How to open your Sony TV remote

Settings

Corresponding touch-sensitive remote controls were produced specially for these series of devices. Such equipment is much easier to configure in contrast to conventional push-button options, since all commands are displayed with a characteristic response on the display. Let’s take a closer look at how this equipment is configured:

  • first of all, it is necessary to make an appropriate reset of the settings present in the device to the factory value;
  • subsequently, the device is switched to the appropriate encoding search mode from the TV;
  • then the TV is turned on, after which the device is aimed at the module that emits a signal;
  • then the screen displays the relevant information regarding the device with which the pairing occurs;
  • upon completion, you only have to save all the relevant settings using a specific command.

It also provides not only automatic, but also manual adjustment. To do this, you have to select the appropriate manufacturer in the device, as well as a series of equipment. Further, all parameters are saved and the subsequent test application of commands.

open, your, sony, remote

Important! Immediately before the configuration, the parameters are reset, so that later failures do not occur, and the new encoding is registered in the proper order.

On the phone

If necessary, all TV control can be performed directly from the smartphone. In order to carry out such a setting, it is necessary to install a special plug-in on the mobile device, which is freely available on the Internet. Next, a corresponding search for the available encoding is carried out, which is transmitted from the TV. In the case of manual configuration, you have to choose a specific model, and in addition, a line of equipment, in order to then carry out the necessary control from a smartphone. Unlike remote controls, phones do not need a preliminary reset, but such gadgets do not provide full access to all functions.

How to choose a remote control for your Sony Bravia TV

It’s hard to imagine modern life without television. Televisions have become an integral part of everyday human life. These devices act as a powerful information provider, as well as a way of entertainment when watching interesting movies, TV shows and TV shows. Of course, such devices are equipped with everything necessary for control, however, remote control of devices is most often used. In practice, a Sony Bravia TV remote control is often used, as it is a widespread and popular brand. This device is universal, and in addition, it is equipped with a touch control with a touchpad. Such a device is multifunctional, however, it can also stop responding to commands. In such a situation, you will need to visually consider how to disassemble the remote control from a Sony Bravia TV, and in addition, eliminate the existing faults if necessary.

There are several types of remotes for Sony Bravia TVs

How to choose a remote control for your Sony Bravia TV

In a situation where the original Bravia device does not work, and besides, the manual and instructions do not help to restore functioning, there is a need to choose a new device, or to contain the appropriate control on the phone. Let’s consider in more detail what is required to select the appropriate model:

  • First of all, you will need to look for a model that will be fully compatible directly with the present TV series.
  • You will need to take into account the available budget to purchase the appropriate remote.
  • It is important to take into account the manufacturer of the equipment, or use a universal device for control.
  • If the buttons on the remote do not work, then when replacing, you will need to take into account not only the TV model, but also the specific assembly with the series.
  • It is imperative to find the appropriate coding for the subsequent remote control of the device.
  • When choosing a suitable model, it is important to consider its functionality, as well as the keyboard layout present.

In this video, you will learn how to choose a remote control:

Important! In practice, in order not to face unpleasant consequences when working with the device, after switching on, you will need to wait a short period of time before subsequent commands, which will avoid a situation when the device does not turn on from the remote control due to errors present.

How to disassemble the remote

In practice, remote controls may not respond to commands due to accumulation of dirt and dust. In such a situation, it is required to properly clean all the components of the device, while immediately before cleaning, the device is disassembled in accordance with the prescribed procedure. In practice, such a procedure is carried out as a regular service, since touchscreen consoles differ significantly from traditional push-button versions and react to any contact or lack of contact. In this case, in order to disassemble the device before cleaning, the following sequence of steps will have to be performed:

  • You will first need to turn off the device so as not to disrupt its functionality and mode of operation.
  • Subsequently, the batteries used to power such a device are removed.
  • The next step is to carefully unscrew all the screws present on the back panel that hold the structure.
  • After that, it is necessary to carefully detach the present protective back cover from the device.
  • Next, a sequential parsing of all the modules present is carried out, with the exception of the sensor unit.
  • You will also have to carefully disconnect all the keys present in the device and their contacts.
  • Subsequently, a full cleaning of the device is carried out using the necessary devices.
  • At the final stage, a sequential assembly of the device is carried out, followed by a check of the device for operability.

