How to Factory Reset iPhone

How to Factory Reset iPhone Without Apple ID Password in 2021

Modern mobile devices have many levels of protection, which often make the system inaccessible not only for intruders and outsiders, but also for the owners themselves. The reason is trivial, because both old and young people can forget the entered password, especially if they are often changed to enhance the security of the gadget, which can be fraught with similar consequences. And everything would be fine, but only the number of attempts to enter the coveted cipher is limited, so you should never rush to try all possible combinations so as not to block the device.

How to solve the problem through iTunes if you forgot your password

ITunes is considered to be one of the most multifunctional devices for Apple, which helps to quickly and easily restore a locked iPhone. But it is enough just to enter the wrong code several times in a row or use the biometric scanner incorrectly for the phone to go out completely. Therefore, in such situations, it always makes sense in a PC with iTunes installed on it.

factory, reset, iphone

At the same time, for the recovery itself through the application, the following step-by-step algorithm of actions is provided:

  • Connect the smartphone to the PC via the supplied cable.
  • Try to force restart the gadget by quickly pressing the plus and minus of the volume control (relevant for models “8”, “8 Plus” and older). If you use earlier versions, such as “6s”, then it makes sense to simultaneously hold down two keys at once. “Home” and “Power / Volume”. But the activation of an extinct iPhone in almost all devices is carried out in the same way, or to be more precise, by pressing and holding the side controller for a long time.
  • If the iPhone has been restored to its senses, then you should select the restore option and synchronize, along the way agreeing to save the previously made backup file copies in the device’s memory.

At the final stage, the phone is reconfigured, after which it will not hurt to write out the saved code and password in some notebook or diary, so that one not very fine day the user does not have to restore this data again.

What is an Apple ID password and why it is dangerous to forget it

One of these security codes is the Apple ID password, found exclusively in Apple products from Cupertino. And unlike many other locking tools, the use of this key is mandatory, and from the very beginning of the device’s operation, that is, from the moment of its first setup.

In the first case, the user is prompted to enter a name written in Latin with the obligatory ending “@ iCloud.com”, while the password requires a combination of numeric and alphabetic characters with the obligatory use of uppercase and capital letters.

It is noteworthy that to create your Apple account it is not at all necessary to purchase a new device, because you can register on the official website appled.Apple.com, doing it completely free.

In this case, it is not at all necessary to tie up your bank card data, despite the fact that the system will request them. over, if you do not intend to use iTunes or any other paid Apple services, then it is better not to tie the card at all, since by agreeing to a 3-month free subscription to any application, its owner risks receiving an automatic withdrawal of funds after the specified period.

It should be noted that it will not be possible to do without accounting, not only at the initial stage of operation, but also in the future, since access to the AppStore and any other built-in service of the company without an Apple ID continues to be impossible.

But changing the secret code-password is quite real, and completely free of charge and as much as your heart desires. To do this, go to the “Account Management” menu and enter a new password with a mandatory duplicate confirmation, using for this purpose any synchronized device with the same ID.

How to Factory Reset iPhone 5, 5S, 6S, 4C, SE without Apple ID

Naturally, it is possible to change the account settings only if the information about the previous data has not been lost. In all other cases, you will have to reset the basic parameters of the smartphone or tablet to the factory settings, which is fraught with the complete loss of personal data. It is quite simple to insure yourself against such consequences, because you can always dump all information from Apple products to a PC or hard drive in time, using such a universal tool as iTunes.

As for the very algorithm of actions for resetting the settings, it is not difficult, assuming a transition to the settings menu, and then to the section “Password and Security”. For the reset itself, you will have to strain your brains and remember all the secret answers to questions, trusted phone numbers and mailboxes, as well as recovery keys that were specified by the user during registration.

It is also worth noting that you can implement your plan not only from this iPhone, but also from a device paired with it using the same Apple ID.

Things will be much more difficult if the user forgets all security questions at once, or loses access to synchronized devices operating from a shared account. Nevertheless, today even such problems are easily and quickly solved, albeit through the use of third-party software such as “Apple Support” and “Find iPhone”.

