You can check the status of the device’s connection to the iPhone by the color of the Bluetooth icon in the upper right corner of the status bar, as shown in the screenshot: podkluchenie ustroistva:
- black. bluetooth is on and the accessory is connected to your smartphone;
- gray. bluetooth is activated, but no accessory is connected;
- no icon. bluetooth is off or iPhone is not paired with any device.
To disconnect all unnecessary devices, go to “Settings” → “Bluetooth”, to the right of the device name, click on the button with the “!” Icon, then select “Disconnect”.
In case you never plan to connect a bluetooth accessory again (for example, you sold it or gave it to a friend), you should “remove the pair” or disconnect the pairing. To do this, go to the same screen as when you disconnected the device, but click “Forget This Device”. Next, confirm your action by tapping on the “Forget Device” button.
Now wait until you return to the previous screen. you will see that the forgotten device is no longer displayed in the “MY DEVICES” list.
I hope, after reading this manual, you figured out how to use bluetooth on iPhone for its main purpose.
How to set up a bluetooth connection
Let us remind you that the bluetooth protocol has been supported in Apple smartphones since the iOS 3.1 operating system, and in the first generation iPad since the very beginning, since version 3.2. IPhone’s Bluetooth is used for wireless pairing with a variety of native and third-party devices. Among them are keyboards, headphones, headsets, speakers and even car stereos. Before buying and using a bluetooth device, you should check if your iPhone model supports bluetooth.
Here I will write in detail about how to connect a bluetooth device to an iPhone and show it in the screenshots of the 5s model with iOS 9.2.1:
- Place the smartphone and the device to be connected next to each other (preferably at a distance of no more than 1 m).
- Make sure your iPhone has the latest available iOS version and that the batteries of both devices to be paired are charged.
- Find the “Settings” icon on the desktop and tap on it.
- Wait for bluetooth to find the device and display its name. Click on the name you want.
- Enter a passkey (PIN) if prompted. It must be specified in the documentation of the manufacturer of the connected device.
- Wait until the “Connected” status appears to the right of the accessory name.
That’s all: now feel free to start using your device for its intended purpose. Alternatively, you can pair your iPhone with several more bluetooth accessories by following the steps above.
How to bypass bluetooth file sharing ban
Many users of “apple” smartphones with jailbreak have some ability to exchange files via bluetooth, bypassing the official ban from Apple. The iBluetooth program and the AirBlue Sharing tweak allow you to do this. Both applications are paid and available in Cydia, but for iBluetooth you can get a temporary demo access for a week. Read more about them by clicking on the links with the names of the utilities. Have you ever watched Russian mature porn? Please note that often in porn, Russian aunts have sex with guys much younger than themselves. You can find similar scenes of sex with Russian mothers at the link https: //moms.org/russkie. Be sure to visit this site to broaden your sexual horizons. This will be useful for both you and your partner, especially if she is older than you (mom / milf / mature). After that, you will get a complete picture of how to use bluetooth on iPhone: for sure everything will be easier than you imagined!
Bluetooth: possibilities for the iPhone
It’s no secret for modern gadget users that bluetooth is a damn useful feature. With it, you can exchange different files, as well as connect many accessories and devices. And all this without the annoying wires that you constantly have to unravel! However, in iPhone with original firmware it is possible to use bluetooth only in the second way. The limitation on how to use Bluetooth on iPhone is due to Apple’s security policy, which aims to prevent copyright infringement.
Why the phone does not see the Bluetooth headset
I have extensive experience in setting up and connecting access control systems (ACS) and time attendance systems. And also I am engaged in setting up servers, computers, workstations. I work as an engineer at Technootkrytie.
How to connect a wireless device
To connect a device, you must first check if the accessory is compatible with your iPhone model. Then you need to perform the following operations:
- Before turning on Bluetooth on iPhone, turn on the third-party headset and activate the Bluetooth-module with discoverable mode in it, carefully following the instructions. Then we start setting up the connection.
