How to Remove Jammed Paper From Canon Printer

Paper is jammed inside the product

If jammed paper tears and cannot be removed from the paper exit slot or feed module, or if jammed paper remains inside the machine. Remove the paper by following these steps.

Watching a movie (Windows)

Watching a movie (Mac)

Note.

If you want to turn off the machine to remove jammed paper while printing, press the Stop button to cancel printing before turning off the machine.

Turn off the device and disconnect the device from the mains.

Open the paper output tray cover.

Remove any paper from the front tray if present.

Attention!

DO NOT touch the transparencies (A).

If the transparency becomes dirty or scratched due to contact with hands or paper, the device may be damaged.

Make sure there is jammed paper under the FINE cartridge holder.

If there is jammed paper under the FINE cartridge holder, Move the FINE cartridge holder to the right or left edge to make it easier to remove the paper.

While moving the FINE cartridge holder, hold and slowly move the FINE cartridge holder to the right or left edge.

Pick up jammed paper with your hands.

If the paper is curled, remove it.

Pull the paper gently so as not to tear it, and then remove the paper.

Make sure all jammed paper is removed.

If the paper is torn, some of it may remain in the product. Check the following items and Remove any remaining paper.

Are there any torn pieces of paper left under the FINE cartridge holder? ?

Are there any small pieces of paper left inside the product? ?

Are there any pieces of paper left on the right or left side (B) of the machine? ?

Close the paper output tray cover and reload paper.

All pending print jobs are canceled. Reprint if necessary.

Note.

When reloading paper Make sure you are using suitable paper for printing and loaded correctly. If a paper jam message appears on the computer screen when you continue printing after clearing the paper jam, there may be a piece of paper left in the machine. In this case, make sure that there are NO Pieces of paper left in the machine.

If the paper cannot be removed, the paper is jammed in the product, or if the paper jams again after removing it Contact your service center.

How to remove jammed paper from a canon printer. What to do if a paper jam occurs in the printer

Occasionally, when printing, a paper jam occurs inside the devices. In order not to compromise the integrity of the structure, you need to know how to get the jammed paper out of the printer.

Printer paper

Reasons for paper jams or jams:

  • The moisture content of the paper is higher than normal, it starts to stick together;
  • Excessive static stress or dryness on the pages when the sheets stick to each other;
  • Soft edges of the sheet, which are jammed by the transmission mechanisms;
  • Skewed paper when loading into the input tray due to substandard sizes or users ignoring the guide curtains;
  • Contamination of the pick-up rollers with office debris or low-quality paper;
  • Wear on rotating rollers due to prolonged use.

Paper jam error

How to pull out

  • The first step is to disconnect the printer from the power source. It may be necessary to touch the inside of the printing device. In this case, there is a risk of getting an electrical injury when you pull out the paper.
  • Some printers, such as the Xerox 3010, HP, or Laserjet 6L, will automatically reset to the receiving tray after being disconnected from the power. If this does not happen the first time, you can repeat the operation by turning the device on and off.
  • To gently pull a page out of a printer that has a similar function, for example, in HP, you need to Flip open the cover that covers the internal mechanisms and figure out how deep the stuck letter has penetrated.
  • If most of the page is at the beginning of the feed mechanism, then we will pull it out against the movement of the rollers. To do this, take the sheet to the left and right edges, simultaneously and gradually pull it out of the device.
  • If it turns out that the paper is jammed already at the exit from the press, then we will pull it out in the direction of travel. In some modifications of laser printers, such as Canon, it is necessary to take out the cartridge in order to facilitate access to the pressing elements of the mechanism.
  • After making sure you remove the jammed paper completely, plug in the power supply and check the ready-to-print indicators on the front of the printer. If they indicate the problem persists, remove and reinsert the ink cartridge.
  • If it was not possible to pull the paper out without damage, you will have to provide maximum access to the rotating rollers. You will need to remove all removable parts of the printer and cartridge. Using an additional light source, examine the inside of the mechanism and find where to clamp the torn piece of paper. With tweezers, grab the edge and pull while rotating the pressure roller. This must be done very carefully.

