How to print a test page on a printer

How to print a test page on the printer and what to do if it does not print correctly?

print, test, page, printer

Often, printer users have to resort to a procedure such as printing a test page. It can help you ensure that the basic settings of your device are correct for printing. In addition, the test page displays all information about the printer model and driver version. All of this information can be very useful and useful in troubleshooting various problems.

How to print a test page?

But often, office equipment users have the following question: how to print a test page? So, in order to perform such a procedure as a test print, you first need to select from the list of services in the “Control Panel” menu. Further, in the section where the entire list of printers is displayed, find the device model that interests you.

Then you might wonder what to do next. Next, you will need to carefully evaluate the test page. it should contain samples of all colors, as well as text and graphics. If this has been done with an inkjet machine, make sure there is no ink drip on the page. If the test done suits you, you can click on the command, which implies saving the default print parameters. Otherwise, go ahead and customize them to suit your needs. For example, you can only check the nozzle test if necessary. This allows you to immediately know which colors print normally and which print with different problems. In addition, a nozzle test is required to make sure that ink enters the printhead in the correct order.

Possible problems

But sometimes the following problem occurs: The test page was printed incorrectly. In this regard, the question arises of what to do in this case and how to print this page.?

So, if the test page is printed incorrectly, then one of the possible problems is old or “broken” drivers. To solve it, you need to download and install their updated version. But what if this action did not help and the problem related to the fact that the printer does not print is still relevant? In this case, give “Everyone” full rights for “C: \ Windows \ System32 \ spool \ PRINTERS”, then delete the required printing device on the “HKEY_USERS \.DEFAULT \ Printers” registry branch. In addition, give a regular user the rights that the administrator has and install a brand new driver under his name. After that, you can revoke the previously granted rights from him. You should also disable UAC. If the steps taken do not help, then you should run the Process Explorer utility and during printing, pay attention to what rights are missing.
If, until recently, a normally printing printer still prints a test page incorrectly, then you can use the Procmon utility from Sysinternals. Run it and configure the “denied” filter by the Result. contains line. Next, run a test page for printing, after which this utility will show you which folder you did not have full rights to. For example, it can be the “TEMP” folder.

It is also worth adding that there is still such a procedure as a stop test, which is used to diagnose a printing device. To use this type of test while printing a page, you must turn off the power, then look at the copy, which has not yet fully exited the device. Using this procedure, you can determine the cause of poor printing, which may lie in the cartridge, transfer of the image to the paper and the fuser.

In addition, sometimes the printer disconnected from the PC does not even print a test page. This problem can be caused by missing or jammed paper, or an improperly installed cartridge. The error can be understood by the indication or by connecting the device to the computer and reading the corresponding decryption in the driver. In general, almost any breakdown, during the operation of the printer, can be done independently, but if you do not know the reason, it is better to use the services of a service center.

How to print a test page in Windows 7

Have you bought a new printer and installed it along with the drivers in Windows? Then your first step should be to print a test page to determine if everything is set up correctly. The process for printing a test page in Windows 7 is very different, so let’s see how to make a test page print on a Windows 7 computer.

The test page provides visual confirmation that your printer is working. It may also contain helpful troubleshooting information, such as printer driver information.

The test page function sends a command directly from the printer driver and thus allows the user to determine if the problem is with a communication problem or a real problem with the application being used.

Printing a Test Page with Windows 7.

Open Start Menu Control Panel Devices and Printers.

Under Printers and Faxes, right-click your printer and select Printer Properties.

3.The printer properties window will open, click the “Print Test Page” button indicated on the “General” tab.

A dialog box appears stating that the test page has been sent to the printer.

Now check the test print page, find and fix problems if any.

Print a test page. we’ll show you how to print a printer test page!

Follow the instructions below to print a test page of your printer. If the print test detects color or legibility issues, your toner or cartridge is low on ink.

How to print a test page on a printer?

