How to replace a cartridge in an HP printer

When to replace?

Sooner or later, each owner has to change cartridges in a printer and other devices. At first glance, such a procedure may seem rather complicated to an inexperienced user. However, in practice, it usually does not require significant time expenditures. Of course, there are a number of important nuances that should be taken into account by those who decide for the first time to independently replace the cartridge in an inkjet or laser device.

replace, cartridge, printer

Ink consumption is directly proportional to the frequency of use of the printer and multifunctional device. At the same time, the first signs that cartridges are to be replaced, as a rule, appear until the moment when the equipment refuses to function. Since the developers are reinsured, their creations suggest changing the ink or toner tanks in advance, despite the presence of a certain amount of ink. This approach is due to the elimination of the risk of sudden equipment failure.

Taking into account all the nuances of the operation of printing devices, it is worthwhile to change cartridges in a timely manner, including in a color laser printer, when a number of signs appear.

  • Print tone becomes less saturated and faded.
  • Not the entire page is printed clearly. Also, some characters may be “lost” and empty corners may appear.
  • Symbols or messages appear on the display of the device itself, signaling the need to change cartridges or replenish the ink supply. Most often, after this, the printer will continue to work, but at any time it may refuse to print.
  • The need to change consumables is also indicated by the appearance of light and sometimes white stripes on the pages. This feature is well known to the vast majority of users.

It is important to take into account that two types of cartridges are installed in modern printers and MFPs: chipped and not equipped with similar electronic elements.

The former are more technologically advanced, but more expensive. Their main advantages include the ability to monitor ink or toner levels and alert the user to replace them. As a rule, office equipment belonging to the budget price segment is equipped with unprinted cartridges. It should be noted that experienced users promptly and correctly respond to changes in print quality.


To install the cartridge, you will need to perform all the above steps in the reverse order. You will need:

  • make sure that the equipment is disconnected from the network;
  • check the cleanliness of the installed tank;
  • gently insert it into the compartment without making any efforts. if problems arise, it is better to try again;
  • snap the latches, making sure that the fasteners are secure;
  • replace the cover or close the tray;
  • connect the printer to the mains and activate it;
  • wait until the technician “sees” the new consumable and recognizes it, while the message about the need to replace the toner or the lack of ink should disappear.

It is important for Honor that in some situations problems may arise with the last point. We are talking about the use of non-original consumables.

One of the easiest ways out is to reset your printer or MFP. By the way, in the overwhelming majority of cases, the error message in question does not in any way affect the functioning of the equipment.

Preparing a new

After all the above manipulations are completed, attention should be paid to the new consumable.

First of all, you need to make sure that the purchased item is suitable for the serviced equipment.

Experienced users recommend buying exclusively original cartridges or cartridges compatible with specific models of office equipment. Today the market offers a fairly wide range of relevant products. In such a situation, problems with the choice of cartridges, as a rule, do not arise. The new paint reservoir must be unpacked prior to installation. When removing the shockproof packaging, it is important to avoid contact with the nozzles or drum unit. It is highly undesirable to touch these surfaces.

When preparing a new or serviced cartridge, care must be taken to protect the workplace, clothing and exposed parts of the body.

By the way, even new devices are not immune to ink release and toner spills. The next step is to remove the safety tape that protects the contacts and nozzles. In situations with laser printers and MFPs, it is recommended to rotate the new cartridge several times before installing it, keeping it in a horizontal position. This is to distribute the toner evenly in the container.

Possible problems

The most relevant features of servicing office equipment are due to differences in designs and principles of functioning of different models. That is why all manipulations associated with removing old and installing new consumables should be performed in strict accordance with the manufacturer’s instructions. However, users often find themselves in situations where the printer or MFP, after replacing ink tanks, does not work at all or does not print well.

In the event of problems, it is far from always necessary to immediately run to the service center. From some difficult situations it is quite possible to find a way out and on your own.

