How to turn off updates on iPhone 6

Table of Contents

How to access iOS 13 Beta profile

The principle of activating the iOS 13 beta profile is similar to a simple firmware update using a PC on MAC X OS, which was mentioned above. But there is a small amendment. this also requires an Apple computer, but additionally with a beta version of the operating system. According to the official instructions, you need either beta macOS 10.15 Catalina, or or Xcode 11. But if neither one nor the other, you can use special driver programs. For this, the familiar MobileDevice or any other analogue is suitable for many. The utility still needs a PC with an Apple operating system.

  • the aforementioned PC with the corresponding OS or program;
  • installed the latest iTunes or Finder (if there is a version of Catalina);
  • USB cable;
  • downloaded iOS 13 beta (easy to find on the Internet);
  • iPhone starting from the seventh generation or SE (which is not a shame).

Note! If any beta version of iOS is already installed on your smartphone, you need to uninstall it by going to the settings, section “General” and in the item “Profile”.

  • Install a pre-downloaded utility (if the required OS version is not available).
  • Launch iTunes or Finder.
  • Connect iPhone via USB.
  • Wait for synchronization.
  • In iTunes or Finder (the utility must be the most recent), click on the device icon and go to the “Overview” section in the left menu.
  • Then click in the new field on “Update”, while you need to hold down the “Options” button, it is “Shift”, and in the pop-up window select the pre-downloaded beta firmware.
  • Wait for iPhone to finish updating.
  • Quit iTunes and turn off your phone.

turn, updates, iphone

If everything is done correctly, developer rights will be activated, and the user gets something like Root rights in Android.

Latest iOS version for iPhone 5s and 6

Apple stopped supporting the fifth and sixth generation iPhones with the release of iOS 12.4.1. That is, this is the maximum version of the operating system that can be installed on 5, 5S, 6 and 6 plus.

You can see which iOS the phone has been updated to in the settings by going to the “General” section, followed by “About this device”. The current firmware will be indicated opposite “Version” or “Software Update”. If it is lower than 12.4.1, then in the same tab “Basic” there is an item “Software Update”, where you can reflash the gadget to the latest supported version.

Important! The current list of smartphones that can be upgraded to version 13 starts with iPhone 7 and up. iPhone SE is also supported.

iOS 12 was the last for the fifth and sixth generation iPhones

What is iOS 13 Developer Profile

After the presentation in September, Apple offered licensed IT professionals to download the iOS 13 developer profile. In principle, this is a standard procedure, but with the release of the new firmware it became more difficult to do this.

For starters, it’s worth mentioning that the developer profile is such a feature for those who are involved in creating applications on the iOS platform. Simply put, by activating it, programmers and IT studios can test their product before the official release.

And if earlier anyone could install iOS 13 beta, now, as Apple representatives say, “beta firmware was created for developers and nothing more.” Nevertheless, with the help of some loopholes, it is still possible to activate the mode without a license.

The firmware information will indicate that this is a beta version

Important! If you install a beta version, many mobile applications, such as social media or online banking, may not work. In principle, this mode should be used on the gadget that you do not mind.

How to upgrade to iOS 13 iPhone 6 or higher

It is no secret that the software of Apple gadgets evolves accordingly with their filling. In 2019, with the release of iPhone 11, developers from Cupertino presented a new version of the operating system, which, according to their statements, became revolutionary for the company. How to update iPhone 6 to iOS 13 and 5th generation gadgets below.

Iphone 6: Disable Automatic App Updates. Fliptroniks.com

How to upgrade iPhone 7 and above to iOS 13

Now it’s time to download iOS 13 to a gadget that can handle the firmware requirements. As stated above, iPhone 6S and 7 are the oldest Apple phones to support the new software.

Important! It is best to back up your device before proceeding with the update. This will protect the user from crashes during the installation, or simply allow you to return to the old firmware if the new version is not to your liking.

  • Go to gadget settings.
  • Go to the first section.
  • Select iCloud.
  • Click on the item “Backup”.
  • Activate all sliders and wait a few minutes while the system archives data.

In order not to lose your data in the event of an update failure, it is better to use a backup.

