How to Deep Clean Your Printer

How to enable printer cleaning. Cleaning the printer’s printheads via a computer

Printhead problems are NOT rare under constant workloads of print devices. This occurs when streaks or gaps remain on the paper when printed documents. Basically, inkjet printers manufactured by well-known companies Epson, HP and Canon suffer from this problem.

Contamination and ways to eliminate them

Even under normal operating conditions for printing equipment, you cannot be sure that all elements will work perfectly. If the use of consumables is not properly controlled, often unexpected equipment malfunctions occur. There are several variants of events in which the most sensitive working parts of the printer are affected, namely the head. Clogged nozzles occurs when:

  • The ink inside the head is dry;
  • Clogged ink supply channels;
  • The level of ink supply to the cartridge has increased;
  • The ink supply system is depressurized.

To solve problems with a clogged head, the creators of printing equipment have included a special utility in the control system for its operation. In most cases, it helps to get rid of print defects problems.

Steps for cleaning an Epson printer

There are two methods of head cleaning: hardware and manual. In the first case, you need to proceed as follows:

Through the “Start” menu open the “Devices and Printers” window;

Select the connected printer with this problem and open the “Print Settings” context menu by right-clicking on it;

In the “Service” tab, find the “Head cleaning” function and execute it.

It may be necessary to carry out this procedure several times so that the ink under the working pressure pierces the nozzles of the head. To check the print quality, use the test page printout, which the device will automatically suggest to do after each cleaning.

Recovering Canon and HP Devices

Exactly the same steps should be taken for head cleaning in Canon printing devices.

The HP inkjet printer drivers have a software control system that is linked to the HP Problem Resolution Center. It can be accessed through the printer’s Options menu, where you will find the Printer Toolbox. The Cleaning tab will guide you through software cleaning of the printheads in the same way as above.

How to clean the printer

Do you have an inkjet, laser printer, basic cleaning will prolong printing. You don’t have to wait for the printer to spit out distorted print or smeared pages to try to clean it up. Cleaning the printer should be part of your regular maintenance. To clean the printer, you will need rubbing alcohol, a cotton swab, a vacuum cleaner or air canister, and a clean cloth.

If you see streaks or smears on the paper, clean the roller or roller to remove any accumulated ink. Then use a vacuum cleaner or compressed air to remove any remaining ink or dust particles from the printer.

Cleaning the inkjet printer

If you are having problems with your inkjet printer, what to do:

Remove the ink head or cartridge.

Gently clean the printhead contacts with a little rubbing alcohol on the sponge.

Or you can dab some rubbing alcohol on a stiff bristled brush and clean the contacts. After cleaning, apply a little rubbing alcohol to the printhead to wash away any broken bristles. Do not worry. Evaporates very quickly

Wipe off excess ink from the nozzles.

Reinsert the cartridge.

Run a test print to make sure you get rid of excess ink.

If that doesn’t work, insert a new ink cartridge. This should fix the problem.

Cleaning the laser printer

Laser printers have a corona wire that distributes toner. Use the illustrations in the manual for your printer to find out where it is. Here’s how to clean the corona wire:

Unplug the printer and turn it off.

Blow dust around the drum and corona wire.

Use compressed air, a vacuum cleaner nozzle or a hairdryer.

Dampen a cotton swab with rubbing alcohol.

Gently wipe the corona wire with a swab to remove any toner and dust left on the wire.

About the author of the book

Gary and Peg Headstrom. Self-taught repairmen with experience in carpentry and plumbing work, home appliance repair and much more. Judy Ondrla tremors. Writer and editor of various newspapers and magazines.

Cleaning the page after every printed page! HP Support Community

My HP LaserJet 200 colorall-in-one printer M276nw was new in 2016 and has run a cleaning cycle for every print job in the past 5 months. This becomes more and more frustrating to use as it delays all printing as every page printed requires a cleaning cycle to run.

Start print job

Print page

The printer displays “Cleaning. “

4.The cleaning cycle is in progress

The printer displays “Device error. Click [OK] to continue.

Go to step 2 again until the task is completed.