So, if an inkjet printer prints poorly or refuses to print at all after replacing the cartridge with a new one, then the reason may be incorrect installation. In addition, there may be problems with the supply of ink to the print head.

When servicing laser peripherals, it is worth paying attention to contacts. Malfunctioning laser shutters can also be source of problems. However, Honor should first of all make sure that no contact with the working surfaces is made when replacing a cartridge or toner. In some cases, poor printing and refusal to work are due to the fact that when installing the consumable, the shipping belts were not removed.

In addition to the already described problematic points that can be encountered when servicing inkjet and laser models of office equipment, it is worth paying attention to problems of a general nature.

  • Difficulties with the perception of new cartridges and print quality often arise due to the incorrect selection of a peripheral device when setting up a personal computer or laptop.
  • The source of problems can be failures that are directly related to the operating system. The most common symptom of a problem is the so-called freeze printing.
  • Among other things, specialized software, that is, printer drivers, becomes the source of all troubles. To fix the problem, you first need to open the appropriate tab in the “Device Manager” and make sure there are no exclamation marks. The presence of such symbols indicates the need to update or reinstall the software.

To cope with the listed problems is within the power of ordinary users with even minimal experience. But if you had to face more serious problems, then the most rational way out would be to contact the service center for professional help.

We take out the old

As soon as the office equipment has informed the user that the supply of ink or toner has dried up, it is necessary to restore its full functionality as quickly as possible. Naturally, this will require appropriate theoretical knowledge and practical skills. Inexperienced users are strongly advised to study the instructions at the preparatory stage.

At the stage of removing the used cartridge, certain actions must be taken.

  • It is strongly recommended to remove all jewelry (bracelets and rings) from the very beginning, which minimizes the risk of injury.
  • Disconnect the equipment from the mains.
  • Remove the cover of the device. This operation will not cause any difficulties, since this structural element can be picked up by a special tongue or groove. It is important to remember that the fuser can be hot on a laser printer and therefore remove the cover with extreme care. Most often, cartridges hold 2-4 clips in the form of clips that need to be folded back or snapped off.
  • After releasing the cartridge from the latches, pull it out by gently pulling on the plastic case. If it does not move from the seat, then it can be swayed a little from side to side.
  • As soon as you managed to remove the ink reservoir, it must be placed on paper or oilcloth, since ink or toner may be present on it. In this situation, it should be borne in mind that the paint is poorly washed.
READ  How To Install A Printer On A Computer

This scheme for different models of printing devices may have some differences. For example, in situations with inkjet MFPs, you will first need to flip open the scanner lid. When replacing the described elements of the design of laser devices, this item will be absent, since it will be enough just to move the tray and take out an empty cartridge. Some difficulties may arise when dismantling the ribbon on dot matrix printers.

Stages of replacing the cartridge

Each specific model of modern office equipment has its own design features. At the same time, the aLGorithm for replacing cartridges in printers and MFPs that print poorly looks standard. However, it is worth considering certain nuances at each of the provided stages.

All the necessary information is usually contained in the manufacturer’s instructions, which are included with the printer.

There are a number of differences in the process of replacing cartridges in inkjet and laser models of printers and multifunctional devices. And they consist, first of all, in the design and functional features of these two types of technology. For example, inkjet printers use pigment inks supplied through nozzles. Laser cartridges are filled with laser-fused toner powder. But regardless of the design features of equipment, including carriages, the replacement of cartridges is carried out in three main stages. When performing all the operations provided for by the instructions, you have to remove the non-working element, prepare a new or refilled one and install it in the printer.

Replacing the cartridge in the printer

All printer cartridges, regardless of the type of peripherals themselves, have a certain ink supply. Powder (toner) or ink will inevitably run out over time, and the user is faced with the need to restore the equipment to work. One way to solve the problem is to refuel. However, you should also consider the option of replacing the cartridge in a printer or MFP.

