How to connect the soundbar to a Samsung TV

Optical and coaxial input

They also actively use optical and coaxial input when connecting.

connect, soundbar, samsung

This option is relevant if there is no HDMI connector on the equipment. In the vast majority of cases, the connection can be made through an optical or coaxial input. This is due to the fact that the bulk of sound systems are equipped with them. By analogy, install game consoles to TVs.

To connect the new soundbar to the TV, you need the optical or coaxial cable itself, which connects 2 devices to each other. That is, the TV and the soundbar itself. Next, go to the audio settings of the TV, select the connected external device as the sound source. Sound control will be carried out through the interface of the soundbar itself. This is a conditional drawback, since when using the HDMI interface, remote control can be used through the corresponding TV remote control.

Instructions for self-connecting the soundbar to the TV

Soundbars are an excellent alternative to the massive speaker systems used in TVs to create a complete home theater experience. They are also actively used in combination with computers.

Soundbar can rightly be called a new and innovative product in the audio equipment segment. These are dedicated soundbars that are compact, feature rich and easy to use.

Despite the modest size of the device, the sound generated is almost in no way inferior to the speakers and subwoofer that form the speaker system.

To use the soundbar to its full potential, it must be properly connected to your TV.

Equipment types

Despite the fact that soundbars have appeared relatively recently, the range of such systems is already huge. It is offered by different manufacturers in different designs. There are more budget, advanced and premium models.

The soundbar features a compact, elongated body. This allows you to easily place it on a stand under the TV, just put it on the floor or hang on the wall.

The equipment can be divided into 2 categories:

  • Active soundbars. The most popular analogue for home theater speaker systems. These soundbars are used as independent audio systems. To connect, just connect the TV and panel outputs, and you’re done.
  • Passive soundbars. These panels are sometimes described as 2-in-1 or 3-in-1 speakers. There is no built-in amplifier. Requires connection to theater receiver or external amplifier to play sound.

Objectively, it is the first option that is considered more preferable.

Before determining how best to connect the purchased soundbar to the TV, you need to understand what kind of device the user is dealing with.

There are several main types of soundbars:

  • Monocolumn. Has a built-in subwoofer. A kind of active soundbars. Differs in compact size and affordable price. There are only the most basic functions that allow you to use the mono speaker as a television acoustic system. Mono speakers easily connect to TV, computers, laptops, smartphones, etc.
  • Sound projector. Place them only on flat surfaces. There is also a built-in subwoofer. The cone of the woofers is directed downward, allowing you to change the bass settings. Several functions are provided here at the same time. This is a receiver, amplifier and acoustics.
  • Passive panels with separate subwoofer. This is a multi-channel sound system that can easily replace a serious home theater speaker. At the same time, the dimensions are quite compact, which allows you to minimize the occupied space. Such complexes create the most effective sound when watching a movie, forcing viewers to immerse themselves in what is happening on the screen. The connection is usually via Bluetooth or wires.
  • Soundbase. It resembles a TV stand in shape. These are multichannel speaker devices, often come with a DVD player and other additional functions for Smart TV.
  • Multifunctional panels. These are systems that have a separate subwoofer and multiple speakers. Communication between them is carried out via Bluetooth. Columns can be placed around the perimeter of the room.

Which of this variety to choose, each buyer must decide for himself. Buying a soundbar is not budgetary, but the investment is fully justified. All that remains is to connect.

Connection options

To get the desired sound effect from the connected soundbar, you need to perform a competent installation, combine the TV and the soundbar with each other.

This can be done in several ways. The best way to connect a new soundbar to an existing TV depends largely on the capabilities of the equipment itself and the characteristics of placement in the house.

  • HDMI;
  • Bluetooth;
  • optical input;
  • coaxial input;
  • analog connector.

Now each option should be considered separately.

Objectively, the most correct choice would be to connect the soundbar to your TV using the HDMI interface. The thing is that through HDMI it is possible to achieve the maximum quality of sound and image. It is a modern and functional interface.