The first application is supported by Apple devices running iOS12 and later versions of the proprietary operating system. As for its use to reset user data, immediately after downloading the software from the AppStore to the gadget system, it is recommended to act in accordance with the following instructions:

  • First of all, you need to go to the “Get support” section, which can be seen at the bottom of the device display.
  • Next, from the entire list, select the tab “Apple ID” and “Forgot your password”.
  • The next step involves clicking on the option “Another password”.
READ  iPhone 7 won't turn on after update

After going through the specified chain, you should reset the code, following the instructions, which may differ slightly depending on the type and model of the device. The Find iPhone program is no less effective in solving this problem, moreover, it is suitable not only for the 12th version of the operating system, but also for its earlier versions (and therefore for older devices), starting with the 9th Factory reset works in this application according to the following principle:

  • Immediately after entering the software, you must make sure that the field is free of any characters. If this is not the case, then you will have to manually delete the entered data.
  • Then click on the command “Forgot your ID or password?” and all the necessary reset manipulations are performed.

If the input screen remains inaccessible, then there is always the opportunity to exit and re-check the state of the field to enter the verification code. And if this time it is empty, then you can safely bring the started business to its logical conclusion.

Password recovery methods

It is worth noting that an almost identical method for recovering user information is provided when using the iCloud cloud storage service. But that’s not all, because there are a lot of life hacks for changing the password. And it is definitely worth taking a closer look at the following ones:

  • Resetting the counter of incorrect password attempts.
  • Using iPhone recovery mode, relevant only if the ID is known.
  • Installing a new firmware using a special DFU-mode, used when the previously performed manipulations were not effective enough.

It is noteworthy that all of these recovery tools are also based on iTunes, in most cases asking for an ID. But if the user cannot boast of such a privilege, and none of the methods works, then it is necessary to check all paired devices for logging into iCloud, and also exclude the presence of activated 2-factor authentication. Alternatively, you can try to fix the problem in the following ways:

  • Click on the “Forgot ID or Password” option, after going to the account page.
  • Select the item “Reset password” and confirm it with the command “Continue”.
  • Decide on the method of resetting data by choosing an answer to security questions or sending a confirmation to an email address.

It is also worth recalling that when requesting a recovery key, you will have to pass verification in two stages, entering not only the user-specified identifier, but also the requested key. Next, a trusted gadget is selected, the changes are confirmed using the link sent to the specified address, a reset is performed, and a new password is specified. Voila! iPhone is restored and ready for further use without the slightest threat to user security.

How to turn off Find My iPhone

  • Move the slider next to this function to the off state. To make the final changes, you will need to enter your Apple ID password. From now on, a full reset of the device will be available.
  • How to Hard Reset iPhone

    Recovery Mode

    The following method of restoring a gadget via iTunes is only suitable if the gadget was previously paired with your computer and the program. But in situations where recovery is required to be performed on someone else’s computer, for example, to remove the password from the phone, using the recovery mode is suitable.

    • Unplug your phone completely and then connect it to your computer using the original USB cable. Launch iTunes. Until the phone will be detected by the program, since it is in an inactive state. It is at this moment that you will need to enter it into recovery mode in one of the ways, the choice of which depends on the gadget model:
    • iPhone 6S and younger Simultaneously hold down two keys: “Home” and “Power”. Hold them until the phone screen turns on;
    • iPhone 7, iPhone 7 Plus. Since this device does not have a physical Home button, it will enter recovery mode in a slightly different way. To do this, hold down the “Power” and volume down keys. Keep holding until the smartphone turns on.
    • iPhone 8, 8 Plus and iPhone X. In the latest models of Apple devices, the principle of entering Recovery Mode has been quite changed. Now, to put your phone into recovery mode, press and release the volume up key once. Do the same with the volume down button. Hold down the power key and hold until the device turns on.
    • The following image will indicate a successful entry into Recovery Mode:
  • At the same instant, the phone will be detected by iTunes. In this case, in order to reset the settings on the gadget, you will need to select the “Restore” item. After that, the program will start downloading the latest available firmware for the phone, and then installing it.
  • iTunes

    The main tool for pairing iPhone with computer is iTunes. Naturally, a full reset of content and settings can be easily performed using this program, but only if the iPhone was previously synchronized with it.

    • Connect your phone to your computer using a USB cable and launch iTunes. When the smartphone is identified by the program, at the top of the window, click on its thumbnail.

    On the Overview tab on the right side of the window, there is a Restore iPhone button. Select her.

