How To Set Up Wi-Fi On An HP Printer

Samsung laser printers. How to set up Wi-Fi Direct

Enter the printer’s IP address into your web browser.

Log in by clicking the Login option in the upper right corner of the display.

Enter the printer’s IP address into the browser and click “Login”

On the left side of the display, under Wireless, select Wi-Fi Direct. And then turn on Wi-Fi Direct.

Device Name: Enter the printer name to search for your printer on the wireless network. The default is the device name. This is the model name of the printer.

IP Address: Enter the IP address of the printer. This IP address is only used for Wi-Fi Direct and is not used for wired or wireless networks. It is recommended to use the default local IP address (192.168.3.1).

Group owner: enable this option to assign the owner of the Wi-Fi Direct group to the printer. Group owner acts like a wireless access point.

Network password: if your printer is the owner of the group, the network password is required for second mobile devices to connect to your printer. You can set the network password yourself or save the specified network password which is randomly generated by default.

Click Apply. To save changes.

After Wi-Fi Direct is enabled, you need to download a mobile printing application such as Samsung Mobile Print App to print from your smartphone or other mobile device.

How to turn on Wi-Fi on the printer

In the settings of a personal computer or laptop, open the “Network Neighborhood” folder, then sequentially go to the “Properties” and “Network Connection” items. In the window that opens, go to the sub-item “Local network”, and then. “Network adapter properties”. After that, we find the “General” tab and select the TCP / IP protocol, then in the “Properties” window you need to specify “Use IP addresses”. Here you need to enter the IP address of the equipment (it can be found in the instructions supplied with the printing device).

As you can see, connecting a printer via Wi-Fi is not that difficult. Just follow our instructions and you will certainly succeed.

Method one. connect via WPS

This method will only work for you if both the printer and the router support WPS (Wi-Fi Protected Setup) technology. If so, then follow these steps:

    Using the navigation keys in the printer menu, enter the wireless connections section;

Select WPS as the connection method;

  • Press and hold the WPS button on the router until the indicator flashes;
  • Press and hold the “OK” key on the printing device until it says that the connection was successful.
  • HP printers. Wi-Fi Direct Printing

    Wi-Fi Direct and HP Wireless Direct provide direct wireless connection between the printer and a mobile device or computer without a router.

    Most HP wireless-enabled printers use Wi-Fi Direct, an industry standard connection type developed by the Wi-Fi Alliance (in English). HP Wireless Direct. This is technology developed by HP and used in most wireless printers released between late 2011 and mid 2014. If your printer uses HP Wireless Direct, go to HP Wireless Direct Printing for more information.

    View this table to find out the differences between the two connection technologies.

    HP Wireless Direct

    Safety

    WPA2 password required

    WPA2 password is NOT required

    Maximum number of SIMultaneous device connections

    Printer name that appears when printing or connecting

    DIRECT-xx-HP [printer model]

    HP-Print-xx- [printer model]

    The wireless computer or device can automatically detect and connect to the printer

    Yes: automatic or manual (button / PIN)

    The computer or device can connect to the printer and the Internet at the same time

    Android devices and Windows 10 or 8.1 computer

    Devices can connect to the Internet and / or to each other through a printer

    The printer can connect to the Internet through the device

    Printer IP address (for accessing the printer‘s Embedded Web Server)

    Automatic and manual settings

    You need to connect to a printer before selecting and printing a document or photo

    The “Xx” in a Wi-Fi Direct name or HP Wireless Direct name is a two-digit code unique to the printer.

    How to set up a printer over Wi-Fi: 4 ways to connect

    • We connect via WPS
    • Using the SSID password
    • Connect without using a password
    • We use a computer

    Wireless technologies are incredibly popular today, so manufacturers of electronic equipment must take this nuance into account. So, almost all modern printers are equipped with a Wi-Fi module, and this is very convenient, because you no longer need to use wires to connect the device to a PC or mobile gadgets. Plus, it’s very easy to set up and connect your printer via Wi-Fi, and in this article we’ll talk about how to do it without the hassle.

