How To Install A Printer On A Laptop Without A Disk

What else do you need to know?

Do not forget that some printer drivers are installed along with the operating system, but this is only if they are included in this Windows assembly. In addition, it is recommended that you DO NOT forget to update them, as this will greatly SIMplify your life. Since you can install a printer without a disk, it is better to do this using Windows Update, again, this is only for the software that was installed along with the OS. In the second cases, you need to download a special utility that will display the status of your software on your computer. In SIMple terms, outdated drivers will be automatically updated, but you can do it manually. It so happens that everything seems to work, but the device does not find it. You think that this is due to another “broken” driver, and you start reinstalling it, but the reason is often far from this. If the USB port has been in use for a long time, then it is quite possible that it has failed. It is for this SIMple reason that it is recommended to first try to change the socket, and only then reinstall something.

How to install a printer on a laptop without an installation disk. How to install a printer on a computer without an installation disc on windows 8

Printer setup for Windows 8 can be subdivided according to two pairing paths. This is a manual and automatic way to recognize a device. It is also worth more specifically to dwell on the types of connection. local and network. We will consider all the options for how the printer is installed on Windows 8.

Installing the driver from a second printer

Let’s look at the example of Windows 7 64-bit and the Xerox Phaser 3116 printer.

The website of the manufacturer has software for this system. You can try here Xerox Phaser 3117.

Some general information

The fact is that most users, even if they are not beginners, naively believe that installation without a special disk is impossible, but this is a fundamentally wrong point of view. over, there are several ways that you can use. The easiest is to use the Internet, if available. You need to go to the official website of the developer of your printer and find the latest drivers for it. Then download them to your computer. And since it is not difficult to install drivers on the printer in the future, you will figure it out yourself. You just need to follow the instructions and restart your computer at the end. For now, let’s talk about how to install the printer in one of the ways discussed below. Everything about everything will take no more than 10 minutes.

How to install a printer without an installation disc on a windows 8 laptop

Take the HP DeskJet F380 as an example. If you do not know the model of your printer or MFP, then carefully study the identification labels on the case. You can also find the model on the stickers on the back or bottom of the device.

We open a browser and in Google or Yandex write “HP DeskJet F380 driver”. You Substituting Your Model.

In most cases, in the first place, or on the first page of the issue, there will be a link to the equipment support page on the manufacturer’s official website.

You can understand that this is the official website at.

It is more convenient to download from the official website for two reasons:

  • There is malicious code;
  • There is also fresh software.

If there was NO link to the official site on the first page of the issue, then you can find it yourself. We set “HP” and select “Drivers” or “Support and drivers”.

In the section “Drivers and downloads” set your model (for example, “F380”) and click “Go”.

Or, you can in the “Define a product” section, click “Find Now” and follow the instructions in the wizard. (This option is still available for Windows XP / Vista / 7 with browsers: Internet Explorer (IE) 6.0; Firefox 3.6.X, 12.0; Google Chrome).

Select our device from the search results.

Select your operating system from the drop-down list and click “Send”.

In the “Driver” section, click “Download”.

There may be several software options here. For example, full featured software and basic driver. If you need Advanced device and image processing capabilities. download full-featured software.

Run the downloaded file.

The files will be unpacked and the installation wizard will start. Click “Install” and follow the further instructions detailed in the article about installing a printer from a disk.

Method one

In Windows XP, in the window that opens, click “Control Panel” and select “Printers and Other Hardware” or “Printers and Faxes”.

In Windows Vista or Windows 7, select “Printers” or “Devices and Printers” from the right side of the Start menu.

Click the Add Printer button.

In Windows XP, it is located in the Print Tasks column. The Add Printer Wizard will open.

For Windows Vista or Windows 7, the Add Printer button is located on the toolbar. The Add Printer window opens.

Click Next to start the wizard in Windows XP.

On all operating systems, select “Add a local printer” if you are installing a printer that is connected directly to the computer.

Or select “Add network printer” to add a printer connected to your home or office network.

