How to set up auto-lock on iPhone

How to change or turn off auto-lock time on iPhone and iPad

An equally important parameter is the time after which the iPhone and iPad will be automatically locked and, accordingly, the display will go out. For all, this indicator is initially set at one minute.

You can adjust this parameter by going to Settings → Display and brightness → Auto-lock.

The time interval can vary from 30 seconds to five minutes, and there is also an option that allows you to completely disable automatic blocking, however, we recommend using it only in exceptional cases.

auto-lock, iphone

Auto-lock on iPhone: how to enable, disable, why not active

There are a huge number of ways to increase the battery life of iOS devices, ranging from the simplest to radical ones that will limit the functionality of the iPhone and iPad. Today we will talk about the time after which the automatic blocking of apple gadgets occurs, we will tell you how to change it and what can affect it.

The display of iPhone, iPad and any other gadget, regardless of manufacturer, is one of the most energy-consuming components. Its brightness and operating time significantly affect the operating time of devices on a single charge.

To save energy, you can dim the brightness and activate the Auto Brightness function by going to Settings → Display and brightness.

Starting with iOS 11, this switch has been moved under Settings → Accessibility → Display and text size.

Why auto-lock on iPhone is not active?

A no less popular feature in iOS 9 is the power saving mode, thanks to which the operating system partially restricts the operation of some services. So, in the case when it is activated (you can do this by going to Settings → Battery or from the Control Center), the ability to change the display lock time will be disabled, and the indicator will automatically be set for 30 seconds.

After turning off the power saving mode, the parameter will return to its original value (for example, for one minute).

How to Enable Screen Lock on iPhone. How to Enable and Set up Auto Screen Lock on iPhone and iPad

We use the lock key

Of course, the simplest and most popular way to lock your phone is by using a dedicated button. This is a key located on the top panel. To use it to block the iPhone, the subscriber only needs to hold a single press on this button. As a result, the screen turns off and the iPhone goes into lock mode. To unlock the smartphone, you just need to repeat the same operation, as well as enter the graphic or digital key, if there is one and is connected on your mobile device.

Locking a stolen smartphone

The developers of the world famous Apple products took care of their customers, as well as their safety in the event of phone theft. If you have become a victim of picks and lost your iPhone, you need to block it as soon as possible, and then seek help from local law enforcement agencies.

Every owner of an apple smartphone can block it from a distance on their own. In addition, you can also erase personal information, or leave an SMS with your coordinates, if it happens that the iPhone is lost.

To carry out the blocking operation, the subscriber needs to use a program called “Find iPhone“. This can be done through iCloud, or through another device based on iOS.

If your iPhone is stolen, you need to activate Lost Mode as soon as possible. This can be done using the following sequential steps:

  • First you need to visit the iCloud website and enter your own Apple ID in the required window, as well as a password combination.
  • After that, you need to go to the “Find iPhone” program.
  • Then the location of the smartphone is determined. The subscriber can see the location of the gadget on the map, in the form of a green circle, which must be clicked.
  • In the window that appears, click on the letter “i”, and then, in a new pop-up window, you must click on the function called “Lost Mode”.

After that, you will need to enter the previously set smartphone password, but if it was not there, you will need to come up with and remember the password, since with its help you will then unlock the missing phone. Then you need to write a number, which will then be displayed on the screen of the missing apple phone. This number will serve as a contact to establish communication with you.

The missing smartphone will be instantly blocked if it is connected to the Global Network, if not, then the blocking will occur the first time you connect to the World Wide Web.

How to set up self-locking screen on iPhone?

To enable auto-blocking, you must:

  • Find in the “Settings” item “Screen and brightness”.
  • This will open the required submenu labeled “Auto-lock”.
  • Here you can also select, if you wish, one of the time intervals after which the device will go into sleep mode.
  • The range ranges from 30 seconds to 5 minutes. Unfortunately, more or less of these extreme values ​​in the iPhone is not yet provided.
  • In the factory settings, this indicator is fixed at the “1 minute” mark as the best option.

Sometimes the battery indicator is highlighted in yellow. This indicates that the power saving mode is on, which automatically (usually after 30 seconds) locks the iPhone. By disabling it, you can customize the time of inactivity after which the display turns off.