    Method three. connect without using a password

    If you have a printer without an LCD display, you can do without entering the SSID. For this:

      Press the Wi-Fi button on the control panel. the indicator will blink. This means the printing device is trying to connect to a wireless network;

    Next, you need to find and press the WPS button on the router, by which you agree to connect the device;

  • The light on the printer control panel will then turn green.
  • Method two. use the SSID password

    A fairly SIMple way to connect to Wi-Fi, but it works only in one case. if the printing device is equipped with an LCD screen. So, you need:

      Enter device settings;

    Select “Wi-Fi Settings”;

    Go to the menu “Wi-Fi connection setup”;

    Go to the sub-item “Wireless Network Setup Wizard”;

  • Find your network in the displayed list;
  • Enter SSID password (be sure to be case sensitive!).
  • If everything is done correctly, the Wi-Fi icon on the printer will turn green. Our congratulations! You have connected Wi-Fi yourself using SSID password.
  • HP printers. Wi-Fi Direct Printing

    Wi-Fi Direct and HP Wireless Direct provide direct wireless connection between the printer and a mobile device or computer without a router.

    Most HP wireless-enabled printers use Wi-Fi Direct, an industry standard connection type developed by the Wi-Fi Alliance (in English). HP Wireless Direct. This is technology developed by HP and used in most wireless printers released between late 2011 and mid 2014. If your printer uses HP Wireless Direct, go to HP Wireless Direct Printing for more information.

    View this table to find out the differences between the two connection technologies.

    HP Wireless Direct

    Safety

    WPA2 password required

    WPA2 password is NOT required

    Maximum number of SIMultaneous device connections

    Printer name that appears when printing or connecting

    DIRECT-xx-HP [printer model]

    HP-Print-xx- [printer model]

    The wireless computer or device can automatically detect and connect to the printer

    Yes: automatic or manual (button / PIN)

    The computer or device can connect to the printer and the Internet at the same time

    Android devices and Windows 10 or 8.1 computer

    Devices can connect to the Internet and / or to each other through a printer

    The printer can connect to the Internet through the device

    Printer IP address (for accessing the printer’s Embedded Web Server)

    Automatic and manual settings

    You need to connect to a printer before selecting and printing a document or photo

    The “Xx” in a Wi-Fi Direct name or HP Wireless Direct name is a two-digit code unique to the printer.

    How to enable and configure Wi-Fi on a laptop or netbook

    Sometimes laptop or netbook users have various difficulties when turning on and configuring Wi-Fi. The procedure itself is quite SIMple, but in some cases there are various snags and unforeseen difficulties, and sometimes you also need to first configure the router before you start connecting the laptop to it.

    READ  How To Reset The Printer Replace Toner

    In this article, we will consider both a standard Wi-Fi connection and solutions to some problems.

    How To Set Up Wi-Fi On An HP Printer

    An example of a hidden Wi-Fi switch. When everything is normal

    In the lower right corner of the screen, on the Windows 10 taskbar, find an icon in the form of network or globe divisions. Don’t forget that this icon can be hidden behind the up arrow. After clicking on the icon, a small window with available Wi-Fi networks will appear at the bottom right. Find your network among them, select it and click on the “Connect” button.

    After that, the system should ask you to enter a password or press the WPS button on the router.

    If the password is entered correctly, then you will see a window with the question: “Do you want to allow other computers and devices in this network by detecting your PC?”. If you are connecting to your home router, then click on the YES button, and if in a cafe then NO.

    After THESE SIMple steps, you will successfully connect to a wireless Wi-Fi network.

    Driver check

    Before configuring, you need to check for the installed drivers. To do this, in the Control Panel, select Device Manager, which can be hidden inside the Hardware and Sound item.

    A window will open in which you need to find Network adapters. There should be two items: Ethernet and Wi-Fi. One of them should have the word “Wireless” in its name. This is your wireless adapter.

    If there is no entry in the Wi-Fi adapter, or there is an icon with an exclamation mark on a yellow background opposite it, this means that there is a problem with the driver. If there is no entry, it means that the drivers are not installed and you have to install them from the disk that came with the laptop. Or find it on the laptop manufacturer’s website and download it.

    Without drivers, the Wi-Fi adapter will NOT work. If there is a record, but opposite it there is a yellow exclamation mark, right-click on this item. In the window that appears, select “activate”.

    The reason for the difficulties in connection may lie in the fact that the power saving mode is set in the adapter. To disable it, right-click on it, then Properties and Power Management, now you need to uncheck the box “Allow this device to be turned off to save energy”.