Important! When parsing small elements, it is very important not to damage the contacts present on the circuits, since they are extremely sensitive to any mechanical stress from the outside.

Cleaning

After the device is completely disassembled, a full-scale cleaning of the device will have to be performed. In such a situation, it is recommended to use components that do not contain moisture or other liquid. This will require the use of cotton swabs, as well as the usual alcoholic wet wipes. In practice, excess dust and accumulations of dirt are removed with cotton swabs, after which the individual element is gently wiped with a napkin. Subsequently, after all the elements have been cleaned of the present dirt and dust, it is only necessary to completely dry the elements from moisture that got when wiping the devices with a damp cloth. Only after the complete drying of these elements is the subsequent collection of the entire structure, followed by testing for performance. All external elements, including the sensor, need to be cleaned routinely with napkins.

Information about codes is usually contained in the instructions

Of course, each remote control device has the necessary encoding to work with the TV when fully pairing the devices. In practice, manual or automatic input of values ​​is required to carry out the conversion. If all the necessary data is not registered in the device. You will need to find them first. As a rule, such data is contained in the following places:

  • In certain situations, such information is contained in the instructions that come with the equipment.
  • This data may be present in the user manual for your Sony Bravia TV model.
  • You can find the appropriate encoding on the official website of the manufacturer of such technical equipment.
  • Information is available in service centers where repairs and diagnostics of such electrical equipment are carried out.
  • You can also find everything you need in the public domain on the Internet, where the data is present in the clear form on forums and certain sites.

It should be understood that the coding for each individual device may be different or correspond to a specific line of electronic equipment.

Important! Today, television is in great demand, which is why televisions are used everywhere, but we should not forget that these devices always work in conjunction with additional components, which is why timely maintenance is carried out not only for televisions, but also for remote controls.

Breakdown reasons

The technician can identify the problem in a few minutes, but he will use special tools and equipment. Ordinary users may not have such knowledge and skills, therefore they are forced to seek help from specialists. But do not make hasty conclusions and immediately run in panic to the nearest workshop. The reason for the failure can be so commonplace that it will take a few simple steps to restore the device.

READ  How to Start Scanning to a Printer

The most common causes of remote control breakdown include the following:

  • Discharged batteries. It is recommended to replace the batteries or check the functionality of the old ones. Use a voltmeter or tester to measure the power supply. The minimum indicator should be at 1.3 V.
  • Different signal frequency. You need to pair it with a TV receiver. If the device is used simultaneously for several electronic devices, you need to make a separate binding for each.
  • Individual buttons may not work. The reason is usually the ingress of dirt or moisture, but sometimes we are talking about mechanical damage resulting from a fall or impact.
  • Pressing one of the keys executes the command of the other.
  • The malfunction lies in the operation of the TV itself.

If the user spills liquid on the device, it is recommended to disassemble and clean it. Water becomes a short-circuit catalyst and settles under the rubber components to form a sticky consistency. The sticky layer on the contacts must be removed with a soft cloth soaked in alcohol, or use a cotton swab for this purpose.

Self-repair of the device

Experienced users can independently determine the malfunction of the remote control module and, if the problem is minor, carry out repairs. Armed with a thin lancet, you need to open the lid around the entire perimeter. The upper part, together with the keyboard, can be easily separated; under it there will be a board with buttons. The keys are made of plastic, and on the inside they are covered with a thin metal.

The contact group is separated from the board; this must be done carefully. The working state of the buttons is checked by means of a tester. Two contactors will need to press the desired button at the same time. If a short circuit occurs, the device will begin to play a sound signal, and its absence will tell about a malfunction of the buttons.