What else?

Be careful with this feature. For example, if you have small children who have access to an iPhone, it is better not to turn it on, otherwise the increased security measures will turn against you.

How to set screen lock time

By default, the iPhone‘s screen automatically locks after 2 minutes, which is quite enough for a comfortable interaction with the phone. You can choose any interval from half a minute to five minutes or cancel it altogether.

And what to do if this item is not available?

If it is grayed out, the phone is in power saving mode. To change the lock time, you first need to put the phone into normal mode.

How to change the power consumption mode

Settings → Battery → Power Saving Mode.

Please note that when power saving is on, the screen automatically locks after 30 seconds of inactivity

And turn it off as shown in the screenshot below.

Energy saving disabled

Now we return to the “Auto-lock” menu and choose the right time.

Update instructions

UPD. Some screenshots below have become irrelevant due to the iOS interface update. I attach an actual screenshot of the screen, with the item you need to change the auto-lock settings.

READ  How to connect watch to iPhone 8

Settings → Display & Brightness / iOS 10.2.1 /

How to change auto-lock on iPhone

The main source of electricity consumption in modern smartphones is the screen. If it is running at full brightness, the average static mobile device will be fully discharged in 3-4 hours. Auto-locking the screen helps to avoid this. For example, if the owner of the smartphone hastily forgot to lock the device somewhere, thereby turning off its screen, then in a very short period of time the battery can be significantly discharged. This can create an uncomfortable situation in the middle of the work day.

The iOS operating system for this case has a function designed to automatically lock the screen. To enable and configure it, launch the “Settings” application, and then go to the “Display and brightness” section and select the “Auto-lock” menu here. There are several options available for iPhone, iPad and iPod Touch owners, one of which must be selected.

The most popular option is 3 minutes. This means that if no action is taken with the smartphone for three minutes, then its screen will automatically turn off, and the device will be locked. At the same time, a few seconds before this, the display will become very dim, so the owner of the iPhone, iPad and iPod Touch will have a few seconds to prevent the screen from auto-locking.

If you select the “Once upon a time” option, the automatic screen lock will not work. Using this setting is not recommended, as it can not only significantly reduce the battery life of the device, but also negatively affect the screen itself. As you know, the more and longer it is used, the higher the probability of its breakdown. Why tempt fate again?

Until May 10, everyone can get a Xiaomi Mi Band 4 sports bracelet for free, spending just 2 minutes.

Join us at Go o g l e News. YouTube and RSS to keep abreast of the latest news from the world of future technologies.

Automatic screen dimming on iPhone is necessary in order not to waste your smartphone’s battery. In most cases, such a chip will be very useful, it allows you to save from 10 to 30 percent of the charge, depending on the intensity of using the smartphone. But sometimes, when rewriting some text, you need the screen to be always active. How to do this, we will tell you in this article.

Where and how?

First, determine for yourself what you need. A permanently active screen, or 5 minutes will be enough for you, after which the screen will dim.

  • We go into the settings and scroll down to the “Screen and brightness” section
  • Once in, you need to find “Auto-lock”

Perhaps it will not be available from you, how to solve this? This fix is ​​very simple, you just need to turn off the power saving mode: Settings. Battery. Power saving mode.

  • After you have done this, click on “Auto-lock” Here you will see options for the time, after which your screen will dim, which will indicate that it will soon go out completely.
  • If you choose, then you’re done, it’s done.

Do not forget that after you re-enable energy saving, the auto-lock time will automatically be reduced to 30 seconds, there is no getting away from this.

Thank you for reading our article, we hope we helped you. Also read the article on how to save your smartphone battery in winter.

iOS 9 is an energy efficient system. It was in the ninth version that the power saving mode first appeared, which promises to extend the battery life of the smartphone by 3 hours.

If you often need to access the phone and do not enter the password or put your finger on the fingerprint scanner each time, you can increase the waiting period before blocking or turn it off altogether.

How to turn off auto-lock on iPhone

If you are not satisfied with any of the suggested time intervals, then you can turn off auto-blocking altogether by selecting the item “Never”.

Hope you got it right and this guide helped save your time. If so, then like, 1 or your other favorite social media button.

