How to connect wireless headphones to a Sony TV

Connecting Wireless Headphones to Samsung TVs

Samsung Smart TVs are extremely popular. This is not surprising, because the products from the South Korean brand have proven themselves from the best side. Therefore, many users prefer this particular technique. However, not everyone succeeds in connecting headphones to a Samsung TV.

Most of the difficulties in the synchronization process arise from compatibility issues. Therefore, it is desirable that the headphones are also from Samsung. However, the latest TV models from the South Korean brand support connecting devices from other manufacturers. In theory, compatibility shouldn’t be a big deal.

connect, wireless, headphones, sony

How to make sure that the sound is reproduced not through the built-in TV speakers, but through the headphones? Much depends on the model, TV line, and Smart TV firmware. Open your TV settings. Go to the “Sound” section, and then “Speaker Settings”. Turn on Bluetooth headphones. They should be located as close to the TV as possible. The blue light will start blinking to indicate that the device is entering pairing mode. Select the “Bluetooth Headphone List” tab.

What if “Bluetooth headphone list” is grayed out and cannot be selected? In this case, you should go to the service menu, and there activate this option.

The menu interface may vary according to your TV model. However, in general, the connection algorithm is the same. A list of devices available for connection will appear on the screen. Select the model of your headphones from the list provided. The sound will be broadcast through the headset.

To connect wireless headphones to a Samsung K series TV, you need to act a little differently. Go to TV settings, and then select the “Sound” section. In the menu that appears, select the “Select Speaker” tab, and then the “Audio Bluetooth” item.

Instructions for connecting Bluetooth headphones to the TV

Not all modern TV models are equipped with high-quality speakers. Therefore, the clarity and naturalness of the sound may leave the best. Mostly this kind of problem is solved by connecting acoustics. However, this option is not suitable for all users. Now we will look at how to connect wireless headphones to your TV to enjoy high quality and clear sound. Synchronization of these devices will provide maximum immersion in the movie, game, and also ideal for listening to your favorite music.

What you need to connect

Wireless headphones for TV are connected via Bluetooth. Therefore, to set up synchronization, it is enough to set the appropriate parameters in the TV settings. No additional devices are required. It is much more difficult to pair headphones with a TV if it does not support Bluetooth or Wi-Fi. In this case, the list of required equipment will look like this:

  • TV;
  • Bluetooth transmitter;
  • wireless headphones.

The specifics of connecting television headphones directly depends on the device of which company you are using. For example, LG TVs have a dedicated sync app. The customization features are also determined by the Smart TV operating system. We will carefully analyze how headphones are connected to TVs from various companies so that users do not have absolutely any problems.

Connecting Wireless Headphones to LG TVs

LG TVs operate on the webOS operating system. Therefore, the process of connecting headphones via Bluetooth will be significantly different. The synchronization process is quite complex. Especially if we draw parallels with TV from other manufacturers. There is very little information on this topic on the Internet.

To begin with, you can only connect an LG headset. This means that TVs from this South Korean brand only work with branded devices. Take your remote and then go to settings. Select “Sound” and then “LG Sound Sync (Wireless)”.

Please note that even if the TV supports Bluetooth technology, then it is primarily aimed at connecting the Magic Remote, as well as other branded devices. It is possible that you will need a Bluetooth headphone adapter.

There is also an alternative connection scheme for the headset:

  • Open the Bluetooth settings menu.
  • Select “Bluetooth headset”.
  • Click “OK”.
  • Hold down the green button to start the search.
  • Select your headphones and click “OK”.
  • Enter the PIN code, it is indicated in the instructions.

This instruction is published on the official website of LG. According to this scheme, branded devices are connected.

Some users prefer to set up their connection through the TV Plus program. You can download this utility from branded markets. Google Play and Apple Store. These apps have been specially designed to control LG TVs. They operate under the webOS operating system. Setting up a connection through a proprietary application is possible on models with webOS 3.0 and higher firmware installed.