Windows Vista and Windows 7 also provide the ability to wirelessly connect the printer to a computer via Wi-Fi or using Bluetuth.

Select the printer connection port from the drop-down menu (most likely it will be USB001). Click Next. List the printer manufacturer in the Manufacturer list. Select your printer model from the Printers list. Click “Next”.

In the next window, enter the name of the printer you come up with or leave the default printer name. Click Next. Windows will install the printer on your computer.

To check the functionality in the window that opens, you can click the “Print Test Page” button. When finished Click Finish. Printer installation completed.

Local and network devices

A local printer is a device that you install and configure at home. You will hardly find it in a large office, since there are more and more network models of such devices being used. If it is equipped with a special bus that is directly connected to the system unit, then problems with setting and pairing should not arise. Even a schoolboy can cope with this, since all configuration work is done automatically by the Windows 8 system itself, which will detect and install the device almost independently.

In recent years, this type of printer connection, such as setting up via a Wi-Fi router, has become very popular. If you use the Internet at home through such a device, then you should know that almost all models of modern printing devices are connected to a computer via Wi-Fi. Unlike the wired connection method, in our version you will need to search for a new device.

To do this, first check if the Wi-Fi router is turned on and the corresponding indicator button on the device itself. details about where this indicator is located and how it works can be found in the instructions that come with each specific model. As soon as you turn on Wi-Fi access, you need to find the “Add networks” section on your computer. Directly within its framework, a search for a new connection is made. If access is initially configured correctly, then Windows 8 will immediately detect a new device.

READ  The Printer Jammed The Paper What To Do

If the search failed, then you need:

  • Check if the copier is on and is not “sleeping”;
  • Check if you have already added it to Windows 8 earlier. If such manipulations are repeated, the system will not add it a second time;
  • Check if there is a Wi-Fi signal and how available it is. That is, even if the devices (printer and computer) are in different rooms, the computer system may NOT pick up the signal;
  • Other devices in the house that emit certain waves may interfere with the connection. These include microwaves, cell phones, and the like.
  • Check how accurately the Wi-Fi router is paired with the computer. To do this, you need to go to the Internet and open any page. It should be fully displayed.
  • As a last resort, you can visit the copier manufacturer’s website. Perhaps there may be certain features that a particular model has.

To install the network model, you need to follow all the same recommendations as in the case of the local option. You just need to take into account that in the network case, you will have to wait a while until Windows 8 detects the device. You should also make sure when looking for a network printer that it has the correct IP address information.

Automatic connection method

If we focus on the automatic method, then we can say with precision that there is nothing difficult here. Windows 8 will automatically detect the desired device, as described above. If a connection is made to a networked device, the system can detect several models at once. You just need to select the one you want (by name) and make Pairing.

During the communication phase, there may be a problem with the driver. It will be required to install the system during the search. The driver can be downloaded automatically, or included on a disk with the printer. If you have NOT installed the driver for connection, then this can be done later, when the system itself requests it by means of a message on the screen.

Section conversion

After that, we need to convert the space we just shrunk to a clean partition. Clicking on the rectangle that means NOT allocated space with the right mouse button, select the “Create SIMple Volume” tab. It looks something like this:

The wizard will start. Face without hesitation, everywhere we click on the Next button. There is nothing particularly important in it. After creating the volume, we proceed to the main part of the work.

How to install Windows without disk and flash drive detailed instructions

Installing or reinstalling Windows is a fairly SIMple and automated operation, however, only if you have a working floppy drive or at least a USB flash drive with a recorded image of Windows XP, 7 or the desired version. Reinstallation can be more problematic, especially when data needs to be saved. And if there is a disk or flash drive, how can you install and reinstall in this case? Our article will describe in detail how to reinstall a working version of Windows 7 without using a disk or flash drive.

Downloading the necessary utilities. Short description

The operation itself is quite SIMple, and an experienced user will have enough introductory words with a head. Let’s break the process down into several stages:

  • Compressing your hard drive and allocating the right amount of memory.
  • Copying data from an image from the OS to a previously prepared memory area.
  • Creating an installation “disk“, which is located inside the selected area of ​​memory using the EasyBSD utility.
  • Installing Windows OS and setting it up.

