How to remove a cartridge from an HP printer

How to remove a cartridge from an HP printer?

Here is a list of tasks for which cartridge removal is generally necessary:

  • the coloring matter (ink, powder) has run out;
  • there is poor or faint typing of the text;
  • a sheet of paper has jammed and has stopped the operation of the device;
  • stripes, streaks, blots are observed on the printed paper;
  • an error has lit up on the computer monitor or printer display.

Removing the cartridge from the printer is not difficult. Difficulties can arise only the first time. Then you will do it with your eyes closed.

remove, cartridge, printer

First, find the instructions. Often it clearly describes how to remove the cartridge correctly. Many manufacturers use diagrams or even pictures in their instructions that make the user’s life extremely easy. Cheat sheet images are also found on the body of the device itself: on the back, side or under the top cover.

For most printer models, this procedure is similar, since the position and fixation of the cartridges are almost the same.

The cartridge is stuck in the HP printer?

There may be several reasons for the cartridge jam. the latch could have jammed or jammed, or the cartridge could be skewed in the guide grooves. Also, with the previous installation of the cartridge, some part could, as it were, match with another, in the wrong position.

Gently, slowly and smoothly drag the cartridge along the grooves. most likely, it will eventually succumb. If, in the end, you did not succumb, then this problem can be corrected only with the help of specialists who will pull out the cartridge for you as carefully as possible, without damaging the printer parts and without damaging the cartridge itself.

It is the specialists who possess a set of necessary tools, the necessary skills and knowledge that will help keep your printer in working order during such unpleasant moments. Therefore, if the cartridge is stuck, then it is worth entrusting this work to them, so that later you do not pay a much higher amount for printer repairs.

HP has been manufacturing printers and multifunctional products for many years. Among the models of this equipment, there are both laser and inkjet machines, differing not only in the printing aLGorithm, but also in structure. Each of these models has at least one cartridge, which sometimes needs to be refilled. You can do this yourself, but you will need to remove the ink bottle before starting the procedure.

How to remove the cartridge from the HP laserjet printer

Printers are in demand in various fields of activity. over, they are regularly used at home. Despite the ease of use of the device, it must be properly and most importantly regularly looked after. Of course, service maintenance can be entrusted to specialists, but if there is no desire to pay money to specialists, you can perform all the necessary procedures yourself.

One of the easiest tasks an inexperienced user can face is pulling out the cartridge. For those who have already dealt with printer maintenance, this task may seem surprisingly simple, but if this is your first time, read this article. She will answer all the questions you need.

Laser Devices

Laser printers use a black toner cartridge that is much faster than inkjet models. The toner itself is one of the components of the cartridge, where there is an imaging drum and other important elements. This entire block is removed from the printer, and only then it is refilled. The whole procedure is completed in just a few minutes:

  • Turn off the printer and disconnect power. Only proceed to the next step after making sure that the printer is cool and that the room is at a normal temperature and humidity. Precautions are necessary to ensure that the remaining powder does not collapse into lumps, complicating the refueling operation.
  • Open the top cover by moving your hand in the appropriate direction.

Grasp the cartridge by the handle and pull it lightly. If you suddenly feel that some part is interfering with normal removal, carefully examine the insides. you may have to open the securing latch on both sides of the cartridge.

READ  How to refill the HP deskjet 2130 printer

If you need to further transport the cartridge, wrap it in bubble wrap and put it in a dark box.

When proceeding with the removed ink tank, take special care: hold the structure by the edges so as not to touch fragile parts with your hands. If you need to self-refill the cartridge, we recommend that you familiarize yourself with our separate material on this topic by clicking on the link below.

Removing cartridges from HP printers

As mentioned earlier, there are laser and inkjet devices. They are in approximately the same demand, so they are distributed in the same way. Because of this, we would like not to focus on any one type, but to tell in detail about each, presenting separate instructions.

How to remove a cartridge from an HP printer?

No force is required to pull the cartridge out of the printer. If done correctly, the cartridge slides easily into the guide grooves.

Then, check if the printer is turned on. Inkjet models of printers allow you to pull out the cartridge only when it is turned on, in laser models there may not be such a need.

