How to reset Samsung to factory settings

Hard reset Samsung Galaxy A5. reset settings, password, pattern

During use, any gadget “clogs up” and even superficial cleaning of the phone does not give any results. And at such moments there is no other option except how to hard reset the Samsung Galaxy A5 or whatever it is called in the Russian-speaking space. reset to factory settings. This will completely delete all information and reinstall the software.

And you will have a completely empty phone in your hands, as if it had just arrived from the factory. Therefore, it is worth worrying in advance about the safety of your dear data, which is located on the internal memory of the device. The built-in memory card will remain intact, you can transfer contacts to it, etc., the SIM card will also remain intact. As for the safety, you can also use the storage located on the Internet, their use is free, available to everyone. It is rational to use them not only when it is necessary to reset the data of the gadget, but also during daily use. Equipment at any time can fail and “get” what is stored on the internal memory of the smart can become an expensive task or completely impossible.

Hard reset Samsung Galaxy A5. way 1

The first option involves 5 steps, which will be discussed further:. in the menu of your smart, you need to find and go to the “Settings” directory;. this is where the “Backup, reset” element is located, which must be activated;. then you should pay attention to the line “Reset all data”;. “Reset device” should be pressed further;. the last step completing this action “Delete all”.

After performing all the above actions, you will have a device in your hands that requires your close attention, because Smart seemed to be born anew, you will have to configure it “from scratch”, but isn’t that what you achieved? The speed of response to requests is surprising, no freezes, brakes and other inconveniences.

Hard reset Samsung Galaxy A5. way 2

The second way may show a little more complicated, but in any case it is worth describing it in stages. Perhaps this is how you will be able to bring your phone back to life. It will suit you if you have forgotten the Galaxy A5 pattern or password, and also if your smartphone cannot boot First you need to connect the phone to the charger, charge it as much as possible and disconnect it not only from charging, but also turn it off altogether;. then you need to hold down several buttons at once, namely: “volume plus”, “Home” (located in the center on the front of the smart), as well as the “Power on” button;

Resetting the Samsung Galaxy A5 is definitely an extremely powerful method to clean your smartphone and bring it back to full life. But using this method is not recommended too often. Pay attention to the signs that your device gives you. With its glitches and slowdowns, it lets you know that there are problems somewhere that need to be fixed. Licensed software and high-quality antivirus software can protect your Smart and you will not need a reset.

Hard reset:

To factory reset Samsung J330F Galaxy J3 2017, follow these steps:

  • Turn on your smartphone.
  • Hold down the Power button for 2-3 seconds and select “Restart” on the screen.
  • As soon as you have chosen to reboot, immediately simultaneously hold down and hold the buttons: Volume up, Home (center), Power on.
  • Release the buttons after the screen lights up.
  • After 10 seconds, the phone will enter the recovery menu. If the robot’s logo hangs on the screen for a long time, then hold down Power on and, without releasing it, press Volume once Release the buttons.
  • Select the line “Wipe data / factory reset”. Control is carried out by the Volume buttons and the Power button to confirm the selection.
  • Select “Yes. delete all user data”.
  • The last action is reboot system now.
  • Wait for smartphone loading.

Factory reset Samsung J330F Galaxy J3 2017

It is important to remember or write down the data (login and password) to enter your google account. After resetting the settings, you will need them to synchronize your data (contacts, applications, etc.) with the phone and to access the phone.

The hard reset method helps you reset your pattern or digital password in case you forget it.

Your-mobila.ru

Factory reset Samsung J730F Galaxy J7 2017

It is important to remember or write down the data (login and password) to enter your google account. After resetting the settings, you will need them to synchronize your data (contacts, applications, etc.) with the phone and to access the phone.

How To Reset Samsung Galaxy A10. Hard Reset

The hard reset method helps you reset your pattern or digital password in case you forget it.

How to Factory Reset Samsung S8?

Everyone knows that the new flagships from Samsung are elegant, powerful modern devices. But, be that as it may, errors may occur in their work. In some cases, you will need a full factory reset.

How to factory reset Samsung S8?

Before figuring out how to reset Samsung S8, we will find out what such an operation provides and why it is actually necessary.

Factory reset. features

A full factory reset deletes all data on the device. Therefore, first copy all important information to your laptop, PC or removable media.

