How to connect to a Samsung TV via iPhone

HDMI to the rescue

The HDMI interface is also quite popular today, which is used when connecting various electronic devices to each other. Its advantage is that it can transmit a high-precision digital signal. That is, it is ideal if you decide to watch high-definition video.

However, connecting an iPhone to a TV in this way is slightly complicated by the fact that all Apple devices use their own proprietary Lightning connectors. But this problem is solved by purchasing a special adapter. Digital AV Adapter, Lightning to HDMI “MiraScreen”, etc., equipped with an HDMI interface.

How to organize a broadcast from iPhone to TV? You will need to do the following:

  • We insert the adapter into the iPhone.
  • Connect one end of the HDMI wire to the adapter.
  • We stick the other end of the cable into the TV. We use the HDMI connector, which is available on all modern TVs, and any manufacturer. Sony, Samsung, LG, Philips, etc.
  • In the TV settings, select the mode in which the image will be displayed from the corresponding port. In our case, this is HDMI. Just be careful. modern TVs have multiple HDMI ports. So specify the one to which you connected the device from Apple.
  • After these manipulations, the iPhone display will appear on your TV screen. But this is if you have a modern model of an “apple” smartphone. 5, 5s, 6, 7, etc. On the same 4s (and below), instead of the display, only shortcuts for launching video, audio and viewing the image gallery will be visible. However, this fact will not prevent you from watching your favorite movie or listening to a couple of music tracks.

connect, samsung, iphone

For reference! After connecting the devices via HDMI and turning them on, all the necessary settings should load automatically. But sometimes you have to do it manually. To do this, both on the iPhone and on the TV you need to set “HDMI” as the source of the main signal. Then, after successful synchronization, the picture from the smartphone will begin to duplicate on the big screen.

Connect iPhone to TV via USB

A USB cable is a universal solution if you need to synchronize two devices with each other. Including when it comes to connecting an iPhone to a TV. So you can safely use this interface. For this:

  • Turn off the TV.
  • Connect your iPhone to your TV using a micro USB cable (30-pin or Lightning. depending on model). Typically, the USB port is located on the back or side panel.
  • Turn on your TV. In the device settings, set the display of the picture from USB.

That’s all! It remains to wait for the synchronization process to complete.

For reference! By connecting the iPhone to the TV via USB, you will not be able to display the picture from the screen to the screen in order, so to speak, to duplicate content on a display with a larger diagonal. The system will only recognize the smartphone as a storage device. Therefore, this method is suitable for those cases when you need to broadcast videos and photos stored in your phone to TV.

We use the possibilities of WI-FI

Today, a huge number of TV models (Samsung, Sony Bravia, LG, Philips, etc.) connect to WI-FI without any problems. Naturally, such a wireless connection can be safely used in order to broadcast content from a smartphone.

over, this method of synchronization is one of the most convenient. After all, it allows you to do without wires. And no additional devices are required either.

How to connect a gadget to a TV via WI-FI? First you need:

  • Create a network or organize an existing one.
  • Make sure the TV has a Wi-Fi module and turn it on. This is done in different ways. Usually through the built-in application: for LG, this is the Smart Share software product, for Samsung, AllShare. On many TVs, you can establish a connection with a smartphone in the Applications section, activating Wi-Fi Direct Mode there.

Then you can start syncing your iPhone and TV:

  • First of all, we connect both devices to the existing WI-FI network.
  • We launch an application on the iPhone for displaying video and other content on TV. For example, Twonky Beam, Smart View (Samsung only) or iMediaShare. All of them are available for download in the App Store.
  • It is not difficult to use such software. You just need to specify the file that you want to broadcast on the TV screen, and then select the device itself. We will not dwell on this in more detail. We are sure you will figure it out along the way.

For reference! If for some reason you are unable to connect your iPhone to your TV wirelessly via WI-FI, then try using a Google Chromecast device. This small adapter the size of a USB stick needs to be plugged into an HDMI port. Then you can easily and quickly set up a wireless connection with various TV models.

How to connect an iPhone to a TV: instructions and recommendations

Is it possible to connect an iPhone to a TV? Of course. You ask, what is such a synchronization of a gadget with a TV device for? For example, to watch a movie or display photos on the big screen. Agree that this is very convenient? It remains only to find out how such a connection can be made and what is needed for this.

Let’s use Apple TV

By the way, there is another possibility to create a wireless connection between iPhone and TV. True, for this you have to use the Apple TV media player.

