How to scan a document with a Samsung printer

Models capable of copying and scanning documents

In order to photocopy one copy of a passport or scan an important document onto a computer, it is not at all necessary to run to the nearest kiosk with a sign “photocopy-printout”; it is enough to have a modern device at hand that can copy information. To date, quite a few models support this feature. The printer has long ceased to be a device with limited functionality only for printing. A modern MFP is not only the printer itself, but also a scanner and a copier.

scan, document, Samsung, printer

Most copiers, including both inkjet and laser printers, can transfer scanned information to a computer. To find out if the device has a scanner and copier, it is best to look at its characteristics. However, sometimes it is enough to superficially examine the corpus. If there is a cover on the top of the device with a glass surface under it, then this device has the above functions. The printer, as a rule, is equipped with only the tray-receiving of blank paper and prints it vertically upwards, while in the MFP the printed product comes out from the end, below the scanner area.

Scanning Options in Text or Photo Mode

Despite the fact that the drivers for all manufacturers differ and do not have one universal scheme, there are a number of basic settings that are present in all devices without exception.

The first thing worth mentioning is DPI. When working with text, this item should not be in a value below 300 (the same with a printer or MFP). The higher it is, the more accurate the picture will be. With a high DPI value, scanning will take a little longer, but the text is more likely to be readable, you will not have to resort to recognizing it. The optimal value is 300-400 DPI.

The second thing to look out for is color saturation (chroma). There are only three options here: the option to scan black and white text, gray and color (magazines, documents, posters, etc.). The higher the color, the longer the scan time will be.

In the photo mode, the most important thing is to avoid blurring the picture, and also to make sure that all the edges lie flat on the surface. Color and tone are set in the Preview settings before starting the scanning process from the printer.

It should be noted that not only the scanning process itself is important for digitizing a photo, but also the process of post-processing of the finished material using specialized programs.

To scan a photo, it is advisable to use the maximum clarity settings, this will minimize possible inaccuracies during the process itself, although it will take 10-15 seconds more.

Preparation for work

So, in order to use the scanner, you need to follow a few simple steps.

Once the driver installation process is complete, the device is recognized by your operating system. It can always be found in the appropriate section (printers and faxes, etc.). Usually the name of the device is the complete designation of its model, including the alphabetic and numeric index. If desired, the name can be changed to any other through the system settings.

After the process of installing drivers and synchronizing the device with the system, you need to decide what software you will use. The Windows family offers programs built into them by default, but this is far from the only solution. In any case, it is important to understand that you cannot do without a specialized program that will be responsible for the scanning process.

What to do if the device does not scan

There are not many reasons why this is happening.

  • The program is not responding. Everything is simple here, we reboot the device and wait for the system to boot. If the task is repeated, then turn it off for at least 60 seconds, then turn it on.
  • Mistake. If an error is made in the operation of your scanner, then you should eliminate it, having previously learned its code. In order to find out the error code, it is necessary to make diagnostics, which are different for each model. It is important to remember that the scanner can work in service mode, however, such an MFP will not be able to scan and xer, at least until the error is eliminated. For Canon scanners, to activate this mode, you need to press the reset button five times.
  • Your device is currently performing another assigned task. The MFP may be waiting for a copy to be queued to print just when you need to scan something. To do this, simply complete the current task and start a new one.
  • The scanner driver has crashed. If the above methods do not help, try reinstalling the scanner driver, it may be the cause.
  • Cord connection problem. Unplug the cord from the PC and the scanner, then plug it back in, in some cases this may solve the problem.
  • The general device driver (for both the printer and the scanner) may have become corrupted. In this case, you should reinstall all software. The easiest way to find it is on the manufacturer’s website.
  • We reset the settings. If none of the above helps, you can try to revive the device by resetting to factory settings. This is done in the OS menu, by clicking on the corresponding item “reset settings”, or in hardware (see instructions).

Before taking the device to the service, try connecting it to another PC, installing drivers and scanning something. If it does not work out, then the breakdown is possibly serious, and it is difficult to eliminate it with improvised means.