  • Connect iPhone 7 to PC.
  • Open the program and wait for synchronization.
  • Click on the icon of the connected gadget (above).
  • Next, click on the section “Automatic creation of copies”
  • Select “This PC”.
  • Click “Create a copy now”.
  • Wait for the end of the process.

Now you can safely upgrade without worrying about a bad outcome.

ITunes backup can be saved to PC files

To install iOS 13 on iPhone 7, you need:

  • Go to the “Settings” menu.
  • Click on “Basic”.
  • Followed by “Software Update”.
  • Wait until the system scans the device and the “Download” button appears. Click.
  • Select “Install” in the pop-up window. At this point, the system will prompt you to install later or at night. Better to choose the second option, as the update usually takes about an hour.

Note! The presence of the Internet during the update is strictly required.

If the installation was moved overnight, it remains only to put the phone on charge before going to bed. In the morning it will already be updated to the latest up-to-date version.

You can find out that a new version of the OS is available in the “Software update” section

You can also update iOS to version 13 via a computer. But it’s important to note that only Apple’s PC will work for this. The instruction is as follows:

  • Install the latest version of iTunes (if Catalina is installed, then launch Finder).
  • Connect iPhone to PC via USB.
  • Run the utility and select the connected gadget.
  • Download the iOS 13 file package from the official website.
  • In iTunes or Finder, click on the gadget icon and go to the “Browse” section in the left menu.
  • After clicking on “Update”, while you need to hold down the “Options” button, it is “Shift”, and in the pop-up window select the above file.
  • Confirm the intention to update and wait until the end of the procedure.

During the procedure, the iPhone will reboot and turn on automatically when finished. It remains only to disconnect from the PC and use.

Finder can be found in the Quick Access Toolbar

How to upgrade iPhone 6 to iOS 13

The same goes for iPhone 6 owners. Although you can find photos of the dark design of iOS 13 iPhone 6 on the web, it was actually a joke.

We are talking about a post in the popular hacker NighttigerFTW, who stated that he was able to bypass Apple’s blocking. However, he could not tell how he managed to install iOS 13 on the iPhone 6, and after a series of critical Комментарии и мнения владельцев from colleagues, he said that it was a joke.

The same photo of iOS 13 on iPhone 6, posted in

Note! Many users believe that Apple has also discontinued support for 6S and 6S Plus, but this is not the case.

How to install iOS 13 on iPhone 5s

In fact, back in 2019, Apple announced that with the release of the 11th generation of the legendary smartphone and the new version of iOS, it would stop supporting the frankly outdated iPhones 6 and older. Therefore, the owners of the 5S model did not receive a notification about the release of a fresh update.

The new version of Apple’s software is popular due to the presence of night mode

Unfortunately, the efforts of third-party developers and fighters against the capitalists from Cupertino also came to nothing. There are no keys to installing iOS 13 on unsupported iPhones today.

Note! In fact, it makes no sense to install the thirteenth version of the firmware on 5 S, since due to the high requirements, the characteristics of the phone will not pull the normal operation of the software.

Why iOS 13 won’t install

There are several reasons why the new iOS may not be installed. For example:

  • incompatibility between firmware and gadget;
  • lack of the Network;
  • there is not enough space in the internal memory of the device;
  • the phone needs a forced reboot.

It is worth considering each reason separately. In the first case, as mentioned above, the owner of the gadget should check whether the iPhone model for updating is supported or not. If, after the firmware was released, the device did not receive a notification about the possibility of installing a new OS, then most likely this option is excluded.

READ  How to Transfer Music from PC to iPhone

As for the second point, incorrect cellular network settings are a popular problem. There are usually no such inconsistencies with a Wi-Fi connection, so you need to:

  • Go to “Settings”.
  • Section “Cellular”.
  • To the item “Cellular data”.
  • Make sure Cellular is enabled.

Important! If there are problems, then go to the settings, to the “General” section, select “Reset network settings” and restart the gadget.

The most common reason is the lack of internal memory of the device. New iOS requires at least 5 GB. In this case, it is obvious that you need to check the gadget for the presence of this space. If not, then allocate the available volume.

