How to enable auto-rotate on iPad

Enabling automatic orientation change

The procedure for solving this problem will depend on the model of the “apple” device. Let’s conditionally divide them into groups:

  • Apple tablet mini 4, model Air 2, model Pro and newer.
  • iPad Air, iPad 2-4, iPad mini 1-3.

Unlocking automatic rotation for the first group

If the screen on the iPad, which we conditionally attributed to the first type, does not flip, you need:

  • Open the “Control Center” of the gadget via a bottom-up swipe.
  • Click the arrow and lock icon.

With the lock option disabled, the display orientation will change depending on the position of the device.

Turn on auto-rotate on iPad

Owners of “apple” tablets sometimes encounter small problems during the operation of their devices. One of the frequently asked questions on internet forums is how to enable auto-rotate on iPad.

Disabling blocking on devices of the second group

On such gadgets, the lock can be turned off in two ways:

  • the same as on devices of the first type;
  • using a switch that you can easily find on the side panel (near the volume buttons). If you do not know how to enable screen rotation with this switch, just move it to the opposite position.

There are times when users regularly find the auto-change function turned off due to accidentally hitting the side switch. In such a situation, it is advisable to disable this option. For this you need:

  • Go to the menu “Settings”. “General”.
  • In the “Switch on the side panel” section, select “Mute”.

There are times when the position lock does not work, then you need to try to reboot the device. If this does not help, the problem is most likely in the breakdown of the hardware of the gadget.

How to enable / disable auto-rotate on iPad?

If you went to this article, then you probably have an iPad and you are looking for information that will help you turn on or turn on auto-rotate the screen.

You are just tired of when the screen changes orientation by itself, or you are locked and want to watch a movie in a horizontal version and do not know how.

Today I will tell you about all the aspects of this function, about its settings, and even plunge into memories a little. It will be very useful and interesting.

If you have iOS up to version 6

Maybe someone else caught these versions of iOS when multitasking was invoked by double-clicking the Home button. And a panel appeared at the bottom. Scrolling to the right side, you could find the auto-rotate setting icon on the left side. Click and done, your device no longer changes orientation.

All of this was a very big breakthrough in iOS. Everyone enjoyed using it and, fortunately, I also had this experience of using.

How to flip the screen on iPad?

Well, I’ll start with the fact that the auto-rotate function in modern devices is implemented using a device such as an accelerometer. If in old devices it was something special, then today it is a function that appears immediately in any device and everyone does not even think about it.

Let’s tell you how this is all implemented on the iPad, which have different versions of operating systems.

If you have iOS 7 or higher

With the advent of the seventh version, absolutely everything has changed, both in design and functionality. At first it seemed that everything was done for the worse and the old version was much better.

For today, we just slide our finger across the screen from top to bottom, thereby bringing up the taskbar. We are looking for an icon on the right side, which is implemented in the form of a lock in a circle. We press it, it lights up red or in some other color and this indicates the activation of this function. You can disable it in the same way.

Also, to check whether the function is activated or not, you can look for the same lock in the circle near the battery on the right. This is probably the easiest way to define.

Guide-Apple

How to enable auto-rotate on a tablet?

Auto-rotate the screen is one of those functions that someone really likes, and someone is insanely annoying. Fortunately, the functionality of the tablet allows you to customize it so that the operation of the device is as convenient as possible.

Why sometimes you need to disable auto-rotate screen

Perhaps the main and only reason is a matter of personal convenience. With active Internet surfing, this function makes it easier to view pages, since their format can be sharpened both for vertical and horizontal screens. Automatic rotation will allow you to quickly switch between pages, comfortably studying the information.

But while reading, playing games, watching videos, auto-rotate can only interfere, especially if you are using the tablet lying down. Not understanding what position is required of him, the gyroscope changes the position of the screen, causing annoyance and disrupting the rhythm of work or rest. In this case, it will be appropriate to use the shutdown function.

How to enable and disable auto-rotate on the screen

By default, the auto-rotate screen feature is enabled on all tablets, and if everything suits you, just don’t change anything. Otherwise, follow the instructions by selecting the desired device.

