How to dry the speaker on iPhone

Table of Contents

First aid: what you can do yourself

As soon as the iPhone is dropped and water gets into it. immediately use the following recommendations.

  • Remove the device quickly from water or snow, try to prevent problems.
  • Wipe the device with a dry soft cloth from all sides: there should be no excess moisture on the case.
  • Turn off your iPhone to avoid additional problems: it should not be powered by the battery with flooded chips and contacts.
  • Take out the SIM card: it can be badly damaged by water, the only way out is to replace it.
  • If possible, gently wipe off moisture from the outside of the earpiece. This also applies to the cable and headphone jack (in older models).
  • If you see drops of liquid in small connectors, gently tilt the iPhone in the direction of flow. Do not shake vigorously as the liquid may spread throughout the device.

speaker, iphone

If the iPhone falls into water, and after that the speaker does not work for a long time, immediately contact a service center to a good technician.

See here the correct methods for drying an iPhone after falling into water.

There are situations when a smartphone suffers from moisture after a short time at a shallow depth (for example, fell into a puddle). and the speaker starts working after a couple of hours. There are fewer reasons for concern. If there is still no sound, do not postpone a visit to the workshop.

Second option

This method is called budgetary. A cotton pad is required for the cleaning procedure. You will need:

  • Divide a disk into several parts.
  • Soak one piece in an alcohol solution and wrap a cotton swab around the plug from the headphones.
  • Insert the plug inside and clean it in a circular motion until the cotton wool turns white. It is logical that it will need to be changed several times.

As you can see, there is nothing complicated. Now it is clear how you can clean the nest from contamination without contacting specialists.

Water got into the headphone jack: what to do

Published by kachlife on 10/29/2020 10/29/2020

If water gets into the headphone jack, the phone may indicate that there are device data in it, when in fact they are not. In this case, the sound may disappear and practically nothing will be heard. The player may not play sound without them.

Transfer apps and other data from Android to iPhone

Ways to clean the headphone jack on your phone

There are two ways to clean and repair the headphone jack.

App for pushing water out of iPhone speakers

The Sonic application can help, which allows you to generate sound waves of different frequencies. Users have found that at 165 Hz, the iPhone itself will literally spit water out of the speaker. The application is convenient and also free. Just download the Sonic app from this link. Open the app and set the frequency to 165 Hz (± 2 Hz) by sliding your finger up and down the screen, then press the big Play button at the bottom of the screen. You will hear a characteristic sound (of the selected frequency), which will begin to push water out of the iPhone speakers.

But you can do even easier in such a situation, without installing additional third-party utilities.

Water got into iPhone speaker, how to dry quickly (push out the water): 2 ways

Moisture trapped in iPhone can be a serious problem. Apple does not consider this case under warranty. First of all, you need to dry the smartphone’s motherboard so that no rust or oxides appear on it. In an attempt to save the device, users have resorted to different methods, sometimes even exotic. Some place the apparatus in a bowl of rice, while others carefully treat the damaged areas with a cotton swab dipped in alcohol. Nevertheless, there are also technological ways to help the device.

Moisture can also damage the speaker of the device. When liquid gets there, it changes the sound to a muffled one. Water must be pushed out somehow.

Siri command to push water out of iPhone speakers

One of the developers created a special Water Eject command for Siri quick commands. Thanks to it, water can also be pushed out of the speaker. As a basis, the same audio frequency was taken, which is used for similar purposes in the Apple Watch. There, sticks dipped in alcohol are unlikely to help get to the speakers.

Here’s how it works with Apple’s smartwatch:

After downloading, the Water Eject command will be saved in the Commands app for iOS, which will also require pre-installation. Siri will respond to the message and make the smartphone speaker make the necessary sounds. They will push water out of the speaker. If you look closely at the smartphone at this moment, you can see microscopic droplets flying off the device.

Follow the link to download the command and click the Get quick command button.

In the pop-up that appears, select Open.

In the Commands program that opens, click on the Get quick command button, after which the Water Eject command will be saved.

