How To Insert A Cartridge Into A Canon Printer

Canon Pixma MG2540 Printer Cartridge Replacement

Replacement

If ink runs out or other errors occur during printing, the Ink Lamp and Alarm lamp blink orange to indicate an error. Count the number of flashes of the indicator and take the desired action. If an error occurs

Replacement procedure

To replace, follow these steps.

DO NOT touch the electrical contacts (A) or printhead nozzles (B). The product may not print correctly if touched.

How To Insert A Cartridge Into A Canon Printer

Replace it immediately after removal. Don’t leave your device without it.

Use a new one for replacement. Installing a used one may clog the nozzles.

Also, with it, the device will NOT be able to PROVIDE the correct information when a replacement is needed.

After setting, do not remove it from the device and DO NOT leave it reinstalled, the device will malfunction. Use up page within six months of first use to get the best print quality.

If you run out of ink, you can continue to print for some time with only black or color, which retains ink. However, this will result in lower print quality compared to printing with two. For optimum performance, it is recommended to use new ones. Even when printing with one type of ink, NOT Removing blank. Missing color or black causes an error and stops printing in the device.

Color ink may be consumed even when printing a black and white document or choosing black and white printing.

Both color and black ink are also consumed during standard and deep cleaning of the printheads, which may be necessary to keep the product operating. If it runs out of ink, replace it with a new one immediately.

Make sure the power is on.

Fold the Paper Output Tray and the Optional Paper Output Tray.

Open the lid.

The holder moves to the replacement position.

DO NOT try to stop or move the holder by hand. DO NOT touch the holder to its complete stop.

The inside of the product may be stained with ink. When replacing, be careful not to get your hands or clothing dirty. Ink can be easily removed from the inside of the machine using paper towels, etc. DO NOT touch metal or other parts of the machine.

If the lid is left open for more than 10 minutes, the holder may move. The Alarm lamp will light up. In this case, close the cover and then open it again.

Extract empty. (1) Press it all the way down (you should hear a click).

Be careful when performing operations so as not to stain clothing or the surrounding area. Buy cartridges (purchase, purchase of printer cartridges, price, purchase of expired ones, We buy out with expired dates).

Dispose of empty in accordance with local laws and regulations for the disposal of consumables.

Prepare a new one.

(1) Take a new one out of the package and carefully remove the protective tape (C).

Shaking may cause ink to spill and stain your hands and the surrounding area. Handle with care.

Caution: Ink on the removed seal may stain your hands and the surrounding area.

DO NOT touch electrical contacts or printhead nozzles. The product may not print correctly if touched.

Install it.

(1) Insert a new one at an angle into the holder.

Color should be installed in the left slot and black in the right.

Install it carefully so that it does not touch the electrical contacts on the holder.

(2) Press down firmly until it locks.

Check if installed correctly.

The product will not print unless color and black are installed. Make sure to install both.

Close the lid.

If the Alarm lamp is on or flashing after closing the cover, take appropriate action.

If an error occurs

The device may make noise during operation.

Adjusting the position of the printheads.

During alignment, the device automatically cleans the printhead to print a printhead alignment pattern. DO NOT perform any other operations before the printhead cleaning is complete.

How to insert a cartridge into a Canon printer

Printers are in most personal computer users, today Canon printers are very practical and convenient Not only in offices, but also at home. These devices have very good usability and functionality.

Canon printers, thanks to their versatility, are very much in demand and relevant today. Thanks to modern technology, in modern printers it is possible to print photos or texts on almost any type of paper. But the problem is that the volume of cartridges for the printer is not very large, and often there is a need to either purchase a new cartridge, or go and refill your old one and reinsert it in its usual place.

The process of installing the cartridge is actually NOT difficult at all, although at first glance it may seem that inexperienced users will NOT be able to do this. If you have skills in computer technology, and you are good at computer, then it will be too easy for you. You can very easily, independently perform SIMple manipulations, as a result of which you can put the cartridge in the right place in the printer. But still, if you are afraid to take risks, it would be better to go to a good specialist, who is engaged in the repair and maintenance of modern technology.

The printer is an indispensable device in the office, and for some users and at home. But sooner or later the ink in the cartridge runs out, as evidenced by a faint print or no picture at all on a sheet of paper. In order to replace it, you can call specialists. However, in fact, this is a fairly SIMple operation that can be easily dealt with even by someone who has no special relationship to technical devices. Of course, you can answer that you do not know how to insert the cartridge into a Canon printer or another model of the device. But this is not as difficult as it seems. Almost every printing device has an instruction in which this process is described in some detail. But if for any reason you lost this valuable book, then use the following recommendations. First, open the front cover of the printer and remove the used cartridge. To do this, gently pull on the special part of the device. Remember that any use of force in this case is unacceptable, as it can lead to disastrous consequences. On some printer models, press down lightly on the cartridge with a click, and then gently pull it out.