    The driver should be fine now.

    Enabling the wi-fi adapter if it is disabled

    To do this, open Control Panel → Network and Internet go to Network Connections. Find Wireless Network Connection here. This is the wi-fi adapter. Right-click on it and open the Dialog Box, then select “Enable”.

    Turn on the Wi-Fi adapter on the laptop

    Usually, to turn on Wi-Fi, it is enough to perform 2-3 SIMple operations. Which one depends on the model and manufacturer of the laptop. Here are the options for enabling Wi-Fi on laptops from the most popular manufacturers:

    • On an ASUS laptop, press the FN and F2 keys.
    • On Acer and Packard bell, hold down the FN button and Do not release it, press F3.
    • On HP notebooks, Wi-Fi is activated by a touch button with a symbolic antenna image, and on some models by a combination of FN and F12 keys. There are also such models on which a regular button with a pattern in the form of an antenna is provided for this purpose.
    • To turn on Wi-Fi on Lenovo, hold FN and press F5. There are models where there is a special hardware switch to enable / disable the wireless network.
    • On laptops from Samsung, to turn on Wi-Fi, you need to hold down the FN button, press either F9 or F12, depending on the model.

    To connect Wi-Fi on laptops of different models and different manufacturers, their own original key combination can be used. A detailed description for a specific model can be found in the user manual that came with the laptop. The FN button is found on almost all models of modern laptops. It connects various functions and connects the laptop to other devices. If the laptop has FN buttons, then a special button or switch is used to turn on the wireless network. Typically, it is indicated by one of THESE icons.

    If Ego was not found on the keyboard, then Exploring the ends of the laptop, perhaps the switch is on the side. And also take a close look at the bottom of your laptop. There are models in which the switch is located on the bottom cover. over, manufacturers make this button barely noticeable. It practically merges with the body, and you cannot see it at first glance. It can be Wireless or WLAN signed. If you have already turned on Wi-Fi with the desired button or key combination, and it still does not work, then you should configure it or install the driver.

    When something went wrong

    Now let’s take a look at one of the most common problems when connecting to Wi-Fi. So you turned your gaze to the lower right corner to find an icon in the form of divisions or a globe, but it was not there, and instead there is an icon in the form of a monitor with a red cross on it. This means that your Wi-Fi adapter is disabled and you need to reconnect it. To do this, click on the icon in the form of a monitor, right-click, and in the pop-up menu, select the Network and Sharing Center item. In the window that opens, click on the item in the lions menu Change adapter parameters.

    Then the Network Connections window will open. In it, if you enter an icon with the signature Wireless network, and under it it says Disabled. Then you just need to turn it on. To do this, right-click on it and select the Enable menu item. After that, the wireless network card will be turned on.

    If there is a Wireless network icon in the Network Connections window, then it is possible that your Wi-Fi adapter is disabled by the hardware switch on the laptop case, or the driver is not installed on it.

    How to turn on Wi-Fi on a Windows 7 laptop

    So, let’s figure out how to turn on Wi-Fi on a laptop with Windows 7. If something does not work out for you, you can always contact me for help in the comments.

    Check if the driver is installed

    Click anywhere (empty) on the lower taskbar with the right mouse button, and in the drop-down menu select Options.

    Then click on the Home link in the left menu, then on the Devices icon.

    On the page that opens, at the very bottom, select Device Manager.

    Now in the window that opens, expand the Network adapters tab, the name of your Wi-Fi adapter should be displayed there, usually its name contains the word “Wireless”.

    First of all, pay attention to the icon next to the name of your adapter. If it has any extraneous icons such as “Exclamation mark” or “A circle with a dot”, then this means that the driver is installed, but does not work correctly. To fix the problem, you need to update or reinstall the driver. It often happens that in the Network adapters tab, there is no wireless adapter with the word “Wireless” at all, which means that the driver for your adapter is not installed. If this is the case, then in the Other devices branch there will be an inscription “Unknown device” or “Unknown network adapter”. It will look something like this:

    The solution to this problem is to install the driver from the laptop manufacturer’s website or from the disk that came with the laptop. If in the Other devices branch there is a term “Unknown device”, then this may mean that your Wi-Fi adapter is disabled, out of order, or SIMply missing.