It is possible to solve the problem of wear of the metal coating on your own. For repairs, it is recommended to use a special conductive silver-based adhesive. A little adhesive is applied to the tip of the toothpick, after which it is painted over the inner side of the keys. After the glue is dry, the tester should show satisfactory results. Next, reassembly is performed, the contacts are aligned in their places with the board, and the case snaps into place around the entire perimeter. The operating status of the remote control can be checked using the camera on the phone.

Add a comment

Leave your question through the feedback form and the master will call you back and answer without imposing any services.

A failed remote control can cause a lot of trouble for a modern person and cause a feeling of discomfort. It becomes impossible to watch your favorite programs, or you have to get up from the chair and press the TV buttons every time. If your Philips TV does not respond to the remote control, there are many reasons for this.

What you need to do

In the process of parsing, you need to have a few simple tools at hand:

  • small diameter Phillips screwdriver;
  • flat screwdriver with a thin edge;
  • knife;
  • plastic card or guitar pick.

The body of the device can be fixed with glue. Subsequently, the glue will be needed again to carry out the assembly after the successful completion of cleaning or repairing the remote control.

Why the TV receiver does not respond to the remote control module

To find the reason why your Philips TV is not responding to the remote control, we recommend that you follow these steps:

  • The first step is to check whether the TV itself responds to the command of the button. Can be reset by unplugging all wires and accessories such as antenna cable, HDMI cable, CI module
  • Then unplug the network cable from the outlet and leave the TV off for a few minutes, the LED indicator should go out.
  • After connecting the power plug, you should try to start the receiver using the remote control module.
  • Change batteries. Batteries have their own lifespan, discharged cells will need to be replaced with new ones.

If the TV does not start, the cause of the malfunction lies in the remote control itself. If the receiver turns on, all cables and accessories must be reconnected. It is better to check each external device, it may cause the plasma display not to respond to signals from the remote control.

The functionality of the remote control can be verified with one simple test. You will need a smartphone equipped with a digital camera. The human eye is not capable of detecting infrared radiation, but a mobile phone with a camera turned on will notice it. For iPhone or iPad owners, this recommendation will not work, since these gadgets are equipped with a special infrared filter. You need to do the following:

  • after activating the camera of the mobile device, direct the indicator light of the remote control module to its lens;
  • on the remote control, press any button, for example, the channel switch key.

The LED lit up on the TV receiver will tell you about the serviceability of the remote control. If the LED does not respond, the remote control needs to be repaired or replaced.

Features of disassembling the touch panel

The touch panel is disassembled in a similar way. Many companies equip their devices with modern remote controls with touch sensors. Despite the significant difference in the principle of control between conventional remote controls and sensors, the touch sensor in Samsung TV does not interfere with parsing.

IMPORTANT! Try not to spoil the cables that connect the touch sensor to the board. Remove these parts from the plastic sheath, handling the sensor as carefully as possible.

Samsung TV and its competitors are equipped with approximately the same additional devices. Disassembling a remote control from Samsung or any other brand is not difficult if you imagine the general principle of the design of these devices.

Video tutorial: how to open the PHILIPS TV remote control

Any household appliances are subject to wear and tear, especially for such small appliances as a remote control. As a rule, many have it lying around anywhere. often than others, this household item is at risk of being crushed or drenched in sweet tea while watching your favorite show. How to fix the remote control without being a master, we will tell you in this article.

Sequencing

Simple instructions for opening almost any modern remote control:

Sony Bravia TV remote control RM-ED044 battery replacement! How to open and to change the batteries.

  • Examine the console for placement of fasteners. Some manufacturers put some of the screws in the battery compartment. Remove the batteries;
  • Take a screwdriver of a suitable size and remove all fasteners;

There may be a difficulty in the question. how to disassemble the remote control from the LG TV, which has no screws? Pay attention to the seams on the sides of the device. It is necessary to create gaps at the joints, then widen the slots and pry off to remove the plastic shell. Step-by-step instructions, with a description of the nuances:

  • Check the seams on the body. If they are glued together for security, use a knife or flat head screwdriver to pry the edges of the case with them until the edges part;
  • To disassemble the remote control from the sony bravia TV, like many other devices of this type, you need to move the latches located inside the case with a knife. Do not pull the halves of the case in different directions at once, go around the edges with the blade and feel for hidden fasteners. Squeeze them out gently;
  • Run a plastic card along the joints between the cases to finally unclench the plastic and open the remote control;
  • Take out the keyboard;
  • Unscrew the microcircuit carefully without removing the sensor from it;
  • Carry out the necessary manipulations to clean or repair the product.

