How to properly set up your LG TV screen

ways to clean your TV screen

During operation, TV screens become covered with dust, fingerprints and other types of dirt appear. This degrades the quality of the image, the color contrast is lost. Timely and correctly take care of the equipment.

properly, your, screen

5 popular methods for effective cleaning:

  • cleaning wet wipes. suitable for cleaning the surfaces of LED TVs and plasma panels. Eliminate static electricity. Do not have abrasive substances that cause damage to equipment;
  • a set of dry and wet wipes is the best option for two-level cleaning of LSD TV screens and plasma panels. Designed to remove residual moisture, has an antiseptic effect;
  • microfiber wipes. removes dust, streaks and grease from flat surfaces without the use of additional chemicals. In case of complex dirt, the napkin is moistened with plain water;
  • a set of spray and microfiber cloths. they clean all types of screens. This is the best cleaning agent option for high-quality maintenance of equipment. The spray does not contain alcohol and allergens. During the cleaning process, the surface of the screen is covered with a protective layer, due to the content of antistatic agent in the spray, which reduces the appearance of static charge;
  • aerosols, gels, foams and special dry wipes. clean the soiled TV screen by using lint-free wipes with a preliminary application of cleaning liquid.

All of the above methods are used to remove dirt from any type of monitors, laptops and tablet computers.

How to clean your TV screen?

Disconnect the appliance from the network, protecting yourself from unforeseen circumstances. On a dark screen, dirt and the result of work after cleaning are better visible:

  • dry the screen by removing dust with a soft, lint-free cloth;
  • do not press hard on the screen, as the soft and flexible LCD is susceptible to damage;
  • do not spray liquid on the screen;
  • apply liquid to the wiping material, then wipe;
  • use a damp but not wet microfiber cloth;
  • use cotton swabs to clean the joints of the screen and the case;
  • use clean napkins for each cleaning;
  • do not turn on the TV until the screen is dry.

How to clean your TV screen?

Among the cleaning materials, there are varieties of special products that take good care of the LCD TV screen.

What can not be used to clean the TV screen

Be careful with your choice of cleaning agents and materials. Do not wipe the LCD TV screen:

  • alcohol-based cleaning agents and materials;
  • do not use powders, window cleaners, acetone, soda and other household substances;
  • materials with a paper structure (toilet paper, paper towels, etc.);
  • sanitary wet wipes.

We invite you to the catalog, where you can choose a TV model to your liking.

Watch the video review of LG Oled TV

Test pictures for each parameter

Used to fit a single parameter. After setting this parameter, you will need to switch to another picture and adjust another parameter.

How to display test pictures on TV?

To display test pictures on the screen, use a USB drive (after having recorded files from the archive on it), if your TV is equipped with a USB input, if there is no USB input, output an image from your PC / laptop.

Is it difficult to set up TV correctly? I need the help of a master?

Achieving the correct display of the picture is no more difficult than configuring the channels. It will take no more than 20 minutes of your time. In order for your TV to be pleasing to the eye, you only need to adjust the picture settings so that the test pictures are displayed correctly on the screen. How exactly it should be “right” you will see below. Test pictures were selected by experts so that after adjustment you can enjoy any scene in terms of brightness, color, clarity and contrast.

Color setting

Color saturation and color temperature adjustments are made based on human skin tone. In order to get the correct color settings, you need a test picture with women depicted on it. They have different skin colors, adjust the controls so that the skin looks natural. To do this, use the remote control keys to move the color parameter slider in the menu until all faces look natural.

Test pictures with multiple test zones

They are used when you need to set up quickly or when the setting is performed by an inexperienced user. On such images, you can configure five basic parameters at once.

How to get the best picture on your TV?

Regardless of the screen size, every owner of a liquid crystal (LCD, LED) TV wants to get the maximum quality from the image displayed by the screen. In order to get closer to the benchmarks of format, brightness, contrast, color and focus, we will use various expert tests from Burosch.

The tests they have created are used all over the world in order to assess the quality of the image displayed by the TV screen. These tests and setup instructions are only suitable for liquid crystal (LED, LCD) TVs, not older than 10 years.