Before using this option, make sure that the equipment supports this HDMI ARC (Audio Return Channel) technology. This is necessary to ensure that the audio signal from the TV is output to the soundbar. After connecting the cable, in the audio settings on the TV, you will need to select the sound source through an external device. By default, the TV-integrated speakers are used as the audio source.

If the HDMI interface supports ARC technology, this will allow audio signals to be transmitted from all devices that connect to the TV. That is, listening will be carried out through the soundbar, and the sound can be controlled through the TV remote control.

It is also worth looking at the TV manual to determine how to convert multi-channel audio from DVD and Blu-ray systems. Sometimes the best solution is to directly connect the signal from these devices. After all, many modern TVs have 2 HDMI connectors at once. Alternatively, digital audio input is an alternative.

Objectively, HDMI connection is the best in terms of sound quality.

Wireless connection

Here we are talking about a wireless connection using Bluetooth technology. This connection differs in that you do not need to use wires here. If we talk about modern models of soundbars, but most of them support this function. Audio signal can be transmitted from TV, smartphone, tablet and laptop.

To make a connection, you need to pair the receiver, that is, the soundbar, and the signal transmitter. But this task is not always easy to accomplish.

In order to simplify wireless connectivity, NFC technology has begun to be used for soundbars. That is, Near Field Communication. With its help, it is enough to bring the transmitter to the area on the soundbar case, where there is a corresponding mark. That’s it, the connection is ready. This is true when playing audio through a tablet or smartphone. This technology is not used very often to connect the TV and the soundbar.

In fact, users have a need to connect two devices with a suitable cable, that is, a TV and a soundbar, and then make the settings. And then the settings are needed if the TV does not automatically detect the connected audio equipment.

Therefore, there is nothing fundamentally complicated here. Even if the TV does not automatically detect the soundbar as a sound playback device, just go to the TV settings and select the soundbar manually, choosing the soundbar as the default device.

Unlike a home theater system, connection and setup is greatly simplified here. This allows you not to involve third-party specialists and not spend additional money to pay for their services.

Possible connection problems

Before you can connect your soundbar to your TV yourself, Honor needs a few things to consider:

  • Basically, connecting audio equipment to TV does not cause any particular difficulties. But in some cases, there are sound problems caused by poor connection of the jack to the plug. Here the problem usually lies in the quality of the components themselves, or in a trite not fully inserted plug.
  • Some newbies also break the sequence of the plug-in cords. than once, specialists who came to the rescue saw how the green plug for some reason was in the red socket, and the white plug in the black one. If you break the sequence, the system will simply be silent, and no sound will appear. Exactly until the plugs are inserted into their sockets in the soundbar.
  • The cause of the disturbance in sound can sometimes lie not in hardware, but in software malfunctions. Basically, this is the experience of users connecting the soundbar to a computer. But software crashes on TV are not uncommon. Sometimes the problem is solved by a simple reboot, software update, or a complete flashing if the situation is serious.
  • Sometimes the sound is muted if the electricity goes out. The next time you turn on the TV, the soundbar is silent. In this case, it is recommended to reboot the system, re-enter the settings. Sometimes the simplest procedure helps: the equipment is disconnected from the socket for 5-10 minutes and then turned on again. After that, the performance is restored.

Users rarely encounter such problems when connecting high-quality soundbars. But you should not exclude the possibility of their appearance.

Analog connector

Another alternative is the analog connector. The problem with using an analog connector, that is, simple tulips, is that the resulting sound is far from the possibilities offered by the soundbar. That is, the potential of the system will not be fully used. Analog connectors are available in white and red RCA jacks. To connect the soundbar to your TV, you will need to use an RCA-mini Jack adapter.

Connection recommendations

There are several options for how you can connect the soundbar to an LG TV or TV from another manufacturer. It all depends on the specific TV model and on the audio panel used.

In general terms, you can connect the soundbar to a modern TV from Samsung in about the same way as in the case of Xiaomi, Sony (Sony) or Philips (Philips) TVs. The meaning is the same everywhere. The two devices are connected to each other with a cable, after which the connection is configured as necessary. The settings menu interface may have different designs, but the set of options, sections and features is almost identical everywhere.

It turns out that connecting a soundbar to your Xiaomi TV is no more difficult than to a TV from LG or Samsung.