You will also need an HDMI cable. You also need an iPhone no older than the fourth generation. What are the requirements for a branded Apple TV? 2G, 3G or 4G. In this case, both gadgets must be updated to the latest version of iOS. Otherwise, errors may appear when connecting.

When all of the above is at your fingertips, then you can proceed:

  • Turn on Apple TV. We connect a TV to this device. This is done using Wi-Fi or Bluetooth.
  • Synchronizing iPhone with Apple TV. And do not forget, if WI-FI is used, then both TV and the “apple” gadget must work within the same network.
  • On the iPhone, press the Home button twice. Then we tap on “Volume control, brightness”.
  • Choosing AirPlay.
  • Further in the list of devices, we are looking for the option we need.
  • After you tap on the set-top box, the AirPlay Mirroring switch will appear. We activate it and wait for the iPhone desktop image to be broadcast on the TV screen.

Can I connect my iPhone to a TV using an analog cable?

You can also connect the iPhone to the TV with the popular “tulip”. Yes, this is the same composite cable from the distant 1990-2000s. As you remember in those days, this standard was widely used in audio and video equipment.

So today you can use it to connect your iPhone to a TV device. The only caveat is that you won’t be able to view high-definition videos.

At the same time, you can create an analog connection between the iPhone and the TV using several types of adapters at once. Which one to use. be guided by the model of your “apple” smartphone:

  • Apple Composite AV Cable. Has 3 standard cinch plugs and one USB. Suitable for 4s and older iPhones.
  • Apple Component AV Cable. Reminiscent of the first option. It differs in that it contains additional connectors for synchronizing the image and improving the quality of the transmitted picture. Also for iPhone 3G, 4 and 4s.
  • Apple Lightning VGA adapter. It is used to connect to a TV of the new generation models. iPhone 5, 5c, 5s, etc. It has a 15-pin analog connector for a VGA cable.
READ  Headphones don't turn off on iPhone

It doesn’t matter which option you use, the connection procedure itself is as simple as possible. It consists in the standard connection of wires and corresponding connectors on both devices. As for the TV, in its settings menu, it remains only to select the image output mode through the AV-input.

How to transfer an image via USB

It should be noted that you cannot duplicate the contents of the screen of a mobile device to the TV if you synchronize them via the USB interface. The Iphone will act as a storage medium. To connect your iPhone to your TV via USB, you need to use an appropriate cable. It is best to carry out the entire procedure sequentially:

  • Disable TV and iPhone;
  • Connect the cable to both devices;
  • Turn on the TV and then the mobile device.

How to display video on TV screen if devices are synchronized via USB interface? To do this, you will need to use the TV settings. First, go to connected devices and then select video mode. It is important to note that modern TVs are capable of reproducing almost any popular formats.

As you can see from the instructions, it is not difficult to connect an iPhone of any version to a TV via a USB cable. It should be noted that it is also better to disconnect the wire after disconnecting the devices.

Connection via additional devices

You can use additional devices to link your iPhone to your TV. Most often used:

  • Google Chromecast;
  • Apple TV.

Google Chromecast allows you to connect a TV and an iOS device. Externally, the device resembles a USB flash drive. Chromecast connects to a mobile device via a cable, and to a TV via an HDMI port. Thanks to Chromecast, you can watch movies, run games, and surf the Internet. No special knowledge of setting up the device is required.

Apple TV is a multimedia player. To configure the device, you must sequentially perform the following steps:

  • Turn on your TV and Apple TV receiver;
  • Switch TV to signal input;
  • The device interface will appear on the screen. It is recommended to recheck the settings;
  • Connect iPhone to your home network using a wireless connection.

After that, all devices will be synced. It remains only to transfer any video files or graphic images to the TV.

How to connect iPhone to TV

A device like the iPhone is becoming more popular every year. That is why the developers are doing everything to ensure that the device meets the expectations of buyers. Mobile device owners sometimes wonder how to connect an iPhone to a TV. In fact, there are several ways to connect:

  • Using wireless communication;
  • Via HDMI cable;
  • Through an analog cable;
  • With the help of additional devices;
  • Via USB cable.

It should be noted that each method is unique and has its own capabilities. Connecting with some cables only allows you to transfer photos. Other methods allow you to watch movies and run games.

If your TV supports wireless, you need to set it up. To do this, just go to the settings, and then turn on Wi-Fi. As soon as it is possible to organize the connection of the TV with a local network, you can proceed to the next step.

Users need to connect iPhone to the same local network. To do this, you need to select the appropriate connection in the settings. Costs Honor that a password may be required.