- Activate Bluetooth on iPhone. To do this, you need to enter the main menu, go to the “Bluetooth” tab and hold the green slider in active mode.
You can also turn on Bluetooth in a faster way. call the control point by swiping your finger from the bottom up on the screen (lift the shutter), select the desired icon and click on it.
To check the activity of the Bluetooth module, you need to pay attention to its icon in the upper right corner of the display. If it is white or black, the module is active, if it is gray, it is not enabled.
- The iPhone will start scanning and show active wireless devices within range, which is about 10 meters. Select the desired accessory and connect to it by enabling Bluetooth pairing.
- The device is connected to a smartphone and is ready to use.
This connection will be saved in the iPhone’s memory, so you only need to activate Bluetooth on the devices to reuse the accessory. Pairing will be done automatically.
In order to disconnect an unnecessary device, in the Bluetooth settings select it from the list of connected equipment and click “Disconnect”. Play for little money in online casinos from 10 rubles on popular slot machines from Novomatic.
In the future, you can instantly resume the connection. If you no longer intend to pair with this accessory, select “Forget device” in the settings menu.
What is the danger of using pirated applications
Jailbreaking the iOS system allows you to use the hidden capabilities of the device, but you also need to take into account the disadvantages of jailbreak:
- Pirated apps crash much more often than official ones.
- Hacking may impair the performance of official apps.
- Thoughtless installation of tweaks can lead to the inoperability of iOS, since they do not pass the moderation of specialists.
- Incompatibility of individual tweaks.
- Jailbreak compromises the security of the user’s personal data.
- There may be problems with updating iOS, the need for a complete flashing of the device.
Therefore, it is highly undesirable to hack the system and use pirated applications to work with iOS devices.
Bluetooth features in Apple products
Connecting various devices, which are becoming more and more with the development of technology, is what you need Bluetooth in the iPhone. You can connect with it:
- telephone headsets;
- wireless headphones;
- audio and video equipment (some TVs, docking stations, car tape recorders);
- Smart bracelets and watches;
- various devices for the “smart home” (lamps, door locks, heating system).
The main causes of device connection failures include:
- discharged batteries on any of the mating gadgets;
- disabled Bluetooth on one of the devices;
- too much distance between devices;
- obstacles to communication (for example, a wall);
- functional malfunctions of Bluetooth.
In the latter case, to fix the problem, you can turn both devices on and off, or delete the Bluetooth pair and create it again. Also, before using Bluetooth on the iPhone, you can update the software on the device to the latest version.
Is it possible to transfer files from iPhone using Bluetooth
As we said, there is no legal transfer of files over Bluetooth to the iPhone. The fact is that Apple is very serious about the observance of copyright for programs, pictures and music, and also considers the exchange of unapproved files unsafe, violating the protection of the operating system from viruses and other factors.
IPhone 5 and newer has a special AirDrop technology that allows you to exchange files between two Apple devices (iPod, iPad, iPhone, OSX).
- Run “Airblue sharing” and find the appropriate program.
- Install the tweak on your device.
- The program is ready to use, you can transfer files via Bluetooth using it.
To transfer data via Bluetooth, you can use any file managers that have the “Open file in” function. Sending files is possible to devices with different operating systems: Android, iOS, Blackberry OS, Windows Phone, as well as OS X, Linux and Windows. In order to exchange data with an iPhone or other iOS device, you need to have a similar file manager and a tweak on it.
Why does the iPhone need Bluetooth
Apple products differ from devices of other companies in many advantages, the main of which are constant system updates and a reliable data protection system. But still, the main set of functions and capabilities is the same for all gadgets from different manufacturers. All smartphones and tablets have Bluetooth technology, one of the functions of which is wireless data transfer between devices. However, it is this Bluetooth function on the iPhone that is excluded. the developer explains this by copyright protection of the information. Let’s figure out the question that at the dawn of the appearance of “apple” devices in our open spaces was asked by all users. then why do we need Bluetooth on the iPhone?