It is also important to correctly configure the connected soundbar to your own TV brand Samsung, Philips, Sony, etc. To do this, press the button on the remote control to enter Settings, select the Audio section, and there you already define the playback source, change a few basic parameters.

For the connection to be successful and functional, there are a few helpful tips to follow:

  • When choosing a device, you must first make sure that it is compatible with your TV. To do this, take a look at the available installation and connection options, offered functionality and interface.
  • It is recommended to buy only those soundbars that are trusted and in demand in the market. And these are the products of leading manufacturers. A prerequisite is the availability of a guarantee.
  • Connection is made only when the equipment is disconnected. Power should be supplied to the TV and soundbar only when everything is connected and ready to work.
  • Do not under any circumstances try to damage the integrity of the soundbar case. This can lead to unpredictable consequences. Most often to the rather sad.
READ  How to find your Samsung phone if you lost it

There should be no particular difficulties with connecting a modern soundbar to a TV, if they are compatible, there are all the necessary components to connect two devices. Beforehand, you should carefully study the manufacturer’s instructions and use it as a basic guide for performing installation, connection and settings.

Location

If the TV is on a sideboard, counter, rack, table or chest of drawers, then the soundbar can simply be placed directly in front of it. It is necessary, however, to measure the distance from the surface of the stand to the screen and check if the soundbar will fit in this gap and will not obstruct the image. But this arrangement is ideal. the sound will come almost “out of the picture”.

If you want to install the soundbar inside the rack, then it should be pushed as far forward as possible so that the side walls of the rack do not interfere with the sound. It should also be borne in mind that soundbars that support Dolby Atmos and DTS: X should not be placed inside racks. as they work with sound bounced off the ceiling to create vertical audio effects.

It is better not to cover the front and side panels of the soundbar with anything or obstruct the sound propagation. Although the photo is shown differently

If the TV is hanging on the wall, then the soundbar can also be screwed under it. many models are equipped with wall mounts. It can be placed both under the TV and above it, but from below it is still better, since the height of the sound source is about the same as that of the listeners, and this option looks prettier, in our opinion. Soundbars are often supplied with mounts and / or paper templates that will make it easy to mark the wall for the holes for the screws.

Bluesound Pulse Soundbar can even be attached to a TV stand

If there are no mounts included with the soundbar, you should refer to the user manual and see if it can, in principle, be hung on the wall, and what the manufacturer recommends to purchase for this.

What to choose: soundbar or audio TV stand?

Another version of the soundbar is a TV stand. Its speakers and connection options are classic soundbar, but the size (depth and width) allows you to install a TV directly on its top panel.

These stands work well with TVs that have one center leg. That is, for example, it is not a fact that TVs with legs located at the edges will be able to fit on such a stand: the legs may be too wide apart, and the stand may be too narrow.

In addition, the height of such a stand can be greater than the distance from the shelf on which the TV stands to its frame. These factors need to be considered if TV stands are more popular with classic soundbars.

Depending on the brand, such devices are called differently: audio console, sound platform, sound stand, and so on.

Basic connections

When it is already clear how exactly to position the soundbar, you should think about how to connect a TV and other devices to it. In the case of a wall mount, you must first connect everything, and then hang up the soundbar.

The photo below shows the connectors that can be found on the soundbar. Of course, the location and captions may vary depending on the brand and model, but this photo illustrates well the “hospital average” option.

From left to right, the digital optical input, digital coaxial input, and analog stereo input are shown, and the corresponding cable plugs are shown below the connectors. The digital connection is best for transferring the TV signal to the soundbar. If the TV, with which you plan to make friends with the soundbar, does not know how to do this, you should use an analog connection. If the TV is ready to connect both digitally and analogously, then you should choose to your taste.

Now you need to make sure that the TV is sending the audio signal to the soundbar to which it is connected by cable. To do this, go to the TV sound settings menu, turn off the built-in TV acoustics and turn on the option to work with external acoustics. In the same place, it is quite possible that the TV will offer to choose which output it will send the audio signal to. digital or analog. But smart TVs themselves determine which input and what is connected to them.

