How to Put a Cartridge Into an HP Printer

How to insert a cartridge into a printer of different brands

For those who have performed this procedure before, it is familiar and simple. But if you need to change the cartridge for the first time, then a lot of questions may arise. But don’t panic. Pull yourself together and calm down. The task is simple and anyone can do it. After performing it several times, feel like a professional, who solves this problem quickly and efficiently.

Where to begin?

In this case, it is worth considering the type of printer. There are monochrome and color laser. The process of replacing the cartridge is different for them.

After the features of the device have been determined, it is necessary to properly prepare the workplace. Since the procedure is rather dirty, it is necessary to cover the table. You can use paper for this. Then you need to remove the old block. Then carefully dip it into the bag and close it tightly. This can get your hands dirty. If so, shake them off and immediately rinse with cold water.

How to Insert a Cartridge into an HP Printer: Removing the Old Block

Each printer model has its own characteristics. If we are talking about the manufacturer HP, then this device is one-piece. It is a monoblock, in which the parts of the units are in a sealed case.

To insert the cartridge into the HP printer, you must turn off the power supply. Then open the door. To do this, the button responsible for resetting the fixation is pressed, and the cover must be pulled towards you. After that, you will see the cartridge, which will independently move to the center. This process is automatic. Removing it from the structure is easy. It is enough to pull on yourself with your hand.

If it was not possible to get the old block in this way, then it is necessary to unlock it. It consists in the fact that the latch is pressed inward. After that, the stop mechanism opens and the blue button is clamped. She is responsible for resetting the commit. You can find it on the side of the carriage.

How to insert a cartridge into an HP printer: process features

After the old block is removed, you can proceed to the process of inserting a new one. The cartridge is in the box. You need to open it and get the contents. But it is better to do this just before installation is performed, as exposure to air will adversely affect the device.

Shake the new block lightly. This procedure is required. Since it could be stored for a long time. This leads to the fact that the fine powder, which is inside the block, cakes. Hold it horizontally and shake it 3-4 times.

The print head is covered with a film. It’s on the bottom of the part. It is necessary to remove it carefully and carefully. In order not to get your hands dirty, grasp the colored label on the film.

The block must be placed in the place where the old cartridge was previously. Commit it. To do this, use a thrust mechanism or latch. The click is guaranteed to ensure that the block is in place. In this process, you should not press hard and make sudden movements. This will damage parts. The cartridge should slide smoothly over the stripes.

Notice where the old block was located. Insert a new one in the same way. It is strictly forbidden to install it upside down. After making sure you have followed the entire procedure correctly, close the printer door. Print this page if done correctly, but it will be of high quality.

HP Deskjet: model features

HP offers a wide range of printers. They differ in quality, functions and other characteristics. It is important to consider this when doing any work with them.

To insert the cartridges correctly into the HP Deskjet printer, you will need to read the instructions for the device. It describes the process of replacing the cartridge in detail and is accessible.

Canon color printer: insert the cartridge

The color printer has a number of design features. So, a black-and-white device works with the introduction of a photo drum, a container for black powder. If we are talking about color printing, then one tone is not enough, several are required. For example, yellow, red, blue and others. They are in sealed containers installed separately. Their location depends on the model of the device, as shown in the photo below.

This installation must be done correctly. This is helped by the indicator stickers, which are on each block. The same should be found in the installation slot. In summary Positioning the cartridge correctly will be difficult.

It is important to note that not all units are replaced. They are spent in different ways. You can find out that the cartridge needs to be replaced by the indicator. Once the paint is over, it will automatically fire and start flashing.

READ  How To Connect iPhone To Printer

This replacement procedure consists of the following work. First, open the door. After that, one container will appear in front of your eyes. To find the rest, you need to click a specific button. If there is no result immediately, then hold it for a few seconds. The rest of the replacement measures are similar to what were described earlier.

There is one point that is important to know. Only one block can be replaced. If it is necessary to replace several, then the procedure is repeated anew from beginning to end. At the same time, it is worth checking each one for the quality of work. This will allow you to fix problems as soon as they arise. Thus, save time and effort.

An excellent assistant in this process is the cartridge installation video. As practice shows, it is better to see once than read several times. It is listed below and contains a lot of useful information that will certainly be useful to you.

