How to replace a cartridge in a Canon printer

Replacing the cartridge in Canon printers

replace, cartridge, Canon, printer

It’s no secret that the amount of ink and toner is designed to print a certain number of pages. At the same time, every owner of a Canon printer inevitably faces the need to replace the cartridge or refill it. On the one hand, this procedure is quite simple. However, it is recommended that you first stock up on certain knowledge, which will help to avoid serious mistakes.

Replacement features

Naturally, the easiest option would be to contact a service center, whose specialists will quickly change Canon Pixma cartridges of any model. However, many users prefer to carry out such operations on their own in order to save money and time. In principle, we are talking about the simplest possible manipulations. In addition, now on the network you can find a sufficient number of detailed instructions.

At the same time, it will be useful to take care of the availability of basic knowledge regarding the design features of certain models of office equipment.

It is important to remember that mistakes made can damage both the paint tanks and the peripherals themselves.

On this basis, each step should be approached with appropriate attention and care. Otherwise, you may be faced with the need to carry out expensive repairs.

An equally important point is safety. This topic is especially relevant for laser printers and multifunctional devices. Please be aware that toner cartridge refills can be harmful to health if handled roughly.

How to change the cartridge correctly?

It has already been noted that the user can easily change cartridges in both inkjet and laser peripheral devices on his own. On the one hand, the aLGorithm of actions in the overwhelming majority of cases will be the same (standard). However, do not forget about the existence of certain general rules.

The sequence of steps does not depend on the specific model of printer or MFP. The determining factor is the type of equipment. Naturally, inkjet and laser printing devices have their own design features and require an appropriate approach to replacing consumables.

Installation

After the old consumable that needs to be replaced is removed from the device, and the new one from the package, all actions should be performed as quickly as possible. The aLGorithm in this case will look like this.

  • Completely remove all protective film.
  • Insert a new or serviced (refilled) cartridge into the printer. It is required to insert the reservoir all the way into the corresponding compartment of the carriage.
  • Raise the latch to the upper position until it clicks.
  • Close or replace the paper output tray cover.

After completing all manipulations, the movable module with cartridges will automatically be moved to the working position. In principle, the peripheral device will already be ready for further use. However, in some cases, additional manipulations may be required. And it’s about choosing a replacement paint tank. This uses the preinstalled software, and to select the correct cartridge, you need the following.

  • In the “Start” menu, open the “Control Panel” tab.
  • Go to “Devices and Printers”.
  • Find the Canon printer or multifunction device you are using in the list of devices.
  • Click on the corresponding icon with the right mouse button and go to the “Printing settings” section.
  • Open the “Maintenance” tab and select “Cartridge Settings”.
  • Mark the desired ink tank and confirm your actions by pressing the Ok button.

If in the process of searching for a printer or MFP the required model was not in the list, then it is worth reinstalling the drivers.

The final step will be a reboot of the equipment, after which you can safely proceed to printing text documents and images.

Retrieving old

At the initial stage, you need to remove an empty or faulty cartridge. This procedure includes several such simple manipulations.

  • Start equipment. In this case, it is not at all necessary to connect it to a PC or laptop.
  • Open or remove, depending on the model, the side cover and the paper tray behind it.
  • Start the movement of cartridges in automatic mode by opening the cover of the pallet. At the same time, it is important not to touch moving elements and, moreover, not to try to stop them.
  • To get the paint reservoir by pressing the holder, lower it until it clicks.
  • Remove the cartridge to be replaced from the compartment. Please be aware that ink may still remain in this bottle.

Removing the toner container in laser printers is even easier. However, you must remember about the harmfulness of the powder. Regardless of the type and model of the peripheral device, it is strongly recommended to replace the consumable as quickly as possible, without leaving the equipment for a long time without cartridges.

Preparing a new

Experienced users and technicians are advised to unpack the ink tanks and toner containers just before installing them. This is most important for laser printers and MFPs, whose elements are sensitive to light. In a situation with inkjet models, it is necessary to minimize the possibility of contact of foreign objects and hands with the working surface and nozzles of the cartridge.

Before installing the container, remove the protective tape by pulling on the small “tail”.

If a consumable is being replaced in a laser printer, then special attention is paid to caution, since the element to be replaced is rather fragile.