In theory, external acoustics are selected only once. If you want to watch something through the built-in audio system of the TV, you will need to go into the settings again, turn off the soundbar and turn on the built-in speakers. And then do all the manipulations again.

The digital coaxial input can be used to connect Blu-ray, DVD players, and other digital sources that have such an output. If they lack a coaxial output, they most likely have optics or an analog.

Another connection option (not shown in the picture) is a 3.5 mm minijack. It either replaces the analog stereo inputs or is adjacent to them. The minijack is convenient for connecting portable digital audio devices. However, they can also be connected using an RCA-mini-jack adapter, which is sold separately.

Setting up soundbars with a subwoofer

If your soundbar comes with a subwoofer, you need to find a suitable place for it. You need to place it, firstly, conveniently (that is, next to the outlet), and secondly, so that it sounds.

The sub, standing in the right place (where it booms best), needs to be synchronized with the soundbar. A correctly positioned subwoofer should sound at the same volume as the soundbar.

Bose SoundTouch 300 Soundbar and AcoustiMass 300 Subwoofer with Virtually Invisible 300 Wireless Speakers

First, you should check if the soundbar remote control has buttons for controlling the volume of a separate soundbar and a separate subwoofer. If so, it will be much easier to sync devices. You also need to see if the soundbar has a master volume control. It will allow you to simultaneously adjust the volume of the soundbar and subwoofer, maintaining balance, and you do not have to synchronize the volume levels of devices every time.

connection options

In addition to the digital optical, digital coaxial and analog stereo inputs, which we talked about in the last section, higher-end soundbars are equipped with other connectors. They are visible in the photo.

HDMI. Using the HDMI input, you can transfer the video signal from the DVD / BD player and TV set-top box to the TV through the soundbar. The soundbar passes the video signal through itself, without changing it in any way, but pulls out the sound from the broadcast and independently decodes / processes it.

This solution reduces the mess of wires: there is no need to connect the TV with a separate cable to both the video source and the soundbar. over, the soundbar is capable of supporting HDMI ARC (Audio Return Channel). then the TV sends the audio signal to the soundbar using the same HDMI cable that the soundbar uses to transfer video to the TV. This again reduces the number of cables required.

To use this function, you need to activate it in the HDMI menu of your TV. Before doing this, it is best to consult the user manuals for both the soundbar and the TV, as different brands have these settings in different sections.

Subwoofer output. Many soundbars have a subwoofer output. If your custom soundbar has one, you can physically connect an external subwoofer to it. Very often soundbars need subwoofers as low-frequency support for a more complete movie viewing.

And while soundbars often come with a subwoofer, some aren’t weighed down by them. But if there is a connector, you can add a subwoofer to the system yourself. Many soundbars that come with a subwoofer wirelessly connect to the subwoofer to reduce the number of cables they need, even if they have the right jack.

Ethernet port. Another connection option is the Ethernet port. Soundbars with this connector can be connected to your home network, and through it. to streaming services. Or even integrate into a multi-room system.

Often soundbars with an Ethernet port are equipped with Wi-Fi, which, again, does not require cables. Here it is already worth choosing which network connection option is more convenient for a particular case.

How to connect and set up a soundbar [translation]

Nowadays, those who want to improve the sound of their TV are increasingly choosing soundbars. They are compact, virtually wiredless, and easier to set up than full-size home theater systems. However, soundbars are suitable not only for scoring TV programs: additional devices can be connected to different models that can expand the functionality of the soundbar. Here are some tips for purchasing and setting up soundbars.

Soundbars with surround sound system

There are also some soundbars that come with a subwoofer and satellites for surround sound. In these systems, the subwoofers are wireless, but the satellites are attached to the subwoofer with cables.

The soundbar is responsible for the front channels. left, center and right, but sends bass and surround channels to the subwoofer. The subwoofer redirects the signal to the satellites, and itself hums with bass.

In such a situation, there are no wires that stretch from the TV to the rear channels, but the satellites still need to be connected to the subwoofer, and the subwoofer, for this reason, should be located in the back of the room.