Printer instructions

Paper loading instructions

In order NOT to rack your brains later on how to get the jammed paper out of the printer, you must first take care of the quality of the sheets selected for printing.

DO NOT load into the receiving tray:

  • Wrinkled or torn paper;
  • Pages held together with paper clips or staples;
  • Sheets of unacceptable thickness;
  • Glued or electrified pages.

For printing on printers, there is a special A4 paper of a certain quality and size. To prevent skewing or jamming of sheets, use it. DO NOT load thick reams of paper in the input trays, unless specified by your model.

In modern Canon, Xerox 3010 or Laserjet 6L models, it is possible to set the parameters of the paper used in the printer settings. All the information required for this can be read in the accompanying information on the packaging of the sheets.

Paper is jammed in the HP printer

These models of inkjet printers have special encoder strip sensor, which indicate the cartridge carriage its location at the beginning and end of the print time. If a mechanical paper jam is excluded, then, most likely, one of the sensors has worn out, and the device simply does not receive the “end of print” command. See the location of the sensors in the photo.

In order for HP to continue working, you first need to remove the paper from the printer, and then lubricate the encoder strip sensor with an alcohol wipe. To do this, you do not need to disassemble the device, it is enough to provide access to the tape on the shaft along which the carriage walks. Globally this will not solve the problem, but it will prolong the printer’s operation for a while.

Paper Jam in Canon Printer

For laser models, this article already lists the steps that explain what to do if a paper jam occurs in the printer. In the case when sheets get stuck in the inkjet model, they can only be pulled out when the printheads are in the service position. To do this, unplug the device from the power outlet and turn it on again. The carriage automatically rises to the beginning of the timeline in the desired position.

How to fix the situation

Pulling jammed paper out of inkjet printers is always more difficult because the rotating rollers are difficult to access. Perform similar work with the device disconnected from the power supply. If you cannot remove the entire page, and inside there are torn pieces of paper that cannot be obtained on your own, then you need to contact the service center.

Disassembling the printer yourself, unscrewing and removing parts of the mechanism, is not worth it. Do this kind of work.

Solving a Paper Jam Problem

Owners of printing devices may encounter a problem when the paper is jammed in the printer. In such a situation, there is only one way out. the letter must be obtained. This process is NOT something complicated and even an inexperienced user can cope with it, so there is no need to contact a service center to solve a problem with auto products. Let’s figure out how to pull out the paper.

Solving the problem with paper jam in the printer

Equipment models have different designs, but the procedure itself practically does not change from this. There is only one nuance that needs to be taken into account by users of devices with FINE cartridges, and in it we will talk below in the instructions. If a jam occurs, you need to do the following:

    First of all, turn off the device and completely cut off the power from the mains.

Grasp the edges of the paper and pull it towards you. Do this slowly to avoid accidentally breaking the letter or damaging internal components.

  • Make sure that you have removed all the paper and that there are NO Scraps remaining in the product.
  • The owner of laser devices is required to perform the following operation:

      With the peripherals turned off and unplugged, open the top cover and remove the cartridge.
    READ  How to connect Canon g3400 printer to WI-FI

  • Check the inside of the equipment for any remaining paper particles. If necessary, remove with your finger or use tweezers. Avoid touching metal components.
  • Reinsert the cartridge and close the cover.
  • Clearing false paper jams

    Sometimes it happens that the printer generates a paper jam error even if there are sheets inside it. First you need to check if the carriage moves freely. Everything is done quite simply:

    • Turn on the device and wait for the carriage to stop moving.
    • Open the cartridge access door.
    • Disconnect the power cord to avoid electric shock.
    • Check the carriage for ease of movement along its route. You can manually move it in different directions, making sure that nothing interferes with it.

    If faults are found, they do not recommend providing them on their own, it is better to seek help from specialists.