Click on the Water Eject command card that appears to launch it.

In the window that appears, click Run Quick Command and then Begin Water Ejection.

You will hear a sound at 165 Hz, which will begin to push water out of the iPhone speakers.

You can doubt this method, but at least it is definitely safe. Working with sound waves of this frequency will not affect either the speaker itself or other components of the smartphone. Apple even endorsed this method, announcing it a couple of years ago in one of its presentations.

When using the Water Reject command, disconnect the headphones from your iPhone.

How to turn on sound on iPhone during a call?

The Ring / Silent switch is on the left of the iPhone. Change ringtones, sounds, and vibration

  • On iPhone 7 and later, go to Settings> Sounds, Tactile Cues.
  • Select the option you want, for example “Ringtone” or “New mail”.
  • Tap the selected alert sound.

What to do if the iPhone says that it is wearing headphones?

If you do not have headphones with you to check, then unlock the screen and press the volume buttons on the side of the iPhone, while the volume indicator should be in the Call mode. If, when the headphones are disconnected from the jack, as a result of pressing the volume buttons, the indicator displays the mode. Headphones, then this is a failure or malfunction.

What to do if speaker is not working on iPhone?

If the speaker on the iPhone does not work or there is no sound in the headphones, contact the PlanetiPhone service.

  • IPhone 4S charging connector replacement 30 minutes
  • Replacing the hearing speaker iPhone 430 minutes
  • IPhone 4 speaker replacement 15 minutes
  • Replacing the microphone 1190 rub.
  • Replacing the audio codec

What to do if the phone shows that headphones are connected?

If your phone, smartphone on Android or iPhone shows that headphones are connected, but they are not there, you need to:

  • Clean the connector from ordinary dirt with a thin cotton swab. Attention. do not do this with a needle, so as not to damage the contacts;
  • Clean the nest from oxidation using the same cotton swab and alcohol.

How to increase the speaker volume on iPhone?

  • Go to the Library section, Preferences tab. In the com. Apple. celestial.
  • The plist document is then edited. There you will see the name of the regions and the value of the sound. For example, it could be 83%. You need to set 100% (number 1).
  • Reboot your device. After that, the smartphone should give out sound at full strength.

What to do if iPhone shows that headphones are connected?

There may be several reasons why the iPhone thinks that the headphones are connected: The headphones were disconnected at the moment when some internal system operations were taking place; Using a headset or headphones of poor quality, which adversely affects the operation of the device as a whole; 3.5mm jack defect.

How to Exit Headphone Mode in iPhone?

How to turn off headphone mode on iPhone?

  • Reboot the device (in all incomprehensible cases I do this);
  • Mechanical damage to the socket or blockage. Inspect and clean with alcohol;
  • Turn on and off the speakerphone;
  • Press the volume buttons.
READ  How to find out the battery capacity of your iPhone

How to Exit Headphone Mode in iPhone?

How to turn off headphone mode on iPhone?

  • Reboot the device (in all incomprehensible cases I do this);
  • Mechanical damage to the socket or blockage. Inspect and clean with alcohol;
  • Turn on and off the speakerphone;
  • Press the volume buttons.

How to increase the volume of the earpiece?

To increase the volume of an Android smartphone, you need to dial the command ### (in some individual phone models it may be different. use Google). In the opened engineering menu, you need to scroll through the top menu, then go to the Hardware Testing section, and then to Audio.

What to do if the speaker does not work after water?

  • Leave the gadget on a windowsill in sunlight or near a battery.
  • Wrap tightly with a towel.
  • Place the phone in a jar of rice and let it lie down.
  • Dry with a hairdryer, but very carefully so as not to overheat the smartphone.

How to increase the speaker volume on iPhone?

Go to Settings → Music → Equalizer and select the Late Night preset. The iPhone sound will then change and become louder. Depending on the smartphone model, this can be a gain of 5-10%.

What to do if speaker is not working on iPhone?

If the speaker on the iPhone does not work or there is no sound in the headphones, contact the PlanetiPhone service.