I invited this site and others, I just replaced all 4 ink toners with OEM HP LaserJet toner as needed.

The problem still persists.

Paper settings:

Default paper size: Letter

Default paper type: Plain

Tray 1 Size: Letter

Tray Type 1: Any Type

Paper out time: 0

Out of Paper Action: Cancel

Manual feed: Off.

Please help me with this I do not understand why he continues to clean up.

This is a drum that needs to be cleaned?

Why does this error occur after limited home office use for 2 years.

A moment.

Turn on cookies and reload the page.

This process is automatic. Your browser will soon redirect you to the requested content.

Wait up to 5 seconds.

Problems getting the printer?

If you have a Deskjet 3630, Deskjet 3700, or Deskjet 2600 printer, you can only get a Claim Code by printing the page. If only one cartridge is empty, remove it and try to print a page with the remaining cartridge.

How to clean the print head (PG) of an Epson printer

We offer you the proven Epson SG cleaning techniques. How to properly clean the Epson print head?

This article introduces proper flushing with Epson printheads! There are many different ways of flushing the Epson printheads, but we will consider here only the most useful and most effective ones, Which can answer such a difficult question: “How to flush a head in an epson printer?”.

If your Epson product “got sick with horizontal streaks,” then debris has entered the Epson printhead (PG). You can get rid of it in the following ways. They should be used exactly in the sequence in which they are proposed here.!

The Epson print head, or rather it is cleaned from the device utility. Click “Start”, then “Printers and Faxes”, select your device, right-click on it, select “Printing Preferences” from the offered one, and you will have the following menu, click “Service”. Select the “PG cleaning” mode, and print the test, if your test lacks the necessary “lines”, you should not do the cleaning again.

If the number of missed nozzles has increased, it means that the amount of debris in the Epson print head is so great that as a result of cleaning from the printer utility, it shakes up and begins to “come out”.

Using a cleanser called “Sandwich”. Its essence lies in passive soaking with active chemical detergents. Hereinafter, under the soaking liquid, we mean the liquid “Mister Muscle” (MM), green or blue, but only for washing glass! Before installing the “sandwich” ALWAYS Remove the cartridges, or CISS.
To install the “sandwich”, turn on the device, select to replace the cartridge when the carriage with the PG moves to the position of replacing the cartridge, Unplug the power plug from the power outlet, move the carriage to the left, in the lower right part of the device you will see the LP seat when parking, it looks like a foam rectangle edged with rubber.

You need to make a template for further procedures. Attach a piece of thick paper or a plastic bottle to the mouthguard, on which the outline of the mouthguard will be printed

Take a thick, lint-free cloth, attach a template print to it, and cut this print from the fabric

Glue the fabric to the paper on double-sided tape, or with glue. Moment, the fabric to the paper, so it will NOT stick out of place; wet cloth adheres to metal, and it will be difficult to peel it off from the PG of this strip, put the resulting strip on the mouthguard, with the cloth up, draw 5 ml of MM into the syringe, and drip it onto the cloth,

Wait a while, and then drip some more. this is the “sandwich”. Do not be afraid that a certain amount of MM will pour out of the mouthguard, everything is designed for an excess of liquid. Does not turn on the printer, move the PG carriage with your hands to the maximum right position, i.E. “Park” manually. After 12 hours does not turn on the device, move the carriage manually and Remove the “sandwich”, install cartridges or CISS, return the carriage to the position of replacing cartridges, and Connect the device to the network. After turning on, the device will automatically go into cleaning mode, after which do step 1. If the position with the non-printing nozzles has improved, and there are fewer of them, then continue this daily. If during 14 days some nozzles did NOT work, go to the next level. To enhance the effectiveness, we put on the PG needles, dropper pieces at the moment of soaking, and Fill these pieces with rinsing, i.E. MM, this is how the cleaning works from both sides.

