How To Get The Cartridge Out Of The Canon Printer

The SIMplest, with a hard carriage stop

When turning on the printer, or during printing, open the cover and stop the carriage movement by hand. This must be done quickly, before the carriage reaches the parking spot. During switching on, it is more convenient to do this. the test movement of the carriage is performed slowly and the chances of scratching into the plastic are minimal.

The printer displays a paper jam message.

Place the carriage in the replacement position, so that the cartridge, which needs to be pulled out, is opposite the blue button.

How To Get The Cartridge Out Of The Canon Printer

Press down on the lever at the top of the carriage (by the blue button) and remove the cartridge. It will be possible to take out only the color above which the blue latch is currently located.

All actions can be performed to turn on the printer, but in the end you will have to reboot to clear the jam error.

Removing the cartridge from the Canon inkjet printer

The most popular are the company’s inkjet products. Yes, sometimes they are more expensive and print slower, but they allow you to make documents in color using several types of inks. How to remove such an inkwell, you can find out from Step 1 and Step 2, Having read our other article at the link below, we will analyze only the main difficulties.

  • Follow the steps after the printer has been turned on and the cartridge retention movement has finished. If it gets stuck half way, you need to restart your device.
  • Make sure you pull the individual ink bottle holder fully up or down as it may interfere with removal.

Pay attention to the instructions for the equipment. It clearly indicates in which direction the component should be dragged.

If the cartridge is halfway stuck, put it back in and carefully, in accordance with the manual, try to remove.

In most cases, the user is able to solve the problem with the extraction himself. However, if you have tried all the tips and nothing helps, we strongly advise you to use the services of professionals, because your further actions may lead to breakage of contacts or the ink tank itself.

Now that the cartridge has been removed, you can start replacing, refilling or cleaning it. In our second materials, the links below provide you with detailed guides on this topic. They will help you cope with the task without any difficulties.

This concludes the article. We hope the tips were helpful and you still managed to get the ink tank out of the printer at home. When performing this procedure, carefully Read not only our recommendations, but also look into the instructions that came with your Canon product.

Thank the author, share the article on social networks.

In new office printers and Canon MAXIFY MFPs, the carriage with cartridges moves to the place of replacement only after the ink is completely empty. If you want to take out and replace the ink tank at 50% of the counter level, this cannot be done in the usual way. However, sometimes it is necessary to remove it, especially when using refilled original cartridges, CISS or CISS for Maxify, because the ink level in this case is displayed incorrectly (when the cartridge actually finished, the counter may be only in the middle, and vice versa). It should be borne in mind that the CZK and CISS chips can zero the level even during the printing process. And the refilled originals, after turning off the counter with the CANCEL button, will ask for replacement only when they fail.

For use with:

Removal instructions for PGI-1400 / PGI-2400 cartridges are suitable for MB2040, MB2340, IB4040, MB5040, MB5340, MB2140, MB2740, MB5140, MB4540, iB4140, MB2050, MB2350, IB4050, MB5050, MB5350. All actions on this manual you do at your own risk and responsibility. The actions described are NOT recommended by the manufacturer (Canon), they are not covered by the warranty, be careful.

Why remove a cartridge from a Canon printer?

Immediately, we note that there are a number of situations when it becomes necessary to remove the cartridge:

  • Toner is used up or ink is dry;
  • The paper is jammed in the output tray;
  • Gave a print error;
  • The printing process is not correct;
  • Blots, streaks, and streaks appear on the printed document.
READ  Samsung Printer Print From Phone

Move from the parking spot

Turn off the printer in the usual way, with the button. The carriage is in the “parked” position at rest. Open the printer cover.

Push the carriage all the way to the right.

There are white gears on the left side of the printer, turn the one on the metal shaft (farthest) about one turn. The direction of twisting is shown in the photo.

Try rolling the carriage into the printer (if it does not roll out, repeat steps 2 and 3).

Roll the top gear toward you until it clicks to unlock the cartridge eject button. The direction of movement of the gear is indicated by a green arrow.

Roll the carriage to the position of replacement of a specific cartridge, and press the blue button to remove the cartridge.

How to remove a cartridge from a Canon inkjet printer?

Removing Canon ink cartridges begins with the standard power-on of the printer, but the following steps must be performed in the recommended order:

  • Open the sheet feeding tray, and also open the output flow compartment.
  • Removing any paper in the tray.
  • We open the technological compartment, at this time the carriage begins to smoothly go from the parking compartment to the service window. Attention! It is prohibited to obstruct its movement in any way.
  • Then the latch will open and the cartridge can be removed freely. But do not forget to exclude any contact with the encoder tape, which is intended to ensure the correct position of the carriage. Removing this mechanism from the working state will entail expensive repairs.