In the next step, you need to launch an application such as Twonky Beam on your smartphone. The program can be downloaded from the Apple Store. When the application is installed and launched, you need to check the box next to the “Show or hide the visual”.

When the iPhone setup is complete, you need to select the video you want to transfer to the TV screen. Now it remains only in the additional menu to select the TV to which the connection will be made. After the inscription “Beaming” appears, the video will be broadcast.

How can I connect an iPhone to an LED TV

Mobile developers are constantly working on their products. The same goes for the iPhone. Modern models have excellent screen resolutions. In this regard, users get the opportunity to view not only photos, but also movies in high quality. Despite the functionality of the iPhone, sometimes there is a need to connect a mobile device to a TV.

Broadcast via analog cable

You can display the image from the iPhone on the TV screen using an analog cable. Such a wire is popularly known as the “Tulip”. The disadvantage of this connection method is that it is impossible to transmit high-definition video through an analog cable.

You can connect to TV using one of the following wires:

  • Composite;
  • Component;
  • VGA cable.

So how do you connect your iPhone to your TV via composite wire? It’s simple, the “bells” are inserted into the TV, and the remaining end of the wire into the mobile device. With such a connection, the TV does not need to be set up, it is enough to turn on AV, and you need to turn on “Mirroring” in the phone. The function can be found in the settings.

With iPhone version 4 and above, the picture can be transferred to the TV using a component cable. The connection principle does not differ from the composite one. One end is inserted into a mobile device and the other into a TV.

The VGA cable is more complicated. To connect such a wire to a mobile device, you need to purchase an Apple Lightning VGA Adapter. Honor should be able to connect iPhones version 5 and higher in this way.

HDMI connection

Is it possible to display an image on a TV using an HDMI cable? In fact, it is possible to make such a connection, but there are some difficulties. The problem is that any Apple device has a proprietary Lightning connector.

To solve this problem, you need to additionally purchase an Apple Digital AV Adapter. This adapter has an HDMI connector. When you have all the components in your hands, you can connect them to the phone and TV.

First you need to turn off your iPhone, as well as your TV. Now you can connect the wire. One end plugs into the TV (the connector is located on the side or back). The other end connects to the adapter, which in turn needs to be connected to Lightning.

When the wire is connected to both devices, you can turn on the TV and iPhone. In most cases, devices are detected and configured automatically. After finding the TV, the Mirroring option is activated. Thanks to this function, the image is transmitted to the TV screen.

Sometimes there are cases when the connection cannot be configured in automatic mode. If this happens, you need to do everything manually:

  • The iPhone needs to enable data transfer via HDMI. The parameter is enabled in the settings;
  • On the TV, you need to turn on the signal source. HDMI;
  • Wait 10-15 seconds.

After that, the image will be transferred to the TV screen. It should be noted that this type of connection allows you to transfer not only the image, but also the sound to the TV display.

How to connect iPhone to TV via Wi-Fi?

  • Leave the TV on the screen showing the WPA key (password) to be entered into the iPhone.
  • Select Wi-Fi in iPhone Settings to enable Wi-Fi function.
  • On the iPhone screen, tap Direct-xx-BRAVIA to access the password entry screen.

How to Display iPhone Screen on LG TV?

  • Install the free LG Smart Share app on your TV.
  • Install the Twonky Beam app on your iOS device.
  • Check in the application the item “show or hide the visual indicators at the edge of the screen”.
  • Select the video file you want to output from your smartphone to the big screen of your LG TV.

How to Stream Videos from iPhone to Samsung TV?

How to connect iPhone to Samsung TV

  • Connect your Samsung TV to Wi-Fi.
  • Press the “Source” button on the TV remote control.
  • Select “Mirroring”, “Screen mirroring” or similar item from the list.
  • Open the switch shade (Control Center) on iPhone.
  • Select the Screen Repeat option.
READ  iPhone 11 Internet does not work

How to AirPlay iPhone to Samsung TV?

Screen Mirroring iPhone, iPad, or iPod touch

  • Connect your iOS device to the same Wi-Fi network as your Apple TV or AirPlay 2 compatible Smart TV.
  • Open Control Center:…
  • Click Screen Repeat.
  • Select your Apple TV or AirPlay 2 compatible Smart TV from the list.

How to connect to a Samsung TV?

If you are using a Samsung Galaxy smartphone or tablet, swipe down from the top of the screen and turn on Smart View or Screen Mirroring from the menu. After that, a connection will be established between the mobile phone and the TV.

How to find the code from your TV?