Everything is done in an elementary way. First, download the LG TV Plus app to your smartphone or tablet. We go into the program and set up synchronization with the TV. There is a special section in the application settings. “Bluetooth Agent”. Headphones are connected through this agent.

Connecting wireless headphones to an Android TV

The Android operating system is mainly used by Philips and Sony TVs. These manufacturers did not make any restrictions on connecting Bluetooth devices. Therefore, the sync instruction will be identical. There is nothing complicated about it. The main thing is to set the appropriate parameters in the menu.

Connecting wireless headphones begins with the fact that the user enters the main Android TV menu, and then selects the “Wired and wireless networks” section at the bottom. Activate Bluetooth wireless technology, and then select Search for Bluetooth device. A notification will appear on the TV screen that it is necessary to activate this wireless technology on the device. Important! Headphones must be within 5 meters of TV.

Turn on the headphones, and then click on the “Search” button. Connection mode is automatically activated. This will be indicated by a flickering blue indicator. What if it doesn’t blink? Press and hold the power button or the key on which the corresponding icon is drawn.

A list of devices available for connection appears on the TV screen. Select the name of your headphones, and then click on the “Connect” button. The device is connected, but now you need to set its type. Select “Headphones”. A new notification will appear “Connected to Headphone Model Name”.

Now the sound from the TV is played through the headphones. Sound parameters are controlled through the TV settings. Go to the section “Removing a device”. Here you will find the necessary commands to turn off the wireless headset and operate the TV in standard mode.

Now you know how to connect Bluetooth headphones to Sony, Philips TVs, as well as devices from other companies running on Android TV. Synchronization setup process takes no more than 2-3 minutes. Practice shows that users do not have any difficulties. It is enough to adhere to the instructions.

Connecting to other brands of TVs

Not every TV can connect headphones. Some devices do not support this wireless technology. However, the problem can be easily solved by purchasing a special transmitter. What are the criteria for choosing this device? The main parameter is the number of simultaneously connected devices.

Any transmitter is capable of connecting Bluetooth headphones to a TV. Simultaneously, two headsets can be connected to premium devices. Modern adapters are unable to connect more than two headphones.

To listen to music via Bluetooth headphones, buy the Mpow Streambot adapter. The cost of this device is 30. For one headset, high-quality sound is guaranteed. The basic configuration of the device includes a rechargeable battery. The adapter allows connection of various devices. Even without preliminary setup, you can listen to the sound that is transmitted to the wireless speakers.

To connect two headphones at once, you will have to purchase a more expensive device. For example, Avantree Priva. This device costs about 60. Miccus Mini Jack would be a good solution. These transmitters allow you to connect your headset to your TV without any hassle. So that users absolutely do not have any difficulties, we have developed a step-by-step algorithm:

  • Connect the previously purchased transmitter to the network. The specifics of the connection will depend on whether it has a separate power supply.
  • Plug the transmitter into the TV’s RCA (cinch) jack. If your model is not equipped with this interface, then you must first purchase a special adapter.
  • Mostly the transmitters are started automatically, immediately after they have been connected to the network. Some models need to be activated manually by pressing a special button. If the corresponding indicator is on, it means that the device is connected.
  • Synchronization between the transmitter and the headphones is automatically established. This is because both devices operate at the same frequency.
READ  The printer does not write enough toner what to do

What if the sound is still coming through the TV speakers or the headphones cannot be seen? Reset the settings. After restarting, the adapter will automatically connect to the headset.

Absolutely all users are interested in the question of how the sound is regulated, as well as in what radius do you need to be from the TV? This aspect directly depends on the adapter model. Mainly, the power source should be within a radius of 10 meters. If you go beyond this limit, then the signal quality will noticeably decrease. It is possible that synchronization will be broken.

1.1 How to Connect Airpods to TV?

You can connect Airpods to the TV exactly as described in the basic instructions above. The main thing is not to forget to turn on the pairing mode so that the headphones do not connect to the phone, but can be detected on the TV.

How to connect wireless headphones to your TV?