These factors will be described in more detail below, so that any user will be able to figure out how and what to do.

Preparing a partition for installation files. Creating a virtual disk

The next step will be working with the last utility called EasyBCD. After starting the program, click on Add Record. Choose WinPE from among several tabs. In the name field, you need to enter the name of the section we created. By default, in all laptops with Windows installed, it is called “New Volume”. So we write in the “Name” category. In the “Paths” let there be the boot.Wim file, which is located in the sources folder inside the image.

Installing Windows

After completing the entire operation, click on the Current settings button. With its help, you can make sure that your actions were NOT in vain. If a new entry appears: congratulations, you did all the work yourself. As you can see, it’s very easy to install or reinstall Windows without a disk and without a USB flash drive! After restarting the computer or laptop, in the special menu for selecting the operating system, select “New Volume” and start the standard process of installing or reinstalling Windows.

Create a section

The first step is to install a partition on the disk where the installation files of the Windows operating system will be stored. To do this, go to “Disk Management”. To get into this submenu, you need to name it with the right mouse button on “My Computer”, select the “Management” tab there, and there is “Disk Management” in it. You can also enter “Disk Management” through the search and you will immediately be taken to the desired page. There you can also track the amount of memory on a flash drive or other devices. The option we need looks like this:

Here you can see the amount of available and used information on the hard disk. It is important for our operation that the hard disk is already divided into two partitions, as in the picture. After completing this factor, we divide the second disk (in our case D) into two different partitions. To do this, right-click on the D drive, and then select the “Shrink Volume” tab. After clicking, a window pops up in which you are asked to enter how much to compress the disk. You need to enter a value slightly larger than the size of the Windows image. Although there is often enough memory for laptops, in order to save, enter a megabyte in 150-300 more than the weight of the image. Click “Compress”. The compression itself will not last long. about five minutes, no more.

Copy setting data

Opening Daemon Tools Lite or another version available on your laptop, select the image with Windows 7 or 8. Next, click on the “Add Image” tab. After it appeared in our program, click on “Mount”. A screenshot of this operation is shown below.

From the virtual drive, copy all data, including folders and files, to a small disk that we created about 10 minutes ago. You can find out the name of the disc by looking at the letter that is located under the button bar.

Driver installation via device manager

If you have a driver for a specific device (on a hard disk or flash drive), but there is no installation file and you do not have this driver installed on the system, do the following:

Open the “Start” menu, find the “computer” icon, right-click on it (hereinafter: RMB) and select properties.

A system window will open, click on “Device Manager”

The device manager will open, in which we see all the devices installed on our system. If there is a yellow exclamation mark next to a device, it means that no drivers are installed for this device, or the driver is not installed correctly. Right click on the problem device and select “Properties”

We see in the properties of this device that there are no drivers installed for it. Click “Update driver.”

Now we have a choice, either automatic search for drivers by Windows system, or manual driver installation. We select “Search and install drivers manually”

READ  The Printer Writes No Toner And The Cartridge Is Full

Tell the system where to look for drivers. To do this, click “Browse”

And select our driver folder. Click “OK”

We see that the driver for the device is being installed

If the installation is successful, a window will appear that the installation of drivers for this device is completed

Click “Close” and see that the yellow exclamation mark has disappeared from our device (TV tuner). Driver installed!

If you do not have a driver for this device, then you can select “Automatic search for drivers”. In this case, Windows will try to find a driver for the device on this computer and on the Internet

But this method does not always work, so it’s better not to rely on it.

Note: This method is described for the Windows 7 operating system. If you have WindowsXP or Windows 8 installed, the steps will be SIMilar.

Installing the driver from the manufacturer’s website

You can find the latest drivers on the hardware manufacturer’s website. We go to the manufacturer’s website, look for the model of our equipment, and in the section “Support”, “Downloads” or “Download” (different for all manufacturers) we select our operating system and download the driver to our computer.