How do I open the remote if the plastic is sitting on the mounting screws and there is no Phillips screwdriver nearby? Fasteners can be rolled up with the tip of a knife. It will be convenient to take for this purpose a knife with a curved blade at the end.

IMPORTANT! Try not to cut your hands. if you have fine motor problems, put on a thick work glove first. Regardless of your confidence in your dexterity with tools, choose a dull knife.

The philips remote can be easily snapped off with even simple tweezers. In Phillips, the top cover mount can be slightly recessed into the plastic of the back surface. How to properly disassemble the remote control in this case? Gently pry the cover along the seams, and preferably not with a blade. A knife can scratch the lid and ruin its appearance. There is also the danger of accidentally passing a sharp edge over the buttons. If you damage something, it’s okay. remotes from Samsung and other mainstream TV manufacturers are inexpensive, and in some cases are interchangeable.

Model rmctpj1ap2. original Samsung TV remote control.

The parsing process does not fundamentally differ from the already described scheme. If you still can’t open the TV remote control, try pushing from the narrow edges to make the plastic slide out of the grooves.

Sequencing

Simple instructions for opening almost any modern remote control:

  • Examine the console for placement of fasteners. Some manufacturers put some of the screws in the battery compartment. Remove the batteries;
  • Take a screwdriver of a suitable size and remove all fasteners;

There may be a difficulty in the question. how to disassemble the remote control from the LG TV, which has no screws? Pay attention to the seams on the sides of the device. It is necessary to create gaps at the joints, then widen the slots and pry off to remove the plastic shell. Step-by-step instructions, with a description of the nuances:

  • Check the seams on the body. If they are glued together for security, use a knife or flat head screwdriver to pry the edges of the case with them until the edges part;
  • To disassemble the remote control from the sony bravia TV, like many other devices of this type, you need to move the latches located inside the case with a knife. Do not pull the halves of the case in different directions at once, go around the edges with the blade and feel for hidden fasteners. Squeeze them out gently;
  • Run a plastic card along the joints between the cases to finally unclench the plastic and open the remote control;
  • Take out the keyboard;
  • Unscrew the microcircuit carefully without removing the sensor from it;
  • Carry out the necessary manipulations to clean or repair the product.
READ  How to close open apps on 10 iPhones

How do I open the remote if the plastic is sitting on the mounting screws and there is no Phillips screwdriver nearby? Fasteners can be rolled up with the tip of a knife. It will be convenient to take for this purpose a knife with a curved blade at the end.

IMPORTANT! Try not to cut your hands. if you have fine motor problems, put on a thick work glove first. Regardless of your confidence in your dexterity with tools, choose a dull knife.

SONY REMOTE CLEAN & CLOSE

The philips remote can be easily snapped off with even simple tweezers. In Phillips, the top cover mount can be slightly recessed into the plastic of the back surface. How to properly disassemble the remote control in this case? Gently pry the cover along the seams, and preferably not with a blade. A knife can scratch the lid and ruin its appearance. There is also the danger of accidentally passing a sharp edge over the buttons. If you damage something, it’s okay. remotes from Samsung and other mainstream TV manufacturers are inexpensive, and in some cases are interchangeable.

Model rmctpj1ap2. original Samsung TV remote control.

The parsing process does not fundamentally differ from the already described scheme. If you still can’t open the TV remote control, try pushing from the narrow edges to make the plastic slide out of the grooves.

What you need to do

In the process of parsing, you need to have a few simple tools at hand:

  • Small diameter Phillips screwdriver;
  • Thin-edged flat screwdriver;
  • Knife;
  • Plastic card or guitar pick.

The body of the device can be fixed with glue. Subsequently, the glue will be needed again to carry out the assembly after the successful completion of cleaning or repairing the remote control.

