How to fold your iPhone headphones into a box

How to fold iPhone headphones into a box

My wireless Airpods review: https://goo.gl/rvPGC0

Putting Lightning EarPods from iPhone 7 and iPhone 7 Plus back into the box is EASY. The Apple headphones that come with the iPhone 7 and iPhone 7 Plus do not have a plastic case, but some kind of cardboard box. The smartphone does not have a 3.5 jack, so most likely you have already bought wireless headphones for the seventh iPhone and you no longer need the complete iPhone headset. Packing back the EarPods from the iPhone 7 package is not so easy, but this is only at first glance, you just have to look at this tutorial and the question: “how to put the EarPods back in the box?” you won’t care anymore.

This is the second channel of the Apple User project on YouTube, where I still talk about # technologies and # gadgets, about #Apple in general, but in a more drawn-out and lively format, the #LIVE format. Periodically, there will be #unpacking devices, various accessories, reflections and answers to questions about #iPhone, #iPad, #iPod, #iOS and about other #smartphones too.

Link to social networks and other sites of the project in the section “About the channel”.

Video How to pack iPhone 7 (Plus) Lightning EarPods back into the box? Apple User Live channel

You don’t have to use covers, clips or your smartphone for this. everything is much simpler.

Tangled headphone wires are a perennial problem for most people who use them. Hurriedly tossing your headphones into your bag or backpack, the rest of the way home, you untangle the wires like a garland. We will tell you about a couple of tricks that will help you avoid this.

Important: to avoid mechanical damage, do not pull the headphone wire too tight.

Roll the wire into a figure eight

Fold your hand as if you were throwing a goat at a rock concert.

Wrap the wire around your little finger on the outside of your palm, then around your index finger on the inside.

Roll the headphones in this way, leaving a small piece of wire.

Tie them the coiled headphones in the middle.

Plug the plug into the loop formed from below.

Pull on opposite ends of the earbuds to unwind them.

Wrap the wire around your fingers

The method is not so elegant, but simpler and faster. It was shared by Dieter Bohn of The Verge. Wrap the headphones around three fingers, then tie the rest of the wire in the middle and remove the plug into the loop. In this way, you can wind up not only the headphones, but also other cables.

Do you know other convenient ways? Share them in the comments.

Most users of Apple devices (namely iPhone, iPod and iPad) regularly use the included headset. However (I am 100% sure), not everyone knows about what opportunities the developers from Cupertino have endowed it with. Of course, you can listen to music and make conversations with it, but this is not all that a pair of headphones from the iPhone box is capable of.

It’s worth making a reservation right away, this article will focus on an advanced headset with additional volume buttons. The earlier model with a microphone and a call button (earlier iPhone models and many iPods were equipped with it) is not capable of all the manipulations described below.

fold, iphone, headphones

  • Siri activation. A long press on the center button (about 2-3 seconds) will bring up Siri on iPhone 4S or voice control menu on earlier iPhone and iPod models.
  • Volume control. Probably, there is no need to explain that the volume is controlled by the buttons “” and “-” on the headset. If music is playing, the volume of the player changes, if a call is active, the volume of the conversation is adjusted, and if no application is active, the overall volume of the system is adjusted.
  • Stop and resume playback. If you are listening to music or watching a video, a simple press on the middle button will pause / continue playback. This function works not only with standard audio and video players, but also with most third-party applications.
  • Switch between audio tracks. In music playback mode, you can use the center button to skip to the next or previous track. Two short presses on it will switch to the next song, and three. to the previous one.
  • Rewind the song being played. In iPod music playback mode, you can fast-forward and rewind a track. To fast forward, press the center button twice and do not release it during the second press. To rewind. press three times and do not release during the third press.
  • Answering a call and ending a call. With an incoming call with a headset connected, you must press the center button once. The same action will end the call.
  • Reject an unwanted call. With an incoming call, you need to hold down the central button for 2-3 seconds and the call will be rejected. This will be evidenced by the soundtrack in the headphones.
  • Switching between lines. During a conversation with one subscriber and a call is received on the second mowing line, a short press on the middle button will result in an answer to the second line (the first will go into standby mode at this time). In the future, a short press will switch between lines, and a long press will end the conversation on the current mowing line and go to the one that is waiting.
  • Pictures by the camera. Many users know that in iOS 5 it became possible to release the shutter by pressing not on the touch button on the screen, but on the “” volume control button. The same rule applies to the “” button on the headset when the camera is running. It should be noted that this function only works in the standard camera application.

I hope this article was useful and you learned something new about the standard headset from Apple.

Recall that at the presentation of the iPhone 5, Apple introduced the new EarPods, which will be included in the sixth generation smartphone, as well as the updated iPod Touch and iPod nano players. Most likely, our instructions will also apply to the new headset.

There are also a large number of third-party headsets with remote controls, it is difficult to guarantee that all functions work as with standard headphones. Each headset must be tested for compatibility separately. Sound may be played, and all of the above functions may not always be performed. One of the main conditions for the operation of all functions is the presence of four contacts on the audio plug, and then everything is checked empirically.

If there are only three contacts, then you should not rely on additional functionality in the form of volume control or track switching, even if there is a special remote control on the headset wire. I personally recommend that you only use standard Apple headphones. They provide an optimal balance of playback quality and available functionality. It is always convenient to call the voice assistant on the go (not to be confused with Siri) and call the desired subscriber, or just scroll through and switch songs without taking the iPhone out of your

Appearance and ergonomics

Philips O’Neill The Tread headphones appearance

Philips O’Neill The Tread headphones are available in multiple colors, making them a model for all genders and all ages. The black version got to us for testing.