Why auto-lock on iPhone is not active?

A no less popular feature in iOS 9 is the power saving mode, thanks to which the operating system partially restricts the operation of some services. So, in the case when it is activated (you can do this by going to Settings → Battery or from the Control Center), the ability to change the display lock time will be disabled, and the indicator will automatically be set for 30 seconds.

After turning off the power saving mode, the parameter will return to its original value (for example, for one minute).

Smartphones have become part of our life quite tightly and we have to work with them in different conditions.

Sometimes the iPhone serves as a kind of hint or reminder, for example, when opening a healthy recipe in the kitchen or when viewing instructions while repairing something.

Hands may be busy or too dirty to re-pick up the smartphone and unlock it after a few minutes.

Of course, you can go to the Settings. Display and brightness menu and disable Auto-lock, but there is another way to quickly disable the display lock.

How to remove auto-lock screen on iPhone

There are a huge number of ways to increase the battery life of iOS devices, ranging from the simplest to radical ones that will limit the functionality of the iPhone and iPad. Today we will talk about the time after which the automatic blocking of apple gadgets occurs, we will tell you how to change it and what can affect it.

The display of iPhone, iPad and any other gadget, regardless of manufacturer, is one of the most energy-consuming components. Its brightness and operating time significantly affect the operating time of devices on a single charge.

To save energy, you can dim the brightness and activate the Auto Brightness function by going to Settings → Display and brightness.

Starting with iOS 11, this switch has been moved under Settings → General → Accessibility → Display Adaptation.

How to change the auto-lock time on iPhone and iPad

An equally important parameter is the time after which the iPhone and iPad will be automatically locked and, accordingly, the display will go out. For all, this indicator is initially set at one minute.

You can adjust this parameter by going to Settings → Display and brightness → Auto-lock.

The time interval can vary from 30 seconds to five minutes, and there is also an option that allows you to completely disable automatic blocking, however, we recommend using it only in exceptional cases (by the way, the minimum threshold of 30 seconds appeared only in iOS 9, in previous versions iOS it was not there).

READ  How to Reset Passcode on iPhone 7

How to setup

It is convenient to use the Guided Access mode to temporarily disable the screen lock.

For those who have forgotten, we remind you that this mode allows you to quickly block certain features of the iPhone. This can be useful when you lend your device to kids, lend a colleague in the office, or just let a stranger call.

Go to Settings. General. Accessibility. Guided Access.

Enable the option and configure the disable code. Conveniently enable the Touch ID option to quickly disable the mode.

To activate Guided Access, you can press the Home button three times, add a switch to the control point (Settings. Control Center. Customize Controls) or ask to turn on Siri mode.

The mode can be started after opening any application.

In the parameters at the first start, set the timer for 23 hours and 59 minutes so that the smartphone does not lock up, and if necessary, you can also disable the Power button.

Now open the application with the recipe, instructions or other necessary information and activate the Guided Access.

The smartphone in this mode will not block the display, if in addition to disable the side button, then blocking the device will not work even by accident. The backlight will dim for some time, but any touch on the screen will return to its original state.

(No votes)

Automatic screen dimming on iPhone is necessary in order not to waste your smartphone’s battery. In most cases, such a chip will be very useful, it allows you to save from 10 to 30 percent of the charge, depending on the intensity of using the smartphone. But sometimes, when rewriting some text, you need the screen to be always active. How to do this, we will tell you in this article.

Where and how?

First, determine for yourself what you need. A permanently active screen, or 5 minutes will be enough for you, after which the screen will dim.

  • We go into the settings and scroll down to the “Screen and brightness” section
  • Once in, you need to find “Auto-lock

Perhaps it will not be available from you, how to solve this? This fix is ​​very simple, you just need to turn off the power saving mode: Settings. Battery. Power saving mode.

  • After you have done this, click on “Auto-lock” Here you will see options for the time, after which your screen will dim, which will indicate that it will soon go out completely.
  • If you choose, then you’re done, it’s done.

Do not forget that after you re-enable energy saving, the auto-lock time will automatically be reduced to 30 seconds, there is no getting away from this.

