How to install the xerox phaser 3020 printer

Directly (Wi-Fi Direct)

To connect devices via Wi-Fi directly, bypassing the router:

  • In the address bar of your browser, enter the printer’s IP address, which is shown on the printout. The device for printing must be connected to the computer via USB.
  • Enter your administrator login and password.
  • Go to Properties and select Wi-Fi Direct.
  • Enter the required data: name, IP address of the device, group (Activate), password and click Apply.

install, xerox, phaser, 3020

  • Done, now on a laptop or smartphone through the search for Wi-Fi networks, find the created access point and connect to it.

The printer will be detected as a connected device and will be available for printing.

Download the full version of the user manual HERE.

Wi-Fi connection

Since the printer has its own Wi-Fi module, it is able to connect in two wireless modes: to a home network router and directly to a computer (laptop), which has its own Wi-Fi adapter.

The printer comes with a disc containing the proprietary Xerox Easy Print Manager software. It contains a set of drivers and access to the setup and printing environment. But you can also use the web interface for configuration.

Plug in the printing device, start it up, put a sheet of blank paper in the tray, press the WPS button for 10 seconds. The following information is required in the printout of the report for the printer configuration:

  • Device IP address.
  • Default network settings.
  • Local administrator login and password (default login is admin, password is 1111).

You may need this later to set up the connection directly.

On the local network

To connect the printer to the router’s Wi-Fi access point:

  • Connect your device to your computer via USB.
  • Install the drivers from the included disk.
  • Use the Xerox Easy Wireless Setup Utility that is installed with the drivers to start the installation process. You can find it in Start or through the search bar.
  • Click “Next” and wait for the utility to present the “Select a wireless network” window.
  • Select your home network by SSID and click “Advanced settings”.
  • Enter your password, click “Next” and “Finish”.

Now you can use the web interface through a browser for further settings, for example, to directly connect the printer to a laptop (smartphone) without wires.

How to connect a Xerox Phaser 3020 printer via Wi-Fi: all methods

Printers that can work on a home LAN have become commonplace for the public and are widely used as a printing tool. Let’s dwell on a good option for home and small office Xerox Phaser 3020 and carry out its initial configuration via Wi-Fi.

For an overview of the printer, see the following

The Xerox Phaser 3020 with Wi-Fi setup is the perfect solution for home and small offices. Setting up a connection is quite simple both on the router’s network and directly.

If you need to provide access to printing outside the local network, additionally activate the “Cloud Print” function in your own Google profile and manage printing through your account on the second synchronized device from anywhere in the world.

On the local network

To connect the printer to the router’s Wi-Fi access point:

  • Connect your device to your computer via USB.
  • Install the drivers from the included disk.
  • Use the Xerox Easy Wireless Setup Utility that is installed with the drivers to start the installation process. You can find it in Start or through the search bar.
  • Click “Next” and wait for the utility to present the “Select a wireless network” window.
  • Select your home network by SSID and click “Advanced settings”.
  • Enter your password, click “Next” and “Finish”.

Now you can use the web interface through a browser for further settings, for example, to directly connect the printer to a laptop (smartphone) without wires.

Directly (Wi-Fi Direct)

To connect devices via Wi-Fi directly, bypassing the router:

  • In the address bar of your browser, enter the printer’s IP address, which is shown on the printout. The device for printing must be connected to the computer via USB.
  • Enter your administrator login and password.
  • Go to Properties and select Wi-Fi Direct.
  • Enter the required data: name, IP address of the device, group (Activate), password and click Apply.
  • Done, now on a laptop or smartphone through the search for Wi-Fi networks, find the created access point and connect to it.
READ  The Computer Does Not See The Printer Over Wi-Fi

The printer will be detected as a connected device and will be available for printing.

Download the full version of the user manual HERE.

How to connect a Xerox Phaser 3020 printer via Wi-Fi: all methods

Printers that can work on a home LAN have become commonplace for the public and are widely used as a printing tool. Let’s dwell on a good option for home and small office Xerox Phaser 3020 and carry out its initial configuration via Wi-Fi.

For an overview of the printer, see the following

Wi-Fi connection

Since the printer has its own Wi-Fi module, it is able to connect in two wireless modes: to a home network router and directly to a computer (laptop), which has its own Wi-Fi adapter.

The printer comes with a disc containing the proprietary Xerox Easy Print Manager software. It contains a set of drivers and access to the setup and printing environment. But you can also use the web interface for configuration.

Plug in the printing device, start it up, put a sheet of blank paper in the tray, press the WPS button for 10 seconds. In the printout of the report, the following information is required to configure the printer:

  • Device IP address.
  • Default network settings.
  • Local administrator login and password (default login admin, password 1111).

