mode

For cases where the router is compatible with WPS, the device is connected and configured by pressing a single key on the case without the participation of a computer:

  • To do this, press and hold the button for Wi-Fi connection on the MFP control panel.
  • Hold WPS on the wireless router (be sure to disconnect the network cable from the router before doing this).

Devices will automatically establish a connection even if the access point is broadcasting encrypted traffic and does not broadcast the SSID to the network.

  • Under the address bar, click “Add Printer” (in Windows 7. “Install”).
  • In the window that opens, select “Add network, Bluetooth or wireless”. If the list is empty, click on the inscription below, specify the type “TPC / IP device” and enter its IP address and port number to which it is connected.
  • Select “Special” and go to the section to change the parameters.
  • Enter your details and specify the “LPR” protocol.
  • Install drivers or wait for Windows to do it automatically.
  • Name the MFP and share it if necessary.
  • If at the 5th step there is a desired device in the list, select it.
  • After installing the drivers, the printer can be selected as the default.

How to connect Pantum 6500 to a laptop

Many modern printers and multifunctional devices (MFPs) are connected to computers and laptops not via classic USB, but via wireless technologies. Wi-Fi is commonly used as such an interface, especially in offices and small businesses where it is necessary to provide general access to the printing device. Let’s consider how to connect a Pantum M6500W printer via Wi-Fi and configure it for optimal performance.

Pantum connects to the network in two ways:

  • in infrastructure mode. switching is performed through a wireless router;
  • in direct connection mode. the printer connects to the laptop directly via Wi-Fi.

With any connection, the device will work with only one computer at a time!

Review and setting up printing on the Pantum MFP here:

Driver Installation in Windows 10

Driver installation for Pantum M6500 is required to start working with the printer. We offer to download the software on this page. follow the link. In the downloaded folder, select Setup64 (for x64, and Setup for x32) by double-clicking and then follow the step-by-step instructions.

In the window that appears, select the required installation parameters. In the first field, set the language by clicking directly on it to access the drop-down list. In it we select “Russian” with one click. We go down below and in a similar way we put the desired model near the item “Choose a printer”.

Even below, we define the installation mode by placing a marker next to “USB connection”. We study the license agreement by going to the document by the link. We put a tick “I accept the terms” and click “Install”.

When the installation process window appears, you should wait for it to complete (the green bar should reach the end). It is recommended not to start other operations at this time. Then it will take a minimum of time and the download will take place without failures.

If everything went well, a new hardware icon. a printer. will appear on the desktop. To get started or make settings, just double-click on it.

Infrastructure mode

For cases where the router is compatible with WPS, the device is connected and configured by pressing a single key on the case without the participation of a computer:

  • To do this, press and hold the button for Wi-Fi connection on the MFP control panel.
  • Hold WPS on the wireless router (be sure to disconnect the network cable from the router before doing this).

Devices will automatically establish a connection even if the access point is broadcasting encrypted traffic and does not broadcast the SSID to the network.

  • Under the address bar, click “Add Printer” (in Windows 7. “Install”).
  • In the window that opens, select “Add network, Bluetooth or wireless”. If the list is empty, click on the inscription below, specify the type “TPC / IP device” and enter its IP address and port number to which it is connected.
  • Select “Special” and go to the section to change the parameters.
  • Enter your details and specify the “LPR” protocol.
  • Install drivers or wait for Windows to do it automatically.
  • Name the MFP and share it if necessary.
  • If at the 5th step there is a desired device in the list, select it.
  • After installing the drivers, the printer can be selected as the default.

How to connect pantum m6550nw printer to WI-FI

and more models of printing devices use not only a standard wired method as a connection, but also a wireless version of integration into work. After all, the installation of Wi-Fi on the MFP allows you to more effectively use its capabilities by all employees of your office. In order to solve the question of how to connect the MFP to Wi-Fi, you need to do the following steps.

Connect the device to your wireless network:

  • tap on the menu screen “Wi-Fi Settings”;
  • further “Wi-Fi network status”.