At first glance, outwardly, the novelty does not differ significantly from other in-ear headphones: a drop-shaped shape, a symmetrical division of the bifurcated upper section of the cable. But this is only at first glance

If you pay attention to the details, then it is not difficult to notice important differences. The emitter housing is made of milled 6063 aluminum for high strength and excellent corrosion resistance

Just stepping on such headphones with your foot will only get them dirty, but you won’t be able to break or even slightly damage the case. You can bang the headphones against the wall or throw them on the floor. even the appearance will not change. The sturdy back of the earbuds is either hard rubber or plastic, but it also looks respectful. It is extremely difficult to break it, except to start cutting.

The soft part of the body smoothly passes into the cable, which in this model, according to its properties, can be divided into two sections. upper and lower. The upper two sections, which directly fit the headphones, have soft, but thick enough wires. In principle, there is nothing unusual in their design. But the lower, the longest section, is distinguished by a special synthetic covering, which has a woven structure with woven Kevlar threads. Kevlar provides high tensile strength, but it does not resist punctures and cuts. By the way, although the golden threads in the cable braid look like Kevlar, they are definitely not. Most likely, this durable material is hidden inside the braid.

In addition to the headphone housing and the wire, the connector is also of interest from the point of view of strength characteristics. It looks quite solid, has an impressive body covered with a pleasant to the touch rubberized material, but the cable is unlikely to protect against a fracture at the junction. Rather, his life will be extended by a synthetic braid, rather than a durable body of the plug itself. over, the connector is made too long, and therefore creates inconvenience during operation and, more often than usual, makes the cable bend and break when the player is in your

But the connector on a short adapter for connection to Nokia, Samsung and Sony-Ericsson phones is designed much more competently. It has an L-shaped body and more modest dimensions, which ultimately certainly has a positive effect on the cable lifespan.

Well, you cannot ignore the remote control built into the headphones with a volume control slider. The slider on the Philips O’Neill The Tread is not spring-loaded

The volume is adjusted by fixing the slider in any of its intermediate positions. True, its stroke range is very limited, and therefore even a slight movement of it leads to a significant change in volume.

Rather, this remote control is not suitable for adjusting the volume, but for quickly reducing its level to a minimum, which is extremely important for headphones aimed primarily at sports or any other types of activity.

Wireless device

The above measure should help in the case of a damaged wire (if one earphone does not work). How to fix a bluetooth headset? The answer, unfortunately, is not encouraging. Such a technique is most often not intended for self-repair by the owner, and something can be done only if there is certain knowledge in this area. Therefore, you have to replace the device or contact a specialist.

Most often, such a problem overtakes (one earphone does not work), but due to the high cost, any such damage is solved by warranty service centers. The same applies to other headsets released under well-known brands, so you shouldn’t despair. But if buying a Bosch is cheap, replacing the device with a new one will be much easier and faster.

According to the assurance of manufacturers, it is by no means small and ranges from 3 to 5 years. Why are devices not living up to this time? Here’s the catch. users often mishandle them.

Why do the headphones break down quickly, or one of them suddenly stops working? Often times, audio devices are in a hurry to slip into a or bag. Such negligence leads to tangled wires and before connecting to or you have to untangle the knots from the cords, which does not contribute to the long service of the device. In addition, you can accidentally spill drinks on the headphones, pull hard on the cord, etc.

Another element of the device, the speakers, suffers from the carelessness of the owners. They can be accidentally wet or overheated.

These and other reasons lead to breakages in both full-size headphones and in-ear models equally. But there is no need to despair, you just have to study the article and find out how to extend the life of such accessories.

Why I was interested in this topic

Without music, I can no longer imagine how to live. If I go anywhere, go for food or just walk. music, I am at home alone, work or play. music, go to bed. music. As a result. music is constantly
. Maybe I have a musical addiction, but oh well, we are talking about something else. So, for the academic year, in the period of October
to May.
I wore three pairs of headphones. Medium Handling was gentle.

Two weeks ago, I bought new headphones, for which I did not spare money, they say, according to the seller, he has been using them for a year (he even showed them to me) and said, it makes sense to buy cheap headphones that fly out in a month. After spending 20 minutes, listening to almost all the headphones that were. I made a choice on the headphones that the seller advised. Explay AL-124

How did I like them? Quite good and high-quality sound compared to other headphones and with which I drove before. Quite powerful and durable cable. The most vulnerable places, because of which the headphones mainly “fly”, are reinforced.

Another vulnerable spot, the larger it is, the more vulnerable.

How to properly fold your iPhone headphones into a box

The process of packing iPhone earbuds into a box is not as complicated as it might seem. You can just use the branded box and not worry about another container.

Alternatively, if you do not want to constantly suffer with winding and putting all the elements in the nests, you can use the same Airpods box as a case.

Important! It is not necessary to use the original box. For the same purpose, a small cardboard or plastic container will do. The main thing is that there is a reliable cover that would not allow falling out.

READ  How to change alarm on iPhone

How to fold your iPhone headphones into a box

The well-known company Apple produces branded devices for its products, including headphones. This is a quality product that allows you to listen to music and audio books. Branded devices are not cheap and it becomes a shame if they become unusable due to improper storage and transportation. The article addresses the question: how to roll iPhone headphones into a box, what needs to be done to extend the life of the device.

How to roll and stow the EarPods in the box

Packing your EarPods is easy. Having practiced just a couple of times, a person will be able to do this constantly and without any problems. The packaging process is as follows:

  • The cable must be fully extended. There should be no knots or tangled elements on it.
  • The inserts are installed in place. Nothing can be confused here. If for some reason difficulties arise, you can look at what kind of device it had initially (at the time of purchase).
  • Start winding the cable around the special cable gutter counterclockwise. This is done until it comes to the volume control.
  • There is also a special place for the regulator in the box, in which it fits perfectly. It is very important to ensure that the wire is not pinched anywhere.
  • It remains only to twist the remaining amount of wire and remove the plug.
  • The assembled headphones are closed with a lid and stowed away in the carrying area.