After purchasing a new printer, it is very important to check that all elements of the working system are in working order. That’s what the test page is for. How to do it more correctly

How to print a test page

This can be done in several ways. with the help of a computer and without its participation. To test the operation of the printer in the first way, follow this aLGorithm:

  • Click “Start” and in the taskbar on the right, select “Control Panel”;
  • Select “Printers”, in the pop-up window, right-click on the required device. Then, in the pop-up context menu, select the “Properties” section;
  • In the “General” section, click “Test Print”.

IMPORTANT! If you are using the printer for the first time or after a long break in work, you need to wait about 30 seconds. This time is needed in order to collect complete information about the operation of the system. The parameters of such a page do not need to be built, they are set by default.

You can check the quality and operation of the device without connecting to a PC. The first step is to load paper into the sheet feed tray. Then you need to press the power button and hold it in this position for 5-10 seconds.

On some models, this button has a piece of paper or the corresponding word written. Also, in models without a display, you must press the “Stop” button, the image on it looks like a triangle in a circle. For devices with a control screen, the following sequence of actions is suitable. “Installation”, “Maintenance”, “Check DYUZ”, “Start” and “Print”.

Windows. How to print a test page on a specified printer?

What to do if the test page came out with defects?

There are several underlying reasons for this situation. First, you need to figure out the source of the problem. As a rule, when issuing a test page, two problems can arise: the device prints a sheet with an image and text of poor quality or does not print at all, does not respond to your commands. There are several solutions to such situations:

  • The problem may be due to the presence of outdated drivers. To restore printer functionality, you must download and install an updated version of the software components. If the work is not restored and you need to expand the rights, do it. disable UAC. Utilities such as Process Explorer and Procmon from Sysinternals will act as assistants.
  • Test page failure can occur due to technical reasons, such as paper out of the sheet feed tray, paper jam, or a cartridge that is not installed correctly in the slot. You can find out if a similar problem has arisen by using the indication (a red light on the device will be on) or by connecting the device to a computer and reading the driver data.
  • The problem can also occur in the device itself. Use the stop test to study printing. To do this, during the printing process, you need to disconnect the printer from the mains and look at the sheet, part of which is still in the device. So you will determine if there is a problem in the component parts of the unit.

IMPORTANT! Practice shows that any problem of this type can be solved independently by adhering to the above instructions.

If the appearance of the test page does not return to normal, contact your office equipment repair company. Do not try to disassemble the device yourself, present it to a professional!

Now you know how important the test page is for further work. The main thing is to correctly print it and correctly eliminate the problems that have arisen.!

BUY PRINTER CARTRIDGES

Missing your printer brand? Cartridges for all brands of printers

This article is part of the Printer and Printing Troubleshooting Guide.

A Printer test page prints to check that text and graphics are printed correctly. The test page usually also displays additional information, such as the version of the driver software that you can use if you need to troubleshoot problems. We have listed links to download drivers for the most common printers. brands. find the driver for your printer here.

Read our print quality note or go to our printer and print troubleshooting guide to resolve any printer issue.

There are three main ways to print a printer test page:

1.Print a test page of your own printer
2. Print a printer test page page provided by the printer software
3. Printing a test page of the printer provided by the operating system

If you need alternatives to the standard test page, you can use the images we link to below.

READ  The printer prints but does not scan what to do

Usage: Click the link which will open a new window. Right-click and select Print Image. »To print a test page. on your printer. Remember to plug in and turn on the printer!

1.Print a test page (color). test page to verify that a large number of colors can be printed correctly.
2. Print a test page (CMYK). a test page for testing CMYK colors in your printer.
3. Print a test page (full test). use this test page to do the full test (grayscale, RGB, CMYK and dotted border lines).

Print a test page (black). Full size black test page
5. Print a test page (yellow). Yellow full size test page
6. Print a test page (cyan). Full size blue test page
7.Print a test page (magenta). Full size magenta test page

Almost all modern printers have built-in capabilities for printing a printer test page. The procedures for this vary. Please refer to your printer’s manual for details on how to do this with your printer. Note that you need to install the CD supplied with your printer to print your own default printer test page.

