How to Remove Cartridge From Printer

How to remove a cartridge from different Canon printers

The way to get the cartridge out of your Canon printer depends on the individual model. Next, we will tell you where the ink tanks are and how to remove them from the inkjet or laser all-in-one printer.

Precautions

Before removing the cartridge, remember:

  • DO NOT touch the nozzles and electrical contacts on the ink bottle as they may be damaged;
  • When the container is NOT pulled out, avoid using force. Reinsert the tank and try to remove it again;
  • Do not start printing until the ink is replaced;
  • DO NOT take out the paint tank unnecessarily. Close the cover that leads to the cartridge compartment so that debris does not get there and the ink does not dry out.

How to remove a cartridge from a Canon inkjet printer

The following steps are suitable for the owner of Canon systems PIXMA, G1400, MG2540S, MG3040, MG3640.

  • Enable all-in-one printer.
  • Close the recording paper bin.
  • Open the back cover where the cartridges are located. NOT removing the container until the holder stops moving.
  • Press your finger on the top of the inkwell, until you hear a click. this will indicate a loosening of the fastening.
  • Pull the tank to remove the cartridge from the slot.
  • Insert the paint tank, repeat the steps in reverse order.

Note! Some models are equipped with a tank holder, which must be removed first.

10 minutes after opening the lid, the holder will return to its standard position. When you need to put the ink bottle back in, close and reopen the back cover.

In the CISS (continuous ink supply system), there are no cartridges: they are replaced by containers, filled with ink, taken outside the all-in-one printer housing. Instead of replacing, the tanks are filled manually, which is more economical than buying new cartridges.

How to remove a cartridge from a Canon laser printer

The principle of how to remove a cartridge from a laser printer like the Canon i-SENSYS MF3010 is different from that of the second type. Remove rings, watches or bracelets beforehand. this will prevent damage to the device. Now do the following:

  • Disconnect the printer from the network;
  • Open the top or side cover;
  • Lift the top panel using the special notch;
  • Remove the cartridge by pulling the handle;
  • If you cannot remove the inkwell, try leading it in different directions.

Important! The reason why it is difficult to pull out the ink tank is debris (paper clip, piece of sheet) that is blocking the cartridge. Shine a flashlight inside the case and remove excess.

Depending on the printer, the ink tank may be equipped with additional locks, which should be stated in the instructions for the device.

To remove a cartridge from an all-in-one printer or printer, you just need to know where it is and be familiar with the removal method depending on the type of all-in-one printer. Process Takes 2-5 minutes, which is influenced by the number of additional mounts or the ink tank arrangement.

How to remove a cartridge from printers from different manufacturers

Although we want to, it is not always possible to avoid a collision with the Filling of technology. and this is especially true for printers. This office miracle can jam paper, leave a blot on a printed document, disconnect from your computer or use up all the ink in a cartridge. The cartridges will have to be changed anyway, but sometimes it is quite difficult to do it.

Let’s see how easy it is to remove the cartridge from the printer.

When to remove a cartridge from the printer

There can be several reasons for removing the cartridge.

First, if the paint runs out. The printer will warn you about this in advance, when the lack of ink does not yet affect the print quality, but then the color rendition begins to deteriorate, black ink will start Blackey and, in total, the corresponding error will pop up.

Secondly, if the device generates an error, although no warnings appear. In this case, a simple reinstallation of the cartridge into the system may be enough, but sometimes you have to replace the chip or call a specialist.

Finally, if the printer has jammed the paper, left incomprehensible streaks, blots and other strange marks on it.

Types of printers and cartridges. General recommendations

  • Safety precautions must be followed. Before interfering with the system Remove any jewelry from your hands: rings, bracelets, gloves and everything else that can catch on the mechanism; roll up your sleeves.
  • Determine which printer you have. Inkjet printers often require switching on (otherwise the cartridges will be difficult to remove), laser printers. on the contrary, disconnecting from the network.
  • Open the cover and find the cartridges. They are easy to identify by paint (where the container is transparent) and special markings: C, M, Y. for color cartridges (sometimes just C), for black. K or B; also common color markings with numbers.
  • Remove paper from printer before removing cartridge.
  • DO NOT use brute force. everything can be inserted without it if you use the correct levers.
  • Be careful with laser printers. they have a hot fuser. It is best to wait ten minutes after turning off the printer so as not to burn yourself.