Important! It is best if the headphone box is in a bag or inside a jacket. It is not recommended to put them in jeans or pants. When walking or squatting, the plastic structure may crack and become unusable.

How to put EarPods in the factory box

What to do if iPhone earbuds get tangled

How to roll up iPhone earbuds so that they no longer get tangled in your ? This question arises not only among users of Apple products, but also other people. There are many options and methods for how you can twist headphones so that they do not get confused.

On the Internet, it is proposed to twist the wires with a special knot, remove them from them in plastic boxes or fabric covers. If desired, storage space can be made with your own hands.

Several options suitable for storage and carrying:

How to Put Apple iPhone Ear-pods / Earphones back to travel case correctly

  • Use an old plastic card or thick cardboard. A pair of holes are made for the earbuds and the plug. The wire is wrapped around a cardboard (card).
  • A container from an old (ended) lipstick is also suitable as a case. The wires are wrapped around three fingers. The earbuds and plug remain on the top, while the bottom stays in the lipstick cap. So the device is easy to carry and take out at the right time.
  • Another option with a plastic card and a thick rubber band. The wires are twisted around the fingers, then fixed to the card with an elastic band.

There are really many options, but it is worth remembering that the conversation is not about ordinary headphones bought for 100 rubles, but about those intended specifically for the iPhone. How to pack iPhone headphones so that they do not get tangled, in a box or tied according to a certain method?

Best way to carry your headphones

Correct carrying and storage is a guarantee of the long service life of the equipment. The basic rules for storing and carrying the device, allowing it to extend its life, are as follows:

  • Take care of the wires. First of all, this concerns the fact that you cannot leave the device anywhere. It is best to put your headphones in a bag in a special container. So the wires will be less likely to get tangled, frayed and become unusable.
  • Do not carry them in pants or back s of jeans. Pinching the wires is almost one hundred percent damage.
  • Do not overcool the device. That is why, in winter, the wires must be under clothing. Do not leave the device in the cold or in the car during the cold season.
  • Keep children and pets away from wires. The latter just love to gnaw them.

How to pack Airpods in a box

Devices from the iPhone XR or 5 S, or any other version of the phone have special, factory boxes in which it is very convenient to store and carry them. In addition, it is a wonderful gift case that does not need additional packaging.

It is best to fold branded headphones in the original packaging. This will help increase their shelf life.

Step-by-step instructions on how to put iPhone headphones into a box is as follows:

  • Insert the inserts directly into the slots of the package. It’s not difficult, just remember how they were originally when you bought.
  • The wires are wrapped around the case. You need to reel counterclockwise. Given the depth of the gutter, they will fit perfectly as well.
  • The volume control retracts into a dedicated place for it.
  • It remains only to wrap the rest of the cable around the box.
  • From above, everything is covered with a lid. The packaging process is complete.

Important! Tying and tying the device in a knot is highly discouraged. Such handling will inevitably lead to deformation of the cable and quick breakdown.

Where to put the headphones

The most reasonable solution for storing headphones is to use a branded box. It is ideal for packing and storing fixtures. In addition, with its help, you can gently roll the wires so that they do not get confused in the future.

Easy Way to Assemble iPhone Headphone Case

The headphone case is made from the same branded packaging or using another suitable box. If abilities allow, you can make a case yourself from cardboard, plastic, wood and other materials at hand.

How, then, to fold the iPhone headphones into the box, using it as a case:

  • The middle part is carefully removed. In other words, a component with special holes for earbuds and a volume control. In this case, you need to start from the corner. Since the structure is assembled conscientiously, you will have to make a little effort. By prying the edge off, you can remove the core with a thin, sharp object. The main thing is not to scratch the bottom.
  • The elements left without a core create a wonderful case that you can use to store and carry your headphones. Only the bottom of the box and the transparent lid will remain on the hands.
  • The headphones simply roll up around the fingers, and then fit into the container and covered with a lid.

This use case is considered quite convenient. Since the structure is durable and well fixed, the device will not fall out, not damaged, and the wires will be significantly less tangled.

The main thing when using such a case is to ensure that the wires do not lie in a tangled state or tied in a knot. Both options have a bad effect on their condition and further use.

For the same purpose, you can purchase a small gift box that can be used as a case. A small package with a secure lid will do. The main thing is that the headphones lie neatly, and the wires are not pinched anywhere.

Branded devices are distinguished by their reliability and convenience, but that is why they require special treatment and careful storage. How to properly handle the headphones from the iPhone described above.

Regardless of which option the user chooses, it is necessary to remember the main rules: do not overcool the accessory, leave children and animals in the access zone, and leave them in the s of pants and jeans. Only with the right approach, the device can work for a long time, delighting with high-quality sound.

Roll the wire into a figure eight

Fold your hand as if you were throwing a goat at a rock concert.

Wrap the wire around your little finger on the outside of your palm, then around your index finger on the inside.

Roll the headphones in this way, leaving a small piece of wire.

Tie them the coiled headphones in the middle.

Plug the plug into the loop formed from below.

Pull on opposite ends of the earbuds to unwind them.

How to make the EarPods carry box

Carefully remove the middle part. You should start from the corner, and then you can pry it off with a paper clip. You will have to make an effort, the design is assembled conscientiously.

When the core is removed, it makes a great carrying case for EarPods.

All! Just roll up your headphones and put them in a box.

The headset will not get tangled, tied into a knot and contact with other things in your or bag.

You got a free, simple and beautiful headphone case, and it also has a bullseye on the bottom.

P.S.: if the box from the headset is gone, do not throw it away the next time you purchase original EarPods.

