How to insert a SIM card into an iPhone 5

Summary and Комментарии и мнения владельцев

Protecting your device and user data is a top priority for Apple. The design features described above make it difficult for malicious access to the components of the phone. This technology gives developers hope that the owner will be responsible for installing / removing a SIM card from a device.

With such a locking mechanism, the SIM card does not fall out of the gadget and is not lost, even if the phone falls or receives other mechanical damage. In the case of iPhones, this arrangement of the tray was a hallmark of the company. Nobody has done this before.

Where and how is inserted

Most smartphones are designed to fit a SIM card into a slot under the battery. The smartphone device does not involve the owner dismantling the battery. The subscriber module is installed in a special hatch in the body of the device. over, the card is not pressed against the reading board, but first is placed in a retractable slide.

insert, card, iphone

On the first Apple devices, the connector for installing the subscriber module is located at the top of the smartphone, above the head speaker. From model “5” the SIM card slot “moved” to the right side panel, where it remains to this day.

Access to the tray is limited by designers: in order to remove the slide from the SIM, you need to open it using the proprietary key included in the delivery set (by default, it is in an oblong white envelope).

Preparing for the first launch

Preparation for the initial launch of the iPhone consists in unpacking and visual inspection of the gadget. After unpacking the box, make sure that it contains all the components of the kit declared by the manufacturer, namely:

  • a smartphone packed in a plastic protective form;
  • sync cable and power adapter;
  • an envelope made of thick white paper with a needle for opening the SIM card slot;
  • Apple Airpods headphones;
  • decorative elements;
  • headphone adapter.

Before starting, pay attention to the controls of the gadget. On models “5” and “SE” the button responsible for locking the phone screen and turning it on / off is located on the top edge of the device. On “six” and newer models, the lock button is located on the right side of the smartphone.

On the left side panel there are volume controls and a quick switch to silent mode.

The Home button is the main one when working with the device; located at the bottom of the front of the gadget; allows you to switch between tasks, go to the main menu, call the voice assistant Siri.

The models of the families “5”, “6”, “SE” are equipped with a standard headphone input of the “3.5” type. Starting with the “seven”, there is no such connector. the headphones are adapted for the battery socket, that is, you can insert old Airpods or third-party headphones only using the original adapter from the kit.

Now that the educational program on the controls has been carried out, you can proceed to the tips for installing a SIM card.

Possible problems with reading the SIM card and ways to solve them

When the SIM card is detected and read without errors, the device displays the name of the cellular network, signal strength, and the available type of wireless Internet connection. If, instead, “SIM card not inserted” or “No network” is displayed, the subscriber module is inserted incorrectly or there is a technical malfunction.

How to insert a SIM card into an iPhone

Design features of Apple gadgets distinguish these devices from devices of other brands. The structure of iPhones is focused on the minimum interference of the owner in the design of the phone and user safety, which is atypical for economy-class smartphones. Therefore, at the first acquaintance with the iPhone, the newly minted “Yabloko” often do not know how to insert a SIM card and start working with the device. Further instructions are relevant for the line of smartphones iPhone 5. iPhone X.

What to do if a paper clip was not included to open the tray

A common problem for Yabloko. Usually the factory key is lost during operation. Most relevant for those who purchase a used incomplete iPhone: the key is missing.

In this case, you need to use a handicraft analogue of a standard tool. These can be:

  • thin needle;
  • paper clip.

Before use, a paper clip must be unbent and when installing the module, work with a sharp end. In this case, the paper clip should enter the diameter of the tray larva. It’s the same with the needle. At the same time, an artisanal tool should not be brittle, because a metal fragment stuck in the hole of the tray can entail an expensive appeal to a specialized service.

There is no need to abuse such substitutes. their use over time leads to breakage of the tray opening.

Features of the used SIM card format

Starting with model “5”, iPhones are inserted into a Nano-SIM SIM card. the smallest available from telecom operators. The basic size SIM is compatible with the first two generations of Apple smartphones. iPhone 3G and 4s were equipped with Micro-SIM slots.