How to remove a cartridge from a Canon printer

In Canon inkjet Pixma printers (MP250, TS9540, etc.), cartridge removal is fairly straightforward.

  • Start the printer and wait for the device to load.
  • After opening the cover, secure it and wait until the carriage with cartridges stops. The place to be pulled is specially marked and is usually located under the scanning part.
  • Lift the clamp (or pinch the tab) holding the cartridge and gently pull it out of the slot.

It should be borne in mind that some printers (G series) have an uninterrupted ink supply system and there is no need to change cartridges, you just need to refuel them through special compartments.

In the case of laser printers like Canon LBP, everything is even simpler.

  • Disable printer.
  • Open the lid.
  • Pull on the handle on the cartridge that allows you to pull it out with minimal effort.

The only confusion may arise when looking for a cartridge, but, as a rule, it has a special paper sticker with the word “cartridge”. the pen is underneath.

How to Remove Cartridge from Samsung Printer

The inkjet printer ink set may differ for each specific model. Most work with three color inks and one black (CMYK), but there are, for example, six colors. You also need to make sure the quality of the ink, their compatibility with the printer. Unfortunately, printer manufacturers like HP or Xerox DO NOT produce their own inks, so you have to follow the advice from the Internet.

So, how to refuel an inkjet printer yourself:

  • First, look at the type of cartridges on the packaging or in the instructions for the printer, look for ink compatibility with them.
  • After ink selection, prepare one syringe and needle for each color. Remove the cartridge from the carriage and locate the holes in the cartridge. They are usually located behind a sticker on the back wall (in this case, it must be removed and put aside at the end of the reloading) and are already ready for using the syringe, but there are also recesses without holes. Then you need to make punctures with a needle yourself.
  • Draw 2-3 milliliters of paint with a syringe and insert the syringe a couple of centimeters deep. Slowly inject ink until there is NO excess around the hole. take back some ink and blot the nozzle with a paper towel and rubbing alcohol. Cover the hole with a sticker or tape.
  • Repeat this operation for all holes. It is very important NOT to confuse the colors. there are special instruction pictures for this.

How to get the cartridge out of HP and Canon printers. Instruction

So, you have a question about how to get a cartridge from a Canon, HP or any other printer in order to replace or refill it, but at the same time you do NOT want to overpay for this to the master? This is an extremely simple procedure that can be carried out by any person, even completely far from technology. The main thing. Do it carefully and do not rush anywhere, otherwise you may damage something in the printer. How to get the cartridge out of the printer You will learn about this from this article and be surprised how easy it is in most cases.

Training

You will need a flashlight (preferably bright with a white light). First of all, you should refer to the instructions. As a rule, it clearly and in some detail explains how to get the cartridge out of the printer. This procedure is similar for different printer models, as their internal cartridge retention is almost the same. Now you need to turn on the printer power. Wait a bit before it starts up. Then you can safely open the lid. As a rule, after this, the Printhead with the cartridge attached to it rises itself to a position that allows you to remove the cartridge. Wait until the mechanism stops working and proceed to remove the cartridge.

Retrieving

In most printer models, the cartridge can be removed by simply pulling it towards you. At the same time, the latch automatically snaps off, and the cartridge should be pulled out without problems. If this method does not work, then do not pull the cartridge with difficulty, because otherwise you can simply break it. Look carefully, maybe there is a special release lever somewhere? If there is one, then move it to another position, then try to pull out the cartridge again. It should work.

Important addition

In some models of printers, to remove the cartridge, you must first press lightly on it with a click sound, and then. Retrieve. In addition, there are printers, which are somewhat more complicated, where you need to remove the entire print head before removing the cartridge, but, as a rule, these are industrial printers. Large and complex, in them It is better not to try to change the cartridge on your own, but to use the services of a master specializing in these devices. Home and office printers usually have these complexities. Now you know how to get a cartridge out of an HP printer or any other by yourself.