If you cannot find the manual for your printer, go to the printer’s manual search page.

The following describes how to print a printer test page in Windows XP, Windows Vista, or Ubuntu. If you have other operating systems, search through your documentation for how this should be done.

Assuming you are using Windows XP:
1. Go to the launcher.
2. Click on the control panel and select “Printer and Fax”.
4. Right-click the printer and select its properties.
5. Click the General tab and look at the bottom of the field. Click on the Print Test Page button and your printer will automatically print it.

Assuming you are using Windows Vista:
1. Go to the launcher.
2. Click on the control panel and select Hardware and Sound and click Printers.
4. Right-click the printer and select its properties.
5. Click the General tab and look at the bottom of the field. Click on Click on the “Print a test page” button and your printer will automatically print it.

Assuming you are using Ubuntu:
1. Go to System Administration and Printing
2. Right click your printer and select its properties.
3. Click the Print Test Page button. You will receive a printer test page with the Ubuntu logo and eight different color stripes.

Read our article on printing problems if you have print quality issues. Remember that many things can affect quality, for example:

  • Printer and RIP quality and used color engine
  • Type of paper used
  • Ink and Toner Quality
  • Used color space
  • Used ICC profile

If you installed the CD that came with your printer, you will likely have a built-in feature to self-test the hardware and run the program. which can align and clean printheads.

Top of the Guide for Printing a Test Page!

Other articles about printers and polygraphs

Why you need to print a test page

Such an operation of any device of this kind has several functions:

  • Confirmation of the fact of operation of the device;
  • Checking the print quality, the correct alignment of the color gamut, the absence of ink drips, distortions and irregularities;
  • Checking the basic settings and setting the required parameters.

IMPORTANT! After the test print, the system will ask whether to save the proposed print option. If you are satisfied with the brightness, saturation of the print, click “OK”, if not, go to “Settings”.

c #. how to print a test page on a printer?

How to print a test page

This can be done in several ways. with the help of a computer and without its participation. To test the operation of the printer in the first way, follow this aLGorithm:

  • Click “Start” and in the taskbar on the right, select “Control Panel”;
  • Select “Printers”, in the pop-up window, right-click on the required device. Then, in the pop-up context menu, select the “Properties” section;
  • In the “General” section, click “Test Print”.

IMPORTANT! If you are using the printer for the first time or after a long break in work, you need to wait about 30 seconds. This time is needed in order to collect complete information about the operation of the system. The parameters of such a page do not need to be built, they are set by default.

You can check the quality and operation of the device without connecting to a PC. The first step is to load paper into the sheet feed tray. Then you need to press the power button and hold it in this position for 5-10 seconds.

On some models, this button has a piece of paper or the corresponding word written. Also, in models without a display, you must press the “Stop” button, the image on it looks like a triangle in a circle. For devices with a control screen, the following sequence of actions is suitable. “Installation”, “Maintenance”, “Check DYUZ”, “Start” and “Print”.

How to print a test page on a printer?

After purchasing a new printer, it is very important to check that all elements of the working system are in working order. That’s what the test page is for. How to do it more correctly

Print a test page. We show you how to print a printer test page!

Follow the instructions below to print a test page of your printer. If the print test detects color or legibility issues, your toner or cartridge is low on ink.

Windows. How to print a test page on a specified printer?

Why you need to print a test page

Such an operation of any device of this kind has several functions:

  • Confirmation of the fact of operation of the device;
  • Checking the print quality, the correct alignment of the color gamut, the absence of ink drips, distortions and irregularities;
  • Checking the basic settings and setting the required parameters.

IMPORTANT! After the test print, the system will ask whether to save the proposed print option. If you are satisfied with the brightness, saturation of the print, click “OK”, if not, go to “Settings”.

What to do if the test page came out with defects?