How to properly scan and photocopy on a printer

Printer and scanner are fairly common office equipment. The need for them is extremely great, because it is necessary to copy a document or send information from a printer to a PC almost every day, especially when it comes to document flow. In this article, we will learn how to use the additional useful functions of the printer and scanner. we will learn how to optimally photocopy and scan documents.

How to scan documents to PC

When a scanner or a printing device equipped with a scanning function is connected to a PC / laptop, the user can digitize the necessary documents, photographs. The scanning procedure is performed in one of the following ways:

  • through the system application “Scanner Wizard”, which is available in the operating system of the computer;
  • using third-party programs;
  • through the standard Paint utility.

A prerequisite for the successful creation of electronic copies of printed pages is the presence of an installed driver on the computer for the connected scanning device. Before starting the process, it is necessary to check the glass surface of the device under the cover. If you find dust, small debris or streaks, you should eliminate the shortcomings. After turning on the scanner, you need to make sure it is active, place the storage medium with the printed side against the glass and lower the lid.

When the necessary preparation has been completed, you can use the selected method of performing the operation. Scanning with the Wizard is the basic option.

  • Click “Start” on the computer screen.
  • Find the “Fax and Scan” utility in the list of standard Windows 10 tools and run it. In Windows 7 and 8, you should look for the required utility by going to the tabs of the menu “Start” → “Control Panel” → “Hardware and Sound” → “Devices and Printers”. Next, you should activate the shortcut of the connected MFP / scanner and start the “Scan document or image” wizard.
  • In the wizard window that opens, you need to configure the operation parameters: black and white, color scanning, brightness, resolution, path for saving the result, etc. Here in the preview you can see how the scanned document will look like.
  • Activate the process by clicking on the “Scan” button, upon completion of the scan, save the result to the PC memory (“Save” button).

Using third-party scanning software

Third-party scanning software is interesting for users by expanding the functionality: text recognition, converting from one format to another, the ability to send an electronic image by mail, fax, etc. The use of any such application implies that it has been installed on a computer. To launch the program, use a shortcut located on the desktop or in the Start menu.

READ  How to replace a cartridge in a brother printer

Before starting to use third-party software, it is recommended to read the user manual.

After starting the program, the necessary settings are made in the program window that opens, after which you can start scanning, as well as use other functionality.

  • ScanLite app. The product has a simple, concise interface. User settings are minimal: you need to specify a file name and folder to save the scan result. The scan operation starts when the corresponding button is pressed.
  • ABBYY FineReader. A program that allows you to transfer a printed document into electronic format and recognize text for subsequent editing. Paid software, an introductory test period is provided.

How to scan documents using an Android phone

“Scanning” documents and photos on your phone is a useful feature. Fortunately, there are very easy ways to scan documents.

Of course, a dedicated scanner will still be better if you often need to scan a large number of documents, but using your phone as a scanner will also work if you only need to scan a few documents. Here’s what we recommend for Android.

Best Way to Scan Documents on Android: Google Drive

If you are using an Android device, the best way to scan documents is the Google Drive app, which is installed on almost every Android device.

You can scan documents directly from Google Drive by clicking the “” button in the lower right corner of the home screen.

Select “Scan” from the pop-up menu.

It can ask for permission to access the phone’s camera. Click “Allow”.

When you are ready to scan your document, position the document so that it fills the entire screen as much as possible and press the blue button. You can also use flash by clicking the flash icon next to the capture button if your device has a flash. If your device does not have a flash, this option will not appear.

After scanning the document, a preview appears immediately. Don’t worry if most of your document gets cut off when you preview it. Click on the corresponding icon to select the area you want to save.

Touch, hold and drag the dots to change the area that is being scanned.

When finished, click on the checkmark in the lower right corner of the screen.

You have three options right after scanning:

  • Click the plus sign to add more pages to your document.
  • To repeat the scan, tap the circular arrow in the middle.
  • Click the checkmark icon to complete and upload the document to Google Drive.