How to prepare for a replacement

A variety of models of laser and inkjet printers are on sale today, which have certain features of replacing toner for printing. Therefore, it is advisable, when preparing to change the cartridge, first to study the features of your technique and the recommendations of its manufacturer from Honor. In addition, it must be borne in mind that cartridges are of different types and associated installation nuances.

Installing a new one

To complete the replacement of the cartridge in the printer with a new one, you need to take it out of the box, and, without removing it from the plastic packaging, shake it a little. The fact is that the coloring matter can become stale, and its uneven distribution inside the container can subsequently negatively affect the print quality.

After shaking the case, unpack the product, carefully insert the consumable into the printer and fix it in place. It should be borne in mind that you also need to insert the product without sudden movements, taking into account the design of a particular model.

If you are inserting an original inkjet cartridge, you must first remove the protective tape from its body. This is a brightly colored ribbon that sits on the printhead.

If the printing device has a stop mechanism, then you need to make sure that the housing with the ink element was firmly inserted. This is usually evidenced by the characteristic click of the mechanism when it is pressed.

When to change the cartridge

Many users of office and home printing equipment are faced with the question of how often it is necessary to change the cartridge in the printer, and when it should be done.

The main sign of the end of the ink resource in the device is, first of all, poor print quality. White unprinted streaks appear on the sheet of paper, individual letters are lost, and the tone of printed characters becomes faded. These signs clearly indicate that you need to refuel or replace the cartridge in the printer.

In addition, modern printing technology often has a special notification option about the need to change or refill a cartridge in a printer. When there is a need to replace the toner again, the indicator on the display of the device lights up and a corresponding notification appears, that is, the printer itself writes that it is necessary to replace the cartridge.

Usually, after the replacement indicator is activated, you can still print on the printer for some time, which eliminates the possibility of an unexpected shutdown of the equipment due to lack of ink. Seeing the alert, the user can promptly replace the cartridge and prevent the complete consumption of toner.

In addition, the obligatory replacement of the cartridge is necessary when it is not possible to change the chip. Many modern printing devices have a special chip that reads the remaining resource of the consumable. And when this parameter reaches the minimum value, the chip for the cartridge blocks printing until a new product is installed.

Cartridge: types and features of replacement

There are two main types: cartridges with a chip and without a chip. In this case, it is unacceptable to replace one type of product with another. Otherwise, if you choose an unsuitable option, you may experience compatibility issues. Modifications with a chip are installed on more modern models of printers, and cartridges without a chip are usually used on the most budget versions of printing equipment or on outdated models.

Chipped products have a limited number of printed sheets. As this limit is used, the machine stops printing even if there is still enough toner left for printing. And such printers, for example, the popular Xerox or Samsung models equipped with a chip, will completely block the operation of the device when the limit value is reached. But the operation of printers of the Canon and HP brands does not depend on the chip.

Experts advise adhering to general recommendations when preparing to replace an old cartridge:

We take out the old cartridge

To retrieve the used toner bottle, in most cases you must first connect the printer to the network. Although there are models of printing devices where you can change consumables when the power is off. Next, to remove the cartridge from the MFP or printing device, follow these instructions:

  • Lift or slide towards you (depending on the design of a particular model) the cover of the device. Different printer models have different opening mechanism.
    This picture shows replacing inkjet printer cartridges.
    And in the picture below you can see how the toner in a laser printer changes.
  • Carefully remove the cartridge itself, given that each model of equipment may have its own design features. For example, you may first need to open the stop mechanism holding the printing element in place, or push the catch inward to release it. Depending on the modification of the printing device, there are other ways to get the consumable. For example, sometimes you need to hold down the reset button or pull the product up at an angle from the attachment point. Some models have a special handle that allows you to easily remove the cartridge from the device.
  • If the cartridge is stuck during manipulation, you do not need to use force or try to pull it out using various tools or devices. In the situation under consideration, when you cannot easily get the product, it is better to contact a specialized service center, which will make the necessary change of consumables without damaging the equipment.