Example: I need to download drivers for my motherboard. Using the CPU-Z program, I can find out the model of my motherboard. Then I go to the official BIOStar website (my motherboard manufacturer). I choose the section “Support”. “download”

(All pictures are clickable)

Choosing my motherboard model

Next, I select the component of the motherboard (chipset, network device, etc.) And for which operating system and press the download button

I select the folder where to save the driver and click “Save”

Next, the downloaded driver must be installed. The driver can be treated as an executable file (for example: setup.Exe) or as a folder with driver files without an installation file. If the downloaded drivers have an installation file, there will be no problem with its establishment. Just launch the executable file and follow the instructions on the screen. If you have a driver in the form of a folder with files without an installation file, then read the following installation method.

How to install the driver in several ways

Hello dear reader of my blog! The stable operation of the Windows operating system depends on how you correctly installed the driver for the device.

In this article, I will tell you how to install a driver for a device in the Windows operating system in several ways.

Example: You have installed or reinstalled Windows, start working on the computer, and the screen resolution does not suit you, you go into the screen settings and cannot set the normal screen resolution, because the card driver is not installed. Or you suddenly find that there is no sound in your computer or laptop. Why? That’s right. the driver is not installed on the audio equipment. Trying to access the Internet, but you have no access? The driver is not installed on the network card.

To avoid such problems and correctly install drivers in the system, we will talk about this in this article. I will tell you step by step how to install drivers on a laptop or computer in several ways.

Without the required driver, the device will NOT work properly. Therefore, it is so important that you have all the necessary drivers installed on your system.!

So, in this article we will talk:

I will immediately warn you that before installing the driver, you need to make a system restore point. Why is this needed? Then, if something goes wrong with us or the driver gets “crooked” or you install the wrong driver, then the system can be rolled back.

Always try to adhere to the following rule when installing drivers: First, install the drivers for the motherboard chipset, then the driver for the adapter, then the rest of the drivers.

Installing the driver from the disc

When you purchase a computer or laptop, it should always come with installation discs with drivers and software. When installing or reinstalling the operating system, you can install drivers for devices from THESE disks. There is nothing complicated about this, just insert the disc into the drive, click on the installation file, the driver installer starts, then follow the instructions in the installer.

The problem is that the disk may already contain outdated drivers or the disks may be lost. In this case, use the following driver installation methods.

DriverPack Solution Driver Updater

Driverpacksolution is a program for automatic installation, search and update of drivers.

My favorite and most versatile way to install drivers. Pre-downloaded the “Full” version to a disk or flash drive, you can install drivers on a computer where there is not even access to the Internet.

We go to the site: drp.Su/ru/. Click “download”.

We choose the version “Full” or “Vip”. The “Full” version can be downloaded for free, without registration via torrent. I will tell you what torrent is in the following articles, so subscribe to blog updates. After clicking the “download” button, download the torrent file of the “Full” version to your computer.

Reinstall Windows 10 without disk, flash drive and BIOS

Now I will tell you how to reinstall Windows 10 without a disk, flash drive, not included in the BIOS (UEFI) or in the Boot Menu (boot menu), from the computer desktop. This method can be useful in some situations.

Sometimes, when the computer is working, there are problems with the software. If the user cannot or does not want to understand the reasons, then the problem is solved in a radical way: reinstalling Windows. Instead of the previous system, a new one is installed, computer operation starts from scratch.

  • Ways to install Windows 10
  • Reinstall Windows 10 without a disk and a USB flash drive from the Desktop
  • Deleting the Windows.Old folder
  • Conclusions of the article
  • Reinstall Windows 10 without disk, flash drive and BIOS

The standard process of reinstalling the system is as follows: a bootable Windows flash drive is created or a DVD with a system image is used, then the computer boots from bootable media, after which the OS is installed.

Modern computers, especially laptops, often have an optical CD / DVD drive, so it is impossible to install an operating system from a disc. You need to reinstall Windows 10 without disc.