Next, go to your computer to further configure the printer:

  • go through “Start” in the “Devices and Printers” menu;
  • then click at the top in the “Add Printer” panel;
  • in the window that appears, select “Add a network, wireless or Bluetooth printer”;
  • After that, the computer will make a list of available devices, in which you will select the option you need. Press “Next”;
  • the installation of the necessary drivers will occur after that;
  • then a message will appear about the successful installation of the printing device;
  • here you can set your default printer and print a test page.

It doesn’t take long to set up your printer and you can start enjoying all the benefits of a Wi-Fi connection very quickly.

and more models of printing devices use not only a standard wired method as a connection, but also a wireless version of integration into work. After all, the installation of Wi-Fi on the MFP allows you to more effectively use its capabilities by all employees of your office. In order to solve the question of how to connect the MFP to Wi-Fi, you need to do the following steps.

Connect the device to your wireless network:

  • tap on the menu screen “Wi-Fi Settings”;
  • further “Wi-Fi network status”.

Next, go to your computer to further configure the printer:

  • go through “Start” in the “Devices and Printers” menu;
  • then click at the top in the “Add Printer” panel;
  • in the window that appears, select “Add a network, wireless or Bluetooth printer”;
  • After that, the computer will make a list of available devices, in which you will select the option you need. Press “Next”;
  • the installation of the necessary drivers will occur after that;
  • then a message will appear about the successful installation of the printing device;
  • here you can set your default printer and print a test page.
READ  Printer saves files but does not print

It doesn’t take long to set up your printer and you can start enjoying all the benefits of a Wi-Fi connection very quickly.

Many modern printers and multifunctional devices (MFPs) are connected to computers and laptops not via classic USB, but via wireless technologies. Wi-Fi is commonly used as such an interface, especially in offices and small businesses where it is necessary to provide general access to the printing device. Let’s consider how to connect a Pantum M6500W printer via Wi-Fi and configure it for optimal performance.

Pantum connects to the network in two ways:

  • in infrastructure mode. switching is performed through a wireless router;
  • in direct connection mode. the printer connects to the laptop directly via Wi-Fi.

With any connection, the device will work with only one computer at a time!

Review and setting up printing on the Pantum MFP here:

Direct connection

How to connect any printer to a laptop, see here:

When ”connecting the printer to the PC via a USB cable, connect them and run the tool for setting up the Pantum M6500W connection via Wi-Fi:

  • Select the required network if several appear in the list.

In the case when the access point name is not broadcast, you can enter it manually!

  • Authenticate. enter the password and select the type of network encryption.
  • If successful, a window with connection information will appear.
  • If an error occurs, you will see a similar message.
  • Check your wireless login information and try again.

When the Pantum M6500W printer is directly connected to a laptop via Wi-Fi, users can connect to the printing device without entering a password by finding it on the network. The network name will be indicated as “Pantum-AP-XXXXXX”, where instead of XXXXXX the digits of the MAC address will be indicated.

I think our readers will not have any difficulties. But in any case, you can always write in the comments and ask any question.!

Connecting via infrastructure mode

Setting up Wi-Fi on the Pantum m6550nw is done according to the aLGorithm:

  • Through “start” go to the “Printers and Devices” control panel.
  • The display is looking for a block “add printer” or “install”.
  • Clicking on it brings up a list in which you select “add wireless, network or Bluetooth”. If there are no suitable devices in the registry, then click on the inscription below and indicate the type of gadget “TPC / IP device”.
  • On the system offer, enter the port number (to which the device is connected) and its IP address.
  • Select subsection “special” and move to “change parameters”. They enter their data there and indicate the “LPR” protocol.
  • Waiting for automatic installation of drivers by Windows operating system or performing it manually.
  • Give the name of the MFP and, if necessary, make it public.

Important! After installing the necessary drivers, you can select the printer as the default.

Infrastructure mode

For cases where the router is compatible with WPS, the device is connected and configured by pressing a single key on the case without the participation of a computer:

  • To do this, press and hold the button for Wi-Fi connection on the MFP control panel.
  • Hold WPS on the wireless router (be sure to disconnect the network cable from the router before doing this).

Devices will automatically establish a connection even if the access point is broadcasting encrypted traffic and does not broadcast the SSID to the network.