  • length: 12.3 mm;
  • width: 8.8 mm;
  • thickness 0.67 mm.

It is possible to adapt the standard subscriber module to the Micro-SIM format by cutting off a part of the plastic case. An ordinary SIM card cannot be inserted into new iPhones, even if the plastic part is cut out as much as possible. in the Nano-SIM the chip itself is smaller. Therefore, in some cases, subscribers are forced to change SIM-cards in order to start using Apple products. In communication salons, it is changed on the day of treatment; the subscriber number remains the same.

Installation process

The general algorithm is shown on the example of Apple iPhone 5S, but it is also relevant for newer models):

  • We take out the SIM card slot key from the envelope. it has a large oval eyelet and is similar to a paper clip.
  • We find the SIM slot on the right side panel of the iPhone or on the upper edge (the outline and the lock cylinder are clearly visible).
  • We insert the key into the hole, press slightly. access is open. On most devices, the SIM card mount pops out of the slot on its own. On used phones, the slide can be difficult to move due to wear or dirt.
  • We take out the slot, put it on a flat surface. The SIM card is simply inserted from above into the slot. Note that it is placed at the top, not the bottom. Make sure the position of the SIM card matches the opening of the tray.
  • you need to put the card into your smartphone. It is more convenient to do it this way: turn the phone with the right side towards you and hold it with one hand in this position. With the other hand, insert the mount with the SIM in the working position, at the same time holding the card with your index finger.
  • We insert the slide into the hole, push them all the way so that they do not protrude from the body. Installation completed.

Important. In Apple gadgets, the subscriber module mount is completely removed from the device. Therefore, be prepared for it to fall out of the case. Another important point: the correct position of the SIM card has no technological markers, except for coincidence along the contour, i.e. there are no additional latches or latches.

All the described manipulations are easier to carry out with the gadget turned on. If the device does not have a SIM card, then the diagnostic message “SIM card not inserted” is displayed on the notification screen, and the network indicator will be absent (instead of it. the inscription “No network”).

If all the above manipulations are done correctly, then after a minute the message will disappear, and the name of the cellular operator and the signal strength indicator will appear on the display.

min

There are three different SIM sizes, so chances are that the SIM from your current phone won’t fit the next one.

Nowadays, nano-format SIM cards are widely used. And in this article we want to talk about how to use nano-SIM in any phone.

Other options

A plastic adapter that comes with the card when purchasing will help to put Nano-SIM into Microsim in an old phone. Remember when you extruded plastic from a special mold? Save it is the easiest way to get what you want effortlessly.

There is also a second option. let’s discuss how to make a regular card from a nano-SIM with your own hands and insert it. You can cut the holder out of scrap materials!

  • Stock up on plastic forms. this may be an unnecessary bank or discount card;
  • Take a sturdy knife or sturdy scissors, arm yourself with a ruler;
  • Carefully sketch the silhouette of the future holder and cut it along the lines.

Just in case, let’s recall the standard sizes of three types of cards:

  • Standard (or mini). 25×15 mm;
  • Micro-SIM. 15×12 mm;
  • Nano-SIM. 12.3×8.8 mm.
READ  How to enable emoji on iPhone

If you can’t draw the shape yourself, take an old card and trace with a pencil! The finished slot should be carefully sanded to remove the “shaggy” edges. this will make it easier to insert the nano-SIM into the micro-SIM holder.

We discussed in detail how to install a nano SIM card in a smartphone in a large slot. now you are armed with actionable tips to help you cope with a small nuisance. Read, memorize and communicate without limits!

In this article, we will tell you how to correctly insert a SIM card into your phone yourself. New modern models are released with convenient slots into which cards of the desired size can be inserted without problems.

Yes, and all popular mobile operators produce original constructors. SIM cards of three demanded sizes: nano, micro and standard.