You can also make minor adjustments after scanning. For example, clicking on the palette in the upper right corner will allow you to change the selection of the scan color and bring it to a specific type of document. By default, the scanner automatically selects the one it thinks is the best.

Finally, the three dots in the upper right corner will allow you to delete, rename and rotate the scanned document if necessary.

Scanned documents are added to Google Drive in PDF format, and names are added along with the word “Scanned” followed by the date and time. You can move, rename or delete any of the scanned documents by clicking on the three dots next to the file name.

You can also share your scanned documents from this menu by clicking “”. This will link to the document in Google Drive, and Send a Copy allows you to share the file via email, send it to Dropbox, and more.

Then you convert this scanned PDF into a document, which can then be edited or exported to Microsoft Word.

Disassembly instructions for MFP Samsung SCX-4200/4220

Let’s start disassembling. Tip: when removing the parts of the MFP one by one, lay them out on the table neatly, do not throw everything in a heap. then it will be easier to figure out what to put back.

Unscrew four self-tapping screws on the back of the MFP.

Disconnect the wire, remove the back cover.

Remove the side covers. The upper latches are released first, then the lower ones.

Start removing the side covers, it is better with these latches. shown in the photo below.

Disconnect the wire from the sensor from the left cover.

We remove the scanner unit. Before removing the unit, disconnect the shiny ribbon and two wires coming from the scanner.

The scanner unit is not fixed in any way (i.e. not screwed on with self-tapping screws), we remove it by first lifting the front edge, then the rear.

Now we unscrew the four self-tapping screws and remove the top cover.

Remove the fusing unit (“fuser”, “stove”). Disconnect two wires coming from the stove.

We unscrew the four self-tapping screws. The top two are not immediately visible, you need to look.

The fuser can now be removed. It can be easily removed, gently pull it towards you. Be careful not to break the tab in the middle of the stove on a part on the main board. If your task was to gain access to the stove, the disassembly can be completed, if not, we continue.

Next, remove the laser unit. We unscrew one self-tapping screw and remove the plug.

Unscrew the four self-tapping screws holding the LSU.

Disconnect the two wiring harnesses going to the laser unit. We handle the laser unit very carefully. since this is the “heart” of the device, we do not throw, we don’t give birth, we don’t touch the glass with dirty hands.

If you need to repair a long warm-up and / or double vision / triple print. remove the transfer (circled in green below in the photo) a roller to replace or clean it.

Let me remind you that you need to clean it as follows: rinse it thoroughly under running water (it can be a little warm, not hot) with soap, wash the toner and soap out of it with high quality, put it in a warm (not hot) place to dry for about a day.

If the device has the following symptoms: a long warm-up when turned on or before printing with a prolonged idle time, ghosting / tripping of the image when printing, sometimes there is also a faint print, you should refer to the recommendations from the article “Faint printing and long warm-up in printers and MFPs Samsung and Xerox “. The photo below shows the transfer roller or, as it is also called, the transfer shaft.

If the machine stops picking up paper, the problem is either in the pick-up roller or in the development of the seat of the roller axle sleeve. If the pickup roller is worn out, you need to either clean it or replace it. You can clean it with alcohol acetone. I dilute sirt and acetone in a ratio of 3: 1, respectively, and carefully wipe the rubber with this solution, as if trying to loosen it. it helps for a while if there is no new roller at hand.

If cleaning / replacing the pickup roller does not help, the seat of the roller axle bushing may be to blame. But more on that later.

We remove the capture roller. Turn the device upside down, disconnect the wire coming from the fan.

Unscrew ten self-tapping screws (sometimes less, I came across machines after a mountain of repairmen who left 4-5 self-tapping screws here).

Unscrew two more self-tapping screws and carefully lift and slide the bottom cover towards you (if the device is located as in the picture below).

Unscrew the six self-tapping screws from the side that hold the gearbox. Don’t lose the green wire with terminals.

Disconnect the wire. The gearbox often needs cleaning and lubrication. Inspect the gears. if toner has adhered to them, clean it. I use a cheap stiff bristled toothbrush for this.

Unscrew the three self-tapping screws. Remove the protective cover.