You need to find a cover that blocks access to the cartridge. On its inside, all manufacturers post a picture. instructions for replacing the cartridge, which you can use to pull out the cartridge.

Many printer models are equipped with a work panel, where commands will be displayed on the screen, prompting the procedure for replacing the cartridge.

In some models of devices that combine a printer, scanner and copier, the cover that prevents access to the cartridge is located under the scanning unit.

In inkjet printers, once removed, the print head is automatically positioned against the access cover. After stopping it, you can take out the cartridge.

Inkjet devices

In inkjet technology, two or four cartridges are usually installed, depending on the used printer or MFP model. They do not form a single system as is done in laser equipment, but are separate small components that are installed in appropriate places. Each of these containers is removed individually, and this can be done as follows:

  • Turn off the power to the printer and wait until it stops working completely.
  • Open the top cover according to its design. For example, in some devices, it is enough to lower it down by grasping a special recess, and sometimes you need to press the corresponding button and completely detach the panel.

Then press on the cartridge until a characteristic click appears. If there is a holder, you must first lift it up, otherwise you will not be able to detach the ink tank.

After that, you can proceed to installing new cartridges, refilling existing ones, cleaning them, or connecting a continuous ink supply system. Read about all these procedures in expanded form in our other materials listed below.

As for the disposal of cartridges, this must be done in accordance with the established rules of the area of ​​residence, because such elements need to be recycled, and when they are thrown out in the wrong places, nature is polluted with materials that do not decompose for a long time.

You are now familiar with cartridge removal techniques for different types of printing equipment. Although we have indicated various nuances, there are still many varieties of models and series of devices with their own technical features that must be taken into account in any interventions in the system. Therefore, before removing the cartridge, we strongly recommend the available instructions for the model used.

Thank the author, share the article on social networks.

Today I will tell you how to remove the cartridge from the MFP, and how to insert the paper correctly.

This is what the HP MFP P1132MFP series looks like.

To remove the cartridge, you first need to lift the first (top) cover. It lifts easily and locks in the open position by means of a spring.

Then you need to lift the second cover. In a small recess, we pick it up with a finger and lift it up. When lifted, she gets into poses and locks.

READ  Where To Find Your HP Printer Pin

We now see the cartridge. We take it by the flat handle and pull it up and towards us.

If necessary, you can clean or change it.

We also easily insert it back. We lower the cartridge along the guides (you will see them on the sides) and press a little.

Check that the cartridge is level and not loose.

In order to insert paper, you need to pull out the lower tray.

We align the paper using two moving grooves (they adjust the paper size and the evenness of the insert).

If the paper is crooked, then the printer will either not take it for printing, or it will jam.

In such a simple, uncommon way, you can take out the cartridge and insert the paper.

You can watch the video instruction below.

How to Remove Cartridge from Samsung Printer

In order to remove the cartridge from the Samsung printer, you must:

  • turn on the printer;
  • carefully fold down the front cover. it is located under the printout tray and has a special stop for opening;
  • gently pull on the opened cartridge handle. to facilitate sliding in the grooves, it must be slightly raised.

General rules for removing the cartridge

Pull the cartridge out of the printer if:

  • the toner or ink out light is flashing;
  • the lines on the printout are too faint;
  • a white stripe forms on the side of the printed sheet;
  • a sheet is jammed or torn in the printer.

First, you need to carefully inspect the printer and determine its manufacturer and type. Typically, the printer brand is listed on the front operation panel. The printer type can be determined by looking at the printed sheet. If it is impossible to read the name on the front panel, there is always a label on the back of the printer with the full name of the manufacturer, model, and serial number of the device. The same information is displayed on request in the computer menu Start. Devices and Printers.

By requesting information on the model in search engines and the question: “How to remove the cartridge from the printer?” we will get links with a video that clearly shows the replacement process.

No force is required to pull the cartridge out of the printer. If done correctly, the cartridge slides easily into the guide grooves.

Then, check if the printer is turned on. Inkjet models of printers allow you to pull out the cartridge only when it is turned on, in laser models there may not be such a need.