READ  Algorithm for Printing a Document on a Printer

Forced cleaning with a syringe. All subsequent actions are recommended if you have technical skills. Take a 5 ml syringe, cut 5 cm of the tube from the blood transfusion system, put one end of the tube over the nozzle of the syringe without a needle. Set the PG in the position of replacing cartridges, Remove cartridges or CISS, Unplug the device from the network. Move the steam generator to the left to the middle, so that the rinsing falls on the foam sponge and does NOT drain onto the gears. Draw 2 ml of MM and 2 ml of air into the syringe (i.E. 50:50 air to flush ratio). Slide the free end of the tube over the PG needle. Press down on the syringe plunger by squeezing the air in it from 2 ml to 1 ml.

Attention! DO NOT push too hard, the Epson printhead has adhesive bonds that break under strong pressure! If the ink begins to leave the syringe, it means that the nozzles are partially clogged and it is recommended to push further before emptying the syringe, at the end of flushing in the syringe, and without removing the syringe, pull the plunger up, 2 ml, then press it all the way down, creating bubbles at the steam generator outlet. Such actions create the effect of cavitation at the steam generator outlet, enhancing the cleaning efficiency. Pump the PG with foam 10. 20 times, then I will dial again MM and air and push through the entire MM, trying not to let air into the PG, left 0.3 ml of MM in the syringe. Repeat for the remaining colors. Important! Do not allow flushing to spray on the surface of the carriage, a small amount is allowed in the cavity around the PG needles, put toilet paper around the needles, and change it when it gets wet. If flushing is abundant, dry the steam generator carriage with a hair dryer, and do not overheat. But if the ink does NOT come from the syringe, and you have already made a “sandwich”, there is another way.

Ultrasonic bath syringe. From the name it is clear that this method will require an ultrasonic bath, into which you need to pour MM 5mm from the bottom. The use of MM in this case is of great importance. when it hits the surface of the internal parts of the steam generator, it minimizes electrical shorts, probably due to low electrical conductivity. Attention! I constantly monitor the amount of flushing into the bath, pump out the excess with a syringe, if the flush gets inside the steam generator, onto the surface of the printed circuit board, it will irreversibly disable it forever! We will NOT describe the removal of the PG here, look for the removal scheme in the corresponding section. Type MM 50:50 into the syringe with air, turn on the bath, lower the PG by 2-3 mm into the liquid, the PG did not become the bottom of the bath, keep the PG suspended in the liquid and We will pump it with a syringe, repeat for each color.

Perform quality control visually, lift the Epson Stylus print head from the tray, and carefully look at the nozzle section. When pushing with a syringe, you should see rain from the flush. A high-quality flushing is one in which the rain from MM consists of parallel non-“Oblique” streams, without gaps.

If it is not possible to blow through all the nozzles in 10-15 pumpings, use the “back and forth” system, but only in air, i.E. Not in liquid, because sucking liquid from below through the nozzles will lead to debris getting into the Epson Stylus print head, which will disable it! Some nozzles still do not work. put the steam generator in the tray, Cover with a cloth, (since the condensate resulting from the lid will get inside the steam generator) Unplug from the outlet and leave overnight, check the immersion depth of the steam generator. no more than 5 mm. Then repeat the whole cleaning again.

In some cases it is sometimes very difficult to clean one or two curved nozzles, and in such cases, cleaning helps. Finger that simulates cleaning with a rubber scraper on the printer. Pressing the syringe into the problematic MM color, make cleaning movements with your finger along the surface of the nozzle plate, then visually control the rain, after such procedures, uneven beating nozzles very often break through. If as a result of cleaning within 14 days, the nozzles did not break through, then the PG will remain unrefined. Due to the fact that the cost of Epson Stylus printheads in service sometimes exceeds the cost of the device, the choice is yours. Well, we congratulate those who have cleaned all the nozzles! After cleaning, dry with a steam generator and place on a windowsill on the sunny side. Dry the Epson Stylus printhead for 3-5 days, then very carefully install the PG onto the device. Repeat step 1.

Cleaning the HP Printer Head

If you begin to notice a deterioration in print quality, streaks appear on the finished sheets, some elements are NOT visible or a certain color is missing, it is recommended to carry out the printhead cleaning procedure. Next, we will take a closer look at how to accomplish this owner of HP printers.