Pay attention to the location of the moving and stationary parts of the gear (circled in green). Take her off.

Further, shifting the entire axis to the left, remove the capture roller.

Now about the renovation. The feed roller is rotating, no paper is fed. You can hear it by the sounds. the video several times tries to grab the sheet, but it doesn’t suffice and the device freezes. Replacing or reading the capture roller is ineffective. This is most often due to wear on the roller axle bushing seat:

It is treated as follows: A metal plate of suitable thickness is glued to the worn out place. Before gluing, it is necessary to process the edges of the plate from burrs, otherwise there will be a rapid wear of the axle sleeve. For these purposes I use a worn out dispensing blade from the same SCX-4200. and the thickness is suitable and the blade lasts for a long time :-).

We clean or change the gripper roller, if necessary, we repair the seat of the gripper roller axis bushing.

Assembly is done in reverse order.

How to Configure Samsung Scx 4200 Scanner

Scan to Samsung SCX-4200 Scan to Samsung SmarThru The Samsung SmarThru software is included with your machine. SmarThru makes it easy to

Setting up printing with the Samsung SCX-4200 printer in Calculate

When installing calculate cups, it is installed by default and this is correct because it is easy to connect a printer but

READ  How to print to a printer via a phone

The Scan menu bar provides the following options.

Scanning an image and saving the result in a graphics application such as Paint or Adobe Photoshop.

Scan an image and send it by e-mail. Ability to scan an image, preview it and send it by email.

Note. To send an image by email, you need to have an email client such as Outlook Express installed with your email account.

Scanning an image and saving the results in a folder. Allows you to scan an image, preview and save the image in the desired folder.

Image scanning and text recognition. Allows you to scan an image, preview it, and send it to an OCR program.

Recommended scan settings for OCR:

Scan an image, preview and publish the resulting data on a website as a file of a predetermined format.

Configuring Basic Scan Functions. Allows you to configure the settings for the Application, Email, OCR and Website functions.

6 SmarThru 4 opens the window for the selected function. Adjust scan settings.

7 Click the Scan button to start scanning.

If you want to cancel the scan job, press the Cancel button.

information about SmarThru can be obtained by clicking the button in the upper right corner of the window. The SmarThru Help window will open, allowing you to view the onscreen help supported by the SmarThru program.

Constructive execution

The Samsung SCX-4200 has the gray-rectangular aesthetics of other printers from the manufacturer. This multifunctional device is 40.8 cm wide, 36.3 cm deep and 23.1 cm high, which is compact enough for an MFP with a laser printer.

Under the cover you can find an A4 scanner with hinges to accommodate thick originals.

Tray volume is standard, although not expandable. The capacity of the loading cassette Samsung SCX-4200 instruction is limited to 250 sheets. It can be adjusted to fit Legal, although in this configuration it will stick out from the back of the printer. Manual feed with adjustable guides allows single sheets to be inserted. The main foldable output slot can hold up to 50 sheets. There is an opening at the back of the printer that allows the paper to pass straight through. To activate the pass-through mode, simply open the cover on the rear panel; if it is closed, prints will automatically go to the main output tray. There is no auto-duplex option, so double-sided printing is a manual operation.

The printer control panel contains only a few buttons: Menu, Left, Right, OK and Back to navigate, Copies to change the number of copies, Stop / Reset and Start. Two-line LCD allows menu items to be seen, but there is no backlight, so it will be difficult to read in low light.

In the Samsung SCX-4200, you can replace the drum toner cartridge by folding the front cover down. The printer is sold with a starter cartridge that is rated for a thousand pages, but can print approximately 3,000 pages after replacement. The MFP has a toner save mode that saves on material. This saves money, but affects print quality.

Setting up your printer is easy. All you need to do is use the supplied CD-ROM to install the software and drivers, and connect the MFP to your PC when instructed. The Samsung SCX-4200 printer has only a USB port, but the manufacturer also produces an additional network adapter.