There are several underlying reasons for this situation. First, you need to figure out the source of the problem. As a rule, when issuing a test page, two problems can arise: the device prints a sheet with an image and text of poor quality or does not print at all, does not respond to your commands. There are several solutions to such situations:

  • The problem may be due to the presence of outdated drivers. To restore printer functionality, you must download and install an updated version of the software components. If the work is not restored and you need to expand the rights, do it. disable UAC. Utilities such as Process Explorer and Procmon from Sysinternals will act as assistants.
  • Test page failure can occur due to technical reasons, such as paper out of the sheet feed tray, paper jam, or a cartridge that is not installed correctly in the slot. You can find out if a similar problem has arisen by using the indication (a red light on the device will be on) or by connecting the device to a computer and reading the driver data.
  • The problem can also occur in the device itself. Use the stop test to study printing. To do this, during the printing process, you need to disconnect the printer from the mains and look at the sheet, part of which is still in the device. So you will determine if there is a problem in the component parts of the unit.

IMPORTANT! Practice shows that any problem of this type can be solved independently by adhering to the above instructions.

If the appearance of the test page does not return to normal, contact your office equipment repair company. Do not try to disassemble the device yourself, present it to a professional!

Now you know how important the test page is for further work. The main thing is to correctly print it and correctly eliminate the problems that have arisen.!

How to print an HP test page without a computer?

To get started, load regular, white paper of the correct size in the input tray.

A test print page for inkjet printers is printed as follows: turn off the device with the button, press the “Sheet” button without releasing it, press the “ON” button, release it, continue to hold the “Sheet” for about 10 seconds.

How to print a test page on an HP printer?

Each user, after purchasing a new technique, seeks to try it out as soon as possible. Of course, this also applies to printers. The only sure way to test the printing device is to print a durable page. This procedure will make sure that all the basic settings of the device have been set correctly, in addition it will be possible to make sure that the color is transmitted in full accordance with the desired result.

Test Print on an HP Printer

Left-click the Start button in the taskbar and select Control Panel from the list of services.

Move the mouse cursor over the selected printer and press the right key. The shortcut menu for the printer appears. From the context menu, select the command “properties and click on it with the left mouse button.

In the “Properties” menu, open the “General” tab and left-click on the “Test Print” command. If this is the first time the printer is starting up or it has not been used for a long time, you will need to wait a few seconds (15 to 30) before printing starts. It just takes the printer driver time to collect all the information about the system. In the future, the print processing speed will be higher. The test page parameters of any printer are defined by default and absolutely all printer parameters are tested during printing. Test page may vary from model to model.

When printing finishes, evaluate the test page. It should contain graphics, text, samples of absolutely all colors. There should be no distortion or unevenness. If the print was done using an inkjet printer, then there should be no ink drips.

READ  How to connect sony wh 1000xm3 to computer

When the printer finishes printing the page, you are prompted to save the print settings. If all the parameters of the test page suit you, you can simply click on the command “save print parameters by default.

What problems can arise?

But sometimes the following problem occurs: The test page was printed incorrectly. In this regard, the question arises of what to do in this case and how to still print this page? So, if the test print page is not printed correctly, then one of the possible problems is old or “broken drivers.

To solve it, you need to download and install their updated version. But what if this action did not help and the problem related to the fact that the printer does not print is still relevant? In this case, give “Everyone” full rights for “C: \ Windows \ System32 \ spool \ PRINTERS, and then delete the required printing device on the“ HKEY_USERS \.DEFAULT \ Printers.

In addition, give a regular user the rights that the administrator has and install a brand new driver under his name. After that, you can revoke the previously granted rights from him. You should also disable UAC. If the steps taken do not help, then you should run the Process Explorer utility and during printing, pay attention to what rights are missing.

What is a proof print and why is it needed

The probe is a printed A4 sheet containing various information about the printer, such as its name, model, ports, IP address, driver information, and others.

You can also print a test page to check the quality of text printing. In the event of defects, the owner of the peripheral device will be able to replace or clean individual parts to restore functionality.

Different test sheets can be used to check quality and detect defects.

Test page and trial. different concepts. In the first case, we are talking about a regular file that is printed like others from a computer. The test page is the system page of any device.

