How to Display Charge Percentage on Samsung Screen

Battery percentage on Android built-in system tools (System UI Tuner)

The first method usually works on almost any Android device with up-to-date versions of the system, where there is no charge percentage point in the settings. over, the method works even in cases where the manufacturer has installed its own launcher, which is different from the “pure” android.

The essence of the method is to enable the option “Show battery level as a percentage” in the hidden settings of the System UI Tuner, having previously enabled these same settings. This requires the following steps:

  • Open the notification shade so that you can see the settings button (gear).
  • Press and hold the gear until it starts to rotate and then release it.
  • The settings menu will open with the notification that “System UI Tuner has been added to the settings menu.” Keep in mind that steps 2-3 are not always obtained the first time (you should not let go immediately, as the gear began to rotate, but after about a second or two).
  • Now, at the very bottom of the settings menu, open the new item “System UI Tuner”.
  • Turn on the option “Show battery level as a percentage”.

Done, now the percentage of charge will be shown in the status bar on your Android tablet or phone.

Enabling Battery Percentage Display on Pure Android 9

In the latest versions of Android, you can enable the display of the battery percentage in the status bar using a simple setting (if you do not have one, use the methods from the following sections). Steps to enable:

  • Go to Settings and click on the item “Battery”.
  • Turn on the item “Battery level”.

These are all the necessary actions. the necessary information should immediately appear at the top of the screen of your smartphone.

How to enable battery percentage in Android

On many Android phones and tablets, the battery status in the status bar is simply displayed as “fullness”, which is not very informative. In this case, there is usually a built-in ability to enable the display of the battery charge as a percentage in the status bar, without third-party applications or widgets, but this function is hidden (except for the latest versions of the system).

In this manual. how to enable the display of the battery charge as a percentage by the built-in tools of Android 4, 5, 6 and 7 (when writing, it was tested on Android 5.1 and 6.0.1), separately. on the latest Android 9 Pie and newer, on Samsung phones Galaxy as well as a simple third-party application that has one single function. toggles the hidden system setting of the phone or tablet, which is responsible for displaying charge percentages. May Help: Battery Drain Fast on Android, How to Find Current Android Battery Capacity.

Note: usually, even without turning on special options, the remaining percentage of the battery charge can be seen if you first pull out the notification shade from the top of the screen, and then the quick action menu (charge numbers will appear next to the battery).

Battery Percentage on Samsung

Samsung Galaxy phones have a built-in function to turn on the display of battery charge in percent, but it is not in the most obvious location for beginners:

  • Go to Settings. Notifications. On the next screen, click on the item “Status bar”.
  • Turn on the item “Show charge percentage”.

After that, your Samsung Galaxy will show the percentage of charge next to the battery icon in the upper right corner of the screen, as required.

Using the Battery Percent Enabler app

If for some reason you cannot turn on the System UI Tuner, then you can use the third-party application Battery Percent Enabler (or “Battery with a percentage” in the Russian version), which does not require special permissions or root access, but reliably enables the display of the percentage of the charge batteries (moreover, the same system setting that we changed in the first method just changes).

  • Run the application and check the “Battery with percentage”.
  • You immediately see that the top line began to display the percentage of the battery (in any case, I had it), but the developer writes that you need to restart the device (turn it off and on completely).

Done. At the same time, after you changed the setting using the application, you can delete it, the percentage of the charge will not disappear anywhere (but you will have to reinstall it if you need to turn off the display of charging in percentage).

Distribution of new, sometimes interesting and useful materials from the remontka.pro website. No ads and free computer help for subscribers from the author. Other subscription methods (VK, Odnoklassniki, Telegram., YouTube, Yandex.Dzen)

Question about Demonstration in System Ui Tuner. There it is disabled for me, but in system processes this Demo mode works and it cannot be stopped or disabled (the buttons are not clickable). And the battery then eats, for 5 days from this process, 10% of the charge flies away. The phone has all default settings. Moto G4 Play. If anyone knows how to disable it, I will be grateful for the help. thank.

I don’t know the answer. Now I looked at my Moto X Play. there is such a process, but I used 0% of the charge in 3 days (from the moment of full charge)

Hello, I have a Moto-g, I press, hold, (for a long time) does not rotate. What to do?