Auto-rotate on iPad. To understand whether this feature is enabled or disabled, just look at the panel on which the battery level is located. If auto-rotate is enabled, the lock icon will be open, if disabled, it will be closed.

To change the state, double-click the “Home” button, bring up the multitasking menu, and select the “Lock auto-rotate” icon. It is located at the bottom left. Rotate the tablet to the position you want and press the button. Everything, after that the screen will freeze until the next reconfiguration.

Auto-rotate on Android. There are several ways here. The easiest and fastest is to call the menu located in the upper right corner of the screen. To do this, just slide your finger from top to bottom. Find “Auto-rotate” among the icons and press, having achieved the desired state.

The second method requires entering the “Settings” menu. There open the “Accessibility” panel, find “Auto-rotate screen” and uncheck (or put) a check mark next to it.

You can also select the “Energy Saving” widget and disable rotation through it.

Auto-rotate on Windows 8. Working with this OS is somewhat more complicated than with the previous ones. Tablets with Windows 8 periodically cause inconvenience to their owners, either by sending upside-down photos, or by unfolding the screen at the wrong moment. If you want to disable this feature, you can use several methods.

  • Charms Bar. The main function of this application is to adjust the sound, but in most Windows firmware there is also an auto-rotate control button. To quickly open the Charms Bar, press Win-I.
  • Personalization. Having entered this section, you need to select “Settings”, find the “Auto-rotate” option and uncheck or check the box in the required line. Unfortunately, this feature only works on some models.
  • Keyboard. The method is simple, but it doesn’t work everywhere. If a keyboard is connected to the tablet, just press the Win-O combination.
  • System registry. One hundred percent way to disable automatic rotation, but the most painstaking one. Follow this path: Run application. regedit command. path HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionAutoR. Next, the editor will open, in the right sector of which select the “Enable” parameter, open its context menu, select the “Modify” option. In the “Valure Data” field that appears, set the parameter to “0”. This will block auto-rotate.

Why Auto-Rotate Screen Doesn’t Work on Tablet

As a rule, failures in settings, sometimes new applications or viruses, lead to problems with auto-rotation. First, check the settings and run the tablet through the antivirus program. If auto-rotate is not enabled manually in the settings and viruses are not detected, you can simply restart the tablet.

But if the problem persists or reappears periodically, it is better to reflash the device to fix the problem at the root.

How to enable auto-rotate on Windows8

The hardest part is with Windows8. Either the photos are sent upside down, the tablet strives to be constantly upside down, then something else. In Windows 8 there is one 100% way how to rotate the screen on a tablet and a few more that do not take place on all versions of Windows 8.

  • Charms Bar;
  • using the keyboard;
  • personalization;
  • system registry.

Keypad lock

This method is the easiest, but it does not work on all models. You need to connect the keyboard and just press the WinO key combination.

How to enable auto-rotate on iPad

By default, the auto-rotate option is enabled on iPad, just like on other models. The evidence that it is locked is a special lock-shaped icon near the battery level. There are two ways to turn screen lock on or off:

  • switch on the side panel;
  • in the multitasking menu.
  • Switch on the side panel. The option is configured in the “Settings” application. Go to the General menu, then select the “Switch on the side panel” item. Then select Mute. What will it give? The switch on the side panel will be responsible for increasing / decreasing the sound, and not for rotating the screen. This is a way for those who want to turn off and not use it at all.
  • Bring up the multitasking menu. To do this, press the HOME button twice. At the very bottom left will be the Auto Rotate Lock icon. Rotate the screen to the orientation you want to leave it in, click on the above button. Everything!

How to enable auto-rotate on a tablet

Auto-rotate on the tablet is a miracle function for some, while other users turn it off immediately. But in order to use all the joys from this option, you need to know how to use it. The function itself is useful, for example, in web browsers, when viewing photos, etc. But sometimes it gets in the way: reading books and magazines, filling out forms.