  • Confirm your intention to reset the device and wait until the end of the procedure.
  • Factory reset iPhone

    Hard resetting your device will erase all information previously contained on it, including settings and downloaded content. This will restore it to the state it was in after purchase. You can perform a reset in different ways, each of which will be discussed in detail below.

    Note that you can only zero your device using the first three methods if the Find iPhone tool is disabled on the device. That is why, before we move on to the analysis of these methods, we will consider how the protective function is deactivated.

    IPhone Settings

    Perhaps the easiest and fastest way to reset is through the settings of the phone itself.

    At the end of the window that opens, select the “Reset” button.

  • If you need to completely clear the phone of any information it contains, select “Erase content and settings”, and then confirm your intention to continue.
  • Preparing to restore the device.

    • Open “Apple ID Profile” → “iCloud”.
    • At the bottom of the “Programs Using iCloud” section, find and open “iCloud Backup”.
    • Click “Create Backup”.
    • You must turn off Find My iPhone.
    • Go to Apple ID Profile → Latitude.
    • Find the item “Find iPhone”, open it, and then turn it off (you will need to enter your Apple ID password and then click the turn off button).
    • Go back to your profile (Apple ID).
    • At the bottom, find the “Exit” button and click it.
    • You may be asked to enter your Apple ID / iCloud password, if so, enter it.

    How to Factory Reset iPhone?

    Regardless of whether you are going to sell, donate or send your iPhone for repair, you do not need to keep your personal data and photos on your smartphone and become available to prying eyes. Therefore, just for such cases, you need to reset the iPhone to factory settings and delete all personal information. When you roll your iPhone back to factory settings, it returns to its original pre-sale state. It won’t have music, apps you’ve installed, or other data. Apart from the above situations, this function is also useful when the problem with the phone is so serious that nothing else will help.

    READ  How to close open apps on iPhone 11

    Roll back iPhone to factory settings

    • Go to “Settings” → “General”.
    • Scroll to the very bottom and hit “Reset”.
    • On this screen, you will be presented with a number of reset options, ranging from resetting your smartphone to resetting its dictionary or geo. To reset your phone to factory settings, you need to select “Erase content and settings”.
    • If your phone has a passcode, you will be prompted to enter it.
    • After that, you will see a warning that if you continue, all music, photos, videos, and other data will be deleted. Select “Cancel” or confirm your decision by clicking “Erase”.

    It usually takes one or two minutes to delete all the information. When the reset process is complete, your phone will restart and you will have a completely new (software-wise), clean iPhone.

    IPhone Factory Reset Precautions

    But, before proceeding with the description of the ways to reset iPhone to factory settings, you need to make some warnings.

    • Before proceeding with a factory reset, you need to make sure your iPhone is at least 30 percent charged. Because if it runs out of power during a factory reset, it will create additional problems for you.
    • You shouldn’t do a factory reset on a jailbroken iPhone. Otherwise, it may cause the smartphone to freeze when loading.
    • It is highly advisable to make a backup before resetting iPhone. If necessary, this will allow you to restore important information that was on the device before the reset. In order to make a backup, you need to connect your iPhone to your computer, launch iTunes and open “File. Devices. Create a backup copy”.

    How to Factory Reset iPhone

    Factory reset on iPhone can be useful in various situations. For example, in the event of a sale of a device or in the event of various software failures.

    In this article, we will look at two ways at once on how to reset iPhone to factory settings. These methods will be relevant for all the latest models of smartphones from Apple, including iPhone 4, 4s, 5, 5s, 6, 6s and 7.

    Factory Reset iPhone

    The easiest way to reset iPhone to factory settings is to use a special function in the settings of the device itself. To do this, open the “Settings” application on the iPhone and go to the “General” section.

    After that, you need to go to the settings subsection, which is called “Reset”. This section should be located at the very bottom of the “Basic” section.

    After that, you will see a list of what you can reset on the iPhone. At the very top there will be two main options for resetting the settings “Reset all settings” and “Reset content and settings”.

    The first option, “Reset All Settings” is a reset that will exclusively affect your iPhone’s settings. In this case, all your personal data (including photos, contacts, music) will remain in the smartphone’s memory.

    The second option “Reset Content & Settings” is to hard reset your iPhone. In this case, not only the iPhone settings will be deleted, but also all the content in its memory. In other words, all user data will be deleted from the smartphone’s memory.