    If the carriage is in good condition, we advise you to do a little maintenance. You will need to clean the rollers. The process is automatic, you only need to start it, and you can do it like this:

      In the “Devices and Printers” menu, go to “Printing Preferences”, clicked RMB on your device and select the appropriate item.

    Here you are interested in the “Service” tab.

    Select “Clean Rollers”.

    Read the warning and after following all the instructions, click on “OK”.

  • Wait for the process to complete and try to print any file again.
  • Certain models of printing equipment Equipped with a special function button, which is needed to access the service menu. You will find detailed instructions on how to work with this tool on the official product page or in the manual, which is included in the kit.

    Preventing Further Paper Jams

    Let’s discuss the causes of paper jams. First of all, pay attention to the number of sheets in the tray. DO NOT load too large a stack, this will only increase the likelihood of a problem. Always check if the sheets are flat. In addition, do not allow foreign objects, such as paper clips, staples, and other debris, to enter the PCB. When using different paper thicknesses, follow these steps in the setup menu:

      From the Start menu go to Control Panel.

    In the window that opens, click on the “Devices and Printers” section.

    Find your product in the equipment list, right-click on it and open “Printing Preferences”.

    Under the Labels or Paper tab, find the Paper Type pop-up menu.

    Select the type you are going to use from the list. Some models can determine it independently, so it will be enough to specify “Detected by the printer”.

    Don’t forget to apply your changes before exiting.

    As you can see, if the printer has jammed the paper, there is nothing terrible in this comment. Solves the problem in literally a few steps, and following simple instructions will help prevent the problem from reoccurring.

    Thank the author, share the article on social networks.

    What to do if paper is jammed in the printer?

    Author: Sergey Kotov, head of the service center of the “Company Fayler”

    Paper jams in a printer are always frustrating, and it always seems like this problem can be avoided when you need to print something really urgent. But if this does happen, the first thing to do is try to remove the paper that remains inside the printer.

    • Unplug the printer from the power outlet to avoid injuring or burning your fingers.
    • Take out the paper tray and shine a flashlight inside, so that you can see any place where the paper could get trapped.
    • Open the front cover and look for jammed pages or torn pieces of paper.
    • After clearing all the jammed paper, turn on the printer and try manual feed.
    • If the letter still doesn’t go through, try to pull it out of the rollers.
    • Be neat but firm in your intentions. Try NOT to tear up the letter. If it breaks, pieces of paper may remain inside the car in a place that you cannot reach. Try to pull the paper out as it travels.
    • If possible, try removing it from where the printed pages come out. If you have a large format office printer, you will need to open the cover. There are information stickers on the cover that will show you the places where you can check for possible jams. Carefully pull out any paper that is jammed inside. Avoid touching internal parts, some of them may be hot or stained with ink.

    If you are NOT able to fix the jam yourself, you will need to be repaired by our company. The repair can be different. We can carry out maintenance of your devices, if necessary, replace spare parts that have run out.

    Printer paper jam causes, solutions and warnings.

    Paper jams are one of the most common printer problems. This problem affects everyone, regardless of whether this printer was bought for a penny or it was the most expensive trinket in the world. Unfortunately, technological advances have yet to find a way to deal with the simple mechanics of paper jams.

    Causes of paper jams.

    Printer paper jams are very frustrating for people because they see it as the only problem that occurs over and over again, this can happen for a variety of reasons. What are these reasons? Here is a list.

    • Incorrect paper loading.

    Individual sheets can stick together, just like folded or worn paper. A large number of sheets will also cause paper jams.

    The roller is what printers use to remove sheets of paper from the input tray. These rollers can suffer wear and tear over time.

    Printers are very precise machines that need everything to be in order. Poor quality paper will leave behind what technicians call “paper dust” that can accumulate over time.

    • Poor quality cartridges.

    In addition to paper jams, using low-quality cartridges may result in poor print quality. Use genuine or compatible cartridges from trusted brands.

    How to deal with printer paper jams.