Thank you for reading our article, we hope we helped you. Also read the article on how to save your smartphone battery in winter.

How to change the auto-lock time and available time intervals

If we want not to disable auto-blocking, but only to change the time interval for it, we can choose from the available ones. There are several spacing options in Settings. from 30 seconds to 5 minutes.

  • Go to Settings, go to “Screen and Brightness”, then. in the “Auto-lock” menu.
  • Among the options presented from 30 seconds to 5 minutes, choose the one that suits us, click on it.

Choosing the desired interval option.

Done! Now auto-blocking will be performed at the selected time interval.

Disable auto-lock via Settings

If we want to turn off auto-lock screen, we need to do it through iPhone Settings:

  • We go to the Settings section, select the item “Screen and Brightness”.

We select the section “Screen and brightness”.

  • Now we find the item “Auto-lock”, open it, and put a tick in front of the option “Never” (deactivate auto-lock).

Selecting “Never” to disable auto-lock.

How to turn off auto-lock on iPhone?

The Auto Screen Lock on iPhone is designed specifically to conserve battery power as a long-glowing screen is energy-consuming. But what to do if the user is uncomfortable that the screen locks too quickly, and this interferes with the work?

In the article, we will take a closer look at how to prevent iPhone from locking (that is, how to disable auto-lock screen on iPhone), as well as how to change the time interval for auto-lock.

How to enable auto-lock.

If auto-blocking has not been previously installed on the device, and we want to enable it:

  • Go to Settings, select Screen and Brightness.
  • Click “Auto-lock” and select the time interval for it.

Click on the item “Auto-lock”.

That’s all! IPhone is now set to automatically lock the display at a selected time interval.

As we can see, enabling and disabling auto-lock on the iPhone is quite simple, it will take less than a minute. Also in the Settings, we can select the period of time after which the automatic blocking will be performed.

iPhone 11 / 11 Pro Max: How to Change the Auto-Lock (Screen Timeout) Time Before Locks

We hope that our instructions were useful for the readers, and now you can easily understand the process of regulating auto-lock on the iPhone.!

How to turn off auto-lock on iPhone

After logging out of a phone session, users are accustomed to locking the screen by pressing the Home button. But if a book is open on your device, a movie is paused, or files are downloading, it’s easy to forget to turn off the screen. In this case, the system independently performs this function. It is useful for every owner to know how to turn off auto-lock on iPhone.

Change auto-lock time for iPhone and iPad

Depending on the version of the operating system, the screen of the “apple” gadgets goes out after 1 or 2 minutes. Changing this time interval is simple: select Display and brightness in the Settings menu, go to the Auto-lock section.

The window that pops up will have several options, including the one responsible for how to turn off the lock on iPhone. By checking the box next to the desired one, you can literally change the auto-lock mode in two clicks. If desired, it is easy to return it back, but choosing the “Never” option is not recommended.

Sometimes users are faced with the problem of the auto-lock time being immutable. The explanation turns out to be simple. in the Power Saving mode it is impossible to change this interval. it is fixed at 30 seconds by default.

Relationship between auto-lock and charge consumption

When the screen is turned on, the battery power is dramatically affected, especially at high brightness levels. The first step to reducing battery consumption is to either set the brightness to low or switch to Auto Brightness mode. To do this, open Settings and select the Display and brightness section. this path is relevant for iOS versions older than 11. Starting with it, the procedure has changed:

  • Settings.
  • The main.
  • Universal access.
  • Display adaptation.
READ  How to transfer pictures from computer to iPhone

Knowing how to set up auto-lock on iPhone will allow you to use your phone comfortably. The screen will not go dark for a long time, unless the power saving mode is activated. You can change the automatic blocking time in the settings, depending on the iOS version, the procedure may differ.

Ways to Disable Auto-Lock Option on iPhone

Just as in the case of turning on, to turn off, you should perform the same procedure:

  • Settings-Screen and brightness-Auto-lock.
  • Select “Never” from the list that appears.
  • In this case, the monitor will go to an inoperative state only if the unit button is pressed.

According to experts, this can subsequently lead to a breakdown of the device and to expensive repairs.

How to use Auto Lock on iPhone: turn it on, set it up, turn it off?