    In addition, in the “Reset” subsection, other methods of resetting the settings are available: Reset network settings, reset the keyboard dictionary, reset the “Home” button settings and reset the geolocation settings. These factory reset methods only affect specific iPhone settings.

    Factory Reset iPhone via iTunes

    The second way to reset iPhone to factory settings is to use iTunes. But, in order to use this method, you must first change some settings on the iPhone.

    To do this, go to the settings on the iPhone and open the “iCloud” section. This is where you need to find Find My iPhone and turn it off. Please note that in order to disable this feature, you will need to enter your iCloud password.

    After Find My iPhone is turned off, you can proceed with a factory reset. To do this, connect your iPhone to your computer and launch iTunes. After iTunes detects the iPhone, you need to click on the device icon in the upper left corner of the program.

    And click on the “Restore iPhone” button. Pay attention, just below there is a button “Restore from a copy”. This button is responsible for restoring iPhone from a previously created backup and has nothing to do with factory reset. Therefore, there is no need to confuse the buttons “Restore iPhone” and “Restore from a copy”.

    After clicking on the “Restore iPhone” button, a pop-up window will appear warning you about resetting your iPhone to factory settings. In order to confirm the reset, you need to click on the “Restore” button. After that iTunes will start the factory reset process on your iPhone.

    In addition, iTunes allows you to reset iPhone to factory settings in recovery mode. To do this, you need to connect the iPhone to the computer, hold down the power button and the Home button and hold them for ten seconds, after which you need to release the power button and continue to hold the Home button. This will put your iPhone into recovery mode. Now you just need to click on the “Restore iPhone” button in iTunes and wait until the reset process is over.

    Easiest Way to Factory Reset on iPhone 11

    We would like to present to your attention the best way to reset the settings to factory settings using the program.

    How to reset iPhone 11 to factory settings? (general way)

    If you are going to sell your phone and or give it to someone else, or your device “freezes” and stops working, or you are going to buy a new iPhone, then the first thing you need to do is to reset the phone to its factory settings. with your gadget, you don’t have to worry too much. We suggest that you disassemble the methods of resetting to factory settings.

    Factory reset on the iPhone 11 itself

    This method is easy and simple, since you do not need to install special programs to reset the device to factory settings. You just need to go to the settings of the device itself. The only thing that is required of you is your Apple ID password.

    Note: Please be aware that before you reset your phone to factory settings, be sure to make a backup.

    Enter the settings of your device, following the following sequence of actions: Settings General Reset.

    Then select the item: “Erase content and settings”.

    Then you will need to enter the password for your gadget, and then the password for your Apple ID account.

    In the final step, you will need to confirm the data reset by clicking on “Erase iPhone”, and then wait until the end of the action.

    How to Factory Reset iPhone 11?

    Advances in technology are taking big strides, allowing almost everyone to have their own smartphone. In the world there are a huge number of fans of Apple production, and among them an impressive number of owners of iPhone smartphones. A factory reset may be necessary for various reasons, ranging from device freezing to losing the password from the gadget. If you are an iPhone 11 owner and you had to face such a question as how to reset iPhone to factory settings, then our article will be useful for you. this is the deletion of all data stored on it from a gadget or tablet. These can be contacts, messages, downloaded applications, photos, music, etc. After this procedure, your device returns to factory settings.

    READ  iPhone does not turn on the apple is on and goes out

    How to Factory Reset iPhone 11 Using ReiBoot

    The main advantages of this program are that it helps to get rid of many iPhone related problems with ease. If your device is frozen, then in just a couple of clicks you can enter and exit recovery mode. So, for example, if your smartphone is frozen at the Apple logo, then you just need to download and install the latest version of the program to fix the freezing problem. And if you have forgotten your passcode, then you can remove the iPhone screen lock even if the device is disabled. Another advantage of this program is that with it you can reset to factory settings if you were unable to do it with iTunes. ReiBoot is a powerful tool in fixing iOS bugs like iPhone update error, iPhone app crashing, etc.

    So, to get started with this program, first go to the Tenorshare website, download and install on your PC. the program and follow the instructions below:

    Step 1 After you have downloaded and installed the program on your PC, connect your smartphone to your PC. Next, in the window that appears, click below on “Fix Operating System”. Select Recovery Deep.