    So, how would you deal with paper printer jams How do your colleagues do it? How are your children? They just ripped out the paper, didn’t they? Or at least they Try. However, this rarely works. Usually the paper will tear, leaving an even bigger problem than before. Dealing with paper jams is surprisingly easy and force is NOT the answer.

    • To clear a paper jam, you must first unplug the device as you do NOT want to deal with moving parts while trying to unlock the printer. importantly, if the device is not turned off, it can cause ink to be applied to your hands (trust us, you don’t feel good about going home to your wife with strange colored hands) or even burns if you are using laser printers.
    • The trick for decoupling the printer is to follow the normal paper path. This is important for two reasons. First, it will ensure the safety of the printer components. The printer must follow a specific path for the device to operate. When they get stuck, they better end whatever cycle they’ve been on. Another reason to follow the paper path is that going against the normal path may cause the paper to break. If the stuck letter breaks, then it will be much more difficult for you to deal with this problem, as you may need to open certain modules to Get Torn pieces of paper.
    • Occasionally you may need to remove the cartridge to get it correctly on the jammed paper. When you need to do this, you also need to pay attention to the printer carriage. Depending on the brand, this carriage can carry a cartridge, printhead, or drum. Regardless, the carriage needs to be mobile for you to type. Therefore, when you restore the carriage after removing the letter, you need to make sure that it is mobile. This does not mean that you have to move it manually. Every printer resets after shutdown, so you should see this.
    • While you are removing the jammed paper, you must also watch the rollers move. To do this, you must rotate the rollers upward towards the printer. This is important because it can reveal pieces of paper or dried ink on the roller.

    How to prevent paper jams in the printer.

    A printer paper jam will only delay printing, but it can also damage major printer components. Replacing these components can be costly. Therefore, it is much better to try to prevent printer paper jams.

    • Your paper tray should never be full. You must always leave space. After all, overloading is the main prerequisite for printer paper jams.
    • You should always be fanning the stack of paper that you are going to put in the input tray. This is done to loosen any sheets that might stick together.
    • Many printers have sliding mechanisms for storing a stack of paper. This can be very helpful to ensure uniformity. Using them to their fullest will preserve the integrity of your paper stack and prevent rogue mail problems from occurring.
    • The quality of the paper used will depend on how well the printer is performing and the quality of the output. It is recommended that you check the online guidelines before experimenting with different types of media. There are many forums, blogs and even techs available on the internet.
    • DO NOT mix several types of paper in one stack. Doing so may entangle the printer and lead to paper jams.
    • It’s also a good idea to specify what kind of printer paper you are using in the printer settings. Many printer software kits have this system where you can select the type of paper you are using from a dropdown list. This is not strictly necessary, but recommended.
    • Performing regular printer cleaning cycles is beneficial because it keeps the paper clean. It is also recommended that you turn off the printer if you are NOT going to use it for a while. Many printers have these mini-loops that fire when they are turned on. When cleaning cycles, whether mini or floor use ink, it is helpful to keep the printer running smoothly.
    READ  Which Printer To Choose For Home Use

    How to solve a printer paper jam problem

    Users of printing devices often face various problems when printing documents. One of the most unpleasant and fairly common situations is a paper jam in the printer. This can happen regardless of which brand you preferred when buying equipment and how much money you spent on it, and usually the problem is not related to the failure of the device, although this option is NOT excluded.

    The paper is jammed at the entrance, exit or inside the device and you will have to act to get it based on the situation. First of all, you should find out why this phenomenon arose, taking into account what, already take measures to eliminate the problem.