  • TF1. Used when diagnosing a color printer. The page shows images in different colors, which allows you to evaluate the accuracy of color reproduction. Also, the sheet contains a gradient fill with an intensity from 0 to 100%, so the user can objectively check the printing of shades.

After the printout, the specific fault can be identified.

  • Symmetrical dots. indicate damage to the photosensitive drum coating.
  • Vertical stripes. breakage of the magnetic roller. It is impossible to restore the part, a complete replacement is done.
  • Discontinuous streaks around the edges are a common sign of drum wear. Depending on the device, the proof sheet will contain dark spots, not streaks.

Printing on a computer

You can use built-in Windows tools or printer settings.

How to print a test page on a printer

On a laser printer

Most models have a button on the panel. It can be indicated by an icon of a sheet or other similar element. The system starts printing immediately after pressing it.

Sample print

Depending on the printer model, an additional tab may be added to its properties on the computer, for example, with maintenance functions. The list includes the possibility of special printing to check for clogged printhead nozzles and others.

Probe printed with defects

The most common causes of poor typing are:

  • problems with software (drivers);
  • paper jam in the tray or its complete absence, impossibility of picking up due to breakage;
  • there is little ink in the cartridge;
  • contamination of the cartridge;
  • hardware malfunctions that can be corrected only at the service center.

Through printer properties

  • Open “Start” and go to the “Control Panel” menu.
  • Next in “Devices and Printers” (or go directly through the WindowsR key combination and enter the control printers command).

In the tenth version of Windows, you can find the function through the “Settings” in the “Start” menu.

Why you need to print a test page

Such an operation of any device of this kind has several functions:

  • Confirmation of the fact of operation of the device;
  • Checking the print quality, the correct alignment of the color gamut, the absence of ink drips, distortions and irregularities;
  • Checking the basic settings and setting the required parameters.

IMPORTANT! After the test print, the system will ask whether to save the proposed print option. If you are satisfied with the brightness, saturation of the print, click “OK”, if not, go to “Settings”.

How to print a test page

This can be done in several ways. with the help of a computer and without its participation. To test the operation of the printer in the first way, follow this aLGorithm:

  • Click “Start” and in the taskbar on the right, select “Control Panel”;
  • Select “Printers”, in the pop-up window, right-click on the required device. Then, in the pop-up context menu, select the “Properties” section;
  • In the “General” section, click “Test Print”.

IMPORTANT! If you are using the printer for the first time or after a long break in work, you need to wait about 30 seconds. This time is needed in order to collect complete information about the operation of the system. The parameters of such a page do not need to be built, they are set by default.

You can check the quality and operation of the device without connecting to a PC. The first step is to load paper into the sheet feed tray. Then you need to press the power button and hold it in this position for 5-10 seconds.

On some models, this button has a piece of paper or the corresponding word written. Also, in models without a display, you must press the “Stop” button, the image on it looks like a triangle in a circle. For devices with a control screen, the following sequence of actions is suitable. “Installation”, “Maintenance”, “Check DYUZ”, “Start” and “Print”.

How to print a test page on a printer

After purchasing a new printer, it is very important to check that all elements of the working system are in working order. That’s what the test page is for. How to do it more correctly

What to do if the test page came out with defects?

There are several underlying reasons for this situation. First, you need to figure out the source of the problem. As a rule, when issuing a test page, two problems can arise: the device prints a sheet with an image and text of poor quality or does not print at all, does not respond to your commands. There are several solutions to such situations:

  • The problem may be due to the presence of outdated drivers. To restore printer functionality, you must download and install an updated version of the software components. If the work is not restored and you need to expand the rights, do it. disable UAC. Utilities such as Process Explorer and Procmon from Sysinternals will act as assistants.
  • Test page failure can occur due to technical reasons, such as paper out of the sheet feed tray, paper jam, or a cartridge that is not installed correctly in the slot. You can find out if a similar problem has arisen by using the indication (a red light on the device will be on) or by connecting the device to a computer and reading the driver data.
  • The problem can also occur in the device itself. Use the stop test to study printing. To do this, during the printing process, you need to disconnect the printer from the mains and look at the sheet, part of which is still in the device. So you will determine if there is a problem in the component parts of the unit.