(5.00 out of 5, rated: 2)

You don’t have to use covers, clips or your smartphone for this. everything is much simpler.

Tangled headphone wires are a perennial problem for most people who use them. Hurriedly tossing your headphones into your bag or backpack, the rest of the way home, you untangle the wires like a garland. We will tell you about a couple of tricks that will help you avoid this.

Important: to avoid mechanical damage, do not pull the headphone wire too tight.

Description:

How to Fold the Earpods in the Box / Case.

For many iPhone owners, the bundled EarPods remains the only headset. Looking at all the advantages of headphones, there is no particular desire to change them.

We recommend wearing your EarPods in a carrying case or packaging to help them last longer. But where to get a suitable pouch, case or bag?

Believe it or not, I will say that you most likely already have the best case for EarPods.

Remember how you unpacked new iPhone after the purchase, tore off the protective film from it and activated the device. After that, you took out the lightning cable and EarPods from the box. Guess what we’re driving at?

Apple headset is packaged in a special plastic box with a design for a secure fit.

But we will not pack the headphones correctly every time! Instead, let’s turn the box into a convenient carrying case for the headset.

So, rather, remember where the iPhone box is. and take out the headphone case from there.!

Wrap the wire around your fingers

The method is not so elegant, but simpler and faster. It was shared by Dieter Bohn of The Verge. Wrap the headphones around three fingers, then tie the rest of the wire in the middle and remove the plug into the loop. In this way, you can wind up not only the headphones, but also other cables.

Do you know other convenient ways? Share them in the comments.

How to put iPhone headphones into a box

For many iPhone owners, the bundled EarPods remains the only headset. Looking at all the advantages of headphones, there is no particular desire to change them.

We recommend wearing your EarPods in a carrying case or packaging to help you last longer. But where to get a suitable pouch, case or bag?

Believe it or not, I will say that you most likely already have the best case for EarPods.

Remember how you unpacked new iPhone after the purchase, tore off the protective film from it and activated the device. After that, you took out the lightning cable and EarPods from the box. Guess what we’re driving at?

Apple headset is packaged in a special plastic box with a design for a secure fit.

But we will not pack the headphones correctly every time! Instead, let’s turn the box into a convenient carrying case for the headset.

So, rather, remember where the iPhone box is. and take out the headphone case from there.!

Roll the wire into a figure eight

Fold your hand as if you were throwing a goat at a rock concert.

Wrap the wire around your little finger on the outside of your palm, then around your index finger on the inside.

Roll the headphones in this way, leaving a small piece of wire.

Tie them the coiled headphones in the middle.

Plug the plug into the loop formed from below.

Pull on opposite ends of the earbuds to unwind them.

How to make the EarPods carry box

Carefully remove the middle part. You should start from the corner, and then you can pry it off with a paper clip. You will have to make an effort, the design is assembled conscientiously.

When the core is removed, it makes a great carrying case for EarPods.

All! Just roll up your headphones and put them in a box.

The headset will not get tangled, tied into a knot and contact with other things in your or bag.

You got a free simple and beautiful headphone case, and it also has a bullseye on the bottom.

P.S.: if the box from the headset is gone, do not throw it away the next time you purchase original EarPods.

(5.00 out of 5, rated: 2)

You don’t have to use covers, clips or your smartphone for this. everything is much simpler.

Tangled headphone wires are a perennial problem for most people who use them. Hurriedly tossing your headphones into your bag or backpack, the rest of the way home, you untangle the wires like a garland. We will tell you about a couple of tricks that will help you avoid this.

Important: to avoid mechanical damage, do not pull the headphone wire too tight.

Wrap the wire around your fingers

The method is not so elegant, but simpler and faster. It was shared by Dieter Bohn of The Verge. Wrap the headphones around three fingers, then tie the rest of the wire in the middle and remove the plug into the loop. In this way, you can wind up not only the headphones, but also other cables.

Do you know other convenient ways? Share them in the comments.

IFixit investigates the anatomy of the Airpods wireless headset, which Apple began selling about a week ago.

Airpods are highly sophisticated in design. They use a specially designed W1 processor. Each earbud has dual directional microphones, dual optical sensors, motion accelerometer and voice accelerometer.

The headset is supplied with a wireless charging case that provides several additional charging cycles. It is curious that 15 minutes of staying the headphones in this case provides up to three hours of listening to music.

An autopsy performed by iFixit showed that it was impossible to gain access to the inside of the Airpods without damaging the case. The same goes for the charging case.

A very strong adhesive is used in the construction of the headphones. In addition, a high component density was noted.

As a result, iFixit recognized the new product as completely non-repairable. Score. zero points out of ten.

Goodbye wires, pros and cons of Apple Airpods 2, who should buy them

Recently (namely 4 years ago) I first became a user of Apple products. Before that, I used techniques from other brands. This brand captivated me completely. If you need to buy a new phone, I will only consider the Iphone.

I don’t use headphones very often. Mostly at the gym, at work, and rarely at home. Therefore, Apple did not plan to purchase wireless headphones. Well, the toad choked to buy them for such a price, since I am an inactive user of headphones.

READ  How to make the background black on Instagram iPhone

And now, something went wrong, I got Airpods 2 with wireless charging.

Price at the time of purchase: 13 490 rubles.

Information from the manufacturer

Longer phone talk time. Activating Siri with your voice. Charging case with wireless charging capability. Airpods are all unique wireless earbuds that fit all your devices. Take them out of the case and you can use them right away. They will instantly connect, which means you can immediately immerse yourself in rich, high-quality sound. Like magic.

I really like how any Apple product is packaged. These are neat white boxes with a picture of purchased equipment. Nothing superfluous, always a minimum of unnecessary details. And at the same time, very beautiful and stylish.