Cleaning the HP printer head

The print head is the most important component of any inkjet device. It consists of many nozzles, cameras and various boards that spray ink over the paper. Of course, such a complex mechanism can sometimes malfunction, and most often this is due to clogging of areas. Fortunately, head cleaning is easy. Any user can make it on their own.

Windows cleaning tool

When creating the software component of any printer, special service tools are almost always developed for it. They allow the owner of the equipment to carry out certain procedures without problems, for example, checking the nozzles or the cartridge. The service also includes a head cleaning function. Below we will tell you how to launch it, but first you need to connect the device to the PC, turn it on and make sure it works correctly.

Next, you need to do the following:

    From the Start menu go to Control Panel.

Find your equipment in the list, right-click on it and select “Printing Preferences”.

If for some reason the device is NOT displayed in the list, we advise you to refer to the article at the following link. In it you will find detailed instructions on how to fix the problem.

Read the warning and instructions in the displayed window, then click on “Run”.

Wait for the cleaning to complete. During it, do not launch any other actions. this recommendation will appear in the warning that opens.

The menu type may look different depending on the printer model and all-in-one printer. The most common variant is when the tab has the name “Service”, and it contains the tool “Cleaning the printheads”. If you find one, feel free to run.

Differences also apply to instructions and warnings. Be sure to read the text that should be displayed in the window that opens before starting the cleaning.

This completes the cleaning process. You can now run a test print to make sure you achieve the desired result. This is done like this:

    In the “Devices and Printers” menu, right-click on your printer and select “Printer Properties”.

In the “General” tab, find the “Test Print” button.

  • Wait for the test sheet to print and check it for defects. If found, repeat the cleaning procedure.
  • Above, we talked about the built-in maintenance tools. If you are interested in this topic and you wish to further adjust the parameters of your device, read the article at the link below. There is a detailed guide to properly calibrating the printer.

    OSD menu all-in-one printer

    For owners of multifunctional devices that are equipped with a control screen, there is an additional instruction, and not requiring the connection of equipment to a PC. All actions are performed through built-in service functions.

      Move through the list by clicking on the left or right arrow.

    Find and tap on the “Settings” menu.

    Open the “Service” window.

    Select the “Head Cleaning” procedure.

    Start the process by clicking on the indicated button.

    When finished, you will be prompted to perform a test print. Confirm this action, check the letter and repeat the purge if necessary.

    In the case when all the colors on the finished paper are displayed correctly, there are no streaks, but horizontal stripes appear, the reason may not lie in the contamination of the head. There are several other factors that influence this. Read more about them in our other material.

    So we figured out how to independently clean the print head of the printer and multifunctional device at home. As you can see, even an inexperienced user can cope with this task. However, if even repeated cleaning does not bring any positive result, we advise you to contact the service center for help.

    Disk Cleanup in Windows 10, 8.1 and 7: Advanced Setup and Scheduled Start

    Disk Cleanup is perhaps the safest way to get rid of the accumulated “junk” on your hard drive. Disk Cleanup is very effective at deleting unnecessary things, but it doesn’t take away any important files or lead to errors. As a rule, third-party utilities promise to clean everything to the ground, while doing it quickly and safely, but experiments with such software do not always go smoothly. Yes, they will clean up a few extra megabytes, but this cleaning can compromise stability. Unfortunately, not all authors of such utilities understand this. Sometimes, following the material on Disk Cleanup continues to search for information on how to recover files, how to fix an error, or how to reinstall Windows.

    READ  How To Print A Document From A Tablet Printer

    Standard start

    Start. All programs. Standard. Service. Right click Click Disk Cleanup, and select Run as administrator.

    Running as administrator gives you immediate access to system file cleanup, as well as two additional cleaning methods. If you do not run the utility as an administrator, you can continue to clean up system files later, but then you will have to wait again while the utility scans the disk.

    If there are several disks, then at startup, you should select which of them will clean up:

    Disk cleanup tab

    The content will vary depending on the availability of certain files.