How to insert a cartridge into a Canon printer

The used cartridge should be placed in a bag and disposed of. The latter must be done separately from household waste. Now you need to understand how to insert a Canon cartridge into the printer. First, release it from the packaging. To do this, remove the protective tape and cover from it. Shake the toner cartridge from side to side several times before installing. At the same time, hold it firmly with both hands. The toner cartridge must be installed in the photo drum immediately after you remove the protective cover. Installs this printer consumable along the guide rails. The cartridge slides gently into the printer. No effort should be made. The part must free the floor on the rails and move. As a result, after installing the cartridge in place in almost all printer models, you can hear a quiet click. Then close the front cover.

READ  How To Connect A Printer Via Canon Network

How to insert a Canon cartridge into the printer

Toner cartridge

You can pay 30-50% less for light, depending on what kind of electrical appliances you use.

Canon i-SENSYS LBP7010C (7018C) color laser printers use multi-pass printing technology and, in addition to four blocks with toner, the design includes a drum cartridge, which is a drum with a cleaning system. If you open the top cover, you can only access the toner cartridges. In addition, only one of them is accessible, the rest are located in the depths of the device. Using the “Paper” button on the control panel. press and hold for 2 seconds. the printer is put into cartridge replacement mode. The Paper light is on and the toner light for the color of the container ready to be replaced is blinking.

When the button is pressed once again, the cartridges move and all lights flash. Do not open the printer cover at this time. When the transfer operation is complete, one of the lights keeps blinking to indicate which of the toner cartridges can be removed. So each of the blocks is sequentially transferred to an accessible position. Replacement is carried out in the same way and the cartridge of the color of the toner, opposite to the designation of which the indicator flashes, is installed in place. To take the printer out of this mode, press and hold the “Paper” key again for 2 seconds. At the end of the article Visual instructions for removing toner cartridges from the Canon i-SENSYS LBP7010C printer.

Monochrome Laser Printers

Perhaps the easiest way to get a monochrome printer is a laser cartridge, it doesn’t even require a network connection. The main thing here is to get to the very detail. For printers with a paper tray at the bottom, lift up the top cover (often made of translucent plastic) that receives the printed pages. Then open the second one that covers the internal mechanism of the device. This lid has a small notch (it can be located either on the left or on the right), under which you can easily slip your fingertips.

Some Canon printer models, such as the LBP810, load paper from the top. In such a printer, the cartridge is usually placed behind a cover located on the front of the housing. It is necessary to pull it towards you and fold it down.

The path is now clear and the cartridge can be easily pulled out by the handle.

A bias is possible, and in order to avoid breakage, it is better to make a second attempt. When the cartridge is brought straight to the guides, it practically falls into its intended place. The final stage: press to a characteristic click, so that the contacts are in place.

How to change cartridge in all types of Canon printers

There is enough ink or toner to print a certain number of pages, and then every printer owner is faced with the need to change or refill the cartridge. Therefore, you need to be able to extract it and install it back. The design of different models of Canon printing equipment differs from each other, but individual units have much in common.

Drum cartridge

The unit is also called a copy cartridge. Although its resource is 7000 pages, restoration or replacement will still be required.

Store the drum cartridge only in opaque packaging and should not be exposed to direct sunlight or strong light. To get the block, you need to sequentially do the following operations:

  • Close the sub tray and open the printer cover;
  • Remove the top of the MP tray and remove the paper;
  • Open the front cover;
  • Raise the levers on both sides to unlock;
  • Pull the drum cartridge out by the handle.

Laser Color Printers

The location and design of cartridges depends on the technology used in a particular device. For example, the Canon i-SENSYS LBP7110Cw printer operates on the Single Pass method and includes four SEPARATE print engines. The cartridges are located one after the other in a specially designed tray. Their replacement is carried out as follows:

  • Pull and lower the cover on the front of the device;
  • Pull the block out by the handle;
  • Get out the cartridge that needs refilling;
  • Install complete.

Inkjet Printing Technique

Here you cannot do without turning on the device, since the cartridges are located in the parking area and are not available for removal. After pressing the ON button, you need to wait until the printer is ready for use (indicator is on) and open the cover. The carriage moves to the cartridge replacement position.

