How to replace a cartridge in an HP deskjet printer

How to Insert a Cartridge into an HP Printer: Removing the Old Block

Each printer model has its own characteristics. If we are talking about the manufacturer HP, then this device is one-piece. It is a monoblock, in which the parts of the units are in a sealed case.

replace, cartridge, deskjet, printer

To insert the cartridge into the HP printer, you must turn it off from the network. Then open the door. To do this, the button responsible for resetting the fixation is pressed, and the lid must be pulled towards you. After that, you will see the cartridge, which will automatically move to the center. This process is automatic. It is easy to extract it from the construction. It is enough to pull on yourself with your hand.

If it was not possible to get the old block in this way, then it is necessary to unlock it. It consists in the fact that the latch is pressed inward. After that, the thrust mechanism opens and the blue button is clamped. She is responsible for resetting the commit. You can find it on the side of the carriage.

Where to begin?

Installing a cartridge into a printer is a simple process. But before proceeding with its implementation, it is necessary to determine the model of the device, since it can be one-component and two-component. For each of them, the installation of the cartridge is carried out using different technologies.

In this case, it is worth considering the type of printer. There are monochrome and color laser. The process of replacing the cartridge is different for them.

After the features of the device have been determined, it is necessary to properly prepare the workplace. Since the procedure is rather messy, it is necessary to lay the table. You can use paper for this. Then you need to remove the old block. Then carefully dip it into the bag and close tightly. This can get your hands dirty. If so, shake them off and rinse immediately with cold water.

How to insert a cartridge into a printer of different brands

For those who have performed this procedure before, it is familiar and simple. But if you need to change the cartridge for the first time, then a lot of questions may arise. But don’t panic. Pull yourself together and calm down. The task is simple and anyone can do it. After performing it several times, you will feel like a professional who solves this problem quickly and efficiently.

READ  Phone Can't See Printer Via Wi-Fi

How to insert a cartridge into an HP printer: process features

After the old block is removed, you can proceed to the process of inserting a new one. The cartridge is in the box. You need to open it and get the contents. But it is better to do this just before installation is performed, as exposure to air will adversely affect the device.

Shake the new block lightly. This procedure is required. Since it could be stored for a long time. This leads to the fact that the fine powder, which is inside the block, cakes. Hold it horizontally and shake it 3-4 times.

The head, which is responsible for printing, is covered with a film. It’s on the bottom of the part. It is necessary to remove it carefully and carefully. In order not to get your hands dirty, grasp the colored label that is on the film.

The block must be placed in the place where the old cartridge was previously. Commit it. To do this, use a thrust mechanism or retainer. A click is a guarantee that the block is in place. In this process, you should not press hard and make sudden movements. This will damage the parts. The cartridge should slide smoothly over the stripes.

Notice where the old block was located. Insert a new one in the same way. It is strictly forbidden to install it upside down. After making sure you have followed the entire procedure correctly, close the printer door. Print this page if done correctly, but it will be of high quality.

HP Deskjet: model features

HP offers a wide range of printers. They differ in quality, functions and other characteristics. This is important to consider when doing any work with them.

To insert the cartridges correctly into the HP Deskjet printer, you will need to read the instructions for the device. It describes the process of replacing the cartridge in detail and is accessible.

Canon color printer: insert the cartridge

The color printer has a number of design features. So, a black-and-white device works using a photo drum, a container for black powder. When it comes to color printing, then one tone is not enough, several are required. For example, yellow, red, blue and others. They are located in sealed containers installed separately. Their location depends on the device model, as shown in the photo below.

This installation must be done correctly. This is helped by the indicator stickers that are on each unit. The same ones should be found in the installation slot. As a result, it will not be difficult to position the cartridges correctly.

It is important to note that not all units are replaced. They are spent in different ways. You can find out that the cartridge needs to be replaced by the indicator. Once the paint is over, it will automatically fire and start flashing.

READ  Which Printer To Choose For Home Use

This replacement procedure consists of the following work. First, open the door. After that, one container will appear in front of your eyes. To find the rest, you need to click a specific button. If there is no result immediately, then hold it for a few seconds. The rest of the replacement measures are similar to those described earlier.