How to set up your TV

Typically, large TV manufacturers have their own laboratories to assess picture quality. The laboratories carry out comprehensive testing of televisions in various conditions. Surely in the box, in addition to the TV and a technical passport with detailed characteristics of the selected model, you will find an instruction manual.

If you flip through it, you will find the section “Ideal Picture Settings” or “Recommended Settings”. There you will find the best settings for viewing, selected by testers in the laboratory.

Ideal settings may not provide the best picture quality for you. Use the received data as a starting point, take into account personal preferences and desires.

Make sure the lighting conditions in the room match up with normal viewing conditions. Then press the Menu button on the remote control or the Options button to open the OSD menu and find the Picture Options section.

Most TVs have default picture settings saved, so if you end up making a lot of changes and then decide to start from scratch you can load them.

First of all, turn off any minor image enhancements like noise reduction, autoflesh, autocolour and others. Most of them do very little to improve the picture, and sometimes lead to adverse side effects.

Only after you have changed the basic parameters, you can try the image enhancements in the Settings separately for calibration and fine-tuning. For example, noise reduction can help improve a very poor signal or an old, grainy recording.

The owner’s manual probably says that brightness settings are used to control brightness, image intensity, or something similar. The truth is that brightness is used to set the black level of an image.

Most TVs and projectors in use today have the brightness set too high. This is because people think that a bright picture is good, so it is worth setting a high level. Well, that’s good in theory and totally wrong in practice. Adjusting brightness too high makes blacks gray, reduces overall snap and image clarity.

READ  LG TV no picture sound works

There are two ways to find the correct settings for brightness.

The first is to adjust the brightness by eye. Find an image in the movie that has textured black and some shadows, and stop the movie at that frame. As the brightness decreases, the black intensity will increase and the shadow will appear darker.

Optimal settings for brightness are achieved when true black objects appear black. Above this value, black will appear more gray. Below this value, you lose shadow detail. Find the brightness level that’s right for you.

The second method is more accurate and consists of using a special image. It is necessary to decrease the brightness level until the left bar matches the background.

You can get confused with the contrast of your TV too. Contrast levels are also often set too high. Contrast sets the ratio of the brightest white tone to black. In fact, the contrast setting is used to control the intensity of the highlights in a picture.

To adjust, find a test scene that has bright white details and freeze that frame. Let’s say you have a white glacier in sunlight. If you start with low contrast, the glacier will be light gray rather than white. As the contrast increases, the glacier will become whiter and whiter. There will come a moment when the image starts to lose detail. This means that the optimal point has been passed.

Find the point at which a white image looks white, retains structure and detail. These are the optimal contrast settings.

Important! Note the following: brightness and contrast can be interactive to some extent. Your new contrast settings will probably affect brightness. So check the brightness setting, if necessary, repeat the brightness and contrast adjustments. This is an additional hassle, but imagine what quality image you will receive.

The color control on your set determines the level of color intensity in the image. One of the most common mistakes people make when setting up their TV is oversaturation. As a rule, they think: “I want to get as many colors as possible, set the intensity level higher!”

If you reduce the color level to zero you will notice that the image has turned to black and white. Optimal color settings are achieved by increasing the intensity to a value that makes colors appear natural. The tones should look natural and without any hint of unnatural sheen. The grass should look natural and not have a toxic green color.

When adjusting color, make sure your test image has relatively desaturated colors. Natural landscapes are the perfect choice. Cannot set the color correctly if you are using a bright red Ferrari as the test image.

Hue controls color balance, not color intensity. If the skin tones appear to be either too green or magenta, the hue level is not set correctly.

Find a picture of a person. Increasing the tint level turns the skin green, decreasing the skin turns purple (red blue).

The correct hue level is near the middle of the scale. This is the most neutral point between the two extremes. Flesh tone looks most natural at this point.

Sharpness sets the visibility of details in the image, adds processed information to the image that is not part of the original video signal. It adds artificially defined edges and makes the image look less natural than it really is.

On most TVs, the optimum sharpness setting is zero. On many digital projectors, the optimum setting is either low or mid-scale.

By lowering the sharpness level, you will see a smoother, more natural image. It can take a while to get used to as you are used to watching videos with all the artificial enhancements that give the illusion of added sharpness.