  • IPhone 4S charging connector replacement 30 minutes
  • Replacing the hearing speaker iPhone 430 minutes
  • IPhone 4 speaker replacement 15 minutes
  • Replacing the microphone 1190 rub.
  • Replacing the audio codec

Clean the headphone jack.

The iPhone thinks the headphones are plugged in when it detects something in the headphone jack. This should only happen if the headphones are actually plugged in, but it’s technically possible that something else in the jack could make the phone think it’s headphones. Lint or other debris may be caught in the headphone jack and make the iPhone think there is something in it. Here’s how to check and what to do:

You may want to use an unfolded paperclip to clear debris from the headphone jack; the paperclip is the right size and allows you to apply some force, but better leave this as a last resort. You probably won’t do any damage to your iPhone with a paper clip, but scraping metal objects around the inside of your phone certainly has the potential for damage. If you decide to use this method, proceed with caution.

Removal of contamination

Pay attention to the headphone jack: over time, dirt, dust, pieces of clothing can get stuck there, etc. If you see that this jack needs cleaning, you will need to get a toothpick and a can of compressed air.

Use a toothpick to gently remove coarse dirt. Small particles will be perfectly blown out by a can: for this you need to put its nose into the connector and blow it out for 20-30 seconds.

If you don’t have a can of air at hand, take a cocktail tube that fits into the connector in diameter. Install one end of the tube into the connector, and start drawing in air with the other (you should do it carefully so that the debris does not enter the respiratory tract).

Check for water ingress.

If cleaning the headphone jack didn’t work, you may have another problem with your phone. Water or other liquid may have gotten inside. In this case, the headphone jack is where the liquid contact indicator is on many iPhone models. On later models, it is located on the SIM card slot.

For details on where the Liquid Contact Indicator is located on each iPhone model, visit Apple Support.

If you see an orange dot indicating water ingress, you will need repairs to get your iPhone out of headphone mode. You can also try to protect your phone from water ingress.

Failure of the firmware

A radical way to fix a software malfunction is to completely reinstall the firmware on your smartphone. To do this, you need a computer with iTunes installed.

    Connect iPhone to computer with original USB cable and then launch iTunes. Next, you need to enter the phone into DFU. a special emergency mode through which the device will be flashed.

If you did everything correctly, iTunes will detect the connected phone, but the only function that will be available to you is restore. It is this process that needs to be started. Next, the program will start downloading the current firmware version for your iPhone version from Apple servers, after which it will proceed to uninstall the old iOS and install the new one.

Wait until the process is complete. the welcome window on the iPhone screen will tell you about this. Then it remains only to perform the initial configuration and recover from the backup.

Headphone connection error

iPhone may think that a headset is connected to it, even if it is not. The following actions can help:

  • Plug in your headphones, then turn off your iPhone completely.
  • Turn on the device. As soon as the download is complete, press the volume key. the message “Headphones” should be displayed.

Disconnect the headset from the phone, and then press the same volume key again. If the message “Calling” is then displayed on the screen, the problem can be considered solved.

Also, oddly enough, an alarm clock can help eliminate the headset connection error, since the sound should in any case be played through the speakers, regardless of whether the headset is connected or not.

    Open the Clock application on your phone, and then go to the Alarm tab. In the upper right corner, select the plus sign.

Set the next time for the call, for example, so that the alarm goes off after two minutes, and then save the changes.

When the alarm starts playing, turn it off, and then check if the “Headphones” mode is turned off.

Why doesn’t the “Headphones” mode turn off?

Below we will look at a list of the main reasons that can affect what the phone thinks as if it has a headset connected to it.

Smartphone malfunction

First of all, you should think about the system crash on the iPhone. You can fix it quickly and easily. reboot.

Check your audio output settings.

In recent iOS, you can control where audio is played: headphones, iPhone speakers, HomePod, other external speakers, etc. The headphone mode issue may be related to audio output settings.