To boot from a USB flash drive or disk, you need to enter the BIOS, UEFI BIOS, or Boot Menu to select the disk from which you want to boot. Users may have difficulty entering the BIOS (UEFI) of the computer, which is not so easy on some laptops. How to reinstall Windows 10 without BIOS?

As a result, we need to reinstall Windows 10 without a disk and a flash drive, do not go into the BIOS. You can do without all this, read the instructions in this article.

Ways to install Windows 10

Installing Windows on a PC is carried out in several ways: after booting from external media (USB flash drive or DVD drive) or using special software.

The following methods are used to install the operating system:

  • Bootable USB stick. installing Windows from a USB stick;
  • DVD disc. installation of the system from an optical disc;
  • Media Creation Tool. installing Windows 10 using a utility;
  • Windows Update Assistant application. installing a new OS version using an update;
  • New launch. the function of reinstalling the OS using the system;
  • Reinstall Windows 10 using an “.ISO” disk image file.

In this guide, we’ll go over a method to install Windows 10 directly from a running system. The new operating system will be installed on the previous Windows floor. You must download the file “Windows 10 iso” to your computer in advance.

Reinstall Windows 10 without a disk and a USB flash drive from the Desktop

Follow these steps to boot the OS image:

  • Download the Media Creation Tool on your PC.
  • Run the tool, accept the license agreement.
  • In the “What do you want to do?” activate the item “Create installation media (USB. Flash memory device, DVD, or ISO file)”.
  • Select language, edition, Windows architecture
  • In the window “Select media” check the box in the “ISO file”.
  • Follow the instructions of the program, in total on your computer there will be a file with the operating system in the “.ISO” format.
READ  How To Connect A Brother Printer To Wi-Fi

For clarity, the image file can be moved to the computer desktop.

Right-click on the ISO file, select “Connect” in the context menu.

The Explorer window will open the contents of the disk image mounted in the virtual drive. Run the “setup” file as administrator.

The Windows 10 Setup window opens on your computer, prompting you to select one of the options:

  • Download updates, drivers and additional features (recommended).
  • Not now.

You can download updates, if there is no time for this, refuse to receive updates.

The program checks for updates, prepares the system.

In the window “Notices and license terms apply” click on the “Accept” button.

Checking for updates.

In the “Ready to install” window, the following items are activated by default:

  • Install Windows 10 of the appropriate edition (in this case, Windows 10 Pro).
  • Save personal files and applications.

Click on “Change the selected to save components”.

In the window “Select what you want to keep” you need to select one of the options:

  • Save personal files and applications. save files, programs and settings.
  • Save only my personal files. only personal data will be saved, settings and programs will be deleted.
  • Do NOT save anything. all data will be deleted from the computer, including personal files, applications and settings.

For a “clean” install of Windows 10, select “Save Nothing”.

In the “Ready to install” window, review what you have chosen, and then click on the “Install” button.

The Windows 10 Setup window will open. The computer will restart several times during installation.

System installation Takes some time during which no user action is required.

At the final stage of reinstalling the OS, windows will open in which you need to select options for configuring Windows. The windows are grouped into sections: “Basics”, “Network”, “Account”, “Services”.

In the window “Let’s start with the region. It is right? ” select a country.

In the “Is this the correct keyboard layout?” select layout.

In the “Do you want to add a second keyboard layout?” you can add a second layout if needed.

Installation of fundamental elements is in progress.

In the window “Select a configuration method”, two methods are offered:

  • Set up for personal use. set up a personal account with full control over the device.
  • Customize for organization. configure access to organization resources, the organization has full control over this computer.

In most cases, you need to select “Configure for personal use”.

In the “Sign in with your Microsoft account” window, enter your account information. Here you can create an account.

If this PC is not using a Microsoft account, click on “Offline account”.

In the next window, “Sign in with a Microsoft account?” we will be prompted to log in again. Click on the “Net” or “Yes”.

In the Who Will Use This Computer? you will need to enter your username.