Also, data can be sent to the regular storage of the server of your choice. True, this method requires a sufficient amount of time and very fast Internet.

Before you reset the Samsung Galaxy S8 edge, remove the memory card from the device, otherwise all existing information will be erased on it during the procedure. Make sure your phone is at least 50-60% charged for a successful factory reset.

Now we will find out how to perform a hard reset in case of serious system problems, or for some reason you need to restore the device to its factory settings. Let’s consider several ways.

  • To reset Samsung s8 to factory settings, go to the “menu” (located on the main screen).
  • Click on “settings”, then “backup and reset” or “backup and reset”. After that. “data reset” and “device reset”. If the screen lock function is activated, you will need to enter a pin code or password and only then continue.
  • Click “delete all”. All data is erased, all settings are erased.
  • Smartphone reboots, done.

Reset using recovery

  • With this method, before resetting the Samsung Galaxy S8, first turn off the phone.
  • Now press the Power and home button, hold.
  • We are waiting for the Android System screen to appear, release the Volume Up, home, Volume Up buttons. ”E.
  • The device vibrates, now you can release the Power button.
  • Press Volume Down, select Wipe data / factory reset.
  • Press Power again, then Volume Down to highlight the Delete all user data option.
  • Click on Power again, select the option.
  • The device starts the reset process, upon completion of which we press Reboot system now.
  • It remains to reboot the system by pressing Power.

Reset using the dialer application

  • On the smartphone, open the dial pad (indicated by a green icon).
  • Enter the following combination. 27673855 #.
  • Performing a full factory reset, deleting personal data.
READ  How to Factory Reset iPhone 6

Now you know how to factory reset Samsung S8 when needed. Let me remind you that all data is deleted after that! Therefore, reset only if absolutely necessary.

After the procedure, the gadget looks like you just purchased it. I also note that these methods work for any Samsung Galaxy tablets and smartphones.

The video below shows both ways to run an automatic reinstallation of Windows 10 described in the article.

How to reset Windows 10 or auto reinstall OS

Learn how to reset Windows 10 to factory settings, reset, roll back, or otherwise automatically reinstall Windows 10 on a computer or laptop. This has become easier than in Windows 7 and even in 8, due to the fact that the way of storing the image for reset in the system has changed and in most cases you do not need a disk or flash drive in order to perform the described procedure. If for some reason everything described does not work, you can simply perform a clean install of Windows 10.

Resetting Windows 10 to its original state can come in handy in cases where the system began to malfunction or does not even start, and you cannot perform a recovery (on this topic: Restoring Windows 10) in another way. In this case, reinstalling the OS in this way is possible with the preservation of your personal files (but without saving programs). Also, at the end of the instructions, you will find a video in which the description is shown clearly. Note: A description of problems and errors when rolling back Windows 10 to its original state, as well as possible solutions, are described in the last section of this article.

Update: in the latest versions of Windows 10, additional methods of resetting the system have appeared, including removing all programs preinstalled by the manufacturer of the computer or laptop. Automatic clean installation of Windows 10, Restoring Windows 10 from the cloud.

Automatic clean install of Windows 10 using Refresh Windows Tool

In the latest versions of Windows 10, a new function has appeared in the recovery options. “New Start” (formerly called the Refresh Windows Tool), which allows you to perform an automatic clean installation or reinstallation of Windows 10 with the preservation of files, but with the removal of preinstalled programs from the manufacturer. Using it allows you to reset when the first method does not work and reports errors.

  • In the recovery options, at the bottom under Advanced recovery options, click on Learn how to start over from a clean install of Windows.
  • You will be prompted to go to the corresponding page in the Windows 10 Security Center, click Yes.
  • Click the Get Started button in the New Launch section.
  • Check out what exactly Start Over is and, if you agree, click Next.
  • Wait for the Windows 10 factory reset to complete.

At the end of the process (which can take a long time and depends on the performance of the computer, the selected parameters and the amount of personal data when saving), you will receive a completely reinstalled and functional Windows 10. After logging in, I recommend that you also press the WinR keys, type cleanmgr, press Enter, and then click on the “Clear system files” button.

When you clean up your hard drive, you will most likely be able to delete up to 20 GB of data left over from the system reinstallation process.

Reset Windows 10 in settings from the installed system

The easiest way to reset Windows 10 assumes that the system on your computer starts up. If so, then a few simple steps will allow you to perform an automatic reinstallation.