However, this removes artifacts and noise from artificial sharpness. You will be amazed at how smooth, natural, and satisfying an image can actually be.

This important control affects the entire color palette. Choose a warm or low option that is close to the 6500 Kelvin standard.

We’ve covered setting up the most basic parameters that will make the image unique. You just need to find where exactly is the setting of this or that parameter on your TV. It shouldn’t be too difficult. Experiment and enjoy the great image you have customized.

How to sharpen your TV?

If you think that with sharpening you will get more detail in your television images, then you are likely to be disappointed. Outside of the sharpness setting, all modes will invariably be set too high. Look at black text on a light background: does it have a white glow or a ring around it?

This additional Accent improves readability when viewed from a distance, but does not improve detail, it actually hides it. And on a 4K TV that is meant to be viewed more / closer, to appreciate the improved detail it is best not to. Sharpness should be no higher than 10/15 on the adjustable sensor.

Typically standard defaults are offered with overscanning On. This means that the edges of the image are actually lost outside the frame.

This rarely happens in the HD era, as real picture information is used throughout the 1920 × 1080 HD frame. Non-Overscan modes may have different menu names depending on the brand. Look for aspect ratio adjustments and watch out for what makes the image “recede” and reveal a little more.

How to connect a TV screen?

Source components and Blu-ray players usually have different display options, but usually manage themselves based on the display they are collaborating with, thanks to the Extended display identification data (EDID) information they encounter. You can manually intervene.

The best way to test this is to go into the display settings of your Blu-ray player or game console to set exactly what they output. Ideally, you’re looking for them for 4K output, but many Full HD boxes won’t be able to do that.

If you watch 4K content on the internet, it also usually just downsamples to what your TV can output.

If you are a little confused as to what your TV can support, then we would suggest picking the highest available option and just see what happens.

Most sources will briefly show an image to test if your TV can support your chosen settings. And if this image is not displayed, then you can safely assume that your device cannot support it.

Just scroll through the settings until you find the highest option your TV can display.

To complicate matters further, some of the cheaper 4K TVs will only support 4K on a portion of their shared HDMI ports (usually the first two). If your new 4K Blu-ray player cannot display Ultra HD on the screen, try using a different HDMI port to resolve the issue.

How to tune your TV screen?

Now there are no general rules for installing a TV. Everyone has their own house, room layout, technology and different preferences. Not to mention all the smaller factors like lighting, wall placement and how it will fit into your setting.

Plus, it seems like every week a brand new 4K TV or high-tech feature announcement shakes up the home theater market meaning there is always something else to consider buying a picture-perfect TV in the future, but before that you have to set it up properly. your TV screen.

Adjusting the TV screen

The good news is that as more TV display advancements such as 4K Ultra HD resolution, HDR and wide color gamut continue to hit the market. This means that the picture quality you can get these days with even a budget TV can be very decent.

The good news is that tweaking your screen isn’t difficult, and you really can’t go wrong. Even if you get caught in a multicolor motion blur. You have an easy opportunity to fix it, for which. just go back to factory settings.

How to adjust dimming on the TV screen?

The quest for deeper blacks has led to a number of image processing techniques that can reduce image quality rather than improve it. Black boost and stretch options can make dark parts of an image appear blacker, but crush much of the subtle shadow detail that makes dark areas compelling.

Dynamic Contrast modifies the level of glare by continually adjusting in response to changes in image content. This can lead to unnatural image swapping. If you notice that it works, try disabling it or minimizing it.

READ  Screen share LG how to connect phone

Few things affect overall viewing on an LED LCD TV more than local dimming. Both edge LED TVs (general) and direct backlit LED TVs (not many) use local dimming to adjust the brightness of different parts of the screen independently of each other according to picture requirements.

The technique can be a little rough, resulting in splashing puddles of light and clouding backlights, while bright highlights in a dark scene can illuminate screen stripes and cause distracting side effects.

Set local dimming to a minimum to minimize such hassles.

How light in a room affects the perception of images?

One of the important characteristics of LCD screens is that each one behaves differently depending on the level of ambient light in your room. Since LCD is backlit display technology, it becomes more and more torch-like in a darkened room.