To check this:

  • Open the Control Center. On most iPhones, this can be done by swiping up from the bottom of the screen. On iPhone X, XS, XS Max, and XR, swipe down from the top-right corner.
  • The further process depends on which version of iOS you are using. In iOS 10, swipe from right to left to open the music control. On iOS 11 and up, tap the music control in the upper right corner.
  • In iOS 10, tap the sound control at the bottom of the bar. On iOS 11 and up, tap the AirPlay icon, represented by three rings with a triangle.
  • From the menu that appears, if an iPhone is available, tap it to send audio to the phone’s built-in speakers.

How to clean the speaker on iPhone 6? The easy way

iPhone 6. is a problematic smartphone in terms of sound. Users often complain about poor sound. Such messages are usually teeming with various forums. Sometimes it is enough to simply blow through the speaker, and sometimes a weak sound is the result of a software flaw and is eliminated by software. But more often than not, the speaker needs to either be cleaned or replaced. Therefore, it is important to know how to clean the speaker on iPhone 6. This may well return your smartphone to its previous high-quality sound.

How to clean the speaker on iPhone 6? Instructions

Pour gasoline into a small container. You need to pour just a little. The main thing is that the brush can be dipped in gasoline and moistened, no more. Do not allow gasoline to drip from the brush.

We moisten the brush and very carefully process the speaker mesh. You don’t need to disassemble the phone and take out the net. Simply moisten the assembled mesh of your phone with a brush. Repeat this procedure several times and very carefully. After the second or third cleaning with a brush, you will visually see that the speaker has become much cleaner.

After that, simply wipe off any remaining gasoline from the speaker grill and from the phone with a tissue. The smartphone should now perform better. Check if the interlocutor can be heard better. If not, then you have to clean the inside. This will require special tools. At the very least, you need a star screwdriver, which only people who repair phones and small electronics have. You also need the skills of disassembling and assembling smartphones, because when you remove the case cover, you can accidentally break the cable. Therefore, if you do not know how to clean the inside of the speaker on the iPhone 6, then it is better not to go inside, but to give the phone for repair.

Although the simplest external cleaning with a stiff brush and an alcohol-based solution usually helps.

What you need to clean?

We only need 2 ingredients or tools:

  • Hard bristle brush. If you find a soft bristled brush, that’s okay. Just trim off the bristles, it will be hard at the base of the bristles. This is perfect for us. You can use a cotton swab, but it is worse in terms of effectiveness.
  • Some liquid with m alcohol. It can be cologne or alcohol itself. Available to use gasoline for lighters (high purity).

All this can be found in almost any home. Prepare a brush and liquid. Let’s say it will be gasoline.

Sound To Remove Water From Phone Speaker ( GUARANTEED )

Reasons for poor sound from the speaker

There may be several reasons. If water spills on the phone, the sound from the speaker is bad. this is a completely logical consequence. Also, the speaker could get clogged with dust, and even worse. sand. Therefore, remember if the device fell out on the sand on some beach.

It is worth noting that iPhones have a special metal mesh above the speaker. It serves as protection, but during operation it naturally clogs up.

Rarely does the software cause it. There are reports on the forums that the quiet sound issue has been resolved after a software update. So to get started, just try installing more recent software, or, if you don’t already have one, roll back to your previous iOS. If that doesn’t help, then here’s an article on how to clean your iPhone 6 speaker. Try to follow the tips.

READ  iPhone does not turn on the apple is on and goes out

How not to clean?

Some users don’t know how to clean the speaker on iPhone 6 and try to do it with a toothbrush, but they don’t need to. The toothbrush is very hard and has long fibers, so it can damage the mesh, which can later clog the speaker itself.

It is also advisable to use alcoholic solutions rather than the alcohol itself. Although the latter is also fine. But never use water. Water is oxidizable and is not a degreasing agent. Alcohol and alcohol-based solutions degrease the surface and resist oxidation, making it ideal for cleaning.