  • Instructions
  • Case
  • Airpods 2 Headphones
  • Lightning charging cable

We open the box, on top is an envelope with instructions inside. The envelope contains three instructions. I will not retype what was written there.

Next, remove the envelope, inside is a case with headphones.

The case is made of beautiful white glossy plastic. The only thing, many people complain that scratches appear on it quickly. Therefore, whenever possible, you need to use carefully.

The lid of the case opens and closes with a magnet. Very easy to use.

On the outside of the case there is an indication of the charge of the case (a dot in the center). If lit green. the case is loaded, red. less than one full charge cycle left.

The headphones themselves are also kept in the case with magnets. Thanks to magnets, they do not fall out of their places.

Each earphone is in its own socket. If you want to put the left earphone into the jack from the right one, this will not work.

Despite the fact that my Airpods 2 support wireless charging, under the cardboard, but in which the case with the headphones lay in the recess, there is an Apple Lightning charging cable. The plug does not come with the cable (which is a pity).

The connection is absolutely simple. We take our phone and a case with headphones. Turn on Bluetooth in the phone. We open the case and the connection icon is immediately displayed on the phone screen. Press the “connect” button. Done! And no dancing with tambourines!

It is very convenient to see the charge level of the case and the headphones themselves together or separately. There are two ways:

  • Open the case in the immediate vicinity of the phone. A window with the charging level will pop up at the bottom of the screen.
  • Add the “Batteries” widget to the widget screen, opening by swiping to the left.
  • Change device name;
  • Customize each earphone (Siri, Start / Pause, Next track, Previous track, Off);
  • Turn on / off the auto-detect function of the ear (when you take the headphones out of your ears, the sound playback stops automatically, but if you insert the headphones into your ears, playback resumes);
  • Configure microphone.

Overview of pros and cons

So let’s take a look at all the pros and cons of Airpods 2 with wireless charging.

  • Stylish. Minimalist, but at the same time stylish design, like all Apple products.
  • Wireless. You are completely free in your actions within the range of the headphones.
  • Sound. The sound quality is excellent. Noise cancellation is most likely absent, but I’m not completely sure about it.
  • Microphone. The microphone quality is also excellent. I very much doubted that the interlocutor would hear me well. But she was wrong. When talking, noise cancellation is definitely present.
  • Easy connection and setup. The first time you use it, just a few touches and they are connected. Subsequent connections are made automatically when you open the case and put on the headphones.
  • Auto-detect ear function. Thanks to special sensors, playback stops when we remove the headphones, and playback is resumed when we put them back in.
  • Double touch function. Airpods recognize double-taps for convenient turning on / off music or switching tracks.
  • Operating time without recharging. Up to 5 hours of listening to audio and yes 3 hours of talk time.
  • Operating time with recharging in case. Up to 24 hours of audio listening and up to 18 hours of talk time.
  • Comfortable. They do not cause discomfort to the ears, but this is individual. Sits securely in your ears.
  • Fast charging of the case and the headphones themselves.
  • Wireless charging capability.
  • Price, but it’s Apple!
  • There is no volume control button.

I am very pleased with the purchase of these headphones. Now I do not feel sorry for the money spent on them. They are incredibly comfortable, fit securely in your ears, and there is no hint that they might fall out. The sound quality is excellent, for some it may not be very good, but it suits me.

I enjoy using Airpods 2! I recommend them for purchase if you have a desire and of course the opportunity.

Why and who needs them?

Good afternoon, dear readers!
This type of headphones, of course, made a splash when they were presented back in 2016. Everyone was shocked by both the simplicity and ease of use and their price tag, which bites hard. If we talk about Airpods 2, then they just replaced the 1st, bringing with them just a couple of new chips. However, let’s talk about everything in order.

Price. The price tag, in my opinion, of course, is too high, given that the headphones themselves are absolutely ordinary, almost the same (only with wires) supplied with the iPhone.

My purchase history for these headphones. Here I will try to present information that answers the question: “Why are they needed?” So, in fact, I will not say that I dreamed of these headphones for many years, the purchase was quite spontaneous. In general, I bought them in order to diversify my sports by listening to music or audiobooks. However, it is worth remembering that if you buy them for running, then the headphones may fall out of your ears, check them for this phenomenon before buying (you can try the usual wired ones from Apple). They are more convenient to use than wired ones, in almost any case, but whether you are ready to pay such a price, it is already necessary to decide individually.
You can use a simple formula, and divide the cost by the approximate number of times you will wear them, after that it sometimes becomes easier to think.

Equipment. Everything is packed in a beautiful minimalistic box, but the bundle itself is rather meager. Actually, the headphones themselves, documents and a wire to charge. Unfortunately, without the power supply itself.

Characteristics and differences from version 1. The differences here are minimal, and so much so that Apple released them even without a presentation, since there is absolutely nothing new to tell. If we abstract from the “newer and more perfect” processor, the headphones began to hold a charge a little longer, connect to devices became faster, and the “Hey Siri” function appeared, and now you can talk to it simply (without additional movements, but simply by saying ). Considering that the latter function is rather dubious, the headphones remained almost the same, only slightly better.

For convenience, you can choose the action that will occur after you “tap” 2 times on the left or right ear

The headphones sound average, perhaps some frequencies or volume will not be enough for someone. It is important to remember that these are not “fancy” headphones, but just the most ordinary ones, but without wires. Charging, by the way, is pretty good, I have enough for 3 days with average use.

Conclusion: the product is not bad, the price-quality ratio is controversial. You can find similar ones on the market, but cheaper. But if you have already formed this “system” of Apple technology, then these headphones will fit well into it.