This may be needed later to set up the connection directly.

The Xerox Phaser 3020 with Wi-Fi setup is the perfect solution for home and small offices. Setting up a connection is quite simple both on the router’s network and directly.

If you need to provide access to printing outside the local network, additionally activate the “Cloud Print” function in your own Google profile and manage printing through your account on the second synchronized device from anywhere in the world.

We accept for payment:

“Gift certificate” from our Training Center is the best gift for those who are dear to you! Pay tuition and present your family and friends with tuition for any of the courses.

“Certificate for repeated training” gives the opportunity to repeat training in our Training Center with a discount of 1000 rubles!

Wi-Fi connection setup user manual

Home network printers have become commonplace for the public and are widely used as printing tools. Let’s dwell on a good option for home and small office Xerox Phaser 3020 and carry out its initial configuration via Wi-Fi.

For an overview of the printer, see the following

Xerox Phaser 3020 Printer

Printer page on the official website: http://www.xerox.ru/catalog/146/1031319/

The Xerox Phaser 3020 printer is far from the smallest printer in its price category, there are also smaller ones, but, unlike more compact models, it is not deprived of some useful elements.

Wi-Fi connection

Since the printer has its own Wi-Fi module, it is able to connect in two wireless modes: to a home network router and directly to a computer (laptop), which has its own Wi-Fi adapter.

The printer comes with a disc containing the proprietary Xerox Easy Print Manager software. It contains a set of drivers and access to the setup and printing environment. But you can also use the web interface for configuration.

Plug in the printing device, start it up, put a sheet of blank paper in the tray, press the WPS button for 10 seconds. The following information is required in the printout of the report for the printer configuration:

  • Device IP address.
  • Default network settings.
  • Local administrator login and password (default login is admin, password is 1111).

This may be needed later to set up the connection directly.

Directly (Wi-Fi Direct)

To connect devices via Wi-Fi directly, bypassing the router:

  • In the address bar of your browser, enter the printer’s IP address, which is shown on the printout. The device for printing must be connected to the computer via USB.
  • Enter your administrator login and password.
  • Go to Properties and select Wi-Fi Direct.
  • Enter the required data: name, IP address of the device, group (Activate), password and click Apply.

The printer will be detected as a connected device and will be available for printing.

READ  How to install the HP mfp 135r printer

Download the full version of the user manual HERE.

What I liked about him

Here are a few details that served as the reasons for the purchase, and the observations that pleased me after:

  • AirPrint support is an essential feature for those with an iPhone or Mac. Allows you to connect and use a printer without any problems! Everything is in the style of Apple. plugged in, poked into the settings a couple of times and you’re done!
  • Built-in WI-FI. where can we go without it now! Whether at home or in the office, you always want to reduce the number of wires and simplify printing from devices. The only thing to note is that fine-tuning the printer can be done either through the native application that comes with the drivers, or through the web interface. Supports WPS and Direct Print!
  • The presence of a normal tray as for blank paper. and for prints! Some printers from this price category do not have them. you have to put 10 blank sheets of paper, and then catch the prints at the exit. Everything is in place here! Perhaps there are no adjustable side “clamps”, but these are trifles.
  • Power saving mode, which is very configurable! You can configure both power saving mode and automatic power off at different intervals.
  • Support for Google Cloud Print. of course, very few people need this function, but it works and sometimes solves the issue of printing from any device that, well, does not want to print at all on this printer! For example, when the native Android app just refuses to see the printer =).
  • The compactness of the case is also a nice plus. Maybe he is not the smallest, but he has no “prominent” sides! It can be placed both on a table and on a computer system unit or even on a windowsill (unless the power cable will interfere a little =)). the width and height allow it to take up space more reasonably.