It should be noted that the instruction manuals for Canon devices do not recommend turning off the printer. over, on the first pages of the user manual there is a warning that when the power indicator is on or flashing, the cord cannot be disconnected. However, if you press the ON button now, the carriage will move back to the parking area. The only way to power off the printer is to unplug the power cord.

Cartridges may have tabs that you need to push. Or, the carriage has covers that secure the ink tanks in position and must be lifted. If there is no lever, it is enough just to pull the cartridge yourself and remove it from the slot. Reinstallation takes place in reverse order:

Replacing the cartridge

Cartridges are both original and non-original. Non-original ones are cheaper, but they may not print as clearly as the original ones, and they can also Riot salesmen. Also, you can not buy cartridges, but refill old ones, it will come out much cheaper. It all depends solely on your tasks and budget.

So, the cartridge is in your hands. Take it out of the box, but do not rush to remove it from the plastic packaging. The fact is that the ink can get stuck in the Tonner, and this will affect the print quality. Take it in your hands and shake it a little.

This way you distribute the toner evenly in the cartridge. By NOT doing this on the printout, you might think that the cartridge is bad, when in fact it is okay. Now you can pull it out of the plastic. Remove the protective film (colored tab) from the bottom. Be careful not to touch the print head itself during this operation. Small spots on the print lead to significant print deterioration. Even if you lightly touch it, wipe it off with a cloth.

The cartridge is ready. It can now be inserted into the printer. Put it in the cell and lock in place. In a printer that has a stop mechanism, make sure the cartridge is firmly inserted. This will be indicated by a characteristic click when pressed.

After you have verified that everything is in order, you can close the printer cover.

Perhaps an instruction on how to change the cartridge will help you. This shows the process of replacing a toner cartridge in a laser in an HP printer.

And that’s replacing the cartridge in HP inkjet printers.

Some subtleties

The most important feature in the repair or maintenance of any equipment is the difference in the device of different models. Printers in this regard are no exception, therefore, both removal and insertion of cartridges should be carried out as written in the instructions. If you have instructions, or it is lost somewhere, then look at the brand and model of the printer and find all the necessary information on the network. Only after studying it will you be able to know exactly how to actually remove the cartridge correctly. And then reinsert it exactly on your printer model.

Find out the manufacturer and model of the printer

Before changing a cartridge, you need to find out which printer model you have and which cartridges are suitable for it. As mentioned above, different cartridges are suitable for different printers. Write down the manufacturer and model of the printer.

READ  The Printer Writes No Toner And The Cartridge Is Full

Usually the name is on the device itself (see the picture above). If the printer model is listed on the front of the device, there is always information on the back of the technical data label in the printer. Otherwise, you can see detailed information in the instruction book.

Also, if the printer is already installed on a computer or laptop, then you can press # 171; Start # 187; # 8212; # 171; Devices and Printers # 187; and see the name of the installed printer there.

Now that we know the model, you can drive the phrase into Yandex search; printer cartridge printer model # 187; and find which cartridge is right for you. But it’s better to make sure by looking at it with your own eyes.

How to replace an empty cartridge

The ink in inkjet cartridges sooner or later run out. What should you do then? Call a special master, pay him to make a replacement? What for? You yourself can replace the cartridge of your printer, read this manual!

Write down the manufacturer (HP, Epson, Canon, etc.) and your printer model on paper. This information is contained in the documentation for the device or on a special label on the back of it.

Turn on the printer and open the cover that covers the cartridges. They are a block that slides towards the center of the print area.

Pull out the empty cartridge carefully. To do this, take it with your hand at the top and pull it up at an angle from the attachment point.

Write down the number and type of cartridge (s).

Remove the packaging from the new cartridge and remove the adhesive tape that covers its metal surface on one side.

Insert the cartridge this side straight into the holder and lock it in place.

Close the cover and print a test page. Make sure everything is ok.

Congratulations! You just replaced your inkjet cartridge yourself and saved money!

Finally, a little visual on how to replace a cartridge in an HP printer.

How to insert the cartridge into the printer correctly?

The need to insert the cartridge into the printer arises in the following cases:

  • When buying a new or used printer, if the cartridges are not inserted into It;
  • Out of ink;
  • The paint is dry;
  • You are not satisfied with the print quality and want to replace the cartridge with another one with better ink quality.

If you took out a cartridge with dried ink and tried to “soak” it, then after that you will need to insert it back into the printer, or purchase a new cartridge with color and black ink and insert it already. The wrong approach to installation can lead to malfunctions of the printer and software, and also will not allow you to achieve the desired print quality.

How to get the cartridge?