Now on Google, they write that it works on Moto G3 / G4 From ideas. clear the cache and data of the “settings” application and try again.

Hello, sorry for not being in the subject, but still: tell me how to display the temperature of the battery / processor in the status bar?

READ  How to remove the front camera on Samsung

Without Root. nothing. And with Root there are different possibilities, like “CputTemp in Status Bar”.

There are many such applications. I use Phone temperature. Shows battery temperature simply and clearly in a line

Explain what does the gear mean to turn? Moto-g Android 5.1. I was holding, not spinning.

In a literal sense, start rotating when you hold it down (the truth may be hard to see under your finger). On Moto X Play, it worked exactly in 5.1.1 and 6.0.1

And how to turn off the percentage of the battery charge all the bodies did not find

So exactly the same as turning on, i.e. everything is the same, but turn off in the System UI Tuner. Provided that you do not have any special firmware, where there is no possibility of turning off.

After disabling the System UI Tuner, the percentage of charge is still not displayed, Android 7.1.1 help to solve the problem

on a Samsung Galaxy tab 2 (Android 4.2.2), this function is turned on differently: you need to go to settings. display. show the percentage of charging and put a tick

My gear does not spin, but in the application it says that it is successful, but the percentage does not show, help (Samsung Galaxy j5 2016)

On Xiaomi Mi 2 Lite it does not work. Fucking bare Android you can’t even change the back buttons

On bare Android 8 and 9 works.
Works on Moto C 4G too (Android 7).

I have a tablet megaphone login 3t, the gear does not spin, I can not set the percentage of charge, how to be.

I have a megaphone login 3t on my tablet, this gear does not spin, how to make it show the percentage of charge on the display.

I have a tablet megaphone login 3t gear does not spin I can not set the percentage of charge, what to do.

Hello!
It does not work for me!
Android version 5.1
And does not work
What to do.

Thank. Your site has the most complete and detailed answer. After the update, the battery level is no longer displayed. Solution helped me. Settings. Notifications. Status bar.

thanks for the help!
I have a Samsung note 10, so that the battery charge is displayed as a percentage, you need to go through the “status bar” and enable this function. She herself would never have guessed to look there. Here is a clear step-by-step instruction in pictures.
Thanks again!

A very intelligible instruction, the whole process of restoring the “visibility” of the battery charge percentage took several seconds. Thank you so much!

On an excellent day, I was looking, I could not find it, but here everything is so simple that not much they posted this function. thanks for the help

Thank you, the battery level now shows as a percentage, Android 7.1, through the system ui tuner did

Is it possible to display the charge level on the main screen

As it becomes clear from the previous sections, you can display information about the battery charge on the main screen only in iPhones up to version 8 inclusive. In newer flagships. In the corners of the screen of all these models, thanks to the efforts of the developers, there was simply no room left. In their opinion, the animated icon is more than enough. However, not all users agree with them.

The company received a wave of criticism for this small change. Now you have to make a few additional clicks, which also consume the battery, the state of which is obsessively monitored by iPhone users.

Owners of new models can breathe more freely. Apple has increased the battery capacity, so that it lasts even with active use. Numerous tests do not give unambiguous data, because everything is very individual. Session duration is influenced by frequency of use and specific applications. iPhone X and iPhone XS are able to maintain battery performance for a long time, even after several hundred charge cycles.

The most stable is the iPhone 10. Thanks to the dual battery configuration, the smartphone has the longest battery life. According to tests, it allows you to listen to music on the Internet for 60 hours and actively surf for at least 12 hours. If you use your smartphone for voice calls, the battery lasts for 21 hours. In this case, the device is charged by half in less than half an hour. Provided that at this time you are not using the Internet.

Enabling battery percentage display on pure Android 9

In the latest versions of Android, you can enable the display of the battery percentage in the status bar using a simple setting (if you do not have one, use the methods from the following sections). Steps to enable:

  • Go to Settings and click on “Battery”.
  • Turn on the item “Battery level”.

These are all the necessary actions. the necessary information should immediately appear at the top of the screen of your smartphone.