In a similar situation, we will talk about the following important points.

  • Do not touch the drum unit or the green (cyan) part of the cartridge itself.
  • The specified elements should be protected from direct light rays using paper or clean cloth.
  • Do not turn the toner container upside down.

It is strictly forbidden to use sharp objects when unpacking cartridges. In this case, it is recommended to first study the relevant manufacturer’s instructions. After removing the toner bottle for laser MFPs and printers from the box, shake it once. This removes lumps and distributes the powder evenly. Similar manipulations are carried out over a sheet of paper or oilcloth, with which it is worth pre-covering the workplace.

Despite the fact that the replacement of cartridges is carried out most often according to the standard scheme, many models have their own design features that should be taken into account. Based on this, it is strongly recommended to study the instructions of the manufacturers of both the equipment itself and the consumables for it. It is important to remember that failure to comply with the rules often leads to serious damage.

The list of the latter includes the following important points.

  • It is highly undesirable to operate a peripheral device without at least one cartridge. By the way, in the overwhelming majority of cases it will be impossible to do this due to hardware blocking.
  • Handle consumables outside the printer with extreme care. This applies, first of all, to contacts, microboards, print heads, chips, as well as nozzles, nozzles and photos.
  • In order to maximize the operational life of consumables, it is recommended to remove them only for replacement, which in itself prevents the contact surface from drying out.
  • All the above manipulations should be carried out with rubber gloves.

Among other things, it is worth paying attention to the main differences between replacing cartridges in Canon inkjet and laser devices.

These are the following key points.

  • The cartridges themselves differ in their dimensions and shapes.
  • In inkjet printers and MFPs, ink is used for printing, which is absorbed into the paper, and in laser printers, their functions are performed by a powder that changes its properties and structure under the action of a beam.
  • Many inkjet tanks are disposable.

Most of the time, you just need to pull the cartridge out to remove it. At the same time, the clips snap off themselves, freeing the paint reservoirs. If at this stage problems have arisen, then it is highly undesirable to make an effort. Some models may have additional hand-snap fasteners.

How to replace the cartridge in the Canon MP250 MFP, see below.

Monochrome Laser Printers

Probably the easiest way is to get a monochrome laser cartridge, it does not even require a network connection. The main thing here is to get to the very detail. For printers with a paper tray at the bottom, lift up the top cover (often made of translucent plastic) that receives the printed pages. Then open the second one that covers the internal mechanism of the device. This lid has a small notch (it can be located either on the left or on the right), under which your fingertips can easily be slipped.

Some Canon printer models, such as the LBP810, load paper from the top. In such a printer, the cartridge is usually placed behind a cover located on the front of the housing. It is necessary to pull it towards you and fold it down. The path is now clear and the cartridge can be easily pulled out by the handle.

It is also easy to return the part back, but if something does not work out, you should never use force. A bias is possible, and in order to avoid breakage, it is better to make a second attempt. When the cartridge is brought straight to the guides, it practically falls into its intended place. The final stage: press until a characteristic click, so that the contacts are in place.

Replacing the cartridge in Canon printers

There is enough ink or toner to print a certain number of pages, and then every printer owner is faced with the need to change or refill the cartridge. Therefore, you need to know how to change cartridges in a Canon printer. And although the design of different models of printing equipment differs from each other, individual units have much in common.

Drum cartridge

The unit is also called a copy cartridge. Although its resource is 7,000 pages, repair or replacement will still be required. When removing it, it is important not to touch the drum unit and contacts to avoid damaging them. Store the drum cartridge only in opaque packaging and should not be exposed to direct sunlight or strong light. To get the block, you need to sequentially do the following operations:

  • close the sub tray and open the printer cover;
  • remove the top of the multi-purpose tray and remove the paper;
  • open the front cover;
  • lift the levers on both sides to unlock;
  • pull out the drum cartridge by the handle.

Laser Color Printers

The location and design of the cartridges depends on the technology used in the particular device. For example, the Canon i-SENSYS LBP7110Cw printer uses a single-pass printing method and includes four separate print engines. The cartridges are located one after the other in a special tray. Their replacement is carried out as follows:

  • pull towards you and lower the cover on the front wall of the device;
  • pull the block out by the handle;
  • get out the cartridge that needs refilling;
  • install full.
READ  Printer For Printing Mfp Laser

Important: do not leave the cover open in the printer, remember that the drum unit may light up.