How to insert a color cartridge into an HP printer

The ink cartridges in most HP printer models are removable and even sold separately. Almost every owner of printing equipment is faced with a situation when it is required to insert a cartridge into it. Inexperienced users often have questions related to this process. Today we will try to tell you as much as possible about this procedure.

Insert the cartridge into the HP printer

The very task of installing the ink tank is NOT a problem, however, due to the different structure of HP products, certain difficulties may arise. We will take the DeskJet series model as an example, and you, Based on the design features of your device, repeat the instructions below.

Setting paper

In their official guides, the manufacturer recommends refilling the paper first, and then proceeds to install the ink tank. This allows you to immediately align the cartridges and start printing. Let’s take a quick look at how this is done:

  • Open the top cover.

Do the same with the output tray.

Slide the top mount to match the paper width.

Secure it with the width guide, but not tightly so that the pickup roller can freely pick up the paper.

This completes the paper loading procedure, you can insert the container and calibrate it.

Mounting the ink tank

If you are going to purchase a new cartridge, be sure to make sure that its format is supported by your equipment. The list of compatible models is in the instructions for the printer or on its Official page on the HP website. If the contacts do not match, the ink tank will not be detected. Now that you have a suitable accessory, follow these steps:

  • Open the side panel to Access the holder.

Press down gently on the old cartridge to remove it.

Unpack the new component.

Remove the protective film from the nozzle and contacts.

Put the ink tank back in place. You will know that this happened when the corresponding click appears.

Repeat these steps for all other cartridges, if necessary, and then close the side panel.

This completes the installation of the components. It remains only to calibrate, after which you can proceed to printing documents.

Aligning the cartridges

Upon completion of the installation of new ink tanks, the equipment does NOT immediately recognize them, sometimes it cannot even determine the correct color, so it is necessary to align. This is done through a built-in software function:

    Connect your device to your computer and turn it on.

Go to “Control Panel” via the “Start” menu.

Open the “Devices and Printers” category.

Right click on your printer and select “Printing Preferences”.

In case your device is NOT displayed in the list, you should add it yourself. This can be done in different ways. Learn more about them in our other article at the link below.

In the window that opens, find the “Services” tab.

Select the Align Cartridge Maintenance Tool.

Follow the instructions shown in the Alignment Wizard. After finishing, you just need to reconnect the printer and you can go to work.

Even an inexperienced user can handle the procedure of installing a cartridge into a printer, and not one with additional knowledge or skills. Above, you were familiar with a detailed guide on this topic. We hope our article helped you to easily complete your task.

Thank the author, share the article on social networks.

The ink cartridges in most HP printer models are removable and even sold separately. Almost every owner of printing equipment is faced with a situation when it is required to insert a cartridge into it. Inexperienced users often have questions related to this process. Today we will try to tell you as much as possible about this procedure.

Insert the cartridge into the HP printer

The very task of installing the ink tank is NOT a problem, however, due to the different structure of HP products, certain difficulties may arise. We will take the DeskJet series model as an example, and you, Based on the design features of your device, repeat the instructions below.

Setting paper

In their official guides, the manufacturer recommends refilling the paper first, and then proceeds to install the ink tank. This allows you to immediately align the cartridges and start printing. Let’s take a quick look at how this is done:

  • Open the top cover.

Do the same with the output tray.

Slide the top mount to match the paper width.

Secure it with the width guide, but not tightly so that the pickup roller can freely pick up the paper.

This completes the paper loading procedure, you can insert the container and calibrate it.

READ  How to find the password for the HP printer

Mounting the ink tank

If you are going to purchase a new cartridge, be sure to make sure that its format is supported by your equipment. The list of compatible models is in the instructions for the printer or on its Official page on the HP website. If the contacts do not match, the ink tank will not be detected. Now that you have a suitable accessory, follow these steps:

  • Open the side panel to Access the holder.

Press down gently on the old cartridge to remove it.

Unpack the new component.

Remove the protective film from the nozzle and contacts.

Put the ink tank back in place. You will know that this happened when the corresponding click appears.

Repeat these steps for all other cartridges, if necessary, and then close the side panel.