In the Create a memorable password window, enter your password to log into your account. If you are NOT using a Windows password, do not enter anything.

In the “Convenient work on different devices using the action log” window, click on the “Net” button.

In the “Select privacy options for this device” window, turn off the suggested options to reduce the size of data sent from PC to Microsoft.

Preparing the computer for the first start of the operating system begins.

The Windows 10 desktop will start on the screen. The “Networks” notification will open, in which click on the “Yes” button to allow the second computers and devices. Having found your computer.

Windows 10 reinstalls floor from previous version, no DVD, bootable USB, not included in BIOS or UEFI.

Installing the software

Drivers are downloaded as an installation package with the exe extension. If you had an installation disc, you would find the exact same file inside it. Accordingly, the installation order does not change either:

How To Install A Printer On A Laptop Without A Disk
  • Run the downloaded installation file, usually Setup.Exe.
  • With the help of the installation wizard, go through all the steps.
  • Restart your computer (if the wizard prompts you to do this).

After rebooting, go to the “Devices and Printers” section to make sure that the printer is correctly detected by the system and is used by default.

How to find out which driver you need?

For the connected hardware to work correctly, you need to find the correct drivers. To successfully complete this task, you need to know:

  • Printer model.
  • Operating system version and bitness.

Look for the exact model on the device case, box or user manual. You can find out the version and bitness in the system properties:

  • Right click on “Computer”.
  • Open “Properties”.
  • Check the system type and edition. Knowing these parameters, you can download drivers from the manufacturer’s website for printing. If you have a Canon printer, go to the canon.Ru website and go to the “Support” section. For HP Laserjet, drivers can be found on HP.com, etc.

Driver download

To quickly download Windows 7 printer drivers from the official website, Use the search by model. Take a Canon driver as an example:

  • Go to the manufacturer’s website.
  • Go to the section “Support”. “For individual users”.
  • Click “View All Products”.
  • Enter the exact printer model in the search box to find and download the installation disc.

Smart Search will find the software you need and automatically detect your operating system. Let’s say you need drivers for Windows 7. check that not only the version matches, but also the bit depth (32 or 64 bit), then click “Download”. For HP, drivers are located and downloaded in the same way as for printers of second brands, Epson, Brother, etc.

Diskless Printer Installation: Finding the Right Driver for the Right Place

Have you figured out how to install the printer, but you have a driver disk on hand? Or have you figured out how to connect a printer to a laptop, but the laptop has a drive to insert the software media? The situations may be different, but they have one problem in common. the need to install drivers on the printer without a disk.

Equipment ID

If you do NOT want to search for drivers on the official website (or for some reason the required software is not there), you can use the second method:

  • Right click on “Computer”.
  • Open the Manage tool.
  • Go to “Device Manager”.
  • Right-click on the printer you connected.
  • Go to the “Details” tab.
  • Open the “Equipment ID”.
  • Copy the first value (if nothing was found for this code, try the second).
  • Paste it into the search box on devid.Info.

Select the appropriate driver version (according to the version and bitness of the system) and click on the floppy disk to download the software.

Note: The hardware ID must be determined even if the device is not fully identified by the system. SIMply put, if the printer was installed, then you can easily find out its code through the device manager.

Update centre

You can try installing the printer through Windows Update. There is nothing complicated here:

  • Disconnect the printer from the computer.
  • Open the “Devices and Printers” section.
  • Click on the “Settings” button.
  • Select “Add Local”.
  • Leave the port unchanged.
  • Click on the “Update Center” button.
  • Wait until the available drivers are loaded and select the software for your model (or at least a series).
  • Leave the printer name unchanged and wait for it to install. Sharing is not necessary.

After installation, you will see an icon for adding equipment in the “Devices and Printers” section. Right-click on it and select “Delete.” Then connect the printer and wait until it “grabbing” the previously installed software.

Do not forget to rate the entry and share it with your friends on social networks by clicking the special buttons below. Don’t forget to leave a comment and subscribe to our youtube channel