  • Open the YouTube app on your TV.
  • Click on the settings icon.
  • Scroll down the page and select Connect manually. A blue code will appear on the screen.
  • Enter the code on your smartphone, tablet or computer.

How to connect phone to TV on iPhone?

This will require the appropriate cable or adapter.

  • Insert the Lightning Digital AV Adapter or Lightning to VGA Adapter into the charging port on the bottom of iPhone.
  • Insert HDMI or VGA cable into adapter.
  • Connect the other end of the HDMI or VGA cable to an external display (TV, monitor, or projector).

How to Stream Videos from iPhone to Samsung TV?

How to connect iPhone to Samsung TV

  • Connect your Samsung TV to Wi-Fi.
  • Press the “Source” button on the TV remote control.
  • Select “Mirroring”, “Screen mirroring” or similar item from the list.
  • Open the switch shade (Control Center) on iPhone.
  • Select the Screen Repeat option.

How to connect iPhone 6 to TV?

The connection diagram is very simple: insert one end of the HDMI / VGA cable into the TV and the other into the Apple Device Adapter, then plug the iPhone into the adapter. You can also connect a charger to the second Lightning connector so that the battery does not run out during operation.

How to connect to Wi-Fi on TV?

  • In the smartphone settings, start the Wi-Fi hotspot. Depending on the manufacturer, Android version, etc.
  • Further, in the TV settings, in the “Network” section, you need to connect the TV to the Wi-Fi network that your phone distributes.
  • The TV connects to Wi-Fi and you can launch applications from the Smart TV menu.

Can I connect to a TV through an iPhone?

Today, the only normal way to display an iPhone on the big screen wirelessly is with the Apple TV. It connects to a TV, monitor or projector via HDMI and can receive images from an iOS device via AirPlay.

How to AirPlay iPhone to Samsung TV?

Cast video from your iPhone, iPad, or iPod touch

  • Connect your device to the same Wi-Fi network as your Apple TV or AirPlay 2 compatible Smart TV.
  • Find the video you want to stream.
  • Click.
  • Select an Apple TV or an AirPlay 2 compatible Smart TV.

Which Samsung TVs support AirPlay?

List of TVs compatible with AirPlay 2

Samsung FHD / HD 4, 5 Series (2018); Samsung QLED 4K Q6, Q7, Q8, Q9 Series (2018 and 2019); Samsung QLED 8K Q9 Series (2019); Samsung The Frame Series (2018 and 2019);

Features of connection and settings

Depending on the TV model, the process of connecting a smartphone and subsequent setup may differ.

How to connect your phone to your Smart TV

There are several ways to connect your phone to your Smart TV. Each method has its own advantages and disadvantages that determine its use.

The USB connection does not directly transfer the image to the screen. In this case, we are talking about using a smartphone as an external storage device. Opportunities for the transfer and playback of specific files will open, but it will not be possible to use mobile applications.

Almost all smartphones connect as follows:

  • using a standard USB cable, the jack in the phone is connected to the corresponding jack on the TV;
  • USB input is selected on the TV in the list of signal sources.

If your TV has multiple USB ports, you may need to specify the corresponding number.

After connecting from the TV, you can open the directories of the smartphone and play or move any files from there.

This connection method assumes that the TV has a Wi-Fi adapter. Not all models are equipped with this component, so it’s better to find out in advance. Wi-Fi connection additionally requires a smartphone with Android operating system at least version 4.

The process boils down to a few simple steps:

  • in the settings section on the smartphone, you need to select the “Wi-Fi Direct” item and enable this function;
  • the device will automatically start searching for available networks and display them on the screen;
  • at this time on the TV, you also need to turn on the “Wi-Fi Direct” function, which is most often located in the “Network” settings section;
  • a list of devices available for connection will appear on the screen, among which you need to find a smartphone and connect to it.

When connected, the TV will send a request to the phone to confirm the operation, after which the signal from the smartphone will be broadcast on the screen along with sound.

DLNA is a set of digital standards that open up vast possibilities for creating a home network. Any devices that support this standard can be combined. At the same time, any media files can be easily transmitted in high quality.

Making a connection may seem a little more complicated than using other methods:

  • you will need to provide a common Wi-Fi network and connect all devices to it;
  • a special application is installed on the smartphone to create a server for the exchange of information (for Android systems, this is the BubbleUPnP program).

This technology allows you to transfer audio, video and photos to your TV. However, there may be problems with the direct transmission of the image to the screen, since such an opportunity is not provided here.