What looked like a black image in a room with medium ambient light turns gray (whether dark gray or light gray) in a darkened room. Panel makers will try all the tricks from filters to highlighting tricks to hide this fact.

OLEDs or plasma screens are self-luminous displays and do not suffer from this torch-like trait. They even perform better in low-light rooms, making them a great choice for moviegoers.

How to adjust your TV settings for the best picture quality

Next time you go to the cinema, watch the black level performance. The middle projected image is also quite gray.

However, if you want to improve picture quality then consider placing a light source such as a lamp behind your TV.

What sources and connections should be on the TV

It may sound obvious, but in order to get the best out of your TV, you need to put the best in it.

It boils down to using high resolution sources. For watching movies and TV shows on disc, regular DVD players are the bare minimum, but if you love quality they should really be pushed out in favor of a decent Ultra HD Blu-ray player.

4K broadcast content is currently minimal, but the gaming world is taking 4K consoles like the Xbox One X and PlayStation 4 Pro by storm. There are also many 4K streaming devices nowadays such as Apple TV 4K.

However, if you really want to buy in 4K content, then you should consider one of the best TV streaming services that has a huge amount of 4K HDR content.

Of course, once you have a TV, it is very important that you use the correct connections. You’ve probably used Sky HD over a SCART connection at some point over the years.

By and large, the only connection you should be using currently is HDMI, unless there is an overriding reason for choosing an outdated interface. Owners of older Panasonic TVs can still have a DisplayPort connection that is used to connect to a PC and can deliver equally high quality signals.

Tips for setting TV screen modes

Heavy imaging is anathema for gamers, as even the slightest lag can lead to humiliating defeat at the hands of online rivals.

To address this, manufacturers now offer a dedicated low lag preset that maximizes performance.

They disable most of the processing. If your kit doesn’t have a preinstalled game, it’s probably worth manually turning off as much imaging as you can for your game input.

Those milliseconds of competitive advantage will undoubtedly help you the next time you launch a game.

If your TV supports it, try enabling Game Mode only for the HDMI port the console is connected to so that other content can benefit from the advanced image processing your TV offers.

How to properly adjust the picture on your LG TV

Many users wonder if they need to adjust the picture on their TV after purchase. LG equipment manufacturers, despite the large production volumes, perform debugging of all TV functions. But nevertheless, it is worth considering that factors and conditions in which your LG TV will be used play an equally important role. The signal source, the height at which it will be installed or hung, the distance from which you plan to watch TV, the size of the room, and even the level of light in the room. everything has a role to play. So you can customize the image “for yourself” only at home after installing and starting up your TV. It is easy to do it yourself, without calling the master at home.

As with any equipment, you should start adjusting the picture on your LG TV by reading the User’s Guide (instructions).

All current LG TVs run on Web OS, which makes operating options intuitive. The easiest way to customize your image. enable the “Intelligent Picture Mode” function. When this mode is active, the TV itself selects the best picture settings for each broadcast.

  • Press the Home button on the remote. Find in the menu the item “Settings” (Icon “Gear”), then in the upper right corner of the screen, select three points located in a row above each other.
  • Find in the opened list “Screen”, in it you will see the line “Intelligent image mode”.
  • Activate “Intelligent Picture Mode” with the “On” button.

Important: This option is not active in all regions.

If the Smart Mode function is not active in your country, you can manually adjust the picture on your LG TV.

  • Press the Home button on the remote. Find in the menu the item “Settings” (Icon “Gear”), then in the upper right corner of the screen, select three points located in a row above each other.
  • Find the line “Screen” in the menu that opens. Picture Mode Settings. “Screen mode”.
  • All you need to do is decide which mode you need depending on what kind of content and genre you are going to watch at the moment.

Picture adjustment modes for LG TVs

Standard: Adjust brightness, contrast and sharpness in standard mode.

Vivid: After you turn on this mode, the TV picture will be brighter, more contrasting and sharper by increasing these settings.

“Eco / APS” (depending on the model): When this mode is activated, the picture adjustments can save power consumption.

Cinema: A mode designed for watching movies and TV series.