On a note! The cartridges are removed only when urgently needed, because long-term storage outside the parking space negatively affects the technical parameters of consumables.

In case of mistakes

Periodically, after removing or replacing cartridges in the second way, after turning on the printer gives an error and DOES NOT move the carriage. In this case, repeat the steps in the reverse order: turn off the device, turn the white gears again and carefully slide the carriage into the parking lot until it stops. The error will most likely disappear after re-enabling.

How to remove a cartridge from a Canon laser printer?

To remove the laser cartridge, you must turn on the printer itself, wait for it to warm up and start the Removal procedure:

  • Remove the paper tray (this step is to be performed for the entire Canon lineup).
  • Raise the outlet caps.
  • Open the compartment of the technological department.
  • While holding the cartridge with special locks, turn it over and pull it out by the handles with smooth movements until it is completely removed.

The removed cartridges must be handed over to the Miraxprint service center or call our master, who will come to you anywhere in Moscow 24/7!

Sooner or later, almost every owner of a Canon printing device will face the task of removing the cartridge from the printer. It may need to be refilled, replaced or cleaned. In most cases, everything goes without any difficulties, but sometimes difficulties arise when trying to get an inkwell. Exactly how to avoid and solve them, and will be discussed further.

In case of mistakes

Periodically, after removing or replacing cartridges in the second way, after turning on the printer gives an error and DOES NOT move the carriage. In this case, repeat the steps in the reverse order: turn off the device, turn the white gears again and carefully slide the carriage into the parking lot until it stops. The error will most likely disappear after re-enabling.

The SIMplest, with a hard carriage stop

When turning on the printer, or during printing, open the cover and stop the carriage movement by hand. This must be done quickly, before the carriage reaches the parking spot. During switching on, it is more convenient to do this. the test movement of the carriage is performed slowly and the chances of scratching into the plastic are minimal.

The printer displays a paper jam message.

Place the carriage in the replacement position, so that the cartridge, which needs to be pulled out, is opposite the blue button.

Press down on the lever at the top of the carriage (by the blue button) and remove the cartridge. It will be possible to take out only the color above which the blue latch is currently located.

All actions can be performed to turn on the printer, but in the end you will have to reboot to clear the jam error.

READ  How To Refill A Cartridge For A Canon Printer Yourself

Removing the bar

After point 5 in the previous method, you can take additional steps and make removing the cartridges easier.

There is a special part on top that covers the upper part of the carriage, it is held by two latches. If you press the latches, then this bar is removed by itself.

In the absence of a bar, you will not need to use the blue button and roll the carriage to the replacement position of a specific cartridge. The cartridges will be removed by pressing directly on the levers at the top of the carriage (indicated by red arrows below).

By the way, only Using method 3, you can remove the print head on Maxify series devices.

Move from the parking spot

Turn off the printer in the usual way, with the button. The carriage is in the “parked” position at rest. Open the printer cover.

Push the carriage all the way to the right.

There are white gears on the left side of the printer, turn the one on the metal shaft (farthest) about one turn. The direction of twisting is shown in the photo.

Try rolling the carriage into the printer (if it does not roll out, repeat steps 2 and 3).

Roll the top gear toward you until it clicks to unlock the cartridge eject button. The direction of movement of the gear is indicated by a green arrow.

Roll the carriage to the position of replacement of a specific cartridge, and press the blue button to remove the cartridge.

Removing the cartridge from the Canon laser printer

As you know, printers are divided into two types. laser and inkjet. You can read more about their difference in our other material at the link below. We will start with the analysis of removing the cartridge from the laser printer, and then talk about the possible difficulties.

The equipment manufacturer recommends removing jewelry from hands to avoid injury. In addition, it is not necessary to Make great efforts, all actions must be careful. First you need to do the following:

  • Turn off the device and unplug it.
  • Lift the top cover if your printer has one.

Now take out the cartridge by SIMply pulling the handle.

Usually there is nothing complicated in this procedure. Laser peripheral ink tanks have a slightly specific design, so you can only try to lead the component from side to side and smoothly remove it from the connector. In addition, we advise you to check the insides for foreign objects, it is possible that a paper clip accidentally got inside prevents you from pulling out the cartridge. If such actions did not bring the desired result, it remains only to seek help from a specialist.

Why remove a cartridge from a Canon printer?

Immediately, we note that there are a number of situations when it becomes necessary to remove the cartridge:

  • Toner is used up or ink is dry;
  • The paper is jammed in the output tray;
  • Gave a print error;
  • The printing process is not correct;
  • Blots, streaks, and streaks appear on the printed document.

How to remove a cartridge from a Canon laser printer?