This completes the installation of the components. It remains only to calibrate, after which you can proceed to printing documents.

Aligning the cartridges

Upon completion of the installation of new ink tanks, the equipment does NOT immediately recognize them, sometimes it cannot even determine the correct color, so it is necessary to align. This is done through a built-in software function:

    Connect your device to your computer and turn it on.

Go to “Control Panel” via the “Start” menu.

Open the “Devices and Printers” category.

Right click on your printer and select “Printing Preferences”.

In case your device is NOT displayed in the list, you should add it yourself. This can be done in different ways. Learn more about them in our other article at the link below.

In the window that opens, find the “Services” tab.

Select the Align Cartridge Maintenance Tool.

Follow the instructions shown in the Alignment Wizard. After finishing, you just need to reconnect the printer and you can go to work.

Even an inexperienced user can handle the procedure of installing a cartridge into a printer, and not one with additional knowledge or skills. Above, you were familiar with a detailed guide on this topic. We hope our article helped you to easily complete your task.

Thank the author, share the article on social networks.

Installing a cartridge after refueling or buying a new one is a procedure that many users have to do on their own. This is NOT a difficult action at all, even a beginner can handle it. But inexperienced users raise a number of questions about this. Let’s consider how to correctly change the cartridge in an inkjet or laser printing device.

Step-by-step instructions on how to insert the cartridge into the device

There are two situations: change or refill print cartridges. One way or another, you will need to get them out of the printer and then put them back in place. Consider this for several types of printing equipment.

What you need to refill the cartridge

In order to fill the empty cartridge, you need to prepare:

  • Cotton swabs;
  • Latex gloves;
  • Cloth napkin;
  • Refueling kit: syringe, ink.

We act in the following stages.

  • Open the hinged cover and carefully remove the empty cartridge according to the instructions for the printer.
  • Find the filling hole and insert the syringe needle there, which will respond with a light touch to the sponges located inside.
  • At a slow pace at intervals, allowing the sponges to soak, refill the cartridge with ink.
  • When paint appears in the drainage holes, the syringe can be removed.

The holes are wiped with a cloth napkin. Place the cartridge on a flat surface (table) for about 5 minutes to settle.

How to install a filled container

You need to carefully take a full tank and place it where it was previously. Install in a click. The next step is to turn on a “cleaning cycle”. getting good print quality. Then the equipment can be considered ready for operation. This way you can refill the cartridge yourself, saving time and money on going to the workshop.

Reinstallation specificity for different types of devices

Now many have a printer, having turned into a household device. over, the printing equipment is capable of working on a wide variety of surfaces. The most common designs are inkjet printers. The reasons are the relatively low cost, the ability to print on various types of paper. Consider how cartridges are installed in laser and inkjet printing devices from various manufacturers.

Laser printer.

The reinstallation technology in a laser printer is as follows.

  • For free access to the internal parts, the equipment must be online. Some models require pressing and holding the Reset button. Then you need to pull the cover towards you. Secondly, it should simply be opened. In this case, the cartridge moves out to the middle.
  • Open the retaining mechanism to remove the reservoir. For this, the stop latch is pressed inward. And in some models they press “Reset”.
  • After unlocking the system, you can remove the cartridge by pulling it towards you and up. They shake it, changing it to a new one, so that the ink is distributed. After all, they often become stale, which can degrade print quality.
  • We unpack the cartridge, remove the protective sticker. The print head located at the bottom must not be touched by hand.
  • We make the installation, we provide a reliable fixation in the right place. Mindfulness will exclude turning backwards and upside down. The cartridge should slide easily along the guides. If this is not the case, reinstall it again. After clicking firmly, you can cover the fillings with a lid.
  • Trying to print. Usually the computer asks for permission to check. we agree (ok).

Inkjet and laser printers recharge in principle the same. The only difference is in the form of tanks and filler: ink, powder.

READ  The computer does not see the printer what to do HP

HP, Canon, Samsung.

How do I insert an ink bottle into an HP printer? The products of this brand are diverse, in connection with which discrepancies in the instructions may arise. You can turn to an example. the DeskJet series, on the basis of which the steps will be repeated.