  • Under the address bar, click “Add Printer” (in Windows 7. “Install”).
  • In the window that opens, select “Add network, Bluetooth or wireless”. If the list is empty, click on the inscription below, specify the type “TPC / IP device” and enter its IP address and port number to which it is connected.
  • Select “Special” and go to the section to change the parameters.
  • Enter your details and specify the “LPR” protocol.
  • Install drivers or wait for Windows to do it automatically.
  • Name the MFP and share it if necessary.
  • If at the 5th step there is a desired device in the list, select it.
  • After installing the drivers, the printer can be selected as the default.

Instructions for installing the driver in Windows 10

For the correct connection of the laser MFP, we suggest downloading the Pantum M6500W driver from the page of our website. The software is free, distributed under the license of the developer company. Software installation is usually straightforward, but to avoid mistakes, with step-by-step instructions.

Find the Autorun.exe file in the downloaded folder. It is an automatic installer that performs basic setup and configures the software according to the operating system you are using.

Click I Agree. This action confirms the user’s agreement with the terms of use of the developer’s licensed products.

Check that the printing equipment is connected correctly and that the MFP is ready for work. Specify the method of connecting the PC to the device.

Find your device model in the dropdown list. If necessary, change the language of the “Setup Wizard” interface. After checking the correctness of the selected parameters, click “Install”.

Wait for a message about the successful installation of the driver appears in the working window of the program. After that, click “Finish” to close the installer and start working with printing equipment.

Connecting via infrastructure mode

How to connect Pantum m6500 printer to laptop via Wi-Fi? If the router is compatible with the WPS function, then the connection is made through the keys on the body of the device. The computer does not participate in debugging. The procedure follows the following aLGorithm:

  • The MFP needs to be turned on and wait for the ready-to-work signal.
  • Press the Wi-Fi connection button on the control panel.
  • Press the “WPS” button on the router. before manipulating it, you must disconnect the network cable.

Important! Automatic connection establishment will occur in any case, even if the access point does not broadcast to the SSID network and works with an encrypted traffic type.

Direct connection

When connecting the printer to a PC via a USB cable, connect them and run the tool for configuring Pantum M6500W connection via Wi-Fi:

  • Select the required network if several appear in the list.
  • Authenticate. enter the password and select the type of network encryption.
  • If successful, a window with connection information will appear.
  • If an error occurs, you will see a similar message.
  • Check your wireless login information and try again.

When the Pantum M6500W printer is directly connected to a laptop via Wi-Fi, users can connect to the printing device without entering a password by finding it on the network. The network name will be indicated as “Pantum-AP-XXXXXX”, where instead of XXXXXX the digits of the MAC address will be indicated.

Option ”No. 2: Connect by entering the SSID and password

This method is suitable for all printers with a display.

  • We go into the menu and select the settings (Setup). We click on the section “Wi-Fi Settings”.
  • Next, click on “WI-FI setup”, “Wi-Fi setup wizard”.
  • You should see a list of Wi-Fi networks. Enter your SS

After completing all the steps correctly, you will see that the Wi-Fi icon will light up green.

How the printer works and prints

When you press the power button, the printer takes about 20 seconds to enter the operating mode. The sound of the start-up of the cooling turbine and the operation of the motors is quite quiet and does not hurt your ears. Until the printer is connected to your home Wi-Fi network, the corresponding light on the control panel blinks. When the printer is fully ready for use, only the bottom light blinks

The capacity of the Passport Tray is 150 sheets. For the sake of experiment, I placed all these sheets in it, and there was still free space up to the stops. Even when the tray is full, pages are picked up by the feed mechanism with confidence, without gaps, which is commendable. But, in duplex printing, when the printed sheets are already curled down, the page capture often does not occur.

READ  How to connect the printer to an HP wireless network

Paper exits to the upper double folding tray, but due to the high heating temperature of the sheets, they neither bend or stack evenly, nor do they tend to fall off it, shifted by subsequent output documents. To avoid this, it is best to manually hold the paper in the receiving shelf at least at the beginning of printing.