Toner cartridge

Canon i-SENSYS LBP7010C (7018C) color laser printers use multi-pass printing technology and, in addition to four blocks with toner, the design includes a drum cartridge, which is a drum with a cleaning system. If you open the top cover, you can access only the toner cartridges. In addition, only one of them is accessible, the rest are located in the depths of the device. Using the “Paper” button on the control panel. press and hold for 2 seconds. the printer is put into cartridge replacement mode. The Paper light is on and the toner light for the color ready to be replaced is blinking.

Once the button is pressed once again, the cartridges move and all lights flash. Do not open the printer cover at this time. When the transfer operation is complete, one of the lights keeps blinking to indicate which of the toner cartridges can be removed. So each of the blocks is sequentially transferred to an accessible position. Replacement is carried out in the same way and the cartridge of the color of the toner opposite to which the indicator is flashing is installed in place. To take the printer out of this mode, press and hold the “Paper” key again for 2 seconds. The video at the end of the article shows a visual instruction for removing toner cartridges from the Canon i-SENSYS LBP7010C printer.

Inkjet printing technology

Here you cannot do without turning on the device, since the cartridges are located in the parking area and are not available for removal. After pressing the ON button, you need to wait until the printer is ready for operation (indicator is on) and open the cover. The carriage moves to the cartridge replacement position.

It should be noted that Canon’s instruction manuals do not recommend turning off the printer. over, on the first pages of the user manual there is a warning that the power cord must not be disconnected while the power indicator is on or flashing. However, if you press the ON button now, the carriage will move back to the parking area. The only way to disconnect power from the printer is to unplug the power cord.

Cartridges may have latches that you need to push. Or the carriage has covers that must be lifted to replace the cartridge, just like the Canon PIXMA iP2700. If there is no lever, just pull the cartridge towards you and remove it from the slot. Reinstallation is carried out in the reverse order:

Gaining access to the holder

First, you need to access the holder. It is not difficult to do this, it is enough to perform several actions:

  • Plug in the power and turn on the device.
  • Close the paper output tray according to its design.
  • Open the back cover. Now wait for the holder to move to the state for replacing the cartridge. Do not touch it while moving.

If the cover is left open for more than ten minutes, the holder will snap into place. It will move back only after re-closing and opening the lid.

Removing the cartridge

During this step, you need to remove the ink tank, the holder of which is close to the rest of the device. It is important not to touch metal components or touch them with the cartridge. If paint gets on them, just gently remove the liquid with napkins. Removing the ink tank itself is as follows:

    Press down on the cartridge until you hear a click.

The mount may differ depending on the model and manufacturer of the printer. A design with a special holder is often found. In this case, you first need to open it, and then take out the container.

Each area has its own laws and regulations regarding the disposal of consumables. Dispose of the used cartridge accordingly, and then proceed to install a new one.

Replacing the cartridge in the printer

Each model of printing equipment from different manufacturers has its own design, and the method of fastening the container for ink is also different. Below we describe a general example of replacement, and you, taking into account the peculiarities of the technique used, repeat the instructions given.

Before performing this procedure with the following notes. Owners of FINE cartridges should pay particular attention to them, since they are the most vulnerable, and the mechanism has its own subtleties:

  • Never touch the electrical contacts or nozzles on the cartridge with your hands. They are easily distinguished from the base, so there should be no problems detecting them.
  • Do not operate the printer without a missing cartridge. Replace immediately.
  • After installing the container, do not take it back out unnecessarily, and even more so do not leave it open. Such actions provoke ink drying and equipment breakdown.

Now that you are familiar with the basic notes, you can proceed directly to replacing the ink tank.

Replacing the cartridge in the printer

Printer cartridges have a certain ink capacity, in addition, each model of equipment consumes a different amount of it. Over time, ink will run out, resulting in streaks on the finished paper, blurry images, or errors, and lights on the device itself. In this case, the cartridge should be replaced. How to do this will be discussed further.

Installing a new cartridge

All that remains is to insert a new ink tank and prepare the device for further printing. All actions are performed quite simply:

    Unpack the cartridge and remove the protective tape, otherwise ink will not flow into the printer.