    Causes of jam

    Let’s figure out why it happens that the printer chews on the paper:

    • Poor quality or unsuitable paper. Most often, the paper itself, which may be of poor quality, old, mint, wrinkled, previously used, etc., becomes a prerequisite for jams. Due to improper storage (excess moisture in the room or heat), the sheets may stick together, which will lead to jams during the printing process. In addition, even if everything is in order with the paper, it may not be suitable for printing on a specific printer due to the inappropriate size or density.
    • Incorrect paper loading. Another reason that often provokes a problem. There may be too much paper loaded in the tray, on the contrary, very little or it was inserted crookedly.
    • Settings are incorrect. This factor often becomes a provoking paper jam. When printing non-standard document sizes or page types, it is important to reflect this in the print settings of the program used in order to convey information to the printing device and the set print parameters coincide with the real ones.
    • Ingress of a foreign object into the equipment mechanism. Often, foreign objects can get into the mechanism of the device, and which have nothing to do even close to the printer.
    • Opening a tray while printing may not only stop the process, but sometimes cause paper jams.
    • Wear and failure of device parts. The internal parts of the printer, directly involved in the process of work, wear out over time, which leads to consequences in the form of chewing sheets by the printer.
    • Incorrect refilling and assembly of the cartridge. Carelessness during refueling and when assembling the cartridge after refueling can provoke equipment breakdown.
    • Poor quality cartridges or incompatibility with the machine can also cause page jams and poor print quality.

    After removing the chewed sheets, it is imperative to figure out why the printer is chewing on paper, since the problem can be systematic and needs to be addressed.

    How to clear a paper jam in the printer

    This phenomenon can be one-time or is permanent and occurs for different reasons, so the actions to eliminate the trouble may also vary. In addition, the devices differ in design, which also affects the ways of solving the problem. If the printer has jammed the paper, you need to know what to do and how. Improper user action can aggravate the situation and lead to damage to device components, which can be expensive to replace.

    How to remove paper

    So, if the printer stops printing, and the paper is jammed in it, the first step is to try to turn off and then turn on the device again. In the event of a minor jam, the equipment can retrieve the letter itself. In case it doesn’t, here’s how to manually clear the paper jam in the printer:

    • Disconnect the printing device from the power source. This is a prerequisite to observe when paper is jammed in the printer before removing it from the machine. De-energize the equipment so that the process of retrieving the letter and its scraps is safe.
    • We remove tasks for the printer from the print queue. This can be done, for example, using the “Control Panel” in the “Devices and Printers” section. We select the Printer in use, press RMB on it and from the menu go to the option “View the print queue”, Delete the documents planned for printing.
    • We open the lid to gain access to the inner world of the device and estimate the scale of the disaster. Depending on the situation, we determine how to get out the jammed paper under specific circumstances.
    • If most of the sheet is at the beginning of the paper feed roller, remove against the direction of the rollers. Jammed paper from the printer must be removed carefully, without sudden movements, trying NOT to break the letter, so that small pieces do not get clogged inside the machine.
    • If the letter is already jammed at the exit, you can remove the jammed paper by pulling the edges in the direction of the rollers. In the case of a laser printer, you first need to remove the cartridge, blocking access to the pressure mechanism.
    • After removing the sheet, you need to find out if it is torn and if there are any scraps inside the device, and at the same time we see if there are Foreign objects. If there is a suspicion that some of the paper has remained in the printer, we inspect the rollers, carefully disassemble the equipment (remove the removable parts of the structure, the cartridge), find and remove the scrap. Then I put all the elements back in place.
    • Connect the device to the mains and watch the power indicators on the front panel of the device. Flashing red diode means that the problem is not solved. In this case, you should try to remove the cartridge and put it back in.

    Finding out the cause of the phenomenon

    This is NOT the end of the troubleshooting steps. It is very important to understand why the sheets are jammed in order not to face the same in the future. After assessing the scale of the problem and seeing exactly how the letter Jammed, you can understand how to proceed. Weighing in on what causes the problem, the printer chews paper at the entrance or exit:

    • In the first case, the paper itself is often responsible for the print jam. This may be its low quality, deformation, for example, curled, crumpled corners of SEPARATE sheets, a thick stack, due to which the device tightens several at once or touches the second letter already during printing, Foreign objects, etc.
    • The second option, when the printer chews the paper at the exit, is already more sad, but if we are NOT talking about a malfunction of the equipment, then you can cope with the problem on your own. It is necessary to check the correspondence of the paper size set in the settings and the actual one, and if an error is noticed, I correct it. Another prerequisite for trouble can be overheating, so when the equipment is working intensively, it is necessary to give the device time to rest. It is also NOT excluded that third-party objects got into the machine, which led to a paper jam. The mechanism needs to be checked and get rid of all accidental items that are not related to the design of the printer and the printing process.