Adding a battery icon to the taskbar in Windows 10

Go to Start Settings Personalization Taskbar and then scroll down to the notification area. Go to Select the icons displayed on the taskbar and turn the Power switch to the On position. (Note: The Power switch does not appear on systems such as a desktop computer that are not running on battery power.) If the battery icon still does not appear, select the Show hidden icons on the taskbar check box, and then select the battery icon.

If on a battery-powered device, when you go to Start Settings Personalization Taskbar, the Power switch is grayed out or does not appear, type device manager in the search box on the taskbar, and then select Device Manager from the list of results. Under Batteries, right-click your device’s battery, select Disable, and then click Yes. Wait a few seconds, right-click the battery and select Enable. Then restart your device.

If in Start Settings Personalization Control Panel you have turned on the Power switch but the battery icon does not appear on the taskbar, type task manager in the search box on the taskbar, and then select Task Manager from the list of results. On the Processes tab, in the Name column, right-click Explorer and select Restart.

Reinstalling the battery driver

The battery driver in Windows 10 is usually installed automatically. Sometimes failures in its work provoke the occurrence of various problems, including problems with the display of the “Power” icon. You will not be able to check the correct functioning of the drivers, so you have to reinstall them, but you can do it like this:

    Log into the OS as an administrator to perform further manipulations. Detailed instructions for using this profile can be found in a separate material at the following link.

details:
We use the “Administrator” account in Windows
Managing account rights in Windows 10

Right click on “Start” and select “Device Manager”.

Select “Microsoft AC Adapter”, click on the RMB and select “Remove device”.

Now update the configuration via the Action menu.

Select the second line in the Batteries section and follow the same steps above. (Remember to update config after uninstall).

READ  How to put clock on Samsung home screen
  • It remains only to restart the computer to make sure that the updated drivers are working correctly.
  • Battery Calibration Apps for Android

    If manual calibration does not fix the problem, use the Battery Calibration app.

    • Install Battery Calibration.
    • Charge the device to 100%.
    • Run the application and click the “Calibration” button.
    • Unplug the charger.
    • Let your smartphone drain completely.

    After calibration in Battery Calibration, it is recommended to wait for a full discharge and always charge to 100%. Otherwise, incorrect data will be displayed again.

    Manual for phones with Samsung Experience and One UI shells

    Note that until 2021, Samsung’s branded shell was called Samsung Experience (for example, the popular budget phone J7 works on it). Later models began to appear on One UI. In general, this includes many smartphones of the A-series: A10, A30, A40, A50, A51, A71 and S-series: S8 / S8, S9 / S9 / Note9, S10 / S10, S20 and others.

    First, you need to start by opening the Settings app. This can be done by tapping the corresponding icon on the home screen.

    In the “Settings” select the “Notifications” section. Blocking, permission, adding to priority “.

    This section contains a set of options. Find among them the “Status bar” and click on this item with the mouse.

    A menu will open in which you will see “Show charge percentage”. To activate this option, just slide the slider to the right.

    display, charge, percentage, samsung, screen

    Now, if you look at the top panel of your phone, which is the status bar, you will see that percentage is displayed next to the charge indicator.

    If you see only the battery icon on the phone screen (say, Galaxy S9 or S9), then you can enable charging percentages on Samsung like this:

    • swipe down on the home screen to open the notification shade;
    • on the open notification curtain, find the settings icon. It is drawn in the form of a gear. Tap on this gear;
    • Scroll down the settings menu and find the Battery section. It can be located under the “Notifications” section (it all depends on the firmware version that is installed on your Samsung);
    • find and select “Show battery level in percent”;
    • set the switch next to this item to the “On” position.

    As you can see, just a few simple steps, and you were able to put the charging percentages on Samsung.

    Battery charge percentage on Android 6, 7 and 8

    This method appeared in Android 6 and was available in several subsequent versions. The method consists in using the hidden functions of the Android operating system. To access these functions, you need to open the top curtain, press the gear-shaped button (the button to open Android settings) and hold this button for about 5 seconds. Then the button must be released.

    If everything was done correctly, then after that Android settings should open in front of you. In this case, a message should appear at the bottom of the screen stating that the “System UI Tuner” function has been added to the settings menu. If such a message appears, then you did everything right, if not, then try again.

    If the message appears, then now you need to scroll through the Android settings to the very end and open the “System UI Tuner” section, which should appear there.