Heos Bar multi-room soundbar paired with Heos Subwoofer, complemented by Heos 1 speakers

How to Connect a Soundbar to your Samsung TV

On the other hand, some soundbars, for example, the Sonos Playbar and the Polk Audio SB1 Plus, allow you to connect a pair of wireless speakers to them, which do not need to be connected to a subwoofer with a cable. but you should still plug them in. This solution is more expensive, but more convenient.

If the soundbar being tuned can work with surround speakers, then it is best to place them behind the listening point, offset from the center of degrees by 10-20. Also, the satellites should be moved a couple of inches away from the corners of the room and side walls. The subwoofer to which they may need to be connected should be moved along the back wall to find a location where it produces deep yet clear bass.

READ  Transfer Samsung photo to memory card

After everything is connected, it is necessary to equalize the volume of not only the subwoofer, but also the satellites. so that they do not clog the soundbar, but also do not get lost. You need to see if there are buttons on the remote to control the volume of specifically satellites. After synchronization, you can control the volume using the main knob without the need for adjustment, if there is one, of course.

Why HDMI is needed?

Because they can carry large amounts of uncompressed digital audio data, the HDMI cable can handle any sound system from 5.1 to 7.1 surround sound and beyond.

They can also handle new cinematic experiences like DTS: X and Dolby Atmos, but you’ll need to make sure you’re plugging it into the correct port.

Most HDMI ports on TVs are for input only, meaning they cannot send anything from the TV, they can only receive data from what they are connected to.

How to connect the soundbar to your TV via the headphone jack?

Some TVs, such as JVCs, have the option to change the function of the headphone jack to “line out” in the settings, which means that you do not need to adjust the sound parameters.

If your TV doesn’t have this option, you’ll need to adjust the volume, bass, and treble until you’re happy with the sound. but remember that everything plugged into the headphone jack is at a reduced volume for safety reasons, so you will need to turn up the TV volume much higher than usual and remember to turn down the volume again before unplugging the soundbar.

Now you know more about soundbar connections, check out our range of soundbars.

How to connect the soundbar to your TV via 3.5mm line out?

With a 3.5mm line-out jack, you just need to make sure you’re using the one labeled “line-out” on your TV, not the headphone jack. because they look the same.If you plug the soundbar into your TV’s headphone jack, the sound is likely to be terrible, so it’s best to check first if your TV has a line-out port.

Once you’ve connected your line-out cable, just plug the other end into your soundbar and you’re good to go.

How to connect a soundbar to a Samsung TV

Have you invested in a soundbar to enhance your Samsung experience? Need help setting up? Don’t worry, here’s a simple guide to help you!

To connect via HDMI:

To connect via Bluetooth:

Here’s a small example of what’s on offer: https: // www.Samsung.com/uk/audio-video/

4 ways to connect your soundbar to your TV

Enhancing the sound quality on your TV with a soundbar can be a game-changer for your ultimate entertainment experience. But with a large selection of different cables and connectors, it can be tricky to know which one to use to get the most out of your kit.

There are two approaches to connecting your soundbar to your TV:

  • Use your soundbar as a hub and run multiple devices through it, which means you only need one cable to your TV.
  • Set up the soundbar as a speaker and connect all other devices to the TV, then connect the TV to the soundbar.

These options depend on the soundbar itself and whether your TV is ARC-compatible. Let’s start with the option that provides the best sound quality.

HDMI

HDMI cable. by far the best way to connect your soundbar to your TV.

Using an optical or coaxial cable

Most audio devices have a dedicated Toslink interface. It just makes it possible to connect via an optical cable. The standard does not affect the sound quality in any way. In our case, it is comparable to HDMI.

How to connect an optical cable to your TV and soundbar:

  • We connect the cable with one side to the soundbar, and the other to the TV.
  • On the TV, go to the menu, and then to the “Sound Out” section.
  • We are waiting for the appearance of the inscription on the soundbar “LG OPT”. this means that the pairing was successful.

Depending on the brand and model of the TV, the section names may differ, but usually everything is intuitive.

Connectors for digital coaxial cable are much less common in TV receivers. They can replace optical connections. The connection process itself is practically the same, it is enough to insert the corresponding cord with one side into the Digital / COAX connector on the TV, and the other into the soundbar. Sound quality remains good with this connection.