READ  Install pantum m6500 printer without installation disc

The most important thing. DO NOT be nervous and do not rush during this procedure. DO NOT force anything. If something doesn’t want to disconnect. It does NOT mean it should. You are most likely doing it wrong. Read the instructions for your printer carefully again. If you don’t have it, you can find it on the Internet. You can also visit the forums dedicated to your printer model, or the manufacturer’s official support site. In extreme cases, you can contact the service center, where they will definitely help you with your problem, they will explain in more detail how to get the cartridge out of the printer yourself in the future. Do NOT be alarmed if this is your first time doing this. Everything will work out.

How to properly remove the cartridge from the Canon printer. How to remove Katrich from the printer. How to remove a cartridge from HP, Canon and Epson printers

If the printer stops in the middle of printing and the toner light on the panel is flashing, you need to replace the cartridge. Many do not know how to remove the cartridge from the printer for this. The procedure is not complicated, you need to perform several steps correctly.

Types of printers and cartridges

The most common types of printers that are installed in offices and homes are:

  • Color inkjet printers;
  • Laser black and white printing;
  • Color laser printers.

Many manufacturers combine print, copy and scan functions in laser products. The cartridge in a modern printer is an independent unit, which can be easily removed and inserted into the device.

It contains under one building:

  • Toner (coloring powder) for printing;
  • Parts of the cartridge that provide direct printing;
  • Chip that transmits information from a computer to a printer

An inkjet cartridge is a container, often made of transparent plastic, hermetically sealed, having a chip for communicating with a computer and equipped with a print head. In some models of printers, the cartridge of each color is separately removed, there are models in which cartridges of different colors are connected into one unit with one head. In such cartridges, it is easy to control the amount of ink and the need to replace it.

General rules for removing the cartridge

Remove the cartridge from the printer if:

  • The toner or ink out light is flashing;
  • The lines on the printouts are too faint;
  • A white stripe forms on the side of the printed sheet;
  • A letter is stuck or torn in the printer.

There are some general rules according to which the cartridge is removed from any type of device.

First, you need to carefully inspect the printer and determine its manufacturer and type. Typically, the printer brand is listed on the front operation panel. The printer type can be determined by looking at the printed sheet. If it is impossible to read the name on the front panel, there is always a label on the back of the printer with the full name of the manufacturer, model, and serial number of the device. The same information is displayed upon request in the computer menu Start. Devices and Printers.

I invited information on the model and the question: “How to remove the cartridge from the printer” in the search engines, we will get links from a video that clearly shows the replacement process.

It is not necessary to use force to remove the cartridge from the printer. If done correctly, the cartridge slides easily into the guide slots.

Then, check if the printer is turned on. Inkjet models of printers allow you to pull out the cartridge only when turned on, in laser there may not be such a need.

You need to find a cover that blocks access to the cartridge. On its inside, all manufacturers place a picture. instructions for replacing the cartridge, which you can use to pull out the cartridge.

Many printer models are equipped with a work panel, where commands will be displayed on the screen, prompting the procedure for replacing the cartridge.

On some product models that combine a printer, scanner and copier, the cover that prevents access to the cartridge is located under the scanning part.

In inkjet printers, once removed, the print head is automatically positioned against the access cover. After it stops, you can take out the cartridge.

It is necessary to check if there are locking levers that hold it in place. If they are, then in order to pull out the block, you need to lower the levers and disconnect the cartridge with a movement towards you.

In some cases, it is pulled straight up.

When pulling out the laser cartridge, you need to be careful. if there is a poor-quality refill, you can get very dirty with toner.

Removing the cartridge from the HP printer

A large number of modifications of HP printers are in use. Let’s take a look at how to remove a cartridge using the example of the HP Laserjet M1132 all-in-one printer and the HP Deskjet inkjet printer.

To remove the cartridge from the HP Laserjet M1132 all-in-one printer, the photo follows:

  • Carefully flip up the HP Laserjet Upper Scanner Unit until it locks into place with the Special Levers;
  • Some models have a cover that additionally closes access to the cartridge, it must be lifted;
  • Gently, without effort, pull on the black plastic handle of the cartridge, it should easily move along the guide grooves;
  • The control panel will display the message that the cartridge is missing.

Removing the cartridge from the HP printer

To remove the cartridge from the HP Deskjet printer:

  • Turn on the printer
  • Find and open the cartridge access cover on the front panel of the printer;
  • Wait until the Printhead locks in;
  • Gently, pressed on the cartridge, pull it out of the slot.