Gauntlet 15 “MacBook Pro Attaché. compact laptop tank

At one time I actively used the SGP Dresden Klaus9i hard bag for iPad and I liked this format. Due to the rigidity of the structure, the accessory is very compact, while it is easy to remove and hide the tablet and other things. Something similar, but more functional, fell into my hands this time too. In particular, the Gauntlet 15 “MacBook Pro Attaché fits not only an iPad, but also a 15-inch MacBook Pro or, in my case, a Retina model, plus a host of other useful things.

In general, this accessory has literally become a lifesaver for me on my family vacation in Egypt. It so happened that Internet access was on the beach and in the near-beach area, at the reception in the central building of the hotel, but it was not in the room. Accordingly, the laptop constantly had to carry with you. Why use a laptop on vacation? To be honest, I can’t stupidly stick into the sun, sea and sand for a long time. I bought it, rolled it over, bought it again, fell under the sun again, and now it is possible to work. something like that. In addition, my wife and children usually slept during the day, I do not like to sleep during the day, respectively, I also spent time with benefit. I worked or trained at the local gym. And it happened that he combined everything together and in all cases helped out the Gauntlet 15 “MacBook Pro Attaché. With this accessory it is much more convenient to move around the territory than with a backpack. It is many times more compact and holds everything you need.

As I mentioned above, the bag is rigid, made of molded EVA material, covered with polyurethane on the outside, and inside finished with a soft cover, similar in appearance to that on the back of the EnRoute Strut Daypack and on the inside of the Crossover sling strap.

Her shape is not quite usual for this format of bags. Flat bottom but convex top. Due to the original internal design, a very spacious solution was obtained.

The outer polyurethane coating is complemented by a waterproof lock, which together made the Gauntlet 15 “MacBook Pro Attaché not only protected from accidental impacts, but also from bad weather.

It is worth noting that the lock is quite rigid, like any other with water resistance. You have to get used to this, but it does not cause any particular inconvenience. The bag is easy to unfasten both in the air and in the position on the table or on the knees. Although, from some users I heard complaints about the difficulty of sliding the dogs on the corners of the bag. I don’t have this problem, but if you buy such a bag, check on the spot how the lock works. I repeat. it closes tighter than usual, but this is normal. The main thing is that the runners in the corners do not catch anything.

A pair of nylon carrying handles are completed with a detachable shoulder strap. The handles are plump, soft and very comfortable.

How to Wind / Unwind iPhone Earpods with Paper Packaging (iPhone 7 / 8 / X / XS XS Plus)

The shoulder strap is made of stiffer nylon. The same is used in the strap handles of the Crossover 56L discussed above. The fittings are plastic, but I don’t see a problem with that. The exact same is used in the MixBag, which I have been actively using for more than six months, and there are no complaints. By the way, the length of the strap is independently adjustable on both sides, using a pair of staples.

This is probably the first shoulder bag I came across with a strap that is more than enough strap for a 190cm user. If you dissolve it to the maximum, then the accessory will hang somewhere below the level of my buttocks. As a result, I easily adjusted the belt to a comfortable level.

Inside the bag, the laptop is held in place by an elastic band:

There is also a padded Nylex section for the tablet:

But in fact, this part is also a separator between the laptop and the external department. The divider itself is made of pressed EVA and contains three elastic s on the back:

They are roomy enough for a smartphone, wallet, mouse and other similar little things. Behind the mesh, the laptop power supply and other useful things feel great, there is really a lot of space. Still, it’s not for nothing that Thule designers used a convex shape for the outer part. Also note that the divider is held in place by the nylon corners and will not fall on the laptop:

I placed an external battery, a box with vitamins, napkins in this part of the bag. The power supply did not carry, since there were no free sockets at the reception, he recharged the laptop from an external battery.

As a result, a fully loaded bag weighed more than three kilograms (add another kilogram of the accessory itself), and I carried it with me all the time, took it on excursions and dragged a lot around the territory. But the rings holding the belt did not break, the fittings did not deteriorate, and there is even no hint that there will be any problems with the belt or rather its fastening in the future. Note that the rings for the belt carabiners are located on different halves of the accessory on both sides of the lock. That is, if you unfasten the bag while it is suspended, it will not open in half, but will be held by a belt when folded.

Now for the most interesting and useful feature of the Gauntlet 15 “MacBook Pro Attaché on the go. Take a look at the screenshot below:

The bag is fully loaded, but it stands easily in this open position. Haven’t guessed yet what the catch is? Here’s another one

He worked in the same way at the airport and on the plane. The laptop is taken out from under the elastic band, lowered from above, opened that’s it, the laptop is ready for use. The entire structure can be folded and the bag can be zipped in a few seconds.

I suggest you get to know the accessory more clearly in the video review below:

Are there any downsides to this bag? To be honest, I personally did not find such for myself. This is one of the smallest bags for a 15-inch MacBook Pro and one of the most feature-packed. When traveling, if you constantly have to carry a laptop with you, this is an irreplaceable thing, except when there are too many things and it is more convenient to take a backpack.

Yes, there are, of course, features, although I can’t call them minuses. This is a pretty tough lock, but it’s better to be tough than a leaky one. It is quite difficult to take something out of the bag while it is on the weight with one hand, but it is possible. If you heavily load the department behind the divider, and even put in a full-size iPad, then when you fold the laptop and hide it under the tape, you will have to hold the top of the bag so that it does not fall, since there is a handle.

I am personally delighted with this product and can safely recommend it to owners of 15 “MacBooks. By the way, there is the same model for 13-inch Apple laptops.

Thule Crossover 56L Root Suitcase Bag

It so happened that on this trip I had to collect a lot of things on myself: a couple of gadgets for the test (you can read about them here and here), several jars with all kinds of sports food, a laptop bag from Thule (I’ll talk about it below), clothes. a tripod, plus family things that do not fit in a large suitcase. In my old bag from Caterpillar, which had helped out more than once before, there simply wasn’t enough space, and I really didn’t want to carry it in my hands. Also, it is soft, feared for gadgets. The backpack with equipment, which I take as hand luggage on the plane, is also not dimensionless, so I had to take risks and leave a couple of bulky boxes with electronics in the bag, which will go into the luggage.