How to change the power consumption mode

Settings → Battery → Power Saving Mode.

Please note that when power saving is on, the screen automatically locks after 30 seconds of inactivity

And turn it off as shown in the screenshot below.

Energy saving disabled

Now we return to the “Auto-lock” menu and choose the right time.

iPhone 7 / Plus: How to Change Auto Lock Screen Timeout (New Location for iOS 10 & Above)

Where and how?

First, determine for yourself what you need. A permanently active screen, or 5 minutes will be enough for you, after which the screen will dim.

  • We go into the settings and scroll down to the “Screen and brightness” section
  • Once in, you need to find “Auto-lock”

Perhaps it will not be available from you, how to solve this? This fix is ​​very simple, you just need to turn off the power saving mode: Settings. Battery. Power saving mode.

    After you have done this, click on “Auto-lock

  • If you choose, then you’re done, it’s done.

Do not forget that after you re-enable energy saving, the auto-lock time will automatically be reduced to 30 seconds, there is no getting away from this.

Thank you for reading our article, we hope we helped you. Also read the article on how to save your smartphone battery in winter.

How to enable and configure auto-lock screen on iPhone and iPad

The main source of electricity consumption in modern smartphones is the screen. If it is running at full brightness, the average static mobile device will be fully discharged in 3-4 hours. Auto-locking the screen helps to avoid this. For example, if the owner of the smartphone hastily forgot to lock the device somewhere, thereby turning off its screen, then in a very short period of time the battery can be significantly discharged. This can create an uncomfortable situation in the middle of the work day.

The iOS operating system for this case has a function designed to automatically lock the screen. To enable and configure it, launch the “Settings” application, and then go to the “Display and brightness” section and select the “Auto-lock” menu here. There are several options available for iPhone, iPad and iPod Touch owners, one of which must be selected.

The most popular option is 3 minutes. This means that if no action is taken with the smartphone for three minutes, then its screen will automatically turn off, and the device will be locked. At the same time, a few seconds before this, the display will become very dim, so the owner of the iPhone, iPad and iPod Touch will have a few seconds to prevent the screen from auto-locking.

If you select the “Once upon a time” option, the automatic screen lock will not work. Using this setting is not recommended, as it can not only significantly reduce the battery life of the device, but also negatively affect the screen itself. As you know, the more and longer it is used, the higher the probability of its breakdown. Why tempt fate again?

Until July 14 inclusive, everyone has the opportunity to get a Xiaomi Mi Band 4 Smart bracelet for free, spending only 1 minute of their personal time on it.

Join us at , YouTube, Google and RSS to keep abreast of the latest news from the world of future technologies.

how to turn on, configure and turn off?

The durability of mobile phones and tablets depends on the time of screen activity and its brightness. In this matter, the “Auto-lock” option is important, which reduces power consumption and keeps the battery charged for as long as possible. How to adjust auto-lock settings on iPhone?

Auto-lock time

The screen is the main power consumer in a smartphone. No matter how good a mobile device is, if the screen brightness is maximum, then the battery will last for a maximum of 4-5 hours. Automatic display lock solves this problem. The iPhone operating system has a function that is responsible for auto-locking. It’s easy to turn it on. It is enough to open “Settings”, select “Screen and Brightness” and then “Auto-lock”. The time slots are shown here. This is the time of inactivity of the smartphone, after which its screen will turn off automatically. The most optimal choice is three minutes. A few seconds before the appointed time, the display will dim, after which the device will be locked. Although if the early blocking of the iPhone does not bother you, then it is quite possible to choose 30 seconds. For example, I have 1 minute set. Enough of this time.

By the way, the same time is used in games. Those. when you are in the game, put the phone down and go on business, after the set auto-lock time, the screen will go out. Some games forcibly disable this feature, you need to watch this at least.

If the item “Never” is selected, then the auto-lock function will be unavailable.

You can also use Assistive Touch to lock your phone. It is included from “Universal Access” through the “Settings” application. Its activation leads to the fact that on the display, over the desktop, a key appears. With its help, you can not only lock the device, but also adjust the sound, press the “Home” button, etc. This can be very useful if, for some reason, these keys malfunction.

NNCXV.INFO 2021