At a slight angle, insert the container into the holder, while making sure that it does not touch the electrical contacts near the mount.

Press down on the body of the ink tank until you hear a characteristic click. Be sure to check that all components have been installed.

The last step is to close the lid.

This completes the cartridge replacement. We hope you managed to cope with the task without any special difficulties, and the printing device again produces high-quality documents and images.

Replacement

If ink runs out or other errors occur during printing, the Ink Lamp and Alarm lamp blink orange to indicate an error. Count the number of flashes of the indicator and take the necessary actions. If there was an error

Canon Pixma MG2540 Printer Cartridge Replacement

Replacement procedure

To replace, follow these steps.

Do not touch the electrical contacts (A) and printhead nozzles (B). The product may not print correctly if touched.

Replace it immediately after removal. Do not leave the device without it (sell printer cartridges, buyout, buyout is expensive, buy up printer cartridges, sell high, hand over, buyout is more expensive, buy up printer cartridges, buyout with expired dates, buyout with expired dates, buy expensive, buy wholesale a lot, sell new cartridges from printers).

Use a new one for replacement. Installing a used one may clog the nozzles.

In addition, with it, the device will not be able to provide correct information if replacement is needed.

After installation, do not remove it from the device and do not leave it reinstalled, the device will malfunction. Use up page within six months of first use to get the best print quality.

If you run out of ink, you can continue to print for a while with only black or color, which retains ink. However, this will result in lower print quality compared to printing with two. For optimum performance, it is recommended to use new ones. Even when printing with one type of ink, do not remove the blank. Missing color or black causes an error and stops printing in the device.

Color ink may be consumed even when printing a black and white document or choosing black and white printing.

Both color and black ink are also consumed during standard and deep cleaning of the print head, which may be necessary to keep the product operating. If it runs out of ink, replace it with a new one immediately.

Fold the Paper Output Tray and the Optional Paper Output Tray.

The holder moves to the replacement position.

Do not try to stop or move the holder by hand. Do not touch the holder until it comes to a complete stop.

The inside of the product may be stained with ink. When replacing, be careful not to get your hands or clothing dirty. Ink can be easily removed from the inside of the device using paper towels, etc. Do not touch metal or other internal parts of the device.

If the cover is left open for more than 10 minutes, the holder may move. The Alarm lamp will light up. In this case, close the cover and then open it again.

Extract empty. (1) Press it all the way down (you should hear a click).

Be careful when performing operations so as not to stain clothing or the surrounding area.

Dispose of empty in accordance with local laws and regulations for disposal of consumables.

(1) Take a new one out of the package and carefully remove the protective tape (C).

Shaking may cause ink to spill and stain your hands and the surrounding area. Handle with Care.

Caution: Ink on the removed seal may stain your hands and the surrounding area.

Do not touch electrical contacts or printhead nozzles. The product may not print correctly if touched.

(1) Insert a new one at an angle into the holder.

Color should be installed in the left slot and black in the right.

Install it carefully so that it does not touch the electrical contacts on the holder.

(2) Press down firmly until it locks.

If the Alarm lamp is on or flashing after closing the cover, take the appropriate action.

The device may make noise during operation.

Adjusting the position of the printheads.

During alignment, the product automatically cleans the printhead before printing a printhead alignment pattern. Do not perform any other operations until the machine has finished cleaning the print head.

Preparing a new cartridge

It is recommended to unpack new cartridges just before installing them inside the device, because prolonged contact with humid air or bright light should be avoided. In the case of containers for an inkjet printer, do not touch the bottom of the part, and before mounting it is necessary to get rid of the protective tape by pulling on the special tail.

As for laser devices, here it is necessary to follow slightly different rules, because the part is quite fragile and sensitive. We have highlighted several main points:

  • Do not touch the green or cyan portion of the cartridge, the drum unit, the front side, or any other area. Hold only the provided handle to avoid touching the indicated areas.
  • Keep the green surface and drum unit away from light sources and use a dry, clean cloth or sheet of paper for protection.
  • Do not turn the toner cartridge upside down.

When unpacking the cartridge box, do not use sharp objects to avoid damaging the part itself. Remove the device from the film or cardboard box only according to the specified instructions.