In terms of forced reboots, users discovered this bug when they first started updating to the new iOS. In this case, you need:

  • on iPhone 6S, press the Home and the Power / Power button at the same time. Hold until the Apple logo lights up on the screen;
  • on the seven, simultaneously hold down the volume down and power button. Similarly, wait for the logo to appear;
  • on eight and newer, first quickly press and immediately release the volume up button, then also quickly do this with the adjacent volume down button. Then press and hold the “Switch on” / “Switch off” button.

Important! On the latest versions, after rebooting, the system will additionally ask you to log in using your fingerprint.

Summing up the above, it turns out that the new software released in 2019 from Apple no longer supports the company’s smartphones released before 2014. Users of these gadgets, unlike others, have not received an update notification. Owners of iPhones 6s and above can install iOS 13 as standard through the settings or by connecting to iTunes on a PC. With the release of a fresh operating system, a test mode is also available to developers.

How to cancel an iOS 13 update that’s already downloading on an iPhone

If you started installing new software by mistake, or if you prefer the old software, you can always cancel the software download.

Additional Information

If the purpose for which you disable updates on the iPhone is to save traffic, I recommend looking into another section of the settings:

  • Settings. General. Content Update.
  • Disable automatic content updates for those applications that do not need it (those that work offline, do not sync anything, etc.).

If something does not work out or does not work as expected. leave questions in the Комментарии и мнения владельцев, I will try to help.

Distribution of new, sometimes interesting and useful materials from the remontka.pro website. No ads and free computer help for subscribers from the author. Other subscription methods (VK, Odnoklassniki, Telegram., YouTube, Yandex.Dzen)

I have all the update disabled, but still when I connect. they spend traffic on WI-FI. Why?

Lots of applications receive / send data regardless of whether updates are enabled. But in theory, not much.

I have a question for you, what is the difference between automatic downloads and updates from updating content?

Updating the content allows the application to “watch” from time to time what’s new on the Internet. For example, even a closed Instagram can check if there is anything new published by someone.

I turned off iOS auto-update, but it starts updating without warning. What to do?

Does not allow you to enter the application. I click on the application, and it starts updating. What to do?

Refresh. Some applications may just require updating and otherwise not work.

dear, I appreciate your portal for useful solutions, but this article contains false information. you can disable iOS updates only by installing the Apple TV profile (you can google tvos beta profile), which allows you to deceive the system. your instructions are not only useless, but also harmful (at the same time in the top of Google), because the “update” item disables application updates, the “applications” item disables the autoloading of purchased applications. fix something.

All Apple technology owners are constantly being pushed to update their software. This is how the company is fighting against the fragmentation of gadgets and firmware that Android suffers from, and is collecting amazing statistics for the next presentation. However, at the same time, our devices are slowly killing us so that we run after new and fast gadgets.

It turns out that you can turn off obsessive prompts to update iOS on any device, even without jailbreak.

Disable iOS and App Updates on iPhone

After the next iOS update appears, your iPhone will constantly remind you that it is time to install it. Application updates, in turn, are downloaded and installed automatically.

You can turn off iPhone and iOS system app updates using the following steps:

  • Go to “Settings” and open the item “iTunes and AppStore”.
  • In order to disable automatic download of iOS updates, in the “Automatic downloads” section, disable the item “Updates”.
  • In order to disable application updates, turn off the “Programs” item.

If you wish, you can turn off the update only over the mobile network, but leave them for Wi-Fi connection. use the “Cellular data for this” item (turn it off, and leave the “Programs” and “Updates” items on.

If at the time of performing the above steps, an iOS update has already been downloaded to the device, then despite the disabled updates, you will still receive a notification that a new version of the system is available. To remove it, follow these steps:

  • Go to Settings. General. iPhone Storage.
  • In the list that will load at the bottom of the page, find the iOS update that was downloaded.
  • Remove this update.

Why is it needed

Although Apple insists on the need to update the software on the device to the latest current version, we know that this is not always necessary.

For example, the first-generation iPad Air still does an excellent job and runs briskly on the latest versions of iOS. But after a couple of updates, he will start to think, lag and freeze. At the same time, the device will not receive all the new features of the system, which, as always, will only work on top models.