  • Go to Settings (via start and gear icon or WinI keys). Update and Security. Recovery.
  • In the Reset this computer section, click Get Started. Note: if during recovery you are informed that the necessary files are missing, use the method from the next section of this manual. Also, at this stage, an error may appear: Unable to find recovery environment.
  • You will be prompted to either keep your personal files or delete them. Select the option you want.
  • If you select the option to delete files, you will also be prompted to either “Just delete files” or “Completely clear the disk”. I recommend the first option unless you are giving your computer or laptop to someone else. The second option deletes files without the possibility of their recovery and takes longer.
  • In the Ready to Reset This Computer window, click Reset.

After that, the process of automatic reinstallation of the system will begin, the computer will reboot (possibly several times), and after the reset you will get clean Windows 10. If you selected “Keep personal files”, then the system disk will also contain the Windows.old folder containing the files old system (user folders and desktop content may come in handy there). Just in case: How to delete the Windows.old folder.

How to reset Windows 10 if the system won’t start or factory reset won’t work

In cases where Windows 10 does not start or a reset in the settings does not work, you can try using the manufacturer’s tools or with the recovery environment.

If Windows 10 does not start, but shows a blue screen with an error, then clicking on the “Advanced options” item, you can get into the recovery environment. If the system starts, but you cannot reset the OS, go to Settings. Update & Security and click the “Restart now” button in the “Special boot options” section.

After rebooting, go to the “Troubleshooting” section, and then click on the item “Reset the computer to its original state”.

Further, just like in the first described method, you can:

  • Keep or delete personal files. If you select “Delete”, you will also be prompted to either completely clean the disk without the possibility of their recovery, or simply delete. Usually (unless you are giving the laptop to someone), it is better to use a simple removal.
  • In the Select Target Operating System window, select Windows 10.
  • In the Reset this computer window, review what will be done. remove programs, reset settings to defaults, and automatically reinstall Windows 10 Click Reset.

After that, the process of resetting the system to its original state will begin, during which the computer may restart.

If your device was preinstalled with licensed Windows 10 upon purchase, then the easiest way to reset it to factory settings is to use certain keys when turning on your laptop or computer. For details on how to do this, see the article How to reset a laptop to factory settings (also suitable for branded PCs with a pre-installed OS).

Windows 10 factory reset errors

The first and simplest methods when you have problems resetting Windows 10 to factory settings consist of the following steps:

  • Make sure there is enough free space on the system disk partition (drive C). Ideally 10 GB or more.
  • Remove all third-party antiviruses and other protection programs before starting recovery.

If, when you try to reset Windows 10 after restarting, you see the message “Problem returning your PC to its original state. Changes not made ”, usually this indicates problems with files required for recovery (for example, if you did something with the WinSxS folder, from which files are being reset). You can try checking and restoring the integrity of Windows 10 system files, but more often you have to do a clean install of Windows 10 (however, you can also save personal data).

The second error option is that you are asked to insert a recovery disc or installation media. Then there was a solution with the Start over function described in the second section of this guide. Also in this situation, you can make a bootable USB flash drive with Windows 10 (on the current computer or on another, if this one does not start) or a Windows 10 recovery disk with system files included. And use it as your required storage device. Use a version of Windows 10 with the same bitness installed on your computer.

Another option in the case of a requirement to provide a drive with files is to register your own image for system recovery (for this, the OS must work, the actions are performed in it). I have not tested this method, but they write that it works (but only for the second case with an error):

  • You need to download the Windows 10 ISO image (the second method is in the instructions on the link).
  • Mount it and copy the install.wim file from the sources folder to the previously created ResetRecoveryImage folder on a separate partition or computer disk (not the system one).
  • In the command line as an administrator, use the command reagentc / setosimage / path “D: \ ResetRecoveryImage” / index 1 (here D acts as a separate section, you may have a different letter) to register the recovery image.
READ  How to turn on Smart Samsung without a remote

After that, try again to start the system reset to its original state. By the way, for the future, we can recommend making your own backup copy of Windows 10, which can greatly simplify the process of rolling back the OS to a previous state.

Well, if you still have questions about reinstalling Windows 10 or returning the system to its original state, ask. Let me also remind you that for preinstalled systems, there are usually additional ways to reset to factory settings provided by the manufacturer and described in the official instructions.