Alternatively, you can safely use disposable alcohol wipes, which are usually intended for hands. But be careful not to leave a piece of cloth on the speaker grill. Also, do not use alcohol-free wipes, because most wet wipes now do not contain alcohol, although they also degrease the surface a little. Some users try to do this with a toothpick. Do not use it to clean smartphones, no matter how. You can’t use a toothpick to clean your iPhone 6 speaker at home. You will simply break the mesh, which is not strong anyway.

Now you know how to clean the speaker on iPhone 6 S and other models.

Place iPhone in a bowl

This trick has been around for many years. Just place your iPhone in a bowl with the speaker facing down. Sound waves will bounce off the bottom and sides of the selected cookware, thereby increasing the volume.

How to dry the speaker on iPhone

Sound on iPhone models from 2g to iPhone X and 8 plus is extracted from two speakers. Consider them.

One is used for conversation, and is at the top of the screen. Through the narrow horizontal opening of the display glass and the mesh, sound passes from the internal speaker, which in turn is screwed to the display and pressed to the contacts of the cable, on which, in addition to the speaker, there are a front camera and light sensors to adjust the brightness of the display.

This speaker. so called speaker, mainly used only for mobile phone conversation like standard GSM. as well as for Internet calls via viber whatsapp skype programs, etc.

The second speaker is used for speakerphone and loud reproduction of sounds and music. It is much larger and stronger in power. It is located near the charging socket on the right side, and is also covered with a protective mesh. which protects the speaker from dust, debris, sand and liquid.

The iPhone 7 and 7 plus has an innovation. stereo sound for music and video playback. And everyone wondered if the engineers had created an iPhone with three speakers, or the iPhone had two speakers left, and the speaker became louder and more versatile.?

The answer is number two. stereo sound is extracted from two speakers: the lower and upper speaker-a.

In general, we have already figured out how many speakers and where they are on the iPhone. It remains to disassemble the types of their breakdowns and repair options.

The simplest thing is that the sound of the speaker in the iPhone has become quiet. Such a breakdown usually manifests itself if any kind of liquid gets into the speaker hole and the protective mesh located there. The sticky and viscous liquid immediately clogs the holes and holes in the mesh. thus closing the passage for sound, and possibly nailing the speaker membrane.

You can try to quickly repair such a breakdown at home without disassembling the iPhone by dropping a drop of alcohol or any other non-aggressive degreaser on the mesh and brushing it with a toothbrush.

This option saves with a probability of 70%, but it happens that you still have to disassemble the phone and change both the mesh and the speaker.

If the sound has disappeared completely from the earpiece, you need to make sure that the iPhone has not switched to headset mode. To do this, when you call, you need to press the volume button and see the message that appears on the iPhone screen. If the inscription “headphones” appears under the volume scale. this indicates that the speaker is simply turned off by the system, and the iPhone thinks that headphones or a headset are connected to it.

Repair of such a breakdown is solved either by replacing the lower loop, or by soldering the elements on the board that are responsible for switching the sound modes of the smartphone.

If the earpiece does not work and the sound mode is standard, we try to disassemble the iPhone and change the speaker itself and / or the cable to it.

Few people know that iPhones shipped to Europe through official channels have a factory volume limit. This requirement is primarily due to EU laws, according to which the sound power in headphones cannot exceed 100 dB. According to scientific studies, listening to music at loudness levels above 90 dB can have a truly irreversible effect on hearing. Despite the fact that for most markets Apple does not limit the volume in its smartphones in any way, we still advise you to do it yourself.

Today, almost all playback devices (including iPhones) and headphones are capable of providing very high sound pressure levels, sometimes exceeding all permissible standards. This is especially true for open-type headphones like EarPods or Airpods, where noise isolation is absent as a class. As a result, in a busy place it is easy enough to exceed the limit without even noticing it. Fortunately, the iOS mobile operating system is well placed to manually set the limit. Let’s find out how to do it.

So how to limit the maximum volume of iPhone and iPad?