Functionality

The Samsung SCX-4200 is best used as a basic business MFP. The lack of a fax is its only significant drawback. When copying, you can perform standard operations such as changing the number of copies (up to 99), magnification (50-200%), contrast and type of original.

In addition, special copy features include:

  • Auto Fit mode, in which the image is enlarged or reduced to fit the paper size;
  • ID Card Copy. two sides of the original sheet are printed on one (the user will be prompted to turn the original over to complete scanning);
  • 2-up copying. similar to the previous option, placing two images on one page, reducing them in half;
  • printing posters when the original is enlarged to fit on nine 3×3 pages.

Driver Installation in Windows 7

To synchronize the printer with your computer, you need to download the software from our website. There are links above where you can download the necessary files for installation. After downloading the files, open the installer, do not change the system folder. Click “Next”.

In the next window, the user will be asked to select a language for the subsequent installation of the driver. Choose a language and click “Next”.

The next step in the installation is to select the required components. Ordinary users are advised to select the Typical installation type. In this case, all system components will be installed by default. advanced users can install system components at will. After we press “Next”.

To continue the installation process, you need to connect the printer to your computer via a USB cable. Pop-up Windows of the Installation Wizard may appear on your computer, which you just need to close. When the computer detects the connected printer (beeps) press “Next”.

The program will offer to register the printer, but this procedure is optional. Click “Finish”.

This completes the software installation. You can try to print.

The Samsung SCX-4200 is a surprisingly inexpensive monochrome laser printer that can also be used as a scanner and copier. The only feature that’s missing is fax, although this omission can be bypassed by switching to scanning and emailing files. The cost of the MFP is so low that it will be difficult to find other similar printers at this price. Compared to the more expensive models of competitors Dell and Lexmark, the SCX-4200 looks good. Fast, excellent print speed makes it ideal for home or small office environments with low workloads and a tight budget.

How to scan to a Samsung scx 4200 printer

5 Scan the document and save the resulting image.

Follow the program instructions to scan the image. Refer to the user manual of this application.

The process of scanning documents from the MFP Samsung scx 4200, scx 3400 and other models

Open the cover of the device and attach our document over the platen glass. The document should be facing the glass. After closing the lid, activate the program that we talked about and click on the image that says “Scanning”.

An additional panel is formed near the application window, where the menu offers various options and scanning options.

For example, by selecting the “Application” item, the source scanned by us will be automatically sent to some program.

By selecting the “E-mail” item, the scanned image by us will be immediately sent to the email specified in advance.

By selecting the “Folder” section, the scanned files will be saved on your PC or laptop.

The folder “Recognition” implies automatic sending of the scanned document to the OCR program.

Having decided on this item, you will also need to set the color settings of the scanned file and in what format it will be, and then just press the “scan” button.

There are many different methods and applications for scanning. We recommend using the application from the official manufacturer of your MFP for full operation.

You can ask a question to the masters from our service center by calling by phone or by writing your question on the feedback form.

You might also be interested in

What is VueScan?

VueScan is an application for scanning documents, photos, movies and slides on Windows, macOS and Linux. VueScan supports over 6,000 scanners from 42 manufacturers, even if there is no manufacturer driver.

If you are having trouble connecting your scanner to your computer or want to use the scanner software with most of the features, VueScan is your tool.

Scanning documents

Whether you need to scan a single page or a 100-page book, VueScan has tools to help you.

Scanning with flatbed and automatic document feeders (ADF)

Scan photos

Do you have boxes of photos in the drawer? Use VueScan to get them on your computer and off the to-do list.

Scanning with flatbed and automatic document feeders (ADF)

Scan multiple photos on a tablet

Samsung SCX-4200 user manual online. page 75

Samsung SCX-4200 manual for multifunctional device (MFP) contains pages in Russian.

You can download the pdf file of this instruction: Download PDF

Image scan, preview and
publication of the obtained data on the website as a file
given format.

Configuring Basic Scan Functions. Allows
configure the settings of the functions Application, Electronic
Mail, Recognition and Website.

SmarThru 4 opens the window for the selected function. Customize
scan parameters.