In most cases, it is enough to open the front cover, find the desired cartridge (color or black) and pull on the special tab to remove it. It is worth remembering that when working with any printing technique, the use of force is unacceptable. Therefore, if you cannot remove the device without great physical effort, then you are most likely doing something wrong. Refer to the instructions or consult with a specialist so that replacing ink does not turn into a printer breakdown for you.

It is usually not difficult to insert the cartridge into the printer either. You just need to place it in the printhead and press a little until it clicks, which will mean the cartridge is locked.

After that, you need to go into the program installed for the printer and select the “Maintenance” tab or SIMilar. Here you can reset the ink level, which will allow you to adjust the operation of the printer, which will again determine the level of black or color ink, and if it is critical, it will notify you that the ink is already low and it is worth preparing to replace the cartridge.

How to insert the cartridge into the printer correctly. Computer tips

Preparing to install the cartridge

Preparation consists in repairing a dried cartridge or buying a new one. In addition, you need to initially turn on the computer, connect a printer to it (if this is NOT done, for example, when buying new equipment), install the software.

After you have turned on the printer, you need to wait a few seconds until the print head is in the standard position. Then you can remove the black or color ink cartridge. Do not pull too hard, so as NOT to damage anything. In most models, extraction is quite SIMple, but in SEPARATE cases special locks or restraining structures may be provided.

Therefore, before proceeding with the extraction, you should read in detail the instructions for the printer or contact specialists for help.

Selecting the cartridge to use

Sometimes users do not have the opportunity to immediately replace the cartridge or it becomes necessary to print with only one color. In this case, you should indicate to the periphery what paint he needs to use. This is done through the built-in software:

    Open the “Control Panel” menu via “Start”.

Go to the “Devices and Printers” section.

Find your Canon product, right-click on it and select “Print Settings”.

In the window that opens, find the “Maintenance” tab.

Click on the “Cartridge Options” tool.

Select the required ink tank for printing and Confirm the action by clicking on “OK”.

Now you need to reboot the device and you can proceed to print the required documents. If you DO NOT find your printer in the list when trying this step, please refer to the article in the link below. In it you will find instructions on how to correct this situation.

Sometimes it happens that new cartridges have been stored for too long or have been exposed to the external environment. This often causes the nozzle to dry out. There are several ways how you can restore the work of a component, adjusted the paint supply. Read more about this in our other material.

This concludes our article. You have been introduced to the procedure for installing a cartridge in a Canon printer. As you can see, everything is done in just a few steps, and this task will not be difficult even for an inexperienced user.

Thank the author, share the article on social networks.

Installing a cartridge after refueling or buying a new one is a procedure that many users are forced to do on their own. This is NOT a difficult action at all, even a beginner can handle it. But inexperienced users raise a number of questions about this. Consider how to properly change the cartridge in an inkjet or laser printing device.

Insert the cartridge into the Canon printer

The need for replacement is required when stripes appear on the finished sheets, the picture becomes indistinct, or one of the colors is missing. In addition, the end of ink can be indicated by a notification displayed on the computer when trying to send a document to print. After purchasing a new ink tank, you need to follow the instructions below.

If you are faced with the appearance of streaks on the letter, this does NOT mean that the ink has begun to run out. There are a number of other reasons for their occurrence. Detailed information on this topic can be found in the material at the following link.

How to install a filled container

You need to carefully take a full tank and place it where it was previously. Install in a click. The next step is to turn on a “cleaning cycle”. getting good print quality. Then the equipment can be considered ready for operation. This way you can refill the cartridge yourself, saving time and money on going to the workshop.

Removing a depleted cartridge

First of all, you should remove the empty container in the place of which a new one will be installed. This is done literally in a few steps, and the procedure looks like this:

  • Turn on the power and start the printer. It is not necessary to connect to a PC.
  • Open the side cover and paper output tray, which is directly behind it.
READ  Windows Does Not See The Printer What To Do

Press down on the ink bottle holder so that it drops down and makes a characteristic click.

Remove empty container and discard. Be careful, as there may still be paint in there. It is best to carry out all activities with gloves.

We recommend that you install the cartridge as soon as you remove the old one. In addition, do not use equipment without an ink tank.

Removing a depleted cartridge

First of all, you should remove the empty container in the place of which a new one will be installed. This is done literally in a few steps, and the procedure looks like this:

  • Turn on the power and start the printer. It is not necessary to connect to a PC.
  • Open the side cover and paper output tray, which is directly behind it.

Press down on the ink bottle holder so that it drops down and makes a characteristic click.

Remove empty container and discard. Be careful, as there may still be paint in there. It is best to carry out all activities with gloves.