Removing the cartridge from the HP printer

How to Remove Cartridge from Samsung Printer

In order to remove the cartridge from the Samsung printer you need:

  • Turn on the printer
  • Carefully fold back the front cover. it is located under the print output tray and has a special stop for opening;
  • Gently pull on the opened cartridge handle. to facilitate sliding in the grooves, it must be slightly raised.

How to remove cartridge from Canon printer

Canon printers are available in inkjet and monochrome and color laser printers.

In order to remove the cartridge from the Canon printer you need:

  • If the tray for loading paper is at the bottom of the printer, then lift the top cover for receiving printouts;
  • Fold back the protective cover of the device; for convenience there is a special recess in it;
  • Pull out the cartridge by the handle of the case;
  • If paper is loaded from above in the printer, then the cover flips down.
  • When the cartridge is pulled out correctly, action does NOT require any effort.

To replace ink cartridges in a Canon Pixma 2 printer from this manufacturer, you should:

  • Turn on the printer and wait for the download;
  • Wait until the carriage is installed;
  • Disconnect power to the printer by unplugging the power cord
  • If the cartridges have a locking lever or a cover, it must be raised, the levers will be lowered;
  • L pressed down on the cartridge, pull it out of the slot towards you.

How to remove a cartridge from an Epson printer

To remove the cartridge from the Epson printer you need:

  • Check if the printer is on
  • After starting and loading the printer, open the printer cover;
  • After stopping the printer head By pulling out the cartridge towards you;
  • If the cartridge is removed, check if there is a lock lever in the printer and change its position;
  • On some models, the cartridge will come off after light pressure on it with a click.

For some Epson models, after opening the cartridge cover for 3 seconds. Press the ink control button. After that, remove the cartridge straight up, squeezing the edge to release the latches.

How to get the cartridge out of the printer correctly photo

Removing the cartridge from the printer?

Many users of printing devices are interested in the question of how to remove the cartridge from the printer, because often in the process of use we are faced with a similar need.

Manufacturers advise to interfere less with the operation of the device, especially when it comes to its internal components. But the question of how to remove the cartridge from the printer can be relevant in many situations:

  • – the text has ceased to be printed;
  • – the device began to chew on the paper;
  • – drum started bundles of material.

Therefore, we advise you to understand this topical issue.

Removing the cartridge

Use electrical appliances in the same way as before and pay 2 times less!

You can pay 30-50% less for light, depending on what kind of electrical appliances you use.

It is recommended to first remove all metal objects from your hands so as not to get damaged. When discussing how to remove a cartridge from an HP printer, carefully open the cover first. However, contact with a heated fuser should be avoided. Then you should find a lever to loosen the Special clamps.

Pull the cartridge out of the printer. When building a part, it is not recommended to take independent measures. With this question you need to contact the service center.

Working with an inkjet printer

The question of how to remove a cartridge from an HP printer interests users when the device simply ceases to perform its function. Printing defects may appear:

  • – white stripes,
  • – black stains,
  • – gaps in print,
  • – fuzzy letters and images.
READ  How To Insert Paper Into Printer

In such situations, it is recommended that you remove the old cartridge to install a new one. If you are using inkjet equipment, then the replacement procedure may be needed pretty soon.

Beforehand, it is recommended to make sure that you disconnect the equipment from the network. Then you need to open the tray Used for paper. The cover of the device is opened and secured with a stop. To remove the cartridge without any problem, wait for the device to completely stop after opening the cover. DO NOT touch the print head during the process. The user needs to open the locking box in which the cartridge is placed and pull the part out of the compartment. Be careful: the parts of the device may be stained with ink. Handle the cartridge with care so as not to damage any part. It is recommended NOT to raise the drum shutter and DO NOT leave the equipment in direct sunlight.

The thematic

How to open a Canon printer and get / pull out a cartridge from a Canon printer

In the process of printer operation, a situation often appears when there is almost no ink in the cartridge, and you need to pull it out in order to refill or replace it with a new one. Basically, this process is NOT difficult if you can do all the procedures accurately and correctly.