The situation is similar with the iPhone 6. The smartphone is still pretty good, but by iOS 11 Apple will definitely try to “kill” it in order to force the owners of the device to buy new models.

So why not just stop updating the firmware on your device?

If earlier it was possible not to connect an iPhone or iPad to iTunes, now the Over The Air update arrives on the device and reminds you of the need for an update every day. You have to regularly abandon the new firmware, and the files for updating have already been downloaded and take up space on the device.

There is an exit

Enthusiasts have come up with a curious way to cheat the iOS update system. Using a special profile, you can redirect your iPhone or iPad to the tvOS update server. The device will not find the required firmware there and will not offer to update.

Everything is simple and legal, the method will work on any device, even without jailbreak.

How to turn off automatic app updates on iPhone?

Go to the Settings menu

Go to iTunes Store, App Store

Scroll to the Automatic Downloads section

Deactivate the Update switch

Here, at the same time, you can turn off the automatic download of music and programs, which will help if you are an active user of several Apple devices. After turning off automatic app updates, which we just did, remember that all updates will have to be done manually from the App Store app. You shouldn’t worry, because if a new version of an application is released, a number will appear on it and you will understand that it is time to update.

If the automatic update is still to your liking, but you do not want to waste mobile traffic, then there is a solution in this case as well. Developers from Apple have provided the ability to automatically update applications only when you are actively connected to a Wi-Fi network and it is easy to activate this feature.

How to turn off automatic app updates on iPhone?

The charge of your iPhone simply flies before our eyes, mobile traffic is always at zero and you notice that applications never require updating? Congratulations, you’ve become hostage to one of the new iOS features. automatic app updates. In this article, we will tell you not only about how to disable this feature, but also give valuable advice on how to properly configure it.

In theory, the automatic app update feature is a very useful thing. But unfortunately, not all users have a cellular tariff that is tailored for downloading even small updates from the Web (not to mention multi-megabyte game updates). For others, the function may not be to their liking due to the lack of a sense of control, and it is always interesting to find out what kind of update came out for a favorite application. In any case, it is necessary to understand the function of automatic updating of applications on the iPhone.

How to set up automatic app updates on iPhone over Wi-Fi only?

Go to the Settings menu

Go to iTunes Store, App Store

Activate the Update switch

Turn off the Cellular Data toggle switch located at the very bottom of the screen

Done! Now, when you connect your smartphone to Wi-Fi, which, for example, is available at your home, your applications will be automatically updated and you will not have to think about the safety of mobile traffic once again.

How to turn off iOS updates on iPhone

Apple strives to ensure that your iPhones are always running the most current version of the iOS operating system. This desire is not difficult to understand. The fewer different versions are used by users, the fewer various problems arise with the compatibility of different programs and firmware.

But, for the user, the iOS update does not always play a positive role. It is not uncommon for older iPhones to work much slower after significant updates. This is proved by the history of such models as iPhone 6, iPhone 5, iPhone 5s, iPhone 4s and iPhone 4. Someone sees this as a malicious intent of Apple, someone thinks that this is a natural process, since with each new version of iOS it becomes much more complicated.

However, there is no official way to disable iOS updates. If earlier the user could simply not connect his iPhone to iTunes and updates did not bother him. Now updates arrive on the iPhone by air, take up space in the smartphone’s memory and regularly remind the user to install it. And if the user does not want to install the update, then all this can be very annoying.

Previously, in order to disable the iOS update on the iPhone, you had to use JailBreak. But, now there is an alternative way to bypass the system. The idea is that iOS can be tricked into specifying the wrong update server. Further detailed instructions on what you need to do in order to disable iOS updates on iPhone without using JailBreak.

READ  View of the monastic dwelling on the iPhone

Disable updates on iPhone

Remove already downloaded update.

If an update has arrived on your iPhone by air, then it must be removed before starting the whole procedure. This can be done in Settings in the section “General. Storage and iCloud. Manage (storage)”.

Here you need to find the downloaded iOS update for your iPhone and uninstall it. If there is no update, then it has not yet arrived by air and you can proceed to the next step.