Replacing the cartridge in the printer. detailed instructions

The printer today is an indispensable office equipment, so almost all users sooner or later face the question of replacing and refilling a cartridge in a printer. And the more actively the printer is used, the more often you have to change the cartridge in the printer.

Consider the instructions and all the stages of self-replacement of the cartridge in more detail.

Checking the cartridge after replacement

The final stage of replacement is checking the cartridge. In many modern models of printing devices, after closing the lid, the printer automatically detects that the consumable has been replaced and prompts you to print a test page. If the printer does not have this option, you need to print the sheet in the usual way.

If the print test showed that the printed page met all the required parameters, then the ink bottle replacement was successful. If on the test page you find gaps, stripes, then something went wrong. To fix the problem, you need to do a deep cleaning. Also, in some cases, it may be necessary to align the printheads. These manipulations with the equipment can be carried out using the control panel of the device and the manufacturer’s instructions.

After you have verified that everything is in order and the replacement of the consumable was successful, you can close the printer cover.

Thus, following all the above instructions, you will be able to figure out how to change the cartridge in the printer yourself.

The figure again shows the step-by-step diagram of replacing the cartridge.

If the replacement of consumables still causes you some difficulties or you do not want to waste your time studying the instructions, contact the specialists.

Step-by-step instructions on how to insert the cartridge into the device

There are two situations: change or refill print cassettes. One way or another, you will need to get them out of the printer, and then put them back in place. Consider this for several types of printing equipment.

READ  How to flush the epson inkjet printer head

How to install a filled container

You need to carefully take a full tank and place it where it was previously. Install until you click. The next step is to enable a “cleaning cycle”. getting good print quality. Then the equipment can be considered ready for operation. This way you can refill the cartridge yourself, saving time and money on going to the workshop.

HP, Canon, Samsung.

How do I insert an ink tank into an HP printer? The products of this brand are diverse, in connection with which discrepancies in the instructions may arise. You can refer to the example. the DeskJet series, on the basis of which the steps are repeated.

First of all, we install the paper (which is recommended by the guide). This requires:

  • open the cover, trays: for paper and receiving;
  • push back the upper fastener responsible for the width of the sheets;
  • load some A4 paper into the tray;
  • we fix the bundle of the width guide without effort.

Installation of the cartridge. It must match the hardware, or the printer will not detect it. We perform the following actions:

  • open the side panel (cover) where the holder is located;
  • press on the old inkwell, remove it, unpack the new one;
  • remove the protective film from the contacts and nozzle;
  • install the cartridge in place, hearing a click;
  • reinstall the rest of the ink tanks in the same way, if necessary;
  • close the side cover.

The final step is calibration and printing. The cartridges must be recognized by the hardware. To do this, we align the heads using the program:

  • connect the printing unit to the computer, turn it on (control panel. Start menu. Devices and Printers. HP Printing Preferences);
  • if the equipment is not displayed, add it to the list;
  • find the “Services” tab;
  • select the tool “Align cartridges”, start the process, following the instructions.

It remains only to reconnect the printer so that it can print.

Let’s move on to the Canon brand and look at the installation of ink tanks in this device. The principle is almost the same in all models, the containers are in the FINE format. Having purchased a new filled tank, we perform the following steps.

  • Removing the container. We turn on the power, start the printer. Then open the cover and paper tray, and then the cartridges will move to replace. We press on the holder, lowering it down until it clicks. We take out the capacity.
  • Immediately install the new ink tank by unpacking it without shaking it. We place it all the way into the back wall. Raise the locking lever until it clicks.
  • We close the lid of the tray. This will move the cartridge so that you can print.
  • If you need one color, we indicate this through the program. The path is as follows: Control Panel. “Start”. Devices and Printers. Canon. RMB. Printing Preferences. “Maintenance” (tab). “Cartridge Settings”. Next, select the inkwell and click “OK”.