Sports / Football / Cricket (Mode availability and name depending on model and country): Picture settings allow you to watch sports events in the best quality, including due to increased sharpness of objects moving at high speed.

Games: This mode is specially designed to connect LG TVs to game consoles. In particular, the image is displayed without delay.

Photo (Only supported by Ultra HD TVs): Optimized mode for viewing images with minimal loss of color.

ISFccc Expert: This mode is exclusively for ISF Certified Image Adjustment Professionals.

In this mode, you can adjust the image using test charts and samples.

What other picture options can you adjust on your LG TV?

In the “Image mode settings” section of the menu (how to open it, see above), you can also adjust other image parameters:

Backlight: The stronger the backlight, the brighter the screen image.

OLED Light: Adjust the brightness of the OLED panel backlight.

Contrast: Adjusts the contrast between light and dark parts of the image.

Brightness: Adjusts the brightness of the screen image.

Sharpness: Adjusts the sharpness of the picture.

  • Horizontal Clarity: Adjusts the clarity of the horizontal border,
  • Sharpness Vertical: Adjusts the sharpness of the vertical border.

Color: Adjusts the color intensity of the image.

Tint: Adjusts the RGB color balance. The closer to R50, the more pronounced the red tones. The closer to the G50, the richer the greens.

Color Temperature: Adjusts the color balance from cool to warm tones.

Also in the “Image settings” menu there is a sub-item “Additional settings” / “Additional settings. Settings “. A number of other parameters can be configured in it:

Dynamic Contrast: Corrects the difference between light and dark on the screen.

Dynamic Color: Corrects the saturation and brightness of colors on the screen.

“Color Corrector”: Optimal ratio of colors on the screen for the visual perception of the viewer.

“Preferred Color”: Correction of individual image settings depending on the individual wishes of the owner.

Super Resolution: Improves the clarity of a blurry picture.

Expand Boundaries: Increase the detail around the edges of the screen.

Sample: Setting Tables Used in Expert Mode.

“White balance”: Corrects images with warm or cool tones.

READ  Controlling your LG TV from your phone

To reset the selected image settings, you need to select the “Reset” item in the “Image mode settings” (how to open it, see above “).

On the newest models

The search for channels on LG smart TVs is carried out for a short time, so the owner only needs to make part-time settings and then start an automated process. Here it is important to choose the right type of the wanted programs: analog or digital. Sometimes it is easier to do this by specifying the frequency of broadcasting radio waves.

When setting up each channel, the user sees its parameters on the screen

For each individual program setting, you can select the mode of the incoming signal

Upon completion of the search process, the system will automatically number the programs, while paid and encrypted channels will be skipped.

Turning on your LG TV for the first time

After purchasing the device, you need to start it immediately after mounting it on a wall or a special shelf to make sure it is in the correct position. For these purposes, you must use the manual that comes with the equipment.

With geolocation enabled, it will be easier for the satellite to find equipment if the country of use is correctly indicated

There is no picture

This may be due to improper cable connection from the antenna or set-top box. It is important to check the plug, remove and reinsert it into the connector. If Internet channels are connected, it is recommended to press the corresponding button on the distribution device and on the TV (if available).

General screen settings and format may affect the quality of signal reception.

Make sure noise canceling is turned off on your LG TV

The wrong choice of the mode between the video inputs also causes the loss of the image. Press the corresponding button on the remote control and make sure that the setting is correct.

How to properly tune channels on your LG TV. step-by-step instruction

The brightness of the picture on the TV also depends on the correct initial settings.

What to do if you have problems setting up your LG TV

If difficulties arise, first of all, it is necessary to repeat the settings. Sometimes you have to call the master. Equipment may need to be repaired. During setup and operation, the following problems may occur.

Before adjusting, it is important to choose the right picture parameters.

Automatic tuning of digital and analogue channels

Each TV is equipped with an “Auto Search” function. Through it, it is easiest to perform all sorts of manipulations to install channels on Smart-TV. As a result, not only digital, but also analogue programs will be found, if there is a corresponding signal. This method is popular with those who are easily confused in the settings.