First of all, install the paper (which is recommended by the guide). This requires:

  • Open the cover, trays: for paper and receiving;
  • Push back the top mount, which is responsible for the width of the sheets;
  • Some A4 paper is loaded into the tray;
  • Securing the stack of effortless width guide.

Installation of the cartridge. It must match the hardware, or the device will not detect it. We perform the following actions:

  • Open the side panel (cover) where the holder is located;
  • Press on the old inkwell, remove it, unpack the new one;
  • Remove the protective film from the contacts and nozzle;
  • Install the cartridge in place after hearing the click;
  • Reinstall the rest of the ink tanks in the same way, if necessary;
  • Close the side cover.

The final step is calibration and printing. Cartridges Must be recognized by the hardware. To do this, we align the heads using the program:

  • Connect the printing unit to the computer, turn it on (control panel. start menu. Devices and Printers. HP Printing Preferences)
  • If equipment is NOT displayed, add it to the list;
  • Find the “Services” tab;
  • Select the “Align Ink Cartridges” tool, will start the process following the instructions.

It remains only to reconnect the printer so that it can print.

Let’s move on to the Canon brand and look at the installation of an ink tank in this device. The principle is almost the same in all models, the containers are in the FINE format. Having purchased a new filled tank, we perform the following steps.

  • Removing the container. Turn on the power, start the printer. Then open the cover and paper tray, and then the cartridges will move to replace. Click on the holder, lowering it down to click. We get the capacity.
  • Install the new ink tank immediately after unpacking it DO NOT shake it. Placing all the way into the back wall. Raise the locking lever to click.
  • We close the lid of the tray. This moves the cartridge so that you can print.
  • If you need one color, indicate it through the program. The path is as follows: Control Panel. “Start”. Devices and Printers. Canon. RMB. Printing Preferences. “Maintenance” (tab). “Cartridge Settings”. Next, select the inkwell and click “OK”.

Now reload and start typing.

Let’s see how the Samsung toner cartridge changes. The program reports on the need for this procedure. It is necessary to purchase an ink bottle corresponding to the model, shake it. Do not leave the container in the light, but hold it by the handle, and not touching the working parts. We proceed to the replacement in the following steps.

  • Open the lid, take out the old container.
  • We release the new tank from the packaging, remove the protective tape.
  • Shake up to 6 times to distribute the toner inside.
  • We hold the inkwell by the handle, slowly insert, aligning the protrusions with the grooves of the printer. Clicking indicates correct location.
  • Close the lid securely.

Brother

The toner cartridge in the Brother printer is separated from the drum unit. To replace the container, you need to purchase an original (from the dealer) cassette that matches the model of the printing equipment. The device reports the need to replace, the Toner indicator lights up. Open the cover, take out the drum unit and toner cartridge assembly. The first one is pulled towards themselves, after which they are raised. Pressed on the blue release lever, the reservoir is removed for subsequent disposal. Everything seized is placed on paper.

The insert is made in stages:

  • Unpack a new cartridge, keep away from light. It also needs to be shaken to distribute content.
  • Place the container in the drum unit, not touching the gray areas. Fixation will occur with a click. If everything is correct, the locking lever will rise.
  • The blue slider needs a feat to clear the inner wire of the drum unit.
  • Before installing the drum in the device, put the blue slider in place.
  • At the end close the front cover.

Now it remains to check the operation of the printing equipment.

Useful Tips

  • You can find out about the need for replacement by the messages of the program, as well as by the deterioration of the quality of the text: light stripes, faded display, and not completely printed areas.
  • When replacing the ink tank, do not touch the contacts of the containers, otherwise the stains will badly affect the print.
  • Distinguish between chip and non-chip cartridges. Namely: those equipped with a chip can report the need for replacement. Those in which it is absent are cheaper, but it is necessary to calculate the supply of paint yourself according to the amount of work already done.
  • When purchasing a new replacement cassette, it is convenient to use the markings on the old one, which can be recorded or photographed to find an analogy.
  • Link of one black ink cartridge lasts about 95 pages (according to the manufacturer. up to 130).

Replacing the printer tanks is fairly quick. But at the same time, you need to know how this is done. Otherwise, it is better to turn to professionals.

NNCXV.INFO 2021