Blocking via Personalization

Go to Personalization, go to Display Settings. Every third model on Windows has an option to manually change the orientation and a checkbox for automatic orientation.

How to enable auto-rotate on Android

On Android, turning it on or off is easiest. However, users of these particular devices complain that screen rotation does not work. The fact is that some applications, when launched, themselves can change this option. When exiting such an application, it itself does not return to its previous state.

To enable or disable display rotation on the tablet, you need to bring up the taskbar with the top swipe. In “naked” androids (without a wizard), you need to go to the leftmost screen of the panel, where the power button is located.

READ  How to connect hard drive to ipad

How to turn auto-rotate screen on and off on iPhone?

iPhone, like any other modern smartphone, allows you to use vertical or horizontal screen orientation. Why is this needed? For example, to watch a movie it is definitely worth using the horizontal orientation. For reading a book, as a rule, a vertical orientation is used. In general, in life we ​​usually use vertical screen orientation.

By default, any smartphone, including the iPhone, automatically flips the screen when the body is tilted. This can be said to be such a feature. If you want to lock the screen on your iPhone, it’s as easy as shelling pears.

Swipe up on your device to bring up the Control Center. In it you will see a lock icon with an arrow. Click on it.

After that, an arrow icon will appear in the status bar at the top of the screen. It means that screen rotation is currently locked. No matter how you turn your iPhone in your hands, the screen will not flip.

You can do it differently, however, it will take a little more time. Find the Settings app on your desktop and open it.

In the “General” section, check the “Lock orientation”.

In this case, the auto-rotate screen is turned off, that is, the lock is turned on.

As you understand, in order to disable the screen orientation change lock, you must do the indicated in the reverse order. Nothing complicated.

Friends! If our site helped you or you just liked it, you can help us develop and move on. To do this, you can:

  • Subscribe to our YouTube channel.
  • Subscribe to our group.

What is screen rotation on iPhone

IPhone Auto-Rotate is an option that allows you to use vertical or horizontal screen orientation. For example, when watching movies, it is much more convenient to use the horizontal mode. Reading books and browsing social networks is carried out through vertical orientation. By default, the screen will always flip when the smartphone is tilted. This feature is not only for Apple products, but also for other devices.

What the auto-rotate icon looks like on iPhones

The action is based on a device. a gyroscope. With the help of special elements, information about a change in position is transmitted to the working area of ​​the phone. Then a pulse is read and the screen is rotated. If necessary, you can lock the automatic flip and then the screen will be in one position.

The option allows you to rotate the screen 90 and 180 degrees

How to turn screen rotation on or off on iPhone

Screen rotation is a standard feature that works on all smartphones by default. The option is aimed at making the use of technology more convenient, especially when watching movies or working with documents. However, screen rotation on the iPhone is often turned on at the wrong moment, you have to rotate the smartphone several times to return the orientation to portrait mode. To eliminate problems while using the gadget, you need to explore options for enabling and disabling screen rotation.

How to enable auto-rotate on iPhone and iPad

Initially, the screen will rotate automatically from the very first turn on, since the settings are by default. In some programs or games, orientation rotation is not provided, so the picture will always be shown in the same position, regardless of the device settings. This is due to the application code that has been programmed to lock the turn.

Note! In normal cases, turn inhibit must be manually activated. The action of this mode will be indicated by a special icon in the menu bar of the iPhone or iPad.

  • Open the main menu of the device.
  • Raise the curtain with notifications with a swipe up.
  • In the window that opens, find the lock icon and click on it.

As a result, auto-rotate will work again and the screen can be rotated in the required direction.

Modern iPhones have a function in the “General” section that can change the operation of the switch on the side of the gadget. By default, this button is responsible for activating and deactivating the sound. However, it can be set to “Orientation Lock”.

If the switch is in the “Orientation Lock” mode, then you cannot work with auto-rotate through the “Control Center”. In this case, all actions are carried out using the switch.