Distribution of new, sometimes interesting and useful materials from the remontka.pro website. No ads and free computer help for subscribers from the author. Other subscription methods (VK, Odnoklassniki, Telegram., YouTube, Yandex.Dzen)

Yes, the reset seems to be completed and Windows has already started loading, after the cycle.

And this cycle is never interrupted, for example by a blue screen with a button “additional parameters”? She could help with recovery. Well, and so, perhaps the fastest way without going into reasons to decide is to make a bootable USB flash drive with a 10 somewhere and put it cleanly (if there is important data, then you can do it without formatting).

Good day! Please tell me, if you reset to the factory ones for a licensed win 10, then the license will also be lost?

Good day! Is it possible with such a reinstallation to install Windows on another disk (SSD, currently on the HDD). I would be very grateful for your help

reset, samsung, factory, settings

Hello. No, this option will not work. Can be migrated to SSD. https://remontka.pro/Windows-10-to-SSD/

The system is working with errors, the parameters are not opened. How to reset a laptop to factory settings?

There is such an option: we download the Windows 10 installer from the official website microsoft.com/ru-ru/software-download/windows10 and there, after launching, we click “update this computer now” and in fact the reinstallation occurs.

Hello. I have such a problem, I reset my PC using your video instruction. Now I have removed the licensed Office. How can I restore it?

Hello. Just reinstall it: once the license, then the Microsoft account, in theory, will be restored. Well, or by key if the old version.

Hello, when you hold down Shift and restart the PC, there is no “Reset the computer to its original state” in the diagnostics

and in other sections? there, depending on the version, the items changed slightly

Hello! Dmitry, the last hope remains for you) The problem with installing Windows7 on the Lenovo IdeaCentre AIO 3 (2020) monoblock. Is it possible to do this? I install Windows 7 professional x64 on a “clean” (SSD drive. 110 GB). I made a bootable USB flash drive through Rufus (UEFI. GPT). Disabled Secure Boot. It goes through all the stages of installation quickly, but it hangs on “Starting Windows”! Resetting to factory settings. And again the same! Is this a verdict? or is there hope? Thank you. (Lenovo reported that the Legacy option has now been removed from the BIOS on devices from 2020)

Hello. Perhaps the reason is that your 7-ke does not have any drivers for the modern hardware of your candy bar. A possible solution is to try modern “assemblies”, where such nuances are taken into account.

Asus and Acer

Here, as well as on other devices, there is a standard option for entering the Recovery mode. Two buttons “Power” and “Volume down” are clamped simultaneously and remain in this state until the menu appears to restore the device’s performance. At the next stage, follow the algorithm suggested above.

Xiaomi and Meizu

To reset the settings on these devices, the use of two keys is also provided: “Power on” and “Volume up”. Release the first button as soon as the manufacturer’s logo appears.

Volume Down and Power buttons. Here you need to be careful: after the manufacturer’s logo is displayed on the screen, release both buttons for exactly 1 second, and then hold them down again and hold until the system prompts you to enter Recovery mode.

The manufacturer decided to provide a rather original solution to the problem. The device must be connected to the power supply and wait for the green indicator to light up. Find the hole with the recessed “Reset” key, and carefully press it with a special paper clip. Wait for the moment when the display lights up, and press the “Power” button several times in a row. After releasing it, go to the volume control carriage and also press it several times from the side of increasing the sound.

Via USSD request

An equally simple and quick way to restore factory settings on Android is the use of special digital combinations. The convenience lies in the fact that you do not need to obtain superuser rights or perform other complex manipulations. There are several service codes, among which you can select at least one suitable.

  • 27672878 #;
  • 27673855 #;
  • ###;
  • ###;
  • 938737381 #.

The first two codes are considered universal because they are suitable for the vast majority of Android devices. The last command is recommended for use in ZTE smartphones.

Via Google Find My Device

Apart from the traditional methods of performing a factory reset on Android devices, there is a rather unusual option. It provides for the use of the familiar to many special function “Find Smartphone”, developed by Google. Correct operation of the service is possible if two important conditions are met:

  • the device must be connected to the Internet;
  • you must be signed in to your Google account on your smartphone or tablet.