    After opening the “System UI Tuner” section, a warning will appear stating that this is an experimental feature and may not work in future versions of Android. Click “OK” to continue.

    Then go to the section “Status bar”.

    And we find the “Battery” function. By default, this function works in the “Show percentage while charging” mode.

    Click on the “Battery” function and change the mode of its operation to “Always show the percentage of battery charge”.

    After that, inside the battery icon, which is displayed in the status bar, a number will appear, which indicates the percentage of the battery charge. The disadvantage of this method is that the number is displayed in very small print and can be difficult to read.

    Saving battery on Samsung

    Now that we have set the charging percentages on the smartphone, we can know when we should start conserving battery more carefully. Since its level is reduced to a minimum. A useful utility has been developed for mobile devices of this brand. Samsung Max. You can download it in the Play Market using this link.

    • Manage your applications;
    • Store data of applications that are installed in the smartphone;
    • Check the file system of your mobile phone for viruses and bugs that track your actions;
    • Fully controls the charge consumed by applications. For the most demanding applications, you can limit traffic if applicable;
    • The user will receive the most accurate graph with the consumption of Internet traffic by applications on Samsung;
    • Turn on “Incognito” mode in apps to prevent ad platforms from tracking your actions.

    All this and not only you get by installing on your Samsung Max phone.

    Advantages of the application: Disadvantages of the application:
    You can enable the function of percentage indication, save traffic and limit it both for a smartphone and for a separate application. The app is not intended for tablets (no horizontal screen orientation).
    You can set the traffic limit for different periods of time. It consumes a lot of RAM (up to 200 MB). But their developers promise to eliminate soon.

    How to enable charging percentages on Samsung

    By purchasing a brand new smartphone, we are forced to customize it to fit our needs and preferences. Since the default settings are not always acceptable. It is important not only to change the desktop, but also to change some of the system parameters. In this article, you will read about how to put charging percentages on your Samsung smartphone.

    How to display charging percentages in Samsung

    This representation of the remaining battery power does not make it clear how many hours we can still use the device. This is especially important to know when the rate is low. Most users are not yet familiar with the Android system.

    We have prepared a simple instruction for them:

      Select the settings icon on the main screen;

    On the same settings window, you can change how notifications are displayed on Samsung.

    After changing these parameters, the window can be closed.

    Way to set charging percentages on Samsung S7

    As we said, different Samsung models may have different ways to change charging settings. For owners of Samsung S7 and S8 mobile phones, the process of displaying the charge level as a percentage is the same.

    • Go to phone settings again. To do this, open the quick access menu (swipe the Android shutter);
    • Select the gear button;

    Immediately after activating this option, at the top of the screen, you will be able to see the battery percentage of your Samsung phone.

    Panel with indicators on Samsung smartphones

    There are always a few small icons or indicators displayed at the top of our Samsung smartphones. The inclusion of any technology. Wi-Fi, Bluetooth, Data transmission. is accompanied by the appearance of the corresponding icon. It also displays a charge indicator.

    READ  How to turn off sound on Samsung

    Most Android mobile phones have the ability to customize the appearance of this indicator. We can make it so that only the small battery is displayed. Or make it so that the display of the remaining battery charge is presented as a percentage.

    What to do if you don’t receive charging percentage notifications on your Samsung Galaxy S10 lock screen

    In the new models of the popular Samsung brand, developers continue to make mistakes. For Galaxy S10, no battery notification appears on the locked screen. They should notify us about receiving letters by E-mail or in social networks. This issue can be resolved with the third-party Always on Edge Lighting application.

    It contains a large number of settings related to mobile device notifications. And also backlit. You can also put the display of charge percentages on your Samsung through the program. And turn on the backlight of indicators when receiving notifications.

    Way to set charging percentages on Samsung S7

    As we said, different Samsung models may have different ways to change charging settings. For owners of Samsung S7 and S8 mobile phones, the process of displaying the charge level as a percentage is the same.

    • Go to phone settings again. To do this, open the quick access menu (swipe the Android shutter);
    • Select the gear button;

    Immediately after activating this option, at the top of the screen, you will be able to see the battery percentage of your Samsung phone.