READ  Bluetooth on iPhone won't turn on

Thus, instead of checked luggage on a family holiday trip, I took with me a larger newcomer, a 56-liter duffel bag or Duffel Bag. Thule Crossover 56L. It contained everything that needed to be accommodated, and there was also a place for souvenirs. over, in the process of filling this luggage, I calmed down somewhat for the relatively fragile things. The fact is that this accessory has a rigid frame, and this is a rarity for such a form factor. In addition, there are powerful casters and a telescopic handle, but first things first.

Younger son guards the bag

I’ll start with the design of the bag and why does it have such a powerful price tag (about 300), which I myself did not understand at first until I started to deal with this product. Like other Thule carry-ons in the Crossover range, including a sling and a 32-liter backpack, all hardware in the bag is aluminum. over, the frame mentioned above is also made of aluminum. As a result, even in case of impacts and falls, which often occur in an airport environment, things inside will not receive critical damage. Clothes don’t care, but we don’t just carry clothes with us. In my case, these were gadgets and accessories. Some also take tricky camping gear, etc.

In addition to the aluminum frame, there is also an exoskeleton, it is made of polypropylene, like the back skin. Due to all these elements, Crossover 56L actually received the reliability of a suitcase, but it looks like a bag.

Although the bottom is still more like a suitcase:

All the things located in it got safe and sound both to Egypt, where we flew with the whole family, and back, and they brought back a lot of all kinds of Egyptian stuff, including a fragile glass vase with sand. it arrived without any incidents or damage (though colored sand mixed, but the bag has nothing to do with it).

In general, the process of filling a bag is different from that of a traditional duffel bag. It has two large sections, and if you wish, they can be turned into one. Opening the top flap, you find yourself in the first section. Its bottom is a strong mesh:

But there is one more lock. along the perimeter of the bag. When you open it, you literally split the Thule Crossover 56L into two parts and you find yourself in the second section. Pay attention to the lock on the side of the net. It can be opened and the mesh completely collapsed, then there will be one huge section. Or, it’s easy to add extra things there without closing the bag.

It is advisable to put some fragile objects in the lower section, since this is the most rigid part of the accessory with a frame and exoskeleton. Inside it is trimmed with nylon, to the touch it resembles a raincoat. The same is used in backpacks and as experience has shown. it is strong, not easily soiled and practical.

Having hammered in the lower part, you can secure things with a pair of straps. This is convenient, since the bag is mostly used in an upright position, on wheels, and the straps do not allow things to bunch up or fall off some fragile objects. In addition, the net presses them well, if the department is tightly clogged. When I loaded this part of the bag and started to close it, I even feared that the mesh or the lock would not hold up. I had to make a decent effort in the closing process, and I didn’t want to redistribute things between departments, and I didn’t want to mix everything in a heap. But the accessory stoically withstood the test without damage, only the bottom of the upper section, that is, the mesh reared five centimeters, but it pressed things well in the lower section.

There is also another hard separator in the bag for small fragile items like glasses. It contains three pairs of glasses and an electronic thermometer. Not a single thing was harmed during the journey. By the way, there are similar sections in the Crossover 32L Backpack and EnRoute Strut Daypack, only in the bag it is much larger and can easily accommodate even ski goggles.

If the hard section is not needed during the current trip, then it can be removed so that it does not occupy the inner space of the bag.

There is also an original protection against accidental disclosure, made in the form of an elastic loop:

A small lock can be threaded into the slider for even greater security. There are also rings for a road lock in the sliders of the top flap and side zipper. There are two of them.

If we talk about the zippers themselves, although they are wire, they are reliable, strong and the runners walk easily, you can open with one hand, without much effort.

Liked the large amount of handles in the bag. In this kind of accessories, they are not superfluous. There is a pair of handles, traditional for duffel bags, with wide straps, twisted with a Velcro tape into a convenient roll:

There is a suitcase handle on the upper edge: tough, comfortable, keeps its shape, the hand does not cut and does not press:

A similar, but flatter handle is also present on the bottom edge, located between a pair of aluminum stops. A useful addition turned out to be useful when a heavy and full bag needs to be moved somewhere, be it a transporter at the airport or a luggage table in a hotel. She was especially useful when he hid the Crossover 56L in the luggage compartment under the seat on the train. The bag goes there one in one and there is still room on the side for a backpack or other luggage.

In addition, the volume of the bag can be adjusted using the four shoulder straps:

The outer cover is tough and very strong and also waterproof Dobby Nylon. It is also used in all other products in the Crossover line and has shown itself to be the best. It practically does not get dirty, and if it gets dusty, it can be easily cleaned, it is unrealistic to break it, it is pleasant to the touch.

The corners of the bag are reinforced, the lower, as I call it, the suitcase part also contains a pair of sturdy plastic runners at the upper corners and another in the center. There is a transparent for some kind of tag, for example, with the owner’s phone. Suddenly the luggage gets lost.

Wheels, no, not like that. the wheels in the bag are mighty. Any suitcase will envy. Our family one, which is three times larger than this bag, simply did not lie around, its wheels are two times smaller. But more important is not only and not so much the fact of size as the quality of performance and how this element behaves in real operation.

In this regard, there are no complaints. a very soft and smooth ride, and due to the size of the wheels, small cracks, curbs and other road troubles are not terrible. It is very easy to roll the bag, no matter how much you load into it. The same family suitcase loses a lot in terms of the experience of moving on wheels. A solid five-plus Thule points for such quality wheels.