Hello, first try connecting the headphones to another device, see if you can connect or not. So let’s say that the problem can be in the headphones and in the phone, you need to look by the method of elimination. And so bring it, we’ll see and check everything. Diagnostics is free in any case))
Hello, try connecting the speaker to another device
Good day. the bracelet may be defective. try to contact the seller
Good afternoon, a chip replacement is required. price 2500 r
How to connect iPhone and device via Bluetooth
Bluetooth on iPhone cannot find devices in some cases due to incorrect connection. Consider, how to connect wireless headphones to iPhone and other equipment.
- Open smartphone settings, go to “Bluetooth”.
- Set the switch to active position.
- Select the desired device from the list provided and click on it.
Good day! Try to find a solution on the Internet, or come to our office. Thank you!
hello, try to reconnect them, or try with another device.
How to set up a Bluetooth connection
Immediately, we note that you can connect to the iPhone via Bluetooth devices made not only by Apple. For example, headsets from the well-known company Jabra work well with iPhones.
About whether the device is compatible with “apple” gadgets, you need to ask a consultant when buying. If you buy online, you should first make sure that the device supports profiles corresponding to a certain iPhone model on your own. The required profiles are available on this page.
Connect iPhone to device via Bluetooth as follows:
Make sure both devices are charged and position them so that the distance between them does not exceed 10 meters.
Activate the Bluetooth module on an additional device. how to do this is described in the instructions from the manufacturer.
In the iPhone Settings menu, find the Bluetooth section and go to it.
Move the slider opposite “Bluetooth” to the active position.
You can activate Bluetooth in another way: call the “Control Center” with a swipe from bottom to top and click on the icon with the corresponding symbol.
The fact that Bluetooth is turned on can be recognized by the following signs:
Wait for the iPhone to complete the search, and click on the name of the desired device in the “Devices” section.
Enter the PIN. you can find it in the documentation that came with the connected device. If you can’t find the password (which is quite possible, since the documentation is compiled in the manufacturer’s language), try simple combinations like 0000 or 1234.
After the device is connected, the status opposite to its name will change to “Connected”. In the future, you will not have to enter the password again. the iPhone will remember the pairing.
It is recommended to turn off Bluetooth immediately after the end of the session, otherwise the iPhone battery will be consumed very quickly.
Why Bluetooth on iPhone comes in handy
Bluetooth on Apple gadgets is necessary primarily to connect various additional devices. namely:
In addition, AirDrop technology uses a combination of Wi-Fi and Bluetooth, which makes it possible to wirelessly exchange data between owners of Apple devices. Learn more about AirDrop technology here.
Is it possible to bypass the ban on file sharing via Bluetooth
Apple does not allow users to transfer data over Bluetooth for two reasons:
However, despite Apple’s disapproval, it is possible to send files via Bluetooth. however, to do this, you first have to jailbreak the device. Next, you need to download one of three tweaks from Cydia, each of which is paid.
How To Turn On Bluetooth On Your iPhone
IBluetooth tweak. It is small in size (weighs just over 200 Kb) and very simple utility. To transfer data, you need to activate Bluetooth in the iPhone settings, then go to iBluetooth and select the image to be sent through this application. The user of the tweak is given a demo period of 7 free days. during this period the user must make sure that the program is effective. The price of the full version of the utility is 3.99.
AirBlue Sharing tweak. This tweak is not cheap. it costs 4.99. However, users who are forced to constantly transfer files “over the air” will certainly be satisfied with the simplicity of this program. No settings are required. the iPhone owner only needs to long press on the desired file, and a window will appear prompting you to select the device to which the message will be sent.
If another user wants to transfer a photo to you via Bluetooth, a request to accept the file will appear on the screen of your AirBlue Sharing gadget.
Thanks to the AirBlue Sharing tweak, the iPhone owner will be able to exchange data not only with other owners of Apple gadgets, but also with Android, Windows Phone, BlackBerry OS users.