Now reboot and start typing.

Let’s take a look at how the Samsung toner cartridge changes. The program informs about the need for this procedure. It is necessary to purchase an ink bottle corresponding to the model, shake it. Do not leave the container in the light, but hold it by the handle, without touching the working parts. We proceed to the replacement in the following steps.

  • Open the lid, take out the old container.
  • We release the new tank from the packaging, remove the protective tape.
  • Shake up to 6 times to distribute the toner inside.
  • We hold the inkwell by the handle, slowly insert, aligning the protrusions with the grooves of the printer. Clicking indicates correct location.
  • Close the lid securely.

Attention! If toner gets on your clothes, wash it off with cold water, otherwise the stains will adhere.

What you need to refill the cartridge

In order to fill an empty cartridge, you need to prepare:

  • cotton swabs;
  • rubber gloves;
  • cloth napkin;
  • refueling kit: syringe, ink.

We act in the following stages.

  • Open the hinged cover and carefully remove the empty cartridge according to the instructions for the printer.
  • Find the filling hole and immerse the syringe needle there, which responds by lightly touching the sponge located inside.
  • At a slow pace at intervals to allow the sponge to soak, refill the cartridge with ink.
  • When paint appears in the drainage hole, the syringe can be removed.

The holes are wiped with a cloth napkin. Place the cartridge on a flat surface (table) for about 5 minutes to settle.

Reinstallation specificity for different types of devices

Now many people have a printer, having turned into a household device. over, the printing equipment is capable of working on a wide variety of surfaces. The most common designs are inkjet printers. The reasons are the relatively low cost, the ability to print on various types of paper. Consider how cartridges are installed in laser and inkjet printing devices from various manufacturers.


The toner cartridge in the Brother printer is separated from the drum unit. To replace the container, you need to purchase an original (from the dealer) cassette that matches the model of the printing equipment. The device informs about the need to replace, the Toner indicator lights up. Open the cover, take out the drum unit and toner cartridge assembly. The first one is pulled towards themselves, after which they are lifted. By pressing the blue release lever, the reservoir is removed for subsequent disposal. Everything confiscated is placed on paper.

The insert is made in stages:

  • Unpack a new toner cartridge and keep away from light. It also needs to be shaken to distribute content.
  • Place a container in the drum unit without touching the gray areas. Fixation will occur on click. If everything is correct, the locking lever will rise.
  • The blue slider needs to be moved to clean the inner wire of the drum unit.
  • Before installing the drum in the device, put the blue slider in place.
  • At the end, close the front cover.

Now it remains to check the operation of the printing equipment.

How to insert the cartridge into the printer

Reinstalling the cartridge after refueling or buying a new one is a procedure that many users are forced to do on their own. This is not at all a difficult action, even a beginner can handle it. But inexperienced users have a number of questions about this. Consider how to properly change the cartridge in an inkjet or laser printing device.

Replacing a cartridge in a laser MFP

In laser MFPs, the toner hopper is usually hidden by a cover on the front of the device. Open it. In most cases, to remove the cartridge, it is enough to gently pull on the handle and remove it from the instrument body. Be careful, powder may spill out of it.

Open the package for a new cartridge. Usually it is a box made of thick cardboard, which contains a thick black bag. A laser printer cartridge is a rather complex device, which includes not only a hopper with toner, but also an imaging drum, a charge roller and a magnetic roller.

The drum unit is quite susceptible to damage and hardly protected by the casing, so be very careful when cutting the package to avoid scratching it. Replacement will be quite expensive. Also, keep it away from light and do not touch it with your hands.

After removing the cartridge from the bag, carefully remove all protective elements such as the heavy paper that protects the drum unit and the adhesive tape that secures the moving parts. If not removed, they can enter the printer path and damage the device.