Copy the link to the Safari web browser and save the profile.

After the downloaded iOS update is removed, you can proceed directly to disabling iOS updates on the iPhone. To do this, you need to copy this link:

  • hikay.github.io/app/NOOTA.mobileconfig

Then you need to open the Safari web browser, paste this link into the address bar and follow it.

As a result, you should be prompted to install a profile. We agree and click on the “Install” button.

When you save the profile, you will be asked to enter a password. Enter the password and continue.

Restart iPhone and check the result.

After installing the downloaded profile, you will be prompted to restart your iPhone. Click on the “Restart” button and wait for the device to boot.

After downloading, you need to check whether the updates are disabled or not. To do this, open the iPhone Settings and go to the “General. Software Update” section. If everything was done correctly, then there should be no updates here, iOS should tell you that your iPhone is using the latest software version.

If you want to return everything and still update iOS on your iPhone, then you just need to open Settings and go to the “General. Profiles” section. Here you just need to delete the tvOS 10 profile and restart your device. Then the updates will work as usual again.

Deactivating Updates on iPhone 5S | 6 | 6S | 7 | SE and other models

In the settings of Apple’s mobile operating system, it is indicated that updates for the OS and standard programs will be downloaded and installed automatically. But sometimes we do not approve of this approach, we do not want to see notifications that it is time to update. But the main reason why users want to disable functionality is to save precious Internet traffic. Of course, if you are connected to WI-FI, then the problem is not that.

After the next iOS update is released, the smartphone will not cease to “please” you with messages that will periodically appear on the screen. But you can get rid of the annoying effect like this:

  • Click on the icon with the inscription “Settings” on the main screen, when the list opens. scroll down a little and go to the “App Store” option. Here we see several switches:
  • If you need to refuse to automatically download patches, fixes, new versions of the system, then disable “Updates“. Suddenly you want to prohibit application updates. move the “Programs” lever to the left;
  • Please note that there is an option below that allows you to block downloads through a mobile Internet connection. In this case, the previous switches can not be touched, then the download will be performed exclusively when connected to the “free” Wi-Fi.

It may happen that the pack has already been downloaded to the smartphone, and now iOS constantly reminds you to install it. If you do not want to perform this action and intend to get rid of the messages, then you should reopen the parameters, enter the “General” section, then select “Storage” and find the downloaded update in the list of software, delete it:

Another way to save traffic on iPhone

How to turn off updates on iPhone. we figured it out. But there is another interesting point that many are not aware of. It will allow you to block background operations with applications (all at once or selected):

  • We open the main settings tab, after which we find the item “Content update” in the list, look at the list of software, enable / disable at our discretion:

How to turn off updates on iPhone for Apps, iOS and App Store

Many owners of “apple” smartphones are interested in the question. how to turn off updates on iPhone so that traffic does not sit down, save battery power? It would seem that the topic is very simple, but not everyone understands the settings of iOS 12 and earlier. Therefore, we decided to compose instructions in an understandable language with screenshots and videos.

I hope my instructions helped you solve another small problem on the iPhone / iPad. If so, please share an overview of the method on social networks.

How to turn off updates on iPhone

By default, iPhone and iPad automatically check for updates and download iOS and app updates. This is not always necessary and convenient: someone does not want to receive constant notifications about an available iOS update and install it, but a more common reason is unwillingness to spend Internet traffic on constant updates of numerous applications.

This tutorial details how to turn off iOS updates on iPhone (also works for iPad), as well as automatically download and install App Store app updates.

Disable iOS and App Updates on iPhone

After the next iOS update appears, your iPhone will constantly remind you that it is time to install it. Application updates, in turn, are downloaded and installed automatically.

You can turn off iPhone and iOS system app updates using the following steps:

  • Go to “Settings” and open the item “iTunes and AppStore”.
  • In order to disable automatic download of iOS updates, in the “Automatic downloads” section, disable the item “Updates”.
  • In order to disable application updates, turn off the “Programs” item.

If you wish, you can turn off the update only over the mobile network, but leave them for Wi-Fi connection. use the “Cellular data for this” item (turn it off, and leave the “Programs” and “Updates” items on.