    Extraction nuances in different printers

    Paper can be built up in any printer. As mentioned above, the printing technique is structurally different, hence the differences in the actions to eliminate the paper jam problem in different devices. Consider the features of retrieving a jammed letter depending on the type of equipment.

    Inkjet printers

    The design of this type of device is realized so that the rotating rollers are covered with a cartridge. If a sheet is jammed and you need to pull it out of the printer, you will have to remove the cartridge to gain access to the necessary elements.

    Before performing such manipulations, for safety reasons, be sure to turn off the power supply to the equipment. If the sheet could not be removed, and part of it is firmly chewed by the printer, and you have neither the experience nor the idea of ​​how to properly remove a serious paper jam, and besides, you do not understand the device well, it is better not to risk and DO NOT touch the equipment filling, entrusting the matter professional.

    However, some device manufacturers are introducing additional options into their printers in an effort to make life easier for users. For example, owners of HP inkjet printers can detect a special sensor that detects the position of the carriage at the beginning and end of the printing process. When a jam occurs and the printing process is interrupted, it is necessary to check the condition of the sensor, which could be clogged or damaged, which caused the printing to stop. To reanimate the Encoder strip sensor, it should be wiped with an alcohol-based cloth, previously removed from the printer by stuck letter.

    READ  Why does the printer print in yellow Canon

    Laser printers

    The above step-by-step instruction, describing step by step how to remove a jammed sheet, is also relevant for laser models of devices. over, in this case, everything is much simpler and there is an urgent need to disconnect and connect the power supply.

    An important condition for the successful removal of the sheet is accurate removal without sudden movements, jerks, which can damage the paper.

    Many models of modern laser printers are equipped with detailed instructions describing, including solutions for such a problem.

    How to continue printing after a paper jam

    When the jammed paper has been cleared, the printer can be turned on. The device may continue to print documents from the point where the process was stopped due to an auto product problem. Usually, the page that was damaged is also reprinted, then the printer will continue to print the documents further in order. This happens if the print queue has not been emptied. If you have cleared the list of files to be printed, then you need to restart the process by selecting the appropriate print options.

    When to contact a specialist

    If the problem is one-off or easily solvable on your own, there are serious reasons for concern and the need to contact a service center. If the above methods failed to eliminate the malfunction and sheet jams occur on a regular basis, then it is worth involving specialists. Some actions require professionalism, since incorrect execution of the procedure can lead to even more serious consequences. The following activities can be difficult tasks for an ordinary user:

    remove, jammed, paper, canon, printer
    • Clean the paper feed rollers if they become dirty. Speech is in manual cleanup, not a programmatic method. Even in such, as it seems at first glance, a simple matter has its own nuances, and non-observance of the conditions for completing the task can only aggravate the situation.
    • Replacement of worn rollers.
    • Eliminate the problem if the cartridge is not installed correctly. If you previously made a mistake with installing the cartridge and are now trying to correct the situation, it is better to bring the wizard to the rescue, since such actions can lead to deformation of the mechanisms, which provoked the paper jam problem.

    You do not need to perform any manipulations on disassembling and assembling the printer if you DO NOT have the appropriate skills and are NOT confident in your abilities. When performing such work, the fragile mechanism of the device can easily be damaged, so it is cheaper and easier to call a master or deliver the equipment to a service.

    What to do if a paper jam occurs in the printer

    Occasionally, when printing, a paper jam occurs inside the devices. In order not to compromise the integrity of the structure, you need to know how to get the jammed paper out of the printer.