Take the cartridge by the handle, shake gently and insert it into the device. The notches in the device and the tabs on the cartridge are designed to fit only in the correct position. Therefore, do not overdo it. If the cartridge fails to install, try turning it over. Insert it until it clicks into place, which should be indicated by a click and lack of free movement of the cartridge. Then close the lid tightly. If it does not snap into place, the device will not work.

An MFP is a multifunctional device that combines a copier, an optical scanner and a printer. Some models may also include a fax. Such devices are very popular. They save valuable office or home space. In addition, such a device will cost less than buying all the devices included in it separately.

MFPs are of two types. laser and inkjet. Devices of the first type use powdered toner for operation, which acts as a paint. Inkjet devices print with liquid ink.

Replacing cartridges in an inkjet MFP

Inkjet devices are commonly used at home. Replacing cartridges in them requires accuracy, because most of these devices have a rather fragile design.

To access the cartridges, you need to open the top cover, which should be fixed in the extreme position with a special stop. In this case, the device must be turned on. When the cover is opened, the carriage is automatically removed from the parking lot and drives out to a special platform. The cartridges are latched into the carriage or printhead. Bend back their tabs and carefully disassemble the ink tanks.

Open the packaging for new cartridges and remove them. The nozzles of the heads or openings of the ink hoppers are covered with a protective film that must be removed. Install the cartridges carefully according to the color coding. The carriage shape usually does not allow them to be installed upside down. A click will notify you of the success of the operation.

READ  Cartridge Cb435a For Which Printers

Close the cover. Further steps depend on the MFP model. Some models start preparing for work automatically, immediately after closing the lid. Others require you to press a button with a drop icon. Detailed instructions can be found in the user manual or on the manufacturer’s website.

Replacing ink cartridges in an HP printer

Before removing the cartridge from the printer, you must turn on the device and open its cover to gain access to the consumables inside it. The easiest way to deal with the cartridges that equip laser printers, because they represent one whole box with a gripping handle.

So, to answer the question of how to remove the cartridge from the printer, you should pull it by the handle. The direction will depend on the rails on the sides of the printer body. It should be removed carefully without any additional effort. Otherwise, pulling it out in the wrong direction could damage not only the consumable, but the device itself. In addition, it’s not a secret for anyone that plastic can be quite fragile.

Replacing the Laser Cartridge

To remove the laser cartridge, you need to open the printer cover. Under the cover, on the left, you will see a hole in which the lever is located. You need to click on it, then rotate the drum. Insert new toner into the empty space.

When you lift the cover, the print cartridge cradle automatically extends. Each paint reservoir has a latch on the side. If you need to remove the cartridge, pull the latch. To install new toner, just insert it into an empty slot, the latch should click.
Attention, the cartridge must be unpacked before you want to install it. Otherwise, after unpacking for a long time without using it, it will lose its resource. Placement of the cartridge in the drum should take place as soon as you remove the protective cover. Avoid touching shaded parts as this may affect print quality.

How to change cartridges in an HP printer?

Replacing a cartridge is a challenge every printer owner has to face. It may seem to inexperienced users that the procedure for replacing the cartridge is a responsible and difficult task, but once you get used to it, you will understand that this is not at all the case.

The main thing is not to make mistakes, do not rely on intuition alone and pull out the cartridge using brute force. Please read the instructions below in advance, then proceed. Additionally, you can use the instructions that are always included with the printer. If the instructions were lost, this article will help.

Replacing an ink cartridge

Then lift the cover of the scanning device and secure it with the special stop. Then open the paper receiving tray.

After that, you will find a compartment with cartridges. They can move while opening the lid. Wait for the cartridges to stop, but under no circumstances try to brake them or hold the latch yourself, otherwise you may damage the printer. Also, try not to touch the print head, otherwise you will have to seek help from the wizard.

In most printer models, ink cartridges are in a special fixing box that closes at the top. Open it and, pressing slightly on the front, lower the cartridge down and pull it out of the compartment. In the same way, if necessary, remove other cartridges. By the way, it is best to replace all the ink blocks at once, after which it will be necessary to align the printheads.