There is one point that is important to be aware of. Only one unit can be replaced. If it is necessary to replace several, then the procedure is repeated anew from beginning to end. At the same time, it is worth checking each one for the quality of work. This will allow you to fix problems as soon as they arise. This way you will save time and effort.

An excellent assistant in this process is the cartridge installation video. As practice shows, it is better to see once than read several times. It is given below and contains a lot of useful information that will certainly be useful to you.

How to change the cartridge in an HP printer?

If you are interested in how to change a cartridge in an HP printer, first you need to find out what type of device you are talking about. So, matrix, inkjet and laser samples are distinguished. When working with each of them, its own principles are important. It is also important to consider the type of printing. color or black and white.

How to deal with laser equipment?

Brand toner is carefully selected for HP Deskjet printers. The design of the printing unit has a rectangle with rounded edges. If you decide to change cartridge in the HP printer, then you need to carefully remove the toner by pulling on the special handle. If during the procedure you get dirty with filler, then you can wash it off with water from your hands, and use a dry cloth or napkin for other surfaces.

The new part is released from the film. After that, the cartridges need to be shaken, and then installed in the tray. You cannot exert unnecessary pressure. Make sure that the part is in the right place.

Below is an interesting video of the article in the form of replacement instructions:

Replacing Ink Cartridges

Close the output tray extension, and then rotate the output tray clockwise to insert it into the printer.

b. Open the cartridge access door and wait for the carriage to move to the center of the printer.

in. Press down on the cartridge to release it, and then remove it from the slot.

b. Pull on the edge of the plastic tape and remove it.

Do not touch the electrical contacts on the cartridge. in. Insert the cartridge into the compartment until you hear a click.

d. Close the cartridge access door.

The printer software prompts you to align the cartridges if you try to print a document after installing a new cartridge cz637ae, cz638ae, f6t40ae.

READ  How to Disassemble Canon Mg2540s Printer

Pull out the output tray and tray extension.

Working with inkjet printing devices

In the HP Deskjet printer, cartridges are labeled with the ink color. To work with this device you need:

  • – remove the protective cover;
  • – carefully remove the cartridges;
  • – carry out the installation according to the instructions.

You will be able to pay 30-50% less for light, depending on what kind of electrical appliances you use.

The protective film is removed from the new part, which covers the outer contacts. When installing HP Deskjet cartridges, observe the sequence of colors, which is made according to the key, that is, an individual mounting system.

If refueling is necessary, a syringe is used for this, which is inserted into special holes. Then shake the HP cartridge. It is recommended to use only original parts, as analog parts often spoil the print quality.

How to change the cartridge in an HP printer?

If you are interested in how to change a cartridge in an HP printer, first you need to find out what type of device you are talking about. So, matrix, inkjet and laser samples are distinguished. When working with each of them, its own principles are important. It is also important to consider the type of printing. color or black and white.

Working with inkjet printing devices

In the HP Deskjet printer, cartridges are labeled with the ink color. To work with this device you need:

  • – remove the protective cover;
  • – carefully remove the cartridges;
  • – carry out the installation according to the instructions.

You will be able to pay 30-50% less for light, depending on what kind of electrical appliances you use.

The protective film is removed from the new part, which covers the outer contacts. When installing HP Deskjet cartridges, follow the color sequence, which is made by key, that is, an individual mounting system.

How to deal with laser equipment?

Brand toner is carefully selected for HP Deskjet printers. The design of the printing unit has a rectangle with rounded edges. If you decide to change cartridge in the HP printer, then you need to carefully remove the toner by pulling on the special handle. If during the procedure you get dirty with filler, then you can wash it off with water from your hands, and use a dry cloth or napkin for other surfaces.

The new part is released from the film. After that, the cartridges need to be shaken and then installed in the tray. You cannot exert unnecessary pressure. Make sure that the part is in the right place.

Below is an interesting video of the article in the form of replacement instructions:

NNCXV.INFO 2021