After removing the toner cartridge, it is recommended to shake it from side to side several times to get rid of any lumps of powder and distribute it evenly throughout the container. It is advisable to do this over a sheet of paper so as not to stain the surfaces with powder. If dry ink gets on the fabric, wipe it off with a dry cloth, never use hot water. this will cause the ink to set.

READ  Windows Does Not See The Printer What To Do

Replacing ink cartridges in Canon printers

Canon is one of the most renowned printer companies. Among all the models, there are several series and modifications, so any user will find the ideal option for their needs. Each owner of such a device is faced with the need to replace the cartridge, which is associated with the end of ink or breakdown. Today we would like to describe this procedure step by step, telling about all the subtleties and nuances.

Changing cartridges in Canon printers

Canon has two types of printers in its product list. inkjet and laser. As you know, they differ not only in their implementation of paint application and printing procedure, but also in the type of cartridges and inks used. For example, laser equipment supports printing only in black, and the ink itself is powder. At the same time, inkjet devices print in different colors and contain several cartridges with liquid ink inside. However, the replacement procedure is almost identical, this will be discussed further.

Removing the old cartridge

First of all, you need to get the used or broken cartridge out of the device. This is done quite simply. you just need to lift the top cover, pull out the ink tank, or pull the handle to remove the toner cartridge. Detailed guides on this topic using the example of laser and inkjet devices can be found in our separate material at the following link.

After removing the old part, it is recommended to clean the printer to prevent dirt and various hardware problems. To perform this action, follow the instructions, which you can read below.

Installing a new cartridge

As for the installation of new cartridges, there are some differences in inkjet and laser devices. Another article on our website is devoted to the mounting of individual containers, there is also a guide for the preliminary connection of the CISS. All the information you need can be found by clicking on the links below.

With laser printers, things are a little different. Here you should adhere to certain instructions, but it looks like this:

    After removing the cartridge, open the top cover of the printer and locate the corresponding slots to install the part.

Unfold the handle of the cartridge, and then carefully insert it into the slot, after making sure that the keys match.

Close the top cover of the equipment and prepare it for further printing.

Above, you have been introduced to all the important information about replacing the cartridge in Canon printers. All that is required of you is care, accuracy and the correct approach to the selection of new parts, because different cartridges, especially for laser models, are compatible only with certain printers.

When to change the cartridge?

To find out if ink is out or not, do not disassemble the ink unit. You just might mess it up.

There are several ways to check whether the container is empty or not:

  • Weigh your old and new ink containers on a scale; a significant difference in weight will indicate that the old ink is low on ink. But this method does not suit everyone.
  • Fuzzy print, faint print. In this case, most likely, the paint runs out. But here you need to keep in mind how often you use your technique. If on a daily basis, a faint print may be a sign that ink has run out. If you use it infrequently, the container may have dried out a little. It is necessary to run a few sheets empty, and if the print is still bad, then yes, the ink runs out.
  • In addition, in the program, technicians today often install a driver, this will allow you to find out the state of the ink, whether there are many or not enough.

So, you have figured out the problem, it remains only to solve it. In this topic, we’ll walk you through the general principles of replacing the ink unit. We will help you figure out how to change the container in different office equipment: HP Pro MFP M177fw, Canon, HP Deskjet 2520, HP Laserjet, Epson and others. It makes absolutely no difference whether you need to change the cartridge in a Canon printer or in an HP Pro MFP M177fw printer. The main thing is to know the general principles, and you can do it yourself.

Instructions on how to change the cartridge in the printer

How to change the cartridge in the printer? Why is this topic relevant? I remember that I had an unfortunate situation, which ultimately ended very well. My daughter was preparing for her graduation work at the academy, and it was necessary to print 60 sheets of her incredible works. What a disappointment overtook her when the seal was interrupted

Step one. find out the vehicle model

Look at the front of your printer, sometimes that’s enough. In extreme cases, there is a marking on the back, and in the passport you can specify the full name of the device. It is important to know exactly what model you have.

For example, you read: Canon PIXMA G2400 or Canon PIXMA MG2540S, each marking can be individual. Before replacing ink with Canon, you must make sure that this exactly matches the name of your device.