How to properly disassemble the TV remote control

This article covers disassembly of remote controls in detail. You will learn how to disassemble a Samsung TV remote, or just about any model from other manufacturers. The device of the Remote Control (Remote Control) is very simple, so different companies use the same assembly principles. Whether it is Panasonic or Philips, you most likely will not come across new design solutions in this area. The scheme below will work regardless of the manufacturer’s brand.

To disassemble the TV remote and not damage anything in the process, you need to choose the right tools and control your movements.

Features of disassembling the touch panel

The touch panel is disassembled in a similar way. Many companies equip their devices with modern remote controls with touch sensors. Despite the significant difference in the principle of control between conventional remote controls and sensors, the touch sensor in Samsung TV does not interfere with parsing.

IMPORTANT! Try not to spoil the cables that connect the touch sensor to the board. Remove these parts from the plastic sheath, handling the sensor as carefully as possible.

Samsung TV and its competitors are equipped with approximately the same additional devices. Disassembling a remote control from Samsung or any other brand is not difficult if you imagine the general principle of the design of these devices.

Popular TVs of 2018

LG 43UK6200 TV on Yandex Market

Sony KD-55XF9005 TV on Yandex Market

LG 49UK6200 TV on Yandex Market

Sony KD-65XF9005 TV on Yandex Market

LG OLED55C8 TV on Yandex Market

TVs, despite the variety of brands, sizes and models, have one thing in common. they each have a remote control. This small device allows us to enjoy watching our favorite programs and TV series comfortably and with all the conveniences. But sometimes, by accident, it can turn off due to blocking. We will tell you how to quickly solve this unpleasant problem.

How to unlock your TV remote: universal ways

There are methods to return the device to working condition, which are common to all models, regardless of the manufacturer and other characteristics. If you have saved the operation manual, then use the section that describes possible malfunctions and how to fix them. For a locked console, this can be a special key combination. If you have lost the instructions, you can search for it on the Internet.

ATTENTION! Before using the methods below, make sure that the rechargeable batteries (or batteries) are in working order.

Button options and combinations that work on most devices:

  • Remove the batteries from the remote control. Press and hold the power key while inserting the batteries.
  • Can help continuously press any button for 10 seconds.
  • Try pressing “” and “P” at the same time. If the LED is continuously on, then hold down the buttons and type the sequence: “Channel plus” and “Menu” (or “Sound” and “Menu”).
  • While holding “P” and “plus” you can apply the universal sequence, “1234”. Or it can be a combination of identical characters, for example “1111”.

IMPORTANT! The indicated combinations must be completed with the key “”.

Universal remotes

If the remote control cannot be returned to work, you will need to purchase a new original remote control or use a universal one, for example, released by Huayu. This manufacturer manufactures remote controls for both television panels and cable TV set-top boxes (including MTS and Rostelecom).

To set up the remote control to work with a certain technique, you need to use the instructions for it, which contain the codes. Here you need to find the brand of your TV and follow the indicated steps.

Advice! To unlock universal remotes, you must also use the instructions or try common codes.

Thus, if the TV remote control turned out to be blocked for some reason, the first thing to do is to use the instructions and look for the answer to the question in it. If it is lost or the necessary information is missing, there are a number of universal combinations for unlocking the remote control. Most likely, one of them will help fix the problem. Otherwise, you will need to purchase a new device or contact the service specialists to resolve the issue.

Remotes from other brands of TV sets

For TV panels from other manufacturers, for example, Sony Bravia, Supra or Thomson, to unlock the remote control, you must first look at the instructions. If there is no solution to the problem in it, you need to act in the ways already described for other brands of television equipment. First try to remove the batteries, and then, while holding the power button, put them back. This usually helps. Otherwise, you need to try to enter the universal unlock codes. If this does not lead to a positive result, you should contact the service center specialists or get a new TV receiver control device.

Samsung

Locking the buttons on the remote control from Samsung TV panels often means that the protection mode has been activated, which could have happened when the remote control was dropped or other mechanical impact on it. To remove the protection, you need to remove the batteries, press “Power” and, while holding the key, put the batteries back. This will unlock the remote.