    For non-system drives, as a rule, only the “Trash” item is available.

    For the system disk, several items are always present:

    • Downloaded Program Files
    • Temporary files from the Internet
    • Basket
    • Temporary files

    The rest are displayed only if there are files:

    • Temporary Setup Files
    • Debug dump files
    • Old Chkdsk files
    • Previous Windows installations
    • Setting up log files
    • Memory dump files for system errors
    • Minidump files for system errors
    • Temporary Windows installation files
    • Sketches
    • Files thrown by Windows update
    • Custom Error Reporting Archives
    • Custom error reporting queues
    • System error reporting archives
    • System error reporting queues
    • Updated Windows log files

    Advanced tab

    • Programs and Features. Opens the Programs and Features component in Control Panel, where you can uninstall unused programs. The Size column in the Programs and Features component shows how much disk space is used by each program.
    • System Restore and Shadow Copy. Removes all but the most recent restore points from the disk. System Restore uses restore points to return system files to a previous state. If your computer is running smoothly, you can delete earlier restore points to free up disk space. In some editions of Windows 7, restore points may include previous versions of files, called shadow copies, and archive images created with Windows CompletePC backup. These files and images will also be removed.

    Settings

    An interesting feature exists in the program. Setting various configurations for automatic cleaning. For example, you can create one for complete cleaning, the second. To delete the contents of the TEMP folder (temporary files), third. To delete sketches, etc.

    Where n. Any integer between 0 and 9999, inclusive. This is the number. Configuration number (accordingly, you can create 10,000 different configurations), it must be remembered for further launch.

    We set the necessary flags:

    And confirm saving with the “OK” button.

    Repeat steps 1-3 to create each configuration. I will create the 3 above:

    Cleanmgr / sageset: 1.complete cleanup,

    Cleanmgr / sageset: 2.Cleaning the TEMP folder,

    Cleanmgr / sageset: 3.Deleting thumbnails.

    Where settings are stored?

    The settings will be entered into the following section of the system registry:

    Startup with configured parameters

    To start disk cleanup with configured parameters, you must use the command:

    Where n. Configuration number specified during setup.

    It is convenient to create a shortcut with this command (I will have 3 of them):

      Right-click on the desktop. Create. Shortcut.

  • Click Next and set a name. We start creating a shortcut with the Finish button.
  • Repeat steps 1-3 for each configuration.

    When you start cleaning with this command (shortcut), the program will display a window showing the progress of cleaning, but will not ask additional questions.

    If necessary Get access to all files. Run as administrator (method or).

    Scheduled launch

    You can easily maintain order on the HDD by automatic regular cleaning launched from the task scheduler.

    Launch the task scheduler (Start. All programs. Standard. Service. Task scheduler) and click Create task:

    Specify a Name for the new task and check the Run with Highest rights box:

    Go to the triggers tab, click Create, set the desired cleaning interval (for example, once a week, as in the screenshot below). Click OK:

    Go to the Actions tab, click Create, in the next window, click Browse:

    Specify the path to

    And click Open:

    In the Add arguments field, specify:

    Where n. Configuration number specified during setup.

    Click OK:

    And OK again:

    The task has been created and will perform automatic cleaning once a week (in my case). When launched, the program will display a window showing the progress of cleaning, but will not ask additional questions.

    Cleanup in disk properties

    The presence of the Disk Cleanup button in the disk properties depends on the file deletion method specified in the recycle bin options.

    Right-click on the recycle bin and select Properties:

    • If “Set size.” Is selected. The Disk Cleanup button will be in the disk properties.
    • If the item “Shred files immediately.” Is selected. The button will not be in the disk properties.

    Cleanup in the context menu of the disk

    To add the Disk Cleanup item to the context menu of the disk, use the registry tweaks:

    The tweak must be added to the REG file and imported into the registry, details are here.

    Selecting this item will start cleaning for the selected disk.

    Cleaning the Printheads from Your Computer

    The printhead cleaning function allows you to clean the printhead nozzle. If one of the colors is Faint or Does Not Print, although ink is NOT run out, clean the printheads.

    deep, clean, printer

    Cleaning the printheads is done as follows.