Dismantling and installation

Well, well, we figured out that:

Now let’s talk about what needs to be done to remove and reinstall the ink block, consider the general principles:

  • Unplug the equipment from the outlet.
  • Open the cover and press the clip. latch.
  • Take the cartridge by the handle and pull it out.

What did we pay attention to? Before installing a new one, you must first extract the old one, now in more detail:

  • The first thing you should do is to completely de-energize the printer. Thus, you will follow the safety precautions and you will be able to proceed with complete calm. It is recommended to wait a few minutes after switching off for everything to cool down a little, if it was in operation.
  • Second, we open the protective cover, this cover is everywhere. After that, you must carefully examine everything and find the latch-lock that holds the cartridge.
  • The third thing you need to do is flip off the locking latch. What is important here? When you snapped off the latch, you effortlessly pull out the part itself. If it is suddenly jammed, in no case apply great effort, by moving a little, you can easily remove it from the technique.

There are often exceptions to many rules. Sometimes the unit can only be removed when the printer is turned on. Therefore, we advise you about the Honor manual of your device. It is recommended to turn it off, so do it, be sure to turn it off from the network for your safety.

To install an ink block:

  • Remove the packaging from it.
  • Remove the protective film.
  • Pick up and shake the block to distribute the ink evenly.
  • Insert the container into the special grooves.

When you insert into the grooves, or it is also called a slide, do it very carefully.

Try to avoid distortions during installation. This can happen if you slide the right and left sides unevenly. Therefore, slide gently and evenly.

If it is skewed and difficult to install, pull it out and re-insert it carefully. In any case, do not make too much effort so as not to damage anything.

Install until you feel the latch actuation. This is usually a characteristic click. Then run a few test sheets. If the print is good, high quality, then you did everything right. Watch video and photos.

How to change the cartridge in all types of Canon printers

There is enough ink or toner to print a certain number of pages, and then every printer owner is faced with the need to change or refill the cartridge. Therefore, you need to be able to extract it and install it back. The design of different models of Canon printing equipment is different from each other, but individual units have much in common.

Monochrome Laser Printers

Probably the easiest way is to get a monochrome laser cartridge, it does not even require a network connection. The main thing here is to get to the very detail. For printers with a paper tray at the bottom, lift up the top cover (often made of translucent plastic) that receives the printed pages. Then open the second one that covers the internal mechanism of the device. This lid has a small notch (it can be located either on the left or on the right), under which your fingertips can easily be slipped.

Some Canon printer models, such as the LBP810, load paper from the top. In such a printer, the cartridge is usually placed behind a cover located on the front of the housing. It is necessary to pull it towards you and fold it down.

The path is now clear and the cartridge can be easily pulled out by the handle.

Important: It is also easy to return the part back, but if something does not work out, you should never use force.

A bias is possible, and in order to avoid breakage, it is better to make a second attempt. When the cartridge is brought straight to the guides, it practically falls into its intended place. The final stage: press until a characteristic click, so that the contacts are in place.

Drum cartridge

The unit is also called a copy cartridge. Although its resource is 7,000 pages, repair or replacement will still be required.

Important: When removing, do not touch the drum unit and contacts to avoid damaging them.

Store the drum cartridge only in opaque packaging and should not be exposed to direct sunlight or strong light. To get the block, you need to sequentially do the following operations:

  • close the sub tray and open the printer cover;
  • remove the top of the multi-purpose tray and remove the paper;
  • open the front cover;
  • lift the levers on both sides to unlock;
  • pull out the drum cartridge by the handle.

Toner cartridge

You will be able to pay 30-50% less for light, depending on what kind of electrical appliances you use.

Canon i-SENSYS LBP7010C (7018C) color laser printers use multi-pass printing technology and, in addition to four blocks with toner, the design includes a drum cartridge, which is a drum with a cleaning system. If you open the top cover, you can access only the toner cartridges. In addition, only one of them is accessible, the rest are located in the depths of the device. Using the “Paper” button on the control panel. press and hold for 2 seconds. the printer is put into cartridge replacement mode. The Paper light is on and the toner light for the color ready to be replaced is blinking.