    Printer paper

    Reasons for paper jams or jams:

    • The moisture content of the paper is higher than normal, it starts to stick together;
    • Excessive static stress or dryness on the pages when the sheets stick to each other;
    • Soft edges of the sheet, which are jammed by the transmission mechanisms;
    • Skewed paper when loading into the input tray due to substandard sizes or users ignoring the guide curtains;
    • Contamination of the pick-up rollers with office debris or low-quality paper;
    • Wear on rotating rollers due to prolonged use.

    Paper jam error

    How to pull out

    • The first step is to disconnect the printer from the power source. It may be necessary to touch the inside of the printing device. In this case, there is a risk of getting an electrical injury when you pull out the paper.
    • Some printers, such as the Xerox 3010, HP, or Laserjet 6L, will automatically reset to the receiving tray after being disconnected from the power. If this does not happen the first time, you can repeat the operation by turning the device on and off.
    • To gently pull a page out of a printer that has a similar function, for example, in HP, you need to Flip open the cover that covers the internal mechanisms and figure out how deep the stuck letter has penetrated.
    • If most of the page is at the beginning of the feed mechanism, then we will pull it out against the movement of the rollers. To do this, take the sheet to the left and right edges, simultaneously and gradually pull it out of the device.
    • If it turns out that the paper is jammed already at the exit from the press, then we will pull it out in the direction of travel. In some modifications of laser printers, such as Canon, it is necessary to take out the cartridge in order to facilitate access to the pressing elements of the mechanism.
    • After making sure you remove the jammed paper completely, plug in the power supply and check the ready-to-print indicators on the front of the printer. If they indicate the problem persists, remove and reinsert the ink cartridge.
    • If it was not possible to pull the paper out without damage, you will have to provide maximum access to the rotating rollers. You will need to remove all removable parts of the printer and cartridge. Using an additional light source, examine the inside of the mechanism and find where to clamp the torn piece of paper. With tweezers, grab the edge and pull while rotating the pressure roller. This must be done very carefully.

    Printer instructions

    Paper loading instructions

    In order NOT to rack your brains later on how to get the jammed paper out of the printer, you must first take care of the quality of the sheets selected for printing.

    DO NOT load into the receiving tray:

    • Wrinkled or torn paper;
    • Pages held together with paper clips or staples;
    • Sheets of unacceptable thickness;
    • Glued or electrified pages.

    For printing on printers, there is a special A4 paper of a certain quality and size. To prevent skewing or jamming of sheets, use it. DO NOT load thick reams of paper in the input trays, unless specified by your model.

    Paper is jammed in the HP printer

    These models of inkjet printers have special encoder strip sensor, which indicate the cartridge carriage its location at the beginning and end of the print time. If a mechanical paper jam is excluded, then, most likely, one of the sensors has worn out, and the device simply does not receive the “end of print” command. See the location of the sensors in the photo.

    In order for HP to continue working, you first need to remove the paper from the printer, and then lubricate the encoder strip sensor with an alcohol wipe. To do this, you do not need to disassemble the device, it is enough to provide access to the tape on the shaft along which the carriage walks. Globally this will not solve the problem, but it will prolong the printer’s operation for a while.

    Paper Jam in Canon Printer

    For laser models, this article already lists the steps that explain what to do if a paper jam occurs in the printer. In the case when sheets get stuck in the inkjet model, they can only be pulled out when the printheads are in the service position. To do this, unplug the device from the power outlet and turn it on again. The carriage automatically rises to the beginning of the timeline in the desired position.

    How to fix the situation

    Pulling jammed paper out of inkjet printers is always more difficult because the rotating rollers are difficult to access. Perform similar work with the device disconnected from the power supply. If you cannot remove the entire page, and inside there are torn pieces of paper that cannot be obtained on your own, then you need to contact the service center.

    Disassembling the printer yourself, unscrewing and removing parts of the mechanism, is not worth it. Do this kind of work.