Get Water Out of Your iPhone’s Speaker [How-To]

  • Launch “Settings” and go to the “Music” section on your device.
  • We find the item “Playback” and go to the “Volume Limit”.
  • Here it will be necessary to set an acceptable volume level for you. To do this, drag the “Maximum volume” slider. The recommended indicator is 70-80% of the total volume.
  • Next, go to “Settings” → “Screen Time” → “Content and Privacy”.
  • In the “Allow changes” section, go to the “Volume limit” menu item.
  • It remains only to check the box opposite the option “No”.

All is ready! In order to return everything as it was, it is enough to set the slider in the menu “Settings” → “Music” → “Volume Limit” to the maximum, before that turning off the corresponding option in the “Screen Time”.

Many have found themselves in a situation when, during a trip, it turns out that they have forgotten the Bluetooth speaker at home. Or, for example, while preparing lunch, the user tries to listen to a podcast, but nothing is heard due to the gurgling of the tap and the hiss of the frying pan. There are many situations where you need to turn up the volume on your iPhone, but there is no way to use a bluetooth speaker or headphones.

How to instantly jump to the first or last photos in the Photos app on iPhone and iPad.

Here are five free and easy ways to make your iPhone a little louder.

Flip iPhone

The speakers on iPhone are at the bottom of the device. To increase the volume, simply turn the device over so that the sound is not drowned out by any surface or object, such as a table top. This will make the sound a little louder and cleaner. With your iPhone propped up, also make sure the speaker is facing up.

Equalizer: add bass (low frequencies) when listening to music on iPhone and iPad.

Roll your palm around the iPhone speaker

This method is good if you hold the iPhone in your hands, for example, to watch YouTube. Just curl your palm in a semicircle near the speaker and sound waves can bounce off your hand towards your ears.

How to make and install a ringtone (ringtone) on any iPhone without a computer right on the device?

Equalizer Late Night Mode

Select Settings → Music → Equalizer and then Late Night Mode. Of all the EQ modes available on the iPhone, this is the loudest. However, if the sound on the iPhone is at its maximum, you may hear slight distortion when operating in this mode.

How to properly shade secret data on screenshots in iPhone so that they cannot be seen.

Make your own iPhone speaker

The bowl trick works great, but you can even better channel the sound waves. All you need is a toilet paper roll or roll of paper towels, a couple of plastic or paper cups, and scissors. Make a slot in the sleeve large enough to fit the iPhone. Then make holes in the sides of each glass and slide them over the grommet.

What could be the reason for the breakdown

Sound problems with spoken (high) and low (polyphonic) speakers are fairly common. The main causes of malfunctions:

  • ingress of moisture due to the fall of the smartphone in the snow or flooding with liquid (tea, coffee, juice, water)
  • mechanical impact (shock, falling on a hard surface), causing damage to internal parts (loop, “ear sensor”, microphone, front camera, etc.)
  • dust and debris on the speaker or headphone jack
  • software malfunctions (especially if you install “left” programs on your phone)
  • volume is poorly adjusted
  • manufacturing defects

Problems can manifest themselves in different ways: it is hard to hear when the interlocutor speaks, the iPhone speaker rattles and wheezes, or stops working altogether.

Speaker stopped working on iPhone

And get the best deals from trusted masters.

  • Compare and choose the best conditions
  • Feedback from interested professionals only
  • Don’t waste time communicating with intermediaries

If your iPhone speaker does not work. it is completely broken or wheezes and rattles during a call. you don’t have to go to the service center right away. First you need to try to find the cause of the problem yourself and fix the malfunction at home.

We fix the malfunction on our own

If you stop hearing the other person or he speaks very softly, start by checking the equalizer settings. First, adjust the volume during a call, making sure the indicator is displayed on the screen. Then make sure that no other devices are connected to the phone jacks. Insert and remove the headphone plug several times. Disable Bluetooth function.

READ  Why files won't open on iPhone

To rule out the possibility of a software problem, you should uninstall new, recently installed software and reset all settings. Algorithm for hard rebooting the device:

  • press the “Home” and “Power” buttons at the same time
  • hold for 10-15 seconds
  • wait for the gadget to restart

If iPhone speaker still does not work (spoken or downstream), restore your system backed up using iTunes. Remember to update iOS to the latest version regularly.

