How to flush the epson inkjet printer head

How to flush an EPSON printhead with the cartridge method using the Color-print RED-BLOOD flush

If your Epson printer does not print well and streaks, the most likely cause is a clogged print head. This happens most often after downtime, as Epson printers are particularly sensitive to downtime. Also, the reason that the printer strips may be lack of ink, or ink of dubious quality.

The safest way to flush an Epson printhead at home is to flush with a cartridge flush using flush kits and Color-print RED-BLOOD flushing fluid specially designed for flushing the cartridge.

You can also use these flushing kits to preserve your printer before long idle times.

We strongly recommend using the Color-print RED-BLOOD flush only in the flush set, using new refillable cartridges.

The set for flushing and preserving the Epson printhead consists of refillable cartridges (RPC), flushing liquid OCP RSL and a special component Color-print RED-BLOOD in a separate syringe.

flush, epson, inkjet, printer, head

So, now let’s move on directly to the flushing itself.

1) First you need to prepare the Color-print RED-BLOOD flushing fluid. To do this, add the contents of the syringe to the OCP RSL flushing liquid, then close the bottle with a cap and shake well. Color-print RED-BLOOD Flush Fluid is ready to use and has a bright pink color.

2) Now you need to prime the new refillable cartridges included in the flush kit with the prepared Color-print RED-BLOOD flushing fluid. If necessary, you can read the Instruction for refilling refillable cartridges for Epson printers.

3) Install the slam-shut valve filled with Color-print RED-BLOOD flushing, do 2-3 cleanings and leave the printer to stand for 2-3 hours, then try a nozzle test and, if necessary, clean more. Alternate 2-3 cleanings and 2-3 hours of downtime. In severe cases, you can leave the flush cartridges in the printer for a day or more until you achieve a positive result. The nozzle test should print in a barely noticeable pale pink color, if you cannot see it, you can, for example, print a test image using the shut-off devices filled with a color-print RED-BLOOD flush

When printing with Color-print RED-BLOOD, there should be only a pale pink color, if there are any other colors, you need to do a head cleaning. After you have cleaned the print head from ink and clogging, you can either install a slam-shut / cnp with ink, or leave a slam-shut with Color-print RED-BLOOD in the printer. If you, for example, go on vacation and want to keep your printer, this will be just an excellent tool for conservation, since Color-print RED-BLOOD will preserve the print head and prevent it from drying out.

READ  Epson Printer How To Print Black And White

To check and clean the nozzles, use the standard epson driver tools for your printer.

1) Go to the “Start” menu and select “Printers and Faxes” there, in the window that opens, select your printer and right-click on it. In the menu that opens, select the bottom item “Properties”, if you did everything correctly, this window should open:

2) Click the “Printing Preferences” button and after that, in the window that opens, go to the “Service” tab:

3) Using the buttons in this window, you can do a nozzle check and print head cleaning:

How to clean the print head of an inkjet printer

To begin with, it should be noted that the print head of the printer and mfp is the most important and at the same time the most “capricious” element of such devices. The fact is that long idle times of the print head can clog its nozzles, i.e. it may just dry out. In this case, competent and accurate cleaning of the print head will be required.

Different brands of inkjet printers use different printhead devices from different manufacturers. For example, there are types of such heads that are combined with the cartridge reservoir hopper. There are also item data models that are built directly into the printer. In this case, only the ink hopper is a replaceable consumable.

Printhead defects

If one day you notice that documents and photos began to be printed by your printer far from the way they should, for example, horizontal white stripes began to appear on a sheet of paper, then first of all start printing a nozzle test. For this purpose, go from the “Start” menu to the “Devices and Printers” item, then select your device in the window that opens and select the “Printing preferences” line. There you should click on “Nozzle Check” by going to the “Service” tab. Next, print a nozzle test so that you can compare it with the sample that appeared on the PC monitor.