    READ  How to Disassemble Canon Mg2540s Printer

    Configuring Windows XP

    The router has configured, now configure the computer. On laptops, Wi-Fi is usually turned on with a special key combination, which keys are these and how to turn on Wi-Fi on a laptop can be viewed at the specified link. We go into the properties of the wireless connection. There is a Network Connections icon on the desktop. Open them and with the right mouse button select “Properties” in the wireless network connection.

    Properties of the TCP / IP protocol. Find “Internet Protocol TCP / IP”, select it and click “Properties”.

    TCP / IP properties. Everything is SIMple here. Set the required IP address and subnet. Gateway 192.168.0.1 is the address of the access point, that is, the Wi-Fi router.

    Tab “Wireless networks”. Having saved the parameters in the TCP / IP protocol, go to the “Wireless networks” tab. Clicked on the button with the same name, we get the following window.

    Refresh the list of networks. For our Wi-Fi network to appear, you must click on the corresponding inscription. Sometimes the network itself does not appear. this may be due to the disabled SSID broadcast on the router. To find a network manually, select “Set up a wireless network”.

    The network was found. The screenshot shows everything # 128521;

    We connect to the network. Having selected the network and clicked the “Connect” button, enter the password that was installed on the router (Passphrase).

    Connected. After entering the password, a window will appear, as in the picture. In it, you can add other Wi-Fi networks in the same way. The “Up” and “Down” buttons set the priority of automatic connection, ie. A computer or laptop participating in the network will automatically connect to the upper wireless connection if there are many networks.

    Let’s move on to setting up a wireless connection in Windows 7.

    Wi-Fi technology capabilities

    This technology is convenient, first of all, because it does not require additional wiring to connect several computers and devices to a network. You just need to purchase and correctly configure a router or access point. Owners of laptop computers will be able to appreciate the advantages of the technology, because using a wireless connection, you can freely move around an apartment, mansion or cottage, using a connection to the Internet and second computers and devices located within the Wi-Fi range.

    For example, you can print a document on a printer installed in the office while sitting in the living room. A wireless connection is also the best choice for users looking to create a small home network of several computers.

    Don’t forget about safety. Currently, this technology is widespread throughout the world, including. Therefore, the main task when setting up Wi-Fi should be given to the security of the connection. Many users configure, install and use these devices without attaching importance to security settings. Therefore, if you decide to configure Wi-Fi using the Infrastructure method, do not bypass our tip on how to set a password on Wi-Fi.

    Incorrect Wi-Fi setup can lead to unpleasant consequences. For example, unauthorized access to your wireless network, Internet connection at your expense and theft of confidential information. In the worst case, your computer can be used to carry out hacker attacks, as well as actions directly prohibited by Russian law. A little theory for understanding it will NOT hurt. we will describe the basic essence of securing Wi-Fi networks.

    Self-configuration of a Wi-Fi network

    The Wi-Fi network is half-duplex due to the technology itself. This feature means that only one device can operate on one frequency, acting as an access point. An access point can be either a laptop or a computer with a Wi-Fi transmitter, or specialized devices. routers that support the Wi-Fi wireless protocol. There are two ways to build a network using the wireless Wi-Fi protocol: Infrastructure and Ad-Hoc.

    Infrastructure construction method. We recommend making a network using this method. With this organization of a Wi-Fi network, all devices that work via a wireless connection are connected to an access point. It is she who transfers information from device to device. The undoubted advantage of this method is that if a router (router) acts as an access point, then it becomes possible to build a “hybrid” network, that is, to combine wired and wireless devices into one.

    The second plus is the security of such a network, since the access point takes over encryption and protection from hacking. Setting up a Wi-Fi network based on this method of construction is easier than mentioned below Ad-Hoc. Below we will describe how to configure a Wi-Fi network based on this method. With this method, it doesn’t matter which device connects to the Wi-Fi network. As mentioned above, it can be a laptop, a computer, a smartphone, or a tablet computer. Here is a typical Wi-Fi network setup using the DWL-G700AP router as an example. In fact, the model is not important, the article will only touch on the part that concerns the wireless connection. For the rest, other articles have already been prepared, the links to which are just below.