The most important thing is Do not rush, do everything as carefully as possible, And do not try to put a lot of physical strength into the process, as this can lead to something accidentally breaking. First of all, you need to follow the instructions. As a rule, in it, not only is it very clear and written in detail, but also NOT rarely there is a photo of the instruction, where arrows describe how to get it, remove it, and then how to insert the cartridge into the printer. Often, even in different brands, this procedure is very similar, since the distribution and fastening of cartridges in the devices are almost the same.

First, we need to power off the printer. After that, you need to wait a bit, since it is important that the printer is completely ready and started. Now we open the cover of your device. Often, after such an action, the head very easily moves to the place where the cover needs to be removed. Wait until the head movement is completely stopped and then try to remove the cartridges.

How to remove a cartridge from a Canon printer

On most models, the cartridge is removed by pulling it towards you. At the same time, it is released from the retainer and is perfectly removed. At the same time, a characteristic click is heard, which means that the latch does not hold the cartridge. If this method did not give results, and you do not yet understand how to remove the cartridge from the Canon printer, do not pull the cartridge too hard, otherwise you will simply break it. Look, maybe there is a special release lever somewhere. If one is found, just move it to another position and you can pull out the cartridge. In some models, to figure out how to remove the cartridge from the Canon printer, you just need to press on it, slightly. After that, a click is heard and then the cartridge is easily removed from the printheads. Certain models of printers are designed in such a way that it is easier to remove the entire printhead, and then remove the cartridge from it. This should also be remembered if you do not know how to get a cartridge from a Canon printer.

How to open a Canon printer

The main thing is, do not rush and I do NOT get nervous when extracting, NOT jerking anything with labor. If something doesn’t want to detach, This does not mean that the element needs to be pulled out of the printer by force, maybe you just do something wrong. Once again, carefully read the instructions for the printer. If it is not there, search the Internet for information about your device, and you will find everything related to removing the cartridge. You can also visit forums specializing in this topic and ask your question there. As a last resort, Contact the service center, as they will help you with the problem and explain in detail how to properly remove the cartridge from your printer. Ink or toner is enough to print a certain number of pages, and then each printer owner is faced with the need to change or refill the cartridge. Therefore, you need to be able to extract it and install it back. The design of different models of Canon printing equipment differs from each other, but individual units have much in common.

How to remove cartridge from Canon mg2440 printer

Perhaps the easiest way to get a monochrome printer is a laser cartridge, it doesn’t even require a network connection. The main thing here is to get to the very detail. For printers with a paper tray at the bottom, lift up the top cover (often made of translucent plastic) that receives the printed pages. Then open the second one that covers the internal mechanism of the device. This cover has a small notch (it can be located on the left or on the right), under which you can easily slip your fingertips. Some Canon printers, such as the LBP810, load paper from the top. In such a printer, the cartridge is usually placed behind a cover located on the front of the housing. Pull it towards you and fold it down. Now the path is clear and the cartridge can be easily pulled out by the handle. It is also easy to return the part back, but if something does not work out, you cannot use force in any case. It may be skewed and in order to avoid breakage it is better to make a second attempt. When the cartridge is brought straight to the guides, it practically falls into its intended place. The final stage: press to a characteristic click, so that the contacts are in place. The location and design of the cartridges depends on the technology used in a particular device. For example, the Canon i-SENSYS LBP7110Cw printer operates on the Single Pass method and includes four SEPARATE print engines. The cartridges are located one after the other in a specially designed tray. Their replacement is carried out as follows: pull towards yourself and lower the cover on the front wall of the device; pull the block out by the handle; get out the cartridge that needs refilling; set full.Important: do not leave the cover open in the printer, remember that the drum unit may light up.

How to remove the cartridge from the printer photo instruction

How to remove the cartridge from the printer?

The question of how to get a cartridge from an HP printer or other model of printing device worries many users of such equipment. On the one hand, the procedure is not complicated. On the other hand, there are many nuances that must be taken into account during the procedure. Let’s deal with some of them.

remove, cartridge, printer

Cartridge removal instructions

When deciding how to remove a cartridge from a samsung printer or a device of another brand, decide whether it is better not to visit a service center with this question. Otherwise, be sure to first remove all metal objects from your hands so as not to get damaged.

Some safety points:

Use electrical appliances in the same way as before and pay 2 times less!

You can pay 30-50% less for light, depending on what kind of electrical appliances you use.