If at the time of performing the above steps, an iOS update has already been downloaded to the device, then despite the disabled updates, you will still receive a notification that a new version of the system is available. To remove it, follow these steps:

  • Go to Settings. General. iPhone Storage.
  • In the list that will load at the bottom of the page, find the iOS update that was downloaded.
  • Remove this update.

Additional Information

If the purpose for which you disable updates on the iPhone is to save traffic, I recommend looking into another section of the settings:

  • Settings. General. Content Update.
  • Disable automatic content updates for those applications that do not need it (those that work offline, do not sync anything, etc.).

If something does not work out or does not work as expected. leave questions in the Комментарии и мнения владельцев, I will try to help.

Distribution of new, sometimes interesting and useful materials from the remontka.pro website. No ads and free computer help for subscribers from the author. Other subscription methods (VK, Odnoklassniki, Telegram., YouTube, Yandex.Dzen)

I have all the update disabled, but still when I connect. they spend traffic on WI-FI. Why?

Lots of applications receive / send data regardless of whether updates are enabled. But in theory, not much.

I have a question for you, what is the difference between automatic downloads and updates from updating content?

Updating the content allows the application to “watch” from time to time what’s new on the Internet. For example, even a closed Instagram can check if there is anything new published by someone.

I turned off iOS auto-update, but it starts updating without warning. What to do?

Does not allow you to enter the application. I click on the application, and it starts updating. What to do?

Refresh. Some applications may just require updating and otherwise not work.

dear, I appreciate your portal for useful solutions, but this article contains false information. you can disable iOS updates only by installing the Apple TV profile (you can google tvos beta profile), which allows you to deceive the system. your instructions are not only useless, but also harmful (at the same time in the top of Google), because the “update” item disables application updates, the “applications” item disables the autoloading of purchased applications. fix something.

Good day. Maybe someone knows how to turn off updating of adjacent windows on iPhone (7)? Previously, this was not the case, the information was saved when switching on different pages, and now when you go to any open page, the information is updated, very inconvenient. Thank you

Hello. This happens if there are a lot of tabs and there is not enough memory for everything, or in order to save energy. he is forced to unload them and update them later when returning.

How to uninstall the update on iPhone 6?

To uninstall the downloaded iOS update, follow our simple guide.

How to turn off auto update in iPhone | Stop automatic update in iPhone

  • Open the menu “Settings”. “General”. “iPhone Storage”.
  • Find the update you want to remove in the list.
  • Click the “Uninstall the update” button, then confirm the action in the dialog box that opens.

How to download an update over the cellular network on iPhone?

Update carrier settings on iPhone and iPad

  • Make sure your device is connected to Wi-Fi or cellular.
  • Open Settings General About This Device. If an update is available, you will be prompted to update your carrier settings.

How to disable automatic App Store updates?

How to enable / disable the automatic update feature in iOS

  • Open the Settings app.
  • Go to the iTunes Store & App Store.
  • Scroll to the subsection “Automatic downloads” and, depending on the need, activate or deactivate the items “Programs” and “Updates”.

How to update iPhone 6?

Updating your device wirelessly

  • Put the device on charge and connect to the Internet via Wi-Fi.
  • Go to the “Settings” “General” and then click “Software Update”.
  • Click Download and Install.
  • Click Install to start the update.
  • Enter a password if required.

When iOS 13 comes out on iPhone 6?

iOS 13 will be released on September 19 for iPhone 6S and newer models

How to turn off iOS updates at night?

If you decide to opt out of the update, you can do so even while it is still swinging. To do this, open iOS settings. General. Storage and iCloud usage. Manage. In this list, find the item related to the iOS update and click on it, then click Uninstall the update.

How to turn off the screen time password?

Reset your Screen Time passcode on your own device

  • Make sure your device is updated to iOS 13.4 or iPadOS 13.4 or later.
  • Select Settings Screen Time.
  • Click Change Screen Time Passcode, then click Change Screen Time Passcode again.

How to remove the iCloud password prompt?