To use this method, you must:

  • Go to the manufacturer’s website and log in to the website https://myaccount.google.com/find-your-phone?pli=1;
  • Find the device using the built-in tools;
  • Select the “Erase data” option and start the cleaning process;
  • Confirm the intention again by pressing the button of the same name “Clear”.

As soon as the location is determined, a corresponding notification will appear on the smartphone or tablet.

reset, samsung, factory, settings

What are factory settings and why reset them on Android?

The internal memory of Android is divided into separate segments, each of which performs a specific set of tasks. For example, one part is responsible for system files, the other is responsible for storing and processing data, the third is for temporary files, logs, etc. A factory reset is the removal of user data and programs, while the system registries remain intact. Technically speaking, this process involves formatting specific memory segments. At the same time, it is important to understand that in case of a failure in the operating system or after an unsuccessful flashing, restoring the normal performance of the smartphone, a rollback to the factory state will not help.

Samsung

On the devices of this South Korean brand, it will be enough to hold down the “Power” and “Volume Up” keys. When the phone starts vibrating, release the first button and keep holding the second button. When the list of options appears, go to the next step.

Via the Android menu

The easiest and most accessible way even for inexperienced users to return the device to the pre-sale state is to reset the settings using the corresponding function built into the system. This option is relevant if the problems are not critical and the user has not lost access to menu items. In this case, you will need to do the following:

  • Open the “Settings” section in any convenient way (through the menu, quick access panel, desktop);
  • Go to the “Recovery and reset” tab;
  • Scrolling down the screen, select the “Reset settings” option (depending on the device model, the name may differ);
  • The system will issue a warning that during the operation, all user data: personal information, applications and programs, settings, will be deleted;
  • Confirm smartphone cleaning by pressing the “Reset all” button.

After completing the process, the device will match the appearance it had at the time of purchase.

The functionality of devices with the specified versions of the operating system has undergone some changes. Therefore, the “Reset settings” option can be found in the “Reset” tab, which is now in the “System” section.

A feature of the product of Chinese developers is the Flame OS operating system. Accordingly, resetting the settings on this platform is different than on Android. To perform the operation, you need to go to “Settings” → “About phone” → “Memory” → “Reset settings”.

Before reset

Back up Android so that all settings, contacts and other data are in the cloud. And in the future, you could return them. Photos can be downloaded to SD card or computer.

READ  How to put a photo on a Samsung call

Sign out of your Google and Samsung account if you don’t want to use them anymore on this device, for example. before selling. We examined in detail how to do this in the article. how to delete a Samsung account from the phone. Open settings. accounts and unlink everything.

Method. via Recovery

Disconnect your smartphone / tablet. press and hold the power button until a menu appears where you need to select the shutdown item.

Press and hold two keys on the device body. volume up and power up. If there is a home button, then hold it down as well.

As soon as an inscription appears with the name of the smartphone, release the power key. The rest of the keys should be released as soon as the Recovery menu appears.

You can navigate through the menu items using both the touch screen and the volume buttons. Select “wipe data / factory reset” by going down to it and pressing the power button. Confirm that you want to reset everything.

Go to “Reboot system now”, press the power button and agree to reboot. Smartphone will boot completely reset.

Interesting! We also considered this method in the material. how to unlock a Samsung phone if you forgot your password. It is great in cases where a smartphone or tablet cannot even be opened at all.

How to reset Samsung to factory settings

You can reset the settings on a Samsung phone or tablet in several simple ways, which we will look at today in the illustrated instructions.

This procedure often helps out when the device malfunctions, brakes, or other errors. It does not harm the system and “resets” the device to its initial state.

The previous post was about how to enable T9 on Samsung. In this article, we will look at the Samsung hard reset process, i.e. how to reset a Samsung phone or tablet to factory settings as easy and fast as possible.

Interesting! Always Hard Reset Samsung devices before selling or if you want to give your device to someone for a long time. This is necessary to protect your data. so that it does not fall into the wrong hands.

Reset Samsung to Factory Settings

Method. through the menu

Open your phone settings and go to General Settings. Here we need the item “Reset”, it can also be called “Archiving and Reset” or other variations. Click on it.

reset, samsung, factory, settings

Next, select the item to reset data / device. Confirm that you want to delete everything and the erasing process will begin. The device will be booted to zero.

These were the easiest ways to do it. Through the Recovery menu, you can even reset a locked device, this method is more flexible, use it if it does not work through the menu.