Setting screen orientation on iPhone

Screen rotation on iPhone needs to be adjusted to suit your personal preference. Not everyone likes the automatic mode, since at the slightest turn of the smartphone, the orientation of the screen changes. For example, reading a book lying on the bed, turning on its side, the smartphone screen will also unfold. It is convenient to use auto-rotate when a person often watches a video. In this case, the orientation quickly changes to horizontal and there is no need to do a series of adjustments every time. If screen rotation is off, the phone will work in one screen mode until the user turns off the function.

Note! Some apps have a separate layout for landscape orientation (mail, calendar, messages, photos).

On iPad devices, the option may work differently depending on the model. For owners of the iPad version lower than the iPad Air, you need to know that the regulation of the function is carried out through the basic settings. There is an item “Use side switch”. This section is responsible for controlling the rotation through the volume buttons. On newer models (iPad Air 2, iPad mini 4), auto-rotate can be configured through the Control Center.

Owners of smartphones version iOS from 4.0-6.0, in order to change the settings, you need to double-click on the “Home” button. As a result, the multitasking panel will appear at the bottom of the screen. Here you need to scroll the menu to the right to the button with the image of a lock and an arrow. With its help, the work of the auto-rotate is regulated.

How to turn off screen rotation on iPhone and iPad

You can make orientation lock in a few seconds through the main control center. The actions will differ slightly depending on the gadget model used.

For new iPads and iPhones, starting with the 10 and XR models, where there is no Home button, shutdown via the Control Center is suitable. You can call it by swiping down on the right side of the screen.

On iPhones S, SE, 7 and 8, you need to swipe up from the bottom to open the control menu

In the menu that opens, find the “Lock” section and click on it. It is located under the group of main settings. After the icon turns red, you can be sure that screen rotation is turned off. To disable the lock, you must repeat these steps again through the control point.

The above steps will help you always use your iPad or iPhone without accidentally rotating in one orientation. The lock allows you to enjoy portrait orientation even while lying on your side, watching YouTube or using a browser.

Note! If necessary, the user can always enable or disable automatic rotation through the standard settings.

Please be aware that the iPhone display cannot be locked in landscape mode. The iPad, on the other hand, can be locked in both landscape and portrait mode.

How to disable auto-rotate on iPhone in the form of detailed instructions:

  • First, you need to unlock your iPhone to open the main menu.
  • Moving from bottom to top brings up a panel with quick access to settings.
  • By clicking on the lock icon, you can enable or disable the rotation, depending on the desired action.

After pressing the lock, the control center will display the message “Vertical orientation off”. Depending on the position of the button, the red background may light up or go out. To check the function, go to any application and turn the smartphone.

Note! If you activate the auto-rotate lock in landscape mode, the background of the display will return to vertical mode.

You can remove the screen rotation through the AssistiveTouch item. This is a common feature that users use to customize buttons for specific actions. AssistiveTouch allows you to flip the orientation in different directions in apps that support this feature.

Note! Turn off the screen rotation lock before using AssistiveTouch.

Go to the settings and open the “Basic” item. All major smartphone options are contained here. Under the Accessibility section, there is an AssistiveTouch that needs to be activated. There is a section “Physiology and motor skills” here. Next to the inscription “AssistiveTouch” should activate the switch. A green slider indicates that the feature is enabled. In addition to the icon, a small gray square will appear on the smartphone screen. Next, you should exit the main settings and open any application. By clicking on the square, a menu with options will open: notifications, device and control point. Here you can activate the action of the mechanical Home button by transferring it to the smartphone screen via the “Home” option.

To open an additional menu with parameters, you must click the “Device” item. Then “Screen Rotation” is selected. As long as the lock is off, you can rotate the phone in any direction. You can click on “Right”. “Left” to switch between orientations. To close the AssistiveTouch menu, tap anywhere on the screen.

Why iPhone auto-rotate screen doesn’t work and how to fix it

Auto rotate will only work when the switch is inactive. If the screen does not rebuild to landscape orientation, then the main reason should be looked for in the settings. Experts recommend immediately checking the “Control Center”, which contains the section “Blocking”.