You can connect wireless headphones to your TV in the same way as to any Bluetooth-enabled device, such as a phone. Of course, if the TV has a corresponding module. But, even if it is not there, connecting Bluetooth headphones to a TV is possible: through external adapters, TV set-top boxes and more. All this is in this article.

If you are interested in how to connect radio headphones to the phone, then, more often than not, everything is much simpler. We connect the base to the TV (optics or audio cable), and the radio connection will already be with the base. Everything is included. Such models, for example, are considered in our special rating.

How to connect wireless Bluetooth headphones to your TV

You can connect wireless headphones to a TV in much the same way as to a phone. If, of course, the TV has Bluetooth connectivity:

  • We turn on wireless headphones and the search mode for devices on them. Usually, to do this, from the off state, you need to hold the power button for 5-15 seconds until a beep sounds. details. in our manual or in the documentation for the headphones.
  • We go to the TV settings and search for Bluetooth devices. This can usually be done in the sound settings, there should be options for sound devices: audio-out, device speakers, loudspeakers, and the like. Among them should be Bluetooth.
  • In the submenu “List of Bluetooth devices” (may have a similar name) select your headset model.
  • We make pairing (connection). Done! Headphones connected.

With different TV models, the setting is different, but the principle is the same.

Connect wireless headphones to TV without Bluetooth

Wireless headphones can be connected to a TV without a Bluetooth module. But this requires additional devices: Bluetooth transmitters or set-top boxes. Consider 7 options.

The Bluetooth transmitter can have different connectors for connection:

  • mini-jack 3.5mm (Mini-Jack);
  • AUDIO RCA (tulip);
  • Optical Digital Audio;
  • USB.

USB transmitters will fit a TV, from which USB inputs can recognize such devices (transmit sound). Accordingly, we connect the transmitter and pair it according to the instructions above. In addition, most likely, you will need to use the instructions for the transmitter.

In case of problems with the sound in the headphones after connecting, first make sure that it is the transmitter that is to blame. To do this, test it on any other device. PC or laptop. If the sound works fine on other devices, then it’s all about the settings of your TV. Sometimes in TVs, to output sound to external devices, you must manually enable this option in the settings menu.

Some TV boxes like Roku, Apple TV, and Android TV Box support wireless headphone connectivity. Accordingly, we connect and configure the set-top box, and already wireless headphones to it. The same is true for TV receivers and home theaters.

Some Android TV devices support Bluetooth audio connectivity. In this case, the connection is quite simple:

  • Put the headphones into pairing mode.
  • Go to the menu “Settings” → “Bluetooth”
  • Select your headphone model from the list.

Apple TV has the ability to connect wireless headphones. The logic is the same:

  • Put the headphones into pairing mode.
  • Go to Settings “→” Remotes and devices “→” Audio and video “.
  • Select your headphone model from the list.

Connecting headphones with Amazon Fire TV and Fire TV Stick is another option for connecting Bluetooth headphones to your TV.

  • Put the headphones into pairing mode.
  • Then on Fire TV or Fire TV Stick go to Settings → Bluetooth Controllers and Devices → Other Bluetooth Devices.
  • Select your headphone model from the list.

In order to watch TV with wireless headphones using a Roku TV box, you need to:

  • Download and install the Roku app on your smartphone.
  • Connect wireless headphones to your smartphone (to do this, also make sure that your smartphone is connected to the same wireless network as your set-top box).
  • Enjoy private viewing of your favorite shows.
  • If you want to disconnect your wireless headphones from your TV, just turn off your headphones or disconnect them from your phone.

Also, some Roku models have a headphone jack built into the remote so you can watch TV with regular wired headphones without plugging them directly into your TV.

Game consoles also offer the ability to watch TV with wireless audio, but often they do not have the ability to connect a wireless headset, so you will have to watch TV with wired headphones connected to the set-top box.

The Playstation 4, alas, does not support all Bluetooth headsets. However, you can use a Bluetooth USB adapter to bypass the limitation, which, however, also does not work with all wireless headphones.