Reset with buttons

Forgot your unlock password or your device just won’t turn on? Then you can use another method. using the Recovery menu. Moving between items in it is carried out on the volume rocker, and the choice of an option is on the power button.

  • When the device is turned off, you need to hold down the volume up, power and Home buttons.
  • When the logo appears on the display, release the power key.
  • Wait for the Recovery menu to load.
  • Select the item “Wipe data / factory reset”.
  • Then. “Yes”.
  • Select the item “Reboot system now”.
  • The device will reboot and the data will be erased.

Reset via settings menu

The easiest method is through the menu of the device. This will require:

  • Go to settings.
  • Select “General settings”.
  • Then “Reset”.
  • Open the section “Data reset”.
  • Click on the “Reset” button.
  • The device will reboot and the data and settings will be deleted.

What is a data reset and why is it needed?

Not only Galaxy, but all Android smartphones have a full reset. When this function is activated, the device is rolled back to the factory settings. You get the phone completely “clean” out of the box.

Important! When this option is activated, all user data is deleted. These are applications, files, contacts, correspondence, system settings, additional components, etc.

  • Transfer all important files from phone to flash drive.
  • Make a backup. It will allow you to restore information, save the user a lot of time.
  • Go to settings and delete your Google account. Otherwise, the smartphone will ask you to log in to this account after turning on.

Why would you need a hard reset and factory reset? Let’s list the common reasons:

  • There are problems with your phone. If they cannot be solved by standard means, then it is recommended to perform a full reset. It is not uncommon for a system rollback to factory defaults to help users.
  • You are about to implement an old device, or give it to someone else. Naturally, it is better to erase a huge amount of personal information so that third-party people do not get access to it.
  • Before or after OS upgrade. The developers recommend performing a “clean” installation so that errors from the old version of the operating system do not migrate to the new one.

How to Factory Reset Samsung? Consider the main ways to rollback the system on devices from a Korean manufacturer.

How to reset Samsung?

There are several ways to reset the system:

  • Via OS menu.
  • Through Recovery.
  • Using the service code.

How to reset Samsung to factory settings

How to factory reset Samsung? On Galaxy tablets and smartphones, you can easily complete this procedure. After reading our material, you will learn about possible methods for Hard Reset and receive instructions.

Through code

How to factory reset Samsung? The latter method is used much less often. using the service code. Need to:

  • Launch the system application “Phone”.
  • Open dialer.
  • Enter code 27673855 #.
  • The device will reboot and the user information will be deleted.

Possible problems

Have you used Hard Reset to get rid of problems with your device? If rolling back the settings did not help fix the problems, then you can try flashing. Additionally, you need to seek help from specialists at an authorized service center.

Does the device freeze and slow down after a reset? You must also contact the service center. You may need to perform an OS update so that the owner can continue to use the device.

If the device asks for a password from a Google account. then you need to enter it. Forgot your credentials? Then they need to be restored through the official website. https: // accounts. google. com / signin / v2 / recoveryidentifier source = esir flowName = GlifWebSignIn flowEntry = ServiceLogin. If you do not remember your username and password. then you need to contact an authorized service center. providing documents. confirming the purchase of the device.

Samsung Galaxy J7 HARD RESET

Factory reset on Samsung

Section: For beginners Date: 08/16/2018 Author: Alexander Moiseenko. Комментарии и мнения владельцев: 0

Do you have a Samsung smartphone and decide to sell or give it away for use? Or is the phone system clogged up so much that the usual optimization does not work? In this case, it is worth resetting the settings to the factory state. What is it when you need to reset and detailed instructions for resetting the settings on Samsung, we will consider in detail in this material.

How to Factory Reset Samsung: 2 Ways

  • From the recovery menu.
  • From the system settings menu.

Reset from the recovery menu, performed before the operating system boots, which is important when the device does not start or does not allow entering the settings.

Clearing out of system preferences is easier, making it easy for any novice user to handle. In this case, you should get to the corresponding section, which requires a working operating system.

Instructions for resetting settings from the recovery menu

As a result, you will receive the phone in the same condition as immediately after purchase. All data will be deleted.

What is a factory reset

Factory reset refers to the process by which the smartphone returns to its original state, as after leaving the assembly line or immediately after purchase. Installed apps and other user information on the internal storage will be erased. In this article

NNCXV.INFO 2021