Auto search function saves the user from entering received signal data

All that needs to be done is to enter the main menu, then simply select the “Automatic program settings” item. After these operations, you need to wait a few minutes until the entire scale reaches 100%, after which you can assign an individual number to each found channel.

How to properly set up your LG TV screen

Before using the Magic Remote Control with your Smart TV for the first time, you must register it. To register Magic Remote using the Wheel (OK) button. do the following:

Wait 10 seconds for the Smart TV to turn on.

Point the Magic Remote at the TV screen and press the Wheel (OK) button. After registering the Magic Remote Control, a message appears on the TV screen.

If Magic Remote does not register, turn off your Smart TV, turn it on and repeat the registration process.

If the Magic Remote does not work properly, it should be initialized and re-registered. To use the Smart Home button and BACK button on the Magic Remote to register the Magic Remote. do the following:

Press and hold the Smart Home and BACK buttons on the Magic Remote for 5 seconds to initialize the Magic Remote.

Point the Magic Remote at the Smart TV screen, and press the Wheel (OK) button. After registering the Magic Remote Control, a message will appear on the screen.

Point the Magis Remote at the Smart TV screen and press the BACK button for 5 seconds to re-register the Magic Remote.

Smart Home Settings INSTALLATION Index

To customize the speed, shape and size of the Magic Remote pointer. do the following:

On the Magic Remote. press the Smart Home button. to open the Smart TV home screen.

Select SETTINGS Index. to open the pointer customization window.

LG TV Tips & Tricks 2020 edition, featuring nano86!

Speed: select the speed at which the pointer moves.

Equalize : toggles auto-align pointer on and off.

Equalize function moves the pointer to the center of the screen when shaking Magic Remote horizontally.

Correct TV picture setting

As a rule, all modern TVs have quite pleasant and convenient picture settings that most users never change at all. In most cases, the default settings are indeed optimal and provide quite acceptable image quality. However, there are situations when the factory settings do not allow you to fully enjoy the picture of a film, video or program. Then it becomes necessary to set your own parameters. But how to do that? In this article, we will figure out how to adjust the TV images. Let’s get started. Go!

Modern TVs have quite pleasant and convenient picture settings.

Let’s start with the picture modes that are found in every modern TV of any brand (LG, Samsung, Philips, Sony, and so on). There are at least three of them:

  • Standard;
  • Dynamic;
  • Movie.

In almost all models, the best picture is provided by the “Cinema” (or “Cinema”) mode. In this mode, gamma and brightness are most pleasing to the eye, especially when watching movies or broadcasts in the dark.

As for the correct color temperature, it is best to set the mode to “Warm”, since, as a rule, it is closer to the standard value of 6500 K. Some models provide several options for the same color mode, for example, in Samsung TVs: “Warm1” / “Warm2”. Here, choose which one you like best, but usually the second option is the most pleasing to the eye.

[LG WebOS TV]. How to Setup Your LG Smart TVs

If you are adjusting the picture settings of the TV yourself, we recommend that you turn off all the functions and modes of the automatic picture adjustment of the TV. These are parameters such as:

  • Dynamic contrast;
  • Energy saving;
  • Lighting sensor;
  • Dynamic backlight.

It is advisable to disable all this and not use it.

Now let’s deal with one of the key and most important image parameters, namely contrast. If the contrast is considered to be the ratio of the white field to the black level, then on TVs you will only adjust the brightness of the white field, in fact, this is the level of the maximum brightness of the picture. If you have a plasma panel, it is best to adjust the contrast with the lights off. Open an image with a white level window on the screen. You can download it from the internet. Then set the contrast value close to the maximum, and start gradually decreasing the contrast until the picture with the white level is the most pleasing to the eye.

Samsung TVs have an item “cell brightness”. it is he who most of all affects the overall brightness.

If you have a liquid crystal or LED screen, then everything is done the same way, only here a different parameter is used. “backlight brightness” or “backlight contrast”. This difference in names is due to the excellent device of LCD and LED TVs from plasma panels.

Please note that if the image is too bright, your eyes will fatigue much faster.

While Contrast adjusts the white level, Brightness adjusts the black level. To properly adjust the brightness level, you need a Plugepattern picture. Download it and open it on your screen.