Simple cleaning of hearing and polyphonic speakers from dust often helps. Before performing the procedure, remove the cover and film from the back and front panels, then use a soft bristle brush slightly moistened with alcohol or refined gasoline.

If you suspect a factory defect, immediately take your iPhone to an authorized service center or Apple dealer. they should change the internal parts of your model free of charge. Remember. when installing unlicensed software and careless handling, the warranty conditions are violated. Therefore, if you dropped or flooded your smartphone and damaged the speaker (hearing, voice), do not waste time traveling. It is much easier to call an experienced craftsman at home.

Where to go for help

If you’re having problems with your microphone (bottom left) or speaker (top, spoken), save time and effort by finding a wizard on Yuda performers will find and fix the breakdown as soon as possible if you are faced with the following situations:

  • the speaker does not work well. it became worse to hear the interlocutor during a call after moisture or mechanical damage
  • rattling sound (when communicating through the voice speaker, when turning on the speakerphone)
  • the sound does not wheeze or tremble. it does not exist at all

Each YouDo performer has been working for many years, has extensive experience in diagnosing and repairing iPhones. Other benefits of performers:

  • leave within an hour to any area
  • provide services without days off and holidays
  • use only new and original spare parts (loops, ear sensors, upper and lower speakers, etc.)
  • repair any model, from 3 to 7

Private traders and companies registered on YouDo guarantee the quality of cleaning, soldering and installation of new components. If the speaker on the iPhone does not work (for example, it broke due to mechanical impact), order the service through Yuda. the master will change the spare part within one hour.

The main causes of breakdown

If the speaker on your iPhone has become quiet, you should first examine the ear canal. If dust or dirt is found, it must be carefully cleaned. If cleaning the earpiece does not work, then other causes of the failure should be considered. The most common are the following:

  • mechanical damage. poor sound of the phone may be the result of a shock, falling
  • software crash. very quiet sound or no sound at all is often the result of a firmware failure
  • moisture penetration. after moisture gets inside the smartphone, the printed track, board or other components are damaged, as a result of which the user cannot hear the interlocutor

Before deciding to replace the earpiece or earpiece, diagnose your smartphone and follow the recommendations for self-fixing volume problems.

How to solve the problem with the volume of an Apple smartphone on your own?

If your iPhone speaker is not working well, you can try to fix the problem yourself. It is possible that the earpiece or earpiece itself is working and the reason for the weak ringing on the iPhone is simply eliminated. Follow these steps:

  • check the iPhone volume level. perhaps during a conversation you accidentally pressed the knob and the volume became lower
  • reboot the device. a small software glitch is eliminated by a forced reboot method
  • check the sound of the iPhone without a case. sometimes it is the protective case that dampens the sound during a conversation
  • use a headset. insert the headphones into the jack and pull them out sharply

If none of the above steps helped and the sound of the subwoofer or ring is still weak, call a professional wizard to diagnose the device. The problem may be due to a broken microphone, oxidized contacts, a kinked ribbon cable, or a malfunction of other components.

Speaker on iPhone is not working well

And get the best deals from trusted masters.

  • Compare and choose the best conditions
  • Feedback from interested professionals only
  • Don’t waste time communicating with intermediaries

Some users of Apple smartphones are faced with the fact that the speaker on the iPhone does not work well. during a conversation the interlocutor is almost inaudible, a weak sound when listening to music or watching movies. Most often, the cause of the malfunction is contamination of the protective membrane of the speaker and it can be eliminated by cleaning.

However, there are situations when the cause of poor sound during a conversation is damage to the internal components of the phone, and then cleaning the membrane mesh will not be enough to restore good audibility. To understand why an Apple smartphone has poor sound, you need to take a closer look at all the possible causes of the problem.