If the rotation stopped turning on on iPhones of the Plus version, then the possible reason lies in the mode of displaying icons on the home screen. It is necessary to open the item “Settings”. “Brightness and screen”. “View”. There are two main display modes for items: standard and enlarged. The second option displays the icons in an enlarged view, and the rotation function will be disabled. Despite this, the screen will be flipped in all applications. To activate desktop rotation, open the “Standard” tab and click “Install”. The whole process will take a few seconds.

For mechanical reasons, auto-flip may not work due to damage to the gyro. This happens as a result of sharp blows, falls or shaking. The operation of the mechanism gets confused, which leads to partial or complete inoperability.

READ  How to enable face time on iPhone

Note! Damage to the gyroscope must be eliminated by the master, since it is impossible to do this on your own.

Often the reason for the incorrect operation of the iPhone is a failure in the operating system. You can try to save the situation by rebooting your smartphone or doing a full reset. To reboot, you must use the power off button of the device. After the screen turns off, the gadget should be launched after a few minutes and check if auto-rotate works or not.

Factory reset menu on Apple smartphones

Factory reset on iPhone means deleting all personal data on your smartphone, so before starting the process, you should back up your files, save contacts and other important information.

At the time of reset, you need to fully charge your iPhone or connect to power. Next, the settings open, the reset section is at the very bottom here. The device offers several cleaning options: delete settings, content and settings, network data, dictionary and keyboard, get rid of Home button data, and also throw off location warnings.

The most common and effective method is to reset all settings. In this case, the information from the smartphone is not lost. In the section, you must confirm pressing the “Reset all settings” button with a positive answer. The whole procedure will take about 1-2 minutes. After execution, the iPhone will revert to its original settings, but the files and browser bookmarks will remain in place.

Note! Hard reset iPhone is a more radical method that allows you to completely clean your phone.

It is recommended to do a full reset not only to improve the phone’s functions, but also to clear unnecessary information. This is especially important for devices that have been in operation for a long time. After several “Erase iPhone” confirmations, data deletion begins. The smartphone will automatically shut down and restart again. After turning on, you will need activation, during which you must definitely connect to Wi-Fi and iTunes. Next, a message will appear on the screen where you need to select one item. set up a new one or restore from a copy. When restoring, all previous files will be returned, but only if a backup was created earlier. If all else fails, a flashing is done.

IPad Air, iPad 2, iPad (3rd generation), or iPad (4th generation) have a dedicated switch on the right side panel. Depending on the configured settings, this button is responsible for either locking the screen or mute the sound. You can test the rotation of the page orientation using this switch. If it was not possible to turn the page, then you need to change the basic settings.

Auto-rotate the screen is an indispensable feature that every user has used at least once on smartphones or tablets. Manufacturers equip this option with a technique to facilitate the use of gadgets. At any time, using the settings, you can turn orientation flip on or off, thereby adjusting the device to your actions.

What to do if rotation settings are locked

Screen orientation lock on iPad was added only in models with iOS 4.0. In older versions, this should have been jailbroken, but now the need for this procedure has disappeared.

Look for the lock and curved arrow icon on the screen to see if the rotation is locked. A gray color of this icon indicates that the blocking is active.

If, when you change the position of the device in space, the screen on the iPad does not turn over, take a few simple steps to help you turn off the lock:

enable, auto-rotate, ipad
  • go to the “Control Center”
  • touch the lock icon that appears on the screen, thereby deactivating the function

After deactivating the lock, the screen will rotate automatically when you rotate the gadget and turn on programs that support this function.

How does the malfunction manifest itself?

The screen of any Apple tablet model flips when the position of the device changes. If you hold the gadget horizontally, then the display will be in the same position. If you turn the device the other way, the orientation becomes vertical.

enable, auto-rotate, ipad

The orientation on the tablet is recognized by means of a gyroscope. If it stops working, the picture cannot change position and does not spin. Such a malfunction of the gadget can manifest itself gradually:

  • tablet display does not always flip over when changing position
  • for the picture on the screen to start spinning, you need to tilt the tablet several times
  • the device randomly changes the orientation of the image

What can lead to device breakdown?