It will be good if you see similar pictures on the test. In this case, cleaning the print head will be reduced to using the special function of regular cleaning on the same “Service” tab. Usually, this is enough for the printer, and it starts to print as before. Please note that one or two such cleanings are enough, otherwise, the nozzles in the printer may fill with bubbles, which will only aggravate the situation. Consequently, cleaning the nozzles in this case will result in additional costs for repairing the entire printer. Also, keep in mind that cleaning the print head using this method requires ink, which could be enough to print three to five sheets of text or several photos.

READ  Epson Printers With Cis Which Is Better

After washing the printer’s print head as described above, leave the machine for two to five hours. Next, make a test print. In the event that the printer prints through a line or white stripes are visible on documents and photos, you can turn on another cleaning cycle.

But it should be said that if, after printing a nozzle test, you do not see one or more colors, then you have to answer the question of how to clean the printer head manually. Please note that cleaning the print head in this case requires a competent and serious approach. Therefore, if you are unsure of your abilities, then it is better to initially seek help from the masters. Otherwise, you can only aggravate the breakdown, which will lead to the fact that you have to buy a new printing device.

In addition, users have to deal with the problem of how to align printheads. This problem becomes relevant when misaligned vertical lines appear on the printed photo or text. The question arises, what to do in this case? To align, you just need to find the name of your printer in the “Printers and Faxes” item and open the “Print Head Alignment” item in the “Maintenance” tab. Then follow any further instructions that will appear in the dialog box.

Ways to solve the problem

So, if the printer prints with white stripes, then the problem is most likely that the print head of the device has dried up. To answer the question of how to clean the print head, you first need to purchase a fluid specifically designed for inkjet printers. However, only those heads that are built into the cartridge and removable versions of these parts can be cleaned in this way.

First of all, you need to solve the following problem: how to remove the printer head. So, it is necessary to remove this part from a pre-switched on printer. Open the cover and, after waiting for the device to stop completely, you need to press the cartridge. To remove this consumable from the printing device, simply pull it up. After that, you can safely pull out the head itself. for this you need to pull on the special lock. Only after that you can proceed to solving the next problem: how to clean the print head.

READ  How to connect an epson printer to a laptop

Alternatively, to solve the problem of how to flush the head, a print cycle can be performed using a cleaning fluid. To use this method, fill the cartridge with liquid and then use the head cleaning function to print. After completing this procedure, leave the printer off for a couple of hours. this is necessary so that the liquid has time to dissolve all the ink that has dried in the nozzles.

If the printer displays the “wrong type of print head” problem on the screen, then most likely this part of the printer is completely out of order. But you can try to pull this head out of the running printer and thoroughly clean all the contacts on it. Use an eraser for this purpose.

Thus, in order to answer the question of why the printer began to print across the line, you do not need to be a professional. Use all the methods described above, but if suddenly the printer stops starting, then contact the wizard.

Watch a video on how to flush the print head nozzles and run cleaning

| Message Sent on June 08, 2015 22:10 combain

  • Offline
  • Info
  • Posts: 10 613
  • Registration: 20 Jul 14
  • Reputation: 1700
  • Reputation 2019:
  • Pro
  • | Message Sent on April 07, 2010 06:06 mag54

    • Offline
    • Info
    • Posts: 217
    • Registration: 22 Feb 07
    • Reputation: 8
    • Reputation 2019:
  • Specialist
  • | Message Sent on June 08, 2015 22:26 localhost

    • Offline
    • Info
    • Posts: 10 716
    • Registration Date: 07 Aug 11
    • Reputation: 1604
    • Reputation 2019:
  • Pro
  • | Message Posted on June 08, 2015 21:40 Printscreen

    • Offline
    • Info
    • Posts: 36
    • Registration Date: 27 Apr 10
    • Reputation: 5
    • Reputation 2019:
  • Own
  • please, help. encountered a problem, MP970 MFP.
    photo agent and black photo are not printed halfway. photomagent in general, the upper part is white, and the black is half gray. I attach the screen.
    The head was flushed as described in the title post. the result is zero. What could be the reason?

    | Message Posted on June 09, 2015 20:04 Printscreen

    • Offline
    • Info
    • Posts: 36
    • Registration Date: 27 Apr 10
    • Reputation: 5
    • Reputation 2019:
  • Own
  • NNCXV.INFO 2021