  • – check the disconnection of the device from the network;
  • – avoid contact with the fuser, as this part gets very hot;
  • – handle the cartridge clips carefully.

Working with inkjet device types

Inkjet printers require a cartridge replacement if gaps or black streaks appear during printing. How to get a cartridge out of a Samsung printer is an actual question in a situation when the device jams on paper.

Inkjet technology is designed for a shorter cartridge life, which the user must remember. Understanding how to remove a cartridge from a samsung printer or second equipment, first, lift and fix its cover. At this point, the cartridges can still move by inertia, so wait until it stops completely. Do not hold the latch yourself so as not to damage the equipment.

Most printers have a special cartridge fixing box. The latter is easy to remove, easily pressed down on the front of the block and slightly lowered the part down. Aligning the printheads may be necessary after this procedure. Be careful not to get smeared with ink.

Do not leave the device without a cartridge for a long time, as the parts may dry out. Removing the cartridge from the printer without Raising the drum shutter and DO NOT leave the device in direct sunlight.

The procedure should not take more than 2-3 minutes, otherwise the ink may dry out. Therefore, it is recommended to act promptly.

Below is a video with an example of how the procedure takes place:

How to remove a cartridge from a Canon printer?

Why remove a cartridge from a Canon printer?

Immediately, we note that there are a number of situations when it becomes necessary to remove the cartridge:

  • Toner is used up or ink is dry;
  • The paper is jammed in the output tray;
  • Gave a print error;
  • The printing process is not correct;
  • Blots, streaks, and streaks appear on the printed document.

How to remove a cartridge from a Canon inkjet printer?

Removing Canon inkjet cartridges begins with the standard turn on of the printer, but the following steps must be performed in the recommended order:

  • Open the sheet feeding tray, and also open the output compartment.
  • Removing any paper in the tray.
  • We open the technological compartment, at this time the carriage begins to smoothly go from the parking compartment to the service window. Attention! It is forbidden in any way to obstruct its movement.
  • Then the latch will open and the cartridge can be removed freely. But do not forget to exclude any contact with the encoder tape, which is intended to ensure the correct position of the carriage. Removing this mechanism from the working state will entail expensive repairs.
READ  How to check an Apple Watch for originality

On a note! The cartridges are removed only when urgently needed, because long-term storage outside the parking space negatively affects the technical parameters of consumables.

How to remove a cartridge from a Canon laser printer?

To remove the laser cartridge, you must turn on the printer itself, wait for it to warm up and start the Removal procedure:

  • Remove the paper tray (this step is to be performed for the entire Canon lineup).
  • Raise the outlet caps.
  • Open the compartment of the technological department.
  • While holding the cartridge with special clamps, turn it over and pull it out by the handles with smooth movements until it is completely removed.

The removed cartridges must be handed over to the Miraxprint service center or call our master, who will come to you anywhere in Moscow 24/7!

How to remove a cartridge from a Canon printer photo instruction

How to remove a cartridge from a Canon printer?

For many users of modern office equipment, the problem of replacing consumables is NOT a problem. However, for beginners, as well as those who purchase a new model of a printing device, certain difficulties arise when servicing the device. After the question “How to remove the cartridge from the Canon printer?” is considered one of the most relevant. And the answer to this question you can find in this article.

So, in order to remove the cartridge from the printer, you should initially decide on the model name. For those who own Canon printers, the process of removing consumables will not be difficult. And before you get the cartridge out of the Canon printer, you should read the accompanying instructions, in particular, the location of the corresponding buttons. Although the procedure for removing the cartridge is different in each printer, the carriage with the ink containers moves out automatically anyway.

Use electrical appliances in the same way as before and pay 2 times less!

You can pay 30-50% less for light, depending on what kind of electrical appliances you use.

So, for example, for those who are wondering how to remove a cartridge from a Canon printer, first open the cover. The carriage with containers of consumables can be extended by itself, or after pressing the appropriate key. In the second all-in-one printer Canon models, the removal of cartridges from printers occurs in almost the same way. First, the printer cover is opened, then a key is pressed, after which the part is removed by a special tab.

In general, before removing the cartridge from the Canon printer, it is imperative to clarify the features of your device model. And if there are special signs-indicators, when removing containers of consumables, you must follow them. Usually, this procedure is necessary to refill the Canon cartridge.