Click the Scan button to start scanning.

If you want to cancel a scan job,

For more information about the SmarThru program, see,
pressing the button

in the upper right corner of the window. A window will open

SmarThru Help, where you can view the on-screen
help supported by the SmarThru program.

Scanning using
software,
supporting TWAIN interface

Applications must be used to scan,
TWAIN compatible, such as Adobe Photoshop.
Before using the scanner for the first time in the application settings
specify device as TWAIN source.

The scanning process consists of several stages.

Check that the device and computer are correct
connected to each other and turned on.

Load documents into the ADF (duplex
ADF) face up.
Or
Place the document face down on the document glass
side down.

READ  How to make color printing on a printer

Open an application (like PhotoDeluxe or Photoshop).

Open the TWAIN window and set scan options.

Scan the document and save the resulting image.

To scan an image, follow

the instructions of the program. Refer to the user manual

Scanning using
picture download drivers
Windows (WIA)

The device supports the Windows Picture Download Driver (WIA)
to scan images. WIA is a standard component
Microsoft

XP designed to work with digital

cameras and scanners. Unlike the TWAIN driver, the driver
WIA allows you to scan and work with an image without
using additional applications.

The WIA driver only works under control

Windows XP / Vista / 7 and USB only.

Load documents into the ADF (duplex
ADF) face up.
Or
Place the document face down on the document glass
side down.

From the Start menu, select Settings, Panel
Controls & Scanners & Cameras.

Double click the icon for your printer. The wizard will start
scanners and cameras.

Select scan options and click
View to see how the changes were made
reflected in the image.

Enter a name for the file, select its format and location,
where to save it.

Follow the instructions on the screen to edit
the image after copying it to the computer.

Load documents into the ADF (duplex
ADF) face up.
Or
Place the document face down on the document glass
side down.

→ Control panel → Hardware and

Select Scan a Document or Picture.
The Windows Fax and Scan application will open.

Press the button to display the list of scanners.

Using Samsung SmarThru

To start scanning with SmarThru, follow these steps.

1 Make sure your device and computer are properly connected and turned on.

2 Place a photo or page on the document glass or ADF.

3 After installing the Samsung software, the SmarThru 4 icon will appear on the desktop. Double click the SmarThru 4 icon.

Allows you to scan images and save them to an application or folder, send by email or publish to a website.

The function of editing an image saved as a graphic file and then transferring it to a selected application or folder, sending it by e-mail or publishing it on a website.

Copy function with professional quality. Creates black and white or color copies of images (if the device supports this mode) and configures copy settings.

Print function of previously saved images. Provides printing in black and white or color images (if the device supports this mode). Get better quality prints with genuine d4200a cartridges.

Allows you to fax images or files saved on your computer. This feature is available when the machine supports fax functions.

4 Click the Scan button. The menu bar Scan will appear in the SmarThru window.

The Scan menu bar provides the following options.

Scanning an image and saving the result in a graphics application such as Paint or Adobe Photoshop.

Scan an image and send it by e-mail. Ability to scan an image, preview it and send it by email.

Note. To send an image by email, you need to have an email client such as Outlook Express installed with your email account.

Scanning an image and saving the results in a folder. Allows you to scan an image, preview and save the image in the desired folder.

Image scanning and text recognition. Allows you to scan an image, preview it, and send it to an OCR program.

Recommended scan settings for OCR:

Scan an image, preview and publish the resulting data on a website as a file of a predetermined format.

Configuring Basic Scan Functions. Allows you to configure the settings for the Application, Email, OCR and Website functions.

6 SmarThru 4 opens the window for the selected function. Adjust scan settings.

7 Click the Scan button to start scanning.

If you want to cancel the scan job, press the Cancel button.

information about SmarThru can be obtained by clicking the button in the upper right corner of the window. The SmarThru Help window will open, allowing you to view the onscreen help supported by the SmarThru program.

Add a comment

Leave your question through the feedback form and the master will call you back and answer without imposing any services.

Using Samsung SmarThru

To start scanning with SmarThru, follow these steps.