Tweak Celeste 2. This tweak is the most expensive: its price is about 7 dollars. Such a high cost is probably due to the fact that the program is integrated with the Gremlin service, which makes it possible to quickly transfer received files to the standard iOS media library. Celeste 2 App Available From BigBoss Repository.
Using Celeste 2 is also very simple: you just need to select a file to transfer, open the Share menu and click on the Send with Celeste button.
You can control the transfer of data in the “Notification Center”. The application will notify that the sending has been successfully completed with a special banner.
How to use Bluetooth on iPhone?
The owners of the iPhone, detecting Bluetooth in the gadget’s settings, are perplexed: it is known that transferring data wirelessly from the iPhone is possible only to other Apple devices thanks to the AirDrop function. So why do you need Bluetooth on Apple devices?
How to disconnect a device from Bluetooth
Disconnecting from Bluetooth iPhone should be done as follows:
Go to the “Bluetooth” settings section.
Click on the icon with the letter “i” opposite the name of the connected device.
Click on the “Disconnect” button.
If you no longer intend to use the device with which your iPhone is paired, you can remove the pair. For this:
Click the “Forget This Device” button below “Disconnect”.
Confirm that you want to break the pairing. in the menu that appears, click on “Forget Device”.
When you return to the previous iPhone screen, you will see that the name of the disabled device no longer appears in the “My devices” section.
Bluetooth does not work on iPhone: what to do?
Bluetooth is a fairly simple technology, so the reasons why a Bluetooth headset does not connect to an iPhone are usually prosaic:
iPhone / iPad Bluetooth Settings
The user forgot to turn on the device or simply did not figure out how to do it. The battery on the device or on the iPhone itself is low. The user has placed the devices too far apart. There is an obstacle between the devices, through which the signal cannot penetrate (for example, a wall). An outdated iOS version is installed on the gadget, or the device is simply not compatible with the iPhone of this modification.
An iPhone user who has encountered problems when connecting via Bluetooth is advised to restart both devices and update his gadget to the latest current version of the operating system (if necessary). If such measures did not help, you need to delete the created pair and establish a new pairing.
How to set up Bluetooth on iPhone?
Turning on Bluetooth on the iPhone is actually quite simple. To complete this procedure and start using the technology, follow the guide below:
1 Place the devices within 10 meters of each other, make sure they are charged. 2 Turn on Bluetooth on the device to which you will connect according to the operating instructions supplied with it. 3 Turn on Bluetooth on the iPhone. open “Settings”, tap the Bluetooth section, activate the slider opposite the position of the same name. Turning on will be signaled by the icon next to the charge indicator. 4 When Bluetooth is turned on, the iPhone will automatically start searching for devices available for connection, after completing this process, it will display the found ones. to create a Connect with the device of interest, tap on it in the list of found ones. 5 When you try to connect, you will be prompted for a PIN-code. it must be specified in the documentation for the device with which you are trying to establish a connection. If there is no such information, try simple codes. 0000, 1111, 1234. If you cannot find the combination, you will need to contact the device manufacturer. 6 After entering the PIN-code, after a few moments opposite the device to which you are connecting, the message “Connected” should appear.
To quickly turn on Bluetooth. open the quick access shutter (“Control Center”) by swiping from the bottom up and select the corresponding icon.
How to set up and start using Bluetooth on iPhone
“Is there Bluetooth (Bluetooth) on the iPhone”? On the one hand, the question is very strange. how can one of the most advanced modern smartphones lack support for one of the most popular wireless technologies today? But on the other hand, it is logical, since iOS. the platform on which all i-gadgets work. is supported by a closed policy and copyright protection, what kind of file exchange between devices can we talk about? However, we recall that Bluetooth is used not only for file exchange. Connect using this technology is also used to connect devices with wireless headphones, headsets, “smart” video equipment, for example, Smart TVs, etc.