Therefore, the easiest option would be to use wired headphones on the controller. For this:

  • Connect headphones to the set-top box.
  • Go to the menu “Settings” → “Devices” → “Audio devices” → “Output to headphones”
  • Choose your headphone model.
  • Enjoy watching your TV.

What you need to know about connecting Bluetooth headphones to your TV

We may need to connect a wireless device to TV in two main cases:

Reason: Explanation:
We do not want to disturb the people around us with a loud sound. In this case, the use of wireless Bluetooth headphones is most justified and will definitely be encouraged by others.
Due to the sound of the headphones, on the contrary, we want to abstract from the people around us and extraneous noises. This will help you to focus 100% on the sound and picture from the TV.

It’s also important to make sure your TV has a built-in Bluetooth module. You can get the relevant information in the technical passport of the device, or by going to the TV manufacturer’s website and reviewing the information about your device.

How to Connect Wireless Headphones to LG TV

As we mentioned above, you can simply connect bluetooth headphones and an LG TV only if these headphones are also made by LG.

The very procedure for connecting to TV in this case is as follows:

  • Click on “Menu”;
  • Select “Sound”;
  • Next, find “Audio Out”;

You can also use the following scheme:

  • Go to the menu, and select “Bluetooth” there;
  • Next, select “Bluetooth headset”, then click on “OK”;
  • To search for devices, press the green key;
  • From the found typefaces select yours, then click on “OK”;
  • If necessary, enter the PIN-code, taking the number from the instructions for the headphones.

The above two methods do not work well with Bluetooth headphones from other manufacturers. In this case, the LG TV Plus application can help us. You need to install this application on your smartphone and connect it to your LG TV. In the settings of this application, run the “Bluetooth Agent” section, and through this agent connect the headset to the LG TV.

If the agent is not visible in the application, look for an earlier version of this application on the network and install it on your gadget.

How to connect Bluetooth headphones to your TV

Most TVs with a “Smart” set-top box support connecting devices using Bluetooth technology. And we can easily implement such a Connect on our own. Below we will analyze the options for connecting your Bluetooth headphones to a modern TV set from a number of popular brands (Samsung, LG, Sony). And also consider the characteristic features of such conjugations.

Way to Pair Bluetooth Device with Samsung TV

We will start our review by describing how to connect Bluetooth headphones to Samsung.

To do this, you need to do the following:

  • Open your phone settings;
  • Select the “Sound” section;
  • In this section, click on the “Speaker Setting” option;

To return to listening to sound through the TV speakers, simply turn off the headphones. At the same time, a pop-up message will appear on the screen asking if you want to play sound through this device. Select “Yes” to play the sound again through the bluetooth device.

If you want to turn off the automatic detection of headphones by the TV, select your headset model in the speaker setup menu and then “Delete”. ” Yes “.

Sony TV manual

The schematic diagram of connecting wireless headphones to a Sony TV via a Bluetooth connection boils down to something like the following:

  • Go to your TV menu;
  • Select there “Wired and wireless networks”;


  • The above procedure is provided as an example. For details, refer to the operating instructions supplied with the Android smartphone.
  • To erase all pairing information, see “Initializing the headset to restore factory settings”.

Before connecting wireless headphones to a smartphone, you need to follow the general recommendations

The first thing to do is plug in and turn on your headset. Some models are equipped with a charge indicator, but often it is missing. Therefore, do not forget to charge the device in a timely manner.