If the image does not rotate, it is worth finding out the cause of the malfunction. In many cases, it can be quickly fixed. This could be:

  • using programs that do not support auto-rotate
  • disabling the auto-roll switch
  • display rotation lock
  • hardware failure settings
  • gyroscope failure

The device control section includes two screens indicated by dots. The settings you need to unlock auto-rotate are in the first one. The device on which the screen does not unfold should be configured in it when the mode is on.

It is worth remembering that sometimes the orientation does not change in the absence of its support. When starting to repair auto-rotate on iPad, you need to remember that some applications and programs do not support this function, opening only in portrait or landscape mode. To test the rotation of the screen, which has ceased to function normally, you can close all applications and enter the “Settings” item. Place the tablet horizontally. if the screen does not automatically change orientation, the problem may be due to the switch being disabled.

What is required to repair a tablet

It is not recommended to disassemble the iPad with a non-working screen on your own, since all the parts of the gadget are very fragile and any unskilled intervention in the “stuffing” of the tablet can cause its complete failure. Then you will not only be unable to solve the problem with unlocking the orientation, which changes incorrectly, but also break the tablet, which will require an expensive replacement of components to repair.

It is also worth remembering that professional tools are required to disassemble the iPad case to return the flip function. Therefore, it is better to entrust the repair of the gadget, on which the orientation does not change, to a qualified specialist. A professional will quickly and efficiently restore a tablet on which the display has stopped working, and the picture does not spin when the position of the gadget is changed

Most often, the repair of one or another iPad model, on which the display orientation does not change when the device is rotated, takes one to two hours. The term may vary depending on the cause of the problem with the auto-rotate images on the screen.

Hardware failure

The screen may stop flipping when it crashes, for example, due to downloading a low-quality application. The solution to the problem with the rotation function in this case will be to restart the tablet. To do this, press the iPad power button and hold it until the “Power off” button appears on the display. Then turn off and turn on your Apple tablet. You can also flash the device.

If this did not help, go to “Settings”, go to the menu item “General”, then “Accessibility” and select “Physiology and motor skills” with the name AssistiveTouch. Open it and a virtual button will appear on the display. Click on it to activate the function of changing the position of the display, and forcibly change its orientation.

Failure of the gyroscope

As a result of the breakdown of the device underlying the flip technology, the display stops spinning along with the rotation of the device. It is impossible to solve the problem on your own in this case, without special devices and practical skills.

Therefore, if the automatic screen rotation does not work, and the picture does not unfold after all the above steps have been completed, you should think about immediately contacting a qualified technician. He will assess the condition of the iPad, correctly determine the reason why the screen does not unfold, and provide the necessary services to fix the problem.

Procedure for Disconnecting the Switch

If you own an iPad 2, 3 or 4 models, you can solve the problem by changing the position of the special switch. It is located on the right side of the device on the side above the volume keys. Using the switch, you can activate both the screen lock function and the volume change based on the current settings. If the tablet has such a switch, change its current position to the opposite, after which the auto-rotate of the display should work.

To prevent the switch from blocking the flip of the display in the future, reconfigure it to change the ring volume. To do this, follow these steps:

  • go to settings
  • find the section “General” and “Switch on the sidebar”
  • reset the rotate function switch to mute

When optimizing power saving mode

The third method to disable the app is to change the power saving settings. To use it, you need to open the appropriate section of the smartphone settings and click on the “optimization” button. After that, it remains to find the item containing the mention of auto-rotate and switch the slider to the “off” position. But after using this approach, it is important to remember the reasons for disabling the option, so as not to wonder why the option is not available.

Basic phone settings

The next approach also does not differ from the instructions suggested above. To fix the position of the screen and ensure that it stops rotating, just go to the settings menu and move the slider to the “off” position. Finding the desired menu section will not be difficult.

How to enable auto-rotate screen on Huawei and Honor?