    Step 2 Next, confirm the model information and download the appropriate firmware package before restoring. In “Save path” you need to specify the path to download the firmware package from the local folder of the computer or, if you do not have the firmware package, then click “Download”.

    Step 3 At the final stage, click on “Start recovery” and wait until the action is complete.

    Your system has been successfully repaired

    How to Factory Reset iPhone Using iTunes

    You can also reset iPhone to factory settings using Apple’s iTunes software. This method requires your PC and iTunes. To start the reset process, first of all you need to follow the step-by-step steps:

    Download and install iTunes on your PC and run. Connect iPhone to computer with USB cable and turn on iTunes.

    In the window that appears, select the icon of your phone by clicking on it. Next in the “Settings” section, select “Overview” and then select “Restore iPhone”.

    Disable Find My iPhone. To do this, go to the “Settings” section, then to iCloud, and then to “Find iPhone”. You will see a notification about the start of the action. You will need to click on “Restore”. By selecting this item, all data stored on your smartphone will be deleted, and the latest version of the system will be installed.

    Go to iCloud.com, which is cloud storage. Next, enter your Apple ID password. In order for your device to no longer be linked to Apple ID, go to the “Find iPhone” section and delete your device.

    How to Properly Reset iPhone to factory default

    So, we have analyzed several ways to reset your smartphone to factory settings. Before starting this step, we recommend that you make a backup so as not to lose your photos, contacts, messages, videos, music, etc. Also, be sure to check if the phone has enough charge before doing a reset. If you have a need for any reason to reset your iPhone to factory settings, then we strongly recommend using the ReiBoot program. Even if you have forgotten the password for your device, you can still reset the gadget to factory settings. This program will help get rid of any kind of freezing in just a couple of clicks. Plus, it is fully compatible with all iPhone / iPad / iPod models (iPhone 11 / 11pro / XS / XR / iPad Pro). If you get error 4013/4005 when restoring iPhone in iTunes, then the program can easily bypass iTunes restore or backup errors.

    How to factory reset iPhone 8 without losing data if you forgot password

    Usually, the iPhone owner is faced with the need to reset the iPhone X / 8/8 Plus to factory settings without losing data in several cases: if the phone stops working correctly, starts to glitch and lag, malfunctions appear regularly, or before selling and buying a new device. In some cases, the user forgot the password or entered it incorrectly several times in a row, which caused the device to be locked. Standard reset methods, for example, through iTunes, will not help here. The use of professional software is required. ReIBoot.

    How to Factory Reset iPhone without Passcode

    If you forgot your password, you may not be able to reset iPhone 7 Plus / 7 / SE / 6 Plus / 6s / 6 / 5s / 5c / 5 to factory settings using the usual method via iTunes / iCloud or via the Settings application on the device itself. And if Activation Lock is enabled, sooner or later you will need to enter a password or log in using the Touch ID fingerprint scanner.

    The second problem is deleting all data after restoring iPhone to its original state after purchase. As you know, resetting iPhone 6 to factory settings will entail a complete wipe of all information from the device. Here, the solution may be to back up all data on the iPhone. then all data can be restored from the backup file. But all this is very long and difficult. The easiest way to use the Tenorshare ReiBoot program.

    How to reset iPhone if you forgot your password?

    We suggest that you read the detailed instructions on how to reset iPhone to factory settings without losing data if you forgot your password. Tenorshare ReiBoot utility will restore your phone and reset all settings without requiring you to enter a password, while maintaining all data on the device. You don’t even need to back up everything on your phone, download Tenorshare ReiBoot from the official page (Mac and Windows versions available). Install the utility on your computer.

    How to Reset iPhone To Factory Default

    1.Connect your iPhone, iPad, iPod to your work computer with a USB cable. Then launch the preinstalled Tenorshare ReiBoot program.

    Next, click on the “Solve all iOS freezes” button at the very bottom. Click Fix Now. The program identifies your device and prompts you to install the current firmware version. Click “Download”.

    When the download of the new firmware version is completed, you need to click on the “Start recovery” button.

    It will take about ten minutes for your iPhone to be restored. After that, it will be ready to go. Now you know how to reset iPhone to factory settings without data loss and if forgot password.

    You can also use the advanced recovery mode, but this will completely clear all data on the device and reset all passwords.

    NNCXV.INFO 2021