You need to find a cover that blocks access to the cartridge. On its inside, all manufacturers post a picture. instructions for replacing the cartridge, which you can use to pull out the cartridge.

Many printer models are equipped with a work panel, where commands will be displayed on the screen, prompting the procedure for replacing the cartridge.

In some models of devices that combine a printer, scanner and copier, the cover that prevents access to the cartridge is located under the scanning unit.

In inkjet printers, once removed, the print head is automatically positioned against the access cover. After stopping it, you can take out the cartridge.

It needs to be checked to see if there are locking levers that hold it in place. If they are, then in order to pull out the unit, you need to lower the levers and disconnect the cartridge by moving towards you.

In some cases, it is pulled straight up.

When pulling out the laser cartridge, you need to be careful. if there is a poor-quality refill, you can get very dirty with toner.

Removing the cartridge from the HP printer

A large number of modifications of HP printers are in use. Let’s take a look at how to remove a cartridge using the example of the HP Laserjet M1132 MFP black and white laser printer and the HP Deskjet inkjet printer.

To remove the cartridge from the HP Laserjet M1132 MFP Multifunction Printer, the photo follows:

  • Carefully tilt the HP Laserjet Upper Scanner Unit until it locks in place with the special levers;
  • some models have a cover that additionally closes access to the cartridge, it must be lifted;
  • carefully, without effort, pull on the black plastic handle of the cartridge, it should easily move along the guiding grooves;
  • the control panel will display the message that the cartridge is missing.
READ  How To Connect HP 2630 Printer

To remove the cartridge from the HP Deskjet printer:

  • turn on the printer;
  • find and open the cartridge access door on the front of the printer;
  • wait until the print head is fixed;
  • gently push down on the cartridge and pull it out of the slot.

How to remove a cartridge from different printers

If the printer stops in the middle of printing and the toner light on the panel is flashing, you need to replace the cartridge. Many do not know how to remove the cartridge from the printer for this. The procedure is not complicated, you need to perform several steps correctly.

How to remove a cartridge from a Canon printer

Canon printers come in inkjet and monochrome and color laser printers.

In order to remove the cartridge from the Canon printer you need:

  • if the tray for loading paper is at the bottom of the printer, then lift the top cover for receiving printouts;
  • fold back the protective cover of the device, for convenience there is a special recess in it;
  • pull out the cartridge by the handle of the case;
  • if paper is loaded from above in the printer, then the cover flips down.
  • when the cartridge is pulled out correctly, no effort is required for action.

To replace ink cartridges in a Canon Pixma 2 printer from this manufacturer, you should:

  • turn on the printer and wait for the download;
  • wait until the carriage is installed;
  • de-energize the printer by pulling the power cord out of the socket;
  • if the cartridges have a locking lever or a cover, it must be raised, the levers should be lowered;
  • l Push down on the cartridge and pull it straight out of the slot.

Types of printers and cartridges

The most common types of printers that are installed in offices and homes are:

  • inkjet printers for color printing;
  • laser black and white printing;
  • color laser printers.

Many manufacturers combine print, copy and scan functions in laser products. The cartridge in a modern printer is an independent unit that can be easily removed and inserted into the device.

It contains under one building:

  • toner (coloring powder) for printing;
  • parts of the cartridge that directly print;
  • a chip that transfers information from a computer to a printer

An inkjet printer cartridge is a container, often made of transparent plastic, hermetically sealed, having a chip for communication with a computer and equipped with a print head. In some models of printers, the cartridge of each color is separately removed, there are models in which cartridges of different colors are connected into one unit with one head. In such cartridges, it is easy to control the amount of ink and the need to replace it.

How to remove a cartridge from an Epson printer

To remove the cartridge from the Epson printer, you must:

  • check if the printer is on;
  • after starting and loading the printer, open the printer cover;
  • after stopping the printer head, remove the cartridge by moving it towards you;
  • if the cartridge cannot be removed, check if there is a lock lever in the printer and change its position;
  • in some models, the cartridge is removed after light pressure on it until you hear a click.

On some Epson models, after opening the cartridge cover for 3 seconds. press the ink control button. After that, remove the cartridge straight up, squeezing the edge to release the latches.