If the picture on the display does not rotate, then the application is turned off or needs to be activated. There are 2 main ways to enable an option:

  • via the Android settings menu;
  • through the curtain of notifications by the smartphone.

iPad Won’t Rotate? Here’s The Real Fix!

Both methods are equally successful in obtaining the desired result, so users can safely use any option.

Honor / Huawei smart screen rotation

The choice of the correct position of the images is possible thanks to the accelerometer built into the phone. He is responsible for the orientation of the device in space and makes it possible to use some useful functions, including the one mentioned. Without it, automatic change of the position of the pictures on the display is impossible.

READ  How to enable airfield on iPhone

Notification panel

To disable the application through the notification panel, you will need to completely repeat the procedure described above:

  • pull the curtain down;
  • find among the proposed icons the one that is responsible for managing the function;
  • click on it once;
  • make sure that it has stopped glowing and the function has become inactive.

That is, you can control the option with a couple of taps on the screen.

If you have any questions or complaints. please let us know

Disable auto-rotate

Disabling auto-rotate is no different from activating it. Therefore, people who have already encountered its inclusion will be able to remove the option that has become unnecessary without any problems. over, given the ease of making changes, users will be able to easily regulate the operation of the application, independently choosing when the option should work.

Through settings

The second method will take a little longer because it requires:

  • open the settings menu of your smartphone or tablet;
  • scroll down and select the “screen” section;
  • find the item “auto-rotate” in the section and move the slider next to it to the desired position.

Then it remains to check whether the desired effect has been achieved.

How to enable / disable auto-rotate screen Huawei and Honor

How to set auto-rotate screen on Huawei and Honor. this question should not bother users, since the specified function is installed on smartphones by default. And in cases when it does not work, it is enough to activate the option using the phone’s functionality. over, the developers have provided several ways to enable.

Hardware failure

The screen may stop flipping when it crashes, for example, due to downloading a low-quality application. The solution to the problem with the rotation function in this case will be to restart the tablet. To do this, press the iPad power button and hold it until the “Power off” button appears on the display. Then turn off and turn on your Apple tablet. You can also flash the device.

If this did not help, go to “Settings”, go to the menu item “General”, then “Accessibility” and select “Physiology and motor skills” with the name AssistiveTouch. Open it and a virtual button will appear on the display. Click on it to activate the function of changing the position of the display, and forcibly change its orientation.

What can lead to device breakdown?

If the image does not rotate, it is worth finding out the cause of the malfunction. In many cases, it can be quickly fixed. This could be:

  • using programs that do not support auto-rotate
  • disabling the auto-roll switch
  • display rotation lock
  • hardware failure settings
  • gyroscope failure

The device control section includes two screens indicated by dots. The settings you need to unlock auto-rotate are in the first one. The device on which the screen does not unfold should be configured in it when the mode is on.

It is worth remembering that sometimes the orientation does not change in the absence of its support. When starting to repair auto-rotate on iPad, you need to remember that some applications and programs do not support this function, opening only in portrait or landscape mode. To test the rotation of the screen, which has ceased to function normally, you can close all applications and enter the “Settings” item. Place the tablet horizontally. if the screen does not automatically change orientation, the problem may be due to the switch being disabled.

Screen Orientation Problems on an iPad : Tech Yeah!

What is required to repair a tablet

It is not recommended to disassemble the iPad with a non-working screen on your own, since all the parts of the gadget are very fragile and any unskilled intervention in the “stuffing” of the tablet can cause its complete failure. Then you will not only be unable to solve the problem with unlocking the orientation, which changes incorrectly, but also break the tablet, which will require an expensive replacement of components to repair.

It is also worth remembering that professional tools are required to disassemble the iPad case to return the flip function. Therefore, it is better to entrust the repair of the gadget, on which the orientation does not change, to a qualified specialist. A professional will quickly and efficiently restore a tablet on which the display has stopped working, and the picture does not spin when the position of the gadget is changed

Most often, the repair of one or another iPad model, on which the display orientation does not change when the device is rotated, takes one to two hours. The term may vary depending on the cause of the problem with the auto-rotate images on the screen.