    How to connect a Wi-Fi router is written in its operating instructions or in our article on setting up a router. We also made a separate article on setting up and connecting a Wi-Fi router. For those who want to set up Wi-Fi on the other side, that is, directly on a laptop and computer, we recommend reading another article “How to connect Wi-Fi on a laptop in Windows 7, a smartphone and even a PSP.” In the next publication, we tried to summarize the typical problems that arise when setting up and using a Wi-Fi network and gave some specific advice if for some reason Wi-Fi does not work.

    Now, let’s take a look at the settings in the router itself, yet this is the preferred method for establishing a wireless connection. Having entered the router’s admin panel, we immediately go to the tab with the Wi-Fi network parameters. Wi-Fi hotspot settings. Here you need to enter the required data. These parameters are universal for all Wi-Fi routers, consider them in more detail:

    • SSID (Service Set Identifier) ​​is a network identifier that is assigned to all devices on the same network. It must be the same for all devices, or they SIMply will not “see” each other.
    • Channel. network frequency.
    • WPA / WPA2 / WPA-PSK / WPA2-PSK are data encryption protocols. It is better to use WPA2-PSK as this type of encryption provides stronger network security. It is worth remembering that support for this protocol in Windows XP appeared only in Service Pack 2.
    • Passphrase. just a password that you need to enter to connect to the network.

    How to set up Wi-Fi

    Most portable devices today, such as a laptop, tablet, or even an e-reader, support wireless networking. Wi-Fi or Wireless Fidelity (wireless fidelity) is a technology for wireless data transmission over a specially designed Wireless LAN channel.

    Would you like to learn how to set up Wi-Fi on a laptop or PC in Windows? Read about setting up Wi-Fi in our article. we will talk about the specifics of installation and connection, as well as setting up a network, and preparing the Windows operating system for working over a wireless channel.

    Configuring Windows 7

    Configuring TCP / IP settings in Windows 7 home network is the same as the above settings for Windows XP. Just go to the Network and Sharing Center through the Control Panel, Click on “Adapter Settings”, and find the desired network. Further, everything is the same as in Windows XP. the properties of the network connection and the input of parameters for the TCP / IP protocol. We will assume that you have figured out this SIMple task and proceed to the direct configuration of Wi-Fi in Windows 7.

    We go to the network control center. In order to start configuring a Wi-Fi network in Windows 7, you need to go to the “Network and Sharing Center”. Then click on “Connect to the network”.

    READ  After Refilling The Cartridge, The Printer Does Not Print Well

    A list of available networks will appear. Click “Connect”.

    Enter the password for the access point. The password, as we wrote earlier, is set at the access point (router). Click “Connect” after entering it.

    We close the last window. That’s it, you’ve configured and connected to a wireless Wi-Fi network.

    There is another way to build a network. the Ad-Hoc method. This method of configuration is SIMpler, since the devices connect directly to each other, but at the same time, it contains several significant disadvantages compared to Infrastructure. In the first method, it is possible to connect Wi-Fi devices according to standards (450 MB / s. the 802.11n standard, and 54 MB / s. the 802.11g standard), which are not available in Ad-Hoc, that is, the speed of information exchange between hosts in Infrastructure above. The absence of an access point imposes a restriction on the entire structure of the Wi-Fi network, since Using a router, you get the opportunity to operate with many parameters. the main ones are touched upon in the article in configuring the router, which describes the main capabilities of routers.

    Any user can correctly configure Wi-Fi devices, as well as their security settings in operating systems. As we learned from this article, you can configure Wi-Fi on a laptop or computer equipped with a Wi-Fi module in at least two ways: using a router and using the laptop or computer itself. Thus, the Internet will work on all devices equipped with appropriate adapters, such as mobile phones, laptops, netbooks, and PDAs. In addition, via Wi-Fi, you can connect and configure peripheral devices such as printers, scanners and MFPs.