SIM card malfunctions

Users guess about their malfunction when the OS does not see the module and does not indicate it with a corresponding icon. The reasons may be as follows:

  • The SIM has expired and is not intended for further use.
  • It has mechanical damage. scratches, chips and breaks.
  • Unsuccessful pruning. We mentioned it above.
  • Phone firmware is tailored for a specific customer.
  • Slot problems.
  • Operating system and software crashes.
  • The contacts were damaged during installation.
  • Dirt hit the card holder.

In most cases, the card needs to be replaced, or the phone must be sent to the master for diagnostics, since these can be both hardware problems and system.

SIM card adapter

Note. You can fit the nano-SIM into the large SIM slot using a carefully selected adapter. If the SIM card sits loosely in the adapter, it can get stuck inside the phone, and your attempts to pull it out can cause serious damage to the delicate innards of the phone. In this case, it is better to contact the service.

How to determine the quality of the adapter? If it uses tape or sticky plastic to hold the SIM card in place, this is not the best option, which can lead to the consequences described in the paragraph above.

If the SIM card fits snugly into the adapter (which is sometimes even difficult to insert there), this is a good indicator. In most cases, such a card will not get stuck in the slot.

The rest is simple. Choose a suitable adapter, put the nano-SIM into it, and then insert this whole structure into the phone.

Why so many sizes

There are three types of SIM cards: standard, micro and nano. Standard SIM cards are typically used on older device models such as the Galaxy S2 and HTC Desire HD.

Micro-SIMs have already become smaller, because when a manufacturer tries to introduce so many technologies into one smartphone, every millimeter is important. Micro-SIM slots appear in Galaxy S3 and S4, HTC One X, Sony Xperia S, T and X, and so on.

The next and current size is nano-SIM. Today it is the smallest type of SIM-card. Nano-SIM is used in iPhone 5 and onwards, as well as Android devices released in the past few years.

How to insert a SIM card into an iPhone?

The globally popular iPhone 5s smartphones and other variations are incredibly easy to use. Each original iPhone is high quality, features a wide variety of features. Despite this, the happy owners of iPhones, who took it in their hands for the first time and are preparing for use, are already confused by the first question, namely, “How can I correctly insert a SIM card into my new iPhone?” In fact, this operation does not provide anything complicated, you just need to sequentially perform some actions. Which ones? We will talk about this further.

How to insert and remove a SIM card iphone 5 5c 5s

Preparing to use your smartphone for the first time

To insert a SIM card into a new iPhone 5s or some other model, the subscriber must first prepare the phone for the first use:

  • First of all, you need to make sure one hundred percent that the iPhone is not locked due to the change of mobile operator. A huge number of iPhones are locked to a specific mobile operator. If you want to switch to a different carrier, you will need to unlock the SIM slot in your own iPhone.
  • There are a significant proportion of iPhones that have absolutely no lock.
  • If the iPhone is still locked to a specific network, it needs to be unlocked.

We select the SIM card and insert it into the phone

In order to successfully insert your SIM card into a new iPhone 5s or its other configurations, the subscriber must clearly and consistently perform the following steps:

  • Before opening the SIM slot, the subscriber needs to turn off the phone. To do this, you need to press and hold the shutdown key of the smartphone until the “Turn off” button is displayed on the screen. Swipe the button and the iPhone 5s (and any other model) turns off.
  • Recently, SIM cards have acquired a slightly different look, or rather, they have become much smaller. The main problem is that earlier versions of the iPhone do not accept new SIM cards, and vice versa, that is, the SIM that the iPhone 5s accepts, other versions of this gadget may not accept.
  • Absolutely all iPhone models, with the exception of 4 CDMA, boast a SIM slot. The predominant part of iPhones has a structure such that the slot with the card tray is on the right side, somewhere in the middle. For iPhone 3G, 3GS, as well as first-generation iPhones, this connector is located among the boundaries of the upper area of ​​the smartphone.
  • A large number of these gadgets are bundled with a special tool for extracting a SIM card. This is a small paper clip with a thin ending. In the absence of such a tool, you can use an ordinary clerical paper, straightening one of its ends in advance.
  • After that, you need to insert the thin end into the hole of the slot and press a little, as a result of which the tray with the SIM card will “fly out” out. Then the subscriber needs to very carefully pull out the tray with the card from the mobile device.
  • The tray has a special recess for the card, where you need to insert it. To place the SIM card correctly, pay attention to how the previous SIM card was installed there. The gold contacts must point straight down.
  • The tray only fits one way, so you don’t have to worry about doing something wrong. You need to push the tray all the way in order to fix it in the iPhone. After that, you should check the side area of ​​the smartphone to once again make sure that the tray is correctly positioned.
  • After the steps taken, the iPhone 5s, as well as its other versions, will connect to the network automatically. Sometimes subscribers are asked to activate it on their own, but this is not difficult, so do not be alarmed when you see such an offer on your iPhone.

If you follow the described steps very carefully, clearly and consistently, the described operation will end in success, and you will immediately be able to use your brand new smartphone.

How to insert a SIM card into an iPhone

The question of how to insert a SIM card into an iPhone may seem irrelevant: if you buy a SIM card, the employees of the communication salon usually offer services to activate it and insert it themselves. But if you nevertheless decide to do it yourself or while using the iPhone, replace one SIM card with another (or insert an additional one), you may run into problems:

  • search and open the tray for the SIM card;
  • fitting the SIM card to the required format.

Inserting a SIM card into the tray itself is simple, but for a beginner user, and this can cause certain difficulties.

How to choose the size of the SIM card

If you have been using the same SIM card for a long time, it probably has standard dimensions of 25 x 15 x 0.76 mm. However, modern phone models, including iPhones, have switched to smaller format SIM cards:

  • micro. 15 x 12 x 0.76 mm;
  • nano. 12.30 x 8.80 x 0.67mm.

Older iPhone 3Gs and 3Gs use a standard format SIM card. However, models 4 and 4S require a micro-SIM, and the iPhone 5 and beyond are already designed for a nano-SIM card, practically consisting of only one chip. You can set the size of the SIM card without looking at the model, according to the size of the slot for it.

To get a card of the required format, you should contact the communication salon of your mobile operator: there you will be given a new SIM card with the ability to break off its edges to the desired format (micro- or nano-). In this case, your mobile number will remain the same. This service is usually provided free of charge. In this case, the old SIM card is blocked.

READ  How to enable face time on iPhone

Some craftsmen cut their existing SIM-card to the desired size on their own using stencils (they can be found on the Internet). However, this does not always go smoothly: there is a risk of damaging the chip or cutting the edges of the card unevenly. After inept manipulation, the card can get stuck in the tray and prevent it from opening. Therefore, we do not recommend that you conduct such experiments at home.

How to find and open a SIM card slot in iPhone

Finding and removing the SIM card tray is often difficult. We are used to the fact that in old mobile phones the SIM card is inserted into the slot located directly under the battery. However, modern phones have a different design. The tray for the SIM card is almost invisible in them. And to open it, you don’t have to remove the back cover and take out the battery.

In the latest generation iPhones, the SIM card slot is located on the right side surface of the case (approximately in the middle). On older models, it may appear on the upper edge of the case, next to the “Enable” button. Looking closely, you will see a tray cover with a small hole.

The hole is like a keyhole: the tray can only be removed when in use. Usually, when you buy an iPhone in a box, you also find a thin metal wire key. If you insert it into the hole of the plug, it will slide out, after which you can easily pull out the slot itself.

If the key is lost or for some reason your iPhone was not equipped with it, you can take a small paper clip and, by unbending it on one side, use it instead of the key. she will successfully replace him.

How to insert a SIM card into an iPhone

Once you understand the location of the slot and the format of the SIM card, you can easily insert or remove it. The algorithm of actions is simple.