IMPORTANT! Practice shows that any problem of this type can be solved independently by adhering to the above instructions.

If the appearance of the test page does not return to normal, contact your office equipment repair company. Do not try to disassemble the device yourself, present it to a professional!

Now you know how important the test page is for further work. The main thing is to correctly print it and correctly eliminate the problems that have arisen.!

Basic Rules

For modern users, it is very important not only to find the required information: diagrams, notes, illustrations, articles on the Internet, but also to print the content on paper in order to be able to continue working. Printing the content of a blog, site is slightly different from copying, because in this case you often have to edit the material transferred to a text editor.

To avoid various edits in the document, when the picture often goes out to the edges, and the text is displayed incorrectly or with underlays, encodings, it is necessary to use printing. Another reason that pushes users to refuse copying is the inability to perform such an operation.

Quite often, site pages are protected from copying, so you have to look for an alternative method to solve the problem.

To print a page from the Internet on a printer, the first step is to:

This is a quick checklist of how to prepare to print content from an international web.

How to print a page from the Internet on a printer?

With the development of modern technology, it has become possible to customize the operation of the printer for virtually any task. Using a peripheral device, you can easily print to paper the contents of a file located on a computer, smartphone, tablet, as well as print an interesting web page directly from the Internet.

The ways

It should be emphasized that there are no big differences when printing illustrations, text pages from the Internet in the process of using different browsers. For such purposes, you can select the default browser, for example, Google Chrome. The aLGorithm of actions comes down to simple rules, when the user needs to select the text he likes or part of it with the left mouse button, and then click the ctrlp key combination. Here you can view the print version and, if necessary, change the parameters. the number of copies, the removal of unnecessary elements and use additional settings.

READ  How to make a scan on a Samsung printer

Another equally simple way is to open the menu with the right mouse button on the selected page on the Internet and select “Print”. The same can be done through the browser’s working interface. The entrance to the control panel for each browser is in different places, for example, in Google Chrome, it is located at the top right and looks like several vertical dots. If you activate this option with the left mouse button, a custom menu will appear, where you need to click on “Print”.

There is another method to print a picture, article or drawings. In essence, it is copying material with subsequent printing. To use this method, you need to select useful information on the site page with the left mouse button, press the ctrlc key combination, open a word processor and insert ctrlv into a blank sheet. Then turn on the printer, and in the text editor on the “File / Print” tab select “Print file information on paper”. In the settings, you can increase the font, sheet orientation, etc.

Often on the pages of many sites you can find a very useful link “Print version”. If you activate it, the appearance of the page will change. In most cases, only text remains, and all sorts of images will disappear. Now the user will need to set the “Print” command. This method has a key advantage. the selected page is optimized for output to the printer and will be displayed on the sheet, in the word processor correctly.

To print a document, text or fairy tale from the Internet, you can use another simple way. This requires:

  • open a browser;
  • find an interesting page;
  • allocate the required amount of information;
  • go to the settings of the printing device;
  • set in the parameters “Print selection”;
  • start the process and wait for the print to complete.

To print the content of pages directly from the Google Chrome browser, you need to open the menu. at the top right, left-click on several vertical dots and select “Print”. The preview mode of the sheet that will be printed is activated.

In the interface menu, you can set the number of copies, change the layout. instead of the “Portrait” parameter, select “Landscape”. If you wish, you can put a checkmark in front of the item. “Simplify the page” to remove unnecessary elements and save on paper. If you need high quality print, you should open “Advanced settings” and in the “Quality” section set the value to 600 dpi. Now the last step is to print the document.

To print pages using other popular browsers. Mozilla Firefox, Opera, in the Yandex browser, it is advisable to first find the context menu to call the required parameter. For example, to open the main interface in Opera, you need to left-click on the red icon O located at the top left and then select “Page / Print”.