Wi-Fi / Bluetooth connection

All modern soundbars are wireless. over, the TV does not have to be the control device. The signal can be transmitted from a phone, tablet, laptop or other device. The main connection condition is to check that both devices support this type of wireless communication. If your stationary PC or soundbar does not have Bluetooth support, an external receiver that adds this function is a good solution.

How the soundbar is connected to a Samsung TV:

  • Launch the visibility of the soundbar via Bluetooth. This may be active by default or you will need to press an additional button on the case (remote control).
  • On the TV, go to “Settings” in the “Bluetooth” section and start searching for devices.
  • We are waiting for the detection of the soundbar and click on it to create a connection.
  • You may need to enter your password now. Default: 0000 or 1111.

An even more functional wireless technology is Wi-Fi. It also sets up a connection to a TV. To set up picture output, sometimes you need to additionally establish an HDMI connection. In this case, the soundbar will pull content from the Internet and display it on the TV screen. To connect, you need to go to the settings of the soundbar and start the search in the “Wireless connection” section, and then click on the access point and enter the password for it. Sometimes it is enough to connect a TV with a soundbar to the same Wi-Fi network, and they will automatically find each other.

Analog connection

In the case of older TVs, where there is no possibility of using digital connections, it is worth resorting to the only alternative in the form of an analog interface. It is popularly known as “tulips” or RCA ports. The main condition is to check in advance the TV and soundbar for the presence of the corresponding inputs. With such a connection, you cannot count on high-quality sound.

Where better to install the soundbar?

There are a few tricks to the placement of the audio system that will allow it to act out “correctly” without distortion.

  • Installing under the TV is the best option in terms of saving workplace and sound quality. Here the soundbar can be fixed using a wall mount or placed on a pedestal.
  • Place in front of TV. This is true if the TV is installed on a special cabinet. It will feel like the sound and picture are in sync.
  • The optimal height is at the level of a person’s head or body. In this case, the signal goes directly to the listener, which means that the high frequencies will sound much larger and brighter.
  • Do not install away from TV. Side placement of the soundbar in relation to the TV will result in a loss of surround sound, Accent on the image will constantly shift.

Connecting the soundbar to a TV

If you have already chosen one of the good soundbars from JBL, Samsung, Philips or another brand, it’s time to move on to setting up the connection between the device and the TV. There are many methods of synchronization today. We will cover the main ones, since each has its own strengths and weaknesses.

How do I connect the soundbar to my TV? Instructions

All TV manufacturers, including Samsung, LG, Sony and other well-known brands, try to make their products of high quality in every sense. These companies have achieved significant results, even in the area of ​​sound. Despite the compact dimensions and minimal thickness of the TV case, most models have stereo speakers. A pair of sound emitters of 5-10 W each is enough for watching movies, but it will be too little for listening to music. The solution is a soundbar. a soundbar with better, more balanced and richer sound. We have already described the best models earlier, but now we will tell you how to connect the soundbar to the TV and do it right.

Via HDMI

This option. best for connecting a soundbar. Although it requires a cable that can be dispensed with in the case of Bluetooth, HDMI offers high data transfer rates. It is he who allows you to fully reveal the capabilities of the soundbar. In addition, it reduces audio latency to a minimum, preventing audio and video out of sync.

Today, HDMI ARC technology is actively used. a system with a reverse audio signal that allows you to replace many other cables. For it to work, you need appropriate support from both the TV and the soundbar. Almost all modern models, even the budget category, support the ARC system. If it refuses to work, you should check if Control for HDMI is active and find information about Auto Return Channel in the technical documentation.

What to do if there is no sound after connecting?

Sometimes a situation arises when everything seems to be connected correctly, but the sound continues to be played from the TV or completely disappears.

  • we check the quality of the connection. The cable may just not be fully inserted into one of the connectors.
  • change the connection port. If there is the same input, we try to switch to it.
  • we investigate the quality and serviceability of the cable. Any creases, constrictions and other defects should cause alertness. It is better to purchase a new, known good wire.
  • change the settings. In the TV menu, sometimes you need to additionally set the port to which the sound will go. It is usually called: “Sound Outputs”, “Sound Out” or simply “Sound”.