    Panel with indicators on Samsung smartphones

    There are always a few small icons or indicators displayed at the top of our Samsung smartphones. The inclusion of any technology. Wi-Fi, Bluetooth, Data transmission. is accompanied by the appearance of the corresponding icon. It also displays a charge indicator.

    Most Android mobile phones have the ability to customize the appearance of this indicator. We can make it so that only the small battery is displayed. Or make it so that the display of the remaining battery charge is presented as a percentage.

    How To Turn On Battery Percentage Samsung S10e S10 S10! 3 8 2019

    How to display charging percentages in Samsung

    This representation of the remaining battery power does not make it clear how many hours we can still use the device. This is especially important to know when the rate is low. Most users are not yet familiar with the Android system.

    We have prepared a simple instruction for them:

      Select the settings icon on the main screen;

    On the same settings window, you can change how notifications are displayed on Samsung.

    After changing these parameters, the window can be closed.

    Saving battery on Samsung

    Now that we have set the charging percentages on the smartphone, we can know when we should start conserving battery more carefully. Since its level is reduced to a minimum. A useful utility has been developed for mobile devices of this brand. Samsung Max. You can download it in the Play Market using this link.

    • Manage your applications;
    • Store data of applications that are installed in the smartphone;
    • Check the file system of your mobile phone for viruses and bugs that track your actions;
    • Fully controls the charge consumed by applications. For the most demanding applications, you can limit traffic if applicable;
    • The user will receive the most accurate graph with the consumption of Internet traffic by applications on Samsung;
    • Turn on “Incognito” mode in apps to prevent ad platforms from tracking your actions.

    All this and not only you get by installing on your Samsung Max phone.

    Advantages of the application: Disadvantages of the application:
    You can enable the function of percentage indication, save traffic and limit it both for a smartphone and for a separate application. The app is not intended for tablets (no horizontal screen orientation).
    You can set the traffic limit for different periods of time. It consumes a lot of RAM (up to 200 MB). But their developers promise to eliminate soon.

    What to do if you don’t receive charging percentage notifications on your Samsung Galaxy S10 lock screen

    In the new models of the popular Samsung brand, developers continue to make mistakes. For Galaxy S10, no battery notification appears on the locked screen. They should notify us about receiving letters by E-mail or in social networks. This issue can be resolved with the third-party Always on Edge Lighting application.

    It contains a large number of settings related to mobile device notifications. And also backlit. You can also put the display of charge percentages on your Samsung through the program. And turn on the backlight of indicators when receiving notifications.

    How to enable charging percentages on Samsung?

    Almost all Android smartphones do not use the percentage of charge by default. Why? Apparently, this has something to do with Google’s Android policy (the operating system belongs to the world’s largest search giant). Or maybe it’s something else. In any case, the user needs to set the percentages on his own. How to do it if you have a Samsung smartphone?

    By the way, this is how the charging icon without interest looks like:

    The manual is suitable for smartphones based on One UI: A10, A30, A50, S10, etc. Open the Settings app

    Toggle the “Show charge percentage” switch to the “On” position.

    The item “Show charge percentage” is disabled. Turn it on by pressing the switch.

    display, charge, percentage, samsung, screen

    We look at the status bar, see the charge level as a percentage and rejoice.

    Instructions in case nothing works. Open the settings section, look at the top of the window. here you will see the search bar.

    Click on it and indicate the search word “percentage” (indicate without quotes). And the desired menu item is immediately displayed.

    It remains only to click on it and enable the function.

    Friends! If our site helped you or you just liked it, you can help us develop and move on. To do this, you can:

    • Subscribe to our YouTube channel.
    • Subscribe to our group.

    4 free alternatives to Daemon Tools

    Daemon Tools remains the most famous tool for working with virtual disks. Simply put, if you have an ISO, VHD, FLAC or others

    How to automate batch printing of files. Print Conductor

    Having taken up the topic of printing, I could not pass by the most difficult task in this segment. the automation of printing large volumes of documents. Yes, in

    LazPaint is an open source raster graphics editor for Windows, macOS and Linux

    LazPaint is an open source raster graphics editor that is available on multiple platforms (Windows, macOS, and Linux). I would not…

    How to fix Windows 10 search errors

    Microsoft recently released a new application for the Windows 10 operating system that helps administrators troubleshoot Windows errors

    NNCXV.INFO 2021