  • Turn on the module on the phone that is required for pairing with a headset (Bluetooth or NFC);
  • In the headphones themselves, you will need to enable pairing mode. It turns on in different ways in different devices, but usually it requires a long press of the power key;
  • To connect both wireless earbuds to the phone, you need to place them at a distance of no more than 10 meters from it.
READ  The printer is ready to print but does not print

What to do if only one earphone is connected

  • Try resetting your Airpods. To do this, in Settings, find the Bluetooth parameter, in the list of available devices, click on the letter i next to the name of the headphones and select “Forget this device”. After that, first put the headphones in the closed case for a minute. Then first open the case, wait for the white indicator to appear, place the device with the lid open next to the smartphone and press the connect button on the iPhone screen.
  • The problem may be with the old firmware. Try updating to the latest version. You can check which one you have in Settings. To do this, you need to sequentially select: Basic. About this device. Name of the headphones.
  • Check the volume balance on the device in the audio settings. Perhaps the slider has moved to the left or right, and the sound simply does not go to one of the headphones.
  • If devices are connected but there is no sound, clean the headphones. For this, it is better to use microfiber and cotton swabs.
  • Try connecting the headphones to another iPhone and if the problem persists, contact a service center. The battery may be out of order in the headphones, or the internal wire may be damaged.
    Only one earphone of any brand is connected.
  • Try to re-establish the connection by first removing the device.
  • Clean your headphones.
  • Try to connect them to another gadget to understand which device is the problem.
  • If the problem is with the phone, update the firmware or do a factory reset.

Which Sony headphones are suitable for your phone

Any wireless headphones, including those from Sony, can be connected to a Bluetooth-enabled phone. It is this technology that ensures the transmission of sound from the source to the speakers. Good options for Sony wireless headphones are:

  • Sony SBH80. These are compact and stylish earbuds with excellent sound reproduction. They are convenient to use both for standard listening to music and for talking and playing sports. They perfectly transmit the entire spectrum of frequencies, emphasizing low, and work for a long time without recharging.
  • Sony H Ear On Wireless MDR-100ABN. These over-sized headphones have incredible noise cancellation, eliminating nearly 100% of external sounds. They are comfortable to wear on the head, a capacious battery provides up to 20 hours of use, and they can also be connected via a wire when discharged.
  • Sony NWZ-W273. This headset is specially designed for sports and water treatment. They do not allow water to pass through, sit securely in the ears, have a comfortable design that does not interfere with active activities.

These Sony headphones fit your phone well due to their high quality.

How to connect via Bluetooth

Connecting to a smartphone is quite simple. This requires:

  • Turn on Bluetooth on both devices. On the phone, this can be done in the top menu or settings. The headphones activate the pairing function when you hold down the power button. Hold it until you see a blinking light indicating the transition to this mode.
  • Go to the search for Bluetooth devices on your phone. Before enabling this function on your phone, make sure the headphones are in the correct mode. After that, find the corresponding headphone name in the list.
  • After selecting the headset, the identification process will begin. While the headphones are connected to the phone, the distance between the devices should not be more than 10 meters, it is desirable that there are no walls between them. When the process is complete, the smartphone and headphones will be tied to each other.

If you have not canceled the pairing between the devices, then you will not need to do this in the future. The earbuds will automatically connect to the phone when turned on. Please note that the headset cannot work with multiple sources at once. Also, when a new device is connected, the binding with the old one may be reset.

The recommended distance is 10 meters. In rooms and in the presence of obstacles such as walls, the distance may decrease. The whole process is simple and straightforward if the devices are working properly. After completing all the steps, you can easily and conveniently use the headphones.

Pairing and connecting with an Android smartphone

Pairing is the process required to create a bond between Bluetooth devices to establish a wireless connection. You need to pair your device with your headset to make a Bluetooth connection for the first time.

Before starting the negotiation, make sure that the following requirements are met:

  • The smartphone is located at a distance of 1 m from the headset.
  • The headset battery is sufficiently charged.
  • Smartphone user manual is at hand.
  • Enter headset pairing mode Turn on the headset when pairing the headset with the device for the first time after purchase or after initializing the headset (the headset does not contain pairing information). The headset will automatically enter pairing mode. When pairing a second device and subsequent devices (the headset contains pairing information with other devices), press and hold
    for about 7 seconds. Make sure that the indicator flashes blue and red alternately after you release the button. You will hear voice guidance “BLUETOOTH pairing”.
  • Unlock Android Smartphone Screen If Locked.
  • Search for this headset on your smartphone.
  • Select [Setting]. [Bluetooth].
  • Tap [] next to [Bluetooth] to turn on the Bluetooth function.
  • Press [WH-CH500]. If a message about entering the passcode appears on the smartphone display. enter “0000.” The headset and smartphone will be paired and connected with each other. You will hear the voice guidance “BLUETOOTH connected”. If not connected, see “AndroidConnecting to a paired smartphone”.
  • If [WH-CH500] does not appear on the display, try again from step 3.