Provided that the connectors are intact, and the devices themselves support the selected type of connection, everything should work smoothly. When all the options have been tried, and the situation does not change, the budget option will be to switch to using a different type of connection.

We hope users were able to connect the soundbar to the TV and the sound is working properly. It should be an order of magnitude better than the built-in TV speakers. If something went wrong, leave comments with a detailed description of the problem, and we will try to help fix them.

Solved: HW-MS650 Soundbar Wi-Fi Issue

Hi, I have a new MS650 soundbar, but I have been trying to connect to Wi-Fi for 3 days without success.

So, the only way to connect it. use Samsung Multiroom app but it just doesn’t work.

READ  How to Bypass Google Account on Samsung Phone

The app finds my panel, but tries to connect, which simply displays an error message “Ubable to connect your Speaker to the network”

I tried to use my android phone and I tried unsuccessfully to use Ipad, I also tried to connect via 2. 4 and 5 GHz network.

I rebooted the modem, fiddled with the wireless settings and nothing.

It seems to me that half of the soundbar‘s features are unusable and also won’t be able to receive firmware updates.

I tried to call Support but they didn’t help.

Here is the soundbar I got: http: // www.Samsung.com/us/televisions-home-theater/home-theater/sound-bars/soundpremium-soundbar-h.

How to connect the soundbar to your TV via 3.5mm line out?

With a 3.5mm line-out jack, you just need to make sure you’re using the one labeled “line-out” on your TV, not the headphone jack. because they look the same.If you plug the soundbar into your TV’s headphone jack, the sound is likely to be terrible, so it’s best to check first if your TV has a line-out port.

Once you’ve connected your line-out cable, just plug the other end into your soundbar and you’re good to go.

What is the Difference Between Digital Optical and Digital Coaxial Cable?

The optical cable has a square connector and the coaxial cable. round.Optical cables are slightly different in that they convert an electrical signal into optical light to send it down the cable and then convert it back to an electrical signal at the other end.

Some people prefer this to coaxial cable because in theory you will get less electrical interference. But in reality it is almost impossible to tell the difference. they are both capable of transmitting a high quality digital signal.

Before you go shopping for cables, it’s worth checking the back of your TV, most TVs have an optical jack, but not all TVs support digital coaxial cable.

Samsung soundbar how to connect

Why HDMI is needed?

Because they can carry large amounts of uncompressed digital audio data, the HDMI cable can handle any sound system from 5.1 to 7.1 surround sound and beyond.

They can also handle new cinematic experiences like DTS: X and Dolby Atmos, but you’ll need to make sure you’re plugging it into the correct port.

Most HDMI ports on TVs are for input only, meaning they cannot send anything from the TV, they can only receive data from what they are connected to.

4 ways to connect your soundbar to your TV

Enhancing the sound quality on your TV with a soundbar can be a game-changer for your ultimate entertainment experience. But with a large selection of different cables and connectors, it can be tricky to know which one to use to get the most out of your kit.

There are two approaches to connecting your soundbar to your TV:

  • Use your soundbar as a hub and run multiple devices through it, which means you only need one cable to your TV.
  • Set up the soundbar as a speaker and connect all other devices to the TV, then connect the TV to the soundbar.

These options depend on the soundbar itself and whether your TV is ARC-compatible. Let’s start with the option that provides the best sound quality.

Need help connecting Bluetooth headphones and soundbar at the same time

I need help. I have a Samsung TV, model QN75Q65FN, which I am trying to use with a Bose soundbar and Bose wireless headphones. The soundbar connects via the HDMI arc and works fine by itself, and the headphones, when selected in the sound settings (bluetooth), also work fine by themselves.

When I try to use both, I can’t get them to activate at the same time. If I use multi-out in the accessibility section as suggested in the previous post, the sound will come out of the TV speakers, but I cannot get it to come out of the soundbar Are there any suggestions on how to get both to work at the same time? Both can work independently of each other, but I need them to work at the same time. Does anyone have any help on how to get them to work in tandem?