Samsung TVs have the “Hotel Mode” option used in hotels and hotels. It is designed to partially block the functions of the remote control, so that using the device you can only switch channels and adjust the volume. To remove this protection, you must open the service menu. This can be done in one of several combinations:

  • sequentially press the buttons “Display”. “Menu”. “Power”;
  • “Mute”. “1”. “8”. “2”. “Power”;
  • for TVs assembled in Europe: “Standby”. “Display”. “Menu”. “Mute”. “Power”.

In the service menu, you need to find the “Hotel” mode and move the slider from the “On” position to the “Off” position.

To unlock the remote from the LG TV Panel, you also need to remove the batteries and put them back while holding the power button. If this method does not help, you should successively press the arrow buttons: “up”, “down”, “left”, “right”, then shake the remote control. If these actions did not bring results, you can try universal options.

Advice! The lack of a positive result after all the above manipulations will also speak of the need to contact the manufacturer’s service center to unlock or replace the product.

How to unlock your Sony TV remote

If the remote control falls into the hands of children or animals, or is misused by an adult, it may become blocked. In this situation, you need to know how to unlock the TV remote control in order to fully use its capabilities.

Ways to unlock TV remotes of various brands

Depending on the manufacturer, methods of restoring the device to work may differ.

The expert’s answer: how to clean the TV remote control

Let’s summarize, the remote control is a very important thing in the house, which is difficult to do without. However, without proper protection and care, the TV remote control will quickly become dirty, both externally and internally. To avoid this, you should use a cover or wipe the device from time to time, both externally and internally. In order to open the remote control, you should use a screwdriver or, in extreme cases, a knife, with which you should unscrew the screws and open the cover. Sometimes modern remotes are closed with latches, in this case you need to carefully open the lid along the edge until it completely comes off.

READ  Why files won't open on iPhone

Instructions: how to disassemble the Sony TV remote control

It’s always a good idea to wipe the inside of the remote, but you need to open it first. Most remote controls today are easy to open with a screwdriver, however there is a very different category of TV remotes that are generally held together without screws. These are remotes from new Sony TVs. However, it is actually not so difficult to open them, for this you should take a knife or a screwdriver, the latter will be even better, and gently pry off the junction of the remote control cover with the tip. You will find that the device opens slightly.

It is better to disassemble the Sony TV remote control according to the instructions that can be found on the Internet.

Do not try to open the remote control completely in one place at once, otherwise you will simply rip off all the fasteners. Carefully, step by step, open the lid, moving along its perimeter and gradually opening.

This operation may not work for you the first time, but the main thing is to pry the lid well from the beginning and then just do not rush. Even if you hear that one of the mounts has cracked, it doesn’t matter, the lid will stick to the rest. But be careful, as completely ripped off fasteners means you will have to reattach the cover.

How to clean a TV remote control: disassemble sony remote control, cleaning at home

You can disassemble the TV remote control and clean it yourself if you approach this process correctly The remote control is an important thing in the house. However, to appreciate the ability to change channels and adjust the volume of the TV without getting up from the couch, they usually start when the battery runs out or the remote control starts to work poorly. Replacing the battery is an elementary task, but it’s a completely different matter when the remote control simply starts to work poorly. Usually the reason is simple. the mechanism clogged, the buttons began to be pressed poorly and it becomes clear that the device should be urgently disassembled and cleaned. How to do it right?

First of all, it is worth noting that any equipment in the house should be well looked after. Only in this case it will work efficiently and will serve you for a long time. The remote control is a small, but still a piece of technology. over, the lion’s share of the load falls on it, because you constantly pick it up and press the buttons. To ensure that the remote control lasts longer without the need to clean it, you should only use it with clean hands. Very often the remote control becomes clogged due to the fact that it is taken with dirty hands.

To make the remote control less dirty, it must be properly looked after.

Eating in front of the TV is not only harmful to health, but also to equipment that comes to hand. Small particles of food get inside and render the devices unusable.