  • Disconnect iPhone if it was turned on.
  • Insert the key into the hole of the SIM card slot.
  • Push the key down. This action does not require any force: a little effort is sufficient.
  • The slot will pop out slightly. Hook it up with your fingers and gently pull it out of the iPhone.
  • Remove the old SIM card from the tray (if it was there).
  • Insert the SIM card into the slot. The notches in it will tell you how to do it right. In case of doubt, check yourself: the SIM card contacts in relation to the surface of the slot should “look” down.
  • Reinsert the tray gently and push it back.
  • Turn on your iPhone. If you inserted a new SIM card, now is the time to start activating it and setting up the device.

If the iPhone is working properly, you can easily do these manipulations and insert the SIM card into it yourself. If something does not work out (most often the tray does not slide out), contact the service center. And to begin with, under the pretext of replacing the SIM-card, you can come to the cellular salon. Operators will help you insert a SIM card and report a mechanical failure of the tray, if any.

How to get a SIM card from an iPhone?

Copying contacts from iPhone to iPhone, setting a beautiful wallpaper, or recording a video yourself using just one phone from Apple is not difficult at all. Another thing is from time to time arising technical problems associated with the maintenance of the device. One of them is installing and removing a SIM card; how to remove a SIM card from an iPhone or iPad. let’s try to figure it out.

Removing a card from the slot is as easy as inserting a SIM card into an iPhone; before starting manipulations, the user needs to prepare:

  • Apple branded paper clip. it is certainly present in the box with the iPhone and, most likely, was used to install the SIM; if there is no such paper clip, an unbent paper clip, a sewing needle, an awl, a toothpick or any other elongated object of a suitable diameter.

Important: it is not recommended to use tools with sharp ends (needles, awls, etc.); if you still have to, you should use them very carefully, without making unnecessary efforts. otherwise, there is a high probability of damaging the working elements of the iPhone.

With everything you need in your hands, the owner will be able to remove the SIM card from the phone as easily as unlocking an Apple ID. User actions:

  • Find a SIM card slot with a distinctive hole on one of the ends of your iPhone. It is present on the device in any case. you just need to turn it in your hands and take a closer look at the case.
  • Carefully, without making any effort, insert the sting of a paper clip into the groove of the SIM card slot. you can do this by holding the iPhone both vertically and horizontally.

How to insert Sim Card in iPhone 5S iPhone 5C iPhone 5

  • Press lightly with a paper clip inward. so that the slot opens. At this stage, no difficulties should arise; if, despite the efforts of the owner, nothing happens, you should immediately contact the service center. the wizard will deal with the problem as quickly as with a request to reset all settings on the iPhone.
  • Picking up the slot with your fingers (you can use tweezers or small pliers), open it. until the “substrate” for the SIM card completely comes out of the case.
  • Done! The user has successfully retrieved the slot. Now all that remains is to remove the SIM card. it’s no more difficult to do than to set up Touch ID correctly.

Advice: if the SIM gets stuck in the slot during extraction, you should carefully correct its position using a thin needle or wire. At the extraction stage, it makes sense to apply a little more effort. this will not harm either the slot or the SIM card itself.

Usually, the SIM can be separated from the “substrate” by ordinary shaking out; if it does not come out, you should try to press on the back side with your finger (it will not damage the chip) or “glue” the non-working side of the SIM card with tape and pull it towards you. That’s all. by safely pulling out the SIM card from the iPhone, the user can replace it with another one or reinsert it into place.

Possible problems with reading the SIM card and ways to solve them

When the SIM card is detected and read without errors, the device displays the name of the cellular network, signal strength, and the available type of wireless Internet connection. If, instead, “SIM card not inserted” or “No network” is displayed, the subscriber module is inserted incorrectly or there is a technical malfunction.

How to change SIM card in iPhone

Replacement in any of the iPhone phones is carried out in exactly the same way as installing a new one:

  • Remove the SIM card slot with a key, paper clip or needle;
  • Get out the old SIM.
  • Insert a new one, taking into account the shape of the sled and serifs.
  • Join the network.