No less important is the retractable handle. so as not to dangle, it can be easily removed and hidden. In this case, too, no complaints. The handle is comfortable, the structure is strong and, what is important, it is easy to remove and easy to remove. Pay attention to the aluminum tube on the side of the handle. this is a button to fold the structure, on the other side there is the same.

This is what a bag looks like with a fully open handle:

Its length is enough with a margin even for my 190 cm height. I think it will be fine for a 2-meter guy too. The telescopic structure is fixed on a pair of small pins:

For travel, the Thule Crossover 56L is a great option. For one person, its volume is enough for a trip for a couple of weeks, or even longer. Rigid aluminum frame, exoskeleton, great fittings, large, sturdy castors and handles on all sides, and a tough compartment for fragile items. A very thoughtful product turned out, although not without drawbacks, but there are few of them, or more precisely, I personally found only one during active operation. there are no additional external and internal s for all sorts of travel stuff. But if I take such a bag for long trips, then I also have a backpack with me, in which there is enough space for napkins, a bottle of water and other small things. The Thule Crossover 56L can be called a unique bag on wheels in the aggregate.

Thule Crossover 56L specifications:

  • External height: 64 cm
  • External length: 38 cm
  • External depth: 32.5 cm
  • Weight: 3.5KG
  • Capacity: 56 l

Review-study of bags Thule Crossover 56L and Gauntlet 15 ″ MacBook Pro Attaché. Adventure in hot countries

Any trip, especially air travel, is always exciting. It is even more severe if you first have to go to another city and then fly. Want more thrills? Take your children with you. Actually, I got this situation. the first flight in several years to hot countries on vacation with the whole family with two children. There were a lot of things, even a lot. As a result, everything did not fit into one large family suitcase on wheels, and I did not want to carry an additional bag in my hands. Remember. a trip, then a flight, then again a trip to the hotel, in general, and without a bag, there is enough tension in your hands. There was no second suitcase on wheels, but a couple of Thule accessories came to the theme. One of them. the Crossover 56L. helped a lot on the way, and the second. the Gauntlet 15 “MacBook Pro Attaché. was very useful on vacation due to the nature of my profession, which implies the ability to do work in any conditions, even at a resort. and access to the Internet. The experience turned out to be amusing. I will talk about it in this article.

Roman Yuriev

Meticulous blogger, gadget addict, bald and bearded fitness methodologist. My hobbies are technology, sports and nutrition.

Possible connection problems

What difficulties a user can face when connecting headphones, and how they can be overcome?

  • Airpods not connecting? Make sure your headphones are charged. When the battery level is low, the headset beeps. To recharge, you need to connect the case with headphones to a charger or USB port using a Lightning cable.
  • Settings interface doesn’t appear? Try to close the case with the headphones, wait 10-15 seconds and open it again. The indicator should flash white.
  • Not syncing with iCloud? You need to exit the program, and then log back in using your login password.
  • Not connecting on Mac? Turn off and then turn on the Bluetooth module via the icon in the menu bar.

A universal method that will help solve most of the problems is to reset the headphones themselves. To do this, on the Apple gadget, go to the Bluetooth section, click on “Forget this device”. We put the headphones in the case. We are waiting for 15 seconds. Now you need to open the lid and press the round button on the box. The indicator should flash amber a couple of times, then turn white.

Initial settings

You can leave the factory “tuning” unchanged and immediately start using the headset, or you can still change something for yourself.

For individual headphone settings, do the following manipulations:

  • go to “Settings”;
  • go to bluetooth;
  • click on Airpods.

How to connect Airpods to iPhone, iPad, Mac, Apple Watch

To begin with, it is worth talking about a few nuances that users need to know. wireless “droplets” are compatible with gadgets from Apple only if the latter support:

  • smartphones, players and tablets. iOS version 10;
  • Smart watches. watchOS version 3;
  • laptops. macOS from Sierra and later.

This concludes the introductory part. You can proceed to the process of how to connect Airpods headphones to iPhone, MacBook and other devices from Apple.

  • First you need to unlock the device and open the case with headphones;
  • Then you need to place the box next to the device;
  • After that, information on the ability to customize Airpods will appear on the iPhone screen;
  • Further, everything will be clear intuitively.

If the device is already logged into iCloud, then no additional manipulations are required. The headset will automatically adjust to work with compatible accessories. The main thing is not to forget to open the case with the headphones, otherwise nothing will work.

Headphone control features

  • remove one “ear”. playback is paused;
  • remove both headphones. playback is completely disabled.

Connect and use Airpods. 5 steps to set up

Airpods are stylish wireless headphones that work perfectly with all gadgets of the “apple” family. With their help, you can not only, in fact, listen to music, but also give commands to Siri, answer phone calls and much more. But is it possible to connect Airpods, for example, to a computer on Windows or an Android device? Of course, you can, if you know how to do it correctly. This and other features of the already legendary “earbuds” will be discussed further. Let’s explore from “A” to “Z” how to control these headphones.!

How to answer a call?

You can answer through a double tap on the central part of any earphone. Or, if the user has changed this option in the settings, on the left or right “ear”. Each earphone here also performs the function of a microphone.

How to connect Airpods to Android device

If there are no “apple” gadgets. no problem! Airpods can be used seamlessly with devices manufactured by other companies.

How to link Airpods to Android devices:

  • place the headphones in the case, while leaving the latter open;
  • on the case of the box, press and hold the button until the indicator glows white;
  • on a smart go to the Bluetooth section, find and connect to Airpods.

Nuances: the option to stop the melody does not work with Android if you remove 1 earpiece from your ear; Siri launch is not activated. You can add functionality by downloading and installing utilities on the gadget, for example, AirBattery.

NNCXV.INFO 2021