    The link code may be called “Access Code”, “PIN Code” or “Password”.

    How to Connect Sony Headphones to Your Phone via Bluetooth. All Methods

    Sony wireless headphones connect to your phone via Bluetooth. To do this, you need to perform a series of sequential actions, which we will describe below.

    • Before connecting wireless headphones to a smartphone, you need to follow the general recommendations
    • Which Sony headphones are suitable for your phone
    • Are Airpods compatible with an Android smartphone?
    • How to connect via Bluetooth
    • Sony headphone app
    • How to connect Sony headphones to your phone
    • Pairing and connecting with an Android smartphone
    • Advice
    • Note
    • Can’t connect Sony wireless headphones
    • Why the connection might not be established
    • Missing sound after updating the phone
    • What to do if only one earphone is connected
    • Step-by-step instructions for connecting a Bluetooth headset:
    • What to do if you can’t connect headphones via Bluetooth
    • Video instruction

    Can’t connect Sony wireless headphones

    There are several reasons why the phone does not see Sony headphones:

    • detection timed out. After activating Bluetooth on the headset, it will be available for finding by devices for 5 minutes;
    • acoustics is trying to synchronize with another device. If there is another gadget nearby that was previously paired with the headphones, an unintentional disconnection may occur;
    • frequency noise. Connection problems create signals from Wi-Fi routers and other Bluetooth devices. This is especially acute in places where people are concentrated: public transport, shopping centers;
    • failure of the OS. Restart your smartphone, possibly a software violation due to downloading third-party software. If this does not help, go to the Bluetooth settings and remove the active connection with wireless headphones, then re-pair as described above.

    Users may encounter NFC connection problems, in this case:

    • hold the smartphone near the NFC tag until a successful pairing message appears on the device screen, which takes 30-60 seconds;
    • restart your phone and headset;
    • disconnect your mobile gadget from other audio devices connected via Bluetooth (speakers, earbuds);
    • bring the device with NFC connected again. When the pairing confirmation message appears, click Cancel. Repeat the operation again, just confirm the connection;
    • go to Bluetooth settings and remove the active connection with the headset. Repeat Connect with Label.

    If the headphones still do not connect to the phone, the Bluetooth module may be damaged. To verify this, try connecting the headset to a different phone or device. It is not recommended to repair the acoustics yourself because of the chance to permanently disable the gadget.

    Which headphones are suitable for Sony TVs?

    There are several options, each of the owners of Sony TVs can make a choice based on their own preferences:

    • In-ear. These are miniature headphones that are distinguished by their compactness and high-quality sound; they will suit all lovers of minimalism. Bluetooth is used to connect them. This type of earphone is quite expensive;
    • Overhead. Differs in excellent sounding, good, solid construction. All buyers note not only the ease of use, but also the affordable cost. Headphones are connected to the TV via Bluetooth. Just plug the adapter into the headphone jack to start enjoying high-quality sound;
    • Monitor. This model is full size, has good sound and durability. This is the choice of many buyers who want quality and inexpensive headphones. There are special models with a striking design.

    Where is the headphone jack on Sony TVs?

    Modern Sony TVs are equipped with several connectors that allow you to connect to a wireless headset. To connect your headset to the headphone jack, you just need to find the required jacks on the back of the TV. There is a corresponding output, which is designed to connect wireless headphones. Manufacturers almost always add instructions to avoid mistakes.