During printing, the printer itself practically does not heat up, and hot air is blown out from the back. But the paper itself heats up to about 50 degrees during prolonged printing, which raises the suspicion of excessive heating of the laser unit with a large print volume (more than 30 pages). However, the test print of 50 pages of text in a row was successful, which indicates the high reliability of the printer’s cooling system.

MFP M6500 Series M6600

Compact, entry-level MFPs. The best deal for home users and small businesses.

Take up minimal space on your desk, printer, copier and scanner (and in the M6600 series and fax) in one convenient and economical device. Easy refilling even at home using original refueling kits.

Models and specifications

M6607NW

Laser electrophotographic printing

Recommended Monthly Print Volume

First copy out time

Maximum number of copies

ID copy, Receipt copy, N-up copy, Clone copy

Maximum scan area

Hopper capacity

Types of print media

Paper (plain, thin, heavy), OHP transparencies, postcard, and envelope

Print media formats

A4, A5, JIS B5, IS0 B5, A6, Letter, Legal, Executive, Folio, Oficio, Statement, Japanese Postcard, Monarch Envelope, DL Envelope, C5 Envelope, C6 Envelope, 0 Envelope, ZL Large 16K, Large 32K, 16K, 32K, B6

Density of print media

Operating system compatibility

Microsoft Windows Server2003 / Server2008 / Server2012 / XP / Vista / Win7 / Win8 / Win8.1 / Win10 (32/64 Bit)

Mac OS 10.6 or higher, Linux Ubuntu 12.04 / 14.04

Power Options

Printing: 370W, Ready: Less than 45W, Sleep:

52dB printing, ≤54dB copying, ≤54dB scanning, ≤30dB idle

Operating relative humidity

24 (twenty four) months from the date of sale

Starter Cartridge PC-210E (1600 pages, refillable)

Laser electrophotographic printing

Recommended Monthly Print Volume

First copy out time

Maximum number of copies

Maximum scan area

Hopper capacity

Types of print media

Paper (plain, thin, heavy), OHP transparencies, postcard, and envelope

Print media formats

A4, A5, JIS B5, IS0 B5, A6, Letter, Legal, Executive, Folio, Oficio, Statement, Japanese Postcard, Monarch Envelope, DL Envelope, C5 Envelope, C6 Envelope, 0 Envelope, ZL Large 16K, Large 32K, 16K, 32K, B6

Density of print media

Operating system compatibility

Microsoft Windows Server2003 / Server2008 / Server2012 / XP / Vista / Win7 / Win8 / Win8.1 (32/64 Bit)

Mac OS 10.6 and higher, Linux Ubuntu 12.04 / 14.04, iOs 6.0. 8.2, Android 2.3. 4.4

Power Options

Printing: 370 W, Ready: Less than 45 W, Sleep:

52dB printing, ≤54dB copying, ≤54dB scanning, ≤30dB idle

Operating relative humidity

24 (twenty four) months from the date of sale

Starter Cartridge PC-210E (1600 pages, refillable)

Laser electrophotographic printing

Recommended Monthly Print Volume

First copy out time

Maximum number of copies

ID copy, Receipt copy, N-up copy, Clone copy

Maximum scan area

216 x 297mm (flatbed). 216 x 356mm (ADF)

Hopper capacity

Types of print media

Paper (plain, thin, heavy), OHP transparencies, postcard, and envelope

Print media formats

A4, A5, JIS B5, IS0 B5, A6, Letter, Legal, Executive, Folio, Oficio, Statement, Japanese Postcard, Monarch Envelope, DL Envelope, C5 Envelope, C6 Envelope, 0 Envelope, ZL Large 16K, Large 32K, 16K, 32K, B6

Density of print media

Operating system compatibility

Microsoft Windows Server2003 / Server2008 / Server2012 / XP / Vista / Win7 / Win8 / Win8.1 (32/64 Bit)

Mac OS 10.6 and higher, Linux Ubuntu 12.04 / 14.04, iOs 6.0. 8.2, Android 2.3. 4.4

Power supply parameters

Printing: 370 W, Ready: Less than 45 W, Sleep:

52dB printing, ≤54dB copying, ≤54dB scanning, ≤30dB idle

Operating relative humidity

24 (twenty four) months from the date of sale

Starter Cartridge PC-210E (1600 pages, refillable)