How to install the cartridge back?

The installation of the cartridge is carried out in the reverse order. Replacing the color cartridge is similar. After completing the installation of new cartridges, close the printer cover and run a test page. If it successfully prints, the replacement of cartridges can be considered complete.

Second step: preparing a new cartridge

At this stage, you will need to replace the old consumable with a new part. But before you insert the cartridge into the printer, make sure that it really fits your device. For example, if you have an HP printer, then you can replace a consumable in it with the same model or with a non-original one that is compatible with your printer model. In general, today the market offers a wide range of cheap compatible cartridges to choose from, and the choice between the original and the compatible is solely yours.

To solve the problem of how to insert the cartridge into the printer, first print out a new consumable. Inside the cartridge box, you will see a shockproof sealed package. You will need to open it and remove it from the cartridge, and then carefully remove it, without touching the contacts and the drum unit. Try to take care of the cleanliness beforehand, as even new toner cartridges for laser printers may spill toner. Next, remove the packing tape and the protective tape that is on the contacts. Rotate the new cartridge back and forth several times while keeping it horizontal. This will allow the toner located inside the reservoir to be distributed as evenly as possible.

How to replace the cartridge in the printer yourself?

Sooner or later, printer owners have to deal with such a problem as replacing the cartridge. But it should be noted right away that replacing a cartridge in a printer is not such a difficult and complex problem as it might seem to most. In addition, the instructions attached to each model of office equipment, whether it be a printer or MFP, provides detailed information on how to replace the cartridge in the printer. Please note that if you act in this case completely relying on your intuition, then this can lead to making mistakes that will certainly negatively affect the operation of your printer.

First step: remove the old cartridge

Before removing the cartridge from the printer, you must turn on the device and open its cover to gain access to the consumables inside it. The easiest way to deal with the cartridges that equip laser printers, because they represent one whole box with a gripping handle.

So, to answer the question of how to remove the cartridge from the printer, you should pull it by the handle. The direction will depend on the rails on the sides of the printer body. It should be removed carefully without any additional effort. Otherwise, pulling it out in the wrong direction could damage not only the consumable, but the device itself. In addition, it’s not a secret for anyone that plastic can be quite fragile.

In this case, the question is how to remove the cartridge? To get the consumable as accurately as possible, hold it exclusively by the handle and, if necessary, by the ends. Therefore, do not touch the drum unit or moving parts of the cartridge! In addition, it should be noted that toner residues may spill from such a consumable, which is a very corrosive and toxic substance. If you do get dirty, you can wash off the remaining toner from your skin with cold water and any suitable cleaning agent. At the same time, it is better to take off clothes and put them away for washing. Thus, now you have learned how to remove the cartridge from the printer.

Step three: install the cartridge

Next, we proceed to solving the problem of how to install the cartridge correctly and correctly. To do this, you just need to insert it, hitting the protrusions in the corresponding grooves. Do not make significant efforts in this case, because the consumable should be installed easily enough. Then push it into the device body until it stops. If something went wrong initially, be sure to remove the part and try again. Try to avoid distortions, otherwise the replaced cartridge will not completely snap into place. After that, you just have to close the printer cover and wait until the device goes into working state. Thus, the question of how to put the cartridge into the printer is solved quite simply.

Be sure to print test pages at the end to make sure the cartridge fits fully into your printer and is working properly. If the cartridge is not installed properly, you will have to reopen the cover and remove the consumable.

In addition to all of the above, it should be added that technically, replacing a cartridge in a printer intended for an inkjet model looks almost the same as in the case of a consumable for a laser device. But before removing the cartridge in this type of printer, pay attention to the presence of reservoirs. The fact is that solving the question of how to change a cartridge in an inkjet printer can be a little easier, because they only allow individual ink tanks to be replaced as they are consumed. In general, as you have probably seen, installing the cartridge into the printer is a fairly simple process that requires consistency and accuracy.