Incorrect installation

Problems can arise if the SIM card tray is in the wrong position. skewed to the right or left. Or the card was inserted incorrectly. You will need to open the slot again.

In the event that the problem arose due to an unevenly installed slide, it will be enough to pull them out and insert them back, carefully fixing them in the correct position.

When the SIM card is facing the wrong side (with the metal chip facing up or the notch on one of the corners does not match the shape of the slot), it will be enough to place the SIM card in the correct position.

When you cut off the chip yourself, you may be faced with the fact that it will not have serifs and get confused about which side it will be easy to install. To avoid this, make notes on the SIM card yourself, for example, using a marker.

What to do if a paper clip was not included to open the tray

A common problem for Yabloko. Usually the factory key is lost during operation. Most relevant for those who purchase a used incomplete iPhone: the key is missing.

In this case, you need to use a handicraft analogue of a standard tool. These can be:

  • thin needle;
  • paper clip.

Before use, a paper clip must be unbent and when installing the module, work with a sharp end. In this case, the paper clip should enter the diameter of the tray larva. It’s the same with the needle. At the same time, an artisanal tool should not be brittle, because a metal fragment stuck in the hole of the tray can entail an expensive appeal to a specialized service.

READ  How to turn off the cloud on iPhone

There is no need to abuse such substitutes. their use over time leads to breakage of the tray opening.

Possible problems with reading SIM and ways to solve them

Not always, even after successfully opening the device, the SIM card works correctly. On rare occasions, users may run into problems. To solve them, first of all, it is necessary to determine the reason.

In some cases, in order to activate the SIM card, you will have to connect to the Internet via a wireless connection (Wi-Fi). If this is not possible, you can also connect your phone to i-Tunes using the supplied cable. The program independently activates the card.

If everything worked out, the screen will display the name of the cellular network and the signal strength. If even after that, the screen shows that “Network not found”, then there are technical problems, or the SIM card was inserted incorrectly.

Preparing for the first launch

Preparation for the initial launch of the iPhone consists in unpacking and visual inspection of the gadget. After unpacking the box, make sure that it contains all the components of the kit declared by the manufacturer, namely:

  • a smartphone packed in a plastic protective form;
  • sync cable and power adapter;
  • an envelope made of thick white paper with a needle for opening the SIM card slot;
  • Apple Airpods headphones;
  • decorative elements;
  • headphone adapter.

Before starting, pay attention to the controls of the gadget. On models “5” and “SE” the button responsible for locking the phone screen and turning it on / off is located on the top edge of the device. On “six” and newer models, the lock button is located on the right side of the smartphone.

On the left side panel there are volume controls and a quick switch to silent mode.

The Home button is the main one when working with the device; located at the bottom of the front of the gadget; allows you to switch between tasks, go to the main menu, call the voice assistant Siri.

The models of the families “5”, “6”, “SE” are equipped with a standard headphone input of the “3.5” type. Starting with the “seven”, there is no such connector. the headphones are adapted for the battery socket, that is, you can insert old Airpods or third-party headphones only using the original adapter from the kit.

Now that the educational program on the controls has been carried out, you can proceed to the tips for installing a SIM card.

iPhone 5 / 5S / SE HOW TO: Insert / Remove a SIM Card

Installation process

The general algorithm is shown on the example of Apple iPhone 5S, but it is also relevant for newer models):

  • We take out the SIM card slot key from the envelope. it has a large oval eyelet and is similar to a paper clip.
  • We find the SIM slot on the right side panel of the iPhone or on the upper edge (the outline and the lock cylinder are clearly visible).
  • We insert the key into the hole, press slightly. access is open. On most devices, the SIM card mount pops out of the slot on its own. On used phones, the slide can be difficult to move due to wear or dirt.
  • We take out the slot, put it on a flat surface. The SIM card is simply inserted from above into the slot. Note that it is placed at the top, not the bottom. Make sure the position of the SIM card matches the opening of the tray.
  • you need to put the card into your smartphone. It is more convenient to do it this way: turn the phone with the right side towards you and hold it with one hand in this position. With the other hand, insert the mount with the SIM in the working position, at the same time holding the card with your index finger.
  • We insert the slide into the hole, push them all the way so that they do not protrude from the body. Installation completed.