Laser electrophotographic printing

Recommended Monthly Print Volume

First copy out time

Maximum number of copies

ID copy, Receipt copy, N-up copy, Clone copy

Maximum scan area

216 x 297mm (flatbed). 216 x 356mm (ADF)

PC-FAX, Junk Fax Numbers, Multi-send, Fax Forwarding, Quick-Dial, group dial,

Delayed Send, Auto Redial, Auto Receive, Auto Reduction, Mobile fax

Hopper capacity

Types of print media

Paper (plain, thin, heavy), OHP transparencies, postcard, and envelope

Print media formats

A4, A5, JIS B5, IS0 B5, A6, Letter, Legal, Executive, Folio, Oficio, Statement, Japanese Postcard, Monarch Envelope, DL Envelope, C5 Envelope, C6 Envelope, 0 Envelope, ZL Large 16K, Large 32K, 16K, 32K, B6

Density of print media

Operating system compatibility

Microsoft Windows Server2003 / Server2008 / Server2012 / XP / Vista / Win7 / Win8 / Win8.1 (32/64 Bit)

Mac OS 10.6 and higher, Linux Ubuntu 12.04 / 14.04, iOs 6.0. 8.2, Android 2.3. 4.4

Power supply parameters

Printing: 370W, Ready: Less than 45W, Sleep:

52dB printing, ≤54dB copying, ≤54dB scanning, ≤30dB idle

Operating relative humidity

24 (twenty four) months from the date of sale

Starter Cartridge PC-210E (1600 pages, refillable)

Infrastructure mode

For cases where the router is compatible with WPS, the device is connected and configured by pressing a single key on the case without the participation of a computer:

  • To do this, press and hold the button for Wi-Fi connection on the MFP control panel.
  • Hold WPS on the wireless router (be sure to disconnect the network cable from the router before doing this).

Devices will automatically establish a connection even if the access point is broadcasting encrypted traffic and does not broadcast the SSID to the network.

  • For Wi-Fi settings of Pantum M6500W, open the Start item or Control Panel “Devices and Printers”.
  • Under the address bar, click “Add Printer” (in Windows 7. “Install”).
  • In the window that opens, select “Add network, Bluetooth or wireless”. If the list is empty, click on the inscription below, specify the type “TPC / IP device” and enter its IP address and port number to which it is connected.
  • Select “Special” and go to the section to change the parameters.
  • Enter your details and specify the “LPR” protocol.
  • Name the MFP and share it if necessary.
  • If at the 5th step there is a desired device in the list, select it.
  • After installing the drivers, the printer can be selected as the default.

Pantum M6500W Wi-Fi connection: simple instructions

Many modern printers and multifunctional devices (MFPs) are connected to computers and laptops not via classic USB, but via wireless technologies. Wi-Fi is commonly used as such an interface, especially in offices and small businesses where it is necessary to provide general access to the printing device. Let’s consider how to connect a Pantum M6500W printer via Wi-Fi and configure it for optimal performance.

Pantum connects to the network in two ways:

  • in infrastructure mode. switching is performed via a wireless router,
  • in direct connection mode. the printer connects to the laptop directly via Wi-Fi.

With any connection, the device will work with only one computer at a time!

Review and setting up printing on the Pantum MFP here:

Direct connection

How to connect any printer to a laptop, see here:

When connecting the printer to a PC via a USB cable, connect them and run the tool for configuring Pantum M6500W connection via Wi-Fi:

  • Select the required network if several appear in the list.

In the case when the access point name is not broadcast, you can enter it manually!

  • Authenticate. enter the password and select the type of network encryption.
  • If successful, a window with connection information will appear.
  • If an error occurs, you will see a similar message.
  • Check your wireless login information and try again.

When the Pantum M6500W printer is directly connected to a laptop via Wi-Fi, users can connect to the printing device without entering a password by finding it on the network. The network name will be indicated as “Pantum-AP-XXXXXX”, where instead of XXXXXX the digits of the MAC address will be indicated.

I think our readers will not have any difficulties. But in any case, you can always write in the comments and ask any question.!

NNCXV.INFO 2021