To remove the laser cartridge, you must turn on the printer itself, wait for it to warm up and start the Removal procedure:

  • Remove the paper tray (this step is to be performed for the entire Canon lineup).
  • Raise the outlet caps.
  • Open the compartment of the technological department.
  • While holding the cartridge with special locks, turn it over and pull it out by the handles with smooth movements until it is completely removed.

The removed cartridges must be handed over to the Miraxprint service center or call our master, who will come to you anywhere in Moscow 24/7!

Sooner or later, almost every owner of a Canon printing device will face the task of removing the cartridge from the printer. It may need to be refilled, replaced or cleaned. In most cases, everything goes without any difficulties, but sometimes difficulties arise when trying to get an inkwell. Exactly how to avoid and solve them, and will be discussed further.

How to remove a cartridge from a Canon inkjet printer?

Removing Canon ink cartridges begins with the standard power-on of the printer, but the following steps must be performed in the recommended order:

  • Open the sheet feeding tray, and also open the output flow compartment.
  • Removing any paper in the tray.
  • We open the technological compartment, at this time the carriage begins to smoothly go from the parking compartment to the service window. Attention! It is prohibited to obstruct its movement in any way.
  • Then the latch will open and the cartridge can be removed freely. But do not forget to exclude any contact with the encoder tape, which is intended to ensure the correct position of the carriage. Removing this mechanism from the working state will entail expensive repairs.
READ  How To Print To A Printer Via A Cord

On a note! The cartridges are removed only when urgently needed, because long-term storage outside the parking space negatively affects the technical parameters of consumables.

How do I remove an empty cartridge from an Epson printer? |

As with any other inkjet printers, Epson cartridges run dry. Therefore, from time to time you must replace empty cartridges. Modern Epson inkjet printers use multi-color cartridges in addition to the black cartridge.

In most cases, the product will not work if even one cartridge is out of ink. Replacing an Epson ink cartridge is not that difficult. However, before you can install a new cartridge, you must first carefully remove the empty.

Turn on your Epson printer. Make sure the power light is on but not flashing.

  • As with any other inkjet printer, Epson cartridges run dry.
  • In most cases, the device will not work if even one cartridge is out of ink.

Remove the paper tray from the printer and set it aside. Open the printer cover from the top or front of the device to open the ink tray and print head. On conventional inkjet printers, the cover is on the top of the printer, just in front of the output bin. For Epson multifunction printers: open the latch on the left side of the device to open the scanner and expose the cartridges.

Press the Ink button on the front of your Epson printer. The Ink button has a small teardrop icon at the top or bottom. Depending on your Epson printer model, wait for the ink tray to slide to the left and stop in the middle of the slot. Do not press the Ink button for more than three seconds, otherwise the cartridge tray will move and the printer will start cleaning the cartridge.

  • Remove the paper tray from the printer and set it aside.
  • Open the printer cover on the top or front of the device to open the ink tray and print head.

Using your thumb and forefinger or middle finger, press down on the tabs on the ink cartridge that you want to remove. Lift the ink cartridge straight up and remove it from the ink cartridge tray. Set the empty cartridge aside. Some Epson cartridges have only one tab on the upper rear edge of the cartridge. Second cartridges have tabs on the leading and trailing edges.

Remove the new ink cartridge from its packaging and align it in the same compartment from which you removed the empty one. Insert the cartridge straight into the slot in the cartridge tray until it snaps into place. To avoid damage to the ink cartridge tray Do not press too hard when installing a new ink cartridge.

  • Use your thumb and forefinger or middle finger to press down on the tabs on the ink cartridge that you want to remove.

Close the printer cover and press the Ink button. Wait for the Epson printer to charge and initialize a new ink cartridge. The Ink and Power button lights blink while charging and turn off when the printer is ready to use. Once the lights stop flashing, you can use your Epson printer as usual.

Reasons for extraction

  • When the ink in the cartridge is low, but still has enough to print for a while, you will see a warning. When toner or ink runs out, this will be reflected in the quality of the printouts. And some models may even start to issue errors and block the operation of the device.
  • It happens that the printer itself starts to junk and refuses to print. One option to resume work would be to remove and install the cartridge. Less commonly, it helps with chip problems. But, most likely, the latter will have to be replaced with a new one or reset to zero.

How to remove a cartridge from a printer Canon, HP, Brother, Epson, Xerox, Kyocera, Pantum, Samsung

If you do not know how to remove the cartridge from the printer, then this article is for such situations. Note that for a laser device you need to remove the “consumable”, and remove from the inkjet. This difference is really important, it should be taken into account so as not to damage the device itself. This instruction will show the extraction steps for any known manufacturer’s technique. The recommendations were successfully tested on the following models: HP laserjet (m1132 all-in-one printer and p1102), Samsung (scx 3400, 3200), Canon (pixma mg3640, mf3010, mg2440), Pantum m6500, Xerox workcentre 3045.