    Cleaning

    Click the Cleaning button on the Maintenance tab.

    When the Print Head Cleaning dialog box opens, select the ink tank group you want to clean.
    Click Initial Check Items. To display a list of items to be checked before performing cleanup.

    Make sure the machine is turned on and Click Execute.

    Cleaning of the printheads starts.

    The Nozzle Check Dialog Box opens after a confirmation message.

    To check if the print quality has improved, click the Print Check Pattern button. To cancel the check, click the Cancel button.

    If a one-time cleaning did NOT clear the clogging of the printheads. Repeat cleaning again.

    Cleaning uses a small amount of ink.
    Frequent printhead cleaning will quickly deplete the printer’s ink supply. Therefore, clean only when necessary.

    Deep Cleaning

    The Deep Cleaning function works harder than the Cleaning function. If Cleaning twice does not correct the print head problem. Perform deep cleaning.

    Click the Deep Cleaning button on the Maintenance tab.

    When the Deep Cleaning dialog box opens, select the ink tank group for which you want to deep clean.
    Click Initial Check Items. To display a list of items to be checked before deep cleaning.

    Perform deep cleaning.

    Make sure the machine is turned on and Click Execute.
    When the confirmation message appears, click OK.

    Deep cleaning of the printheads starts.

    Complete deep cleaning.

    The Nozzle Check Dialog Box opens after a confirmation message.

    To check if the print quality has improved, click the Print Check Pattern button. To cancel the check, click the Cancel button.

    Using the Deep Cleaning function consumes more ink than the Cleaning function.
    Frequent printhead cleaning will quickly deplete the printer’s ink supply. Therefore, clean only when necessary.

    If no improvement is noticeable after performing Deep Cleaning, turn off the product. Wait 24 hours, then perform the Deep Cleaning procedure again. If there are no signs of improvement, see the section “Ink is NOT delivered”.

    Solving problems with print quality of the printer after refueling

    The ink in the print cartridge periodically runs out, so it should be refilled to get quality documents again when printed. However, sometimes it happens that after installing a new cartridge or filling it up, the print quality, on the contrary, deteriorates. There are several reasons for this problem, each with a different solution. This is what will be discussed further.

    We solve the problem with the print quality of the printer after refueling

    The following methods, with the exception of the first, are suitable only for the owner of inkjet devices. If you have a laser printer in use, it is better to contact the service center to solve the problem of auto products, since the design of such ink tanks is a little more complicated, and the malfunction may also be in completely different components, only a professional can diagnose this.

    Disabling economy mode

    Periodically, users of intent either accidentally turn on economical or fast printing mode in the printer settings. In addition, system failures sometimes occur, which provoke a configuration change. It takes a couple of minutes to put the device into normal mode, so we will consider this method first. You will need to do the following:

    • Connect the printer to the network, computer and turn it on.
    • Open “Control Panel” from the “Start” menu.

    Go to “Devices and Printers”.

    Find your device there, right-click on it and select “Print Settings”.

    It happens that peripherals are NOT displayed in the list, then you need to manually add them or fix the problem. Our other article at the following link will help you deal with this.

    You will see a window with the “General” or “Quick Installation” tab. Make sure Fast (Speed ​​Priority) is unchecked and Print Quality is set to Standard or High.

    Don’t forget to apply the settings after making changes.

    Now you can restart the printer and try to print to get acquainted with the quality of the finished document.

    Software cleaning

    Most printers have several additional functions in their driver that allow you to calibrate or clean the components. In the case of poor quality, we are interested in the tools “Printhead cleaning” or “Cleaning”. To start this process, do the following:

      Go to the device settings menu again through “Devices and Printers”.

    In the window that opens, switch to the “Service” or “Service” tab. There you will see functions for cleaning the printheads and nozzles. Click on one of the tools.

    Follow the guide that you see on the screen carefully.

    After completing the procedure, check the print quality. If it is still unsatisfactory, repeat the steps several times. If there is no result, go to the next method.