Xerox Phaser 3020 Printer with AirPrint and WI-FI

Dedicated to all victims of the original Keroh instructions on setting up Wi-Fi. Connection method without using a disk and drivers from bad. Tested under vin10, but should work under vin7 and vin8.1. after installing the cartridge, connect the printer to the computer via USB, the computer must select the driver itself. 2. make a test print by selecting the appropriate printer. If the printer has completed your print job, proceed to the next step. 3. hold down the “cancel print” button for more than 4 seconds and get a printout of the printer parameters. // this is the only useful thing that is written in the native instruction 4. in the list of Wi-Fi networks available to your computer, find something similar to DIRECT-ERPhaser 3052 and connect to it using the set of numbers in the second line from the bottom of the second sheet obtained in As a result of step 3, this is the wps-key of the network distributed by the printer. 5. on the second page that the printer will give you after completing step 4 in the fifth line from the bottom there will be an IP address starting with 192. this is the address that you need to enter in the browser to get into network settings of the printer6. you will be taken to the almost-admin panel of the router built into the printer, about which you have already read a lot in the “native instructions” ™ 7. in the admin panel you need to click the “properties” button and enter the username / password admin / 1111 for real login to the admin panel (these login and password are also indicated in the native instructions) 8. on the left at the bottom of the admin panel you will see the inscription wi-fi, and there is another wi-fi. Enter this section of the menu.9. click the “wizard” button in the “Wafay settings” section on the right.10. you will see a list of Wi-Fi networks that the printer “sees”. I will immediately warn the 5 GHz network, he does not see. 11. select the network and enter its password TWICE. 12. you almost won. 13. in the Windows control panel in the “devices and printers” section of your computer, 2 network may or may not appear printer, this is in addition to the printer that appeared when you first connected the printer on usb14. if 2 network printers did not appear, then click the “add printer” button and from the list sequentially add the one whose name contains the name of your printer and the second one with the name similar to XRX9C934E3B1626. add MANDATORY BOTH! 15. make a test print by sending a job to a device with a name similar to XRX9C934E3B162616. if everything is ok. enjoy life. If something went wrong, I can’t help you anymore :). Find a technician. After these procedures, your printer should always be available for printing. Steps 13-15 must be performed on each computer on the network from which you intend to print to the printer. You may also have to perform steps 1-2 on each computer in the network, “but this is not certain” :).

READ  Laser Color Photo Printer

Who is this printer for?

The answer to this question is clear and understandable. a home or a small “home” office. The thing is that:

  • the resource of one cartridge is declared up to 1500 pages, in fact it turns out to be less;
  • the cartridge is not so easy to refill, but costs half of the printer;
  • a cold start takes about 10 seconds;
  • print speed 20-25 pages per minute.

The printer is convenient and compact. set it up, set it up and forget it! Just right for home!

Home network printers have become commonplace for the public and are widely used as printing tools. Let’s dwell on a good option for home and small office Xerox Phaser 3020 and carry out its initial configuration via Wi-Fi.

For an overview of the printer, see the following

On the local network

To connect the printer to the router’s Wi-Fi access point:

  • Connect your device to your computer via USB.
  • Install the drivers from the included disk.
  • Use the Xerox Easy Wireless Setup Utility that is installed with the drivers to start the installation process. You can find it in Start or through the search bar.
  • Click “Next” and wait for the utility to present the “Select a wireless network” window.
  • Select your home network by SSID and click “Advanced settings”.
  • Enter your password, click “Next” and “Finish”.

Now you can use the web interface through a browser for further settings, for example, to directly connect the printer to a laptop (smartphone) without wires.

Installing the Xerox Phaser 3100MFP Printer on Windows 10

Installing a Xerox Phaser 3100MFP printer on Windows 10 is not difficult, the problem is getting the scanner to work. Xerox doesn’t want to release a software package to support Windows 10 of this printer, and in vain, because fig I’m now buying something from Xerox. And I will not advise others.

In general, the scanner does not officially work on Windows 10. Let’s make.

First of all, follow this link and download Windows 7 Drivers and Utilities:

We need the XeroxCompanionSuite_V1_2_5UL.exe file.

We accept the license agreement, Next.

We choose to install only drivers. We do not need to install applications. Further.

You do not need to reboot. To complete.

If we try to scan something now, we will get an error:

Now follow this link and download the Xerox Phaser 3100 Windows 8 x64 Print Driver:

We need the PH3100_x64_v11.0.1.17.zip file.

Unpack the archive and find the WIALFFV2SCN.dll file inside.

Find the Windows Image Download Service (WIA) service, stop.

Copy and replace the WIALFFV2SCN.dll file to the C: \ Windows \ System32 folder.

Start the Windows Image Download Service (WIA) service.

There is a possibility that Windows will then restore the DLL to the old one. You can replace the file somehow differently. But I’m too lazy to figure it out.

After updating Windows ran into error:

Stopped the Windows Image Loading Service (WIA) service again, replaced the dll file, started the service. Everything worked.

If you search, the old WIALFFV2SCN.dll file can also be found in the folder:

The problem is that there are not enough rights to replace. Right-click on an unnecessary file, Properties Security Advanced Change owner. And we change the “System” to ourselves. The file can now be replaced. If it does not help, then change the owner of the folder in the same way:

Now it should definitely help. After the replacement, I returned the owner rights to the “System” user again.

NNCXV.INFO 2021