Important. In Apple gadgets, the subscriber module mount is completely removed from the device. Therefore, be prepared for it to fall out of the case. Another important point: the correct position of the SIM card has no technological markers, except for coincidence along the contour, i.e. there are no additional latches or latches.

All the described manipulations are easier to carry out with the gadget turned on. If the device does not have a SIM card, then the diagnostic message “SIM card not inserted” is displayed on the notification screen, and the network indicator will be absent (instead of it. the inscription “No network”).

If all the above manipulations are done correctly, then after a minute the message will disappear, and the name of the cellular operator and the signal strength indicator will appear on the display.

Technical difficulites

It is possible that the SIM is not detected by the device even with the correct position of the subscriber module. This card is defective and will not work on smartphones from other manufacturers. The defect occurs after the owner of the gadget tries to cut the card to fit the “nano” format in an artisanal way. Physical deterioration of the card is also possible. kinks, kinks, etc.

Computer Internet Blog = Articles That Make Money

Take my many years of experience as a gift. the book “Auto Sales through Blog”

How to insert a SIM card into iPhone 5 yourself

In order to insert a SIM card into an iPhone, you do not need to disassemble the phone, open the panel, or pull out the battery. Everything is much simpler.

How to insert a SIM card into iPhone 5 correctly and quickly

How to insert a SIM card into an iPhone 5, how to remove a SIM card tray from an iPhone case without breaking it? Answers in this article, read to the end.

Do you want to know how to make stable money on the Internet from 500 rubles a day? Download my free book = “How to guarantee to earn from 500 rubles a day”

If you became the proud owner of the fifth iPhone, then you probably faced the question “how to insert a SIM card”? The fact is that iPhones are not designed at all like regular smartphones.

It can be difficult for beginners to understand how to safely pull out a special case for a SIM card. But to deal with this issue is not at all difficult.

Preparing the SIM card

The first thing you need to do is prepare your SIM card. It must be of the correct size. For the fifth iPhone, this is a nano-SIM. This type of sim card is even smaller than micro.

If the user’s micro-SIM can be easily cut out by themselves, then experimenting with the nano-SIM is not recommended.

To cut your SIM card, you need to use specially designed scissors and a stencil. If you try to do this with ordinary scissors, without using a stencil, it is possible to damage the contacts.

If you do not have the tools necessary to cut a SIM card, order it from your operator or purchase a new one of the required format.

Installing a SIM card

When the SIM card is ready, you can proceed to install it. To do this, you need a paper clip, decorated in the form of a key, which, as a rule, comes with the iPhone.

If for some reason you don’t have one, use a regular metal paper clip. Just twist it into the desired key shape or into the letter “G”.

The SIM card is inserted into the right side panel. There is a special hole in which the key must be inserted. After a light press, a special case for the SIM card will appear.

Pull out the case, insert the nano-SIM into it, and place the case back into the iPhone. The sim card is inserted with the picture up, with the microcircuit down, that is, the microcircuit should be facing the back of the smartphone. Although you will not be able to insert it in another way.

Now your iPhone is ready for use, you can turn it on.

Summing up, we can say that if your SIM card matches the standard dimensions for the iPhone 5, then there are no difficulties with installation. The only difficulty is to purchase a SIM card for the five in advance, but it can be solved quite simply.

Congratulations on a successful purchase, pleasant use!

P.S. I am attaching a screenshot of my earnings in affiliate programs. And I remind you that everyone can make money, even a beginner! The main thing is to do it correctly, which means to learn from those who are already earning, that is, from the professionals of the Internet business.

NNCXV.INFO 2021