    READ  How To Print The Last Document On A Printer

    Checking the tightness of the cartridge

    Sometimes new cartridges have leakage problems. This is quite rare, mainly due to improper handling of the component or its marriage. You need to carefully remove the ink bottle from the device. How to do this, read in step 1 and step 2 in our other material at the link below.

    Then it remains only to cover the surface of the table with white paper and shake the cartridge over it. If ink gets on the sheets, you must dispose of this bottle and purchase another one. Be sure to carry out all operations with gloves. toner is difficult to wash from hands.

    Cleaning the pick rollers

    There are special rollers in the printer that grip the paper for printing. If they are dirty, defects may appear on the finished documents. Cleaning them is available at home, it is only important to follow the following instructions:

    • Turn on the device, connect to the computer and start it.
    • Take out all the paper, then prepare one letter, on the edge of which apply a small amount of dish soap. Insert this side into the printer and hold the top with your hand.

    Take any text file or image, right click on it and select “Print”.

    Make sure the active device is selected and click on “Print”.

  • Hold the paper until the out of paper notification is displayed.
  • You need to repeat this process several times, after which you can start a test print and check if the quality has returned to normal.

    Cleaning cartridges

    It is worth resorting to using this method only when the first four have not brought any results, since the likelihood that the new ink tank needs to be cleaned is extremely small. Most often, paint dries up if you have kept the container open for a long time. There are two options for how you can independently clean the nozzles and establish printing. Read more about this in our other article below.

    Above, you were introduced to five available methods to correct poor print quality after refilling a cartridge. All of them have different effectiveness and will be effective only in a certain situation. We hope our article helped you cope with the task.

    Self-cleaning of the cartridge: work algorithm

    When using an inkjet or laser printer, it may be necessary to clean the cartridge. At home, devices are often used irregularly, but, despite this, they need proper care. Timely cleaning contributes to high quality printouts and extends equipment life. Do-it-yourself cleaning can be done hot and cold. In order to carry it out on time, you should know the first signs of problems with cartridges.

    Signs for cleaning

    The fact that there is a need to inspect inkjet printer cartridges is evidenced by a number of printing defects, the main of which are as follows:

    • On test prints, templates contain uneven or fuzzy lines;
    • During device operation, ink blots appear on the leaves;
    • One or more colors are missing when printing a check template;
    • Horizontal streaks appear on the paper when taking photographs and other color images.

    Poor print quality

    The considered defects are typical for different device models, for example, Epson, HP, Samsung, Canon. When it does not help to get rid of an unpleasant phenomenon, then it will be necessary to clean the device cartridges. There are several reasons why you need to do this regularly:

    • During downtime, it may happen that dried paint is in the nozzles, and it will need to be removed to remove blockages;
    • Dust from the air settles inside the printer, especially on units covered with ink. printheads, cartridges.

    For laser devices, clean up when replacing toner. At the same time, old paint and other contaminants are removed from the cartridge. The work is carried out using napkins, cloth or lint-free brush. It is important that the electrical contacts remain clean. Work is performed according to certain algorithms and does NOT require special skills.

    Software cleaning

    Many inkjet machines are equipped with built-in automatic cleaning programs. To carry it out, proceed as follows:

    • Open the control panel;
    • Go to the settings of the printing equipment;
    • There they select the required section. “Tools and cleaning the cartridge”;
    • Make a test printout of a blank sheet.

    If there is no function, then you can download the program from a disk or the Internet and install it. Then, in the print settings, select the “Maintenance of printers” section, then you need to open the print settings, start cleaning. In this case, you should follow the instructions of the program. Most often, the procedure must be performed repeatedly.

    When the software method did not help, then you can get rid of the problem in several other ways. For different models of inkjet technology, the algorithms are the same, only the way to access the cartridges is different. This may require a set of screwdrivers with different attachments.

    The scheme of work, regardless of the chosen cleaning method, is as follows:

    • Removing the cartridge
    • Soaking;
    • Flushing;
    • Drying;
    • Refueling;
    • Installation in printer
    • Course printout.