1 Make sure your device and computer are properly connected and turned on.

2 Place a photo or page on the document glass or ADF.

3 After installing the Samsung software, the SmarThru 4 icon will appear on the desktop. Double click the SmarThru 4 icon.

Allows you to scan images and save them to an application or folder, send by email or publish to a website.

The function of editing an image saved as a graphic file and then transferring it to a selected application or folder, sending it by e-mail or publishing it on a website.

Copy function with professional quality. Creates black and white or color copies of images (if the device supports this mode) and configures copy settings.

Print function of previously saved images. Provides printing in black and white or color images (if the device supports this mode).

Allows you to fax images or files saved on your computer. This feature is available when the machine supports fax functions.

4 Click the Scan button. The Scan menu bar appears in the SmarThru window.

The Scan menu bar provides the following options.

Scanning an image and saving the result in a graphics application such as Paint or Adobe Photoshop.

Scan an image and send it by e-mail. Ability to scan an image, preview it and send it by email.

To send an image by email, you need to have an email client such as Outlook Express installed with your email account.

Scanning an image and saving the results in a folder. Allows you to scan an image, preview and save the image in the desired folder.

Image scanning and text recognition. Allows you to scan an image, preview it, and send it to an OCR program.

Recommended scan settings for OCR:

Scan an image, preview and publish the resulting data on a website as a file of a predetermined format.

Configuring Basic Scan Functions. Allows you to configure the settings for the Application, Email, OCR and Website functions.

6 SmarThru 4 opens the window for the selected function. Adjust scan settings.

7 Click the Scan button to start scanning.

If you want to cancel the scan job, press the Cancel button.

information about SmarThru can be obtained by clicking the button in the upper right corner of the window. The SmarThru Help window will open, allowing you to view the onscreen help supported by the SmarThru program.

Scanning Using TWAIN-Compliant Software

To scan, you must use TWAIN-compliant applications such as Adobe PhotoDeluxe or Adobe Photoshop. Before using the scanner for the first time, in the application settings, specify the device as the TWAIN source.

The scanning process consists of several stages.

1 Check that the device and the computer are properly connected and turned on.

2 Load the documents face up in the ADF.

Place the document face down on the platen glass (buying cartridges for HP, epson, Canon, brother printers, buying HP, epson, Canon, brother inkjet cartridges, sell new cartridges, sell original cartridges, buy inkjet cartridges for printers, buy expensive. sell to a warehouse, we buy out original cartridges).

3 Open an application (such as PhotoDeluxe or Photoshop).

4 Open the TWAIN window and set the scan settings.

5 Scan the document and save the resulting image.

Follow the program instructions to scan the image. Refer to the user manual of this application.

Scan to Samsung SCX-4200

Scanning with Samsung SmarThru

Samsung SmarThru software is included with the machine. SmarThru makes scanning easy.

SmarThru4 is suitable for Windows 98 or later.

Before proceeding with the uninstallation of the program, close all applications running on the computer.

2 Select SmarThru 4 and then. Uninstalling SmarThru 4.

3 When prompted to confirm deletion, click OK.

You may be prompted to restart your computer. In this case, to save the changes, turn off and then restart the computer.

Scanning Using the Windows Picture Download Driver (WIA)

The machine supports the Windows Image Download (WIA) driver for scanning images. WIA is a standard Microsoft, Windows, XP component designed to work with digital cameras and scanners. Unlike the TWAIN driver, the WIA driver allows you to scan and work with an image without the need for additional applications.

The WIA driver only works under Windows XP and only through the USB port.

Load documents face up in the ADF.

Place the document face down on the exposure glass.

From the Start menu, select Settings, Control Panel, and Scanners and Cameras.

Double click the icon. The Scanner and Camera Wizard will start.

Select your scan options and click the Preview button to see how your changes are reflected in the image.

Enter a name for the file, select its format and location,

Follow the instructions on the screen to edit

the image after copying it to the computer.

If you need to cancel the scanning process, click the Cancel button in the Scanner and Camera Wizard.

NNCXV.INFO 2021