Once the button is pressed once again, the cartridges move and all lights flash. Do not open the printer cover at this time. When the transfer operation is complete, one of the lights keeps blinking to indicate which of the toner cartridges can be removed. So each of the blocks is sequentially transferred to an accessible position. Replacement is carried out in the same way and the cartridge of the color of the toner opposite to which the indicator is flashing is installed in place. To take the printer out of this mode, press and hold the “Paper” key again for 2 seconds. The video at the end of the article shows a visual instruction for removing toner cartridges from the Canon i-SENSYS LBP7010C printer.

READ  How To Share A Printer

Laser Color Printers

The location and design of the cartridges depends on the technology used in the particular device. For example, the Canon i-SENSYS LBP7110Cw printer uses a single-pass printing method and includes four separate print engines. The cartridges are located one after the other in a special tray. Their replacement is carried out as follows:

  • pull towards you and lower the cover on the front wall of the device;
  • pull the block out by the handle;
  • get out the cartridge that needs refilling;
  • install full.

Important: do not leave the cover open in the printer, remember that the drum unit may light up.

Inkjet printing technology

Here you cannot do without turning on the device, since the cartridges are located in the parking area and are not available for removal. After pressing the ON button, you need to wait until the printer is ready for operation (indicator is on) and open the cover. The carriage moves to the cartridge replacement position.

It should be noted that Canon’s instruction manuals do not recommend turning off the printer. over, on the first pages of the user manual there is a warning that the power cord must not be disconnected while the power indicator is on or flashing. However, if you press the ON button now, the carriage will move back to the parking area. The only way to disconnect power from the printer is to unplug the power cord.

Cartridges may have latches that you need to push. Or the carriage has covers that secure the ink tanks in position and must be lifted. If there is no lever, just pull the cartridge towards you and remove it from the slot. Reinstallation is carried out in the reverse order:

Monochrome Laser Printers

Probably the easiest way is to get a monochrome laser cartridge, it does not even require a network connection. The main thing here is to get to the very detail. For printers with a paper tray at the bottom, lift up the top cover (often made of translucent plastic) that receives the printed pages. Then open the second one that covers the internal mechanism of the device. This lid has a small notch (it can be located either on the left or on the right), under which your fingertips can easily be slipped.

Some Canon printer models, such as the LBP810, load paper from the top. In such a printer, the cartridge is usually placed behind a cover located on the front of the housing. It is necessary to pull it towards you and fold it down. The path is now clear and the cartridge can be easily pulled out by the handle.

It is also easy to return the part back, but if something does not work out, you should never use force. A bias is possible, and in order to avoid breakage, it is better to make a second attempt. When the cartridge is brought straight to the guides, it practically falls into its intended place. The final stage: press until a characteristic click, so that the contacts are in place.

How to change cartridges in a Canon printer

Canon is one of the most renowned printer companies. Among all the models, there are several series and modifications, so any user will find the ideal option for their needs. Each owner of such a device is faced with the need to replace the cartridge, which is associated with the end of ink or breakdown. Today we would like to describe this procedure step by step, telling about all the subtleties and nuances.

Toner cartridge

Canon i-sensys LBP7010C control panel

Canon i-SENSYS LBP7010C (7018C) color laser printers use multi-pass printing technology and, in addition to four blocks with toner, the design includes a drum cartridge, which is a drum with a cleaning system. If you open the top cover, you can access only the toner cartridges. In addition, only one of them is accessible, the rest are located in the depths of the device. Using the “Paper” button on the control panel. press and hold for 2 seconds. the printer is put into cartridge replacement mode. The Paper light is on and the toner light for the color ready to be replaced is blinking.

Once the button is pressed once again, the cartridges move and all lights flash. Do not open the printer cover at this time. When the transfer operation is complete, one of the lights keeps blinking to indicate which of the toner cartridges can be removed. So each of the blocks is sequentially transferred to an accessible position. Replacement is carried out in the same way and the cartridge of the color of the toner opposite to which the indicator is flashing is installed in place. To take the printer out of this mode, press and hold the “Paper” key again for 2 seconds. The video at the end of the article shows a visual instruction for removing toner cartridges from the Canon i-SENSYS LBP7010C printer.

Installing a new cartridge

As for the installation of new cartridges, there are some differences in inkjet and laser devices. Another article on our website is devoted to the mounting of individual containers, there is also a guide for the preliminary connection of the CISS. All the information you need can be found by clicking on the links below.