We recommend that you install the cartridge as soon as you remove the old one. In addition, do not use equipment without an ink tank.

Step-by-step instructions on how to insert the cartridge into the device

There are two situations: change or refill print cartridges. One way or another, you will need to get them out of the printer, and then put them in place. Consider this for several types of printing equipment.

Installing the cartridge

Handle the component with care during unpacking. DO NOT touch the metal contact with your hands, do not drop the cartridge on the floor or shake it. Do not leave it open, immediately insert it into the device, and this is done like this:

    Take the cartridge out of the box and completely remove the protective tape.

We install it in its place until it stops, until it touches the back wall.

Lift the locking lever up. When it reaches the correct position, you will hear the corresponding click.

Close the paper output tray cover.

The holder will move to a standard position and you can start printing right away, however if you are using only ink tanks of certain colors, you will need to follow the third step.

How to correctly insert cartridges into a canon printer

After a certain amount of time, the ink tank in the printer is empty, it is time to replace it. Most of the cartridges in Canon products are in the FINE format and are mounted in much the same way. Next, we will walk you through the process of installing a new ink tank in the printing devices mentioned above.

Insert the cartridge into the Canon printer

The need for replacement is required when stripes appear on the finished sheets, the picture becomes indistinct, or one of the colors is missing. In addition, the end of ink can be indicated by a notification displayed on the computer when trying to send a document to print. After purchasing a new ink tank, you need to follow the instructions below.

If you are faced with the appearance of streaks on the letter, this does NOT mean that the ink has begun to run out. There are a number of other reasons for their occurrence. Detailed information on this topic can be found in the material at the following link.

Removing a depleted cartridge

First of all, you should remove the empty container in the place of which a new one will be installed. This is done literally in a few steps, and the procedure looks like this:

  • Turn on the power and start the printer. It is not necessary to connect to a PC.
  • Open the side cover and paper output tray, which is directly behind it.

Press down on the ink bottle holder so that it drops down and makes a characteristic click.

Remove empty container and discard. Be careful, as there may still be paint in there. It is best to carry out all activities with gloves.

We recommend that you install the cartridge as soon as you remove the old one. In addition, do not use equipment without an ink tank.

Insert the cartridge into the Canon printer

The need for replacement is required when stripes appear on the finished sheets, the picture becomes indistinct, or one of the colors is missing. In addition, the end of ink can be indicated by a notification displayed on the computer when trying to send a document to print. After purchasing a new ink tank, you need to follow the instructions below.

If you are faced with the appearance of streaks on the letter, this does NOT mean that the ink has begun to run out. There are a number of other reasons for their occurrence. Detailed information on this topic can be found in the material at the following link.

Installing a cartridge in a Canon printer

After a certain amount of time, the ink tank in the printer is empty, it is time to replace it. Most of the cartridges in Canon products are in the FINE format and are mounted in much the same way. Next, we will walk you through the process of installing a new ink tank in the printing devices mentioned above.

Installing the cartridge

Handle the component with care during unpacking. DO NOT touch the metal contact with your hands, do not drop the cartridge on the floor or shake it. Do not leave it open, immediately insert it into the device, and this is done like this:

    Take the cartridge out of the box and completely remove the protective tape.

We install it in its place until it stops, until it touches the back wall.

Lift the locking lever up. When it reaches the correct position, you will hear the corresponding click.

Close the paper output tray cover.

The holder will move to a standard position and you can start printing right away, however if you are using only ink tanks of certain colors, you will need to follow the third step.

Selecting the cartridge to use

Sometimes users do not have the opportunity to immediately replace the cartridge or it becomes necessary to print with only one color. In this case, you should indicate to the periphery what paint he needs to use. This is done through the built-in software:

    Open the “Control Panel” menu via “Start”.

Go to the “Devices and Printers” section.

Find your Canon product, right-click on it and select “Print Settings”.

In the window that opens, find the “Maintenance” tab.

Click on the “Cartridge Options” tool.

Select the required ink tank for printing and Confirm the action by clicking on “OK”.

Now you need to reboot the device and you can proceed to print the required documents. If you DO NOT find your printer in the list when trying this step, please refer to the article in the link below. In it you will find instructions on how to correct this situation.

Sometimes it happens that new cartridges have been stored for too long or have been exposed to the external environment. This often causes the nozzle to dry out. There are several ways how you can restore the work of a component, adjusted the paint supply. Read more about this in our other material.

This concludes our article. You have been introduced to the procedure for installing a cartridge in a Canon printer. As you can see, everything is done in just a few steps, and this task will not be difficult even for an inexperienced user.