What to do if rotation settings are locked

Screen orientation lock on iPad was added only in models with iOS 4.0. In older versions, this should have been jailbroken, but now the need for this procedure has disappeared.

Look for the lock and curved arrow icon on the screen to see if the rotation is locked. A gray color of this icon indicates that the blocking is active.

If, when you change the position of the device in space, the screen on the iPad does not turn over, take a few simple steps to help you turn off the lock:

  • go to the “Control Center”
  • touch the lock icon that appears on the screen, thereby deactivating the function

After deactivating the lock, the screen will rotate automatically when you rotate the gadget and turn on programs that support this function.

Procedure for Disconnecting the Switch

If you own an iPad 2, 3 or 4 models, you can solve the problem by changing the position of the special switch. It is located on the right side of the device on the side above the volume keys. Using the switch, you can activate both the screen lock function and the volume change based on the current settings. If the tablet has such a switch, change its current position to the opposite, after which the auto-rotate of the display should work.

To prevent the switch from blocking the flip of the display in the future, reconfigure it to change the ring volume. To do this, follow these steps:

  • go to settings
  • find the section “General” and “Switch on the sidebar”
  • reset the rotate function switch to mute

Screen does not flip on iPad

Apple products are of very high quality and reliable, but despite this, tablet owners often face a problem when the screen does not flip on the iPad. As a result, the ability to normally communicate on the Internet, watch videos, read books and play is lost.

Failure of the gyroscope

As a result of the breakdown of the device underlying the flip technology, the display stops spinning along with the rotation of the device. It is impossible to solve the problem on your own in this case, without special devices and practical skills.

Therefore, if the automatic screen rotation does not work, and the picture does not unfold after all the above steps have been completed, you should think about immediately contacting a qualified technician. He will assess the condition of the iPad, correctly determine the reason why the screen does not unfold, and provide the necessary services to fix the problem.

What to do if iPad screen won’t rotate?

By default, the iPad screen rotates when the device’s position is changed. i.e. if you keep it in landscape orientation, then the screen should be in landscape orientation. If the screen of your iPad does not rotate depending on the orientation, then this can be quickly fixed (of course, if the problem is not a hardware one).

What to do if the screen won’t rotate on iPad mini 4, iPad 5 (2017), iPad 6 (2018), iPad 7 (2019), iPad Air 2, iPad Air 3, iPad Pro and later

If you see a small icon in the form of a lock with a round arrow next to the current battery status on the status bar (in the status bar) of the iPad, then the automatic rotation of the iPad screen is blocked.

In order to lock or unlock the automatic screen rotation on the aforementioned iPad models, you need to open the Control Center and use the corresponding button.

When the rotation lock is enabled, the portrait or landscape orientation of the screen will be preserved and will not change when the device is rotated.

What to do if the screen won’t rotate on iPad Air, iPad 2, iPad 3, iPad 4, iPad mini, iPad mini 2, and iPad mini 3

The screen rotation lock on the aforementioned iPads can be locked in two places: via a toggle on the side panel (above the volume buttons)

If the screen rotation lock is enabled using the switch on the side panel of the iPad, then you can disable this option in the standard application Settings → General → Switch on the side panel. To do this, select the “Mute sound” item. After that, the switch on the side panel will not be responsible for locking (orientation) screen rotation, but for turning off the sound.

When the value of the switch on the side panel, which is responsible for mute, is selected, orientation lock can be performed only in the Control Center using the corresponding button:

In order to lock the screen in the current orientation, just click on this icon.

If instead of the screen rotation lock icon in the Control Center there is a mute icon, this means that the value of the switch on the side panel is set to Orientation lock (the switch on the side panel is responsible for locking (orientation) of the screen rotation).

If, after completing all the above steps, you still fail to remove the screen rotation lock, try restarting your iPad. To do this, press and hold the Power button until the Power off slider appears. After turning off iPad, press and hold the Power button again until the Apple logo appears on the screen.

If the restart did not help, then, unfortunately, you will have to contact the iPad repair service center.

NNCXV.INFO 2021