Professional smartphone repair

If the sound on the iPhone starts to drop and you are unable to solve the problem on your own, contact the experienced technicians registered on YouDo for help. Private technicians will replace the bottom speaker on any model of Apple device in a short time. The advantages of working with private craftsmen are as follows:

  • inexpensive iPhone repair of any model at home
  • replacement of broken components with original parts
  • departure at a convenient time for you
  • minimum cost of services

As soon as you notice that the sound of the phone has begun to drop and the call on the iPhone is almost inaudible, urgently call a specialist. The wizard will quickly determine why the sound is weak and, if necessary, replace the iPhone speaker with a guarantee for all work performed. Experts know perfectly well why the speaker on the iPhone does not work well, so they deal with the problem in a short time.

The proven way to clean your iPhone speaker

Protective films and glasses, soft rubberized cases and hard shock-resistant bumpers. right after purchase, Apple smartphones are routinely packed into a collection of accessories that can save both from scratches on the screen and back cover, and from dents and chips that appeared after “accidental” falls.

But, as practice shows, even the listed “starting” set of protective measures does not always lead to success. sometimes the front camera “gathers dust”, sometimes the lightning connector is clogged with unknown debris, and in some cases even the sound during voice communication becomes “deaf” and hardly distinguishable.

And the reason for this is the loose film or special “free slots” for some important interfaces (for example, for the speaker). And, if the camera problem is calmly solved by a new film, and Lightning is treated with a toothpick, then in the case of the speaker, the situation is a little more complicated. you will have to clean the speaker on the iPhone.

To the service or at home?

Speaker cleaning is the same process for almost all iPhone versions. The actions are the same for both “4” and “10”, the main thing to remember are a few things: if your hands start shaking at the very thought of having to dig into your favorite smartphone, and panic is already arising in your head, then you definitely should not take action. it will only get worse.

And one more thing. before using the algorithm described below, it is worth choosing the right tool. Toothpicks or toothbrushes will not work. you need a soft brush that is not capable of damaging the membrane or disrupting the “mesh” of the speaker. However, first things first:

  • First of all, you will have to prepare the workplace: turn off your smartphone, take a small plastic container (a bottle cap and a food container lid are also suitable) and drip gasoline or an alcohol-containing liquid (it is undesirable to use high-grade alcohol, in addition, in no case should you apply for help to the water!). If there were no solvents or other liquids at hand that could disinfect the surface, then you can use gasoline from a lighter. The option is proven and working, the main thing is not to overdo it with quantity and observe safety precautions;
  • After preparation, pick up the iPhone, and dip a soft brush specially prepared for cleaning the speaker in gasoline or alcohol-containing liquid solely for the sake of surface moistening (the brush should not “drip”, otherwise there is a real chance to completely “accidentally” fill the connector and aggravate the situation). Before using the brush, it is worth checking three times. whether there really will be no extra drops?
  • With a prepared brush, apply the dynamics 2-3 times. The procedure should be repeated until at least visually there is less dust on the speakers, and the mesh takes on a distinct “gray” or “silver” design. If desired, hold over the rest of the connectors, which have become dusty during operation. Remains of gasoline or alcohol should be removed with a napkin;
  • If after 2-3 attempts even visually the speaker has not become cleaner, then you may have to cut off the upper part of the brush fibers to increase the stiffness of the bristles;
  • As a result of the work done, the speaker should return to its former state. If nothing has changed, and the interlocutors are still not heard, or the words cannot be disassembled even at maximum volume during voice communication, then two options remain. to start disassembling the device or contact the service center. In the first case, there is serious work ahead, which is definitely not worth touching without knowing the case (if you open it incorrectly, the risk of damaging the loop responsible for the operation of the touch screen or the actions of the buttons approaches 100%) and a suitable tool (a screwdriver must be included in the kit) sprocket capable of handling tiny parts).

In some cases, it is worth visiting several services at once to conduct an appropriate independent diagnosis. are the repairmen trying to raise the price or oblige to pay for additional services? Sometimes it is better to be patient, but bring what you started to mind.