How to disable password prompt for free apps on iOS

  • open the “Settings” menu of your device;
  • select the “Touch ID and Password” section;
  • put the “iTunes Store, App Store” switch to the “on” position (if the option is already selected, do it again);
  • enter the requested password from your Apple ID and confirm the entry with the “OK” button.
READ  How to change ID on iPhone

Why is the iPhone always prompts you to enter the password??

Open the Settings. iCloud menu and, when prompted, enter your account password. After creating a backup, the iOS device will no longer constantly inform you about the need to authorize or verify Apple ID. When the request to “enter the password” is frankly infuriating.

How to turn off screen time on iOS 13?

Go to the “Settings” menu on the iPhone, look for the “Screen Time” tab. go on it, scroll down all the way, there will be a button “Turn off screen time”. Press, after which it will stop working and be displayed.

How to factory reset iPhone 6 with buttons?

  • Press and release the volume up button.
  • Press and release the volume down button.
  • Press and hold the side button until the Apple logo appears.
  • So to implement a Hard Reset, you need to hold down the volume down and Power buttons until the Apple logo appears.

How to get rid of annoying iOS updates

The newest versions of iOS automatically remind users of the update they have, as a result, many simply cannot stand it and put the update. After that, the owners of old devices swear. why the iPhone 4s began to “slow down”. however, there is no turning back. If you don’t want to install an iOS update in any way, there is a way to get rid of annoying reminders.

An option for the lazy is to press “Later” when another reminder appears on the screen. But keep in mind that it will pop up again after 24 hours and you will have to select “Later” again. And again. So this option is relevant only for those who want to update, but a little later.

Another way is to delete the downloaded update file from the device. Open Settings, General, select Storage & iCloud. In the window that appears, in the “Storage” section, click “Manage”, find the update file and delete it.

But here, unfortunately, there are some pitfalls: as soon as the device connects to Wi-Fi, the update can download again. Therefore, be careful, or better, block the following addresses on your router:

This is a last resort, but effective in case you do not plan to install updates in the near future.

However, in most cases, the best way out of this situation is to update and not worry about notifications. Owners of iPhone 6 and above can safely ignore the instructions above.

I updated 4s to 9.2, it does not work very badly. I was also afraid, but how he worked on 8.2, it’s a fuck-up It’s better that way, well, he does not fly, he does not dull like on ios6. Like on ios7

When people start to renew themselves correctly. Through iTunes, holding down 2 buttons on the phone for ten seconds, and then release the lock button and hold the home button. Yes, it will erase everything from your iPhone, but it will erase errors too, so that errors do not appear again, click Set up as a new iPhone, and not download a backup copy from the cloud. (Sent from the AppleInsider.ru application)

How to disable iOS OTA update on iPhone and iPad without jailbreak

When the iPhone and iPad are connected to the Internet via Wi-Fi, updates for iOS are automatically offered for download and there is no way to disable this by standard means. Even if the user is not eager to install a new version of the OS.

Five years ago, with the launch of iOS 5, iPhone and iPad users were able to update their OS “over the air” through the so-called OTA update. Cumulative updates are downloaded wirelessly. the update process itself is performed on a mobile device without connecting to a computer.

This is definitely a big step forward, but at the same time, users of jailbroken devices and those who are waiting for a jailbreak got a headache, since installing a software update means the loss of the jailbreak and even the risk of getting a non-working device.

Below is information on how to prevent the iOS 10.2 jailbreak-blocking update from being downloaded on devices running iOS 10.1.1 and any other firmware, and how to prevent it from being automatically downloaded in the future.

How to turn off iOS updates on iPhone and iPad

In this article, we will tell you step by step how to disable / block notifications and iOS updates themselves “over the air” (OTA) on iPhone, iPod Touch and iPad without jailbreak.

It’s no secret that not all iOS updates are as successful and desirable as the Cupertin developers write about it in the description. Some of them can reduce the battery life, some. the speed of the device, which is especially important among owners of older devices. No one will force you to install iOS updates over the air (OTA. Over-the-Air), but intrusive pop-up notifications can come several times a day. How to get rid of them?