Try, if you are eating in front of the TV, complete the meal completely, wash your hands and only then continue to work with the remote control.

How to disassemble the Sony BRAVIA TV remote control?

Complete disassembly of the Sony BRAVIA TV remote control

The TV remote control may fail at any time. And if you were wondering how to disassemble the Sony BRAVIA TV remote control, then you definitely need our help.

We often encounter stuck buttons on this device, this can be easily dealt with at home. Secondly, the remote control must be cleaned from dust and dirt. Often, due to the ingress of foreign objects into the device, it does not work correctly.

We strongly recommend that you consider before starting your DIY repair. Entrust the job to professionals. contact a Sony TV repair service center.

So let’s get started. First, take a small screwdriver and unscrew any screws you see. It’s not difficult, the main thing is, be careful.

The remote control is not very difficult to open, but you should use a knife and push back the latches, thanks to which it closes. First, open it slightly, but do it in such a way that the appearance of the device is not damaged. You need to separate the top of the case from the bottom.

The keys of the device are rubber, they can be wiped off with a clean damp cloth. The microcircuit, if it stopped working, can also be wiped with a solution of m alcohol. Just don’t overdo it. Allow the parts to dry well before assembling the device.

The remote control will only work stably and correctly if you assemble it correctly, also please note that if any parts of the device are damaged, it will not function even after you disassemble it.

You can ask a question to the masters from our service center by calling by phone or by writing your question on the feedback form.

Step by step instructions: how to clean the TV remote control at home

Disassembling the device: how to clean the TV remote

In order to clean the remote control, it must first be disassembled. Depending on the manufacturer of the TV, the remote control can be closed in different ways. Some firms make simple latches that can be opened without a screwdriver, while others use screws and it will be impossible to wash the remote inside without a tool.

In order to properly clean the remote control, it must be properly disassembled

The main TV manufacturers today are:

The advice is that almost any remote control can be opened with a knife by unscrewing the screws with its tip. However, you should be guided by the situation. If it is difficult to unscrew the screws with a knife, you can rip off the threads, and in the future the screws will sit tightly. Ideal, of course, would be a small Phillips screwdriver.

When you open the remote, be careful and careful. It is important not to displace connections and parts, otherwise you may get confused and not know how to put everything back in its place. There is no need to wipe the microcircuit and the board, the most important thing is just to get rid of the dust. Alternatively, you can vacuum the remote control inside with the lowest traction power.

It’s always a good idea to wipe the inside of the remote, but you need to open it first. Most remote controls today are easy to open with a screwdriver, however there is a very different category of TV remotes that are generally held together without screws. These are remotes from new Sony TVs. However, it is actually not so difficult to open them, for this you should take a knife or a screwdriver, the latter will be even better, and gently pry off the junction of the remote control cover with the tip. You will find that the device opens slightly.

It is better to disassemble the Sony TV remote control according to the instructions that can be found on the Internet.

Do not try to open the remote control completely in one place at once, otherwise you will simply rip off all the fasteners. Carefully, step by step, open the lid, moving along its perimeter and gradually opening.

This operation may not work for you the first time, but the main thing is to pry the lid well from the beginning and then just do not rush. Even if you hear that one of the mounts has cracked, it doesn’t matter, the lid will stick to the rest. But be careful, as completely ripped off fasteners means you will have to reattach the cover.

How to clean the remote control: care rules

First of all, it is worth noting that any equipment in the house should be well looked after. Only in this case it will work efficiently and will serve you for a long time. The remote control is a small, but still a piece of technology. over, the lion’s share of the load falls on it, because you constantly pick it up and press the buttons. To ensure that the remote control lasts longer without the need to clean it, you should only use it with clean hands. Very often the remote control becomes clogged due to the fact that it is taken with dirty hands.

To make the remote control less dirty, it must be properly looked after.

Eating in front of the TV is not only harmful to health, but also to equipment that comes to hand. Small food particles get inside and render the devices unusable.

Try, if you are eating in front of the TV, complete the meal completely, wash your hands and only then continue to work with the remote control.

NNCXV.INFO 2021