In Yandex browser, you can also activate the required mode through the browser interface. At the top right, left-click on the characteristic horizontal stripes, select “Advanced” and then “Print”. Here, the user also has the opportunity to preview the material. Next, configure the parameters as described above and start printing.

If you need to quickly activate the required mode of outputting information to the printer, in each open browser, you can use the ctrlp keyboard shortcut.

However, there are situations when you cannot print a poem or a picture, because the author of the site has protected his content from copying. In this case, you can take a screenshot and paste the content into a text editor, and then use a printer to print the document onto paper.

It makes sense to talk about another very interesting, but not the most popular way of printing the content of pages. printing with the connection of the resources of the foreign, but free online service Printwhatyoulike. com. The interface, unfortunately, is in English, however, working with the context menu is intuitive and will not cause any difficulties for users.

To print a page, you must:

  • enter the site address into the browser search bar;
  • open an online resource window;
  • copy the link into a free field;
  • pass protection from bots;
  • click on Start.

We must pay tribute to the resource. Here you can set the printing of the entire page or any part of it, because the user has a small settings menu located at the top left side.

If you need to quickly type any text from the Internet, it is advisable to use the combination of the above keys. In other examples, it makes sense to carefully adjust the print settings to get a high quality document.

If you can’t print the content, you can try taking a screenshot and pasting it into a text editor, and then printing it. It is very easy to print the required page from the Internet. Even an inexperienced user can cope with the task.

You only need to follow the recommendations and carefully follow the sequence of actions.

For more information on how to print a page from the Internet, see the video below.

Hot key combination

If you print pages from the Internet almost every day, then it will not be difficult for you to remember special hot keys that activate this process faster than through the browser menu.

  • First you need to open the page that you want to print. It can contain both textual data and graphic.
  • Then we press the combination of hot keys “CtrlP”. You need to do this at the same time.
  • Immediately after that, a special menu of settings opens, which must be changed to achieve the highest quality result.
  • Here you can also see how the finished printed pages will look and their number. If any of this does not suit you, then you can try to fix it in the settings.
  • It remains only to press the “Print” button.
  • This method does not take much time, but not every user will be able to remember the key combination, which makes it a little difficult.

    How to print a page from the Internet on a printer

    The exchange of information in the modern world is almost always carried out in the electronic space. There are essential books, tutorials, news and more. However, there are times when, for example, a text file from the Internet needs to be transferred to a regular sheet of paper. What to do in this case? Print text directly from the browser.

    Printing a page from the Internet on a printer

    You need to print text directly from the browser in cases where it cannot be copied into a document on a computer. Or there is simply no time for this, since you also have to deal with editing. It should be noted right away that all the analyzed methods are relevant for the Opera browser, but they work with most other web browsers.

    Quick access menu

    In order not to use hot keys, it is necessary to consider a method that is much easier for users to remember. And it is associated with the functions of the quick access menu.

    • At the very beginning, you need to open the tab with the page you want to print.
    • Next, we find the “Menu” button, which, as a rule, is located in the upper corner of the window, and click on it.

    A drop-down menu appears where you need to move the cursor to the “Page”, and then click on “Print”.

  • Further, only the settings remain, the importance of the analysis of which is described in the first method. It also opens a preview.
  • The final stage will be pressing the “Print” button.
  • In other browsers, Print will be a separate menu item (Firefox) or located under Advanced (Chrome). This concludes the analysis of the method.

    Context menu

    The easiest way that is available in every browser is the context menu. Its essence is that you can print a page in just 3 clicks.

    • Opening the page you want to print.
    • Next, click on it with the right mouse button in an arbitrary place. The main thing is to do this not on the text and not on the graphic image.
    • In the drop-down menu, select the item “Print”.
  • We make the necessary settings, described in detail in the first method.
  • Click “Print”.
  • This option is faster than others and at the same time does not lose functional abilities.

    Thus, we have considered 3 ways to print a page from a browser using a printer.