Digital optical or digital coaxial

If your soundbar doesn’t have an HDMI jack, the next best option is. use a digital optical or digital coaxial cable capable of transmitting digital audio in up to 5.1 surround sound.

Wi-Fi Direct technology

Since the introduction of Smart TV functions into televisions and the installation of a wireless module, manufacturers have begun to work on technology that could allow content to be transmitted wirelessly, that is, via Wi-Fi. The first development was Wi-Fi Direct, which evolved over time into Miracast and the interchangeable WiDi technology. With it, you can effortlessly cast your phone screen to your TV display.

The first thing to do is find out if the TV has support for the option. All modern models with Wi-Fi have either WiDi or Miracast, that is, they can be synchronized with the phone. Older TVs may not have it. You can clarify by looking at the device specifications, or in the settings, the network section. there must be an on / off switch for the option.

If there is one or Smart TV is modern (the option is on all the time), then you need to lower the shutter down in your Samsung phone and find the “Screen Mirroring” icon. By tapping on it, a window with available TVs will open, it remains to pair and the screen of the device will immediately be displayed on TV. As a rule, there are no difficulties when connecting, but some devices may be prompted to enter a password, or you will need to confirm the synchronization using the remote control.

If the application icon is not on the quick access bar, then the application is probably not installed by default on the smartphone. You can download it from the Play Market or find an alternative for it. just enter the query “broadcast” in the application search bar.

Screen Mirroring is convenient because you do not need the Internet to work. the network is established between two devices.

DLNA network connection

If you want to connect your smartphone to TV as a storage device, that is, you do not need to broadcast the screen, but only need to run certain content, then you can create a local network using DLNA technology. In this case, both devices must be connected to the same Wi-Fi network. Next, you need to install on TV or phone the application through which the launch will be carried out. If you plan to watch videos or display photos, then a VLC player for your smartphone would be a good solution.

To fully exchange files or access them, you can use the DLNA Server utility. this is a kind of file manager for working in a local network via a mobile device.

Some TVs with DLNA local connection support already have a built-in media server in Smart TV functions. LG calls it Smart Share. having connected to one Wi-Fi connection, you need to launch the Smart functions of the TV panel and go to the tab of the same name. Now, through the LG webOS interface, you can manage files on your mobile phone. open photos and videos or copy to a drive connected to the TV.

Youtube

For those for whom the above methods are not suitable, since they just want to watch YouTube videos on a big TV, they will like the built-in function in the service client on their smartphone. After launching the application on your phone, open its settings and go to the “view on TV” menu item. In a standard situation, you will see a list of TVs on which you can display content. If this does not happen, then forcibly turn on YouTube on TV and go to the settings. Click “connect manually”. the code will be displayed, which should be entered in the “specify the code” window on your mobile phone.

Now the applications are synchronized, and you can now control them through your mobile gadget, which is much more convenient than entering requests with the remote control in the TV version.

Now we will connect a Samsung phone to the TV via Wi-Fi in order to broadcast the desired one. How, I’ll explain now

Good afternoon, dear readers of my blog! Anyone sometimes comes across the fact that, having come to visit friends, he wants to show them photos from the trip or a funny video shot on a smartphone. This can be done on the screen of the device, but even the largest diagonals can turn out to be small for a large company. In this case, a decision appears to display the picture on the TV, and then the thought of the need to look for wires, to adjust something. The idea seems difficult to implement, but nothing prevents you from using a wireless network. Today I will show you how to connect your Samsung phone to a TV via Wi-Fi.

If the TV is not Smart

If you are the owner of an old TV or it does not provide Internet access, then you still do not need to use wires to broadcast content. Having bought a Smart Box with Android, you can make a Smart out of your usual panel. Such consoles have a built-in Wi-Fi module with support for Mirakast and Wai Dai technologies. The setting in this case is no different. the set-top box is connected via HDMI, on the TV we turn on the signal source of the selected connector, and then everything is similar to the usual Smart TV.

Do not forget to share this information with your friends in social networks and messengers by clicking on the “button” at the bottom of the article.

Thanks for attention! And see you soon on the blog! Best regards, Rostislav Kuzmin.