Lightning for iPhone

You can connect iPhone to Smart TV using the included Lightning cable, which has a USB output for TV.

  • TV and smartphone are connected via cable;
  • in the settings you need to specify the smartphone as a signal source.

The process is very similar to a standard USB cable connection. And the result is the same. The phone does not broadcast an image to a large screen, but will function like a regular flash drive.

A dedicated HDMI cable is better for transferring images directly from iPhone to TV.

MHL systems have been specifically designed to combine HDMI and micro-USB functionality. This approach made it possible to transfer not only the image, but also high-quality sound from mobile devices to the TV. With this connection, the smartphone is also charged.

It is the simultaneous transmission of video and sound that distinguishes MHL from traditional HDMI interfaces. However, there are also disadvantages, the main of which can be considered the impossibility of simultaneously connecting an external drive to the gadget.

Connecting via MHL is not much different from a regular USB connection. Here it is enough just to connect the wire and select the device as the main signal source.


Modern digital devices support a convenient wireless data transmission technology called Miracast. The method must be supported by both devices, as well as the use of one common Wi-Fi network.

The technology allows you to comfortably broadcast the image to the screen, play games and watch videos. There are practically no restrictions on viewing.

  • in the TV settings in the “Network” section, the Miracast function is activated;
  • this type of connection is also launched on the smartphone;
  • to start the broadcast, you just need to lower the upper curtain on the smartphone.

It should be noted that not all Android versions are suitable for this type of connection. Sometimes you may not find a similar option in the settings. The solution in some cases may be the installation of additional software.

To Samsung TV

The vast majority of Samsung TVs already have a built-in Wi-fi tuner, with which connecting the device to the internal network will not be a problem. In this case, it is enough just to turn on the SmartHub mode, which is responsible for a more convenient location of the control buttons.

Once connected, you can use one of the most common wireless methods: Miracast or Wi-fi Direct. Samsung devices support both technologies.

For owners of smartphones from Samsung, it becomes possible to connect a phone to a Samsung Smart TV using the Screen Mirroring function. You need to enable it in the smartphone settings, and then select your TV from the drop-down list. And now the image from the phone is broadcast to the big screen.

READ  How to view history on iPhone 7

How to Connect Your Phone to a Smart TV: The 8 Best Ways

Owners of TVs with Smart TV support are thinking about the possibility of connecting a smartphone to it. After all, it is so convenient sometimes to display the image directly from the phone without having to look for something separately on TV. And the transfer of data in this case will be greatly simplified. There are many ways to combine two devices.


TVs from LG provide for connection to a smartphone via a USB cable or Wi-fi Direct. But if the brands of the TV and the smartphone match, the Smart Share function will be available to directly transfer the image to the screen. Connecting your phone to your LG Smart TV via WI-FI won’t be a problem.

The latest Smart TV models run on the webOS operating system. The capabilities of this firmware are enough for comfortable broadcasting of images from the phone. Separately, it is worth highlighting the ability to play audio through the TV even when the screen is off.


With the Chromecast set-top box, you can easily connect your smartphone and TV via wireless interfaces. In this case, there are no special requirements for the TV, since the main work will be done by the Chromecast itself.

The set-top box is connected to the TV via an HDMI cable and becomes its “brain”. The set-top box has a built-in Wi-Fi adapter, which can be comfortably used to synchronize digital devices.

  • the Google Chromecast set-top box connects to the TV;
  • connected to a Wi-Fi network;
  • the Google Home program is installed on the mobile device;
  • an account is created and the software is pre-configured.

Now when you press the broadcast key, the entire image from the smartphone screen will be transferred to the TV screen.

How to Mirror iPhone to Samsung Smart TV

Using other connectors

How to connect an iPhone to a TV if the latter does not have an HDMI jack? In such a situation, you can use the composite input, but since a direct connection is not possible, you will need the same Digital AV Adapter. over, through the adapter it is possible to synchronize equipment even using a VGA cable, but the sound will need to be output separately.

In general, it can be easily connected using a variety of wires and special adapters. Apple’s “USB AV” composite cable is suitable for 3G / 3GS / 4 series phones and plugs into the RCA jack. All plugs are color coded to eliminate confusion during the connection process.

IPhone 4 / 4S requires purchase of Apple’s Component AV HDTV AV Cable. 5th generation devices are connected via VGA Lightning adapter.

How to connect iphone to TV using AV cable:

  • disable the connected equipment;
  • connect each plug to its corresponding output;
  • when connecting via a vga cable, output the audio separately with a cable for acoustics or through a lightning connector;
  • 5 or 4s series phones duplicate content on the display, but 3g or 4 display programs;
  • USB connector is used to charge iPhone during playback.