The essence of the method described below is to install a new system profile that will redirect the operating system not to servers with iOS updates, but to servers with updates for Apple TV (tvOS). Thus, the iPhone, iPod touch or iPad will check for updates on the server for the Apple TV (by the way, the server for the Apple Watch is also great for this role) and consider your current firmware the most current. In any case, it is safe and you can always delete the profile and update to the most current firmware. The only drawback of this method is that it is impossible to remove the red badge with a one on the settings icon and a similar icon in the General → Software update menu. On the other hand, this is much better than receiving pop-up system notifications or in general. after all, accidentally installing an unwanted update.

How to remove iOS update notification

How to turn off automatic iOS updatesHow to turn off automatic check and download of iOS updates

To disable automatic iOS updates, just install a profile. tvOS Beta Configuration Profile. open the link using Safari on your device.This profile does not affect the performance or battery life of your device in any way, you can always delete it and update to the latest, current version of iOS. After installing the profile, the “Feedback” icon will appear, the icon can be moved to any place away from the eyes.

How to remove a badge (unit) with available iOS updates

You need to back up your data using iTunes. Launch iBackupBot (the device must be connected to the computer).– Remove the badge (unit) from the “Basic”We go to the directory. / System Files / Home Domain / Library / PreferencesTurn off “Find iPhone / iPad” (Settings. iCloud. Find iPhone / iPad), after completing all the procedures, you can turn on “Find iPhone / iPad”.Open the file. com.Apple.Preferences.plist Find the line. kBadgedForSoftwareUpdateKey and change the value

Close the window and save the changes. Select the file. com.Apple.Preferences.plist and click Restore. OK

How to remove the one above the Settings app on iOS 12 that is terribly annoying

iOS 12.0.1, as a technical update, not only fixed several bugs, but also brought new ones. One of them is not critical, but it is definitely one of the most annoying. We are talking about a bug due to which a unit appears above the Settings application, which seems impossible to get rid of. In this manual, we talked about how to say goodbye to the hated label.

Here’s what to do

Delete the update downloaded to the device if it has already arrived by air. To do this, go to Settings. General. Storage and iCloud. Management (storage), find the update and delete it.

and go to it in Safari on your mobile device.

Save profile to iOS settings (password required).

Reboot iPhone or iPad when prompted by the system.

Now you can safely go to Settings. General. Software Update and check for a new version of iOS. The device will not find any updates and will report that the installed firmware version is current.

Unfortunately, the annoying red badge will not disappear, but these are little things.

CHIP How to disable and prohibit iOS updates on iPhone and iPad

All Apple technology owners are constantly being pushed to update their software. This is how the company is fighting against the fragmentation of gadgets and firmware that Android suffers from, and is collecting amazing statistics for the next presentation. However, at the same time, our devices are slowly killing us so that we run after new and fast gadgets.

It turns out that you can turn off obsessive prompts to update iOS on any device, even without jailbreak.

Why is it needed

Although Apple insists on the need to update the software on the device to the latest current version, we know that this is not always necessary.

For example, the first-generation iPad Air still does an excellent job and runs briskly on the latest versions of iOS. But after a couple of updates, he will start to think, lag and freeze. At the same time, the device will not receive all the new features of the system, which, as always, will only work on top models.

The situation is similar with the iPhone 6. The smartphone is still pretty good, but by iOS 11 Apple will definitely try to “kill” it in order to force the owners of the device to buy new models.

So why not just stop updating the firmware on your device?

If earlier it was possible not to connect an iPhone or iPad to iTunes, now the Over The Air update arrives on the device and reminds you of the need for an update every day. You have to regularly abandon the new firmware, and the files for updating have already been downloaded and take up space on the device.

There is an exit

Enthusiasts have come up with a curious way to cheat the iOS update system. Using a special profile, you can redirect your iPhone or iPad to the tvOS update server. The device will not find the required firmware there and will not offer to update.

Everything is simple and legal, the method will work on any device, even without jailbreak.

How to get everything back

To redirect the device back to the correct update server, just uninstall the installed tvOS 10 profile by going to Settings. General. Profiles.

After rebooting, the smartphone or tablet will see all available firmware updates.

NNCXV.INFO 2021