    Configuring and connecting the HP LaserJet P1102w Wi-Fi printer to the router’s network

    This material describes how to connect and configure the HP LaserJet P1102w printer to a Wi-Fi network of a home or office router using the WPS button and through software installation from the HP official website. This article will guide you through the configuration of most HP Wi-Fi printers that have an information screen in the panel

    HP printers use the “w” for Wi-Fi. Consider this when purchasing a printer

    Unpack the printer and connect it to a 220 volt network. Connect it with an interface cable to the computer Not required yet. You will do this in the middle of the installation process

    If you have already tried to configure the router or it was connected to another network, then first of all reset the printer to factory settings: Turn off the printer, then SIMultaneously press two buttons on the top panel (buttons with an antenna and a cross), then turn on the device. It is required to hold the keys for 20 seconds after turning on until the orange and green LEDs start the morgue SIMultaneously and rhythmically

    Press the button with the antenna on the printer (the top button in the picture above). Press the WPS button on the Wi-Fi router (in some models, you need to hold the button for a few seconds)

    After one to two minutes, the printer will be connected to the wireless network

    Details on using and configuring the WPS button (in some models it is disabled by default) is described in our materials on configuring routers:

    After starting the application, you need to select a photo or document for printing, then the application will independently find the printer in the local network, and you will only have to click the “Print” button

    Connecting the HP LaserJet P1102w printer to a wireless network and installing the driver from the HP official website on a computer or laptop with a Windows operating system

    To set up the printer Use a computer or laptop connected to a wireless network

    After the reset, you need to install the software. You can use the included disc, but it’s best to download the latest version from the manufacturer’s website

    Follow the link to the manufacturer’s website. Enter the model name in the search bar and click the “Search” button

    The operating system version is detected automatically. In our case, software is required for 32-bit Windows 7

    Below we select the required software package. In the “Driver-Device Software Installation Kit” section, click the “Download” button next to “Full Feature Software and Driver for HP LaserJet Pro P1100, P1560, P1600 Series”

    After the download is complete, run the installer file

    Wait for the program to unpack the package and extract the files

    In the window for selecting the device to be used, find the required series of printers (in our case. P1100) and click “Wireless installation”

    In the next window, click the “Install Printer Software” link at the top, not the “Start Installation” item (although the latter is larger and striking)

    In the window for selecting the type of installation, put the “Advanced installation” radio button and click the “Next” button

    Be sure to agree with the terms of the license agreement (Check the box and click “Next”)

    In the Privacy Policy window. Click the “Next” button

    In the next window, uncheck the “Install HP Customer.” In order not to take part in the polls, and click “Next”

    In the next window, select the printer model. In our case, this is “P1100w Series”, and click “Next”

    In the “Printer connection method” window, select the item “Setting up for printing via a wireless network”

    Wait until the software components are updated taking into account the selected settings

    After the update, the window “Setting up for printing via a wireless network” will appear. Just now, you need to connect the printer to a computer or laptop with a USB interface cable

    As soon as you connect the printer, the Print Setup window will disappear and the software installation will continue automatically.

    In the “Wireless Discovery” window, you need to set the “Automatic” radio button. You can select the item manually and enter the parameters of your wireless network (its name and password from Wi-Fi) yourself

    Click “Next”

    After checking the entered parameters, the program should display the name of the wireless network to which your computer is connected. Click “Next”

    The installer will try to connect the printer to your Wi-Fi router

    If successful, the Product Options window appears. Set the radio button “Disable direct printing” so that only devices on your network can connect to the wireless printer (the printer broadcasts its own private open network so that you can print on it even without a router)

    Click “Next”

    After the “Successful Network Setting” window appears, you need to disconnect the USB cable from the printer and computer. Then click “Next”

    In the last window, a polite program will congratulate you on a successful installation and offer to print a test page. Be sure to do this: check the Print a Test Page box and click Next. Now you should finally hear the sound of the printer mechanisms and see the result of the installation work

    Wireless Printing Setup Utility

    The printer software package includes a utility that will help you connect to a wireless network after a factory reset without completely reinstalling the programs

    Connect the printer with a USB cable to your computer, click the “Start” button, then in the “All Programs” section, find the “HP” folder. “HP LaserJet Professional P1100 Series” and run the “Wireless Printing Setup” utility

    In the first window, click “Next”

    Wait for the end of the initialization phase

    In the “Wireless detection method” window, select the method for detecting your Wi-Fi router. Click the “Automatic” radio button, then click the “Next” button

    Check the name of the wireless network and click “Next”

    After the Successful Wireless Setup window appears, Disconnect the USB cable from the printer and computer

    Then select the “Print a Test Page” checkbox and click “Finish”

    After the steps taken, the printer should print a test page