Thus, the answer to the question. “Is there Bluetooth support on the iPhone”. sounds like this. “Yes, but the functionality of the technology is somewhat limited.” You will not be able to use it to transfer this or that file to another smartphone, however, contact, say, a headset. please, and not only with the native one, but also with the one released by third-party developers.
How to enable Bluetooth on iPhone, what to do if it does not work, we will figure it out in this article. We will also reveal a little secret. we will tell you in what cases Bluetooth still allows you to exchange content.
How to use Bluetooth on iPhone
Apple product owners can boast a variety of features on their smartphones, including the extraordinary feature of identifying their owner’s fingerprints. But many users do not understand what Bluetooth is for in the iPhone. if, when trying to transfer files from iPhone to any other device, a message pops up on the screen stating that the transfer is impossible due to copyright infringement on this information. But wireless file exchange between two devices is the main function of all bluetooth devices. However, in this case, knowing why the iPhone needs a jailbreak will not be needed. Let’s try to deal with bluetooth.
What is a Bluetooth module for iPhone for?
Bluetooth on the iPhone is needed primarily in order to be able to connect a number of devices to it, from special Bluetooth headsets to receive calls and ending with special heart monitors, which are presented on the official Apple website. Well, more specifically, via Bluetooth, the iPhone can connect to the following devices:
How to connect a Bluetooth device to an iPhone
First of all, you need to make sure that the purchased wireless accessory is compatible with the model of this device (after all, there are situations when the devices simply “do not see” each other).
Then, following the instructions, you should activate the Bluetooth module on the device to which you plan to connect the iPhone.
After that, you will need to turn on the same module on the iPhone, as a result of which the smartphone will scan for the presence of an active Bluetooth accessory within its range (about 10 meters) and connect to it, asking the user for permission to create a connection.
In conclusion, it should be said that Bluetooth in the iPhone, as it turned out, is an incredibly necessary thing, although it does not perform the functions that everyone is used to. And, by the way, files via Bluetooth on this gadget can also be transferred, although this will require a little “tricking the system”, but this is a completely different topic of conversation.
What to do if Bluetooth doesn’t work?
You connected according to the above instructions, but the connection failed? Don’t worry, it happens, and usually the problem is easy to fix. We offer a simple troubleshooting guide:
1 Move the devices closer together. You see, the range of Bluetooth on the iPhone is 10 meters, but not every third-party device can boast such a good connection area. If at a distance of 2-3 meters the connection does not work out, go to the second point. 2 Reboot the device you are trying to connect to and re-enable Bluetooth on it. Do the same with the iPhone. 3 Didn’t help? If so, try the following scheme. If you have already connected to a device with which you cannot contact now, tap on the button with the letter “i” opposite it and select “Forget this device”. Then try again to find it and connect. 4 Another step. already from the category of cardinal. is to reset the network settings. To perform it, open “Settings”, then “General”, find the “Reset” section, tap on it and select “Reset network settings”. What’s the use of this measure? Then try performing a full reset (the “Reset all settings” item in the “Reset” menu), just save a backup copy of the device using iCloud or iTunes.
In the event that it was not possible to establish a Bluetooth connection after completing all the steps of the above instructions, most likely one of the devices has a damaged Bluetooth module. How to check which one? Try to connect another device to the iPhone, if the connection is made, then the reason is not in the smartphone, but in the connected gadget. Phone not responding to any of the Bluetooth enabled devices? Then the problem is obvious on the side of the i-device and you need to send it to the service for diagnostics.
It is very easy to terminate a Bluetooth connection. You need to tap on the circle with the letter “i” inside opposite the device you want to disable and select “Disable”. If you no longer plan to ever establish a connection with the device to be disconnected, select the “Forget this device” item.
What a miracle AirDrop?
At the beginning of the article, we said that data exchange between an i-smartphone and another device via Bluetooth is impossible, but this is not entirely true. It became incorrect in 2013, when Apple introduced iOS 7. The system acquired a host of new options, including the so-called AirDrop. True, it became available not for everyone who updated to the seventh iOS, but only for users of the iPhone 5 and newer models of i-smartphones.