    Sony TV Headphones

    TV is the property of the whole family, it is a great opportunity to watch your favorite movies. But in some situations, you may need headphones for your Sony TV, which will allow you to retire in your thoughts or enjoy your favorite game. But long cables, which are very annoying for many, have already become an artifact; wireless headphones are popular today. They are of higher quality, more durable and more comfortable to use.

    READ  Is It Possible To Connect The Printer To The Tablet

    Wireless headphones

    Headphones are an excellent alternative to speakers. Wireless headphones for Sony have a number of undeniable advantages:

    • Wireless communication allows you not to limit yourself in actions;
    • It is very easy to figure out how to connect Bluetooth and enjoy high quality sound;
    • Wireless headphones to the TV allow you to abstract from external stimuli and focus on watching a movie or playing.

    Consider the most popular wireless headphone model:

    Sony MDR-XB650BT. They feature high-quality sound, solid construction, and striking design. Using Bass Booster allows you to get the most out of the rhythms of dance music. This is an oversized, but very comfortable headset that can be used not only to connect to a TV, but also during sports training.

    How to connect headphones to a Sony TV?

    To quickly and correctly connect headphones, you need to understand the design features of Sony TVs. There are 2 connection options. the rear panel is equipped with several connectors. It’s easy enough to figure out how to connect headphones to your TV.

    • Initially, you need to find the AUDIO OUT output, in some models it may be MONITOR OUT.
    • Using the MONITOR OUT jack, you can simultaneously receive sound from the headphones and the built-in speakers.
    • If you want to abstract yourself from society, you must use AUDIO OUT and first disable the functionality of the built-in speakers. After that, only the headset will be responsible for sound reproduction.

    How To Connect Bluetooth Headphones With A Sony TV

    How to connect to Android TV system?

    Sony TV owners often wonder how to sync their wireless headphones with Android TV. Everything is quite simple if you follow certain instructions that have been tested in practice. There is a certain algorithm of actions that allows you to do everything quickly and efficiently:

    • Initially, you need to display the Android TV menu on the screen, find the icon for wired and wireless networks;
    • This is followed by turning on Bluetooth and searching for available devices;
    • Now it’s time for headphones, they need to be turned on, set up a search in Bluetooth;
    • After the TV detects them, you can start connecting;
    • If you did everything correctly, you will see an inscription on the screen that headphones of a certain brand are connected.

    In the future, the headphones will automatically connect to the system, when you turn on Bluetooth, just wait a little.

    Connecting to a Sony TV

    Connecting additional devices allows you to significantly expand the functionality and makes the control of the TV more comfortable. But not all owners know the correct connection and configuration of additional devices. For example, people often wonder how to connect to the Internet for the full functioning of Smart TV. This and other questions will be discussed in more detail in this topic.

    In this article, you will learn how to connect digital TV


    If you use the TV to constantly watch videos, listen to music or visit sites, then for this case, a mouse will be a more suitable tool for switching and searching. The mouse can be wireless or with a wire.

    For example, using the remote control for these purposes is not very practical and causes difficulties in operation. The main job of the remote control is to change channels and adjust the volume. Otherwise, it is better to use the mouse.

    In order to connect to the TV, you need to do the following:

    • We insert the Bluetooth transmitter from the mouse into the USB port, which can be found on the back panel or side of the TV.
    • On the TV screen, you must confirm the activation of the device and turn on Bluetooth in order to synchronize.
    • A new device notification window will appear. You must wait until the end of the process.

    Then you need to take the remote control and confirm the next action by pressing the OK button. A message appears that the connection has been established.

    A computer

    Connecting a computer to a TV will interest mostly avid gamers. Sometimes the monitor is not enough and you want to expand the boundaries of the image in order to fully enjoy the game process. But alas, not all of them know how to make such a connection. I would like to clarify and help in this not difficult matter.

    Connecting a laptop to a Sony TV is done in three ways:

    • Connect the VGA cable.
    • Optionally with a DVI cable, using the TV as a monitor. But with this method, the quality of the depicted object will be significantly lower than the original.
    • The best way is to connect with an HDMI cable. This connection makes it possible to transmit all the quality of the image and sound.