The video tip is below:

How to remove a cartridge from a Canon printer

Video instruction. Removing the cartridge from the Canon LBP7018C printer

The presence of a printer in the office is already a modern default, its presence even at home is NOT exotic anymore.

When trying to replace or refill a Canon printer cartridge, you may encounter an unexpected problem even at the initial stage of the process. its removal. It would seem that everything is obvious, but there are some points due to which technical difficulties may arise. In this article, I will describe in detail all the questions that you may have.

First of all, you must understand that you will carry out all the processes necessary for replacing the cartridge at your own peril and risk, therefore, if possible, Contact the Canon service center, where experienced specialists will be able to carry out all the necessary actions “on site” with departure for enough little money.

If you decide to take on the process yourself, carefully read the further information and you can avoid mistakes (a large number of them may be allowed, do not look at seemingly simple actions)

  • Connect the device to the power supply. DO NOT try to make replacement on disconnected equipment, this can lead to breakdowns and, accordingly, additional waste.
  • Open all the slots available to you, this is usually the paper receiver and the output block of already printed documents. Lift up the main cover to access the print carriage. If it is in motion, do not touch it, just wait for it to stop. This is a very important point, since the carriage is a very fragile part of the device and mechanical interference in its operation almost always leads to serious damage to the mechanism.
  • Under the carriage you will find the cartridge you are looking for, but take your time, because at this moment you must be as careful as possible and remove the cartridge without touching the rest of the device.

When removing a cartridge from a laser printer, the difficulties will be much less, since the manufacturer of this type of equipment always relies on more self-service options when using it.

The main thing to consider is that some models have additional fasteners and latches (they may not be mentioned even in the instructions that come with the printers) and if you feel the need to use sludge efforts. be sure to check, maybe you just did not notice their presence and did not disconnecting them.

As a result, following THESE simple instructions, you will be able to dismantle the cartridge without damaging the printer and refill or replace it. Refueling will certainly be cheaper and even if the manufacturer declares that it is impossible (this applies primarily to inkjet printers), you should not trust them unconditionally, they can help you in a good service, which will really save you money.

You can ask a question to the masters from our service center by calling or writing your question on the feedback form.

Canceling a print job from the printer

Printer properties

This method is suitable for those users who have the printer operating normally and no additional problems arise when interacting with it. Then the removal of the task from printing is carried out through the properties of the device itself. The easiest way to do this is as follows:

    Double-click on the icon for the printing equipment located on the taskbar.

In the context menu that appears, select the “Cancel” item and Wait until the line is removed from this list.

If this does not happen, try to re-enter this menu and check the status of the timeline again. When saving a task, only the second method will help to get rid of it.

In addition, let us pay attention to those users who do not have such an icon on the taskbar due to the fact that it is simply hidden or not displayed for other reasons. Then you should remove the print task through the “Options” menu.

    To do this, open “Start” and go to the corresponding application, clicked on the icon in the form of a gear.

In the window that appears, select the category “Devices”.

In the list of parameters you are interested in “Printers and scanners”.

The management tools will appear, among which select “Open Queue”. If it is missing, then there are no tasks in the queue for this printer.

In the cancel queue management window, printing a specific document or performing another task.

The task should be canceled in just a few seconds, so DO NOT close the current window, but wait until the line is deleted.

Manual cancellation of all tasks

This method is radical and immediately cancels all tasks that are currently stored in the queue. It will be optimal for those users who, for various reasons, do not fit the previous option. In this case, the algorithm of actions becomes a little more complicated, so follow the instructions exactly to cope with this.

    Open “Start” and find the “Services” application there, which open.

Find the term “Print Manager” and double click on it to go to properties.

Stop this service, click on the corresponding button, and then apply the changes.

Go to “Explorer” and paste the path C: \ Windows \ System32 \ Spool \ PRINTERS into the address bar.

In the root of the destination directory, you will find all the files that are the tasks that are in the queue. Accordingly, they need to be deleted in order to clear the list.

Then it is advisable to restart the computer and return to “Services”, where start the previously disabled service.

If you cancel tasks to normalize the printer, everything should succeed unless another malfunction is a prerequisite for the performance problem.