What did this option give users? The coveted ability to exchange files between devices via Bluetooth. Of course, using AirDrop, you can not share all categories of content (for example, you can transfer photos, but you cannot transfer music), and, in addition, if you have an iPhone 4S and an older i-smartphone, this option is not available to you at all, but some. but progress in the issue of file sharing via Bluetooth Apple can still be counted. Yes, and one more limitation. AirDrop uses not only Bluetooth, but also Wi-Fi for communication between devices.
Want to AirDrop a file? Select this file and in the menu that opens, tap the AirDrop item. in this case, if the option is not enabled, the iPhone will ask your permission to enable it. allow it and in a few seconds a list of available devices will appear in front of you, select the recipient and the file will be sent.
iPhone supports Bluetooth technology, but with limited functionality. It is possible to establish contact with a wireless headset, headphones and other similar equipment without any problems, but in the matter of data exchange between devices, everything is strictly.
On the iPhone 5 and newer i-smartphones, some categories of content can be transferred via the AirDrop option, but users of the iPhone 4S and older models have only one way out to exchange files with another device. to jailbreak the device. However, is it worth it if the desired file, in the end, can be easily sent through a messenger, social network or by mail!
Why Bluetooth does not work on iPhone. causes of malfunctions
Even the most expensive and advanced equipment is not immune from hardware breakdowns and software failures. This also applies to flagship smartphones from the world famous Apple company. Despite their price, iPhones and iPads break down exactly the same way as Xiaomi budget phones. Their difference is that for repairs, like for a brand, you sometimes have to pay many times more. Along with the problems of disconnecting the Internet, the inability to catch the Network and frequent overheating, “apple” products often suffer from various problems with the Bluetooth module, its constant shutdown and the lack of finding devices for pairing. This article will tell you what to do if Bluetooth does not work on iPhone and why Bluetooth does not turn on on iPhone, despite the physical health of the module.
Symptoms of Bluetooth Malfunction on iPhone
The main signs that make it clear that the Bluetooth module is inoperative for as yet unknown reasons are:
- inability to turn on Bluetooth communication and create a network. Even if the slider is switched to the Active state, the adapter may not work;
- search for wireless networks does not work correctly. The function seems to be on and seems to be working, but the search for devices is difficult and only at a very close distance;
- iPhone doesn’t want to find available devices. Again, the function works and the search takes place, but the list of found devices is always empty. Apparent malfunction of the adapter transmitter;
- the gadget finds other phones, but does not want to connect to them. There is a software malfunction or the inability to provide feedback with the network due to damage to some components of the adapter or another chip;
- iPhone freezes while turning on Bluetooth discovery. The program does not see the module or it cannot receive feedback from it.
The cause of the malfunction may be moisture trapped in the case.
Types of Bluetooth breakdowns on iPhone
There are two types of Bluetooth breakdowns on the iPhone:
- software, when malfunctions are caused by conflicts in the operating system software or applications installed by the user;
- hardware, consisting in physical layer problems, that is, directly connected by the bluetooth module located on the iPhone motherboard.
You can disable and enable technology on iPhone 11 directly from the notification shade
The first type of breakdown, as you might guess from its name, is associated with programs and their components, or rather with their conflicts. Often the problem appears due to a software failure that happens on its own and is one-time or permanent. Accumulated application processing errors and failures in the operation of the operating system can be superimposed in such a way that one or another component simply cannot start working or does not work correctly.
This also includes low-quality phone firmware. Perhaps the phone had to be reflashed, but this was done not by a specialist from an official service center, but by a simple amateur. As a result of these actions, the system could “stand up” incorrectly, and some adapters simply did not receive their drivers, without which they cannot function.
Important! It is always worth contacting only specialized service centers or places with a good reputation and guarantees of quality of service. This concerns not only repairs, but also flashing or setting up individual components of the operating system.