    If there are no ports on a laptop or TV, it is possible to connect using hybrid cables with different connectors.

    You can choose any connection method, but if you want to fully enjoy the quality, then you should definitely use the third method. Situations are of course different. Someone does not have the necessary connectors, someone is experiencing temporary financial difficulties and cannot use the connection via an HDMI cable. Then it is worth remembering that there are two more ways.

    Bluetooth earphone

    In order to enjoy wireless listening to television, it is enough to know how to connect Bluetooth headphones to a SONY TV, devoid of all sorts of wires.

    • It must be found in the settings. “pairing devices” via Bluetooth. Compatibility and connectivity may vary depending on the TV model.
    • Press the down arrow on the remote control and scroll to the “Settings” icon. Please note that some functions and applications may not be available. It all depends on the country and region of residence of the owner.
    • Then we find “Network and Affiliation and in it we open” Bluetooth Settings “.
    • Make sure Bluetooth is turned on.
    • Scroll down the list and click the “Device List” button.
    • The TV can connect to multiple devices. The number of connected devices may vary.
    • In order to connect a new device, you must click on the plus. When doing this, make sure the device to be connected is within reach and with Bluetooth connected.
    • When the device is found, it will appear on the menu screen and show as “Unknown.”

    In this video, you will learn in more detail how to connect a digital TV:


    There are three ways to connect iPhone to Sony TV. It’s over Wi-Fi, USB and HDMI. It is worth disassembling them in more detail.

    • In the phone settings, you need to go through the following windows that open. Settings. Wireless networks. Wi-Fi. Wi-Fi Direct. It happens that the last tab is missing, then you need to go to the “Additional settings” menu.
    • After this action, the search for available networks is activated.
    • Let’s move on to setting up TV. Using the remote control, open the menu on the TV and find “Network”. A window with possible connection methods will open. Choosing Wi-Fi Direct.
    • The next step is to confirm the connection of the phone on the TV screen.

    After that, the connection can be considered complete.

    • This connection requires a special output on the phone. In case of its absence, an adapter can help.
    • Select the signal source on the TV screen. HDMI.
    • We connect the smartphone using a cable.
    • The system will determine what screen resolution is needed and display it on the TV screen.

    The settings are complete and the TV is ready to play the phone resources.

    • We take a USB cable and use it to combine the TV and smartphone.
    • In the TV menu, open the Signal Sources, among other things, you need to opt for USB. By the same principle, it is necessary to carry out actions on a smartphone. Synchronization confirmation window will appear on its own.

    Everything will be displayed on the screen as if you were working on a computer. You can open folders, view pictures, videos or listen to music. All this is controlled by the remote control.

    the Internet

    Before you start connecting the Internet to your Sony TV, it is worth choosing the type of connection you are using. It can be a local network or a wi-fi connection.

    And now about connecting to a local network in more detail:

    • We bring the Internet cable from the router to the TV. But before that, you need to make sure that both devices are turned off.
    • We take the remote control, turn on the broadcasting device and press the “Home” button on the remote control.
    • At the top of the screen, we find the “Settings” icon and click ok.
    • In the window, click on the line “Network”.
    • Next “Network settings”.
    • Network connection settings.
    • Next, two buttons “Simple” and “Specialist” will appear. Because ordinary TV owners are unlikely to possess the skills of special setting, it is worth choosing the “Simple” menu.
    • If the cable was connected in advance and correctly, then the setup should start at the same minute.
    • Repeat all the steps as described when connecting a local network, but at the end you will need to select the type of network to be connected. wi-fi.
    • Then a window with a password will be displayed.
    • After the password is entered correctly, the connection will start.

    First you need to choose the type of connection

    Sony TV: How to Connect a Digital TV

    The modern world has made great strides in technology and TV is no exception. LCD TVs can easily replace your computer. Owners can connect them to the Internet (local or wi-fi), go to any of their sites of interest, use TVs to watch videos or listen to audio. But without additional devices, work will be difficult.

    NNCXV.INFO 2021