Proprietary AirPlay streaming video technology

Smart TV manufacturers take into account the desire of mobile device owners to watch streaming video. Models from brands such as Samsung and Philips are equipped with AirPlay support directly from the factory via built-in software: MirrorCast and AirScreen, respectively. This approach determines the stable operation of the communication channel and the optimal stream transmission speed. To use AirPlay technology on Smart-TVs of other brands, you need to look for suitable third-party software

Important! To connect iPhone to TV “over the air”, it is necessary that the devices work in the same Wi-Fi network.

How to Connect iPhone to Samsung Smart TV (Wireless)

  • Launch the desired application on the TV. If the program provides a synchronization option, activate the mode.
  • On the iPhone, enter the Home application, and wait for the gadget to detect TV as an external display.
  • Register the found device in the app.

The AirPlay pairing protocol provides the following:

  • high quality streaming video transmission;
  • duplicating iPhone images on the TV screen;
  • desktop extension.

HDMI connection

It is also possible to connect an “apple” gadget to the panel through a multi-component high-definition interface: in modern TV models there is at least one such connector. HDMI. To connect the plug to your smartphone, you need a special adapter from Apple.

For 4 series phones, this is a Digital AV Adapter, and for 5, 5s / c devices, a digital AV-Adapter Lightning.

Further, the synchronization process is quite simple: devices are turned off, cables are connected to the TV panel and to the phone via the Lightning connector. If the phone does not have a micro-HDMI jack, it is permissible to use a micro-USB-HDMI signal converter. After turning on the devices, the necessary settings occur automatically, but in case of an error, this will have to be done manually. To do this, activate “HDMI” as a signal source on each device. If the synchronization is successful, the picture from the smartphone will be displayed on the TV screen.

Features of pairing iPhone with TVs of various brands

Companies use a variety of technologies to communicate wirelessly with other devices in their TVs. Some manufacturers can provide their models with proprietary software solutions, like the aforementioned Samsung and Philips for using AirPlay. LG TVs come with Smart Share app for DLNA networks.

Smart Share App for LG TVs

Other brands may not offer proprietary software. For Smart TV, the iPhone owner will have to select the right third-party product.

Advice! For smart TVs running Android OS, you can try BubblePnP utility with DNLA pairing support.

Conventional TVs supporting DNLA standard can be connected to iPhone via AppleTV set-top box.

Connection via AppleTV set-top box

The branded Smart-set-top box AppleTV will allow you to connect your iPhone wirelessly to a regular TV. The device takes on the role of an intermediary, as it is equipped with support for the proprietary data exchange protocol “over the air” AirPlay. In such a wireless pairing, the set-top box receives video streams from the iPhone, and it redirects the broadcast to the TV connected to it via the cable interface.

For the first pairing of an iPhone with a TV in tandem with an AppleTV, the following manipulations are required.

  • The AppleTV set-top box must be physically connected to the TV with the appropriate interface.
  • The iPhone must have the STB management utility installed.
  • To set up pairing, the application starts the “Screen Repeat” mode.
  • The smartphone starts looking for a set-top box working in the home Wi-Fi network.
  • When the device is found, you should click on the name and in the opened connection confirmation window enter the code displayed on the TV-screen.

Important! In further communication sessions, device synchronization will be established automatically.

Four Ways to Connect IPhone to TV

Smartphones are no longer a luxury, but an essential attribute for both students and employees of various companies. New generation phones have excellent technical characteristics: large memory capacity, wide multimedia capabilities, high screen resolution. One of the notable features is the synchronization of gadgets with TVs, which allows you to display various files on a wide screen, for example, videos from the Iphone. Let’s consider the main ways of connecting an “apple” smartphone. iPhone. to a TV.

Using the DNLA protocol

After installation, the user needs to start the streaming mode in the application and send a test video. When launched, the program will start looking for compatible devices. If the “Network” mode is activated on the TV in the corresponding DNLA-client, then the devices will see each other, and the TV-screen will start playing the video sent from the iPhone.

In the established connection, reverse data exchange is also possible. Through the application on the TV, the user can access the information stored in the memory of the mobile phone, access to which is appropriately configured in the AllCast program on the iPhone.

WI-FI capabilities

The WI-FI module built into the Smart TV will allow you to connect without using wires and additional devices. This is by far the most convenient method of syncing and transferring information from one device to another.