    Cleaning with detergent

    To implement the cold method, you will need to stock up on such available tools and materials:

    • Rubber gloves (medical)
    • Syringe;
    • Napkins (cloth) made of paper or cotton;
    • Clean water;
    • Pipette;
    • Special glass cleaner containing isopropyl alcohol or ethylene glycol.

    The whole process takes place in the following sequence:

    • Remove the cartridge from the printer;
    • Position it nozzles up (on a specially lined fabric)
    • The cleaning liquid is applied to them in a few drops using a pipette;
    • Wait about 10 minutes;
    • Then the nozzles get wet with a napkin, wipe them dry with a cotton cloth.

    Removal may require a screwdriver, depending on the model of the device used.

    The manipulations discussed above are not always enough. If the nozzles remain clogged, then the operation continues:

    • Take a small container;
    • Fill it with cleaning liquid, pour in approximately 3 mm layer;
    • Immersed in the nozzle;
    • Keep them in liquid for 3 hours,
    • Take out and wipe dry.

    After wiping the cartridge nozzles in the working position with a cloth, an ink mark should remain on it, which is a characteristic result of complete cleaning. As a container for the detergent composition, an ordinary plastic lid from under a can is suitable.

    Manual injection

    In order for the ink from the cartridge to get onto the paper, a set of certain mechanisms is used inside. The design is such that it is possible to manually push a certain amount of ink, which will allow you to clean the nozzles. There are 2 ways in total.

    Method 1 (hard)

    This method requires a regular syringe.

    • Find a small hole on the back of the cartridge. It acts as an air intake. It is necessary to insert a needle into it, put on an empty syringe. You need to insert just enough so that it rests. The part of the needle remaining outside should be measured.
    • Here is the end of the needle, cut off the amount that does not fit. Next, you need to take a small piece of rubber material and put it on the base of the needle. It will serve as a gasket and will not allow unnecessary physical impact on the plastic, which can lead to breakage.
    • Place the paper cartridge with the nozzles down. It will absorb any dye that should drip during cleaning. Reinsert the syringe, but with air, and slowly squeeze it out until drops appear on the nozzles.

    Now it remains to remove the allocated ink, and you can start printing.

    Method 2 (simple)

    To clean the cartridge using this method, you will need a rubber pad, which can be included in its kit (not all models have it). If it is provided by the manufacturer, then the sequence of actions is as follows.

    • The cover has a hole. You need to insert a syringe into it without a needle.
    • Now, with the syringe installed, it is placed on the cartridge.
    • Holding the hopper with paint on the table, and pressed the pad (it creates a kind of vacuum), you need to pull the syringe plunger towards you, pulling the ink out of the hole.

    This completes the cleaning process. All that remains is to make sure the ink does NOT leak. If there are any residues on the injectors, then they are simply removed.

    Prevention of malfunctions

    Any technique requires proper maintenance and operation, which helps to avoid many problems. For the printer to serve for a long time and without interruption, it is enough to follow these recommendations.

    • The area where the printing equipment is located should be kept clean. Wet weekly cleaning is essential as dust is the printer’s or all-in-one printer’s worst enemy.
    • Once a month, it is worth carefully cleaning the printer with a vacuum cleaner. This will collect dust and ink particles (in laser printers). Places wet from paint should be removed with a cloth.
    • Each printer has a software method for cleaning the printer head. How to start it can be found in the instructions for the device. This cleaning should be regular.
    • If the printer is in color, and most often only black text is printed, then it is worth conducting a test color print once a week. Otherwise, paint may dry out and clog the nozzles.
    • When refueling laser printers, experts recommend cleaning the waste ink hopper regardless of its fill level.

    When cleaning the cartridge, it is NOT required to do any complicated manipulations, but the procedure itself is quite laborious. The easiest option for independent work is to use the Special built-in programs. If none of the considered methods will lead to the desired result, then it is necessary to remove the contamination from the components of the technique involved in printing. When this does not help, then you should contact the specialists of the service center. They will accurately establish the cause of the malfunction, advise options for its elimination.