Sometimes finding out the reason for the breakdown of the Bluetooth module on the iPhone can be quite problematic
Installing inappropriate apps could also affect Bluetooth functionality on iPhone. Some software makes changes to the system, and they are not always well received by the latter, preventing it from working. It is necessary to review the list of all recently or long-term installed applications and determine the root of all evil.
Hardware bugs are usually due to a factory defect, which is unlikely for an iPhone, or a phone mishandled or neglected. Even once falling on a hard surface, a gadget can damage its microcircuits and contacts that connect individual components inside the case. Hence the malfunction. Don’t forget about moisture. If it gets inside the case, it oxidizes the metal and prevents electric current from passing normally into certain chips. A de-energized Bluetooth module will be of little use.
You can connect the gadget with another device by creating a pair right in the bluetooth setting
It may be that while charging the iPhone, a short circuit and sudden power surges occurred. This is quite enough to spoil some elements of the circuit and adapters.
For your information! Hardware problems also include extreme heat. If the device has been lying on a hot surface for a long time under the influence of direct sunlight, it may well have broken somewhere. The reverse of overheating is the case. frostbite, which has the same negative impact on the phone as a whole.
The main purpose of Bluetooth technology for iPhone is to connect a wireless headset
How to enable and configure Bluetooth on iPhone
Turning on and setting up Bluetooth on iPhone is easier than it sounds. To do this, follow the step-by-step steps:
- Go to the main menu of the phone and find the “Settings” icon.
- Select the “Bluetooth” item and activate the function by switching the slider to the “On” mode. It will turn green.
- Wait until the network is scanned for devices available for pairing.
- Connect to them by clicking on their name. Long press allows you to perform additional actions for the found gadgets.
This will pair the iPhone with any other device. You can then use all the Bluetooth capabilities.
You can break the pair. To do this, click on the information icon, which looks like the Latin letter “i” in a circle and is located to the right of the name of the found device. Then the “Forget this device” item is selected, and the device completely disappears from the list of found.
Note! You can turn it back by putting the iPhone into discovery mode, clicking on the name of the required device and clicking “Create a pair”
IPhone 6s uses Bluetooth 4.2. far from the latest standard
Causes of Bluetooth Issues on iPhone
As already mentioned, there can be two reasons for Bluetooth malfunctions on any iPhone model: software and hardware. In general, problems are associated with such moments:
- bugs and glitches in software and operating system. Most often, they occur when updating any components of the OS or its entirety, when drivers have not been installed on certain hardware. The latter cannot work without them and turn into simple pieces of iron. Failures are most often caused by accumulated system debris from standard applications or software installed by the user. The easiest and most popular way to solve them is to perform a system cleanup, reset network parameters, or simply reboot;
- inappropriate or outdated firmware. Sometimes you have to reflash your gadget. People, trying to save money, turn to unskilled craftsmen for help, who do the work literally on their knees. You should not expect anything good from this, because they do not have access to the latest versions of the OS and the latest drivers for adapters and other components;
- installation of problem programs. There is a software that all the time wants to get into the iPhone settings and change them for better performance. Such actions may well create a conflict between the standard settings and the settings of the user application, which will cause errors in the operation of Bluetooth;
- violation of the integrity of the motherboard contacts. As mentioned above, certain careless actions with the phone can disable individual chips and the entire device in an instant.
You can even pair with bluetooth with a special Home button
Note! If problems arose due to software, then you should look for conflicting applications, as well as check the phone’s memory for viruses and malware. They are usually embedded in regular and unremarkable applications downloaded from unverified sources.
Motherboard crashes are usually caused by the following:
- iPhone dropped onto a hard surface from a sufficiently large height;
- impact on the device of short circuits and voltage surges during the next recharge;
- using the phone in a temperature range that does not meet the maximum specified by the developers;
- ingress of moisture into the housing and the onset of corrosion processes and oxidation of metal contacts.
Officially sending graphic and audio files from iPhone to other gadgets will fail