With laser printers, things are a little different. Here you should adhere to certain instructions, but it looks like this:

    After removing the cartridge, open the top cover of the printer and locate the corresponding slots to install the part.

Unfold the handle of the cartridge, and then carefully insert it into the slot, after making sure that the keys match.

Close the top cover of the equipment and prepare it for further printing.

Above, you have been introduced to all the important information about replacing the cartridge in Canon printers. All that is required of you is care, accuracy and the correct approach to the selection of new parts, because different cartridges, especially for laser models, are compatible only with certain printers.

Thank the author, share the article on social networks.

There is enough ink or toner to print a certain number of pages, and then every printer owner is faced with the need to change or refill the cartridge. Therefore, you need to know how to change cartridges in a Canon printer. And although the design of different models of printing equipment differs from each other, individual units have much in common.

Preparing a new cartridge

It is recommended to unpack new cartridges just before installing them inside the device, because prolonged contact with humid air or bright light should be avoided. In the case of containers for an inkjet printer, do not touch the bottom of the part, and before mounting it is necessary to get rid of the protective tape by pulling on the special tail.

As for laser devices, here it is necessary to follow slightly different rules, because the part is quite fragile and sensitive. We have highlighted several main points:

  • Do not touch the green or cyan portion of the cartridge, the drum unit, the front side, or any other area. Hold only the provided handle to avoid touching the indicated areas.
  • Keep the green surface and drum unit away from light sources and use a dry, clean cloth or sheet of paper for protection.
  • Do not turn the toner cartridge upside down.

When unpacking the cartridge box, do not use sharp objects to avoid damaging the part itself. Remove the device from the film or cardboard box only according to the specified instructions.

After removing the toner cartridge, it is recommended to shake it from side to side several times to get rid of any lumps of powder and distribute it evenly throughout the container. It is advisable to do this over a sheet of paper so as not to stain the surfaces with powder. If dry ink gets on the fabric, wipe it off with a dry cloth, never use hot water. this will cause the ink to set.

Laser Color Printers

The location and design of the cartridges depends on the technology used in the particular device. For example, the Canon i-SENSYS LBP7110Cw printer uses a single-pass printing method and includes four separate print engines. The cartridges are located one after the other in a special tray. Their replacement is carried out as follows:

  • pull towards you and lower the cover on the front wall of the device;
  • pull the block out by the handle;
  • get out the cartridge that needs refilling;
  • install full.

Important: do not leave the cover open in the printer, remember that the drum unit may light up.

Drum cartridge

The unit is also called a copy cartridge. Although its resource is 7,000 pages, repair or replacement will still be required. When removing it, it is important not to touch the drum unit and contacts to avoid damaging them. Store the drum cartridge only in opaque packaging and should not be exposed to direct sunlight or strong light. To get the block, you need to sequentially do the following operations:

  • close the sub tray and open the printer cover;
  • remove the top of the multi-purpose tray and remove the paper;
  • open the front cover;
  • lift the levers on both sides to unlock;
  • pull out the drum cartridge by the handle.

Installing a new cartridge

As for the installation of new cartridges, there are some differences in inkjet and laser devices. Another article on our website is devoted to the mounting of individual containers, there is also a guide for the preliminary connection of the CISS. All the information you need can be found by clicking on the links below.

With laser printers, things are a little different. Here you should adhere to certain instructions, but it looks like this:

    After removing the cartridge, open the top cover of the printer and locate the corresponding slots to install the part.

Unfold the handle of the cartridge, and then carefully insert it into the slot, after making sure that the keys match.

Close the top cover of the equipment and prepare it for further printing.

Above, you have been introduced to all the important information about replacing the cartridge in Canon printers. All that is required of you is care, accuracy and the correct approach to the selection of new parts, because different cartridges, especially for laser models, are compatible only with certain printers.

Thank the author, share the article on social networks.

Canon is one of the most renowned printer companies. Among all the models, there are several series and modifications, so any user will find the ideal option for their needs. Each owner of such a device is faced with the need to replace the cartridge, which is associated with the end of ink or breakdown. Today we would like to describe this procedure step by step, telling about all the subtleties and nuances.

NNCXV.INFO 2021